qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 13:44:03 +02:00
Code
2c3c04e7bb
openwrt-xburst/target/linux/ubicom32/patches-2.6.28/100-ubicom32_support.patch
nbd 8d5bbbd479 ubicom32: remove some more unnecessary stuff from the kernel patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-26 22:49:03 +00:00

48751 lines
1.3 MiB
Raw Blame History

--- /dev/null
+++ b/arch/ubicom32/crypto/aes_ubicom32.c
@@ -0,0 +1,458 @@
+/*
+ * arch/ubicom32/crypto/aes_ubicom32.c
+ * Ubicom32 implementation of the AES Cipher Algorithm.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include "crypto_ubicom32.h"
+#include <asm/linkage.h>
+
+struct ubicom32_aes_ctx {
+ u8 key[AES_MAX_KEY_SIZE];
+ u32 ctrl;
+ int key_len;
+};
+
+static inline void aes_hw_set_key(const u8 *key, u8 key_len)
+{
+ /*
+ * switch case has more overhead than 4 move.4 instructions, so just copy 256 bits
+ */
+ SEC_SET_KEY_256(key);
+}
+
+static inline void aes_hw_set_iv(const u8 *iv)
+{
+ SEC_SET_IV_4W(iv);
+}
+
+static inline void aes_hw_cipher(u8 *out, const u8 *in)
+{
+ SEC_SET_INPUT_4W(in);
+
+ asm volatile (
+ " ; start AES by writing 0x40(SECURITY_BASE) \n\t"
+ " move.4 0x40(%0), #0x01 \n\t"
+ " pipe_flush 0 \n\t"
+ " \n\t"
+ " ; wait for the module to calculate the output \n\t"
+ " btst 0x04(%0), #0 \n\t"
+ " jmpne.f .-4 \n\t"
+ :
+ : "a" (SEC_BASE)
+ : "cc"
+ );
+
+ SEC_GET_OUTPUT_4W(out);
+}
+
+static int __ocm_text aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
+
+ uctx->key_len = key_len;
+ memcpy(uctx->key, in_key, key_len);
+
+ /*
+ * leave out HASH_ALG (none = 0), CBC (no = 0), DIR (unknown) yet
+ */
+ switch (uctx->key_len) {
+ case 16:
+ uctx->ctrl = SEC_KEY_128_BITS | SEC_ALG_AES;
+ break;
+ case 24:
+ uctx->ctrl = SEC_KEY_192_BITS | SEC_ALG_AES;
+ break;
+ case 32:
+ uctx->ctrl = SEC_KEY_256_BITS | SEC_ALG_AES;
+ break;
+ }
+
+ return 0;
+}
+
+static inline void aes_cipher(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
+{
+ const struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm);
+
+ hw_crypto_lock();
+ hw_crypto_check();
+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
+
+ aes_hw_set_key(uctx->key, uctx->key_len);
+ aes_hw_cipher(out, in);
+
+ hw_crypto_unlock();
+}
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ aes_cipher(tfm, out, in, SEC_DIR_ENCRYPT);
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ aes_cipher(tfm, out, in, SEC_DIR_DECRYPT);
+}
+
+static struct crypto_alg aes_alg = {
+ .cra_name = "aes",
+ .cra_driver_name = "aes-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cia_setkey = aes_set_key,
+ .cia_encrypt = aes_encrypt,
+ .cia_decrypt = aes_decrypt,
+ }
+ }
+};
+
+static void __ocm_text ecb_aes_crypt_loop(u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ aes_hw_cipher(out, in);
+ out += AES_BLOCK_SIZE;
+ in += AES_BLOCK_SIZE;
+ n -= AES_BLOCK_SIZE;
+ }
+}
+
+static int __ocm_text ecb_aes_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes, u32 extra_flags)
+{
+ const struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
+ int ret;
+
+ struct blkcipher_walk walk;
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ ret = blkcipher_walk_virt(desc, &walk);
+ if (ret) {
+ return ret;
+ }
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
+ aes_hw_set_key(uctx->key, uctx->key_len);
+
+ while (likely((nbytes = walk.nbytes))) {
+ /* only use complete blocks */
+ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
+ u8 *out = walk.dst.virt.addr;
+ u8 *in = walk.src.virt.addr;
+
+ /* finish n/16 blocks */
+ ecb_aes_crypt_loop(out, in, n);
+
+ nbytes &= AES_BLOCK_SIZE - 1;
+ ret = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ hw_crypto_unlock();
+ return ret;
+}
+
+static int ecb_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT);
+}
+
+static int ecb_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT);
+}
+
+static struct crypto_alg ecb_aes_alg = {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "ecb-aes-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = ecb_aes_encrypt,
+ .decrypt = ecb_aes_decrypt,
+ }
+ }
+};
+
+#if CRYPTO_UBICOM32_LOOP_ASM
+void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ asm volatile (
+ "; set init. iv 4w \n\t"
+ " move.4 0x50(%0), 0x0(%3) \n\t"
+ " move.4 0x54(%0), 0x4(%3) \n\t"
+ " move.4 0x58(%0), 0x8(%3) \n\t"
+ " move.4 0x5c(%0), 0xc(%3) \n\t"
+ " \n\t"
+ "; we know n > 0, so we can always \n\t"
+ "; load the first block \n\t"
+ "; set input 4w \n\t"
+ " move.4 0x30(%0), 0x0(%2) \n\t"
+ " move.4 0x34(%0), 0x4(%2) \n\t"
+ " move.4 0x38(%0), 0x8(%2) \n\t"
+ " move.4 0x3c(%0), 0xc(%2) \n\t"
+ " \n\t"
+ "; kickoff hw \n\t"
+ " move.4 0x40(%0), %2 \n\t"
+ " \n\t"
+ "; update n & flush \n\t"
+ " add.4 %4, #-16, %4 \n\t"
+ " pipe_flush 0 \n\t"
+ " \n\t"
+ "; while (n): work on 2nd block \n\t"
+ " 1: lsl.4 d15, %4, #0x0 \n\t"
+ " jmpeq.f 5f \n\t"
+ " \n\t"
+ "; set input 4w (2nd) \n\t"
+ " move.4 0x30(%0), 0x10(%2) \n\t"
+ " move.4 0x34(%0), 0x14(%2) \n\t"
+ " move.4 0x38(%0), 0x18(%2) \n\t"
+ " move.4 0x3c(%0), 0x1c(%2) \n\t"
+ " \n\t"
+ "; update n/in asap while waiting \n\t"
+ " add.4 %4, #-16, %4 \n\t"
+ " move.4 d15, 16(%2)++ \n\t"
+ " \n\t"
+ "; wait for the previous output \n\t"
+ " btst 0x04(%0), #0 \n\t"
+ " jmpne.f -4 \n\t"
+ " \n\t"
+ "; read previous output \n\t"
+ " move.4 0x0(%1), 0x50(%0) \n\t"
+ " move.4 0x4(%1), 0x54(%0) \n\t"
+ " move.4 0x8(%1), 0x58(%0) \n\t"
+ " move.4 0xc(%1), 0x5c(%0) \n\t"
+ " \n\t"
+ "; kick off hw for 2nd input \n\t"
+ " move.4 0x40(%0), %2 \n\t"
+ " \n\t"
+ "; update out asap \n\t"
+ " move.4 d15, 16(%1)++ \n\t"
+ " \n\t"
+ "; go back to loop \n\t"
+ " jmpt 1b \n\t"
+ " \n\t"
+ "; wait for last output \n\t"
+ " 5: btst 0x04(%0), #0 \n\t"
+ " jmpne.f -4 \n\t"
+ " \n\t"
+ "; read last output \n\t"
+ " move.4 0x0(%1), 0x50(%0) \n\t"
+ " move.4 0x4(%1), 0x54(%0) \n\t"
+ " move.4 0x8(%1), 0x58(%0) \n\t"
+ " move.4 0xc(%1), 0x5c(%0) \n\t"
+ " \n\t"
+ "; copy out iv \n\t"
+ " move.4 0x0(%3), 0x50(%0) \n\t"
+ " move.4 0x4(%3), 0x54(%0) \n\t"
+ " move.4 0x8(%3), 0x58(%0) \n\t"
+ " move.4 0xc(%3), 0x5c(%0) \n\t"
+ " \n\t"
+ :
+ : "a" (SEC_BASE), "a" (out), "a" (in), "a" (iv), "d" (n)
+ : "d15", "cc"
+ );
+}
+
+#else
+
+static void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ aes_hw_set_iv(iv);
+ while (likely(n)) {
+ aes_hw_cipher(out, in);
+ out += AES_BLOCK_SIZE;
+ in += AES_BLOCK_SIZE;
+ n -= AES_BLOCK_SIZE;
+ }
+ SEC_COPY_4W(iv, out - AES_BLOCK_SIZE);
+}
+
+#endif
+
+static void __ocm_text cbc_aes_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ while (likely(n)) {
+ aes_hw_set_iv(iv);
+ SEC_COPY_4W(iv, in);
+ aes_hw_cipher(out, in);
+ out += AES_BLOCK_SIZE;
+ in += AES_BLOCK_SIZE;
+ n -= AES_BLOCK_SIZE;
+ }
+}
+
+static int __ocm_text cbc_aes_crypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes, u32 extra_flags)
+{
+ struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
+ int ret;
+
+ struct blkcipher_walk walk;
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ ret = blkcipher_walk_virt(desc, &walk);
+ if (unlikely(ret)) {
+ return ret;
+ }
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
+ aes_hw_set_key(uctx->key, uctx->key_len);
+
+ while (likely((nbytes = walk.nbytes))) {
+ /* only use complete blocks */
+ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
+ if (likely(n)) {
+ u8 *out = walk.dst.virt.addr;
+ u8 *in = walk.src.virt.addr;
+
+ if (extra_flags & SEC_DIR_ENCRYPT) {
+ cbc_aes_encrypt_loop(out, in, walk.iv, n);
+ } else {
+ cbc_aes_decrypt_loop(out, in, walk.iv, n);
+ }
+ }
+
+ nbytes &= AES_BLOCK_SIZE - 1;
+ ret = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+ hw_crypto_unlock();
+
+ return ret;
+}
+
+static int __ocm_text cbc_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT | SEC_CBC_SET);
+}
+
+static int __ocm_text cbc_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT | SEC_CBC_SET);
+}
+
+static struct crypto_alg cbc_aes_alg = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_aes_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = cbc_aes_encrypt,
+ .decrypt = cbc_aes_decrypt,
+ }
+ }
+};
+
+static int __init aes_init(void)
+{
+ int ret;
+
+ hw_crypto_init();
+
+ ret = crypto_register_alg(&aes_alg);
+ if (ret)
+ goto aes_err;
+
+ ret = crypto_register_alg(&ecb_aes_alg);
+ if (ret)
+ goto ecb_aes_err;
+
+ ret = crypto_register_alg(&cbc_aes_alg);
+ if (ret)
+ goto cbc_aes_err;
+
+out:
+ return ret;
+
+cbc_aes_err:
+ crypto_unregister_alg(&ecb_aes_alg);
+ecb_aes_err:
+ crypto_unregister_alg(&aes_alg);
+aes_err:
+ goto out;
+}
+
+static void __exit aes_fini(void)
+{
+ crypto_unregister_alg(&cbc_aes_alg);
+ crypto_unregister_alg(&ecb_aes_alg);
+ crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_ALIAS("aes");
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/ubicom32/crypto/crypto_des.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/crypto/crypto_des.h
+ * Function for checking keys for the DES and Triple DES Encryption
+ * algorithms.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef __CRYPTO_DES_H__
+#define __CRYPTO_DES_H__
+
+extern int crypto_des_check_key(const u8*, unsigned int, u32*);
+
+#endif /* __CRYPTO_DES_H__ */
--- /dev/null
+++ b/arch/ubicom32/crypto/crypto_ubicom32.c
@@ -0,0 +1,50 @@
+/*
+ * arch/ubicom32/crypto/crypto_ubicom32.c
+ * Generic code to support ubicom32 hardware crypto accelerator
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include "crypto_ubicom32.h"
+
+spinlock_t crypto_ubicom32_lock;
+bool crypto_ubicom32_inited = false;
+volatile bool crypto_ubicom32_on = false;
+volatile unsigned long crypto_ubicom32_last_use;
+
+struct timer_list crypto_ubicom32_ps_timer;
+void crypto_ubicom32_ps_check(unsigned long data)
+{
+ unsigned long idle_time = msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS);
+
+ BUG_ON(!crypto_ubicom32_on);
+
+ if (((jiffies - crypto_ubicom32_last_use) > idle_time) && spin_trylock_bh(&crypto_ubicom32_lock)) {
+ hw_crypto_turn_off();
+ spin_unlock_bh(&crypto_ubicom32_lock);
+ return;
+ }
+
+ /* keep monitoring */
+ hw_crypto_ps_start();
+}
--- /dev/null
+++ b/arch/ubicom32/crypto/crypto_ubicom32.h
@@ -0,0 +1,346 @@
+/*
+ * arch/ubicom32/crypto/crypto_ubicom32.h
+ * Support for Ubicom32 cryptographic instructions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _CRYPTO_ARCH_UBICOM32_CRYPT_H
+#define _CRYPTO_ARCH_UBICOM32_CRYPT_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/ip5000.h>
+
+#define CRYPTO_UBICOM32_LOOP_ASM 1
+#define CRYPTO_UBICOM32_ALIGNMENT 4
+#define SEC_ALIGNED(p) (((u32)p & 3) == 0)
+
+#define SEC_BASE SECURITY_BASE
+#define SEC_KEY_OFFSET SECURITY_KEY_VALUE(0)
+#define SEC_INPUT_OFFSET SECURITY_KEY_IN(0)
+#define SEC_OUTPUT_OFFSET SECURITY_KEY_OUT(0)
+#define SEC_HASH_OFFSET SECURITY_KEY_HASH(0)
+
+#define SEC_KEY_128_BITS SECURITY_CTRL_KEY_SIZE(0)
+#define SEC_KEY_192_BITS SECURITY_CTRL_KEY_SIZE(1)
+#define SEC_KEY_256_BITS SECURITY_CTRL_KEY_SIZE(2)
+
+#define SEC_HASH_NONE SECURITY_CTRL_HASH_ALG_NONE
+#define SEC_HASH_MD5 SECURITY_CTRL_HASH_ALG_MD5
+#define SEC_HASH_SHA1 SECURITY_CTRL_HASH_ALG_SHA1
+
+#define SEC_CBC_SET SECURITY_CTRL_CBC
+#define SEC_CBC_NONE 0
+
+#define SEC_ALG_AES SECURITY_CTRL_CIPHER_ALG_AES
+#define SEC_ALG_NONE SECURITY_CTRL_CIPHER_ALG_NONE
+#define SEC_ALG_DES SECURITY_CTRL_CIPHER_ALG_DES
+#define SEC_ALG_3DES SECURITY_CTRL_CIPHER_ALG_3DES
+
+#define SEC_DIR_ENCRYPT SECURITY_CTRL_ENCIPHER
+#define SEC_DIR_DECRYPT 0
+
+#define CRYPTO_UBICOM32_PRIORITY 300
+#define CRYPTO_UBICOM32_COMPOSITE_PRIORITY 400
+
+#define HW_CRYPTO_PS_MAX_IDLE_MS 100 /* idle time (ms) before shuting down sm */
+
+extern spinlock_t crypto_ubicom32_lock;
+extern bool crypto_ubicom32_inited;
+extern volatile bool crypto_ubicom32_on;
+extern volatile unsigned long crypto_ubicom32_last_use;
+extern struct timer_list crypto_ubicom32_ps_timer;
+extern void crypto_ubicom32_ps_check(unsigned long data);
+
+#define SEC_COPY_2W(t, s) \
+ asm volatile ( \
+ " move.4 0(%0), 0(%1) \n\t" \
+ " move.4 4(%0), 4(%1) \n\t" \
+ \
+ : \
+ : "a" (t), "a" (s) \
+ )
+
+#define SEC_COPY_4W(t, s) \
+ asm volatile ( \
+ " move.4 0(%0), 0(%1) \n\t" \
+ " move.4 4(%0), 4(%1) \n\t" \
+ " move.4 8(%0), 8(%1) \n\t" \
+ " move.4 12(%0), 12(%1) \n\t" \
+ : \
+ : "a" (t), "a" (s) \
+ )
+
+#define SEC_COPY_5W(t, s) \
+ asm volatile ( \
+ " move.4 0(%0), 0(%1) \n\t" \
+ " move.4 4(%0), 4(%1) \n\t" \
+ " move.4 8(%0), 8(%1) \n\t" \
+ " move.4 12(%0), 12(%1) \n\t" \
+ " move.4 16(%0), 16(%1) \n\t" \
+ : \
+ : "a" (t), "a" (s) \
+ )
+
+#define SEC_SET_KEY_2W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x10(%0), 0(%1) \n\t" \
+ " move.4 0x14(%0), 4(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_SET_KEY_4W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x10(%0), 0(%1) \n\t" \
+ " move.4 0x14(%0), 4(%1) \n\t" \
+ " move.4 0x18(%0), 8(%1) \n\t" \
+ " move.4 0x1c(%0), 12(%1) \n\t" \
+ : \
+ : "a"(SECURITY_BASE), "a"(x) \
+ )
+
+#define SEC_SET_KEY_6W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x10(%0), 0(%1) \n\t" \
+ " move.4 0x14(%0), 4(%1) \n\t" \
+ " move.4 0x18(%0), 8(%1) \n\t" \
+ " move.4 0x1c(%0), 12(%1) \n\t" \
+ " move.4 0x20(%0), 16(%1) \n\t" \
+ " move.4 0x24(%0), 20(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_SET_KEY_8W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x10(%0), 0(%1) \n\t" \
+ " move.4 0x14(%0), 4(%1) \n\t" \
+ " move.4 0x18(%0), 8(%1) \n\t" \
+ " move.4 0x1c(%0), 12(%1) \n\t" \
+ " move.4 0x20(%0), 16(%1) \n\t" \
+ " move.4 0x24(%0), 20(%1) \n\t" \
+ " move.4 0x28(%0), 24(%1) \n\t" \
+ " move.4 0x2c(%0), 28(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_SET_KEY_64(k) SEC_SET_KEY_2W(k)
+#define SEC_SET_KEY_128(k) SEC_SET_KEY_4W(k)
+#define SEC_SET_KEY_192(k) SEC_SET_KEY_6W(k)
+#define SEC_SET_KEY_256(k) SEC_SET_KEY_8W(k)
+
+#define DES_SET_KEY(x) SEC_SET_KEY_64(x)
+#define DES3_SET_KEY(x) SEC_SET_KEY_192(x)
+
+#define SEC_SET_INPUT_2W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x30(%0), 0(%1) \n\t" \
+ " move.4 0x34(%0), 4(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_GET_OUTPUT_2W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0(%1), 0x50(%0) \n\t" \
+ " move.4 4(%1), 0x54(%0) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_SET_INPUT_4W(x) \
+ asm volatile ( \
+ " ; write key to Security Keyblock \n\t" \
+ " move.4 0x30(%0), 0(%1) \n\t" \
+ " move.4 0x34(%0), 4(%1) \n\t" \
+ " move.4 0x38(%0), 8(%1) \n\t" \
+ " move.4 0x3c(%0), 12(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_GET_OUTPUT_4W(x) \
+ asm volatile ( \
+ " ; read output from Security Keyblock \n\t" \
+ " move.4 0(%1), 0x50(%0) \n\t" \
+ " move.4 4(%1), 0x54(%0) \n\t" \
+ " move.4 8(%1), 0x58(%0) \n\t" \
+ " move.4 12(%1), 0x5c(%0) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_SET_IV_4W(x) \
+ asm volatile ( \
+ " ; write IV to Security Keyblock \n\t" \
+ " move.4 0x50(%0), 0(%1) \n\t" \
+ " move.4 0x54(%0), 4(%1) \n\t" \
+ " move.4 0x58(%0), 8(%1) \n\t" \
+ " move.4 0x5c(%0), 12(%1) \n\t" \
+ : \
+ : "a" (SECURITY_BASE), "a" (x) \
+ )
+
+#define SEC_PIPE_FLUSH() asm volatile ( " pipe_flush 0 \n\t" )
+
+static inline void hw_crypto_set_ctrl(uint32_t c)
+{
+ asm volatile (
+ " move.4 0(%0), %1 \n\t"
+ :
+ : "a" (SECURITY_BASE + SECURITY_CTRL), "d" (c)
+ );
+}
+
+static inline void hw_crypto_ps_start(void)
+{
+ crypto_ubicom32_ps_timer.expires = jiffies + msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS >> 1);
+ add_timer(&crypto_ubicom32_ps_timer);
+}
+
+static inline void hw_crypto_turn_on(void)
+{
+ asm volatile (
+ " moveai A4, %0 \n\t"
+ " bset 0x0(A4), 0x0(A4), %1 \n\t"
+ " cycles 11 \n\t"
+ :
+ : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
+ : "a4", "cc"
+ );
+ crypto_ubicom32_on = true;
+}
+
+static inline void hw_crypto_turn_off(void)
+{
+ asm volatile (
+ " moveai A4, %0 \n\t"
+ " bclr 0x0(A4), 0x0(A4), %1 \n\t"
+ :
+ : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO)
+ : "a4", "cc"
+ );
+ crypto_ubicom32_on = false;
+}
+
+/*
+ * hw_crypto_check
+ * Most probably hw crypto is called in clusters and it makes no sense to turn it off
+ * and on and waster 13 cycles every time.
+ */
+static inline void hw_crypto_check(void)
+{
+ if (likely(crypto_ubicom32_on)) {
+ return;
+ }
+ crypto_ubicom32_last_use = jiffies;
+ hw_crypto_turn_on();
+ hw_crypto_ps_start();
+}
+
+/*
+ * hw_crypto_ps_init
+ * Init power save timer
+ */
+static inline void hw_crypto_ps_init(void)
+{
+ init_timer_deferrable(&crypto_ubicom32_ps_timer);
+ crypto_ubicom32_ps_timer.function = crypto_ubicom32_ps_check;
+ crypto_ubicom32_ps_timer.data = 0;
+}
+
+/*
+ * hw_crypto_init()
+ * Initialize OCP security module lock and disables its clock.
+ */
+static inline void hw_crypto_init(void)
+{
+ if (!crypto_ubicom32_inited) {
+ crypto_ubicom32_inited = true;
+ spin_lock_init(&crypto_ubicom32_lock);
+ hw_crypto_ps_init();
+ hw_crypto_turn_off();
+ }
+}
+
+/*
+ * hw_crypto_lock()
+ * Locks the OCP security module and enables its clock.
+ */
+static inline void hw_crypto_lock(void)
+{
+ spin_lock_bh(&crypto_ubicom32_lock);
+}
+
+/*
+ * hw_crypto_unlock()
+ * Unlocks the OCP security module and disables its clock.
+ */
+static inline void hw_crypto_unlock(void)
+{
+ crypto_ubicom32_last_use = jiffies;
+ spin_unlock_bh(&crypto_ubicom32_lock);
+}
+
+#define CONFIG_CRYPTO_UBICOM32_DEBUG 1
+
+#ifdef CONFIG_CRYPTO_UBICOM32_DEBUG
+static inline void hex_dump(void *buf, int b_size, const char *msg)
+{
+ u8 *b = (u8 *)buf;
+ int i;
+ if (msg) {
+ printk("%s:\t", msg);
+ }
+
+ for (i=0; i < b_size; i++) {
+ printk("%02x ", b[i]);
+ if ((i & 3) == 3) {
+ printk(" ");
+ }
+ if ((i & 31) == 31) {
+ printk("\n");
+ }
+ }
+ printk("\n");
+}
+#define UBICOM32_SEC_DUMP(a, b, c) hex_dump(a, b, c)
+#else
+#define UBICOM32_SEC_DUMP(a, b, c)
+#endif
+
+#endif /* _CRYPTO_ARCH_UBICOM32_CRYPT_H */
--- /dev/null
+++ b/arch/ubicom32/crypto/des_check_key.c
@@ -0,0 +1,148 @@
+/*
+ * arch/ubicom32/crypto/des_check_key.c
+ * Ubicom32 architecture function for checking keys for the DES and
+ * Tripple DES Encryption algorithms.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * Originally released as descore by Dana L. How <how@isl.stanford.edu>.
+ * Modified by Raimar Falke <rf13@inf.tu-dresden.de> for the Linux-Kernel.
+ * Derived from Cryptoapi and Nettle implementations, adapted for in-place
+ * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL.
+ *
+ * s390 Version:
+ * Copyright IBM Corp. 2003
+ * Author(s): Thomas Spatzier
+ * Jan Glauber (jan.glauber@de.ibm.com)
+ *
+ * Derived from "crypto/des.c"
+ * Copyright (c) 1992 Dana L. How.
+ * Copyright (c) Raimar Falke <rf13@inf.tu-dresden.de>
+ * Copyright (c) Gisle Sflensminde <gisle@ii.uib.no>
+ * Copyright (C) 2001 Niels Mvller.
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/crypto.h>
+#include "crypto_des.h"
+
+#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o))
+
+static const u8 parity[] = {
+ 8,1,0,8,0,8,8,0,0,8,8,0,8,0,2,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,3,
+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
+ 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,
+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
+ 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,
+ 4,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,5,0,8,0,8,8,0,0,8,8,0,8,0,6,8,
+};
+
+/*
+ * RFC2451: Weak key checks SHOULD be performed.
+ */
+int
+crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags)
+{
+ u32 n, w;
+
+ n = parity[key[0]]; n <<= 4;
+ n |= parity[key[1]]; n <<= 4;
+ n |= parity[key[2]]; n <<= 4;
+ n |= parity[key[3]]; n <<= 4;
+ n |= parity[key[4]]; n <<= 4;
+ n |= parity[key[5]]; n <<= 4;
+ n |= parity[key[6]]; n <<= 4;
+ n |= parity[key[7]];
+ w = 0x88888888L;
+
+ if ((*flags & CRYPTO_TFM_REQ_WEAK_KEY)
+ && !((n - (w >> 3)) & w)) { /* 1 in 10^10 keys passes this test */
+ if (n < 0x41415151) {
+ if (n < 0x31312121) {
+ if (n < 0x14141515) {
+ /* 01 01 01 01 01 01 01 01 */
+ if (n == 0x11111111) goto weak;
+ /* 01 1F 01 1F 01 0E 01 0E */
+ if (n == 0x13131212) goto weak;
+ } else {
+ /* 01 E0 01 E0 01 F1 01 F1 */
+ if (n == 0x14141515) goto weak;
+ /* 01 FE 01 FE 01 FE 01 FE */
+ if (n == 0x16161616) goto weak;
+ }
+ } else {
+ if (n < 0x34342525) {
+ /* 1F 01 1F 01 0E 01 0E 01 */
+ if (n == 0x31312121) goto weak;
+ /* 1F 1F 1F 1F 0E 0E 0E 0E (?) */
+ if (n == 0x33332222) goto weak;
+ } else {
+ /* 1F E0 1F E0 0E F1 0E F1 */
+ if (n == 0x34342525) goto weak;
+ /* 1F FE 1F FE 0E FE 0E FE */
+ if (n == 0x36362626) goto weak;
+ }
+ }
+ } else {
+ if (n < 0x61616161) {
+ if (n < 0x44445555) {
+ /* E0 01 E0 01 F1 01 F1 01 */
+ if (n == 0x41415151) goto weak;
+ /* E0 1F E0 1F F1 0E F1 0E */
+ if (n == 0x43435252) goto weak;
+ } else {
+ /* E0 E0 E0 E0 F1 F1 F1 F1 (?) */
+ if (n == 0x44445555) goto weak;
+ /* E0 FE E0 FE F1 FE F1 FE */
+ if (n == 0x46465656) goto weak;
+ }
+ } else {
+ if (n < 0x64646565) {
+ /* FE 01 FE 01 FE 01 FE 01 */
+ if (n == 0x61616161) goto weak;
+ /* FE 1F FE 1F FE 0E FE 0E */
+ if (n == 0x63636262) goto weak;
+ } else {
+ /* FE E0 FE E0 FE F1 FE F1 */
+ if (n == 0x64646565) goto weak;
+ /* FE FE FE FE FE FE FE FE */
+ if (n == 0x66666666) goto weak;
+ }
+ }
+ }
+ }
+ return 0;
+weak:
+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(crypto_des_check_key);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Key Check function for DES & DES3 Cipher Algorithms");
--- /dev/null
+++ b/arch/ubicom32/crypto/des_ubicom32.c
@@ -0,0 +1,761 @@
+/*
+ * arch/ubicom32/crypto/des_ubicom32.c
+ * Ubicom32 implementation of the DES Cipher Algorithm.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <crypto/algapi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "crypto_ubicom32.h"
+extern int crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags);
+
+#define DES_BLOCK_SIZE 8
+#define DES_KEY_SIZE 8
+
+#define DES3_192_KEY_SIZE (3 * DES_KEY_SIZE)
+#define DES3_192_BLOCK_SIZE DES_BLOCK_SIZE
+
+#define DES3_SUB_KEY(key, i) (((u8 *)key) + (i * DES_KEY_SIZE))
+
+enum des_ops {
+ DES_ENCRYPT,
+ DES_DECRYPT,
+
+ DES3_EDE_ENCRYPT,
+ DES3_EDE_DECRYPT,
+
+#ifdef DES3_EEE
+ DES3_EEE_ENCRYPT,
+ DES3_EEE_DECRYPT,
+#endif
+};
+
+struct ubicom32_des_ctx {
+ u8 key[3 * DES_KEY_SIZE];
+ u32 ctrl;
+ int key_len;
+};
+
+static inline void des_hw_set_key(const u8 *key, u8 key_len)
+{
+ /*
+ * HW 3DES is not tested yet, use DES just as ipOS
+ */
+ DES_SET_KEY(key);
+}
+
+static inline void des_hw_cipher(u8 *out, const u8 *in)
+{
+ SEC_SET_INPUT_2W(in);
+
+ asm volatile (
+ " ; start DES by writing 0x38(SECURITY_BASE) \n\t"
+ " move.4 0x38(%0), #0x01 \n\t"
+ " pipe_flush 0 \n\t"
+ " \n\t"
+ " ; wait for the module to calculate the output \n\t"
+ " btst 0x04(%0), #0 \n\t"
+ " jmpne.f .-4 \n\t"
+ :
+ : "a" (SEC_BASE)
+ : "cc"
+ );
+
+ SEC_GET_OUTPUT_2W(out);
+}
+
+
+static void inline des3_hw_ede_encrypt(u8 *keys, u8 *out, const u8 *in)
+{
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
+ des_hw_cipher(out, in);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
+ des_hw_cipher(out, out);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
+ des_hw_cipher(out, out);
+}
+
+static void inline des3_hw_ede_decrypt(u8 *keys, u8 *out, const u8 *in)
+{
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE);
+ des_hw_cipher(out, in);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE);
+ des_hw_cipher(out, out);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE);
+ des_hw_cipher(out, out);
+}
+
+#ifdef DES3_EEE
+static void inline des3_hw_eee_encrypt(u8 *keys, u8 *out, const u8 *in)
+{
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
+ des_hw_cipher(out, in);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
+ des_hw_cipher(out, out);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
+ des_hw_cipher(out, out);
+}
+
+static void inline des3_hw_eee_decrypt(u8 *keys, u8 *out, const u8 *in)
+{
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 2), 2);
+ des_hw_cipher(out, in);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 1), 2);
+ des_hw_cipher(out, out);
+
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(DES3_SUB_KEY(keys, 0), 2);
+ des_hw_cipher(out, out);
+}
+#endif
+
+static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
+ u32 *flags = &tfm->crt_flags;
+ int ret;
+
+ /* test if key is valid (not a weak key) */
+ ret = crypto_des_check_key(key, keylen, flags);
+ if (ret == 0) {
+ memcpy(dctx->key, key, keylen);
+ dctx->key_len = keylen;
+ //dctx->ctrl = (keylen == DES_KEY_SIZE) ? SEC_ALG_DES : SEC_ALG_3DES
+ /* 2DES and 3DES are both implemented with DES hw function */
+ dctx->ctrl = SEC_ALG_DES;
+ }
+ return ret;
+}
+
+static inline void des_cipher_1b(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags)
+{
+ const struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
+
+ hw_crypto_lock();
+ hw_crypto_check();
+ hw_crypto_set_ctrl(uctx->ctrl | extra_flags);
+
+ des_hw_set_key(uctx->key, uctx->key_len);
+ des_hw_cipher(out, in);
+
+ hw_crypto_unlock();
+}
+
+static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ des_cipher_1b(tfm, out, in, SEC_DIR_ENCRYPT);
+}
+
+static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ des_cipher_1b(tfm, out, in, SEC_DIR_DECRYPT);
+}
+
+static struct crypto_alg des_alg = {
+ .cra_name = "des",
+ .cra_driver_name = "des-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(des_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = DES_KEY_SIZE,
+ .cia_max_keysize = DES_KEY_SIZE,
+ .cia_setkey = des_setkey,
+ .cia_encrypt = des_encrypt,
+ .cia_decrypt = des_decrypt,
+ }
+ }
+};
+
+static void ecb_des_ciper_loop(u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ des_hw_cipher(out, in);
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void ecb_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ des3_hw_ede_encrypt(keys, out, in);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void ecb_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ des3_hw_ede_decrypt(keys, out, in);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+#ifdef DES3_EEE
+static void ecb_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ des3_hw_eee_encrypt(keys, out, in);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void ecb_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n)
+{
+ while (likely(n)) {
+ des3_hw_eee_decrypt(keys, out, in);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+#endif
+
+static inline void ecb_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, unsigned int n)
+{
+ switch (op) {
+ case DES_ENCRYPT:
+ case DES_DECRYPT:
+ /* set the right algo, direction and key once */
+ hw_crypto_set_ctrl(SEC_ALG_DES | (op == DES_ENCRYPT ? SEC_DIR_ENCRYPT : 0));
+ des_hw_set_key(uctx->key, uctx->key_len);
+ ecb_des_ciper_loop(out, in, n);
+ break;
+
+ case DES3_EDE_ENCRYPT:
+ ecb_des3_ede_encrypt_loop(uctx->key, out, in, n);
+ break;
+
+ case DES3_EDE_DECRYPT:
+ ecb_des3_ede_decrypt_loop(uctx->key, out, in, n);
+ break;
+
+#ifdef DES3_EEE
+ case DES3_EEE_ENCRYPT:
+ ecb_des3_eee_encrypt_loop(uctx->key, out, in, n);
+ break;
+
+ case DES3_EEE_DECRYPT:
+ ecb_des3_eee_decrypt_loop(uctx->key, out, in, n);
+ break;
+#endif
+ }
+}
+
+static inline void des_xor_2w(u32 *data, u32 *iv)
+{
+ data[0] ^= iv[0];
+ data[1] ^= iv[1];
+}
+
+static void cbc_des_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ while (likely(n)) {
+ des_xor_2w((u32 *)in, (u32 *)iv);
+ des_hw_cipher(out, in);
+ SEC_COPY_2W(iv, out);
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void cbc_des_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ u8 next_iv[DES_BLOCK_SIZE];
+ while (likely(n)) {
+ SEC_COPY_2W(next_iv, in);
+ des_hw_cipher(out, in);
+ des_xor_2w((u32 *)out, (u32 *)iv);
+ SEC_COPY_2W(iv, next_iv);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void cbc_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ while (likely(n)) {
+ des_xor_2w((u32 *)in, (u32 *)iv);
+ des3_hw_ede_encrypt(keys, out, in);
+ SEC_COPY_2W(iv, out);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void cbc_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ u8 next_iv[DES_BLOCK_SIZE];
+ while (likely(n)) {
+ SEC_COPY_2W(next_iv, in);
+ des3_hw_ede_decrypt(keys, out, in);
+ des_xor_2w((u32 *)out, (u32 *)iv);
+ SEC_COPY_2W(iv, next_iv);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+#ifdef DES3_EEE
+static void cbc_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ while (likely(n)) {
+ des_xor_2w((u32 *)in, (u32 *)iv);
+ des3_hw_eee_encrypt(keys, out, in);
+ SEC_COPY_2W(iv, out);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+
+static void cbc_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ u8 next_iv[DES_BLOCK_SIZE];
+ while (likely(n)) {
+ SEC_COPY_2W(next_iv, in);
+ des3_hw_eee_decrypt(keys, out, in);
+ des_xor_2w((u32 *)out, (u32 *)iv);
+ SEC_COPY_2W(iv, next_iv);
+
+ out += DES_BLOCK_SIZE;
+ in += DES_BLOCK_SIZE;
+ n -= DES_BLOCK_SIZE;
+ }
+}
+#endif
+
+static inline void cbc_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, u8 *iv, unsigned int n)
+{
+ switch (op) {
+ case DES_ENCRYPT:
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT);
+ des_hw_set_key(uctx->key, uctx->key_len);
+ cbc_des_encrypt_loop(out, in, iv, n);
+ break;
+
+ case DES_DECRYPT:
+ /* set the right algo, direction and key once */
+ hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT);
+ des_hw_set_key(uctx->key, uctx->key_len);
+ cbc_des_decrypt_loop(out, in, iv, n);
+ break;
+
+ case DES3_EDE_ENCRYPT:
+ cbc_des3_ede_encrypt_loop(uctx->key, out, in, iv, n);
+ break;
+
+ case DES3_EDE_DECRYPT:
+ cbc_des3_ede_decrypt_loop(uctx->key, out, in, iv, n);
+ break;
+
+#ifdef DES3_EEE
+ case DES3_EEE_ENCRYPT:
+ cbc_des3_eee_encrypt_loop(uctx->key, out, in, iv, n);
+ break;
+
+ case DES3_EEE_DECRYPT:
+ cbc_des3_eee_decrypt_loop(uctx->key, out, in, iv, n);
+ break;
+#endif
+ }
+}
+
+static int des_cipher(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes, u32 extra_flags, enum des_ops op)
+{
+ struct ubicom32_des_ctx *uctx = crypto_blkcipher_ctx(desc->tfm);
+ int ret;
+
+ struct blkcipher_walk walk;
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ ret = blkcipher_walk_virt(desc, &walk);
+ if (ret) {
+ return ret;
+ }
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ while ((nbytes = walk.nbytes)) {
+ /* only use complete blocks */
+ unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
+ u8 *out = walk.dst.virt.addr;
+ u8 *in = walk.src.virt.addr;
+
+ /* finish n/16 blocks */
+ if (extra_flags & SEC_CBC_SET) {
+ cbc_des_cipher_n(uctx, op, out, in, walk.iv, n);
+ } else {
+ ecb_des_cipher_n(uctx, op, out, in, n);
+ }
+
+ nbytes &= DES_BLOCK_SIZE - 1;
+ ret = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ hw_crypto_unlock();
+ return ret;
+}
+
+static int ecb_des_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_ENCRYPT);
+}
+
+static int ecb_des_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_DECRYPT);
+}
+
+static struct crypto_alg ecb_des_alg = {
+ .cra_name = "ecb(des)",
+ .cra_driver_name = "ecb-des-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .setkey = des_setkey,
+ .encrypt = ecb_des_encrypt,
+ .decrypt = ecb_des_decrypt,
+ }
+ }
+};
+
+static int cbc_des_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_ENCRYPT);
+}
+
+static int cbc_des_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_DECRYPT);
+}
+
+static struct crypto_alg cbc_des_alg = {
+ .cra_name = "cbc(des)",
+ .cra_driver_name = "cbc-des-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = des_setkey,
+ .encrypt = cbc_des_encrypt,
+ .decrypt = cbc_des_decrypt,
+ }
+ }
+};
+
+/*
+ * RFC2451:
+ *
+ * For DES-EDE3, there is no known need to reject weak or
+ * complementation keys. Any weakness is obviated by the use of
+ * multiple keys.
+ *
+ * However, if the first two or last two independent 64-bit keys are
+ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
+ * same as DES. Implementers MUST reject keys that exhibit this
+ * property.
+ *
+ */
+static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ int i, ret;
+ struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm);
+ const u8 *temp_key = key;
+ u32 *flags = &tfm->crt_flags;
+
+ if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
+ memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
+ DES_KEY_SIZE))) {
+
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+ return -EINVAL;
+ }
+ for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
+ ret = crypto_des_check_key(temp_key, DES_KEY_SIZE, flags);
+ if (ret < 0)
+ return ret;
+ }
+ memcpy(dctx->key, key, keylen);
+ dctx->ctrl = SEC_ALG_DES; //hw 3DES not working yet
+ dctx->key_len = keylen;
+ return 0;
+}
+
+static void des3_192_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ des3_hw_ede_encrypt(uctx->key, dst, src);
+
+ hw_crypto_unlock();
+}
+
+static void des3_192_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm);
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ des3_hw_ede_decrypt(uctx->key, dst, src);
+
+ hw_crypto_unlock();
+}
+
+static struct crypto_alg des3_192_alg = {
+ .cra_name = "des3_ede",
+ .cra_driver_name = "des3_ede-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = DES3_192_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(des3_192_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = DES3_192_KEY_SIZE,
+ .cia_max_keysize = DES3_192_KEY_SIZE,
+ .cia_setkey = des3_192_setkey,
+ .cia_encrypt = des3_192_encrypt,
+ .cia_decrypt = des3_192_decrypt,
+ }
+ }
+};
+
+static int ecb_des3_192_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_ENCRYPT);
+}
+
+static int ecb_des3_192_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_DECRYPT);
+}
+
+static struct crypto_alg ecb_des3_192_alg = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3_ede-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES3_192_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(
+ ecb_des3_192_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES3_192_KEY_SIZE,
+ .max_keysize = DES3_192_KEY_SIZE,
+ .setkey = des3_192_setkey,
+ .encrypt = ecb_des3_192_encrypt,
+ .decrypt = ecb_des3_192_decrypt,
+ }
+ }
+};
+
+static int cbc_des3_192_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_ENCRYPT);
+}
+
+static int cbc_des3_192_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_DECRYPT);
+}
+
+static struct crypto_alg cbc_des3_192_alg = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3_ede-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES3_192_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_des_ctx),
+ .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(
+ cbc_des3_192_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES3_192_KEY_SIZE,
+ .max_keysize = DES3_192_KEY_SIZE,
+ .ivsize = DES3_192_BLOCK_SIZE,
+ .setkey = des3_192_setkey,
+ .encrypt = cbc_des3_192_encrypt,
+ .decrypt = cbc_des3_192_decrypt,
+ }
+ }
+};
+
+static int init(void)
+{
+ int ret = 0;
+
+ hw_crypto_init();
+
+ ret = crypto_register_alg(&des_alg);
+ if (ret)
+ goto des_err;
+ ret = crypto_register_alg(&ecb_des_alg);
+ if (ret)
+ goto ecb_des_err;
+ ret = crypto_register_alg(&cbc_des_alg);
+ if (ret)
+ goto cbc_des_err;
+
+ ret = crypto_register_alg(&des3_192_alg);
+ if (ret)
+ goto des3_192_err;
+ ret = crypto_register_alg(&ecb_des3_192_alg);
+ if (ret)
+ goto ecb_des3_192_err;
+ ret = crypto_register_alg(&cbc_des3_192_alg);
+ if (ret)
+ goto cbc_des3_192_err;
+
+out:
+ return ret;
+
+cbc_des3_192_err:
+ crypto_unregister_alg(&ecb_des3_192_alg);
+ecb_des3_192_err:
+ crypto_unregister_alg(&des3_192_alg);
+des3_192_err:
+ crypto_unregister_alg(&cbc_des_alg);
+cbc_des_err:
+ crypto_unregister_alg(&ecb_des_alg);
+ecb_des_err:
+ crypto_unregister_alg(&des_alg);
+des_err:
+ goto out;
+}
+
+static void __exit fini(void)
+{
+ crypto_unregister_alg(&cbc_des3_192_alg);
+ crypto_unregister_alg(&ecb_des3_192_alg);
+ crypto_unregister_alg(&des3_192_alg);
+ crypto_unregister_alg(&cbc_des_alg);
+ crypto_unregister_alg(&ecb_des_alg);
+ crypto_unregister_alg(&des_alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_ALIAS("des");
+MODULE_ALIAS("des3_ede");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
--- /dev/null
+++ b/arch/ubicom32/crypto/Makefile
@@ -0,0 +1,36 @@
+#
+# arch/ubicom32/crypto/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+obj-$(CONFIG_CRYPTO_UBICOM32) += crypto_ubicom32.o
+obj-$(CONFIG_CRYPTO_AES_UBICOM32) += aes_ubicom32.o
+obj-$(CONFIG_CRYPTO_DES_UBICOM32) += des.o
+obj-$(CONFIG_CRYPTO_MD5_UBICOM32) += md5.o
+obj-$(CONFIG_CRYPTO_SHA1_UBICOM32) += sha1.o
+
+des-y := des_ubicom32.o des_check_key.o
+md5-y := md5_ubicom32.o md5_ubicom32_asm.o
+sha1-y := sha1_ubicom32.o
--- /dev/null
+++ b/arch/ubicom32/crypto/md5_ubicom32_asm.S
@@ -0,0 +1,235 @@
+/*
+ * arch/ubicom32/crypto/md5_ubicom32_asm.S
+ * MD5 (Message Digest 5) support for Ubicom32 v3 architecture
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#define __ASM__
+#include <asm/ip5000.h>
+
+#ifndef RP
+#define RP A5
+#endif
+
+;*****************************************************************************************
+; The function prototypes
+;*****************************************************************************************
+; void md5_ip5k_init(void)
+; void md5_ip5k_transform(u32_t *data_input)
+; void md5_get_digest(u32_t *digest)
+
+;*****************************************************************************************
+; Inputs
+;*****************************************************************************************;
+; data_input is the pointer to the block of data over which the digest will be calculated.
+; It should be word aligned.
+;
+; digest is the pointer to the block of data into which the digest (the output) will be written.
+; It should be word aligned.
+;
+
+;*****************************************************************************************
+; Outputs
+;*****************************************************************************************
+; None
+
+;*****************************************************************************************
+; An: Address Registers
+;*****************************************************************************************
+#define an_digest A3
+#define an_data_input A3
+#define an_security_block A4
+
+;*****************************************************************************************
+; Hash Constants
+;*****************************************************************************************
+#define HASH_MD5_IN0 0x01234567
+#define HASH_MD5_IN1 0x89abcdef
+#define HASH_MD5_IN2 0xfedcba98
+#define HASH_MD5_IN3 0x76543210
+
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_MD5 ((1 << 4) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
+
+;*****************************************************************************************
+; Hash related defines
+;*****************************************************************************************
+#define hash_control 0x00(an_security_block)
+#define hash_control_low 0x02(an_security_block)
+#define hash_status 0x04(an_security_block)
+
+#define hash_input_0 0x30(an_security_block)
+#define hash_input_1 0x34(an_security_block)
+#define hash_input_2 0x38(an_security_block)
+#define hash_input_3 0x3c(an_security_block)
+#define hash_input_4 0x40(an_security_block)
+
+#define hash_output_0 0x70(an_security_block)
+#define hash_output_0_low 0x72(an_security_block)
+#define hash_output_1 0x74(an_security_block)
+#define hash_output_1_low 0x76(an_security_block)
+#define hash_output_2 0x78(an_security_block)
+#define hash_output_2_low 0x7a(an_security_block)
+#define hash_output_3 0x7c(an_security_block)
+#define hash_output_3_low 0x7e(an_security_block)
+
+;*****************************************************************************************
+; Assembly macros
+;*****************************************************************************************
+ ; C compiler reserves RP (A5) for return address during subroutine call.
+ ; Use RP to return to caller
+.macro call_return_macro
+ calli RP, 0(RP)
+.endm
+
+#if 0
+;*****************************************************************************************
+; void md5_ip5k_init(void)
+; initialize the output registers of the hash module
+;
+ ;.section .text.md5_ip5k_init,"ax",@progbits
+ .section .text
+ .global _md5_ip5k_init
+ .func md5_ip5k_init, _md5_ip5k_init
+
+_md5_ip5k_init:
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
+
+ movei hash_output_0, #%hi(HASH_MD5_IN0)
+ movei hash_output_0_low, #%lo(HASH_MD5_IN0)
+
+ movei hash_output_1, #%hi(HASH_MD5_IN1)
+ movei hash_output_1_low, #%lo(HASH_MD5_IN1)
+
+ movei hash_output_2, #%hi(HASH_MD5_IN2)
+ movei hash_output_2_low, #%lo(HASH_MD5_IN2)
+
+ movei hash_output_3, #%hi(HASH_MD5_IN3)
+ movei hash_output_3_low, #%lo(HASH_MD5_IN3)
+
+ call_return_macro
+ .endfunc
+#endif
+
+;*****************************************************************************************
+; void md5_ip5k_init_digest(u32_t *hash_input)
+; initialize the output registers of the hash module
+
+ ;.section .text.md5_ip5k_init_digest,"ax",@progbits
+ .section .text
+ .global _md5_ip5k_init_digest
+ .func md5_ip5k_init_digest, _md5_ip5k_init_digest
+
+_md5_ip5k_init_digest:
+ movea an_data_input, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5)
+
+ move.4 hash_output_0, (an_data_input)4++
+ move.4 hash_output_1, (an_data_input)4++
+ move.4 hash_output_2, (an_data_input)4++
+ move.4 hash_output_3, (an_data_input)4++
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+; void md5_ip5k_transform(u32_t *data_input)
+; performs intermediate transformation step for the hash calculation
+;
+ ;.sect .text.md5_ip5k_transform,"ax",@progbits
+ .section .text
+ .global _md5_ip5k_transform
+ .func md5_ip5k_transform, _md5_ip5k_transform
+
+_md5_ip5k_transform:
+ movea an_data_input, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ ; Write the first 128bits (16 bytes)
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ pipe_flush 0
+
+md5_ip5k_transform_wait:
+ ; wait for the module to calculate the output hash
+ btst hash_status, #0
+ jmpne.f md5_ip5k_transform_wait
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+; void md5_ip5k_get_digest(u32_t *digest)
+; Return the hash of the input data
+;
+ ;.sect .text.md5_get_digest,"ax",@progbits
+ .section .text
+ .global _md5_ip5k_get_digest
+ .func md5_ip5k_get_digest, _md5_ip5k_get_digest
+
+_md5_ip5k_get_digest:
+ movea an_digest, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ ; we have finished
+ move.4 0(an_digest), hash_output_0
+ move.4 4(an_digest), hash_output_1
+ move.4 8(an_digest), hash_output_2
+ move.4 12(an_digest), hash_output_3
+
+ call_return_macro
+ .endfunc
+
--- /dev/null
+++ b/arch/ubicom32/crypto/md5_ubicom32.c
@@ -0,0 +1,200 @@
+/*
+ * arch/ubicom32/crypto/md5_ubicom32.c
+ * Ubicom32 implementation of the MD5 Secure Hash Algorithm
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+
+#include "crypto_ubicom32.h"
+
+#define MD5_DIGEST_SIZE 16
+#define MD5_BLOCK_SIZE 64
+#define MD5_HASH_WORDS 4
+
+extern void _md5_ip5k_init_digest(u32_t *digest);
+extern void _md5_ip5k_transform(u32_t *data_input);
+extern void _md5_ip5k_get_digest(u32_t *digest);
+
+struct ubicom32_md5_ctx {
+ u64 count; /* message length */
+ u32 state[MD5_HASH_WORDS];
+ u8 buf[2 * MD5_BLOCK_SIZE];
+};
+
+static void md5_init(struct crypto_tfm *tfm)
+{
+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
+ mctx->state[0] = 0x01234567;
+ mctx->state[1] = 0x89abcdef;
+ mctx->state[2] = 0xfedcba98;
+ mctx->state[3] = 0x76543210;
+
+ mctx->count = 0;
+}
+
+static inline void _md5_process(u32 *digest, const u8 *data)
+{
+ _md5_ip5k_transform((u32 *)data);
+}
+
+static void md5_update(struct crypto_tfm *tfm, const u8 *data,
+ unsigned int len)
+{
+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
+ int index, clen;
+
+ /* how much is already in the buffer? */
+ index = mctx->count & 0x3f;
+
+ mctx->count += len;
+
+ if (index + len < MD5_BLOCK_SIZE) {
+ goto store_only;
+ }
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ /* init digest set ctrl register too */
+ _md5_ip5k_init_digest(mctx->state);
+
+ if (unlikely(index == 0 && SEC_ALIGNED(data))) {
+fast_process:
+ while (len >= MD5_BLOCK_SIZE) {
+ _md5_process(mctx->state, data);
+ data += MD5_BLOCK_SIZE;
+ len -= MD5_BLOCK_SIZE;
+ }
+ goto store;
+ }
+
+ /* process one stored block */
+ if (index) {
+ clen = MD5_BLOCK_SIZE - index;
+ memcpy(mctx->buf + index, data, clen);
+ _md5_process(mctx->state, mctx->buf);
+ data += clen;
+ len -= clen;
+ index = 0;
+ }
+
+ if (likely(SEC_ALIGNED(data))) {
+ goto fast_process;
+ }
+
+ /* process as many blocks as possible */
+ while (len >= MD5_BLOCK_SIZE) {
+ memcpy(mctx->buf, data, MD5_BLOCK_SIZE);
+ _md5_process(mctx->state, mctx->buf);
+ data += MD5_BLOCK_SIZE;
+ len -= MD5_BLOCK_SIZE;
+ }
+
+store:
+ _md5_ip5k_get_digest(mctx->state);
+ hw_crypto_unlock();
+
+store_only:
+ /* anything left? */
+ if (len)
+ memcpy(mctx->buf + index , data, len);
+}
+
+/* Add padding and return the message digest. */
+static void md5_final(struct crypto_tfm *tfm, u8 *out)
+{
+ struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm);
+ u32 bits[2];
+ unsigned int index, end;
+
+ /* must perform manual padding */
+ index = mctx->count & 0x3f;
+ end = (index < 56) ? MD5_BLOCK_SIZE : (2 * MD5_BLOCK_SIZE);
+
+ /* start pad with 1 */
+ mctx->buf[index] = 0x80;
+
+ /* pad with zeros */
+ index++;
+ memset(mctx->buf + index, 0x00, end - index - 8);
+
+ /* append message length */
+ bits[0] = mctx->count << 3;
+ bits[1] = mctx->count >> 29;
+ __cpu_to_le32s(bits);
+ __cpu_to_le32s(bits + 1);
+
+ memcpy(mctx->buf + end - 8, &bits, sizeof(bits));
+
+ /* force to use the mctx->buf and ignore the partial buf */
+ mctx->count = mctx->count & ~0x3f;
+ md5_update(tfm, mctx->buf, end);
+
+ /* copy digest to out */
+ memcpy(out, mctx->state, MD5_DIGEST_SIZE);
+
+ /* wipe context */
+ memset(mctx, 0, sizeof *mctx);
+}
+
+static struct crypto_alg alg = {
+ .cra_name = "md5",
+ .cra_driver_name= "md5-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
+ .cra_blocksize = MD5_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_md5_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
+ .cra_u = {
+ .digest = {
+ .dia_digestsize = MD5_DIGEST_SIZE,
+ .dia_init = md5_init,
+ .dia_update = md5_update,
+ .dia_final = md5_final,
+ }
+ }
+};
+
+static int __init init(void)
+{
+ hw_crypto_init();
+ return crypto_register_alg(&alg);
+}
+
+static void __exit fini(void)
+{
+ crypto_unregister_alg(&alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_ALIAS("md5");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MD5 Secure Hash Algorithm");
--- /dev/null
+++ b/arch/ubicom32/crypto/sha1_ubicom32_asm.S
@@ -0,0 +1,244 @@
+/*
+ * arch/ubicom32/crypto/sha1_ubicom32_asm.S
+ * SHA1 hash support for Ubicom32 architecture V3.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#define __ASM__
+#include <asm/ip5000.h>
+
+#ifndef RP
+#define RP A5
+#endif
+
+;*****************************************************************************************
+; The function prototype
+;*****************************************************************************************
+; void sha1_ip5k_init(void)
+; void sha1_ip5k_transform(u32_t *data_input)
+; void sha1_ip5k_output(u32_t *digest)
+
+;*****************************************************************************************
+; Inputs
+;*****************************************************************************************
+; data_input is the pointer to the block of data over which the digest will be calculated.
+; It should be word aligned.
+;
+; digest is the pointer to the block of data into which the digest (the output) will be written.
+; It should be word aligned.
+;
+
+;*****************************************************************************************
+; Outputs
+;*****************************************************************************************
+; None
+
+;*****************************************************************************************
+; Hash Constants
+;*****************************************************************************************
+#define HASH_SHA1_IN0 0x67452301
+#define HASH_SHA1_IN1 0xefcdab89
+#define HASH_SHA1_IN2 0x98badcfe
+#define HASH_SHA1_IN3 0x10325476
+#define HASH_SHA1_IN4 0xc3d2e1f0
+
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
+
+;*****************************************************************************************
+; An: Address Registers
+;*****************************************************************************************
+#define an_digest a4
+#define an_data_input a4
+#define an_security_block a3
+
+;*****************************************************************************************
+; Hash related defines
+;*****************************************************************************************
+#define hash_control 0x00(an_security_block)
+#define hash_control_low 0x02(an_security_block)
+#define hash_status 0x04(an_security_block)
+
+#define hash_input_0 0x30(an_security_block)
+#define hash_input_1 0x34(an_security_block)
+#define hash_input_2 0x38(an_security_block)
+#define hash_input_3 0x3c(an_security_block)
+#define hash_input_4 0x40(an_security_block)
+
+#define hash_output_0 0x70(an_security_block)
+#define hash_output_0_low 0x72(an_security_block)
+#define hash_output_1 0x74(an_security_block)
+#define hash_output_1_low 0x76(an_security_block)
+#define hash_output_2 0x78(an_security_block)
+#define hash_output_2_low 0x7a(an_security_block)
+#define hash_output_3 0x7c(an_security_block)
+#define hash_output_3_low 0x7e(an_security_block)
+#define hash_output_4 0x80(an_security_block)
+#define hash_output_4_low 0x82(an_security_block)
+
+;*****************************************************************************************
+; Assembly macros
+;*****************************************************************************************
+ ; C compiler reserves RP (A5) for return address during subroutine call.
+ ; Use RP to return to caller
+.macro call_return_macro
+ calli RP, 0(RP)
+.endm
+
+;*****************************************************************************************
+; void sha1_ip5k_init(void)
+; initialize the output registers of the hash module
+
+ ;.section .text.sha1_ip5k_init,"ax",@progbits
+ .section .ocm_text,"ax",@progbits
+ .global _sha1_ip5k_init
+ .func sha1_ip5k_init, _sha1_ip5k_init
+
+_sha1_ip5k_init:
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
+
+ movei hash_output_0, #%hi(HASH_SHA1_IN0)
+ movei hash_output_0_low, #%lo(HASH_SHA1_IN0)
+
+ movei hash_output_1, #%hi(HASH_SHA1_IN1)
+ movei hash_output_1_low, #%lo(HASH_SHA1_IN1)
+
+ movei hash_output_2, #%hi(HASH_SHA1_IN2)
+ movei hash_output_2_low, #%lo(HASH_SHA1_IN2)
+
+ movei hash_output_3, #%hi(HASH_SHA1_IN3)
+ movei hash_output_3_low, #%lo(HASH_SHA1_IN3)
+
+ movei hash_output_4, #%hi(HASH_SHA1_IN4)
+ movei hash_output_4_low, #%lo(HASH_SHA1_IN4)
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+; void sha1_ip5k_init_digest(u32_t *hash_input)
+; initialize the output registers of the hash module
+
+ ;.section .text.sha1_ip5k_init_digest,"ax",@progbits
+ .section .ocm_text,"ax",@progbits
+ .global _sha1_ip5k_init_digest
+ .func sha1_ip5k_init_digest, _sha1_ip5k_init_digest
+
+_sha1_ip5k_init_digest:
+ movea an_data_input, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
+ movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1)
+
+ move.4 hash_output_0, (an_data_input)4++
+ move.4 hash_output_1, (an_data_input)4++
+ move.4 hash_output_2, (an_data_input)4++
+ move.4 hash_output_3, (an_data_input)4++
+ move.4 hash_output_4, (an_data_input)4++
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+; void sha1_ip5k_transform(u32_t *data_input)
+; performs intermediate transformation step for the hash calculation
+
+ ;.section .text.sha1_ip5k_transform,"ax",@progbits
+ .section .ocm_text,"ax",@progbits
+ .global _sha1_ip5k_transform
+ .func sha1_ip5k_transform, _sha1_ip5k_transform
+
+_sha1_ip5k_transform:
+ movea an_data_input, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ ; Write the first 128bits (16 bytes)
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ move.4 hash_input_0, (an_data_input)4++
+ move.4 hash_input_1, (an_data_input)4++
+ move.4 hash_input_2, (an_data_input)4++
+ move.4 hash_input_3, (an_data_input)4++
+ move.4 hash_input_4, D0
+
+ pipe_flush 0
+
+sha1_ip5k_transform_wait:
+ ; wait for the module to calculate the output hash
+ btst hash_status, #0
+ jmpne.f sha1_ip5k_transform_wait
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+; void sha1_ip5k_output(u32_t *digest)
+; Return the hash of the input data
+
+ ;.section .text.sha1_ip5k_output,"ax",@progbits
+ .section .ocm_text,"ax",@progbits
+ .global _sha1_ip5k_output
+ .func sha1_ip5k_output, _sha1_ip5k_output
+
+_sha1_ip5k_output:
+ movea an_digest, D0
+
+ moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS
+
+ ; we have finished
+ move.4 0(an_digest), hash_output_0
+ move.4 4(an_digest), hash_output_1
+ move.4 8(an_digest), hash_output_2
+ move.4 12(an_digest), hash_output_3
+ move.4 16(an_digest), hash_output_4
+
+ call_return_macro
+ .endfunc
+
+;*****************************************************************************************
+;END ;End of program code
+;*****************************************************************************************
--- /dev/null
+++ b/arch/ubicom32/crypto/sha1_ubicom32.c
@@ -0,0 +1,354 @@
+/*
+ * arch/ubicom32/crypto/sha1_ubicom32.c
+ * Ubicom32 implementation of the SHA1 Secure Hash Algorithm.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <crypto/sha.h>
+#include <asm/linkage.h>
+
+#include "crypto_ubicom32.h"
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2
+#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION)
+
+struct ubicom32_sha1_ctx {
+ u64 count; /* message length */
+ u32 state[5];
+ u8 buf[2 * SHA1_BLOCK_SIZE];
+};
+
+static inline void sha1_clear_2ws(u8 *buf, int wc)
+{
+ asm volatile (
+ "1: move.4 (%0)4++, #0 \n\t"
+ " move.4 (%0)4++, #0 \n\t"
+ " sub.4 %1, #2, %1 \n\t"
+ " jmple.f 1b \n\t"
+ :
+ : "a" (buf), "d" (wc)
+ : "cc"
+ );
+}
+
+/* only wipe out count, state, and 1st half of buf - 9 bytes at most */
+#define sha1_wipe_out(sctx) sha1_clear_2ws((u8 *)sctx, 2 + 5 + 16 - 2)
+
+static inline void sha1_init_digest(u32 *digest)
+{
+ hw_crypto_set_ctrl(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1);
+ asm volatile (
+ " ; move digests to hash_output regs \n\t"
+ " move.4 0x70(%0), 0x0(%1) \n\t"
+ " move.4 0x74(%0), 0x4(%1) \n\t"
+ " move.4 0x78(%0), 0x8(%1) \n\t"
+ " move.4 0x7c(%0), 0xc(%1) \n\t"
+ " move.4 0x80(%0), 0x10(%1) \n\t"
+ :
+ : "a" (SEC_BASE), "a" (digest)
+ );
+}
+
+static inline void sha1_transform_feed(const u8 *in)
+{
+ asm volatile (
+ " ; write the 1st 16 bytes \n\t"
+ " move.4 0x30(%0), 0x0(%1) \n\t"
+ " move.4 0x34(%0), 0x4(%1) \n\t"
+ " move.4 0x38(%0), 0x8(%1) \n\t"
+ " move.4 0x3c(%0), 0xc(%1) \n\t"
+ " move.4 0x40(%0), %1 \n\t"
+ " ; write the 2nd 16 bytes \n\t"
+ " move.4 0x30(%0), 0x10(%1) \n\t"
+ " move.4 0x34(%0), 0x14(%1) \n\t"
+ " move.4 0x38(%0), 0x18(%1) \n\t"
+ " move.4 0x3c(%0), 0x1c(%1) \n\t"
+ " move.4 0x40(%0), %1 \n\t"
+ " ; write the 3rd 16 bytes \n\t"
+ " move.4 0x30(%0), 0x20(%1) \n\t"
+ " move.4 0x34(%0), 0x24(%1) \n\t"
+ " move.4 0x38(%0), 0x28(%1) \n\t"
+ " move.4 0x3c(%0), 0x2c(%1) \n\t"
+ " move.4 0x40(%0), %1 \n\t"
+ " ; write the 4th 16 bytes \n\t"
+ " move.4 0x30(%0), 0x30(%1) \n\t"
+ " move.4 0x34(%0), 0x34(%1) \n\t"
+ " move.4 0x38(%0), 0x38(%1) \n\t"
+ " move.4 0x3c(%0), 0x3c(%1) \n\t"
+ " move.4 0x40(%0), %1 \n\t"
+ " pipe_flush 0 \n\t"
+ :
+ : "a"(SEC_BASE), "a"(in)
+ );
+}
+
+static inline void sha1_transform_wait(void)
+{
+ asm volatile (
+ " btst 0x04(%0), #0 \n\t"
+ " jmpne.f -4 \n\t"
+ :
+ : "a"(SEC_BASE)
+ : "cc"
+ );
+}
+
+static inline void sha1_output_digest(u32 *digest)
+{
+ asm volatile (
+ " move.4 0x0(%1), 0x70(%0) \n\t"
+ " move.4 0x4(%1), 0x74(%0) \n\t"
+ " move.4 0x8(%1), 0x78(%0) \n\t"
+ " move.4 0xc(%1), 0x7c(%0) \n\t"
+ " move.4 0x10(%1), 0x80(%0) \n\t"
+ :
+ : "a" (SEC_BASE), "a" (digest)
+ );
+}
+
+static __ocm_text void sha1_init(struct crypto_tfm *tfm)
+{
+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+
+ sctx->state[0] = SHA1_H0;
+ sctx->state[1] = SHA1_H1;
+ sctx->state[2] = SHA1_H2;
+ sctx->state[3] = SHA1_H3;
+ sctx->state[4] = SHA1_H4;
+ sctx->count = 0;
+}
+
+static void __ocm_text sha1_update(struct crypto_tfm *tfm, const u8 *data,
+ unsigned int len)
+{
+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+ int index, clen;
+
+ /* how much is already in the buffer? */
+ index = sctx->count & 0x3f;
+
+ sctx->count += len;
+
+ if (index + len < SHA1_BLOCK_SIZE) {
+ goto store_only;
+ }
+
+ hw_crypto_lock();
+ hw_crypto_check();
+
+ /* init digest set ctrl register too */
+ sha1_init_digest(sctx->state);
+
+ if (unlikely(index == 0 && SEC_ALIGNED(data))) {
+fast_process:
+#if CRYPTO_UBICOM32_LOOP_ASM
+ if (likely(len >= SHA1_BLOCK_SIZE)) {
+ register unsigned int cnt = len >> 6; // loop = len / 64;
+ sha1_transform_feed(data);
+ data += SHA1_BLOCK_SIZE;
+
+ /* cnt is pre-decremented in the loop */
+ asm volatile (
+ "; while (--loop): work on 2nd block \n\t"
+ "1: add.4 %2, #-1, %2 \n\t"
+ " jmpeq.f 5f \n\t"
+ " \n\t"
+ " ; write the 1st 16 bytes \n\t"
+ " move.4 0x30(%1), (%0)4++ \n\t"
+ " move.4 0x34(%1), (%0)4++ \n\t"
+ " move.4 0x38(%1), (%0)4++ \n\t"
+ " move.4 0x3c(%1), (%0)4++ \n\t"
+ " ; can not kick off hw before it \n\t"
+ " ; is done with the prev block \n\t"
+ " \n\t"
+ " btst 0x04(%1), #0 \n\t"
+ " jmpne.f -4 \n\t"
+ " \n\t"
+ " ; tell hw to load 1st 16 bytes \n\t"
+ " move.4 0x40(%1), %2 \n\t"
+ " \n\t"
+ " ; write the 2nd 16 bytes \n\t"
+ " move.4 0x30(%1), (%0)4++ \n\t"
+ " move.4 0x34(%1), (%0)4++ \n\t"
+ " move.4 0x38(%1), (%0)4++ \n\t"
+ " move.4 0x3c(%1), (%0)4++ \n\t"
+ " move.4 0x40(%1), %2 \n\t"
+ " \n\t"
+ " ; write the 3rd 16 bytes \n\t"
+ " move.4 0x30(%1), (%0)4++ \n\t"
+ " move.4 0x34(%1), (%0)4++ \n\t"
+ " move.4 0x38(%1), (%0)4++ \n\t"
+ " move.4 0x3c(%1), (%0)4++ \n\t"
+ " move.4 0x40(%1), %2 \n\t"
+ " \n\t"
+ " ; write the 4th 16 bytes \n\t"
+ " move.4 0x30(%1), (%0)4++ \n\t"
+ " move.4 0x34(%1), (%0)4++ \n\t"
+ " move.4 0x38(%1), (%0)4++ \n\t"
+ " move.4 0x3c(%1), (%0)4++ \n\t"
+ " move.4 0x40(%1), %2 \n\t"
+ " \n\t"
+ "; no need flush, enough insts \n\t"
+ "; before next hw wait \n\t"
+ " \n\t"
+ "; go back to loop \n\t"
+ " jmpt 1b \n\t"
+ " \n\t"
+ "; wait hw for last block \n\t"
+ "5: btst 0x04(%1), #0 \n\t"
+ " jmpne.f -4 \n\t"
+ " \n\t"
+ : "+a" (data)
+ : "a"( SEC_BASE), "d" (cnt)
+ : "cc"
+ );
+
+ len = len & (64 - 1);
+ }
+#else
+ while (likely(len >= SHA1_BLOCK_SIZE)) {
+ sha1_transform_feed(data);
+ data += SHA1_BLOCK_SIZE;
+ len -= SHA1_BLOCK_SIZE;
+ sha1_transform_wait();
+ }
+#endif
+ goto store;
+ }
+
+ /* process one stored block */
+ if (index) {
+ clen = SHA1_BLOCK_SIZE - index;
+ memcpy(sctx->buf + index, data, clen);
+ sha1_transform_feed(sctx->buf);
+ data += clen;
+ len -= clen;
+ index = 0;
+ sha1_transform_wait();
+ }
+
+ if (likely(SEC_ALIGNED(data))) {
+ goto fast_process;
+ }
+
+ /* process as many blocks as possible */
+ if (likely(len >= SHA1_BLOCK_SIZE)) {
+ memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
+ do {
+ sha1_transform_feed(sctx->buf);
+ data += SHA1_BLOCK_SIZE;
+ len -= SHA1_BLOCK_SIZE;
+ if (likely(len >= SHA1_BLOCK_SIZE)) {
+ memcpy(sctx->buf, data, SHA1_BLOCK_SIZE);
+ sha1_transform_wait();
+ continue;
+ }
+ /* it is the last block */
+ sha1_transform_wait();
+ break;
+ } while (1);
+ }
+
+store:
+ sha1_output_digest(sctx->state);
+ hw_crypto_unlock();
+
+store_only:
+ /* anything left? */
+ if (len)
+ memcpy(sctx->buf + index , data, len);
+}
+
+/* Add padding and return the message digest. */
+static void __ocm_text sha1_final(struct crypto_tfm *tfm, u8 *out)
+{
+ struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+ u64 bits;
+ unsigned int index, end;
+
+ /* must perform manual padding */
+ index = sctx->count & 0x3f;
+ end = (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE);
+
+ /* start pad with 1 */
+ sctx->buf[index] = 0x80;
+
+ /* pad with zeros */
+ index++;
+ memset(sctx->buf + index, 0x00, end - index - 8);
+
+ /* append message length */
+ bits = sctx->count << 3 ;
+ SEC_COPY_2W(sctx->buf + end - 8, &bits);
+
+ /* force to use the sctx->buf and ignore the partial buf */
+ sctx->count = sctx->count & ~0x3f;
+ sha1_update(tfm, sctx->buf, end);
+
+ /* copy digest to out */
+ SEC_COPY_5W(out, sctx->state);
+
+ /* wipe context */
+ sha1_wipe_out(sctx);
+}
+
+static struct crypto_alg alg = {
+ .cra_name = "sha1",
+ .cra_driver_name= "sha1-ubicom32",
+ .cra_priority = CRYPTO_UBICOM32_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_DIGEST,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ubicom32_sha1_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
+ .cra_u = {
+ .digest = {
+ .dia_digestsize = SHA1_DIGEST_SIZE,
+ .dia_init = sha1_init,
+ .dia_update = sha1_update,
+ .dia_final = sha1_final,
+ }
+ }
+};
+
+static int __init init(void)
+{
+ hw_crypto_init();
+ return crypto_register_alg(&alg);
+}
+
+static void __exit fini(void)
+{
+ crypto_unregister_alg(&alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_ALIAS("sha1");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
--- /dev/null
+++ b/arch/ubicom32/include/asm/a.out.h
@@ -0,0 +1,47 @@
+/*
+ * arch/ubicom32/include/asm/a.out.h
+ * Definitions for Ubicom32 a.out executable format.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_A_OUT_H
+#define _ASM_UBICOM32_A_OUT_H
+
+struct exec
+{
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file, in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in bytes */
+ unsigned a_drsize; /* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#endif /* _ASM_UBICOM32_A_OUT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/atomic.h
@@ -0,0 +1,352 @@
+/*
+ * arch/ubicom32/include/asm/atomic.h
+ * Atomic operations definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ATOMIC_H
+#define _ASM_UBICOM32_ATOMIC_H
+
+#include <asm/system.h>
+#include <asm/ubicom32-common.h>
+#include <asm/types.h>
+
+/*
+ * Most instructions on the Ubicom32 processor are atomic in that they
+ * execute in one clock cycle. However, Linux has several operations
+ * (e.g. compare and swap) which will require more than a single instruction
+ * to perform. To achieve this, the Ubicom32 processor uses a single
+ * global bit in a scratchpad register as a critical section lock. All
+ * atomic operations acquire this lock.
+ *
+ * NOTE: To AVOID DEADLOCK(s), the atomic lock must only be used for atomic
+ * operations or by the ldsr to avoid disabling a thread performing an atomic
+ * operation.
+ *
+ * Do not attempt to disable interrupts while holding the atomic operations
+ * lock or you will DEADLOCK the system.
+ */
+
+typedef struct {
+ volatile int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+/*
+ * __atomic_add()
+ * Add i to v and return the result.
+ */
+static inline void __atomic_add(int i, atomic_t *v)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter += i;
+ __atomic_lock_release();
+}
+
+/*
+ * __atomic_sub()
+ * Subtract i from v and return the result.
+ */
+static inline void __atomic_sub(int i, atomic_t *v)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter -= i;
+ __atomic_lock_release();
+}
+
+/*
+ * __atomic_add_return()
+ * Add i to v and return the result.
+ *
+ * The implementation here looks rather odd because we appear to be doing
+ * the addition twice. In fact that's exactly what we're doing but with
+ * the ubicom32 instruction set we can do the inner load and add with two
+ * instructions whereas generating both the atomic result and the "ret"
+ * result requires three instructions. The second add is generally only as
+ * costly as a move instruction and in cases where we compare the result
+ * with a constant the compiler can fold two constant values and do a
+ * single instruction, thus saving an instruction overall!
+ *
+ * At the worst we save one instruction inside the atomic lock.
+ */
+static inline int __atomic_add_return(int i, atomic_t *v)
+{
+ int ret;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ vt->counter = ret + i;
+ __atomic_lock_release();
+
+ return ret + i;
+}
+
+/*
+ * __atomic_sub_return()
+ * Subtract i from v and return the result.
+ *
+ * The implementation here looks rather odd because we appear to be doing
+ * the subtraction twice. In fact that's exactly what we're doing but with
+ * the ubicom32 instruction set we can do the inner load and sub with two
+ * instructions whereas generating both the atomic result and the "ret"
+ * result requires three instructions. The second sub is generally only as
+ * costly as a move instruction and in cases where we compare the result
+ * with a constant the compiler can fold two constant values and do a
+ * single instruction, thus saving an instruction overall!
+ *
+ * At the worst we save one instruction inside the atomic lock.
+ */
+static inline int __atomic_sub_return(int i, atomic_t *v)
+{
+ int ret;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ vt->counter = ret - i;
+ __atomic_lock_release();
+
+ return ret - i;
+}
+
+/*
+ * PUBLIC API FOR ATOMIC!
+ */
+#define atomic_add(i,v) (__atomic_add( ((int)i),(v)))
+#define atomic_sub(i,v) (__atomic_sub( ((int)i),(v)))
+#define atomic_inc(v) (__atomic_add( 1,(v)))
+#define atomic_dec(v) (__atomic_sub( 1,(v)))
+#define atomic_add_return(i,v) (__atomic_add_return( ((int)i),(v)))
+#define atomic_sub_return(i,v) (__atomic_sub_return( ((int)i),(v)))
+#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
+#define atomic_dec_return(v) (__atomic_sub_return( 1,(v)))
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0)
+
+/*
+ * atomic_read()
+ * Acquire the atomic lock and read the variable.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+ int ret;
+ const atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ ret = vt->counter;
+ __atomic_lock_release();
+
+ return ret;
+}
+
+/*
+ * atomic_set()
+ * Acquire the atomic lock and set the variable.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ vt->counter = i;
+ __atomic_lock_release();
+}
+
+/*
+ * atomic_cmpxchg
+ * Acquire the atomic lock and exchange if current == old.
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ if (prev == old) {
+ vt->counter = new;
+ }
+ __atomic_lock_release();
+
+ return prev;
+}
+
+/*
+ * atomic_xchg()
+ * Acquire the atomic lock and exchange values.
+ */
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ vt->counter = new;
+ __atomic_lock_release();
+
+ return prev;
+}
+
+/*
+ * atomic_add_unless()
+ * Acquire the atomic lock and add a unless the value is u.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int prev;
+ atomic_t *vt = v;
+
+ __atomic_lock_acquire();
+ prev = vt->counter;
+ if (prev != u) {
+ vt->counter += a;
+ __atomic_lock_release();
+ return 1;
+ }
+
+ __atomic_lock_release();
+ return 0;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#include <asm-generic/atomic.h>
+
+/*
+ * The following is not a real function. The compiler should remove the function
+ * call as long as the user does not pass in a size that __xchg and __cmpxchg
+ * are not prepared for. If the user does pass in an unknown size, the user
+ * will get a link time error.
+ *
+ * The no return is to prevent a compiler error that can occur when dealing with
+ * uninitialized variables. Given that the function doesn't exist there is no
+ * net effect (and if it did it would not return).
+ */
+extern void __xchg_called_with_bad_pointer(void) __attribute__((noreturn));
+
+/*
+ * __xchg()
+ * Xchange *ptr for x atomically.
+ *
+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
+ * atomic exchange instruction so we use the global atomic_lock.
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+ unsigned long ret;
+
+ __atomic_lock_acquire();
+
+ switch (size) {
+ case 1:
+ ret = *(volatile unsigned char *)ptr;
+ *(volatile unsigned char *)ptr = x;
+ break;
+
+ case 2:
+ ret = *(volatile unsigned short *)ptr;
+ *(volatile unsigned short *)ptr = x;
+ break;
+
+ case 4:
+ ret = *(volatile unsigned int *)ptr;
+ *(volatile unsigned int *)ptr = x;
+ break;
+
+ default:
+ __xchg_called_with_bad_pointer();
+ break;
+ }
+ __atomic_lock_release();
+ return ret;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+/*
+ * __cmpxchg()
+ * Compare and Xchange *ptr for x atomically.
+ *
+ * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an
+ * atomic exchange instruction so we use the global atomic_lock.
+ */
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long next, int size)
+{
+ unsigned long prev;
+
+ __atomic_lock_acquire();
+ switch (size) {
+ case 1:
+ prev = *(u8 *)ptr;
+ if (prev == old) {
+ *(u8 *)ptr = (u8)next;
+ }
+ break;
+
+ case 2:
+ prev = *(u16 *)ptr;
+ if (prev == old) {
+ *(u16 *)ptr = (u16)next;
+ }
+ break;
+
+ case 4:
+ prev = *(u32 *)ptr;
+ if (prev == old) {
+ *(u32 *)ptr = (u32)next;
+ }
+ break;
+
+ default:
+ __xchg_called_with_bad_pointer();
+ break;
+ }
+ __atomic_lock_release();
+ return prev;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
+
+#define cmpxchg(ptr, o, n) __cmpxchg((ptr), (o), (n), sizeof(*(ptr)))
+
+#define smp_mb__before_atomic_inc() asm volatile ("" : : : "memory")
+#define smp_mb__after_atomic_inc() asm volatile ("" : : : "memory")
+#define smp_mb__before_atomic_dec() asm volatile ("" : : : "memory")
+#define smp_mb__after_atomic_dec() asm volatile ("" : : : "memory")
+
+#endif /* _ASM_UBICOM32_ATOMIC_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/audio_tio.h
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/audio_tio.h
+ * AudioTIO include file
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _AUDIO_TIO_H
+#define _AUDIO_TIO_H
+
+#include <asm/devtree.h>
+#include <asm/ubi32-pcm.h>
+
+#define UBI32_AUDIO_INT_FLAG_MORE_SAMPLES 0x00000001
+#define UBI32_AUDIO_INT_FLAG_COMMAND 0x00000002
+
+/*
+ * Commands the Primary OS sends to the audio device
+ */
+enum ubi32_audio_command {
+ UBI32_AUDIO_CMD_NONE,
+ UBI32_AUDIO_CMD_START,
+ UBI32_AUDIO_CMD_STOP,
+ UBI32_AUDIO_CMD_PAUSE,
+ UBI32_AUDIO_CMD_RESUME,
+ UBI32_AUDIO_CMD_MUTE,
+ UBI32_AUDIO_CMD_UNMUTE,
+ UBI32_AUDIO_CMD_SETUP,
+ UBI32_AUDIO_CMD_ENABLE,
+ UBI32_AUDIO_CMD_DISABLE,
+};
+
+/*
+ * Flag bits passed in the registers
+ */
+#define UBI32_CMD_SETUP_FLAG_LE (1 << 0) /* Use Little Endian Mode */
+
+/*
+ * Status bits that audio device can set to indicate reason
+ * for interrupting the Primary OS
+ */
+#define UBI32_AUDIO_STATUS_PLAY_DMA0_REQUEST (1 << 0) /* Audio device needs samples in DMA0 for playback */
+#define UBI32_AUDIO_STATUS_PLAY_DMA1_REQUEST (1 << 1) /* Audio device needs samples in DMA1 for playback */
+
+struct ubi32_audio_dma {
+ /*
+ * NOTE: The active flag shall only be SET by the producer and CLEARED
+ * by the consumer, NEVER the other way around. For playback, the
+ * Primary OS sets this flag and ipAudioTIO clears it.
+ *
+ * The producer shall not modify the ptr or ctr fields when the transfer
+ * is marked as active, as these are used by the consumer to do the
+ * transfer.
+ */
+ volatile uint32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
+ //volatile u32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */
+ volatile void *ptr; /* Pointer to data to be transferred */
+ volatile uint32_t ctr; /* Counter: number of data units to transfer */
+ //volatile u32_t ctr; /* Counter: number of data units to transfer */
+};
+
+#define AUDIOTIONODE_CAP_BE (1 << 0)
+#define AUDIOTIONODE_CAP_LE (1 << 1)
+
+/*
+ * Resource indices used to access IRQs via platform_get_resource
+ */
+#define AUDIOTIO_MEM_RESOURCE 0
+#define AUDIOTIO_TX_IRQ_RESOURCE 0
+#define AUDIOTIO_RX_IRQ_RESOURCE 1
+
+#define AUDIOTIONODE_VERSION 5
+struct audiotionode {
+ struct devtree_node dn;
+ uint32_t version; /* Version of this node */
+ struct audiotioregs *regs;
+};
+
+#define AUDIOTIOREGS_VERSION 3
+struct audiotioregs {
+ uint32_t version;
+ uint32_t caps; /* Capabilities of the driver */
+ u32_t *sample_rates; /* Sample Rates supported by this driver */
+ u32_t n_sample_rates; /* Number of sample rates supported by this driver */
+ u32_t channel_mask; /* The channel configs supported by this driver (bit 1 = 1 channel, etc) */
+ volatile uint32_t int_flags; /* Reason for interrupting audio device */
+ volatile enum ubi32_audio_command command; /* Command from Primary OS */
+ volatile uint32_t flags; /* Flag bits for this command */
+ volatile uint32_t channels; /* Number of channels in stream */
+ volatile uint32_t sample_rate; /* Sample rate */
+ volatile uint32_t status; /* Status bits sent from AudioTIO to Primary OS */
+ volatile void *current_read_pos; /* Position of next sample to be removed from Primary OS sample buffer */
+
+ /*
+ * These are the transfer requests. They are used in alternating
+ * order so that when ipAudioTIO is processing one request, the
+ * Primary OS can fill in the other one.
+ *
+ * NOTE: The active bit shall always be SET by the producer and
+ * CLEARED by the consumer, NEVER the other way around.
+ */
+ struct ubi32_audio_dma playback_xfer_requests[2];
+};
+
+extern struct platform_device * __init audio_tio_alloc(const char *driver_name, const char *node_name, int priv_size);
+
+#define audio_tio_priv(pdev) (((struct ubi32pcm_platform_data *)(((struct platform_device *)(pdev))->dev.platform_data))->priv_data)
+#endif
--- /dev/null
+++ b/arch/ubicom32/include/asm/auxvec.h
@@ -0,0 +1,32 @@
+/*
+ * arch/ubicom32/include/asm/auxvec.h
+ * Symbolic values for the entries in the auxiliary table
+ * put on the initial stack.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_AUXVEC_H
+#define _ASM_UBICOM32_AUXVEC_H
+
+#endif /* _ASM_UBICOM32_AUXVEC_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/bitops.h
@@ -0,0 +1,171 @@
+/*
+ * arch/ubicom32/include/asm/bitops.h
+ * Bit manipulation definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BITOPS_H
+#define _ASM_UBICOM32_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h> /* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+#include <asm/ubicom32-common.h>
+
+static inline void set_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p |= mask;
+ __atomic_lock_release();
+}
+
+static inline void clear_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p &= ~mask;
+ __atomic_lock_release();
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+static inline void change_bit(int bit, volatile unsigned long *p)
+{
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ *p ^= mask;
+ __atomic_lock_release();
+}
+
+static inline int test_and_set_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res | mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+static inline int test_and_clear_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res & ~mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+static inline int test_and_change_bit(int bit, volatile unsigned long *p)
+{
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ __atomic_lock_acquire();
+ res = *p;
+ *p = res ^ mask;
+ __atomic_lock_release();
+
+ return res & mask;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(int nr, const volatile unsigned long *addr)
+{
+ int * a = (int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) (__builtin_constant_p(nr) ? __constant_test_bit((nr),(addr)) : __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _ASM_UBICOM32_BITOPS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/board.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/board.h
+ * Board init and revision definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BOARD_H
+#define _ASM_UBICOM32_BOARD_H
+
+extern const char *board_get_revision(void);
+extern void __init board_init(void);
+
+#endif /* _ASM_UBICOM32_BOARD_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/bootargs.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/bootargs.h
+ * Kernel command line via the devtree API.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BOOTARGS_H
+#define _ASM_UBICOM32_BOOTARGS_H
+
+extern const char *bootargs_get_cmdline(void);
+extern void __init bootargs_init(void);
+
+#endif /* _ASM_UBICOM32_BOOTARGS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/bootinfo.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/bootinfo.h
+ * Definitions of firmware boot parameters passed to the kernel.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_BOOTINFO_H
+#define _ASM_UBICOM32_BOOTINFO_H
+
+/* Nothing for ubicom32 */
+
+#endif /* _ASM_UBICOM32_BOOTINFO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/bug.h
@@ -0,0 +1,53 @@
+/*
+ * arch/ubicom32/include/asm/bug.h
+ * Generic bug.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BUG_H
+#define _ASM_UBICOM32_BUG_H
+
+#include <linux/kernel.h>
+#include <asm/thread.h>
+
+#if defined(CONFIG_STOP_ON_BUG)
+/*
+ * __BUG_ON()
+ * Stall all threads to enable debugging.
+ */
+static inline void __BUG_ON(unsigned long c)
+{
+ if (unlikely(c)) {
+ THREAD_STALL;
+ }
+ return;
+}
+
+#define BUG_ON(c) __BUG_ON((unsigned long)(c))
+#define HAVE_ARCH_BUG_ON
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_UBICOM32_BUG_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/bugs.h
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/bugs.h
+ * Definition of check_bugs() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+#ifndef _ASM_UBICOM32_BUGS_H
+#define _ASM_UBICOM32_BUGS_H
+
+static void check_bugs(void)
+{
+}
+
+#endif /* _ASM_UBICOM32_BUGS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/byteorder.h
@@ -0,0 +1,48 @@
+/*
+ * arch/ubicom32/include/asm/byteorder.h
+ * Byte order swapping utility routines.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_BYTEORDER_H
+#define _ASM_UBICOM32_BYTEORDER_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#if defined(IP7000) || defined(IP7000_REV2)
+
+#define __arch__swab16 __builtin_ubicom32_swapb_2
+#define __arch__swab32 __builtin_ubicom32_swapb_4
+
+#endif /* IP7000 */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_UBICOM32_BYTEORDER_H */
+
--- /dev/null
+++ b/arch/ubicom32/include/asm/cachectl.h
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/cachectl.h
+ * Ubicom32 cache control definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHECTL_H
+#define _ASM_UBICOM32_CACHECTL_H
+
+#include <asm/ip5000.h>
+
+/*
+ * mem_cache_control()
+ * Special cache control operation
+ */
+extern void mem_cache_control(unsigned long cc, unsigned long begin_addr, unsigned long end_addr, unsigned long op);
+
+#endif /* _ASM_UBICOM32_CACHECTL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/cacheflush.h
@@ -0,0 +1,104 @@
+/*
+ * arch/ubicom32/include/asm/cacheflush.h
+ * Cache flushing definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHEFLUSH_H
+#define _ASM_UBICOM32_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+#include <asm/cachectl.h>
+#include <asm/ip5000.h>
+
+#define flush_cache_all() __flush_cache_all()
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) __flush_cache_all()
+#define flush_cache_page(vma, vmaddr) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#define flush_dcache_range(start, end) \
+do { \
+ /* Flush the data cache and invalidate the I cache. */ \
+ local_irq_disable(); \
+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
+ local_irq_enable(); \
+} while (0)
+
+#define flush_icache_range(start, end) \
+do { \
+ /* Flush the data cache and invalidate the I cache. */ \
+ local_irq_disable(); \
+ mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \
+ mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \
+ local_irq_enable(); \
+} while (0)
+
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * Cache handling for IP5000
+ */
+extern inline void mem_cache_invalidate_all(unsigned long cc)
+{
+ asm volatile (
+ " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
+ " nop \n\t"
+ " bclr "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t"
+ " pipe_flush 0 \n\t"
+ :
+ : "a"(cc)
+ : "cc"
+ );
+}
+
+static inline void __flush_cache_all(void)
+{
+ /*
+ * Flush Icache
+ */
+ mem_cache_invalidate_all(ICCR_BASE);
+
+ /*
+ * Flush Dcache
+ */
+ mem_cache_invalidate_all(DCCR_BASE);
+}
+
+#endif /* _ASM_UBICOM32_CACHEFLUSH_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/cache.h
@@ -0,0 +1,40 @@
+/*
+ * arch/ubicom32/include/asm/cache.h
+ * Cache line definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CACHE_H
+#define _ASM_UBICOM32_CACHE_H
+
+/*
+ * bytes per L1 cache line
+ */
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif /* _ASM_UBICOM32_CACHE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/checksum.h
@@ -0,0 +1,149 @@
+/*
+ * arch/ubicom32/include/asm/checksum.h
+ * Checksum utilities for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CHECKSUM_H
+#define _ASM_UBICOM32_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ asm volatile (
+ " lsr.4 d15, %0, #16 \n\t"
+ " bfextu %0, %0, #16 \n\t"
+ " add.4 %0, d15, %0 \n\t"
+ " lsr.4 d15, %0, #16 \n\t"
+ " bfextu %0, %0, #16 \n\t"
+ " add.4 %0, d15, %0 \n\t"
+ : "=&d" (sum)
+ : "0"(sum)
+ : "d15"
+ );
+ return (__force __sum16)~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ asm volatile (
+ " add.4 %0, %2, %0 \n\t"
+ " addc %0, %3, %0 \n\t"
+ " addc %0, %4, %0 \n\t"
+ " addc %0, %5, %0 \n\t"
+ " addc %0, #0, %0 \n\t"
+ : "=&d" (sum)
+ : "0"(sum), "r" (saddr), "r" (daddr), "r" (len), "r"(proto)
+ );
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ asm volatile (
+ " add.4 %0, 0(%2), %0 \n\t"
+ " addc %0, 4(%2), %0 \n\t"
+ " addc %0, 8(%2), %0 \n\t"
+ " addc %0, 12(%2), %0 \n\t"
+ " addc %0, 0(%3), %0 \n\t"
+ " addc %0, 4(%3), %0 \n\t"
+ " addc %0, 8(%3), %0 \n\t"
+ " addc %0, 12(%3), %0 \n\t"
+ " addc %0, %4, %0 \n\t"
+ " addc %0, #0, %0 \n\t"
+ : "=&d" (sum)
+ : "0" (sum), "a" (saddr), "a" (daddr), "d" (len + proto)
+ );
+ return csum_fold(sum);
+}
+
+#endif /* _ASM_UBICOM32_CHECKSUM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/cpu.h
@@ -0,0 +1,45 @@
+/*
+ * arch/ubicom32/include/asm/cpu.h
+ * CPU definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CPU_H
+#define _ASM_UBICOM32_CPU_H
+
+#include <linux/percpu.h>
+
+struct cpuinfo_ubicom32 {
+ unsigned long tid; /* Hardware thread number */
+
+#ifdef CONFIG_SMP
+ volatile unsigned long ipi_pending; /* Bit map of operations to execute */
+ unsigned long ipi_count; /* Number of IPI(s) taken on this cpu */
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
+
+#endif /* _ASM_UBICOM32_CPU_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/cputime.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/cputime.h
+ * Generic cputime.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CPUTIME_H
+#define _ASM_UBICOM32_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_UBICOM32_CPUTIME_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/current.h
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/current.h
+ * Definition of get_current() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_CURRENT_H
+#define _ASM_UBICOM32_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+ return(current_thread_info()->task);
+}
+
+#define current get_current()
+
+#endif /* _ASM_UBICOM32_CURRENT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/delay.h
@@ -0,0 +1,75 @@
+/*
+ * arch/ubicom32/include/asm/delay.h
+ * Definition of delay routines for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DELAY_H
+#define _ASM_UBICOM32_DELAY_H
+
+#include <asm/param.h>
+#include <asm/ip5000.h>
+
+static inline void __delay(unsigned long loops)
+{
+ if (loops == 0) {
+ return;
+ }
+
+ asm volatile (
+ "1: add.4 %0, #-1, %0 \n\t"
+ " jmpne.t 1b \n\t"
+ : "+d" (loops)
+ );
+}
+
+/*
+ * Ubicom32 processor uses fixed 12MHz external OSC.
+ * So we use that as reference to count 12 cycles/us
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_UBICOM32_V4) || defined(CONFIG_UBICOM32_V3)
+ asm volatile (
+ " add.4 d15, 0(%0), %1 \n\t"
+ " sub.4 #0, 0(%0), d15 \n\t"
+ " jmpmi.w.f .-4 \n\t"
+ :
+ : "a"(TIMER_BASE + TIMER_MPTVAL), "d"(usecs * (12000000/1000000))
+ : "d15"
+ );
+#else
+ BUG();
+#endif
+}
+
+/*
+ * Moved the udelay() function into library code, no longer inlined.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* _ASM_UBICOM32_DELAY_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/device.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/device.h
+ * Generic device.h for Ubicom32 architecture.
+ *
+ * Used for arch specific extensions to struct device
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DEVICE_H
+#define _ASM_UBICOM32_DEVICE_H
+
+#include <asm-generic/device.h>
+
+#endif /* _ASM_UBICOM32_DEVICE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/devtree.h
@@ -0,0 +1,52 @@
+/*
+ * arch/ubicom32/include/asm/devtree.h
+ * Device Tree Header File (Shared between ultra and the Host OS)
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_DEVTREE_H
+#define _ASM_UBICOM32_DEVTREE_H
+
+#define DEVTREE_MAX_NAME 32
+#define DEVTREE_IRQ_NONE 0xff
+#define DEVTREE_IRQ_DONTCARE 0xff
+#define DEVTREE_NODE_MAGIC 0x10203040
+
+struct devtree_node {
+ struct devtree_node *next;
+ unsigned char sendirq;
+ unsigned char recvirq;
+ char name[DEVTREE_MAX_NAME];
+ unsigned int magic;
+};
+
+extern struct devtree_node *devtree;
+extern struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq);
+extern struct devtree_node *devtree_find_node(const char *str);
+extern struct devtree_node *devtree_find_next(struct devtree_node **cur);
+extern int devtree_irq(struct devtree_node *dn, unsigned char *sendirq, unsigned char *recvirq);
+extern void devtree_print(void);
+
+#endif /* _ASM_UBICOM32_DEVTREE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/div64.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/div64.h
+ * Generic div64.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DIV64_H
+#define _ASM_UBICOM32_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* _ASM_UBICOM32_DIV64_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/dma.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/dma.h
+ * DMA definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DMA_H
+#define _ASM_UBICOM32_DMA_H
+
+/* Nothing so far */
+#define MAX_DMA_ADDRESS 0x00 /* This is quite suspicious */
+
+#endif /* _ASM_UBICOM32_DMA_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/dma-mapping.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/dma-mapping.h
+ * Generic dma-mapping.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_DMA_MAPPING_H
+#define _ASM_UBICOM32_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <asm-generic/dma-mapping.h>
+
+#endif /* _ASM_UBICOM32_DMA_MAPPING_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/elf.h
@@ -0,0 +1,167 @@
+/*
+ * arch/ubicom32/include/asm/elf.h
+ * Definitions for elf executable format for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ELF_H
+#define _ASM_UBICOM32_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * Processor specific flags for the ELF header e_flags field.
+ */
+#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */
+#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */
+#define EF_UBICOM32_PIC 0x80000000 /* -fpic */
+#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */
+
+/*
+ * Ubicom32 ELF relocation types
+ */
+#define R_UBICOM32_NONE 0
+#define R_UBICOM32_16 1
+#define R_UBICOM32_32 2
+#define R_UBICOM32_LO16 3
+#define R_UBICOM32_HI16 4
+#define R_UBICOM32_21_PCREL 5
+#define R_UBICOM32_24_PCREL 6
+#define R_UBICOM32_HI24 7
+#define R_UBICOM32_LO7_S 8
+#define R_UBICOM32_LO7_2_S 9
+#define R_UBICOM32_LO7_4_S 10
+#define R_UBICOM32_LO7_D 11
+#define R_UBICOM32_LO7_2_D 12
+#define R_UBICOM32_LO7_4_D 13
+#define R_UBICOM32_32_HARVARD 14
+#define R_UBICOM32_LO7_CALLI 15
+#define R_UBICOM32_LO16_CALLI 16
+#define R_UBICOM32_GOT_HI24 17
+#define R_UBICOM32_GOT_LO7_S 18
+#define R_UBICOM32_GOT_LO7_2_S 19
+#define R_UBICOM32_GOT_LO7_4_S 20
+#define R_UBICOM32_GOT_LO7_D 21
+#define R_UBICOM32_GOT_LO7_2_D 22
+#define R_UBICOM32_GOT_LO7_4_D 23
+#define R_UBICOM32_FUNCDESC_GOT_HI24 24
+#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25
+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26
+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27
+#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28
+#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29
+#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30
+#define R_UBICOM32_GOT_LO7_CALLI 31
+#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32
+#define R_UBICOM32_FUNCDESC_VALUE 33
+#define R_UBICOM32_FUNCDESC 34
+#define R_UBICOM32_GOTOFFSET_LO 35
+#define R_UBICOM32_GOTOFFSET_HI 36
+#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37
+#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38
+#define R_UBICOM32_GNU_VTINHERIT 200
+#define R_UBICOM32_GNU_VTENTRY 201
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_ubicom32fp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_UBICOM32)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_UBICOM32_FDPIC)
+
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_UBICOM32_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_UBICOM32
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+ passed in %a1. Although my copy of the ABI has no such statement, it
+ is actually used on ASV. */
+#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, \
+ _dynamic_addr) \
+ do { \
+ _regs->dn[1] = _exec_map_addr; \
+ _regs->dn[2] = _interp_map_addr; \
+ _regs->dn[3] = _dynamic_addr; \
+ _regs->an[1] = 0; /* dl_fini will be set by ldso */ \
+ } while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+#ifdef __KERNEL__
+#ifdef CONFIG_UBICOM32_V4
+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V4)
+#elif defined CONFIG_UBICOM32_V3
+#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V3)
+#else
+#error Unknown/Unsupported ubicom32 architecture.
+#endif
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+/*
+ * For Ubicom32, the elf_gregset_t and struct pt_regs are the same size
+ * data structure so a copy is performed instead of providing the
+ * ELF_CORE_COPY_REGS macro.
+ */
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* _ASM_UBICOM32_ELF_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/emergency-restart.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/emergency-restart.h
+ * Generic emergency-restart.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_EMERGENCY_RESTART_H
+#define _ASM_UBICOM32_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_UBICOM32_EMERGENCY_RESTART_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/entry.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/entry.h
+ * Entry register/stack definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ENTRY_H
+#define _ASM_UBICOM32_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#endif /* _ASM_UBICOM32_ENTRY_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/errno.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/errno.h
+ * Generic errno.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_ERRNO_H
+#define _ASM_UBICOM32_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_UBICOM32_ERRNO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/fb.h
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/fb.h
+ * Definition of fb_is_primary_device() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FB_H
+#define _ASM_UBICOM32_FB_H
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_UBICOM32_FB_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/fcntl.h
@@ -0,0 +1,38 @@
+/*
+ * arch/ubicom32/include/asm/fcntl.h
+ * File control bit definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FCNTL_H
+#define _ASM_UBICOM32_FCNTL_H
+
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_UBICOM32_FCNTL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/flat.h
@@ -0,0 +1,73 @@
+/*
+ * arch/ubicom32/include/asm/flat.h
+ * Definitions to support flat-format executables.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_FLAT_H
+#define _ASM_UBICOM32_FLAT_H
+
+#define ARCH_FLAT_ALIGN 0x80
+#define ARCH_FLAT_ALIGN_TEXT 1
+
+#define R_UBICOM32_32 2
+#define R_UBICOM32_HI24 7
+#define R_UBICOM32_LO7_S 8
+#define R_UBICOM32_LO7_2_S 9
+#define R_UBICOM32_LO7_4_S 10
+#define R_UBICOM32_LO7_D 11
+#define R_UBICOM32_LO7_2_D 12
+#define R_UBICOM32_LO7_4_D 13
+#define R_UBICOM32_LO7_CALLI 15
+#define R_UBICOM32_LO16_CALLI 16
+
+extern void ubicom32_flat_put_addr_at_rp(unsigned long *rp, u32_t val, u32_t rval, unsigned long *p);
+extern unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, u32_t relval, u32_t flags, unsigned long *p);
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) (flags)
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p) (ubicom32_flat_get_addr_from_rp(rp, relval,flags, p))
+#define flat_put_addr_at_rp(rp, val, relval) do {ubicom32_flat_put_addr_at_rp(rp, val, relval, &persistent);} while(0)
+#define flat_get_relocate_addr(rel) ((persistent) ? (persistent & 0x07ffffff) : (rel & 0x07ffffff))
+
+static inline int flat_set_persistent(unsigned int relval, unsigned long *p)
+{
+ if (*p) {
+ return 0;
+ } else {
+ if ((relval >> 27) != R_UBICOM32_32) {
+ /*
+ * Something other than UBICOM32_32. The next entry has the relocation.
+ */
+ *p = relval;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+#endif /* _ASM_UBICOM32_FLAT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/fpu.h
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/fpu.h
+ * Floating point state definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FPU_H
+#define _ASM_UBICOM32_FPU_H
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+/* No FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+
+#endif /* _ASM_UBICOM32_FPU_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/futex.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/futex.h
+ * Generic futex.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_FUTEX_H
+#define _ASM_UBICOM32_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* _ASM_UBICOM32_FUTEX_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/gpio.h
@@ -0,0 +1,451 @@
+/*
+ * arch/ubicom32/include/asm/gpio.h
+ * Definitions for GPIO operations on Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_GPIO_H
+#define _ASM_UBICOM32_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+#include <asm/ip5000.h>
+
+#define ARCH_NR_GPIOS 512
+#define MAX_UBICOM_ONCHIP_GPIO (9 * 32)
+
+/*
+ * Macros for manipulating GPIO numbers
+ */
+#define gpio_bit(gn) (1 << (gn & 0x1f))
+#define gpio_bank(gn) (gn >> 5)
+
+#define gpio_pin_index(gn) (gn & 0x1f)
+#define gpio_port_index(gn) (gn >> 5)
+
+#define GPIO_RA_0 ((32 * 0) + 0)
+#define GPIO_RA_1 ((32 * 0) + 1)
+#define GPIO_RA_2 ((32 * 0) + 2)
+#define GPIO_RA_3 ((32 * 0) + 3)
+#define GPIO_RA_4 ((32 * 0) + 4)
+#define GPIO_RA_5 ((32 * 0) + 5)
+#define GPIO_RA_6 ((32 * 0) + 6)
+#define GPIO_RA_7 ((32 * 0) + 7)
+
+#define GPIO_RB_0 ((32 * 1) + 0)
+#define GPIO_RB_1 ((32 * 1) + 1)
+#define GPIO_RB_2 ((32 * 1) + 2)
+#define GPIO_RB_3 ((32 * 1) + 3)
+#define GPIO_RB_4 ((32 * 1) + 4)
+#define GPIO_RB_5 ((32 * 1) + 5)
+#define GPIO_RB_6 ((32 * 1) + 6)
+#define GPIO_RB_7 ((32 * 1) + 7)
+#define GPIO_RB_8 ((32 * 1) + 8)
+#define GPIO_RB_9 ((32 * 1) + 9)
+#define GPIO_RB_10 ((32 * 1) + 10)
+#define GPIO_RB_11 ((32 * 1) + 11)
+#define GPIO_RB_12 ((32 * 1) + 12)
+#define GPIO_RB_13 ((32 * 1) + 13)
+#define GPIO_RB_14 ((32 * 1) + 14)
+#define GPIO_RB_15 ((32 * 1) + 15)
+#define GPIO_RB_16 ((32 * 1) + 16)
+#define GPIO_RB_17 ((32 * 1) + 17)
+#define GPIO_RB_18 ((32 * 1) + 18)
+#define GPIO_RB_19 ((32 * 1) + 19)
+
+#define GPIO_RC_0 ((32 * 2) + 0)
+#define GPIO_RC_1 ((32 * 2) + 1)
+#define GPIO_RC_2 ((32 * 2) + 2)
+#define GPIO_RC_3 ((32 * 2) + 3)
+#define GPIO_RC_4 ((32 * 2) + 4)
+#define GPIO_RC_5 ((32 * 2) + 5)
+#define GPIO_RC_6 ((32 * 2) + 6)
+#define GPIO_RC_7 ((32 * 2) + 7)
+#define GPIO_RC_8 ((32 * 2) + 8)
+#define GPIO_RC_9 ((32 * 2) + 9)
+#define GPIO_RC_10 ((32 * 2) + 10)
+#define GPIO_RC_11 ((32 * 2) + 11)
+#define GPIO_RC_12 ((32 * 2) + 12)
+#define GPIO_RC_13 ((32 * 2) + 13)
+#define GPIO_RC_14 ((32 * 2) + 14)
+#define GPIO_RC_15 ((32 * 2) + 15)
+#define GPIO_RC_16 ((32 * 2) + 16)
+#define GPIO_RC_17 ((32 * 2) + 17)
+#define GPIO_RC_18 ((32 * 2) + 18)
+#define GPIO_RC_19 ((32 * 2) + 19)
+#define GPIO_RC_20 ((32 * 2) + 20)
+#define GPIO_RC_21 ((32 * 2) + 21)
+#define GPIO_RC_22 ((32 * 2) + 22)
+#define GPIO_RC_23 ((32 * 2) + 23)
+#define GPIO_RC_24 ((32 * 2) + 24)
+#define GPIO_RC_25 ((32 * 2) + 25)
+#define GPIO_RC_26 ((32 * 2) + 26)
+#define GPIO_RC_27 ((32 * 2) + 27)
+#define GPIO_RC_28 ((32 * 2) + 28)
+#define GPIO_RC_29 ((32 * 2) + 29)
+#define GPIO_RC_30 ((32 * 2) + 30)
+#define GPIO_RC_31 ((32 * 2) + 31)
+
+#define GPIO_RD_0 ((32 * 3) + 0)
+#define GPIO_RD_1 ((32 * 3) + 1)
+#define GPIO_RD_2 ((32 * 3) + 2)
+#define GPIO_RD_3 ((32 * 3) + 3)
+#define GPIO_RD_4 ((32 * 3) + 4)
+#define GPIO_RD_5 ((32 * 3) + 5)
+#define GPIO_RD_6 ((32 * 3) + 6)
+#define GPIO_RD_7 ((32 * 3) + 7)
+#define GPIO_RD_8 ((32 * 3) + 8)
+#define GPIO_RD_9 ((32 * 3) + 9)
+#define GPIO_RD_10 ((32 * 3) + 10)
+#define GPIO_RD_11 ((32 * 3) + 11)
+
+#define GPIO_RE_0 ((32 * 4) + 0)
+#define GPIO_RE_1 ((32 * 4) + 1)
+#define GPIO_RE_2 ((32 * 4) + 2)
+#define GPIO_RE_3 ((32 * 4) + 3)
+#define GPIO_RE_4 ((32 * 4) + 4)
+#define GPIO_RE_5 ((32 * 4) + 5)
+#define GPIO_RE_6 ((32 * 4) + 6)
+#define GPIO_RE_7 ((32 * 4) + 7)
+
+#define GPIO_RF_0 ((32 * 5) + 0)
+#define GPIO_RF_1 ((32 * 5) + 1)
+#define GPIO_RF_2 ((32 * 5) + 2)
+#define GPIO_RF_3 ((32 * 5) + 3)
+#define GPIO_RF_4 ((32 * 5) + 4)
+#define GPIO_RF_5 ((32 * 5) + 5)
+#define GPIO_RF_6 ((32 * 5) + 6)
+#define GPIO_RF_7 ((32 * 5) + 7)
+#define GPIO_RF_8 ((32 * 5) + 8)
+#define GPIO_RF_9 ((32 * 5) + 9)
+#define GPIO_RF_10 ((32 * 5) + 10)
+#define GPIO_RF_11 ((32 * 5) + 11)
+#define GPIO_RF_12 ((32 * 5) + 12)
+#define GPIO_RF_13 ((32 * 5) + 13)
+#define GPIO_RF_14 ((32 * 5) + 14)
+#define GPIO_RF_15 ((32 * 5) + 15)
+
+#define GPIO_RG_0 ((32 * 6) + 0)
+#define GPIO_RG_1 ((32 * 6) + 1)
+#define GPIO_RG_2 ((32 * 6) + 2)
+#define GPIO_RG_3 ((32 * 6) + 3)
+#define GPIO_RG_4 ((32 * 6) + 4)
+#define GPIO_RG_5 ((32 * 6) + 5)
+#define GPIO_RG_6 ((32 * 6) + 6)
+#define GPIO_RG_7 ((32 * 6) + 7)
+#define GPIO_RG_8 ((32 * 6) + 8)
+#define GPIO_RG_9 ((32 * 6) + 9)
+#define GPIO_RG_10 ((32 * 6) + 10)
+#define GPIO_RG_11 ((32 * 6) + 11)
+#define GPIO_RG_12 ((32 * 6) + 12)
+#define GPIO_RG_13 ((32 * 6) + 13)
+#define GPIO_RG_14 ((32 * 6) + 14)
+#define GPIO_RG_15 ((32 * 6) + 15)
+#define GPIO_RG_16 ((32 * 6) + 16)
+#define GPIO_RG_17 ((32 * 6) + 17)
+#define GPIO_RG_18 ((32 * 6) + 18)
+#define GPIO_RG_19 ((32 * 6) + 19)
+#define GPIO_RG_20 ((32 * 6) + 20)
+#define GPIO_RG_21 ((32 * 6) + 21)
+#define GPIO_RG_22 ((32 * 6) + 22)
+#define GPIO_RG_23 ((32 * 6) + 23)
+#define GPIO_RG_24 ((32 * 6) + 24)
+#define GPIO_RG_25 ((32 * 6) + 25)
+#define GPIO_RG_26 ((32 * 6) + 26)
+#define GPIO_RG_27 ((32 * 6) + 27)
+#define GPIO_RG_28 ((32 * 6) + 28)
+#define GPIO_RG_29 ((32 * 6) + 29)
+#define GPIO_RG_30 ((32 * 6) + 30)
+#define GPIO_RG_31 ((32 * 6) + 31)
+
+#define GPIO_RH_0 ((32 * 7) + 0)
+#define GPIO_RH_1 ((32 * 7) + 1)
+#define GPIO_RH_2 ((32 * 7) + 2)
+#define GPIO_RH_3 ((32 * 7) + 3)
+#define GPIO_RH_4 ((32 * 7) + 4)
+#define GPIO_RH_5 ((32 * 7) + 5)
+#define GPIO_RH_6 ((32 * 7) + 6)
+#define GPIO_RH_7 ((32 * 7) + 7)
+#define GPIO_RH_8 ((32 * 7) + 8)
+#define GPIO_RH_9 ((32 * 7) + 9)
+
+#define GPIO_RI_0 ((32 * 8) + 0)
+#define GPIO_RI_1 ((32 * 8) + 1)
+#define GPIO_RI_2 ((32 * 8) + 2)
+#define GPIO_RI_3 ((32 * 8) + 3)
+#define GPIO_RI_4 ((32 * 8) + 4)
+#define GPIO_RI_5 ((32 * 8) + 5)
+#define GPIO_RI_6 ((32 * 8) + 6)
+#define GPIO_RI_7 ((32 * 8) + 7)
+#define GPIO_RI_8 ((32 * 8) + 8)
+#define GPIO_RI_9 ((32 * 8) + 9)
+#define GPIO_RI_10 ((32 * 8) + 10)
+#define GPIO_RI_11 ((32 * 8) + 11)
+#define GPIO_RI_12 ((32 * 8) + 12)
+#define GPIO_RI_13 ((32 * 8) + 13)
+
+/*
+ * The following section defines extra GPIO available to some boards.
+ * These GPIO are generally external to the processor (i.e. SPI/I2C
+ * expander chips).
+ *
+ * Note that these defines show all possible GPIO available, however,
+ * depending on the actual board configuration, some GPIO are not
+ * available for use.
+ */
+#ifdef CONFIG_IP7500MEDIA
+/*
+ * U15
+ */
+#define IP7500MEDIA_U15_BASE (32 * 10)
+#define IP7500MEDIA_IO0 (IP7500MEDIA_U15_BASE + 0)
+#define IP7500MEDIA_IO1 (IP7500MEDIA_U15_BASE + 1)
+#define IP7500MEDIA_IO2 (IP7500MEDIA_U15_BASE + 2)
+#define IP7500MEDIA_IO3 (IP7500MEDIA_U15_BASE + 3)
+#define IP7500MEDIA_IO4 (IP7500MEDIA_U15_BASE + 4)
+#define IP7500MEDIA_IO5 (IP7500MEDIA_U15_BASE + 5)
+#define IP7500MEDIA_IO6 (IP7500MEDIA_U15_BASE + 6)
+#define IP7500MEDIA_IO7 (IP7500MEDIA_U15_BASE + 7)
+
+/*
+ * U16
+ */
+#define IP7500MEDIA_U16_BASE (32 * 11)
+#define IP7500MEDIA_IO8 (IP7500MEDIA_U16_BASE + 0)
+#define IP7500MEDIA_IO9 (IP7500MEDIA_U16_BASE + 1)
+#define IP7500MEDIA_IO10 (IP7500MEDIA_U16_BASE + 2)
+#define IP7500MEDIA_IO11 (IP7500MEDIA_U16_BASE + 3)
+#define IP7500MEDIA_IO12 (IP7500MEDIA_U16_BASE + 4)
+#define IP7500MEDIA_IO13 (IP7500MEDIA_U16_BASE + 5)
+#define IP7500MEDIA_IO14 (IP7500MEDIA_U16_BASE + 6)
+#define IP7500MEDIA_IO15 (IP7500MEDIA_U16_BASE + 7)
+
+/*
+ * U17
+ */
+#define IP7500MEDIA_U17_BASE (32 * 12)
+#define IP7500MEDIA_IO16 (IP7500MEDIA_U17_BASE + 0)
+#define IP7500MEDIA_IO17 (IP7500MEDIA_U17_BASE + 1)
+#define IP7500MEDIA_IO18 (IP7500MEDIA_U17_BASE + 2)
+#define IP7500MEDIA_IO19 (IP7500MEDIA_U17_BASE + 3)
+#define IP7500MEDIA_IO20 (IP7500MEDIA_U17_BASE + 4)
+#define IP7500MEDIA_IO21 (IP7500MEDIA_U17_BASE + 5)
+#define IP7500MEDIA_IO22 (IP7500MEDIA_U17_BASE + 6)
+#define IP7500MEDIA_IO23 (IP7500MEDIA_U17_BASE + 7)
+
+/*
+ * U18
+ */
+#define IP7500MEDIA_U18_BASE (32 * 13)
+#define IP7500MEDIA_IO24 (IP7500MEDIA_U18_BASE + 0)
+#define IP7500MEDIA_IO25 (IP7500MEDIA_U18_BASE + 1)
+#define IP7500MEDIA_IO26 (IP7500MEDIA_U18_BASE + 2)
+#define IP7500MEDIA_IO27 (IP7500MEDIA_U18_BASE + 3)
+#define IP7500MEDIA_IO28 (IP7500MEDIA_U18_BASE + 4)
+#define IP7500MEDIA_IO29 (IP7500MEDIA_U18_BASE + 5)
+#define IP7500MEDIA_IO30 (IP7500MEDIA_U18_BASE + 6)
+#define IP7500MEDIA_IO31 (IP7500MEDIA_U18_BASE + 7)
+#endif
+
+#ifdef CONFIG_IP7145DPF
+/*
+ * U48
+ */
+#define IP7145DPF_U48_BASE (32 * 10)
+#define IP7145DPF_IO0 (IP7145DPF_U48_BASE + 0)
+#define IP7145DPF_IO1 (IP7145DPF_U48_BASE + 1)
+#define IP7145DPF_IO2 (IP7145DPF_U48_BASE + 2)
+#define IP7145DPF_IO3 (IP7145DPF_U48_BASE + 3)
+#define IP7145DPF_IO4 (IP7145DPF_U48_BASE + 4)
+#define IP7145DPF_IO5 (IP7145DPF_U48_BASE + 5)
+#define IP7145DPF_IO6 (IP7145DPF_U48_BASE + 6)
+#define IP7145DPF_IO7 (IP7145DPF_U48_BASE + 7)
+
+/*
+ * U72
+ */
+#define IP7145DPF_U72_BASE (32 * 11)
+#define IP7145DPF_IOB0 (IP7145DPF_U72_BASE + 0)
+#define IP7145DPF_IOB1 (IP7145DPF_U72_BASE + 1)
+#define IP7145DPF_IOB2 (IP7145DPF_U72_BASE + 2)
+#define IP7145DPF_IOB3 (IP7145DPF_U72_BASE + 3)
+#define IP7145DPF_IOB4 (IP7145DPF_U72_BASE + 4)
+#define IP7145DPF_IOB5 (IP7145DPF_U72_BASE + 5)
+#define IP7145DPF_IOB6 (IP7145DPF_U72_BASE + 6)
+#define IP7145DPF_IOB7 (IP7145DPF_U72_BASE + 7)
+#endif
+
+#include <asm-generic/gpio.h>
+
+/*
+ * The following macros bypass gpiolib to generate direct references
+ * to the port registers. These assume, minimally, that either
+ * gpio_direction_input() or gpio_direction_output() have already been
+ * called to setup the pin direction and to enable the pin function to
+ * be gpio. These macros generate the hardware port address based on
+ * the assumption that all ports are 32 bits wide (even though we know
+ * they are not). This is so we can efficiently turn pin numbers into
+ * port addresses without a lookup.
+ *
+ * These operations must be done in one instruction to prevent clobbering
+ * other thread's accesses to the same port.
+ */
+#define UBICOM32_GPIO_ENABLE(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_DISABLE(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_INPUT(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_OUTPUT(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_TOGGLE(pin) \
+ do { \
+ asm volatile ("xor.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_HIGH(pin) \
+ do { \
+ asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN_LOW(pin) \
+ do { \
+ asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \
+ : \
+ : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \
+ [mask] "d" (~gpio_bit(pin)) \
+ : "cc", "memory" \
+ ); \
+ } while (0);
+
+#define UBICOM32_GPIO_SET_PIN(pin, val) \
+ if ( val ) { \
+ UBICOM32_GPIO_SET_PIN_HIGH(pin); \
+ } else { \
+ UBICOM32_GPIO_SET_PIN_LOW(pin); \
+ }
+
+#define UBICOM32_GPIO_GET_PIN(pin) \
+ (0 != (UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_in \
+ & gpio_bit(pin)))
+
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
+ return UBICOM32_GPIO_GET_PIN(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio <= MAX_UBICOM_ONCHIP_GPIO)
+ {
+ UBICOM32_GPIO_SET_PIN(gpio, value);
+ }
+ else
+ {
+ __gpio_set_value(gpio, value);
+ }
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+#if defined(IP5000) || defined(IP5000_REV2)
+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
+ return 25;
+ else
+ return -ENXIO;
+
+#elif defined(IP7000) || defined(IP7000_REV2)
+ if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6))
+ return 44 + (gpio - GPIO_RA_4);
+ else
+ return -ENXIO;
+
+#else
+ return -ENXIO;
+
+#endif
+}
+
+static inline int irq_to_gpio(unsigned gpio)
+{
+ return -ENXIO;
+}
+
+extern struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio);
+
+extern int __init ubi_gpio_init(void);
+
+#endif /* _ASM_UBICOM32_GPIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/hardirq.h
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/hardirq.h
+ * Definition of ack_bad_irq() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_HARDIRQ_H
+#define _ASM_UBICOM32_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU. For Ubicom32, we have 64 IRQ sources.
+ */
+#define HARDIRQ_BITS 6
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_UBICOM32_HARDIRQ_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/hw_irq.h
@@ -0,0 +1,31 @@
+/*
+ * arch/ubicom32/include/asm/hw_irq.h
+ * Ubicom32 architecture APIC support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_HW_IRQ_H
+#define _ASM_UBICOM32_HW_IRQ_H
+
+#endif /* _ASM_UBICOM32_HW_IRQ_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ioctl.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/ioctl.h
+ * Generic ioctl.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IOCTL_H
+#define _ASM_UBICOM32_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_UBICOM32_IOCTL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ioctls.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ubicom32/include/asm/ioctls.h
+ * Definitions of ioctls for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IOCTLS_H
+#define _ASM_UBICOM32_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_UBICOM32_IOCTLS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/io.h
@@ -0,0 +1,313 @@
+/*
+ * arch/ubicom32/include/asm/io.h
+ * I/O memory accessor functions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IO_H
+#define _ASM_UBICOM32_IO_H
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+ return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#ifndef CONFIG_PCI
+#define readb(addr) \
+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+#else /*CONFIG_PCI */
+
+#define PCI_CPU_REG_BASE (0x00000000UL) /* taking lower 2GB space */
+#define PCI_DEV_REG_BASE (0x80000000UL)
+
+#if PCI_CPU_REG_BASE > PCI_DEV_REG_BASE
+#define IS_PCI_ADDRESS(x) (((unsigned int)(x)&(PCI_CPU_REG_BASE)) == 0)
+#else
+#define IS_PCI_ADDRESS(x) ((unsigned int)(x)&(PCI_DEV_REG_BASE))
+#endif
+
+extern unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr);
+extern unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr);
+extern unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr);
+extern void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr);
+extern void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr);
+extern void ubi32_pci_write_u8(unsigned char val, const volatile void __iomem *addr);
+
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u8(addr);
+ else
+ return (unsigned char)(*(volatile unsigned char *)addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u16(addr);
+ else
+ return (unsigned short)(*(volatile unsigned short *)addr);
+}
+
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u32(addr);
+ else
+ return (unsigned int)(*(volatile unsigned int *)addr);
+}
+
+static inline void writel(unsigned int val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u32(val, addr);
+ else
+ *(volatile unsigned int *)addr = val;
+}
+
+static inline void writew(unsigned short val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u16(val, addr);
+ else
+ *(volatile unsigned short *)addr = val;
+}
+
+static inline void writeb(unsigned char val, volatile void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u8(val, addr);
+ else
+ *(volatile unsigned char *)addr = val;
+}
+#endif
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap = (volatile unsigned char *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+ while (len--)
+ *bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+ while (len--)
+ *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned int *ap = (volatile unsigned int *) addr;
+ unsigned int *bp = (unsigned int *) buf;
+ while (len--)
+ *bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+#ifndef CONFIG_PCI
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+#else
+extern void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len);
+extern void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len);
+extern void memset_io(volatile void __iomem *addr, int val, size_t count);
+#endif
+
+#define inb(addr) readb(addr)
+#define inw(addr) readw(addr)
+#define inl(addr) readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#ifndef CONFIG_PCI
+#define ioread8_rep(a,d,c) insb(a,d,c)
+#define ioread16_rep(a,d,c) insw(a,d,c)
+#define ioread32_rep(a,d,c) insl(a,d,c)
+#define iowrite8_rep(a,s,c) outsb(a,s,c)
+#define iowrite16_rep(a,s,c) outsw(a,s,c)
+#define iowrite32_rep(a,s,c) outsl(a,s,c)
+#else
+extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
+#endif
+
+
+#ifndef CONFIG_PCI
+#define ioread8(X) readb(X)
+#define ioread16(X) readw(X)
+#define ioread32(X) readl(X)
+#define iowrite8(val,X) writeb(val,X)
+#define iowrite16(val,X) writew(val,X)
+#define iowrite32(val,X) writel(val,X)
+#else /*CONFIG_PCI */
+extern unsigned char ioread8(void __iomem *addr);
+extern unsigned short ioread16(void __iomem *addr);
+extern unsigned int ioread32(void __iomem *addr);
+extern void iowrite8(unsigned char val, void __iomem *addr);
+extern void iowrite16(unsigned short val, void __iomem *addr);
+extern void iowrite32(unsigned int val, void __iomem *addr);
+#endif /* CONFIG_PCI */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+#define ioport_map(port, nr) ((void __iomem*)(port))
+#define ioport_unmap(addr)
+
+
+/* Pages to physical address... */
+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_IO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ip5000-asm.h
@@ -0,0 +1,156 @@
+/*
+ * arch/ubicom32/include/asm/ip5000-asm.h
+ * Instruction macros for the IP5000.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_IP5000_ASM_H
+#define _ASM_UBICOM32_IP5000_ASM_H
+
+#if !defined(__LINKER__)
+
+#if defined(__ASSEMBLY__)
+.macro cycles quant
+.if (\quant) == 1
+ nop
+.else
+.if (((\quant) + 3) / 8) > 0
+.rept (((\quant) + 3) / 8)
+ jmpt.f .+4
+.endr
+.endif
+.if ((((\quant) + 3) % 8) / 4) > 0
+ jmpt.t .+4
+.endif
+.endif
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro cycles quant \n\
+.if (\\quant) == 1 \n\
+ nop \n\
+.else \n\
+.if (((\\quant) + 3) / 8) > 0 \n\
+.rept (((\\quant) + 3) / 8) \n\
+ jmpt.f .+4 \n\
+.endr \n\
+.endif \n\
+.if ((((\\quant) + 3) % 8) / 4) > 0 \n\
+ jmpt.t .+4 \n\
+.endif \n\
+.endif \n\
+.endm \n\
+");
+#endif
+
+
+#if defined(__ASSEMBLY__)
+.macro pipe_flush cyc
+ cycles 11 - (\cyc)
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro pipe_flush cyc \n\
+ cycles 11 - (\\cyc) \n\
+.endm \n\
+");
+
+#endif
+
+#if defined(__ASSEMBLY__)
+.macro setcsr_flush cyc
+ cycles 5 - (\cyc)
+.endm
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro setcsr_flush cyc \n\
+ cycles 5 - (\\cyc) \n\
+.endm \n\
+");
+#endif
+
+/*
+ * Macros for prefetch (using miss-aligned memory write)
+ */
+#if defined(__ASSEMBLY__)
+
+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length
+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
+ bset \Ascratch, \Aaddress, #0 ; force a miss-aligned address
+ jmpt.t .+4 ; delay for both address setup and trap disable
+ move.4 (\Ascratch), #0
+ .if (\length > 32)
+ move.4 32(\Ascratch), #0
+ .endif
+ .if (\length > 64)
+ move.4 64(\Ascratch), #0
+ .endif
+ .if (\length > 96)
+ move.4 96(\Ascratch), #0
+ .endif
+ .if (\length > 128)
+ invalid_instruction ; maximum pre-fetch size is 4 cache lines
+ .endif
+ bset MT_TRAP_EN, MT_TRAP_EN, #(\thread_num)
+.endm
+
+#else
+/*
+ * Same macro as above just in C inline asm
+ */
+asm (" \n\
+.macro pre_fetch_macro thread_num, Ascratch, Aaddress length \n\
+ bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) \n\
+ bset \\Ascratch, \\Aaddress, #0 ; force a miss-aligned address \n\
+ jmpt.t .+4 ; delay for both address setup and trap disable \n\
+ move.4 (\\Ascratch), #0 \n\
+ .if (\\length > 32) \n\
+ move.4 32(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 64) \n\
+ move.4 64(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 96) \n\
+ move.4 96(\\Ascratch), #0 \n\
+ .endif \n\
+ .if (\\length > 128) \n\
+ invalid_instruction ; maximum pre-fetch size is 4 cache lines \n\
+ .endif \n\
+ bset MT_TRAP_EN, MT_TRAP_EN, #(\\thread_num) \n\
+.endm \n\
+");
+#endif
+
+#endif /* !defined(__LINKER__) */
+#endif /* defined _ASM_UBICOM32_IP5000_ASM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ip5000.h
@@ -0,0 +1,860 @@
+/*
+ * arch/ubicom32/include/asm/ip5000.h
+ * Specific details for the Ubicom IP5000 processor.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_IP5000_H
+#define _ASM_UBICOM32_IP5000_H
+
+/*
+ * Inline assembly define
+ */
+#define S(arg) #arg
+#define D(arg) S(arg)
+
+/*
+ * Assembler include file
+ */
+#include <asm/ip5000-asm.h>
+
+/*
+ * Timing
+ */
+#define JMPT_PENALTY 3
+#define JMPF_PENALTY 7
+#define RET_PENALTY 7
+
+/*
+ * Threads
+ */
+#if defined(IP5000) || defined(IP5000_REV2)
+#define THREAD_COUNT 10
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define THREAD_COUNT 12
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+/*
+ * Arch
+ */
+#if defined(IP5000) || defined(IP5000_REV2)
+#define UBICOM32_ARCH_VERSION 3
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define UBICOM32_ARCH_VERSION 4
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+/*
+ * Memory Size
+ */
+#define OCM_SECTOR_SIZE 0x00008000 /* 32K */
+
+#if defined(IP5000) || defined(IP5000_REV2)
+#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy jump to/from SDRAM */
+#define OCMEND (OCMSTART + OCMSIZE)
+#define SDRAMSTART 0x40000000
+#define FLASHSTART 0x60000000
+
+/*
+ * Registers
+ */
+#define ROSR_INT (1 << 0)
+
+/* Interrupts */
+#define INT_CHIP(reg, bit) (((reg) << 5) | (bit))
+#define INT_REG(interrupt) (((interrupt) >> 5) * 4)
+#define INT_SET(interrupt) 0x0114 + INT_REG(interrupt)
+#define INT_CLR(interrupt) 0x0124 + INT_REG(interrupt)
+#define INT_STAT(interrupt) 0x0104 + INT_REG(interrupt)
+#define INT_MASK(interrupt) 0x00C0 + INT_REG(interrupt)
+#define INT_BIT(interrupt) ((interrupt) & 0x1F)
+#define INT_BIT_MASK(interrupt) (1 << INT_BIT(interrupt))
+
+/*
+ * The LOCK_INT and THREAD_INT are used to wake up corresponding thread. They are sharing
+ * the same set of SW interrupt resource.
+ *
+ * LOCK_INT(n): One SW INT per NRT thread that can participate lock operation.
+ * The threads that can participate lock are application threads and DSR thread.
+ * (Lock locks - numbers are hard-coded in lock.h)
+ * THREAD_INT(n): One SW INT per HRT thread for wake up trigger.
+ */
+#define LOCK_INT(thread) INT_CHIP(0, (thread))
+#define THREAD_INT(thread) INT_CHIP(0, (thread))
+
+/*
+ * The SYSTEM_INT and DSR_INT are sharing the same set of SW interrupt resource.
+ *
+ * SYSTEM_INT(n): One SW INT per NRT threads (application threads) as system queue interrupt,
+ * and for DSR as self-trigger interrupt.
+ * (The application threads include at least thread 0)
+ * DSR_INT(n): One SW INT per HRT thread to request DSR service.
+ */
+#define SYSTEM_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
+#define DSR_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread))
+
+/* GLOBAL_CTRL */
+#define GLOBAL_CTRL_TRAP_RST_EN (1 << 9)
+#define GLOBAL_CTRL_AERROR_RST_EN (1 << 8)
+#define GLOBAL_CTRL_MT_MIN_DELAY(x) ((x) << 3)
+#define GLOBAL_CTRL_HRT_BANK_SELECT (1 << 2)
+#define GLOBAL_CTRL_INT_EN (1 << 0)
+
+/*
+ * HRT Tables
+ */
+#define HRT_TABLE0_BASE 0x0800
+#define HRT_TABLE1_BASE 0x0900
+#define HRT_TABLE_SIZE 64
+
+/*
+ * Break Point Trap Register
+ */
+#define ASYNCERROR_INT INT_CHIP(0, 31)
+#define BREAKPOINT_INT INT_CHIP(1, 31)
+
+/*
+ * Port interrupts
+ * The non-existing FIFO INTs are mapped to INT2 for the ports.
+ */
+#define IO_PORT_PTR_TO_NUM(port) (((port) & 0x0000ffff) >> 12)
+#define RX_FIFO_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 26) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 24) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 27) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 16) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 21) : \
+ INT_CHIP(1, 15))))))))))
+#define TX_FIFO_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 24) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 27) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 28) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 17) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 22) : \
+ INT_CHIP(1, 15))))))))))
+#define PORT_OTHER_INT(port) \
+ ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 28) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 26) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 29) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 18) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \
+ ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 23) : \
+ INT_CHIP(1, 15))))))))))
+
+/*
+ * On Chip Peripherals Base.
+ */
+#define OCP_BASE 0x01000000
+#define OCP_GENERAL 0x000
+#define OCP_TIMERS 0x100
+#define OCP_TRNG 0x200 /* True Random Number Generator Control Reigsters */
+#define OCP_DEBUG 0x300
+#define OCP_SECURITY 0x400
+#define OCP_ICCR 0x500 /* I-Cache Control Registers */
+#define OCP_DCCR 0x600 /* D-Cache Control Registers */
+#define OCP_OCMC 0x700 /* On Chip Memory Control Registers */
+#define OCP_STATISTICS 0x800 /* Statistics Counters */
+#define OCP_MTEST 0x900 /* Memory Test Registers */
+#define OCP_MCFG 0xa00 /* Memory Configuration Registers -- IP7000 only */
+#define OCP_DEBUG_INST 0x000 /* Up to 16M */
+
+/*
+ * General Configuration Registers (PLL)
+ */
+#define GENERAL_CFG_BASE (OCP_BASE + OCP_GENERAL)
+#define GEN_CLK_CORE_CFG 0x00
+#define GEN_CLK_IO_CFG 0x04
+#define GEN_CLK_DDR_CFG 0x08
+#define GEN_CLK_DDRDS_CFG 0x0c
+#define GEN_CLK_SLIP_CLR 0x10
+#define GEN_CLK_SLIP_START 0x14
+#define GEN_CLK_SERDES_SEL 0x18 /* IP7000 only */
+#define GEN_CLK_DDR_CFG2 0x1c /* IP7000 only */
+#define GEN_DDR_CAL_CTRL 0x30 /* IP5000 only */
+#define GEN_DDR_CAL_STAT 0x34 /* IP5000 only */
+#define GEN_USB_DFT_CTRL 0x38 /* IP5000 only */
+#define GEN_USB_DFT_STAT 0x3c /* IP5000 only */
+#define GEN_USB_PHY_CFG 0x40 /* IP7000 only */
+#define GEN_USB_PHY_TEST 0x44 /* IP7000 only */
+#define GEN_USB_PHY_STAT 0x48 /* IP7000 only */
+#define GEN_SW_RESET 0x80
+#define GEN_RESET_REASON 0x84
+#define GEN_BOND_CFG 0x88
+#define GEN_IO_PU_CFG 0x8c
+#define GEN_MEM_RM_CFG 0x90
+#define GEN_IO_CONFIG 0x94
+
+#define GEN_CLK_PLL_SECURITY_BIT_NO 31
+#define GEN_CLK_PLL_SECURITY (1 << GEN_CLK_PLL_SECURITY_BIT_NO)
+#define GEN_CLK_PLL_ENSAT (1 << 30)
+#define GEN_CLK_PLL_FASTEN (1 << 29)
+#define GEN_CLK_PLL_NR(v) (((v) - 1) << 23)
+#define GEN_CLK_PLL_NF(v) (((v) - 1) << 11)
+#define GEN_CLK_PLL_OD(v) (((v) - 1) << 8)
+#define GEN_CLK_PLL_RESET (1 << 7)
+#define GEN_CLK_PLL_BYPASS (1 << 6)
+#define GEN_CLK_PLL_POWERDOWN (1 << 5)
+#define GEN_CLK_PLL_SELECT (1 << 4)
+
+#define GEN_GET_CLK_PLL_NR(v) ((((v) >> 23) & 0x003f) + 1)
+#define GEN_GET_CLK_PLL_NF(v) ((((v) >> 11) & 0x0fff) + 1)
+#define GEN_GET_CLK_PLL_OD(v) ((((v) >> 8) & 0x7) + 1)
+
+
+#define RESET_FLAG_DST_MEM_ERROR (1 << 18)
+#define RESET_FLAG_SRC1_MEM_ERROR (1 << 17)
+#define RESET_FLAG_WRITE_ADDR (1 << 16)
+#define RESET_FLAG_DST_SYNC_ERROR (1 << 15)
+#define RESET_FLAG_SRC1_SYNC_ERROR (1 << 14)
+#define RESET_FLAG_DST_ALGN_ERROR (1 << 13)
+#define RESET_FLAG_SRC1_ALGN_ERROR (1 << 12)
+#define RESET_FLAG_DST_ADDR_ERROR (1 << 11)
+#define RESET_FLAG_SRC1_ADDR_ERROR (1 << 10)
+#define RESET_FLAG_ILLEGAL_INST (1 << 9)
+#define RESET_FLAG_INST_SYNC_ERROR (1 << 8)
+#define RESET_FLAG_INST_ADDR_ERROR (1 << 7)
+#define RESET_FLAG_DATA_PORT_ERROR (1 << 6)
+#define RESET_FLAG_INST_PORT_ERROR (1 << 5)
+#define RESET_FLAG_SW_RESET (1 << 4)
+#define RESET_FLAG_DEBUG (1 << 3)
+#define RESET_FLAG_WATCHDOG (1 << 2)
+#define RESET_FLAG_POWER_ON (1 << 1)
+#define RESET_FLAG_EXTERNAL (1 << 0)
+
+/*
+ * Timer block
+ */
+#define TIMER_BASE (OCP_BASE + OCP_TIMERS)
+#define TIMER_MPTVAL 0x00
+#define TIMER_RTCOM 0x04
+#define TIMER_TKEY 0x08
+#define TIMER_WDCOM 0x0c
+#define TIMER_WDCFG 0x10
+#define TIMER_SYSVAL 0x14
+#define TIMER_SYSCOM(tmr) (0x18 + (tmr) * 4)
+#define TIMER_TRN_CFG 0x100
+#define TIMER_TRN 0x104
+
+#define TIMER_COUNT 10
+#define TIMER_INT(tmr) INT_CHIP(1, (tmr))
+#define TIMER_TKEYVAL 0xa1b2c3d4
+#define TIMER_WATCHDOG_DISABLE 0x4d3c2b1a
+#define TIMER_TRN_CFG_ENABLE_OSC 0x00000007
+
+#ifndef __ASSEMBLY__
+/*
+ * ubicom32_io_timer
+ */
+struct ubicom32_io_timer {
+ volatile u32_t mptval;
+ volatile u32_t rtcom;
+ volatile u32_t tkey;
+ volatile u32_t wdcom;
+ volatile u32_t wdcfg;
+ volatile u32_t sysval;
+ volatile u32_t syscom[TIMER_COUNT];
+ volatile u32_t reserved[64 - 6 - TIMER_COUNT]; // skip all the way to OCP-TRNG section
+ volatile u32_t rsgcfg;
+ volatile u32_t trn;
+};
+
+#define UBICOM32_IO_TIMER ((struct ubicom32_io_timer *)TIMER_BASE)
+#endif
+
+#define UBICOM32_VECTOR_TO_TIMER_INDEX(vector) (vector - TIMER_INT(0))
+
+/*
+ * OCP-Debug Module (Mailbox)
+ */
+#define ISD_MAILBOX_BASE (OCP_BASE + OCP_DEBUG)
+#define ISD_MAILBOX_IN 0x00
+#define ISD_MAILBOX_OUT 0x04
+#define ISD_MAILBOX_STATUS 0x08
+
+#define ISD_MAILBOX_INT INT_CHIP(1, 30)
+
+#define ISD_MAILBOX_STATUS_IN_FULL (1 << 31)
+#define ISD_MAILBOX_STATUS_IN_EMPTY (1 << 30)
+#define ISD_MAILBOX_STATUS_OUT_FULL (1 << 29)
+#define ISD_MAILBOX_STATUS_OUT_EMPTY (1 << 28)
+
+/*
+ * OCP-Security
+ */
+#define SECURITY_BASE (OCP_BASE + OCP_SECURITY)
+#define SECURITY_BASE_EFFECTIVE_ADDRESS (SECURITY_BASE >> 7) // To load the base address in a single instruction
+#define SECURITY_CTRL 0x00
+#define SECURITY_CTRL_BYTE_OFFSET(x) ((x) << 16)
+#define SECURITY_CTRL_KEY_SIZE(x) ((x) << 8)
+#define SECURITY_CTRL_HASH_ALG_NONE (0 << 4)
+#define SECURITY_CTRL_HASH_ALG_MD5 (1 << 4)
+#define SECURITY_CTRL_HASH_ALG_SHA1 (2 << 4)
+#define SECURITY_CTRL_CBC (1 << 3)
+#define SECURITY_CTRL_CIPHER_ALG_AES (0 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_NONE (1 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_DES (2 << 1)
+#define SECURITY_CTRL_CIPHER_ALG_3DES (3 << 1)
+#define SECURITY_CTRL_ENCIPHER (1 << 0)
+#define SECURITY_CTRL_DECIPHER (0 << 0)
+#define SECURITY_STAT 0x04
+#define SECURITY_STAT_BUSY (1 << 0)
+#define SECURITY_KEY_VALUE(x) (0x10 + (x) * 4)
+#define SECURITY_KEY_IN(x) (0x30 + (x) * 4)
+#define SECURITY_KEY_OUT(x) (0x50 + (x) * 4)
+#define SECURITY_KEY_HASH(x) (0x70 + (x) * 4)
+
+/*
+ * OCP-ICCR
+ */
+#define ICCR_BASE (OCP_BASE + OCP_ICCR)
+#define ICACHE_TOTAL_SIZE 16384 /* in bytes */
+
+/*
+ * OCP-DCCR
+ */
+#define DCCR_BASE (OCP_BASE + OCP_DCCR)
+#if defined(IP5000) || defined(IP5000_REV2)
+#define DCACHE_TOTAL_SIZE 8192 /* in bytes */
+#elif defined(IP7000) || defined(IP7000_REV2)
+#define DCACHE_TOTAL_SIZE 16384 /* in bytes */
+#endif
+
+#if defined(IP5000) || defined(IP5000_REV2) || defined(IP7000) || defined(IP7000_REV2)
+#define DCACHE_WRITE_QUEUE_LENGTH 6
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+#define CACHE_LINE_SIZE 32 /* in bytes */
+
+#define CCR_ADDR 0x00
+#define CCR_RDD 0x04
+#define CCR_WRD 0x08
+#define CCR_STAT 0x0c
+#define CCR_CTRL 0x10
+
+#define CCR_STAT_MCBE 0
+#define CCR_STAT_WIDEL 1 /* D-cache only */
+
+#define CCR_CTRL_DONE 0
+#define CCR_CTRL_RESET 2
+#define CCR_CTRL_VALID 3
+#define CCR_CTRL_RD_DATA (1 << 4)
+#define CCR_CTRL_RD_TAG (2 << 4)
+#define CCR_CTRL_WR_DATA (3 << 4)
+#define CCR_CTRL_WR_TAG (4 << 4)
+#define CCR_CTRL_INV_INDEX (5 << 4)
+#define CCR_CTRL_INV_ADDR (6 << 4)
+#define CCR_CTRL_FLUSH_INDEX (7 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_INV_INDEX (8 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_ADDR (9 << 4) /* D-cache only */
+#define CCR_CTRL_FLUSH_INV_ADDR (10 << 4) /* D-cache only */
+
+/*
+ * OCP-OCMC
+ */
+#define OCMC_BASE (OCP_BASE + OCP_OCMC)
+#define OCMC_BANK_MASK 0x00
+#define OCMC_BIST_CNTL 0x04 /* IP5000 only */
+#define OCMC_BIST_STAT 0x08 /* IP5000 only */
+
+#define OCMC_BANK_PROG(n) ((1<<(n))-1)
+
+#define OCMC_BIST_WRCK (1 << 7)
+#define OCMC_BIST_RESET (1 << 5)
+#define OCMC_BIST_SMART (1 << 4)
+#define OCMC_BIST_RUN (1 << 3)
+#define OCMC_BIST_REPAIR (1 << 2)
+
+#define OCMC_BIST_READY (1 << 3)
+#define OCMC_BIST_FAIL (1 << 2)
+
+/*
+ * OCP-STATISTICS
+ */
+#define STATISTICS_BASE (OCP_BASE + OCP_STATISTICS)
+#define STAT_COUNTER_CTRL(n) ((n)*8)
+#define STAT_COUNTER(n) ((n)*8 + 4)
+
+#define STAT_EVENT_MP_INST 0
+#define STAT_EVENT_OCM_ACCESS 4
+#define STAT_EVENT_OCM_REQ 5
+#define STAT_EVENT_IC_REQ_INVAL 13
+#define STAT_EVENT_IC_MISS_INVAL 14
+#define STAT_EVENT_IC_REQ_INVAL_NACK 15
+#define STAT_EVENT_IC_REQ_VAL 16
+#define STAT_EVENT_IC_MISS_VAL 17
+#define STAT_EVENT_IC_REQ_VAL_NACK 18
+#define STAT_EVENT_IC_MISS_Q 19
+#define STAT_EVENT_DC_RD_REQ 20
+#define STAT_EVENT_DC_RD_MISS 21
+#define STAT_EVENT_DC_WR_REQ 22
+#define STAT_EVENT_DC_WR_MISS 23
+#define STAT_EVENT_DC_MISS_Q 24
+#define STAT_EVENT_DC_WB_FULL 25
+#define STAT_EVENT_DC_REQ_NACK 26
+#define STAT_EVENT_DC_CORE_REQ 27
+#define STAT_EVENT_DC_MISS 28
+#define STAT_EVENT_DC_EVICT 29
+#define STAT_EVENT_TRUE 30
+#define STAT_EVENT_FALSE 31
+
+/*
+ * OCP_MTEST
+ */
+#define MTEST_BASE (OCP_BASE + OCP_MTEST)
+#define MTEST_ADDR 0x00
+#define MTEST_WR 0x04
+#define MTEST_RD 0x08
+#define MTEST_CTRL 0x0c
+
+/*
+ * OCP_MCFG (IP7000 only)
+ */
+#define MCFG_BASE (OCP_BASE + OCP_MCFG)
+#define MCFG_CTRL 0x00
+#define MCFG_WCFG 0x04
+#define MCFG_RCFG 0x08
+
+/*
+ * Port registers
+ */
+#define IO_BASE 0x02000000
+#define RA (IO_BASE + 0x00000000)
+#define RB (IO_BASE + 0x00001000)
+#define RC (IO_BASE + 0x00002000)
+#define RD (IO_BASE + 0x00003000)
+#define RE (IO_BASE + 0x00004000)
+#define RF (IO_BASE + 0x00005000)
+#define RG (IO_BASE + 0x00006000)
+#define RH (IO_BASE + 0x00007000)
+#define RI (IO_BASE + 0x00008000)
+#define RJ (IO_BASE + 0x00009000)
+#define RLATCH (IO_BASE + 0x00ff0000) // For latched output only
+#define IO_PORT_BR_OFFSET 0x00000800
+
+/*
+ * General I/O Register Map (per port)
+ */
+#define IO_FUNC 0x00
+#define IO_GPIO_CTL 0x04
+#define IO_GPIO_OUT 0x08
+#define IO_GPIO_IN 0x0C
+#define IO_INT_STATUS 0x10
+#define IO_INT_MASK 0x14
+#define IO_INT_SET 0x18
+#define IO_INT_CLR 0x1C
+#define IO_TX_FIFO 0x20
+#define IO_TX_FIFO_HI 0x24
+#define IO_RX_FIFO 0x28
+#define IO_RX_FIFO_HI 0x2c
+#define IO_CTL0 0x30
+#define IO_CTL1 0x34
+#define IO_CTL2 0x38
+#define IO_STATUS0 0x3c
+#define IO_STATUS1 0x40
+#define IO_STATUS2 0x44
+#define IO_FIFO_WATER 0x48
+#define IO_FIFO_LEVEL 0x4c
+#define IO_GPIO_MASK 0x50
+
+#define IO_FUNC_FUNCTION_RESET(func) ((1 << ((func) - 1)) << 4) /* Function 0 doesn't need reset */
+#define IO_FUNC_RX_FIFO (1 << 3)
+#define IO_FUNC_SELECT(func) ((func) << 0)
+
+/*
+ * External interrupt pins.
+ */
+#define EXT_INT_IO_BIT(pin) ((pin) + 5) // Interrupt pin number -> I/O INT bit
+#define EXT_INT_RISING_EDGE(pin) (0x2 << (2*(pin) + 7))
+#define EXT_INT_FALLING_EDGE(pin) (0x1 << (2*(pin) + 7))
+
+/*
+ * Flash
+ */
+#define IO_XFL_BASE RA
+
+#define IO_XFL_INT_START (1 << 16)
+#define IO_XFL_INT_ERR (1 << 8)
+#define IO_XFL_INT_DONE (1 << 0)
+
+#define IO_XFL_CTL0_MASK (0xffe07fff)
+#define IO_XFL_CTL0_RD_CMD(cmd) (((cmd) & 0xff) << 24)
+#define IO_XFL_CTL0_RD_DUMMY(n) (((n) & 0x7) << 21)
+#define IO_XFL_CTL0_CLK_WIDTH(core_cycles) ((((core_cycles) + 1) & 0x7e) << 8) /* must be even number */
+#define IO_XFL_CTL0_CE_WAIT(spi_cycles) (((spi_cycles) & 0x3f) << 2)
+#define IO_XFL_CTL0_MCB_LOCK (1 << 1)
+#define IO_XFL_CTL0_ENABLE (1 << 0)
+#define IO_XFL_CTL0_FAST_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(0xb) | IO_XFL_CTL0_RD_DUMMY(1) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
+#define IO_XFL_CTL0_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(3) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE)
+
+#define IO_XFL_CTL1_MASK (0xc0003fff)
+#define IO_XFL_CTL1_FC_INST(inst) (((inst) & 0x3) << 30)
+#define IO_XFL_CTL1_FC_DATA(n) (((n) & 0x3ff) << 4)
+#define IO_XFL_CTL1_FC_DUMMY(n) (((n) & 0x7) << 1)
+#define IO_XFL_CTL1_FC_ADDR (1 << 0)
+
+#define IO_XFL_CTL2_FC_CMD(cmd) (((cmd) & 0xff) << 24)
+#define IO_XFL_CTL2_FC_ADDR(addr) ((addr) & 0x00ffffff) /* Only up to 24 bits */
+
+#define IO_XFL_STATUS0_MCB_ACTIVE (1 << 0)
+#define IO_XFL_STATUS0_IOPCS_ACTIVE (1 << 1)
+
+/*
+ * SDRAM
+ */
+#define IO_SDRAM_DATA_BASE RG
+#define IO_SDRAM_CNTL_BASE RH
+
+#define IO_SDRAM_CTRL0_EN_REF (1 << 0)
+
+/*
+ * Port function code (common fucntion codes for all I/O ports)
+ */
+#define IO_PORTX_FUNC_GPIO 0x00
+#define IO_PORTX_FUNC_XFL 0x01
+#define IO_PORTX_FUNC_PCI 0x01
+#define IO_PORTX_FUNC_SERDES 0x01
+#define IO_PORTX_FUNC_GMII 0x01
+#define IO_PORTX_FUNC_DDR 0x01
+#define IO_PORTX_FUNC_PCIX 0x01
+#define IO_PORTX_FUNC_USB2_0 0x01
+#define IO_PORTX_FUNC_GPIO_INT_CLK 0x02
+#define IO_PORTX_FUNC_PLIO 0x02
+#define IO_PORTX_FUNC_GPIO_INT 0x03
+#define IO_PORTX_FUNC_MII 0x03
+
+/*
+ * Port 0
+ */
+#define IO_PORT0_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT0_FUNC_XFL_INT_CLK IO_PORTX_FUNC_XFL // Default mode after reset
+#define IO_PORT0_FUNC_GPIO_INT_CLK IO_PORTX_FUNC_GPIO_INT_CLK
+#define IO_PORT0_FUNC_GPIO_INT IO_PORTX_FUNC_GPIO_INT
+
+/*
+ * Port 1
+ */
+#define IO_PORT1_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT1_FUNC_PCI IO_PORTX_FUNC_PCI // PCI control
+#define IO_PORT1_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
+
+/*
+ * Port 2
+ */
+#define IO_PORT2_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT2_FUNC_PCI IO_PORTX_FUNC_PCI // PCI data I/O
+#define IO_PORT2_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+
+/*
+ * Port 3
+ */
+#define IO_PORT3_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT3_FUNC_SERDES IO_PORTX_FUNC_SERDES
+#define IO_PORT3_FUNC_PLIO IO_PORTX_FUNC_PLIO
+
+/*
+ * Port 4
+ */
+#define IO_PORT4_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT4_FUNC_SERDES IO_PORTX_FUNC_SERDES
+#define IO_PORT4_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+#define IO_PORT4_FUNC_MII IO_PORTX_FUNC_MII
+
+/*
+ * Port 5
+ */
+#define IO_PORT5_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT5_FUNC_GMII IO_PORTX_FUNC_GMII
+
+/*
+ * Port 6
+ */
+#define IO_PORT6_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT6_FUNC_DDR IO_PORTX_FUNC_DDR
+
+/*
+ * Port 7
+ */
+#define IO_PORT7_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT7_FUNC_DDR IO_PORTX_FUNC_DDR
+
+/*
+ * Port 8
+ */
+#define IO_PORT8_FUNC_GPIO IO_PORTX_FUNC_GPIO
+#define IO_PORT8_FUNC_PCIX IO_PORTX_FUNC_PCIX
+#define IO_PORT8_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM
+#define IO_PORT8_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension
+
+/*
+ * Port 9
+ */
+#define IO_PORT9_FUNC_USB2_0 IO_PORTX_FUNC_USB2_0
+
+/*
+ * FIFO
+ */
+#define IO_PORTX_INT_FIFO_TX_RESET (1 << 31)
+#define IO_PORTX_INT_FIFO_RX_RESET (1 << 30)
+#define IO_PORTX_INT_FIFO_TX_UF (1 << 15)
+#define IO_PORTX_INT_FIFO_TX_WM (1 << 14)
+#define IO_PORTX_INT_FIFO_RX_OF (1 << 13)
+#define IO_PORTX_INT_FIFO_RX_WM (1 << 12)
+
+#define IO_PORTX_FUNC_FIFO_TX_WM(n) ((n) << 16)
+#define IO_PORTX_FUNC_FIFO_RX_WM(n) ((n) << 0)
+
+/*
+ * MII
+ */
+#define IO_PORTX_INT_MII_TX_ERR_SEND (1 << 18)
+#define IO_PORTX_INT_MII_TX_HALT (1 << 17)
+#define IO_PORTX_INT_MII_TX_START (1 << 16)
+#define IO_PORTX_INT_MII_THRESHOLD (1 << 8)
+#define IO_PORTX_INT_MII_RX_EOP (1 << 7)
+#define IO_PORTX_INT_MII_RX_SFD (1 << 6)
+#define IO_PORTX_INT_MII_RX_ERR (1 << 5)
+#define IO_PORTX_INT_MII_TX_EOP (1 << 4)
+#define IO_PORTX_INT_MII_COL (1 << 3)
+#define IO_PORTX_INT_MII_CRS (1 << 2)
+#define IO_PORTX_INT_MII_ODD_NIB_ERR (1 << 1)
+#define IO_PORTX_INT_MII_FALSE_CARRIER (1 << 0)
+
+/*
+ * SerDes
+ */
+#define IO_PORTX_INT_SERDES_TXBUF_VALID (1 << 16)
+#define IO_PORTX_INT_SERDES_RXERR (1 << 7)
+#define IO_PORTX_INT_SERDES_RXEOP (1 << 6)
+#define IO_PORTX_INT_SERDES_SYND (1 << 5)
+#define IO_PORTX_INT_SERDES_TXBE (1 << 4)
+#define IO_PORTX_INT_SERDES_TXEOP (1 << 3)
+#define IO_PORTX_INT_SERDES_SXLP (1 << 2)
+#define IO_PORTX_INT_SERDES_RXBF (1 << 1)
+#define IO_PORTX_INT_SERDES_RXCRS (1 << 0)
+
+#ifndef __ASSEMBLY__
+struct ubicom32_io_port {
+ volatile u32_t function;
+ volatile u32_t gpio_ctl;
+ volatile u32_t gpio_out;
+ volatile u32_t gpio_in;
+ volatile u32_t int_status;
+ volatile u32_t int_mask;
+ volatile u32_t int_set;
+ volatile u32_t int_clr;
+ volatile u32_t tx_fifo;
+ volatile u32_t tx_fifo_hi;
+ volatile u32_t rx_fifo;
+ volatile u32_t rx_fifo_hi;
+ volatile u32_t ctl0;
+ volatile u32_t ctl1;
+ volatile u32_t ctl2;
+ volatile u32_t status0;
+ volatile u32_t status1;
+ volatile u32_t status2;
+ volatile u32_t fifo_watermark;
+ volatile u32_t fifo_level;
+ volatile u32_t gpio_mask;
+};
+
+#define UBICOM32_IO_PORT(port) ((struct ubicom32_io_port *)((port)))
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ubicom32_set_interrupt()
+ */
+extern inline void ubicom32_set_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "move.4 "D(INT_SET(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "move.4 "D(INT_SET(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+}
+
+/*
+ * ubicom32_clear_interrupt()
+ */
+extern inline void ubicom32_clear_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "move.4 "D(INT_CLR(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "move.4 "D(INT_CLR(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "r" (ibit)
+ );
+}
+
+/*
+ * ubicom32_enable_interrupt()
+ */
+extern inline void ubicom32_enable_interrupt(u8_t interrupt)
+{
+ u32_t ibit = INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "or.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "or.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+}
+
+/*
+ * ubicom32_disable_interrupt()
+ */
+extern inline void ubicom32_disable_interrupt(u8_t interrupt)
+{
+ u32_t ibit = ~INT_BIT_MASK(interrupt);
+
+ if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) {
+ asm volatile (
+ "and.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+
+ return;
+ }
+
+ asm volatile (
+ "and.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t"
+ :
+ : "d" (ibit)
+ );
+}
+
+/*
+ * ubicom32_enable_global_interrupts()
+ */
+extern inline void ubicom32_enable_global_interrupts(void)
+{
+ asm volatile(
+ "bset GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
+ );
+}
+
+/*
+ * ubicom32_disable_global_interrupts()
+ */
+extern inline void ubicom32_disable_global_interrupts(void)
+{
+ asm volatile(
+ "bclr GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")"
+ );
+}
+
+/*
+ * ubicom32_get_reset_reason()
+ */
+extern inline u32_t ubicom32_get_reset_reason(void)
+{
+ return *(u32_t *)(GENERAL_CFG_BASE + GEN_RESET_REASON);
+}
+
+/*
+ * ubicom32_read_reg()
+ */
+extern inline u32_t ubicom32_read_reg(volatile void *reg)
+{
+ u32_t v;
+ asm volatile (
+ "move.4 %[dest], %[src] \n\t"
+ : [dest] "=r" (v)
+ : [src] "m" (*(u32_t *)reg)
+ );
+ return v;
+}
+
+/*
+ * ubicom32_write_reg()
+ */
+extern inline void ubicom32_write_reg(volatile void *reg, u32_t v)
+{
+ asm volatile (
+ "move.4 %[dest], %[src] \n\t"
+ :
+ : [src] "r" (v), [dest] "m" (*(u32_t *)reg)
+ );
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_IP5000_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ipcbuf.h
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/ipcbuf.h
+ * Definition of ipc64_perm struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IPCBUF_H
+#define _ASM_UBICOM32_IPCBUF_H
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_UBICOM32_IPCBUF_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/irqflags.h
@@ -0,0 +1,94 @@
+/*
+ * arch/ubicom32/include/asm/irqflags.h
+ * Raw implementation of local IRQ functions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQFLAGS_H
+#define _ASM_UBICOM32_IRQFLAGS_H
+
+#include <linux/thread_info.h>
+#include <asm/ubicom32-common.h>
+#include <asm/smp.h>
+#include <asm/ldsr.h>
+
+#if defined(CONFIG_PREEMPT)
+#error Not supported by Ubicom32 irq handling, yet!
+#endif
+
+/*
+ * raw_local_irq_enable()
+ * Enable interrupts for this thread.
+ */
+static inline void raw_local_irq_enable(void)
+{
+ ldsr_local_irq_enable();
+}
+
+/*
+ * raw_local_irq_disable()
+ * Disable interrupts for this thread.
+ */
+static inline void raw_local_irq_disable(void)
+{
+ ldsr_local_irq_disable();
+}
+
+/*
+ * raw_local_save_flags()
+ * Get the current IRQ state.
+ */
+#define raw_local_save_flags(flags) \
+do { \
+ (flags) = ldsr_local_irq_is_disabled(); \
+} while (0)
+
+/*
+ * raw_local_irq_save()
+ * Save the current interrupt state and disable interrupts.
+ */
+#define raw_local_irq_save(flags) \
+do { \
+ (flags) = ldsr_local_irq_save(); \
+} while (0)
+
+/*
+ * raw_local_irq_restore()
+ * Restore the IRQ state back to flags.
+ */
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ ldsr_local_irq_restore(flags);
+}
+
+/*
+ * raw_irqs_disabled_flags()
+ * Return true if the flags indicate that IRQ(s) are disabled.
+ */
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags);
+}
+
+#endif /* _ASM_UBICOM32_IRQFLAGS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/irq.h
@@ -0,0 +1,45 @@
+/*
+ * arch/ubicom32/include/asm/irq.h
+ * IRQ definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQ_H
+#define _ASM_UBICOM32_IRQ_H
+
+#include <asm/irqflags.h>
+
+/*
+ * We setup the IRQS to cover the full range of interrupt registers in
+ * processor.
+ */
+#define NR_IRQS 64
+
+#define irq_canonicalize(irq) (irq)
+
+extern int irq_soft_alloc(unsigned int *soft);
+extern void ack_bad_irq(unsigned int irq);
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _ASM_UBICOM32_IRQ_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/irq_regs.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/irq_regs.h
+ * Generic irq_regs.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_IRQ_REGS_H
+#define _ASM_UBICOM32_IRQ_REGS_H
+
+#include <asm-generic/irq_regs.h>
+
+#endif /* _ASM_UBICOM32_IRQ_REGS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
--- /dev/null
+++ b/arch/ubicom32/include/asm/kdebug.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/kdebug.h
+ * Generic kdebug.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_KDEBUG_H
+#define _ASM_UBICOM32_KDEBUG_H
+
+#include <asm-generic/kdebug.h>
+
+#endif /* _ASM_UBICOM32_KDEBUG_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/kmap_types.h
@@ -0,0 +1,48 @@
+/*
+ * arch/ubicom32/include/asm/kmap_types.h
+ * Definition of km_type's for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_KMAP_TYPES_H
+#define _ASM_UBICOM32_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_UBICOM32_KMAP_TYPES_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ldsr.h
@@ -0,0 +1,186 @@
+/*
+ * arch/ubicom32/include/asm/ldsr.h
+ * Ubicom32 LDSR interface definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LDSR_H
+#define _ASM_UBICOM32_LDSR_H
+
+#include <asm/ubicom32-common.h>
+#include <asm/types.h>
+#include <asm/thread.h>
+
+extern unsigned int ldsr_soft_irq_mask;
+
+/*
+ * ldsr_local_irq_is_disabled()
+ * Test if interrupts are disabled for this thread?
+ */
+static inline int ldsr_local_irq_is_disabled(void)
+{
+ int ret;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+
+ asm volatile (
+ " and.4 %0, scratchpad1, %1 \n\t"
+ : "=r" (ret)
+ : "d" (mask)
+ : "cc"
+ );
+
+ /*
+ * We return a simple 1 == disabled, 0 == enabled
+ * losing which tid this is for, because Linux
+ * can restore interrupts on a different thread.
+ */
+ return ret >> self;
+}
+
+/*
+ * ldsr_local_irq_save()
+ * Get the current interrupt state and disable interrupts.
+ */
+static inline unsigned int ldsr_local_irq_save(void)
+{
+ int ret;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " and.4 %0, scratchpad1, %1 \n\t"
+ " or.4 scratchpad1, scratchpad1, %1 \n\t"
+ : "=&r" (ret)
+ : "d" (mask)
+ : "cc", "memory"
+ );
+
+ /*
+ * We return a simple 1 == disabled, 0 == enabled
+ * losing which tid this is for, because Linux
+ * can restore interrupts on a different thread.
+ */
+ return ret >> self;
+}
+
+/*
+ * ldsr_local_irq_restore()
+ * Restore this cpu's interrupt enable/disable state.
+ *
+ * Note: flags is either 0 or 1.
+ */
+static inline void ldsr_local_irq_restore(unsigned int flags)
+{
+ unsigned int temp;
+ thread_t self = thread_get_self();
+ unsigned int mask = (1 << self);
+ flags = (flags << self);
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ *
+ * Atomic change to our bit in scratchpad1 without
+ * causing any temporary glitch in the value and
+ * without effecting other values. Also this uses
+ * no branches so no penalties.
+ */
+ asm volatile (
+ " xor.4 %0, scratchpad1, %1 \n\t"
+ " and.4 %0, %2, %0 \n\t"
+ " xor.4 scratchpad1, scratchpad1, %0 \n\t"
+ " move.4 int_set0, %3 \n\t"
+ : "=&d"(temp)
+ : "d"(flags), "r"(mask), "r"(ldsr_soft_irq_mask)
+ : "cc", "memory"
+ );
+}
+
+/*
+ * ldsr_local_irq_disable_interrupt()
+ * Disable ints for this thread.
+ */
+static inline void ldsr_local_irq_disable(void)
+{
+ unsigned int mask = (1 << thread_get_self());
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " or.4 scratchpad1, scratchpad1, %0 \n\t"
+ :
+ : "d" (mask)
+ : "cc", "memory"
+ );
+}
+
+/*
+ * ldsr_local_irq_enable_interrupt
+ * Enable ints for this thread.
+ */
+static inline void ldsr_local_irq_enable(void)
+{
+ unsigned int mask = (1 << thread_get_self());
+
+ /*
+ * Ensure the compiler can not optimize out the code
+ * (volatile) and that it does not "cache" values around
+ * the interrupt state change (memory). This ensures
+ * that interrupt changes are treated as a critical
+ * section.
+ */
+ asm volatile (
+ " and.4 scratchpad1, scratchpad1, %0 \n\t"
+ " move.4 int_set0, %1 \n\t"
+ :
+ : "d" (~mask), "r" (ldsr_soft_irq_mask)
+ : "cc", "memory"
+ );
+}
+
+extern void ldsr_init(void);
+extern void ldsr_set_trap_irq(unsigned int irq);
+extern void ldsr_mask_vector(unsigned int vector);
+extern void ldsr_unmask_vector(unsigned int vector);
+extern void ldsr_enable_vector(unsigned int vector);
+extern void ldsr_disable_vector(unsigned int vector);
+extern thread_t ldsr_get_threadid(void);
+
+#endif /* _ASM_UBICOM32_LDSR_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/linkage.h
@@ -0,0 +1,34 @@
+/*
+ * arch/ubicom32/include/asm/linkage.h
+ * Definition of Ubicom32 architecture specific linkage types.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LINKAGE_H
+#define _ASM_UBICOM32_LINKAGE_H
+
+#define __ocm_text __section(.ocm_text)
+#define __ocm_data __section(.ocm_data)
+
+#endif /* _ASM_UBICOM32_LINKAGE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/local.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/local.h
+ * Generic local.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_LOCAL_H
+#define _ASM_UBICOM32_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_UBICOM32_LOCAL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/machdep.h
@@ -0,0 +1,43 @@
+/*
+ * arch/ubicom32/include/asm/machdep.h
+ * Machine dependent utility routines.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MACHDEP_H
+#define _ASM_UBICOM32_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern unsigned long hw_timer_offset(void);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)(void);
+extern void (*mach_halt)(void);
+extern void (*mach_power_off)(void);
+
+extern void config_BSP(char *command, int len);
+
+#endif /* _ASM_UBICOM32_MACHDEP_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/mc146818rtc.h
+ * Generic mc146818rtc.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_UBICOM32_MC146818RTC_H
+#define _ASM_UBICOM32_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _ASM_UBICOM32_MC146818RTC_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/mman.h
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/mman.h
+ * Memory mapping definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MMAN_H
+#define _ASM_UBICOM32_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_UBICOM32_MMAN_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/mmu_context.h
@@ -0,0 +1,60 @@
+/*
+ * arch/ubicom32/include/asm/mmu_context.h
+ * MMU context definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_MMU_CONTEXT_H
+#define _ASM_UBICOM32_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ // mm->context = virt_to_phys(mm->pgd);
+ return(0);
+}
+
+#define destroy_context(mm) do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+extern inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+}
+
+#endif /* _ASM_UBICOM32_MMU_CONTEXT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/mmu.h
@@ -0,0 +1,41 @@
+/*
+ * arch/ubicom32/include/asm/mmu.h
+ * Definition of mm_context_t struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2002, David McCullough <davidm@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MMU_H
+#define _ASM_UBICOM32_MMU_H
+
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+#endif /* _ASM_UBICOM32_MMU_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/module.h
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/module.h
+ * Ubicom32 architecture specific module definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MODULE_H
+#define _ASM_UBICOM32_MODULE_H
+
+struct mod_arch_specific {
+ void *ocm_inst;
+ int ocm_inst_size;
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#define ARCH_PROC_MODULES_EXTRA(m,mod) \
+ seq_printf(m, " OCM(%d bytes @ 0x%p)", \
+ (mod)->arch.ocm_inst_size, (mod)->arch.ocm_inst)
+
+#endif /* _ASM_UBICOM32_MODULE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/msgbuf.h
@@ -0,0 +1,58 @@
+/*
+ * arch/ubicom32/include/asm/msgbuf.h
+ * Definition of msqid64_ds struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_MSGBUF_H
+#define _ASM_UBICOM32_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for ubicom32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_UBICOM32_MSGBUF_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/mutex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/ubicom32/include/asm/mutex.h
+ * Generic mutex.h for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#ifndef _ASM_UBICOM32_MUTEX_H
+#define _ASM_UBICOM32_MUTEX_H
+
+#include <asm-generic/mutex-dec.h>
+
+#endif /* _ASM_UBICOM32_MUTEX_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/namei.h
@@ -0,0 +1,38 @@
+/*
+ * arch/ubicom32/include/asm/namei.h
+ * Definition of __emul_prefix() for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_NAMEI_H
+#define _ASM_UBICOM32_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_UBICOM32_NAMEI_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ocm-alloc.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/ocm-alloc.h
+ * Ubicom32 architecture specific ocm definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_OCM_ALLOC_H
+#define _ASM_UBICOM32_OCM_ALLOC_H
+
+
+extern void *ocm_inst_alloc(size_t size, pid_t pid);
+extern int ocm_free(const void *ptr);
+extern int ocm_inst_free(const void *ptr);
+
+#endif /* _ASM_UBICOM32_OCM_ALLOC_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ocm_size.h
@@ -0,0 +1,2 @@
+#define APP_OCM_CODE_SIZE (0x3ffc2e00-0x3ffc0000)
+#define APP_OCM_DATA_SIZE (0x3ffd3500-0x3ffc8000)
--- /dev/null
+++ b/arch/ubicom32/include/asm/ocm_text.lds.inc
@@ -0,0 +1,175 @@
+/*
+ * arch/ubicom32/include/asm/ocm_text.lds.inc
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+*(.text.do_csum)
+*(.text.tcp_packet)
+*(.text.ipt_do_table)
+*(.text.nf_conntrack_in)
+*(.text.ip_forward)
+*(.text.dev_queue_xmit)
+*(.text.netif_receive_skb)
+*(.text.ip_route_input)
+*(.text.ip_finish_output)
+*(.text.nf_iterate)
+*(.text.__hash_conntrack)
+*(.text.memset)
+*(.text.memcpy)
+*(.text.ip_rcv)
+*(.text.__nf_conntrack_find)
+*(.text.dev_hard_start_xmit)
+*(.text.vlan_dev_hard_start_xmit)
+*(.text.vlan_dev_hard_header)
+*(.text.__nf_ct_refresh_acct)
+*(.text.tcp_error)
+*(.text.pfifo_fast_enqueue)
+*(.text.ipv4_confirm)
+*(.text.ip_output)
+*(.text.neigh_connected_output)
+*(.text.nf_hook_slow)
+*(.text.nf_nat_packet)
+*(.text.local_bh_enable)
+*(.text.pfifo_fast_dequeue)
+*(.text.ubi32_eth_receive)
+*(.text.nf_nat_fn)
+*(.text.skb_checksum)
+*(.text.memmove)
+*(.text.ubi32_eth_tx_done)
+*(.text.eth_header)
+*(.text.skb_release_data)
+*(.text.nf_conntrack_find_get)
+*(.text.process_backlog)
+*(.text.vlan_skb_recv)
+*(.text.ip_rcv_finish)
+*(.text.__qdisc_run)
+*(.text.skb_push)
+*(.text.eth_type_trans)
+*(.text.__alloc_skb)
+*(.text.netif_rx)
+*(.text.nf_ip_checksum)
+*(.text.__skb_checksum_complete_head)
+*(.text.ipv4_conntrack_defrag)
+*(.text.tcp_pkt_to_tuple)
+*(.text.kfree)
+*(.text.tcp_manip_pkt)
+*(.text.skb_put)
+*(.text.nf_ct_get_tuple)
+*(.text.__kmalloc)
+*(.text.ubi32_eth_start_xmit)
+*(.text.free_block)
+*(.text.ipt_hook)
+*(.text.kmem_cache_free)
+*(.text.skb_pull_rcsum)
+*(.text.cache_alloc_refill)
+*(.text.skb_release_head_state)
+*(.text.manip_pkt)
+*(.text.ip_sabotage_in)
+*(.text.ip_forward_finish)
+*(.text.kmem_cache_alloc)
+*(.text.local_bh_disable)
+*(.text.ipv4_pkt_to_tuple)
+*(.text.inet_proto_csum_replace4)
+*(.text.__nf_ct_l4proto_find)
+*(.text.csum_partial)
+*(.text.neigh_resolve_output)
+*(.text.__kfree_skb)
+*(.text.kfree_skb)
+*(.text.__find_vlan_dev)
+*(.text.ldsr_ctxsw_thread)
+*(.text.__do_IRQ)
+*(.text.skb_pull)
+*(.text.ipv4_invert_tuple)
+*(.text.nf_ct_invert_tuplepr)
+*(.text.skb_make_writable)
+*(.text.ipv4_get_l4proto)
+*(.text.handle_IRQ_event)
+*(.text.net_rx_action)
+*(.text.__do_softirq)
+*(.text.nf_nat_in)
+*(.text.note_interrupt)
+*(.text.ipv4_conntrack_in)
+*(.text.dst_release)
+*(.text.tasklet_action)
+*(.text.nf_nat_out)
+*(.text.nf_ct_invert_tuple)
+*(.text.do_IRQ)
+*(.text.__tasklet_schedule)
+*(.text.__skb_checksum_complete)
+*(.text.ubi32_eth_interrupt)
+*(.text.dev_kfree_skb_any)
+*(.text.ret_from_interrupt_to_kernel)
+*(.text.preemptive_context_save)
+*(.text.irq_ack_vector)
+*(.text.update_wall_time)
+*(.text.ldsr_thread)
+*(.text.irq_exit)
+*(.text.ubi32_eth_do_tasklet)
+*(.text.__napi_schedule)
+*(.text.idle_cpu)
+*(.text.run_timer_softirq)
+*(.text.ldsr_mask_vector)
+*(.text.irq_enter)
+*(.text.ldsr_get_lsb)
+*(.text.ldsr_unmask_vector)
+*(.text.ip_fast_csum)
+*(.text.hrtimer_run_queues)
+*(.text.tcp_invert_tuple)
+*(.text.T___705)
+*(.text.run_posix_cpu_timers)
+*(.text.free_hot_cold_page)
+*(.text.lock_timer_base)
+*(.text.calc_delta_mine)
+*(.text.slab_destroy)
+*(.text.rcu_pending)
+*(.text.scheduler_tick)
+*(.text.hrtimer_run_pending)
+*(.text.do_softirq)
+*(.text.del_timer)
+*(.text.irq_end_vector)
+*(.text.pci_read_u32)
+*(.text.udivmodsi4)
+*(.text.memcmp)
+*(.text.memset)
+*(.text.__slab_alloc)
+*(.text.br_handle_frame)
+*(.text.br_fdb_update)
+*(.text.__br_fdb_get)
+*(.text.br_forward)
+*(.text.br_handle_frame_finish)
+*(.text.pci_write_u32)
+*(.text.kmem_freepages)
+*(.text.br_dev_queue_push_xmit)
+*(.text.ioread32)
+*(.text.next_zones_zonelist)
+*(.text.ubi32_pci_read_u32)
+*(.text.zone_watermark_ok)
+*(.text.__rmqueue_smallest)
+*(.text.ubi32_eth_napi_poll)
+*(.text.ubi32_pci_write_u32)
+*(.text.ubi32_pci_read_u32)
+*(.text._local_bh_enable)
+*(.text._local_bh_disable)
+*(.text.get_slab)
--- /dev/null
+++ b/arch/ubicom32/include/asm/page.h
@@ -0,0 +1,106 @@
+/*
+ * arch/ubicom32/include/asm/page.h
+ * Memory page related operations and definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PAGE_H
+#define _ASM_UBICOM32_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+ ((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+#include <asm-generic/page.h>
+#endif
+
+#endif /* _ASM_UBICOM32_PAGE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/page_offset.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/page_offset.h
+ * Definition of PAGE_OFFSET_RAW for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_PAGE_OFFSET_H
+#define _ASM_UBICOM32_PAGE_OFFSET_H
+
+/* This handles the memory map.. */
+#define PAGE_OFFSET_RAW 0x3ffc0000
+
+#endif /* _ASM_UBICOM32_PAGE_OFFSET_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/param.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/param.h
+ * Definition of miscellaneous constants, including HZ.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PARAM_H
+#define _ASM_UBICOM32_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ HZ
+#define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_UBICOM32_PARAM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/pci.h
@@ -0,0 +1,210 @@
+/*
+ * arch/ubicom32/include/asm/pci.h
+ * Definitions of PCI operations for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PCI_H
+#define _ASM_UBICOM32_PCI_H
+
+#include <asm/io.h>
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+
+
+/*
+ * Perform a master read/write to the PCI bus.
+ * These functions return a PCI_RESP_xxx code.
+ */
+extern u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data);
+extern u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data);
+extern u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data);
+extern u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data);
+extern u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data);
+extern u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data);
+
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x10000000
+
+#define pcibios_assign_all_busses() 0
+#define pcibios_scan_all_fns(a, b) 0
+extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+ struct list_head buses;
+ int nr_controllers;
+ int (*setup)(int nr, struct pci_sys_data *);
+ struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+ void (*preinit)(void);
+ void (*postinit)(void);
+ u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
+ int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+ struct list_head node;
+ int busnr; /* primary bus number */
+ u64 mem_offset; /* bus->cpu memory mapping offset */
+ unsigned long io_offset; /* bus->cpu IO mapping offset */
+ struct pci_bus *bus; /* PCI bus */
+ struct resource *resource[3]; /* Primary PCI bus resources */
+ /* Bridge swizzling */
+ u8 (*swizzle)(struct pci_dev *, u8 *);
+ /* IRQ mapping */
+ int (*map_irq)(struct pci_dev *, u8, u8);
+ struct hw_pci *hw;
+};
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+#define HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE 1
+#define HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY 1
+
+#ifdef CONFIG_PCI
+static inline void * pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ void *vaddr = kmalloc(size, GFP_KERNEL);
+ if(vaddr != NULL) {
+ *dma_handle = virt_to_phys(vaddr);
+ }
+ return vaddr;
+}
+
+static inline int pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
+{
+ return 1;
+}
+
+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ kfree(cpu_addr);
+ return;
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
+ size_t size, int direction)
+{
+ return virt_to_phys(ptr);
+}
+
+static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+ size_t size, int direction)
+{
+ return;
+}
+
+static inline dma_addr_t
+pci_map_page(struct pci_dev *hwdev, struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ return pci_map_single(hwdev, page_address(page) + offset, size, (int)direction);
+}
+
+static inline void
+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
+ size_t size, int direction)
+{
+ pci_unmap_single(hwdev, dma_address, size, direction);
+}
+
+static inline int
+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ return nents;
+}
+
+static inline void
+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+}
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
+{
+ return dma_addr == 0;
+}
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#endif
+
+#endif /* _ASM_UBICOM32_PCI_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/percpu.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/percpu.h
+ * Generic percpu.h for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PERCPU_H
+#define _ASM_UBICOM32_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_UBICOM32_PERCPU_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/pgalloc.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/pgalloc.h
+ * Page table allocation definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PGALLOC_H
+#define _ASM_UBICOM32_PGALLOC_H
+
+#include <linux/mm.h>
+#include <asm/setup.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_UBICOM32_PGALLOC_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/pgtable.h
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/pgtable.h
+ * Ubicom32 pseudo page table definitions and operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * and various works, Alpha, ix86, M68K, Sparc, ...et al
+ */
+#ifndef _ASM_UBICOM32_PGTABLE_H
+#define _ASM_UBICOM32_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+//vic - this bit copied from m68knommu version
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <linux/sched.h>
+
+typedef pte_t *pte_addr_t;
+
+#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *)0)
+
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+//vic - this bit copied from m68knommu version
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+/*
+ * pgprot_noncached() is only for infiniband pci support, and a real
+ * implementation for RAM would be more complicated.
+ */
+#define pgprot_noncached(prot) (prot)
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+extern inline void flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+extern inline void flush_cache_range(struct mm_struct *mm,
+ unsigned long start,
+ unsigned long end)
+{
+}
+
+/* Push the page at kernel virtual address and clear the icache */
+extern inline void flush_page_to_ram (unsigned long address)
+{
+}
+
+/* Push n pages at kernel virtual address and clear the icache */
+extern inline void flush_pages_to_ram (unsigned long address, int n)
+{
+}
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#define arch_enter_lazy_mmu_mode() do {} while (0)
+#define arch_leave_lazy_mmu_mode() do {} while (0)
+#define arch_flush_lazy_mmu_mode() do {} while (0)
+#define arch_enter_lazy_cpu_mode() do {} while (0)
+#define arch_leave_lazy_cpu_mode() do {} while (0)
+#define arch_flush_lazy_cpu_mode() do {} while (0)
+
+#endif /* _ASM_UBICOM32_PGTABLE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/poll.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/poll.h
+ * Ubicom32 specific poll() related flags definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_POLL_H
+#define _ASM_UBICOM32_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 0x0100
+
+#include <asm-generic/poll.h>
+
+#endif /* _ASM_UBICOM32_POLL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/posix_types.h
@@ -0,0 +1,93 @@
+/*
+ * arch/ubicom32/include/asm/posix_types.h
+ * Ubicom32 architecture posix types.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef __ARCH_UBICOM32_POSIX_TYPES_H
+#define __ARCH_UBICOM32_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
--- /dev/null
+++ b/arch/ubicom32/include/asm/processor.h
@@ -0,0 +1,163 @@
+/*
+ * arch/ubicom32/include/asm/processor.h
+ * Thread related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_PROCESSOR_H
+#define _ASM_UBICOM32_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/thread_info.h>
+
+#if defined(CONFIG_UBICOM32_V3)
+ #define CPU "IP5K"
+#endif
+#if defined(CONFIG_UBICOM32_V4)
+ #define CPU "IP7K"
+#endif
+#ifndef CPU
+ #define CPU "UNKNOWN"
+#endif
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ */
+extern unsigned long memory_end;
+#define TASK_SIZE (memory_end)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+/*
+ * This is the structure where we are going to save callee-saved registers.
+ * A5 is the return address, A7 is the stack pointer, A6 is the frame
+ * pointer. This is the frame that is created because of switch_to. This
+ * is not the frame due to interrupt preemption or because of syscall entry.
+ */
+
+struct thread_struct {
+ unsigned long d10; /* D10 */
+ unsigned long d11; /* D11 */
+ unsigned long d12; /* D12 */
+ unsigned long d13; /* D13 */
+ unsigned long a1; /* A1 */
+ unsigned long a2; /* A2 */
+ unsigned long a5; /* A5 return address. */
+ unsigned long a6; /* A6 */
+ unsigned long sp; /* A7 kernel stack pointer. */
+};
+
+#define INIT_THREAD { \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ sizeof(init_stack) + (unsigned long) init_stack - 8, \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp) \
+ do { \
+ regs->pc = new_pc & ~3; \
+ regs->an[5] = new_pc & ~3; \
+ regs->an[7] = new_sp; \
+ regs->nesting_level = -1; \
+ regs->frame_type = UBICOM32_FRAME_TYPE_NEW_THREAD; \
+ regs->thread_type = NORMAL_THREAD; \
+ } while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) (tsk->thread.a5)
+#define KSTK_ESP(tsk) (tsk->thread.sp)
+
+#define cpu_relax() barrier()
+
+extern void processor_init(void);
+extern unsigned int processor_timers(void);
+extern unsigned int processor_threads(void);
+extern unsigned int processor_frequency(void);
+extern int processor_interrupts(unsigned int *int0, unsigned int *int1);
+extern int processor_ocm(void **socm, void **eocm);
+extern int processor_dram(void **sdram, void **edram);
+
+#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long))
+#define KSTK_TOP(info) \
+({ \
+ unsigned long *__ptr = (unsigned long *)(info); \
+ (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \
+})
+
+#define task_pt_regs(task) \
+({ \
+ struct pt_regs *__regs__; \
+ __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
+ __regs__ - 1; \
+})
+
+#endif /* _ASM_UBICOM32_PROCESSOR_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ptrace.h
@@ -0,0 +1,177 @@
+/*
+ * arch/ubicom32/include/asm/ptrace.h
+ * Ubicom32 architecture ptrace support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_PTRACE_H
+#define _ASM_UBICOM32_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use hard coded constants because this is shared with user
+ * space and the values are NOT allowed to change. Only fields
+ * that are intended to be exposed get values.
+ */
+#define PT_D0 0
+#define PT_D1 4
+#define PT_D2 8
+#define PT_D3 12
+#define PT_D4 16
+#define PT_D5 20
+#define PT_D6 24
+#define PT_D7 28
+#define PT_D8 32
+#define PT_D9 36
+#define PT_D10 40
+#define PT_D11 44
+#define PT_D12 48
+#define PT_D13 52
+#define PT_D14 56
+#define PT_D15 60
+#define PT_A0 64
+#define PT_A1 68
+#define PT_A2 72
+#define PT_A3 76
+#define PT_A4 80
+#define PT_A5 84
+#define PT_A6 88
+#define PT_A7 92
+#define PT_SP 92
+#define PT_ACC0HI 96
+#define PT_ACC0LO 100
+#define PT_MAC_RC16 104
+#define PT_ACC1HI 108
+#define PT_ACC1LO 112
+#define PT_SOURCE3 116
+#define PT_INST_CNT 120
+#define PT_CSR 124
+#define PT_DUMMY_UNUSED 128
+#define PT_INT_MASK0 132
+#define PT_INT_MASK1 136
+#define PT_TRAP_CAUSE 140
+#define PT_PC 144
+#define PT_ORIGINAL_D0 148
+#define PT_FRAME_TYPE 152
+
+/*
+ * The following 'registers' are not registers at all but are used
+ * locate the relocated sections.
+ */
+#define PT_TEXT_ADDR 200
+#define PT_TEXT_END_ADDR 204
+#define PT_DATA_ADDR 208
+#define PT_EXEC_FDPIC_LOADMAP 212
+#define PT_INTERP_FDPIC_LOADMAP 216
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.
+ */
+enum thread_type {
+ NORMAL_THREAD,
+ KERNEL_THREAD,
+};
+
+#define UBICOM32_FRAME_TYPE_SYSCALL -1 /* System call frame */
+#define UBICOM32_FRAME_TYPE_INVALID 0 /* Invalid frame, no longer in use */
+#define UBICOM32_FRAME_TYPE_INTERRUPT 1 /* Interrupt frame */
+#define UBICOM32_FRAME_TYPE_TRAP 2 /* Trap frame */
+#define UBICOM32_FRAME_TYPE_SIGTRAMP 3 /* Signal trampoline frame. */
+#define UBICOM32_FRAME_TYPE_NEW_THREAD 4 /* New Thread. */
+
+struct pt_regs {
+ /*
+ * Data Registers
+ */
+ unsigned long dn[16];
+
+ /*
+ * Address Registers
+ */
+ unsigned long an[8];
+
+ /*
+ * Per thread misc registers.
+ */
+ unsigned long acc0[2];
+ unsigned long mac_rc16;
+ unsigned long acc1[2];
+ unsigned long source3;
+ unsigned long inst_cnt;
+ unsigned long csr;
+ unsigned long dummy_unused;
+ unsigned long int_mask0;
+ unsigned long int_mask1;
+ unsigned long trap_cause;
+ unsigned long pc;
+ unsigned long original_dn_0;
+
+ /*
+ * Frame type. Syscall frames are -1. For other types look above.
+ */
+ unsigned long frame_type;
+
+ /*
+ * These fields are not exposed to ptrace.
+ */
+ unsigned long previous_pc;
+ long nesting_level; /* When the kernel in in user space this
+ * will be -1. */
+ unsigned long thread_type; /* This indicates if this is a kernel
+ * thread. */
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long dummy;
+};
+
+#ifdef __KERNEL__
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+extern int __user_mode(unsigned long sp);
+
+#define user_mode(regs) (__user_mode((regs->an[7])))
+#define user_stack(regs) ((regs)->an[7])
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_PTRACE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/range-protect-asm.h
@@ -0,0 +1,91 @@
+/*
+ * arch/ubicom32/include/asm/range-protect-asm.h
+ * Assembly macros for enabling memory protection.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_RANGE_PROTECT_ASM_H
+#define _ASM_UBICOM32_RANGE_PROTECT_ASM_H
+
+#if defined(__ASSEMBLY__)
+
+#include <asm/thread-asm.h>
+
+/*
+ * You should only use the enable/disable ranges when you have the atomic lock,
+ * if you do not there will be problems.
+ */
+
+/*
+ * enable_kernel_ranges
+ * Enable the kernel ranges (disabling protection) for thread,
+ * where thread == (1 << thread number)
+ */
+.macro enable_kernel_ranges thread
+#ifdef CONFIG_PROTECT_KERNEL
+ or.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Enable Range Register */
+ or.4 D_RANGE0_EN, D_RANGE0_EN, \thread
+ or.4 D_RANGE1_EN, D_RANGE1_EN, \thread
+#endif
+.endm
+
+/*
+ * enable_kernel_ranges_for_current
+ * Enable the kernel ranges (disabling protection) for this thread
+ */
+.macro enable_kernel_ranges_for_current scratch_reg
+#ifdef CONFIG_PROTECT_KERNEL
+ thread_get_self_mask \scratch_reg
+ enable_kernel_ranges \scratch_reg
+#endif
+.endm
+
+/*
+ * disable_kernel_ranges
+ * Disables the kernel ranges (enabling protection) for thread
+ * where thread == (1 << thread number)
+ */
+.macro disable_kernel_ranges thread
+#ifdef CONFIG_PROTECT_KERNEL
+ not.4 \thread, \thread
+ and.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Disable Range Register */
+ and.4 D_RANGE0_EN, D_RANGE0_EN, \thread
+ and.4 D_RANGE1_EN, D_RANGE1_EN, \thread
+#endif
+.endm
+
+/*
+ * disable_kernel_ranges_for_current
+ * Disable kernel ranges (enabling protection) for this thread
+ */
+.macro disable_kernel_ranges_for_current scratch_reg
+#ifdef CONFIG_PROTECT_KERNEL
+ thread_get_self_mask \scratch_reg
+ disable_kernel_ranges \scratch_reg
+#endif
+.endm
+#endif
+
+#endif /* _ASM_UBICOM32_RANGE_PROTECT_ASM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/range-protect.h
@@ -0,0 +1,62 @@
+/*
+ * arch/ubicom32/include/asm/range-protect.h
+ * Assembly macros declared in C for enabling memory protection.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_RANGE_PROTECT_H
+#define _ASM_UBICOM32_RANGE_PROTECT_H
+
+#if !defined(__ASSEMBLY__)
+#include <asm/thread.h>
+/*
+ * The following macros should be the identical to the ones in
+ * range-protect-asm.h
+ *
+ * You should only use the enable/disable ranges when you have the atomic lock,
+ * if you do not there will be problems.
+ */
+
+/*
+ * enable_kernel_ranges
+ * Enable the kernel ranges (disabling protection) for thread,
+ * where thread == (1 << thread number)
+ */
+asm (
+ ".macro enable_kernel_ranges thread \n\t"
+#ifdef CONFIG_PROTECT_KERNEL
+ " or.4 I_RANGE0_EN, I_RANGE0_EN, \\thread \n\t" /* Enable Range Register */
+ " or.4 D_RANGE0_EN, D_RANGE0_EN, \\thread \n\t"
+ " or.4 D_RANGE1_EN, D_RANGE1_EN, \\thread \n\t"
+#endif
+ ".endm \n\t"
+);
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/range-protect-asm.h>
+
+#endif
+#endif /* _ASM_UBICOM32_RANGE_PROTECT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/resource.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/resource.h
+ * Generic definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_RESOURCE_H
+#define _ASM_UBICOM32_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_UBICOM32_RESOURCE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ring_tio.h
@@ -0,0 +1,42 @@
+/*
+ * arch/ubicom32/include/asm/ring_tio.h
+ * Ubicom32 architecture Ring TIO definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_RING_TIO_H
+#define _ASM_UBICOM32_RING_TIO_H
+
+#include <asm/devtree.h>
+
+#define RING_TIO_NODE_VERSION 2
+
+/*
+ * Devtree node for ring
+ */
+struct ring_tio_node {
+ struct devtree_node dn;
+
+ u32_t version;
+ void *regs;
+};
+
+extern void ring_tio_init(const char *node_name);
+
+#endif /* _ASM_UBICOM32_RING_TIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/scatterlist.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/scatterlist.h
+ * Definitions of struct scatterlist for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SCATTERLIST_H
+#define _ASM_UBICOM32_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* _ASM_UBICOM32_SCATTERLIST_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/sd_tio.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/sd_tio.h
+ * SD TIO definitions
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_SD_TIO_H
+#define _ASM_UBICOM32_SD_TIO_H
+
+#include <asm/devtree.h>
+
+/*
+ * Devtree node for SD
+ */
+struct sd_tio_node {
+ struct devtree_node dn;
+ void *regs;
+};
+
+#endif /* _ASM_UBICOM32_SD_TIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/sections.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/sections.h
+ * Generic sections.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SECTIONS_H
+#define _ASM_UBICOM32_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_UBICOM32_SECTIONS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/segment.h
@@ -0,0 +1,78 @@
+/*
+ * arch/ubicom32/include/asm/segment.h
+ * Memory segment definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEGMENT_H
+#define _ASM_UBICOM32_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_SEGMENT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/semaphore.h
@@ -0,0 +1,140 @@
+/*
+ * arch/ubicom32/include/asm/semaphore.h
+ * Interrupt-safe semaphores for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) Copyright 1996 Linus Torvalds
+ * m68k version by Andreas Schwab
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMAPHORE_H
+#define _ASM_UBICOM32_SEMAPHORE_H
+
+#define RW_LOCK_BIAS 0x01000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+struct semaphore {
+ atomic_t count;
+ atomic_t waking;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .waking = ATOMIC_INIT(0), \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init (struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+asmlinkage void __down_failed(void /* special register calling convention */);
+asmlinkage int __down_failed_interruptible(void /* params in registers */);
+asmlinkage int __down_failed_trylock(void /* params in registers */);
+asmlinkage void __up_wakeup(void /* special register calling convention */);
+
+asmlinkage void __down(struct semaphore * sem);
+asmlinkage int __down_interruptible(struct semaphore * sem);
+asmlinkage int __down_trylock(struct semaphore * sem);
+asmlinkage void __up(struct semaphore * sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits.
+ */
+static inline void down(struct semaphore * sem)
+{
+ might_sleep();
+
+ if (atomic_dec_return(&sem->count) < 0)
+ __down(sem);
+}
+
+static inline int down_interruptible(struct semaphore * sem)
+{
+ int ret = 0;
+
+
+ might_sleep();
+
+ if(atomic_dec_return(&sem->count) < 0)
+ ret = __down_interruptible(sem);
+ return ret;
+}
+
+static inline int down_trylock(struct semaphore * sem)
+{
+ int ret = 0;
+
+ if (atomic_dec_return (&sem->count) < 0)
+ ret = __down_trylock(sem);
+ return ret;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+ if (atomic_inc_return(&sem->count) <= 0)
+ __up(sem);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UBICOM32_SEMAPHORE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/semaphore-helper.h
@@ -0,0 +1,109 @@
+/*
+ * arch/ubicom32/include/asm/semaphore-helper.h
+ * Semaphore related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMAPHORE_HELPER_H
+#define _ASM_UBICOM32_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * m68k version by Andreas Schwab
+ */
+
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+ atomic_inc(&sem->waking);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 0;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ * 1 got the lock
+ * 0 go to sleep
+ * -EINTR interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+ struct task_struct *tsk)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 0;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ } else if (signal_pending(tsk)) {
+ atomic_inc(&sem->count);
+ ret = -EINTR;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ * 1 failed to lock
+ * 0 got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 1;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 0;
+ } else
+ atomic_inc(&sem->count);
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+#endif /* _ASM_UBICOM32_SEMAPHORE_HELPER_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/sembuf.h
@@ -0,0 +1,52 @@
+/*
+ * arch/ubicom32/include/asm/sembuf.h
+ * The semid64_ds structure for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SEMBUF_H
+#define _ASM_UBICOM32_SEMBUF_H
+
+/*
+ * The semid64_ds structure for ubicom32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_UBICOM32_SEMBUF_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/setup.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/setup.h
+ * Kernel command line length definition.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_SETUP_H
+#define _ASM_UBICOM32_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#endif /* _ASM_UBICOM32_SETUP_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/shmbuf.h
@@ -0,0 +1,69 @@
+/*
+ * arch/ubicom32/include/asm/shmbuf.h
+ * The shmid64_ds structure for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SHMBUF_H
+#define _ASM_UBICOM32_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_UBICOM32_SHMBUF_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/shmparam.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ubicom32/include/asm/shmparam.h
+ * Shared memory definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * Alpha, ix86, M68K, Sparc, ...et al
+ */
+#ifndef _ASM_UBICOM32_SHMPARAM_H
+#define _ASM_UBICOM32_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_UBICOM32_SHMPARAM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/sigcontext.h
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/sigcontext.h
+ * Definition of sigcontext struct for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGCONTEXT_H
+#define _ASM_UBICOM32_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+struct sigcontext {
+ struct pt_regs sc_regs;
+};
+
+#endif /* _ASM_UBICOM32_SIGCONTEXT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/siginfo.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/siginfo.h
+ * Generic siginfo.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGINFO_H
+#define _ASM_UBICOM32_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_UBICOM32_SIGINFO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/signal.h
@@ -0,0 +1,180 @@
+/*
+ * arch/ubicom32/include/asm/signal.h
+ * Signal related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SIGNAL_H
+#define _ASM_UBICOM32_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_SIGNAL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/smp.h
@@ -0,0 +1,83 @@
+/*
+ * arch/ubicom32/include/asm/smp.h
+ * SMP definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SMP_H
+#define _ASM_UBICOM32_SMP_H
+
+#ifndef ASSEMBLY
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/ip5000.h>
+
+typedef unsigned long address_t;
+extern cpumask_t cpu_online_map;
+extern unsigned int smp_ipi_irq;
+
+/*
+ * This magic constant controls our willingness to transfer
+ * a process across CPUs.
+ *
+ * Such a transfer incurs cache and tlb
+ * misses. The current value is inherited from i386. Still needs
+ * to be tuned for parisc.
+ */
+#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */
+#define NO_PROC_ID 0xFF /* No processor magic marker */
+#define ANY_PROC_ID 0xFF /* Any processor magic marker */
+
+#ifdef CONFIG_SMP
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+#endif /* CONFIG_SMP */
+
+static inline int __cpu_disable (void)
+{
+ return 0;
+}
+
+static inline void __cpu_die (unsigned int cpu)
+{
+ while(1) {
+ };
+}
+
+extern int __cpu_up(unsigned int cpu);
+extern void smp_send_timer_all(void);
+extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_set_affinity(unsigned int irq, cpumask_t dest);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ * TODO: Once these are fully tested, we should turn them into
+ * inline macros for performance.
+ */
+extern unsigned long smp_get_affinity(unsigned int irq, int *all);
+extern void smp_reset_ipi(unsigned long mask);
+
+#endif /* !ASSEMBLY */
+#endif /* _ASM_UBICOM32_SMP_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/socket.h
@@ -0,0 +1,84 @@
+/*
+ * arch/ubicom32/include/asm/socket.h
+ * Socket options definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SOCKET_H
+#define _ASM_UBICOM32_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#endif /* _ASM_UBICOM32_SOCKET_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/sockios.h
@@ -0,0 +1,40 @@
+/*
+ * arch/ubicom32/include/asm/sockios.h
+ * Socket-level ioctl definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SOCKIOS_H
+#define _ASM_UBICOM32_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_UBICOM32_SOCKIOS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/spinlock.h
@@ -0,0 +1,293 @@
+/*
+ * arch/ubicom32/include/asm/spinlock.h
+ * Spinlock related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SPINLOCK_H
+#define _ASM_UBICOM32_SPINLOCK_H
+
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/spinlock_types.h>
+
+/*
+ * __raw_spin_lock()
+ * Lock the lock.
+ */
+static inline void __raw_spin_lock(raw_spinlock_t *x)
+{
+ asm volatile (
+ "1: bset %0, %0, #0 \n\t"
+ " jmpne.f 1b \n\t"
+ : "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+}
+
+/*
+ * __raw_spin_unlock()
+ * Unlock the lock.
+ */
+static inline void __raw_spin_unlock(raw_spinlock_t *x)
+{
+ asm volatile (
+ " bclr %0, %0, #0 \n\t"
+ : "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+}
+
+/*
+ * __raw_spin_is_locked()
+ * Test if the lock is locked.
+ */
+static inline int __raw_spin_is_locked(raw_spinlock_t *x)
+{
+ return x->lock;
+}
+
+/*
+ * __raw_spin_unlock_wait()
+ * Wait for the lock to be unlocked.
+ *
+ * Note: the caller has not guarantee that the lock will not
+ * be acquired before they get to it.
+ */
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *x)
+{
+ do {
+ cpu_relax();
+ } while (__raw_spin_is_locked(x));
+}
+
+/*
+ * __raw_spin_trylock()
+ * Try the lock, return 0 on failure, 1 on success.
+ */
+static inline int __raw_spin_trylock(raw_spinlock_t *x)
+{
+ int ret = 0;
+
+ asm volatile (
+ " bset %1, %1, #0 \n\t"
+ " jmpne.f 1f \n\t"
+ " move.4 %0, #1 \n\t"
+ "1: \n\t"
+ : "+r" (ret), "+U4" (x->lock)
+ :
+ : "memory", "cc"
+ );
+
+ return ret;
+}
+
+/*
+ * __raw_spin_lock_flags()
+ * Spin waiting for the lock (enabling IRQ(s))
+ */
+static inline void __raw_spin_lock_flags(raw_spinlock_t *x, unsigned long flags)
+{
+ mb();
+ while (!__raw_spin_trylock(x)) {
+ /*
+ * If the flags from the IRQ are set, interrupts are disabled and we
+ * need to re-enable them.
+ */
+ if (!flags) {
+ cpu_relax();
+ } else {
+ raw_local_irq_enable();
+ cpu_relax();
+ raw_local_irq_disable();
+ }
+ }
+ mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Linux rwlocks are unfair to writers; they can be starved for an indefinite
+ * time by readers. With care, they can also be taken in interrupt context.
+ *
+ * In Ubicom32 architecture implementation, we have a spinlock and a counter.
+ * Readers use the lock to serialise their access to the counter (which
+ * records how many readers currently hold the lock).
+ * Writers hold the spinlock, preventing any readers or other writers from
+ * grabbing the rwlock.
+ */
+
+/*
+ * __raw_read_lock()
+ * Increment the counter in the rwlock.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+ rw->counter++;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * __raw_read_unlock()
+ * Decrement the counter.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+ rw->counter--;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * __raw_read_trylock()
+ * Increment the counter if we can.
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to grab the same read lock
+ */
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ retry:
+ raw_local_irq_save(flags);
+ if (__raw_spin_trylock(&rw->lock)) {
+ rw->counter++;
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+ return 1;
+ }
+
+ raw_local_irq_restore(flags);
+
+ /*
+ * If write-locked, we fail to acquire the lock
+ */
+ if (rw->counter < 0) {
+ return 0;
+ }
+
+ /*
+ * Wait until we have a realistic chance at the lock
+ */
+ while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0) {
+ cpu_relax();
+ }
+
+ goto retry;
+}
+
+/*
+ * __raw_write_lock()
+ *
+ * Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock
+ */
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+retry:
+ raw_local_irq_save(flags);
+ __raw_spin_lock_flags(&rw->lock, flags);
+
+ if (rw->counter != 0) {
+ __raw_spin_unlock(&rw->lock);
+ raw_local_irq_restore(flags);
+
+ while (rw->counter != 0)
+ cpu_relax();
+
+ goto retry;
+ }
+
+ rw->counter = -1; /* mark as write-locked */
+ mb();
+ raw_local_irq_restore(flags);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ rw->counter = 0;
+ __raw_spin_unlock(&rw->lock);
+}
+
+/* Note that we have to ensure interrupts are disabled in case we're
+ * interrupted by some other code that wants to read_trylock() this lock */
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+ unsigned long flags;
+ int result = 0;
+
+ raw_local_irq_save(flags);
+ if (__raw_spin_trylock(&rw->lock)) {
+ if (rw->counter == 0) {
+ rw->counter = -1;
+ result = 1;
+ } else {
+ /* Read-locked. Oh well. */
+ __raw_spin_unlock(&rw->lock);
+ }
+ }
+ raw_local_irq_restore(flags);
+
+ return result;
+}
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_read_can_lock(raw_rwlock_t *rw)
+{
+ return rw->counter >= 0;
+}
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_write_can_lock(raw_rwlock_t *rw)
+{
+ return !rw->counter;
+}
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
+#endif /* _ASM_UBICOM32_SPINLOCK_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/spinlock_types.h
@@ -0,0 +1,43 @@
+/*
+ * arch/ubicom32/include/asm/spinlock_types.h
+ * Spinlock related structure definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SPINLOCK_TYPES_H
+#define _ASM_UBICOM32_SPINLOCK_TYPES_H
+
+typedef struct {
+ volatile unsigned int lock;
+} raw_spinlock_t;
+
+typedef struct {
+ raw_spinlock_t lock;
+ volatile int counter;
+} raw_rwlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
+#define __RAW_RW_LOCK_UNLOCKED { __RAW_SPIN_LOCK_UNLOCKED, 0 }
+
+#endif /* _ASM_UBICOM32_SPINLOCK_TYPES_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/stacktrace.h
@@ -0,0 +1,72 @@
+/*
+ * arch/ubicom32/include/asm/stacktrace.h
+ * Stacktrace functions for the Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STACKTRACE_H
+#define _ASM_UBICOM32_STACKTRACE_H
+
+#define between(a, b, c) (( \
+ ((unsigned long) a) >= ((unsigned long) b)) && \
+ (((unsigned long)a) <= ((unsigned long)c)))
+
+/*
+ * These symbols are filled in by the linker.
+ */
+extern unsigned long _stext;
+extern unsigned long _etext;
+
+/* OCM text goes from __ocm_text_run_begin to __data_begin */
+extern unsigned long __ocm_text_run_begin;
+extern unsigned long __data_begin;
+
+/* Account for OCM case - see stacktrace.c maybe combine(also trap.c) */
+/*
+ * ubicom32_is_kernel()
+ *
+ * Check to see if the given address belongs to the kernel.
+ * NOMMU does not permit any other means.
+ */
+static inline int ubicom32_is_kernel(unsigned long addr)
+{
+ int is_kernel = between(addr, &_stext, &_etext) || \
+ between(addr, &__ocm_text_run_begin, &__data_begin);
+
+#ifdef CONFIG_MODULES
+ if (!is_kernel)
+ is_kernel = is_module_address(addr);
+#endif
+ return is_kernel;
+}
+
+extern unsigned long stacktrace_iterate(
+ unsigned long **trace,
+ unsigned long stext, unsigned long etext,
+ unsigned long ocm_stext, unsigned long ocm_etext,
+ unsigned long sstack, unsigned long estack);
+#ifdef CONFIG_STACKTRACE
+void stacktrace_save_entries(struct task_struct *tsk, struct stack_trace *trace, unsigned long sp);
+#endif
+#endif /* _ASM_UBICOM32_STACKTRACE_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/statfs.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/statfs.h
+ * Generic statfs.h definitions
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STATFS_H
+#define _ASM_UBICOM32_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_UBICOM32_STATFS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/stat.h
@@ -0,0 +1,104 @@
+/*
+ * arch/ubicom32/include/asm/stat.h
+ * File status definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STAT_H
+#define _ASM_UBICOM32_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long __unused1;
+ unsigned long st_mtime;
+ unsigned long __unused2;
+ unsigned long st_ctime;
+ unsigned long __unused3;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[2];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif /* _ASM_UBICOM32_STAT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/string.h
@@ -0,0 +1,37 @@
+/*
+ * arch/ubicom32/include/asm/string.h
+ * String operation definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_STRING_H
+#define _ASM_UBICOM32_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *b, int c, size_t len);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *to, const void *from, size_t len);
+
+#endif /* _ASM_UBICOM32_STRING_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/switch-bcm539x.h
@@ -0,0 +1,57 @@
+/*
+ * arch/ubicom32/include/asm/switch-bcm539x.h
+ * Broadcom bcm539x platform data definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SWITCH_BCM539X_H
+#define _ASM_UBICOM32_SWITCH_BCM539X_H
+
+#define SWITCH_BCM539X_FLAG_HW_RESET 0x01
+#define SWITCH_BCM539X_FLAG_SW_RESET 0x02
+
+struct switch_bcm539x_platform_data {
+ /*
+ * See flags above
+ */
+ u32_t flags;
+
+ /*
+ * GPIO to use for nReset
+ */
+ int pin_reset;
+
+
+ /*
+ * GPIO to use for chip select
+ */
+ int pin_cs;
+
+ /*
+ * Name of this switch
+ */
+ const char *name;
+};
+
+#endif /* _ASM_UBICOM32_SWITCH_BCM539X_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/system.h
@@ -0,0 +1,101 @@
+/*
+ * arch/ubicom32/include/asm/system.h
+ * Low level switching definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_SYSTEM_H
+#define _ASM_UBICOM32_SYSTEM_H
+
+#include <linux/irqflags.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/ldsr.h>
+#include <asm/irq.h>
+#include <asm/percpu.h>
+#include <asm/ubicom32-common.h>
+#include <asm/processor.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+asmlinkage void resume(void);
+extern void *__switch_to(struct task_struct *prev,
+ struct thread_struct *prev_switch,
+ struct thread_struct *next_switch);
+
+/*
+ * We will need a per linux thread sw_ksp for the switch_to macro to
+ * track the kernel stack pointer for the current thread on that linux thread.
+ */
+#define switch_to(prev,next,last) \
+({ \
+ void *_last; \
+ _last = (void *) \
+ __switch_to(prev, &prev->thread, &next->thread); \
+ (last) = _last; \
+})
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on ubicom32...
+ */
+#define nop() asm volatile ("nop"::)
+#define mb() asm volatile ("" : : :"memory")
+#define rmb() asm volatile ("" : : :"memory")
+#define wmb() asm volatile ("" : : :"memory")
+#define set_mb(var, value) ({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define read_barrier_depends() ((void)0)
+
+/*
+ * The following defines change how the scheduler calls the switch_to()
+ * macro.
+ *
+ * 1) The first causes the runqueue to be unlocked on entry to
+ * switch_to(). Since our ctx code does not play with the runqueue
+ * we do not need it unlocked.
+ *
+ * 2) The later turns interrupts on during a ctxsw to reduce the latency of
+ * interrupts during ctx. At this point in the port, we believe that this
+ * latency is not a problem since we have very little code to perform a ctxsw.
+ */
+// #define __ARCH_WANT_UNLOCKED_CTXSW
+// #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
+
+#endif /* _ASM_UBICOM32_SYSTEM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/termbits.h
@@ -0,0 +1,227 @@
+/*
+ * arch/ubicom32/include/asm/termbits.h
+ * Terminal/serial port definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TERMBITS_H
+#define _ASM_UBICOM32_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_UBICOM32_TERMBITS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/termios.h
@@ -0,0 +1,119 @@
+/*
+ * arch/ubicom32/include/asm/termios.h
+ * Ubicom32 termio definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TERMIOS_H
+#define _ASM_UBICOM32_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ unsigned short tmp; \
+ get_user(tmp, &(termio)->c_iflag); \
+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+ get_user(tmp, &(termio)->c_oflag); \
+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+ get_user(tmp, &(termio)->c_cflag); \
+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+ get_user(tmp, &(termio)->c_lflag); \
+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+ get_user((termios)->c_line, &(termio)->c_line); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_TERMIOS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/thread-asm.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/thread-asm.h
+ * Ubicom32 architecture specific thread definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_THREAD_ASM_H
+#define _ASM_UBICOM32_THREAD_ASM_H
+
+/*
+ * thread_get_self
+ * Read and shift the current thread into reg
+ */
+.macro thread_get_self reg
+ lsr.4 \reg, ROSR, #2
+ and.4 \reg, #31, \reg /* Mask to get thread number into register */
+.endm
+
+/*
+ * thread_get_self_mask
+ * Read and shift the current thread mask into reg
+ */
+.macro thread_get_self_mask reg
+ lsr.4 \reg, ROSR, #2
+ lsl.4 \reg, #1, \reg /* Thread bit */
+.endm
+
+#endif /* _ASM_UBICOM32_THREAD_ASM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/thread.h
@@ -0,0 +1,313 @@
+/*
+ * arch/ubicom32/include/asm/thread.h
+ * Ubicom32 architecture specific thread definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_THREAD_H
+#define _ASM_UBICOM32_THREAD_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <asm/ptrace.h>
+#include <asm/ubicom32-common.h>
+
+typedef int thread_t;
+typedef unsigned char thread_type_t;
+typedef void (*thread_exec_fn_t)(void *arg);
+
+#define THREAD_NULL 0x40
+#define THREAD_TYPE_HRT (1 << 0)
+#define THREAD_TYPE_SPECIAL 0
+#define THREAD_TYPE_NORMAL 0
+#define THREAD_TYPE_BACKGROUND (1 << 1)
+
+/*
+ * This is the upper bound on the maximum hardware threads that one will find
+ * on a Ubicom processor. It is used to size per hardware thread data structures.
+ */
+#define THREAD_ARCHITECTURAL_MAX 16
+
+/*
+ * TODO: Rename this at some point to be thread_
+ */
+extern unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
+
+
+/*
+ * thread_get_self()
+ */
+static inline thread_t thread_get_self(void)
+{
+ thread_t result;
+ asm (
+ "lsr.4 %0, ROSR, #2 \n\t"
+ : "=d" (result)
+ :
+ : "cc"
+ );
+ return result & 31;
+}
+
+/*
+ * thread_suspend()
+ */
+static inline void thread_suspend(void)
+{
+ asm volatile (
+ "suspend\n\t"
+ :
+ :
+ );
+}
+
+/*
+ * thread_resume()
+ */
+static inline void thread_resume(thread_t thread)
+{
+ asm volatile (
+ "move.4 MT_ACTIVE_SET, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (1 << thread)
+ );
+}
+
+
+
+/*
+ * thread_enable_mask()
+ * Enable all threads in the mask.
+ *
+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
+ */
+static inline void thread_enable_mask(unsigned int mask)
+{
+ /*
+ * must flush the pipeline twice.
+ * first pipe_flush is to ensure write to MT_EN is completed
+ * second one is to ensure any new instructions from
+ * the targeted thread (the one being disabled), that
+ * are issued while the write to MT_EN is being executed,
+ * are completed.
+ */
+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
+ asm volatile (
+ "or.4 MT_EN, MT_EN, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (mask)
+ : "cc"
+ );
+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
+}
+
+/*
+ * thread_enable()
+ */
+static inline void thread_enable(thread_t thread)
+{
+ thread_enable_mask(1 << thread);
+}
+
+/*
+ * thread_disable_mask()
+ * Disable all threads in the mask.
+ *
+ * All writes to MT_EN must be protected by the MT_EN_LOCK bit
+ */
+static inline void thread_disable_mask(unsigned int mask)
+{
+ /*
+ * must flush the pipeline twice.
+ * first pipe_flush is to ensure write to MT_EN is completed
+ * second one is to ensure any new instructions from
+ * the targeted thread (the one being disabled), that
+ * are issued while the write to MT_EN is being executed,
+ * are completed.
+ */
+ UBICOM32_LOCK(MT_EN_LOCK_BIT);
+ asm volatile (
+ "and.4 MT_EN, MT_EN, %0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ :
+ : "d" (~mask)
+ : "cc"
+ );
+ UBICOM32_UNLOCK(MT_EN_LOCK_BIT);
+}
+
+/*
+ * thread_disable()
+ */
+static inline void thread_disable(thread_t thread)
+{
+ thread_disable_mask(1 << thread);
+}
+
+/*
+ * thread_disable_others()
+ * Disable all other threads
+ */
+static inline void thread_disable_others(void)
+{
+ thread_t self = thread_get_self();
+ thread_disable_mask(~(1 << self));
+}
+
+/*
+ * thread_is_trapped()
+ * Is the specified tid trapped?
+ */
+static inline int thread_is_trapped(thread_t tid)
+{
+ int thread_mask = (1 << tid);
+ int trap_thread;
+
+ asm (
+ "move.4 %0, MT_TRAP \n\t"
+ : "=d" (trap_thread)
+ :
+ );
+ return (trap_thread & thread_mask);
+}
+
+/*
+ * thread_is_enabled()
+ * Is the specified tid enabled?
+ */
+static inline int thread_is_enabled(thread_t tid)
+{
+ int thread_mask = (1 << tid);
+ int enabled_threads;
+
+ asm (
+ "move.4 %0, MT_EN \n\t"
+ : "=d" (enabled_threads)
+ :
+ );
+ return (enabled_threads & thread_mask);
+}
+
+/*
+ * thread_get_instruction_count()
+ */
+static inline unsigned int thread_get_instruction_count(void)
+{
+ unsigned int result;
+ asm (
+ "move.4 %0, INST_CNT \n\t"
+ : "=r" (result)
+ );
+ return result;
+}
+
+/*
+ * thread_get_pc()
+ * pc could point to a speculative and cancelled instruction unless thread is disabled
+ */
+static inline void *thread_get_pc(thread_t thread)
+{
+ void *result;
+ asm (
+ "move.4 csr, %1 \n\t"
+ "setcsr_flush 0 \n\t"
+ "move.4 %0, pc \n\t"
+ "move.4 csr, #0 \n\t"
+ "setcsr_flush 0 \n\t"
+ : "=r" (result)
+ : "r" ((thread << 9) | (1 << 8))
+ );
+ return result;
+}
+
+/*
+ * thread_get_trap_cause()
+ * This should be called only when the thread is not running
+ */
+static inline unsigned int thread_get_trap_cause(thread_t thread)
+{
+ unsigned int result;
+ asm (
+ "move.4 csr, %1 \n\t"
+ "setcsr_flush 0 \n\t"
+ "move.4 %0, trap_cause \n\t"
+ "move.4 csr, #0 \n\t"
+ "setcsr_flush 0 \n\t"
+ : "=r" (result)
+ : "r" ((thread << 9) | (1 << 8))
+ );
+ return result;
+}
+
+/*
+ * THREAD_STALL macro.
+ */
+#define THREAD_STALL \
+ asm volatile ( \
+ "move.4 mt_dbg_active_clr, #-1 \n\t" \
+ "pipe_flush 0 \n\t" \
+ : \
+ : \
+ )
+
+extern unsigned int thread_get_mainline(void);
+extern void thread_set_mainline(thread_t tid);
+extern thread_t thread_alloc(void);
+extern thread_t thread_start(thread_t thread, thread_exec_fn_t exec, void *arg, unsigned int *sp_high, thread_type_t type);
+
+/*
+ * asm macros
+ */
+asm (
+/*
+ * thread_get_self
+ * Read and shift the current thread into reg
+ */
+".macro thread_get_self reg \n\t"
+" lsr.4 \\reg, ROSR, #2 \n\t"
+" and.4 \\reg, #31, \\reg \n\t"/* Mask to get thread number into
+ * register */
+".endm \n\t"
+
+/*
+ * thread_get_self_mask
+ * Read and shift the current thread mask into reg
+ */
+".macro thread_get_self_mask reg \n\t"
+" lsr.4 \\reg, ROSR, #2 \n\t"
+" lsl.4 \\reg, #1, \\reg \n\t" /* Thread bit */
+".endm \n\t"
+ );
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/thread-asm.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_THREAD_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/thread_info.h
@@ -0,0 +1,134 @@
+/*
+ * arch/ubicom32/include/asm/thread_info.h
+ * Ubicom32 architecture low-level thread information.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_THREAD_INFO_H
+#define _ASM_UBICOM32_THREAD_INFO_H
+
+#include <asm/page.h>
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ int interrupt_nesting; /* Interrupt nesting level. */
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .interrupt_nesting = 0, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+
+ asm (
+ "and.4 %0, sp, %1\n\t"
+ : "=&r" (ti)
+ : "d" (~(THREAD_SIZE-1))
+ : "cc"
+ );
+
+ return ti;
+}
+
+#define STACK_WARN (THREAD_SIZE / 8)
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR 1
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_THREAD_INFO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/timex.h
@@ -0,0 +1,56 @@
+/*
+ * arch/ubicom32/include/asm/timex.h
+ * Ubicom32 architecture timex specifications.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TIMEX_H
+#define _ASM_UBICOM32_TIMEX_H
+
+#define CLOCK_TICK_RATE 266000000
+
+// #define ARCH_HAS_READ_CURRENT_TIMER
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+extern int timer_alloc(void);
+extern void timer_set(int timervector, unsigned int cycles);
+extern int timer_reset(int timervector, unsigned int cycles);
+extern void timer_tick_init(void);
+extern void timer_device_init(void);
+
+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+extern void local_timer_interrupt(void);
+#endif
+
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+extern int local_timer_setup(unsigned int cpu);
+#endif
+
+#endif /* _ASM_UBICOM32_TIMEX_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/tlbflush.h
@@ -0,0 +1,79 @@
+/*
+ * arch/ubicom32/include/asm/tlbflush.h
+ * TLB operations for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TLB_FLUSH_H
+#define _ASM_UBICOM32_TLB_FLUSH_H
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+ BUG();
+}
+
+#endif /* _ASM_UBICOM32_TLB_FLUSH_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/tlb.h
@@ -0,0 +1,47 @@
+/*
+ * arch/ubicom32/include/asm/tlb.h
+ * Ubicom32 architecture TLB operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TLB_H
+#define _ASM_UBICOM32_TLB_H
+
+/*
+ * ubicom32 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_UBICOM32_TLB_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/topology.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/topology.h
+ * Generic topology.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TOPOLOGY_H
+#define _ASM_UBICOM32_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_UBICOM32_TOPOLOGY_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/traps.h
@@ -0,0 +1,55 @@
+/*
+ * arch/ubicom32/include/asm/traps.h
+ * Trap related definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_TRAPS_H
+#define _ASM_UBICOM32_TRAPS_H
+
+/*
+ * Trap causes passed from ultra to Host OS
+ */
+#define TRAP_CAUSE_TOTAL 13
+#define TRAP_CAUSE_DST_RANGE_ERR 12
+#define TRAP_CAUSE_SRC1_RANGE_ERR 11
+#define TRAP_CAUSE_I_RANGE_ERR 10
+#define TRAP_CAUSE_DCAPT 9
+#define TRAP_CAUSE_DST_SERROR 8
+#define TRAP_CAUSE_SRC1_SERROR 7
+#define TRAP_CAUSE_DST_MISALIGNED 6
+#define TRAP_CAUSE_SRC1_MISALIGNED 5
+#define TRAP_CAUSE_DST_DECODE_ERR 4
+#define TRAP_CAUSE_SRC1_DECODE_ERR 3
+#define TRAP_CAUSE_ILLEGAL_INST 2
+#define TRAP_CAUSE_I_SERROR 1
+#define TRAP_CAUSE_I_DECODE_ERR 0
+
+extern void trap_handler(int irq, struct pt_regs *regs);
+extern void trap_init_interrupt(void);
+extern void unaligned_emulate(unsigned int thread);
+extern int unaligned_only(unsigned int cause);
+
+#endif /* _ASM_UBICOM32_TRAPS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/types.h
@@ -0,0 +1,75 @@
+/*
+ * arch/ubicom32/include/asm/types.h
+ * Date type definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_TYPES_H
+#define _ASM_UBICOM32_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* DMA addresses are always 32-bits wide */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+/*
+ * XXX These are "Ubicom style" typedefs. They should be removed in all files used by linux.
+ */
+typedef u32 u32_t;
+typedef s32 s32_t;
+typedef u16 u16_t;
+typedef s16 s16_t;
+typedef u8 u8_t;
+typedef s8 s8_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_TYPES_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/uaccess.h
@@ -0,0 +1,347 @@
+/*
+ * arch/ubicom32/include/asm/uaccess.h
+ * User space memory access functions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * arch/alpha
+ */
+#ifndef _ASM_UBICOM32_UACCESS_H
+#define _ASM_UBICOM32_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/*
+ * Ubicom32 does not currently support the exception table handling.
+ */
+extern unsigned long search_exception_table(unsigned long);
+
+
+#if defined(CONFIG_ACCESS_OK_CHECKS_ENABLED)
+extern int __access_ok(unsigned long addr, unsigned long size);
+#else
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+ return 1;
+}
+#endif
+#define access_ok(type, addr, size) \
+ likely(__access_ok((unsigned long)(addr), (size)))
+
+/*
+ * The following functions do not exist. They keep callers
+ * of put_user and get_user from passing unsupported argument
+ * types. They result in a link time error.
+ */
+extern int __put_user_bad(void);
+extern int __get_user_bad(void);
+
+/*
+ * __put_user_no_check()
+ * Put the requested data into the user space verifying the address
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define __put_user_no_check(x, ptr, size) \
+({ \
+ int __pu_err = 0; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ *__pu_addr = (__typeof__(*(ptr)))x; \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+
+/*
+ * __put_user_check()
+ * Put the requested data into the user space verifying the address
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer.
+ */
+#define __put_user_check(x, ptr, size) \
+({ \
+ int __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \
+ __pu_err = 0; \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ *__pu_addr = (__typeof__(*(ptr)))x; \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ } \
+ __pu_err; \
+})
+
+/*
+ * __get_user_no_check()
+ * Read the value at ptr into x.
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer. If the caller passes a modifying argument for ptr (e.g. x++)
+ * this macro will not work.
+ */
+#define __get_user_no_check(x, ptr, size) \
+({ \
+ int __gu_err = 0; \
+ __typeof__((x)) __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ __gu_val = (__typeof__((x)))*(__gu_addr); \
+ break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ (x) = 0; \
+ break; \
+ } \
+ (x) = __gu_val; \
+ __gu_err; \
+})
+
+/*
+ * __get_user_check()
+ * Read the value at ptr into x.
+ *
+ * If requested, access_ok() will verify that ptr is a valid user
+ * pointer.
+ */
+#define __get_user_check(x, ptr, size) \
+({ \
+ int __gu_err = -EFAULT; \
+ __typeof__(x) __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ if (access_ok(VERIFY_READ, __gu_addr, size)) { \
+ __gu_err = 0; \
+ switch (size) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ case 8: \
+ __gu_val = (__typeof__((x)))*(__gu_addr); \
+ break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ (x) = 0; \
+ break; \
+ } \
+ } \
+ (x) = __gu_val; \
+ __gu_err; \
+})
+
+/*
+ * The "xxx" versions are allowed to perform some amount of address
+ * space checking. See access_ok().
+ */
+#define put_user(x,ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
+#define get_user(x,ptr) \
+ __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+ __put_user_no_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+ __get_user_no_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __copy_tofrom_user_no_check()
+ * Copy the data either to or from user space.
+ *
+ * Return the number of bytes NOT copied.
+ */
+static inline unsigned long
+__copy_tofrom_user_no_check(void *to, const void *from, unsigned long n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+/*
+ * copy_to_user()
+ * Copy the kernel data to user space.
+ *
+ * Return the number of bytes that were copied.
+ */
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n)) {
+ return n;
+ }
+ return __copy_tofrom_user_no_check((__force void *)to, from, n);
+}
+
+/*
+ * copy_from_user()
+ * Copy the user data to kernel space.
+ *
+ * Return the number of bytes that were copied. On error, we zero
+ * out the destination.
+ */
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ if (!access_ok(VERIFY_READ, from, n)) {
+ return n;
+ }
+ return __copy_tofrom_user_no_check(to, (__force void *)from, n);
+}
+
+#define __copy_to_user(to, from, n) \
+ __copy_tofrom_user_no_check((__force void *)to, from, n)
+#define __copy_from_user(to, from, n) \
+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
+#define __copy_to_user_inatomic(to, from, n) \
+ __copy_tofrom_user_no_check((__force void *)to, from, n)
+#define __copy_from_user_inatomic(to, from, n) \
+ __copy_tofrom_user_no_check(to, (__force void *)from, n)
+
+#define copy_to_user_ret(to, from, n, retval) \
+ ({ if (copy_to_user(to, from, n)) return retval; })
+
+#define copy_from_user_ret(to, from, n, retval) \
+ ({ if (copy_from_user(to, from, n)) return retval; })
+
+/*
+ * strncpy_from_user()
+ * Copy a null terminated string from userspace.
+ *
+ * dst - Destination in kernel space. The buffer must be at least count.
+ * src - Address of string in user space.
+ * count - Maximum number of bytes to copy (including the trailing NULL).
+ *
+ * Returns the length of the string (not including the trailing NULL. If
+ * count is smaller than the length of the string, we copy count bytes
+ * and return count.
+ *
+ */
+static inline long strncpy_from_user(char *dst, const __user char *src, long count)
+{
+ char *tmp;
+ if (!access_ok(VERIFY_READ, src, 1)) {
+ return -EFAULT;
+ }
+
+ strncpy(dst, src, count);
+ for (tmp = dst; *tmp && count > 0; tmp++, count--) {
+ ;
+ }
+ return(tmp - dst);
+}
+
+/*
+ * strnlen_user()
+ * Return the size of a string (including the ending 0)
+ *
+ * Return -EFAULT on exception, a value greater than <n> if too long
+ */
+static inline long strnlen_user(const __user char *src, long n)
+{
+ if (!access_ok(VERIFY_READ, src, 1)) {
+ return -EFAULT;
+ }
+ return(strlen(src) + 1);
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * __clear_user()
+ * Zero Userspace
+ */
+static inline unsigned long __clear_user(__user void *to, unsigned long n)
+{
+ memset(to, 0, n);
+ return 0;
+}
+
+/*
+ * clear_user()
+ * Zero user space (check for valid addresses)
+ */
+static inline unsigned long clear_user(__user void *to, unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n)) {
+ return -EFAULT;
+ }
+ return __clear_user(to, n);
+}
+
+#endif /* _ASM_UBICOM32_UACCESS_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubi32-cs4384.h
@@ -0,0 +1,53 @@
+/*
+ * arch/ubicom32/include/asm/ubi32-cs4384.h
+ * Ubicom32 architecture CS4384 driver platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_UBI32_CS4384_H
+#define _ASM_UBICOM32_UBI32_CS4384_H
+
+enum ubi32_cs4384_mclk_source {
+ UBI32_CS4384_MCLK_PWM_0,
+ UBI32_CS4384_MCLK_PWM_1,
+ UBI32_CS4384_MCLK_PWM_2,
+ UBI32_CS4384_MCLK_CLKDIV_1,
+ UBI32_CS4384_MCLK_OTHER,
+};
+
+struct ubi32_cs4384_mclk_entry {
+ /*
+ * Rate, in Hz, of this entry
+ */
+ int rate;
+
+ /*
+ * The divider to program to get the rate
+ */
+ int div;
+};
+
+struct ubi32_cs4384_platform_data {
+ enum ubi32_cs4384_mclk_source mclk_src;
+
+ int n_mclk;
+ struct ubi32_cs4384_mclk_entry *mclk_entries;
+};
+#endif /* _ASM_UBICOM32_UBI32_CS4384_H */
+
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubi32-pcm.h
@@ -0,0 +1,53 @@
+/*
+ * arch/ubicom32/include/asm/ubi32-pcm.h
+ * Ubicom32 architecture PCM driver platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_UBI32_PCM_H
+#define _ASM_UBICOM32_UBI32_PCM_H
+
+/*
+ * This function is called when the sample rate has changed
+ */
+typedef int (*ubi32_pcm_set_rate_fn_t)(void *appdata, int rate);
+
+struct ubi32pcm_platform_data {
+ /*
+ * Name of the audiotio node
+ */
+ const char *node_name;
+
+ /*
+ * Application specific data provided when calling functions
+ */
+ void *appdata;
+
+ /*
+ * Functions called when various things happen
+ */
+ ubi32_pcm_set_rate_fn_t set_rate;
+
+ /*
+ * Pointer to optional upper layer data (i.e. DAC config, etc)
+ */
+ void *priv_data;
+};
+#endif /* _ASM_UBICOM32_UBI32_PCM_H */
+
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32bl.h
@@ -0,0 +1,84 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32bl.h
+ * Ubicom32 architecture backlight driver platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_BL_H
+#define _ASM_UBICOM32_UBICOM32_BL_H
+
+/*
+ * Different backlight control mechanisms
+ */
+enum ubicom32bl_pwm_types {
+ /*
+ * PWM controlled backlight
+ */
+ UBICOM32BL_TYPE_PWM,
+
+ /*
+ * HRT based PWM backlight
+ */
+ UBICOM32BL_TYPE_PWM_HRT,
+
+ /*
+ * No dimming, just on or off
+ */
+ UBICOM32BL_TYPE_BINARY,
+};
+
+struct ubicom32bl_platform_data {
+ /*
+ * Default intensity of the backlight 0-255
+ */
+ u8_t default_intensity;
+
+ /*
+ * TRUE if the backlight sense is active low. (inverted)
+ * FALSE if the backlight sense is active high.
+ */
+ bool invert;
+
+ /*
+ * Type of the backlight
+ */
+ enum ubicom32bl_pwm_types type;
+
+ /*
+ * GPIO of the backlight if UBICOM32BL_TYPE_PWM_HRT, UBICOM32BL_TYPE_BINARY
+ */
+ unsigned gpio;
+
+ /*
+ * PWM channel and parameters of the backlight if UBICOM32BL_TYPE_PWM
+ * pre_scaler: sets the rate at which the PWM timer is clocked. (clk_core / 2^pre_scaler)
+ * period: sets the period of the timer in timer cycles
+ * The duty cycle will be directly proportional to the brightness setting.
+ */
+ u32_t pwm_channel;
+ u8_t pwm_prescale;
+ u16_t pwm_period;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_BL_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32-common-asm.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-common-asm.h
+ * Ubicom32 atomic lock operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
+#define _ASM_UBICOM32_UBICOM32_COMMON_ASM_H
+
+/*
+ * atomic_lock_acquire macro
+ * Equivalent to __atomic_lock_acquire()
+ */
+.macro atomic_lock_acquire
+ bset scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
+ jmpne.f .-4
+.endm
+
+/*
+ * atomic_lock_release macro
+ * Equivalent to __atomic_lock_release()
+ */
+.macro atomic_lock_release
+ bclr scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT
+.endm
+
+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_ASM_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32-common.h
@@ -0,0 +1,124 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-common.h
+ * Ubicom32 atomic lock operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_COMMON_H
+#define _ASM_UBICOM32_UBICOM32_COMMON_H
+
+#define S(arg) #arg
+#define D(arg) S(arg)
+/*
+ * scratchpad1 is owned by the LDSR.
+ *
+ * The upper bits provide 16 global spinlocks. Acquiring one of these
+ * global spinlocks synchornizes across multiple threads and prevents
+ * the LDSR from delivering any interrupts while the lock is held.
+ * Use these locks only when absolutely required.
+ *
+ * The lower 16 bits of scratchpad1 are used as per thread interrupt
+ * enable/disable bits. These bits will prevent a thread from receiving
+ * any interrupts.
+ *
+ * Bit Usage:
+ * - MT_EN_LOCK_BIT - Protects writes to MT_EN, so code can read current value
+ * then write a new value atomically (profiler for example)
+ * - ATOMIC_LOCK_BIT - Used to provide general purpose atomic handling.
+ * - LDSR_LOCK_BIT - Used by the LDSR exclusively to provide protection.
+ * - LSB 16 bits - Used by the LDSR to represent thread enable/disable bits.
+ */
+#define MT_EN_LOCK_BIT 31
+#define ATOMIC_LOCK_BIT 30
+#define LDSR_LOCK_BIT 29
+#define PCI_LOCK_BIT 28
+
+#if !defined(__ASSEMBLY__)
+
+#define UBICOM32_TRYLOCK(bit) \
+ asm volatile ( \
+ " move.4 %0, #0 \n\t" \
+ " bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ " jmpne.f 1f \n\t" \
+ " move.4 %0, #1 \n\t" \
+ "1: \n\t" \
+ : "=r" (ret) \
+ : \
+ : "cc", "memory" \
+ ); \
+
+#define UBICOM32_UNLOCK(bit) \
+ asm volatile ( \
+ " bclr scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ : \
+ : \
+ : "cc", "memory" \
+ ); \
+
+#define UBICOM32_LOCK(bit) \
+ asm volatile ( \
+ "1: bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \
+ " jmpne.f 1b \n\t" \
+ : \
+ : \
+ : "cc", "memory" \
+ ); \
+
+/*
+ * __atomic_lock_trylock()
+ * Attempt to acquire the lock, return TRUE if acquired.
+ */
+static inline int __atomic_lock_trylock(void)
+{
+ int ret;
+ UBICOM32_TRYLOCK(ATOMIC_LOCK_BIT);
+ return ret;
+}
+
+/*
+ * __atomic_lock_release()
+ * Release the global atomic lock.
+ *
+ * Note: no one is suspended waiting since this lock is a spinning lock.
+ */
+static inline void __atomic_lock_release(void)
+{
+ UBICOM32_UNLOCK(ATOMIC_LOCK_BIT);
+}
+
+/*
+ * __atomic_lock_acquire()
+ * Acquire the global atomic lock, spin if not available.
+ */
+static inline void __atomic_lock_acquire(void)
+{
+ UBICOM32_LOCK(ATOMIC_LOCK_BIT);
+}
+#else /* __ASSEMBLY__ */
+
+#include <asm/ubicom32-common-asm.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_UBICOM32_UBICOM32_COMMON_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32fb.h
@@ -0,0 +1,56 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32fb.h
+ * Ubicom32 architecture video frame buffer definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_UBICOM32FB_H
+#define _ASM_UBICOM32_UBICOM32FB_H
+
+#include <linux/ioctl.h>
+
+/*
+ * Set next frame
+ */
+#define UBICOM32FB_IOCTL_SET_NEXT_FRAME _IOW('r', 1, void *)
+#define UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC _IOW('r', 2, void *)
+
+/*
+ * Set Mode
+ */
+#define UBICOM32FB_IOCTL_SET_MODE _IOW('r', 3, void *)
+struct ubicom32fb_mode {
+ unsigned long width;
+ unsigned long height;
+ unsigned long flags;
+ void *next_frame;
+};
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER (1 << 8)
+
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER (1 << 7)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV (1 << 6)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB (1 << 5)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255 (1 << 4)
+
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255 (1 << 3)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1 (1 << 2)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1 (1 << 1)
+#define UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE (1 << 0)
+
+#endif /* _ASM_UBICOM32_UBICOM32FB_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32hid.h
@@ -0,0 +1,133 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32hid.h
+ * Ubicom32 architecture HID driver platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_HID_H
+#define _ASM_UBICOM32_UBICOM32_HID_H
+
+enum ubicom32hid_bl_types {
+ /*
+ * On or off, using command SET_BL_EN, PB4
+ */
+ UBICOM32HID_BL_TYPE_BINARY,
+
+ /*
+ * Dimmable, using command SET_PWM, PB3
+ */
+ UBICOM32HID_BL_TYPE_PWM,
+};
+
+/*
+ * IR code mapping to event code.
+ * If there are no button mappings and no ir mappings
+ * then no input driver will be registered.
+ */
+struct ubicom32hid_ir {
+ /*
+ * Input event code (KEY_*, SW_*, etc)
+ */
+ int code;
+
+ /*
+ * Input event type (EV_KEY, EV_SW, etc)
+ */
+ int type;
+
+ /*
+ * The IR code of this button.
+ */
+ uint32_t ir_code;
+};
+
+/*
+ * Button mapping to event code.
+ * If there are no button mappings and no ir mappings
+ * then no input driver will be registered.
+ */
+struct ubicom32hid_button {
+ /*
+ * Input event code (KEY_*, SW_*, etc)
+ */
+ int code;
+
+ /*
+ * Input event type (EV_KEY, EV_SW, etc)
+ */
+ int type;
+
+ /*
+ * Bit number of this button.
+ */
+ uint8_t bit;
+};
+
+struct ubicom32hid_platform_data {
+ /*
+ * Default intensity of the backlight 0-255
+ */
+ u8_t default_intensity;
+
+ /*
+ * GPIO number of the reset line and its polarity.
+ */
+ unsigned gpio_reset;
+ int gpio_reset_polarity;
+
+ /*
+ * TRUE if the backlight sense is active low. (inverted)
+ * FALSE if the backlight sense is active high.
+ */
+ bool invert;
+
+ /*
+ * Type of the backlight we are controlling
+ */
+ enum ubicom32hid_bl_types type;
+
+ /*
+ * Optional polling rate for input, in ms, defaults to 100ms
+ */
+ int poll_interval;
+
+ /*
+ * Optional name to register as input device
+ */
+ const char *input_name;
+
+ /*
+ * Button mapping array
+ */
+ const struct ubicom32hid_button *buttons;
+ int nbuttons;
+
+ /*
+ * IR mapping array
+ */
+ const struct ubicom32hid_ir *ircodes;
+ int nircodes;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_HID_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32input.h
@@ -0,0 +1,76 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32input.h
+ * Ubicom32 Input driver, based on gpio-keys
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * TODO: add groups for inputs which can be sampled together
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_INPUT_H
+#define _ASM_UBICOM32_UBICOM32_INPUT_H
+
+struct ubicom32input_button {
+ /*
+ * Input event code (KEY_*, SW_*, etc)
+ */
+ int code;
+
+ /*
+ * Input event type (EV_KEY, EV_SW, etc)
+ */
+ int type;
+
+ /*
+ * GPIO to poll
+ */
+ int gpio;
+
+ /*
+ * 1 for active low, 0 for active high
+ */
+ int active_low;
+
+ /*
+ * Description, used for reserving GPIOs
+ */
+ const char *desc;
+};
+
+struct ubicom32input_platform_data {
+ struct ubicom32input_button *buttons;
+ int nbuttons;
+
+ /*
+ * Optional poll interval, in ms, defaults to 50ms
+ */
+ int poll_interval;
+
+ /*
+ * Option Name of this driver
+ */
+ const char *name;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_INPUT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32input_i2c.h
@@ -0,0 +1,71 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32input_i2c.h
+ * Ubicom32 architecture Input driver over I2C platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * TODO: add groups for inputs which can be sampled together
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
+#define _ASM_UBICOM32_UBICOM32_INPUT_I2C_H
+
+struct ubicom32input_i2c_button {
+ /*
+ * Input event code (KEY_*, SW_*, etc)
+ */
+ int code;
+
+ /*
+ * Input event type (EV_KEY, EV_SW, etc)
+ */
+ int type;
+
+ /*
+ * Bit number of this button. (0 - ngpio)
+ */
+ int bit;
+
+ /*
+ * 1 for active low, 0 for active high
+ */
+ int active_low;
+};
+
+struct ubicom32input_i2c_platform_data {
+ struct ubicom32input_i2c_button *buttons;
+ int nbuttons;
+
+ /*
+ * Optional poll interval, in ms, defaults to 100ms
+ */
+ int poll_interval;
+
+ /*
+ * Option Name of this driver
+ */
+ const char *name;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_INPUT_I2C_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32lcd.h
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32lcd.h
+ * Ubicom32 architecture LCD driver platform data definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_LCD_H
+#define _ASM_UBICOM32_UBICOM32_LCD_H
+
+struct ubicom32lcd_platform_data {
+ /*
+ * GPIO and polarity for VGH signal. A FALSE polarity is active low, TRUE is active high.
+ */
+ int vgh_gpio;
+ bool vgh_polarity;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_LCD_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32ring.h
@@ -0,0 +1,103 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32ring.h
+ * Userspace I/O platform driver for Ubicom32 ring buffers
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_UBICOM32_UBICOM32RING_H
+#define _ASM_UBICOM32_UBICOM32RING_H
+
+#define UIO_UBICOM32RING_REG_VERSION 2
+
+struct uio_ubicom32ring_desc {
+ volatile unsigned int head;
+ volatile unsigned int tail;
+ unsigned int entries;
+ volatile unsigned int ring[0];
+};
+
+struct uio_ubicom32ring_regs {
+ unsigned int version;
+
+ /*
+ * Magic type used to identify the ring set. Each driver will
+ * have a different magic value.
+ */
+ unsigned int magic;
+
+ /*
+ * Registers defined by the driver
+ */
+ unsigned int regs_size;
+ void *regs;
+
+ /*
+ * The locations of the rings
+ *
+ * DO NOT ADD ANYTHING BELOW THIS LINE
+ */
+ unsigned int num_rings;
+ struct uio_ubicom32ring_desc *rings[0];
+};
+
+/*
+ * ringtio_ring_flush
+ */
+static inline void ringtio_ring_flush(struct uio_ubicom32ring_desc *rd)
+{
+ rd->head = rd->tail = 0;
+}
+
+/*
+ * ringtio_ring_get
+ */
+static inline int ringtio_ring_get(struct uio_ubicom32ring_desc *rd, void **val)
+{
+ if (rd->head == rd->tail) {
+ return 0;
+ }
+
+ *val = (void *)rd->ring[rd->head++];
+ if (rd->head == rd->entries) {
+ rd->head = 0;
+ }
+ return 1;
+}
+
+/*
+ * ringtio_ring_put
+ */
+static inline int ringtio_ring_put(struct uio_ubicom32ring_desc *rd, void *val)
+{
+ unsigned int newtail = rd->tail + 1;
+ if (newtail == rd->entries) {
+ newtail = 0;
+ }
+
+ if (newtail == rd->head) {
+ return 0;
+ }
+
+ rd->ring[rd->tail] = (unsigned int)val;
+ rd->tail = newtail;
+ return 1;
+}
+
+#endif /* _ASM_UBICOM32_UBICOM32RING_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32sd.h
@@ -0,0 +1,45 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32sd.h
+ * Ubicom32SD public include file
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_SD_H
+#define _ASM_UBICOM32_UBICOM32_SD_H
+
+struct ubicom32sd_card {
+ /*
+ * GPIOs of PWR, WP and CD lines.
+ * Polarity is 1 for active high and 0 for active low
+ */
+ int pin_pwr;
+ bool pwr_polarity;
+ int pin_wp;
+ bool wp_polarity;
+ int pin_cd;
+ bool cd_polarity;
+};
+
+struct ubicom32sd_platform_data {
+ int ncards;
+
+ struct ubicom32sd_card *cards;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_SD_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32-spi-gpio.h
@@ -0,0 +1,62 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-spi-gpio.h
+ * Platform driver data definitions for GPIO based SPI driver.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
+#define _ASM_UBICOM32_UBICOM32_SPI_GPIO_H
+
+struct ubicom32_spi_gpio_platform_data {
+ /*
+ * GPIO to use for MOSI, MISO, CLK
+ */
+ int pin_mosi;
+ int pin_miso;
+ int pin_clk;
+
+ /*
+ * Default state of CLK line
+ */
+ int clk_default;
+
+ /*
+ * Number of chip selects on this bus
+ */
+ int num_chipselect;
+
+ /*
+ * The bus number of this chip
+ */
+ int bus_num;
+};
+
+struct ubicom32_spi_gpio_controller_data {
+ /*
+ * GPIO to use for chip select
+ */
+ int pin_cs;
+};
+
+#endif /* _ASM_UBICOM32_UBICOM32_SPI_GPIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32suart.h
@@ -0,0 +1,36 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32suart.h
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_SUART_H
+#define _ASM_UBICOM32_UBICOM32_SUART_H
+
+/*
+ * Platform resource id for serdes uart clock parameter
+ */
+#define UBICOM32_SUART_IORESOURCE_CLOCK (1)
+
+#endif /* _ASM_UBICOM32_UBICOM32_SUART_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ubicom32-tio.h
@@ -0,0 +1,42 @@
+/*
+ * arch/ubicom32/include/asm/ubicom32-tio.h
+ * Threaded I/O interface definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UBICOM32_TIO_H
+#define _ASM_UBICOM32_UBICOM32_TIO_H
+
+extern u8_t usb_tio_read_u16(u32_t address, u16_t *data);
+extern u8_t usb_tio_read_u8(u32_t address, u8_t *data);
+
+extern u8_t usb_tio_write_u16(u32_t address, u16_t data);
+extern u8_t usb_tio_write_u8(u32_t address, u8_t data);
+
+extern u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes);
+extern u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes);
+extern u8_t usb_tio_write_fifo_sync(u32_t address, u32_t buffer, u32_t bytes);
+extern void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx);
+
+#endif /* _ASM_UBICOM32_UBICOM32_TIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/ucontext.h
@@ -0,0 +1,39 @@
+/*
+ * arch/ubicom32/include/asm/ucontext.h
+ * Definition of ucontext structure for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UCONTEXT_H
+#define _ASM_UBICOM32_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UBICOM32_UCONTEXT_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/unaligned.h
@@ -0,0 +1,44 @@
+/*
+ * arch/ubicom32/include/asm/unaligned.h
+ * Ubicom32 architecture unaligned memory access definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * TODO: This is a copy of arm unaligned handling that probably needs
+ * to be optimized for UBICOM32, but it works for now.
+ */
+
+#ifndef _ASM_UBICOM32_UNALIGNED_H
+#define _ASM_UBICOM32_UNALIGNED_H
+
+#include <asm/types.h>
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* _ASM_UBICOM32_UNALIGNED_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/unistd.h
@@ -0,0 +1,400 @@
+/*
+ * arch/ubicom32/include/asm/unistd.h
+ * Ubicom32 architecture syscall definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_UNISTD_H
+#define _ASM_UBICOM32_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+//#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#define cond_syscall(x) long x(void) __attribute__((weak,alias("sys_ni_syscall")))
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_UBICOM32_UNISTD_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/user.h
@@ -0,0 +1,82 @@
+/*
+ * arch/ubicom32/include/asm/user.h
+ * Ubicom32 architecture core file definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_USER_H
+#define _ASM_UBICOM32_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+/*
+ * Adapted from <asm-powerpc/user.h>
+ *
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
+ * are as follows:
+ *
+ * upage: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page long.
+ * data: The data segment follows next. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * stack: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these in order to be able
+ * to write an integer number of pages.
+ */
+
+struct user_ubicom32fp_struct {
+};
+
+struct user {
+ struct pt_regs regs; /* entire machine state */
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ unsigned long u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_UBICOM32_USER_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/vdc_tio.h
@@ -0,0 +1,129 @@
+/*
+ * arch/ubicom32/include/asm/vdc_tio.h
+ * Ubicom32 architecture VDC TIO definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_VDC_TIO_H
+#define _ASM_UBICOM32_VDC_TIO_H
+
+#include <asm/devtree.h>
+
+#define VDCTIO_VP_VERSION 5
+
+#define VDCTIO_SCALE_FLAG_VSUB (1 << 9)
+#define VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER (1 << 8)
+#define VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER (1 << 7)
+#define VDCTIO_SCALE_FLAG_YUV (1 << 6)
+#define VDCTIO_SCALE_FLAG_VRANGE_16_255 (1 << 5)
+#define VDCTIO_SCALE_FLAG_VRANGE_0_255 (1 << 4)
+#define VDCTIO_SCALE_FLAG_HSUB_2_1 (1 << 3)
+#define VDCTIO_SCALE_FLAG_HSUB_1_1 (1 << 2)
+#define VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER (1 << 1)
+#define VDCTIO_SCALE_FLAG_ENABLE (1 << 0)
+
+#define VDCTIO_NEXT_FRAME_FLAG_YUV_BIT 0
+#define VDCTIO_NEXT_FRAME_FLAG_YUV (1 << (VDCTIO_NEXT_FRAME_FLAG_YUV_BIT))
+
+#define VDCTIO_CAPS_SUPPORTS_SCALING (1 << 0)
+
+#define VDCTIO_COMMAND_START (1 << 3)
+#define VDCTIO_COMMAND_SET_COEFF (1 << 2)
+#define VDCTIO_COMMAND_SET_LUT (1 << 1)
+#define VDCTIO_COMMAND_SET_SCALE_MODE (1 << 0)
+
+/*
+ * Command / Data registers to access the VDC
+ */
+struct vdc_tio_vp_regs {
+ /*
+ * Version of this TIO register map
+ */
+ u32_t version;
+
+ volatile u32_t command;
+
+ /*
+ * Next frame pointer, when the command VDCTIO_COMMAND_SET_FRAME_BUFFER is set,
+ * the vdc will take the pointer here and display it.
+ */
+ void *next_frame;
+ u32_t next_frame_flags;
+
+ /*
+ * These map directly into the PIXP registers 0x20-0x80.
+ * DO NOT change the order of these three variables.
+ */
+ u32_t red_lut[6];
+ u32_t blue_lut[6];
+ u32_t green_lut[13];
+
+ /*
+ * These map directly into the PIXP registers 0x04, 0x08
+ */
+ u32_t coeff0;
+ u32_t coeff1;
+
+ /*
+ * There are used to set the scaling parameters
+ */
+ u32_t x_in;
+ u32_t x_out;
+ u32_t y_in;
+ u32_t y_out;
+ u32_t scale_flags;
+
+ /*
+ * Current frame number, monotonically increasing number
+ */
+ u32_t frame_number;
+
+ /*
+ * These variables tell the guest OS what the underlying hardware looks like
+ */
+ u32_t caps;
+ u32_t xres;
+ u32_t yres;
+ u32_t fb_align;
+ u8_t bpp;
+ u8_t rbits;
+ u8_t gbits;
+ u8_t bbits;
+ u8_t rshift;
+ u8_t gshift;
+ u8_t bshift;
+};
+
+/*
+ * Devtree node for VDC
+ */
+struct vdc_tio_node {
+ struct devtree_node dn;
+
+ struct vdc_tio_vp_regs *regs;
+};
+
+extern void vdc_tio_init(void);
+
+#endif /* _ASM_UBICOM32_VDC_TIO_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/vga.h
@@ -0,0 +1,71 @@
+/*
+ * arch/ubicom32/include/asm/vga.h
+ * Ubicom32 low level VGA/frame buffer definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (c) 1998 Martin Mares <mj@ucw.cz>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#ifndef _ASM_UBICOM32_VGA_H
+#define _ASM_UBICOM32_VGA_H
+
+#include <asm/byteorder.h>
+
+/*
+ * On the PC, we can just recalculate addresses and then
+ * access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x))
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#define VT_BUF_HAVE_RW
+/*
+ * These are only needed for supporting VGA or MDA text mode, which use little
+ * endian byte ordering.
+ * In other cases, we can optimize by using native byte ordering and
+ * <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+ *addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+ return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
+#endif /* _ASM_UBICOM32_VGA_H */
--- /dev/null
+++ b/arch/ubicom32/include/asm/xor.h
@@ -0,0 +1,33 @@
+/*
+ * arch/ubicom32/include/asm/xor.h
+ * Generic xor.h definitions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _ASM_UBICOM32_XOR_H
+#define _ASM_UBICOM32_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif /* _ASM_UBICOM32_XOR_H */
--- /dev/null
+++ b/arch/ubicom32/Kconfig
@@ -0,0 +1,455 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "uClinux/ubicom32 (w/o MMU) Kernel Configuration"
+
+config RAMBASE
+ hex
+ default "0x40000000"
+ help
+ Define the address that RAM starts at.
+
+config UBICOM32
+ bool
+ select HAVE_OPROFILE
+ default y
+
+config RAMKERNEL
+ bool
+ default y
+
+config CPU_BIG_ENDIAN
+ bool
+ default y
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "14"
+
+config HAVE_CLK
+ bool
+ default y
+
+config MMU
+ bool
+ default n
+
+config FPU
+ bool
+ default n
+
+config ZONE_DMA
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_GPIO
+ bool
+ default y
+
+config GPIOLIB
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config GENERIC_TIME
+ bool
+ default y
+
+config TIME_LOW_RES
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+ depends on GENERIC_CLOCKEVENTS
+ default y if SMP && !LOCAL_TIMERS
+
+config NO_IOPORT
+ def_bool y
+
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
+config IRQ_PER_CPU
+ bool
+ default y
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+ bool
+ default y
+
+menu "Processor type and features"
+
+config BRD_32MB
+ bool
+ depends on IP5160EVAL
+ help
+ Board has 32MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+config BRD_64MB
+ bool
+ depends on IP7145DPF || IP7160RGW || IP7160BRINGUP || IP7160DPF || IP5170DPF || IP5160DEV
+ help
+ Board has 64MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+config BRD_128MB
+ bool
+ depends on IP7500MODULE || IP7500AV || IP7500MEDIA
+ help
+ Board has 128MB of RAM on it. It is a hidden option used to select default for size of RAM
+ default n
+
+comment "Processor type will be selected by Board"
+
+config UBICOM32_V3
+ bool
+ help
+ Ubicom IP5xxx series processor support.
+
+config UBICOM32_V4
+ bool
+ help
+ Ubicom IP7xxx series processor support.
+
+comment "Board"
+choice
+ prompt "Board type"
+ help
+ Select your board.
+
+config NOBOARD
+ bool "No board selected"
+ help
+ Default. Don't select any board specific config. Will not build unless you change!
+
+# Add your boards here
+source "arch/ubicom32/mach-ip5k/Kconfig"
+source "arch/ubicom32/mach-ip7k/Kconfig"
+
+endchoice
+
+comment "Kernel Options"
+config SMP
+ bool "Symmetric multi-processing support"
+ select USE_GENERIC_SMP_HELPERS
+ default n
+ help
+ Enables multithreading support. Enabling SMP support increases
+ the size of system data structures. SMP support can have either
+ positive or negative impact on performance depending on workloads.
+
+ If you do not know what to do here, say N.
+
+config NR_CPUS
+ int "Number of configured CPUs"
+ range 2 32
+ default 2
+ depends on SMP
+ help
+ Upper bound on the number of CPUs. Space is reserved
+ at compile time for this many CPUs.
+
+config LOCAL_TIMERS
+ bool "Use local timer interrupts"
+ depends on SMP
+ default y
+ help
+ Enable support for local timers on SMP platforms, rather then the
+ legacy IPI broadcast method. Local timers allows the system
+ accounting to be spread across the timer interval, preventing a
+ "thundering herd" at every timer tick. A physical timer is allocated
+ per cpu.
+
+config TIMER_EXTRA_ALLOC
+ int "Number of additional physical timer events to create"
+ depends on GENERIC_CLOCKEVENTS
+ default 0
+ help
+ The Ubicom32 processor has a number of event timers that can be wrapped
+ in Linux clock event structures (assuming that the timers are not being
+ used for another purpose). Based on the value of LOCAL_TIMERS, either
+ 2 timers will be used or a timer will be used for every CPU. This value
+ allows the programmer to select additional timers over that amount.
+
+config IRQSTACKS
+ bool "Create separate stacks for interrupt handling"
+ default n
+ help
+ Selecting this causes interrupts to be created on a separate
+ stack instead of nesting the interrupts on the kernel stack.
+
+config IRQSTACKS_USEOCM
+ bool "Use OCM for interrupt stacks"
+ default n
+ depends on IRQSTACKS
+ help
+ Selecting this cause the interrupt stacks to be placed in OCM
+ reducing cache misses at the expense of using the OCM for servicing
+ interrupts.
+
+menu "OCM Instruction Heap"
+
+config OCM_MODULES_RESERVATION
+ int "OCM Instruction heap reservation. 0-192 kB"
+ range 0 192
+ default "0"
+ help
+ The minimum amount of OCM memory to reserve for kernel loadable module
+ code. If you are not using this memory it cannot be used for anything
+ else. Leave it as 0 if you have prebuilt modules that are compiled with
+ OCM support.
+
+config OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
+ bool "Give all unused ocm code space to the ocm instruction heap."
+ default n
+ help
+ Allow the OCM instruction heap allocation to consume any remaining
+ unused OCM code space. The result of this is that you will not have
+ and deterministic results, but you will not have any waste either.
+
+config OCM_MODULES_FALLBACK_TO_DDR
+ bool "Loadable Modules requiring OCM may fallback to use DDR."
+ default n
+ help
+ If a module cannot get the OCM code it requires allow DDR to
+ be used instead.
+endmenu
+
+config HZ
+ int "Frequency of 'jiffies' (for polling)"
+ default 1000
+ help
+ 100 is common for embedded systems, but 1000 allows
+ you to do more drivers without actually having
+ interrupts working properly.
+
+comment "RAM configuration"
+
+if BRD_32MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x02000000
+ default "0x02000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+if BRD_64MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x04000000
+ default "0x04000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+if BRD_128MB
+
+config RAMSIZE
+ hex "Size of RAM (in bytes)"
+ range 0x00000000 0x08000000
+ default "0x08000000"
+ help
+ Define the size of the system RAM. If you select 0 then the
+ kernel will try to probe the RAM size at runtime. This is not
+ supported on all CPU types.
+
+endif
+
+config KERNELBASE
+ hex "Address of the base of kernel code"
+ default "0x40400000"
+ help
+ For the time being we are going to start the Kernel at a 4 meg offset.
+
+comment "Build options"
+config LINKER_RELAXATION
+ bool "Linker Relaxation"
+ default y
+ help
+ Turns on linker relaxation that will produce smaller
+ faster code. Increases link time.
+
+comment "Driver options"
+menu "PCI Bus"
+config PCI
+ bool "PCI bus"
+ default true
+ help
+ Enable/Disable PCI bus
+ source "drivers/pci/Kconfig"
+
+
+config PCI_DEV0_IDSEL
+ hex "slot 0 address"
+ depends on PCI
+ default "0x01000000"
+ help
+ Slot 0 address. This address should correspond to the address line
+ which the IDSEL bit for this slot is connected to.
+
+config PCI_DEV1_IDSEL
+ hex "slot 1 address"
+ depends on PCI
+ default "0x02000000"
+ help
+ Slot 1 address. This address should correspond to the address line
+ which the IDSEL bit for this slot is connected to.
+endmenu
+# End PCI
+
+menu "Input devices"
+config UBICOM_INPUT
+ bool "Ubicom polled GPIO input driver"
+ select INPUT
+ select INPUT_POLLDEV
+ help
+ Polling input driver, much like the GPIO input driver, except that it doesn't
+ rely on interrupts. It will report events via the input subsystem.
+ default n
+
+config UBICOM_INPUT_I2C
+ bool "Ubicom polled GPIO input driver over I2C"
+ select INPUT
+ select INPUT_POLLDEV
+ help
+ Polling input driver, much like the PCA953x driver, it can support a variety of
+ different I2C I/O expanders. This device polls the I2C I/O expander for events
+ and reports them via the input subsystem.
+ default n
+endmenu
+# Input devices
+
+menu "Misc devices"
+config UBICOM_HID
+ bool "Ubicom HID driver"
+ select INPUT
+ select INPUT_POLLDEV
+ select LCD_CLASS_DEVICE
+ help
+ Driver for HID chip found on some Ubicom reference designs. This chip handles
+ PWM, button input, and IR remote control. It registers as an input device and
+ a backlight device.
+ default n
+endmenu
+# Misc devices
+
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ default n
+ help
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (i.e. non-embedded)
+ should leave this option set to 'N'.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, it is appended to this string to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ default n
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+
+endmenu
+# End Processor type and features
+
+source "arch/ubicom32/Kconfig.debug"
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "init/Kconfig"
+source "kernel/Kconfig.preempt"
+source "kernel/time/Kconfig"
+source "mm/Kconfig"
+source "net/Kconfig"
+source "drivers/Kconfig"
+source "fs/Kconfig"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
--- /dev/null
+++ b/arch/ubicom32/Kconfig.debug
@@ -0,0 +1,117 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+config PROTECT_KERNEL
+ default y
+ bool 'Enable Kernel range register Protection'
+ help
+ Adds code to enable/disable range registers to protect static
+ kernel code/data from userspace. Currently the ranges covered
+ do no protect kernel loadable modules or dynamically allocated
+ kernel data.
+
+config NO_KERNEL_MSG
+ bool "Suppress Kernel BUG Messages"
+ help
+ Do not output any debug BUG messages within the kernel.
+
+config EARLY_PRINTK
+ bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
+ default n
+ help
+ If you want to use the serdes driver (console=ttyUS0) for
+ early printk, you must also supply an additional kernel boot
+ parameter like this:
+
+ serdes=ioportaddr,irq,clockrate,baud
+
+ For an IP7160RGW eval board, you could use this:
+
+ serdes=0x2004000,61,250000000,57600
+
+ which will let you see early printk output at 57600 baud.
+
+config STOP_ON_TRAP
+ bool "Enable stopping at the LDSR for all traps"
+ default n
+ help
+ Cause the LDSR to stop all threads whenever a trap is about to be serviced
+
+config STOP_ON_BUG
+ bool "Enable stopping on failed BUG_ON()"
+ default n
+ help
+ Cause all BUG_ON failures to stop all threads
+
+config DEBUG_IRQMEASURE
+ bool "Enable IRQ handler measurements"
+ default n
+ help
+ When enabled each IRQ's min/avg/max times will be printed. If the handler
+ re-enables interrupt, the times will show the full time including to service
+ nested interrupts. See /proc/irq_measurements.
+
+config DEBUG_PCIMEASURE
+ bool "Enable PCI transaction measurements"
+ default n
+ help
+ When enabled the system will measure the min/avg/max timer for each PCI transactions.
+ See /proc/pci_measurements.
+
+config ACCESS_OK_CHECKS_ENABLED
+ bool "Enable user space access checks"
+ default n
+ help
+ Enabling this check causes the kernel to verify that addresses passed
+ to the kernel by the user space code are within the processes
+ address space. On a no-mmu system, this is done by examining the
+ processes memory data structures (adversly affecting performance) but
+ ensuring that a process does not ask the kernel to violate another
+ processes address space. Sadly, the kernel uses access_ok() for
+ address that are in the kernel which results in a large volume of
+ false positives.
+
+choice
+ prompt "Unaligned Access Support"
+ default UNALIGNED_ACCESS_ENABLED
+ help
+ Kernel / Userspace unaligned access handling.
+
+config UNALIGNED_ACCESS_ENABLED
+ bool "Kernel and Userspace"
+ help
+
+config UNALIGNED_ACCESS_USERSPACE_ONLY
+ bool "Userspace Only"
+ help
+
+config UNALIGNED_ACCESS_DISABLED
+ bool "Disabled"
+ help
+
+endchoice
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ default n
+ depends on DEBUG_KERNEL
+ help
+ This option will cause messages to be printed if free kernel stack space
+ drops below a certain limit (THREAD_SIZE /8).
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ default n
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free kernel stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+source "lib/Kconfig.debug"
+
+endmenu
+
--- /dev/null
+++ b/arch/ubicom32/kernel/asm-offsets.c
@@ -0,0 +1,162 @@
+/*
+ * arch/ubicom32/kernel/asm-offsets.c
+ * Ubicom32 architecture definitions needed by assembly language modules.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+ /* offsets into the task struct */
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+ /* offsets into the kernel_stat struct */
+ DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
+
+ /* offsets into the thread struct */
+ DEFINE(THREAD_D10, offsetof(struct thread_struct, d10));
+ DEFINE(THREAD_D11, offsetof(struct thread_struct, d11));
+ DEFINE(THREAD_D12, offsetof(struct thread_struct, d12));
+ DEFINE(THREAD_D13, offsetof(struct thread_struct, d13));
+ DEFINE(THREAD_A1, offsetof(struct thread_struct, a1));
+ DEFINE(THREAD_A2, offsetof(struct thread_struct, a2));
+ DEFINE(THREAD_A5, offsetof(struct thread_struct, a5));
+ DEFINE(THREAD_A6, offsetof(struct thread_struct, a6));
+ DEFINE(THREAD_SP, offsetof(struct thread_struct, sp));
+
+ /* offsets into the pt_regs */
+ DEFINE(PT_D0, offsetof(struct pt_regs, dn[0]));
+ DEFINE(PT_D1, offsetof(struct pt_regs, dn[1]));
+ DEFINE(PT_D2, offsetof(struct pt_regs, dn[2]));
+ DEFINE(PT_D3, offsetof(struct pt_regs, dn[3]));
+ DEFINE(PT_D4, offsetof(struct pt_regs, dn[4]));
+ DEFINE(PT_D5, offsetof(struct pt_regs, dn[5]));
+ DEFINE(PT_D6, offsetof(struct pt_regs, dn[6]));
+ DEFINE(PT_D7, offsetof(struct pt_regs, dn[7]));
+ DEFINE(PT_D8, offsetof(struct pt_regs, dn[8]));
+ DEFINE(PT_D9, offsetof(struct pt_regs, dn[9]));
+ DEFINE(PT_D10, offsetof(struct pt_regs, dn[10]));
+ DEFINE(PT_D11, offsetof(struct pt_regs, dn[11]));
+ DEFINE(PT_D12, offsetof(struct pt_regs, dn[12]));
+ DEFINE(PT_D13, offsetof(struct pt_regs, dn[13]));
+ DEFINE(PT_D14, offsetof(struct pt_regs, dn[14]));
+ DEFINE(PT_D15, offsetof(struct pt_regs, dn[15]));
+ DEFINE(PT_A0, offsetof(struct pt_regs, an[0]));
+ DEFINE(PT_A1, offsetof(struct pt_regs, an[1]));
+ DEFINE(PT_A2, offsetof(struct pt_regs, an[2]));
+ DEFINE(PT_A3, offsetof(struct pt_regs, an[3]));
+ DEFINE(PT_A4, offsetof(struct pt_regs, an[4]));
+ DEFINE(PT_A5, offsetof(struct pt_regs, an[5]));
+ DEFINE(PT_A6, offsetof(struct pt_regs, an[6]));
+ DEFINE(PT_A7, offsetof(struct pt_regs, an[7]));
+ DEFINE(PT_SP, offsetof(struct pt_regs, an[7]));
+
+ DEFINE(PT_ACC0HI, offsetof(struct pt_regs, acc0[0]));
+ DEFINE(PT_ACC0LO, offsetof(struct pt_regs, acc0[1]));
+ DEFINE(PT_MAC_RC16, offsetof(struct pt_regs, mac_rc16));
+
+ DEFINE(PT_ACC1HI, offsetof(struct pt_regs, acc1[0]));
+ DEFINE(PT_ACC1LO, offsetof(struct pt_regs, acc1[1]));
+
+ DEFINE(PT_SOURCE3, offsetof(struct pt_regs, source3));
+ DEFINE(PT_INST_CNT, offsetof(struct pt_regs, inst_cnt));
+ DEFINE(PT_CSR, offsetof(struct pt_regs, csr));
+ DEFINE(PT_DUMMY_UNUSED, offsetof(struct pt_regs, dummy_unused));
+
+ DEFINE(PT_INT_MASK0, offsetof(struct pt_regs, int_mask0));
+ DEFINE(PT_INT_MASK1, offsetof(struct pt_regs, int_mask1));
+
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+
+ DEFINE(PT_TRAP_CAUSE, offsetof(struct pt_regs, trap_cause));
+
+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
+
+ DEFINE(PT_FRAME_TYPE, offsetof(struct pt_regs, frame_type));
+
+ DEFINE(PT_ORIGINAL_D0, offsetof(struct pt_regs, original_dn_0));
+ DEFINE(PT_PREVIOUS_PC, offsetof(struct pt_regs, previous_pc));
+
+ /* offsets into the kernel_stat struct */
+ DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
+
+ /* signal defines */
+ DEFINE(SIGSEGV, SIGSEGV);
+ //DEFINE(SEGV_MAPERR, SEGV_MAPERR);
+ DEFINE(SIGTRAP, SIGTRAP);
+ //DEFINE(TRAP_TRACE, TRAP_TRACE);
+
+ DEFINE(PT_PTRACED, PT_PTRACED);
+ DEFINE(PT_DTRACE, PT_DTRACE);
+
+ DEFINE(ASM_THREAD_SIZE, THREAD_SIZE);
+
+ /* Offsets in thread_info structure */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(TI_INTR_NESTING, offsetof(struct thread_info, interrupt_nesting));
+ DEFINE(ASM_TIF_NEED_RESCHED, TIF_NEED_RESCHED);
+ DEFINE(ASM_TIF_SYSCALL_TRACE, TIF_SYSCALL_TRACE);
+ DEFINE(ASM_TIF_SIGPENDING, TIF_SIGPENDING);
+
+ DEFINE(ASM_RAM_END, (CONFIG_RAMBASE + CONFIG_RAMSIZE));
+ return 0;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/devtree.c
@@ -0,0 +1,173 @@
+/*
+ * arch/ubicom32/kernel/devtree.c
+ * Ubicom32 architecture device tree implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/devtree.h>
+
+/*
+ * The device tree.
+ */
+struct devtree_node *devtree;
+
+/*
+ * devtree_print()
+ * Print the device tree.
+ */
+void devtree_print(void)
+{
+ struct devtree_node *p = devtree;
+ printk(KERN_INFO "Device Tree:\n");
+ while (p) {
+ if (p->magic != DEVTREE_NODE_MAGIC) {
+ printk(KERN_EMERG
+ "device tree has improper node: %p\n", p);
+ return;
+ }
+ printk(KERN_INFO "\t%p: sendirq=%03d, recvirq=%03d, "
+ " name=%s\n", p, p->sendirq, p->recvirq, p->name);
+ p = p->next;
+ }
+}
+EXPORT_SYMBOL(devtree_print);
+
+/*
+ * devtree_irq()
+ * Return the IRQ(s) associated with devtree node.
+ */
+int devtree_irq(struct devtree_node *dn,
+ unsigned char *sendirq,
+ unsigned char *recvirq)
+{
+ if (dn->magic != DEVTREE_NODE_MAGIC) {
+ printk(KERN_EMERG "improper node: %p\n", dn);
+ if (sendirq) {
+ *sendirq = DEVTREE_IRQ_NONE;
+ }
+ if (recvirq) {
+ *recvirq = DEVTREE_IRQ_NONE;
+ }
+ return -EFAULT;
+ }
+
+ /*
+ * Copy the devtree irq(s) to the output parameters.
+ */
+ if (sendirq) {
+ *sendirq = dn->sendirq;
+ }
+ if (recvirq) {
+ *recvirq = dn->recvirq;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(devtree_irq);
+
+/*
+ * devtree_find_next()
+ * Provide an iterator for walking the device tree.
+ */
+struct devtree_node *devtree_find_next(struct devtree_node **cur)
+{
+ struct devtree_node *p = *cur;
+ if (!p) {
+ *cur = devtree;
+ return devtree;
+ }
+ p = p->next;
+ *cur = p;
+ return p;
+}
+
+/*
+ * devtree_find_by_irq()
+ * Return the node associated with a given irq.
+ */
+struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq)
+{
+ struct devtree_node *p = devtree;
+
+ if (sendirq == recvirq) {
+ printk(KERN_EMERG "identical request makes no sense sendirq = "
+ "%d, recvirq= %d\n", sendirq, recvirq);
+ return NULL;
+ }
+
+ while (p) {
+ if (p->magic != DEVTREE_NODE_MAGIC) {
+ printk(KERN_EMERG
+ "device tree has improper node: %p\n", p);
+ return NULL;
+ }
+
+ /*
+ * See if we can find a match on the IRQ(s) specified.
+ */
+ if ((sendirq == p->sendirq) && (recvirq == p->recvirq)) {
+ return p;
+ }
+
+ if ((sendirq == DEVTREE_IRQ_DONTCARE) &&
+ (p->recvirq == recvirq)) {
+ return p;
+ }
+
+ if ((recvirq == DEVTREE_IRQ_DONTCARE) &&
+ (p->sendirq == sendirq)) {
+ return p;
+ }
+
+ p = p->next;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(devtree_find_by_irq);
+
+/*
+ * devtree_find_node()
+ * Find a node in the device tree by name.
+ */
+struct devtree_node *devtree_find_node(const char *str)
+{
+ struct devtree_node *p = devtree;
+ while (p) {
+ if (p->magic != DEVTREE_NODE_MAGIC) {
+ printk(KERN_EMERG
+ "device tree has improper node: %p\n", p);
+ return NULL;
+ }
+ if (strcmp(p->name, str) == 0) {
+ return p;
+ }
+ p = p->next;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(devtree_find_node);
--- /dev/null
+++ b/arch/ubicom32/kernel/dma.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ubicom32/kernel/dma.c
+ * Ubicom32 architecture dynamic DMA mapping support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * We never have any address translations to worry about, so this
+ * is just alloc/free.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ void *ret;
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || (*dev->dma_mask < 0xffffffff))
+ gfp |= GFP_DMA;
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+ return ret;
+}
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ free_pages((unsigned long)vaddr, get_order(size));
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/flat.c
@@ -0,0 +1,206 @@
+/*
+ * arch/ubicom32/kernel/flat.c
+ * Ubicom32 architecture flat executable format support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/flat.h>
+
+unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp,
+ u32_t relval,
+ u32_t flags,
+ unsigned long *persistent)
+{
+ u32_t relval_reloc_type = relval >> 27;
+ u32_t insn = *rp;
+
+ if (*persistent) {
+ /*
+ * relval holds the relocation that has to be adjusted.
+ */
+ if (relval == 0) {
+ *persistent = 0;
+ }
+
+ return relval;
+ }
+
+ if (relval_reloc_type == R_UBICOM32_32) {
+ /*
+ * insn holds the relocation
+ */
+ return insn;
+ }
+
+ /*
+ * We don't know this one.
+ */
+ return 0;
+}
+
+void ubicom32_flat_put_addr_at_rp(unsigned long *rp,
+ u32_t val,
+ u32_t relval,
+ unsigned long *persistent)
+{
+ u32_t reloc_type = (relval >> 27) & 0x1f;
+ u32_t insn = *rp;
+
+ /*
+ * If persistent is set then it contains the relocation type.
+ */
+ if (*persistent) {
+ /*
+ * If persistent is set then it contains the relocation type.
+ */
+ reloc_type = (*persistent >> 27) & 0x1f;
+ }
+
+ switch (reloc_type) {
+ case R_UBICOM32_32:
+ /*
+ * Store the 32 bits as is.
+ */
+ *rp = val;
+ break;
+ case R_UBICOM32_HI24:
+ {
+ /*
+ * 24 bit relocation that is part of the MOVEAI
+ * instruction. The 24 bits come from bits 7 - 30 of the
+ * relocation. The 24 bits eventually get split into 2
+ * fields in the instruction encoding.
+ *
+ * - Bits 7 - 27 of the relocation are encoded into bits
+ * 0 - 20 of the instruction.
+ *
+ * - Bits 28 - 30 of the relocation are encoded into bit
+ * 24 - 26 of the instruction.
+ */
+ u32_t mask = 0x1fffff | (0x7 << 24);
+ u32_t valid24bits = (val >> 7) & 0xffffff;
+ u32_t bot_21 = valid24bits & 0x1fffff;
+ u32_t upper_3_bits = ((valid24bits & 0xe00000) << 3);
+ insn &= ~mask;
+
+ insn |= bot_21;
+ insn |= upper_3_bits;
+ *rp = insn;
+ }
+ break;
+ case R_UBICOM32_LO7_S:
+ case R_UBICOM32_LO7_2_S:
+ case R_UBICOM32_LO7_4_S:
+ {
+ /*
+ * Bits 0 - 6 of the relocation are encoded into the
+ * 7bit unsigned immediate fields of the SOURCE-1 field
+ * of the instruction. The immediate value is left
+ * shifted by (0, 1, 2) based on the operand size.
+ */
+ u32_t mask = 0x1f | (0x3 << 8);
+ u32_t bottom, top;
+ val &= 0x7f;
+ if (reloc_type == R_UBICOM32_LO7_2_S) {
+ val >>= 1;
+ } else if (reloc_type == R_UBICOM32_LO7_4_S) {
+ val >>= 2;
+ }
+
+ bottom = val & 0x1f;
+ top = val >> 5;
+ insn &= ~mask;
+ insn |= bottom;
+ insn |= (top << 8);
+ BUG_ON(*rp != insn);
+ *rp = insn;
+ break;
+ }
+ case R_UBICOM32_LO7_D:
+ case R_UBICOM32_LO7_2_D:
+ case R_UBICOM32_LO7_4_D:
+ {
+ /*
+ * Bits 0 - 6 of the relocation are encoded into the
+ * 7bit unsigned immediate fields of the DESTINATION
+ * field of the instruction. The immediate value is
+ * left shifted by (0, 1, 2) based on the operand size.
+ */
+ u32_t mask = (0x1f | (0x3 << 8)) << 16;
+ u32_t bottom, top;
+ val &= 0x7f;
+ if (reloc_type == R_UBICOM32_LO7_2_D) {
+ val >>= 1;
+ } else if (reloc_type == R_UBICOM32_LO7_4_D) {
+ val >>= 2;
+ }
+ bottom = (val & 0x1f) << 16;
+ top = (val >> 5) << 16;
+ insn &= ~mask;
+ insn |= bottom;
+ insn |= (top << 8);
+ BUG_ON(*rp != insn);
+ *rp = insn;
+ break;
+ }
+ case R_UBICOM32_LO7_CALLI:
+ case R_UBICOM32_LO16_CALLI:
+ {
+ /*
+ * Extract the offset for a CALLI instruction. The
+ * offsets can be either 7 bits or 18 bits. Since all
+ * instructions in ubicom32 architecture are at work
+ * aligned addresses the truncated offset is right
+ * shifted by 2 before being encoded in the instruction.
+ */
+ if (reloc_type == R_UBICOM32_LO7_CALLI) {
+ val &= 0x7f;
+ } else {
+ val &= 0x3ffff;
+ }
+
+ val >>= 2;
+
+ insn &= ~0x071f071f;
+ insn |= (val & 0x1f) << 0;
+ val >>= 5;
+ insn |= (val & 0x07) << 8;
+ val >>= 3;
+ insn |= (val & 0x1f) << 16;
+ val >>= 5;
+ insn |= (val & 0x07) << 24;
+ if (reloc_type == R_UBICOM32_LO7_CALLI) {
+ BUG_ON(*rp != insn);
+ }
+ *rp = insn;
+ }
+ break;
+ }
+
+ if (*persistent) {
+ *persistent = 0;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/head.S
@@ -0,0 +1,247 @@
+/*
+ * arch/ubicom32/kernel/head.S
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page_offset.h>
+#define __ASM__
+#include <asm/ip5000.h>
+
+
+#define SRC_AN A3
+#define DST_AN A4
+
+#define PARAM_DN D0
+#define TMP_DN D15
+#define TMP2_DN D14
+
+/*
+ * The following code is placed at the start of the Linux section of memory.
+ * This is the primary entry point for Linux.
+ *
+ * However, we also want the syscall entry/exit code to be at a fixed address.
+ * So we take the primary entry point and reserve 16 bytes. That address is
+ * where the system_call entry point exists. This 16 bytes basically allows
+ * us to jump around the system_call entry point code to the actual startup
+ * code.
+ *
+ * Linux Memory Map (see vlinux.lds.S):
+ * 0x40400000 - Primary Entry Point for Linux (jump around code below).
+ * 0x40400010 - Syscall Entry Point.
+ */
+
+ .sect .skip_syscall, "ax", @progbits
+ .global __skip_syscall_section
+__skip_syscall_section:
+ moveai A3, #%hi(_start)
+ lea.1 A3, %lo(_start)(A3)
+ ret A3
+/*
+ * __os_node_offset contains the offset from KERNELBASE to the os_node, it is
+ * not intended to be used by anything except the boot code.
+ */
+__os_node_offset:
+.long (_os_node - CONFIG_KERNELBASE)
+
+.text
+.global _start
+
+/*
+ * start()
+ * This is the start of the Linux kernel.
+ */
+_start:
+ move.4 SCRATCHPAD1, #0
+
+
+/*
+ * Setup the range registers... the loader has setup a few, but we will go ahead
+ * and correct them for our own limits. Note that once set these are never
+ * changed again. The ranges are as follows
+ *
+ * D_RANGE0 - io block (set up by loaded)
+ *
+ * I_RANGE0 and D_RANGE1 - kernel/ultra loader address space bottom of ocm-> top
+ * of ram typically 0x3ffc0000 - 0x440000000
+ * I_RANGE1 - kernel / userspace transition area (aka syscalls, context switches)
+ * typically 0x40400000 - ~0x40400400
+ * I_RANGE2 / D_RANGE2 - slab area
+ * typically 0x40A00000 - ~0x44000000
+ *
+ * I_RANGE4, D_RANGE3, D_RANGE3 - unused.
+ */
+ moveai SRC_AN, #%hi(PAGE_OFFSET_RAW)
+ lea.4 SRC_AN, %lo(PAGE_OFFSET_RAW)(SRC_AN)
+ move.4 D_RANGE1_LO, SRC_AN
+ move.4 I_RANGE0_LO, SRC_AN
+
+; don't try to calculate I_RANGE_HI, see below
+; moveai SRC_AN, #%hi(___init_end-4)
+; lea.4 SRC_AN, %lo(___init_end-4)(SRC_AN)
+; move.4 I_RANGE0_HI, SRC_AN
+
+ moveai SRC_AN, #%hi(CONFIG_RAMBASE+CONFIG_RAMSIZE-4)
+ lea.4 SRC_AN, %lo(CONFIG_RAMBASE+CONFIG_RAMSIZE-4)(SRC_AN)
+ move.4 D_RANGE1_HI, SRC_AN
+
+; for now allow the whole ram to be executable as well so we don't run into problems
+; once we load user more code.
+ move.4 I_RANGE0_HI, SRC_AN
+
+#ifdef CONFIG_PROTECT_KERNEL
+; when kernel protection is enabled, we only open up syscall and non kernel text
+; for userspace apps, for now only irange registers registers 1 and 2 are used for userspace.
+
+ ;; syscall range
+ moveai SRC_AN, #%hi(_begin)
+ lea.4 SRC_AN, %lo(_begin)(SRC_AN)
+ move.4 I_RANGE1_LO, SRC_AN
+ moveai SRC_AN, #%hi(__fixed_text_end)
+ lea.4 SRC_AN, %lo(__fixed_text_end)(SRC_AN)
+ move.4 I_RANGE1_HI, SRC_AN
+
+ ;; slab instructions
+ moveai SRC_AN, #%hi(_edata)
+ lea.4 SRC_AN, %lo(_edata)(SRC_AN)
+ move.4 I_RANGE2_LO, SRC_AN
+ ;; End of DDR is already in range0 hi so just copy it.
+ move.4 I_RANGE2_HI, I_RANGE0_HI
+
+ ;; slab data (same as slab instructions but starting a little earlier).
+ moveai SRC_AN, #%hi(_data_protection_end)
+ lea.4 SRC_AN, %lo(_data_protection_end)(SRC_AN)
+ move.4 D_RANGE2_LO, SRC_AN
+ move.4 D_RANGE2_HI, I_RANGE0_HI
+
+;; enable ranges
+ ;; skip I_RANGE0_EN
+ move.4 I_RANGE1_EN, #-1
+ move.4 I_RANGE2_EN, #-1
+ move.4 I_RANGE3_EN, #0
+
+ ;; skip D_RANGE0_EN or D_RANGE1_EN
+ move.4 D_RANGE2_EN, #-1
+ move.4 D_RANGE3_EN, #0
+ move.4 D_RANGE4_EN, #0
+#endif
+
+;
+; If __ocm_free_begin is smaller than __ocm_free_end the
+; setup OCM text and data ram banks properly
+;
+ moveai DST_AN, #%hi(__ocm_free_begin)
+ lea.4 TMP_DN, %lo(__ocm_free_begin)(DST_AN)
+ moveai DST_AN, #%hi(__ocm_free_end)
+ lea.4 TMP2_DN, %lo(__ocm_free_end)(DST_AN)
+ sub.4 #0, TMP2_DN, TMP_DN
+ jmple.f 2f
+ moveai DST_AN, #%hi(__data_begin)
+ lea.4 TMP_DN, %lo(__data_begin)(DST_AN)
+ moveai DST_AN, #%hi(OCMSTART)
+ lea.4 TMP2_DN, %lo(OCMSTART)(DST_AN)
+ sub.4 TMP_DN, TMP_DN, TMP2_DN
+ lsr.4 TMP_DN, TMP_DN, #15
+ lsl.4 TMP_DN, #1, TMP_DN
+ moveai DST_AN, #%hi(OCMC_BASE)
+ add.4 OCMC_BANK_MASK(DST_AN), #-1, TMP_DN
+ pipe_flush 0
+2:
+;
+; Load .ocm_text
+;
+ moveai DST_AN, #%hi(__ocm_text_run_end)
+ lea.4 TMP_DN, %lo(__ocm_text_run_end)(DST_AN)
+ moveai DST_AN, #%hi(__ocm_text_run_begin)
+ lea.4 DST_AN, %lo(__ocm_text_run_begin)(DST_AN)
+ moveai SRC_AN, #%hi(__ocm_text_load_begin)
+ lea.4 SRC_AN, %lo(__ocm_text_load_begin)(SRC_AN)
+ jmpt.t 2f
+
+1: move.4 (DST_AN)4++, (SRC_AN)4++
+
+2: sub.4 #0, DST_AN, TMP_DN
+ jmpne.t 1b
+
+;
+; Load .ocm_data
+;
+ moveai DST_AN, #%hi(__ocm_data_run_end)
+ lea.4 TMP_DN, %lo(__ocm_data_run_end)(DST_AN)
+ moveai DST_AN, #%hi(__ocm_data_run_begin)
+ lea.4 DST_AN, %lo(__ocm_data_run_begin)(DST_AN)
+ moveai SRC_AN, #%hi(__ocm_data_load_begin)
+ lea.4 SRC_AN, %lo(__ocm_data_load_begin)(SRC_AN)
+ jmpt.t 2f
+
+1: move.4 (DST_AN)4++, (SRC_AN)4++
+
+2: sub.4 #0, DST_AN, TMP_DN
+ jmpne.t 1b
+
+; Clear .bss
+;
+ moveai SRC_AN, #%hi(_ebss)
+ lea.4 TMP_DN, %lo(_ebss)(SRC_AN)
+ moveai DST_AN, #%hi(_sbss)
+ lea.4 DST_AN, %lo(_sbss)(DST_AN)
+ jmpt.t 2f
+
+1: move.4 (DST_AN)4++, #0
+
+2: sub.4 #0, DST_AN, TMP_DN
+ jmpne.t 1b
+
+; save our parameter to devtree (after clearing .bss)
+ moveai DST_AN, #%hi(devtree)
+ lea.4 DST_AN, %lo(devtree)(DST_AN)
+ move.4 (DST_AN), PARAM_DN
+
+ moveai sp, #%hi(init_thread_union)
+ lea.4 sp, %lo(init_thread_union)(sp)
+ movei TMP_DN, #ASM_THREAD_SIZE
+ add.4 sp, sp, TMP_DN
+ move.4 -4(sp)++, #0 ; nesting level = 0
+ move.4 -4(sp)++, #1 ; KERNEL_THREAD
+
+;; ip3k-elf-gdb backend now sets scratchpad3 to 1 when either continue
+;; or single step commands are issued. scratchpad3 is set to 0 when the
+;; debugger detaches from the board.
+ move.4 TMP_DN, scratchpad3
+ lsl.4 TMP_DN, TMP_DN, #0x0
+ jmpeq.f _jump_to_start_kernel
+_ok_to_set_break_points_in_linux:
+;; THREAD_STALL
+ move.4 mt_dbg_active_clr,#-1
+;; stalling the threads isn't instantaneous.. need to flush the pipe.
+ pipe_flush 0
+ pipe_flush 0
+
+_jump_to_start_kernel:
+ moveai SRC_AN, #%hi(start_kernel)
+ lea.4 SRC_AN, %lo(start_kernel)(SRC_AN)
+ ret SRC_AN
--- /dev/null
+++ b/arch/ubicom32/kernel/init_task.c
@@ -0,0 +1,62 @@
+/*
+ * arch/ubicom32/kernel/init_task.c
+ * Ubicom32 architecture task initialization implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
--- /dev/null
+++ b/arch/ubicom32/kernel/irq.c
@@ -0,0 +1,596 @@
+/*
+ * arch/ubicom32/kernel/irq.c
+ * Ubicom32 architecture IRQ support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/ldsr.h>
+#include <asm/ip5000.h>
+#include <asm/machdep.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread.h>
+#include <asm/devtree.h>
+
+unsigned int irq_soft_avail;
+static struct irqaction ubicom32_reserve_action[NR_IRQS];
+
+#if !defined(CONFIG_DEBUG_IRQMEASURE)
+#define IRQ_DECLARE_MEASUREMENT
+#define IRQ_MEASUREMENT_START()
+#define IRQ_MEASUREMENT_END(irq)
+#else
+#define IRQ_DECLARE_MEASUREMENT \
+ int __diff; \
+ unsigned int __tstart;
+
+#define IRQ_MEASUREMENT_START() \
+ __tstart = UBICOM32_IO_TIMER->sysval;
+
+#define IRQ_MEASUREMENT_END(irq) \
+ __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
+ irq_measurement_update((irq), __diff);
+
+/*
+ * We keep track of the time spent in both irq_enter()
+ * and irq_exit().
+ */
+#define IRQ_WEIGHT 32
+
+struct irq_measurement {
+ volatile unsigned int min;
+ volatile unsigned int avg;
+ volatile unsigned int max;
+};
+
+static DEFINE_SPINLOCK(irq_measurement_lock);
+
+/*
+ * Add 1 in for softirq (irq_exit());
+ */
+static struct irq_measurement irq_measurements[NR_IRQS + 1];
+
+/*
+ * irq_measurement_update()
+ * Update an entry in the measurement array for this irq.
+ */
+static void irq_measurement_update(int irq, int sample)
+{
+ struct irq_measurement *im = &irq_measurements[irq];
+ spin_lock(&irq_measurement_lock);
+ if ((im->min == 0) || (im->min > sample)) {
+ im->min = sample;
+ }
+ if (im->max < sample) {
+ im->max = sample;
+ }
+ im->avg = ((im->avg * (IRQ_WEIGHT - 1)) + sample) / IRQ_WEIGHT;
+ spin_unlock(&irq_measurement_lock);
+}
+#endif
+
+/*
+ * irq_kernel_stack_check()
+ * See if the kernel stack is within STACK_WARN of the end.
+ */
+static void irq_kernel_stack_check(int irq, struct pt_regs *regs)
+{
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ unsigned long sp;
+
+ /*
+ * Make sure that we are not close to the top of the stack and thus
+ * can not really service this interrupt.
+ */
+ asm volatile (
+ "and.4 %0, SP, %1 \n\t"
+ : "=d" (sp)
+ : "d" (THREAD_SIZE - 1)
+ : "cc"
+ );
+
+ if (sp < (sizeof(struct thread_info) + STACK_WARN)) {
+ printk(KERN_WARNING
+ "cpu[%d]: possible overflow detected sp remain: %p, "
+ "irq: %d, regs: %p\n",
+ thread_get_self(), (void *)sp, irq, regs);
+ dump_stack();
+ }
+
+ if (sp < (sizeof(struct thread_info) + 16)) {
+ THREAD_STALL;
+ }
+#endif
+}
+
+/*
+ * irq_get_lsb()
+ * Get the LSB set in value
+ */
+static int irq_get_lsb(unsigned int value)
+{
+ static unsigned char irq_bits[8] = {
+ 3, 0, 1, 0, 2, 0, 1, 0
+ };
+ u32_t nextbit = 0;
+
+ value = (value >> nextbit) | (value << ((sizeof(value) * 8) - nextbit));
+
+ /*
+ * It's unlikely that we find that we execute the body of this while
+ * loop. 50% of the time we won't take this at all and then of the
+ * cases where we do about 50% of those we only execute once.
+ */
+ if (!(value & 0xffff)) {
+ nextbit += 0x10;
+ value >>= 16;
+ }
+
+ if (!(value & 0xff)) {
+ nextbit += 0x08;
+ value >>= 8;
+ }
+
+ if (!(value & 0xf)) {
+ nextbit += 0x04;
+ value >>= 4;
+ }
+
+ nextbit += irq_bits[value & 0x7];
+ if (nextbit > 63) {
+ panic("nextbit out of range: %d\n", nextbit);
+ }
+ return nextbit;
+}
+
+/*
+ * ubicom32_reserve_handler()
+ * Bogus handler associated with pre-reserved IRQ(s).
+ */
+static irqreturn_t ubicom32_reserve_handler(int irq, void *dev_id)
+{
+ BUG();
+ return IRQ_HANDLED;
+}
+
+/*
+ * __irq_disable_vector()
+ * Disable the interrupt by clearing the appropriate bit in the
+ * LDSR Mask Register.
+ */
+static void __irq_disable_vector(unsigned int irq)
+{
+ ldsr_disable_vector(irq);
+}
+
+/*
+ * __irq_ack_vector()
+ * Acknowledge the specific interrupt by clearing the associate bit in
+ * hardware
+ */
+static void __irq_ack_vector(unsigned int irq)
+{
+ if (irq < 32) {
+ asm volatile ("move.4 INT_CLR0, %0" : : "d" (1 << irq));
+ } else {
+ asm volatile ("move.4 INT_CLR1, %0" : : "d" (1 << (irq - 32)));
+ }
+}
+
+/*
+ * __irq_enable_vector()
+ * Clean and then enable the interrupt by setting the appropriate bit in
+ * the LDSR Mask Register.
+ */
+static void __irq_enable_vector(unsigned int irq)
+{
+ /*
+ * Acknowledge, really clear the vector.
+ */
+ __irq_ack_vector(irq);
+ ldsr_enable_vector(irq);
+}
+
+/*
+ * __irq_mask_vector()
+ */
+static void __irq_mask_vector(unsigned int irq)
+{
+ ldsr_mask_vector(irq);
+}
+
+/*
+ * __irq_unmask_vector()
+ */
+static void __irq_unmask_vector(unsigned int irq)
+{
+ ldsr_unmask_vector(irq);
+}
+
+/*
+ * __irq_end_vector()
+ * Called once an interrupt is completed (reset the LDSR mask).
+ */
+static void __irq_end_vector(unsigned int irq)
+{
+ ldsr_unmask_vector(irq);
+}
+
+#if defined(CONFIG_SMP)
+/*
+ * __irq_set_affinity()
+ * Set the cpu affinity for this interrupt.
+ */
+static void __irq_set_affinity(unsigned int irq, cpumask_t dest)
+{
+ smp_set_affinity(irq, dest);
+ irq_desc[irq].affinity = dest;
+}
+#endif
+
+/*
+ * On-Chip Generic Interrupt function handling.
+ */
+static struct irq_chip ubicom32_irq_chip = {
+ .name = "Ubicom32",
+ .startup = NULL,
+ .shutdown = NULL,
+ .enable = __irq_enable_vector,
+ .disable = __irq_disable_vector,
+ .ack = __irq_ack_vector,
+ .mask = __irq_mask_vector,
+ .unmask = __irq_unmask_vector,
+ .end = __irq_end_vector,
+#if defined(CONFIG_SMP)
+ .set_affinity = __irq_set_affinity,
+#endif
+};
+
+/*
+ * do_IRQ()
+ * Primary interface for handling IRQ() requests.
+ */
+asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
+{
+ struct pt_regs *oldregs;
+ struct thread_info *ti;
+ unsigned long sp;
+
+ IRQ_DECLARE_MEASUREMENT;
+
+ oldregs = set_irq_regs(regs);
+
+ /*
+ * Before we call the handler and potentially enable
+ * interrupts, track the nesting level.
+ */
+ asm volatile (
+ "and.4 %0, SP, %1 \n\t"
+ : "=d" (sp)
+ : "d" (~(THREAD_SIZE - 1))
+ : "cc"
+ );
+ ti = (struct thread_info *)sp;
+ ti->interrupt_nesting++;
+
+ /*
+ * Check for possible stack overflow on the kernel stack.
+ */
+ irq_kernel_stack_check(irq, regs);
+
+ /*
+ * Execute the IRQ handler and any pending SoftIRQ requests.
+ */
+ BUG_ON(!irqs_disabled());
+ irq_enter();
+
+ BUG_ON(!irqs_disabled());
+ IRQ_MEASUREMENT_START();
+ __do_IRQ(irq);
+ IRQ_MEASUREMENT_END(irq);
+ BUG_ON(!irqs_disabled());
+
+ IRQ_MEASUREMENT_START();
+ irq_exit();
+ IRQ_MEASUREMENT_END(NR_IRQS);
+ BUG_ON(!irqs_disabled());
+
+ set_irq_regs(oldregs);
+ ti->interrupt_nesting--;
+}
+
+/*
+ * irq_soft_alloc()
+ * Allocate a soft IRQ.
+ */
+int irq_soft_alloc(unsigned int *soft)
+{
+ if (irq_soft_avail == 0) {
+ printk(KERN_NOTICE "no soft irqs to allocate\n");
+ return -EFAULT;
+ }
+
+ *soft = irq_get_lsb(irq_soft_avail);
+ irq_soft_avail &= ~(1 << *soft);
+ return 0;
+}
+
+/*
+ * ack_bad_irq()
+ * Called to handle an bad irq request.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
+ __irq_end_vector(irq);
+}
+
+/*
+ * show_interrupts()
+ * Return a string that displays the state of each of the interrupts.
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+ struct irqaction *ap;
+ int irq = *((loff_t *) v);
+ int j;
+
+ if (irq >= NR_IRQS) {
+ return 0;
+ }
+
+ if (irq == 0) {
+ seq_puts(p, " ");
+ for_each_online_cpu(j) {
+ seq_printf(p, "CPU%d ", j);
+ }
+ seq_putc(p, '\n');
+ }
+
+ ap = irq_desc[irq].action;
+ if (ap) {
+ seq_printf(p, "%3d: ", irq);
+ for_each_online_cpu(j) {
+ seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
+ }
+ seq_printf(p, "%14s ", irq_desc[irq].chip->name);
+ seq_printf(p, "%s", ap->name);
+ for (ap = ap->next; ap; ap = ap->next) {
+ seq_printf(p, ", %s", ap->name);
+ }
+ seq_putc(p, '\n');
+ }
+ return 0;
+}
+
+#if defined(CONFIG_DEBUG_IRQMEASURE)
+static unsigned int irq_cycles_to_micro(unsigned int cycles, unsigned int frequency)
+{
+ unsigned int micro = (cycles / (frequency / 1000000));
+ return micro;
+}
+
+/*
+ * irq_measurement_show()
+ * Print out the min, avg, max values for each IRQ
+ *
+ * By request, the max value is reset after each dump.
+ */
+static int irq_measurement_show(struct seq_file *p, void *v)
+{
+ struct irqaction *ap;
+ unsigned int freq = processor_frequency();
+ int irq = *((loff_t *) v);
+
+
+ if (irq == 0) {
+ seq_puts(p, "\tmin\tavg\tmax\t(micro-seconds)\n");
+ }
+
+ if (irq > NR_IRQS) {
+ return 0;
+ }
+
+ if (irq == NR_IRQS) {
+ unsigned int min, avg, max;
+ spin_lock(&irq_measurement_lock);
+ min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
+ avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
+ max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
+ irq_measurements[irq].max = 0;
+ spin_unlock(&irq_measurement_lock);
+ seq_printf(p, " \t%u\t%u\t%u\tsoftirq\n", min, avg, max);
+ return 0;
+ }
+
+ ap = irq_desc[irq].action;
+ if (ap) {
+ unsigned int min, avg, max;
+ spin_lock(&irq_measurement_lock);
+ min = irq_cycles_to_micro(irq_measurements[irq].min, freq);
+ avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq);
+ max = irq_cycles_to_micro(irq_measurements[irq].max, freq);
+ irq_measurements[irq].max = 0;
+ spin_unlock(&irq_measurement_lock);
+ seq_printf(p, "%2u:\t%u\t%u\t%u\t%s\n", irq, min, avg, max, ap->name);
+ }
+ return 0;
+}
+
+static void *irq_measurement_start(struct seq_file *f, loff_t *pos)
+{
+ return (*pos <= NR_IRQS) ? pos : NULL;
+}
+
+static void *irq_measurement_next(struct seq_file *f, void *v, loff_t *pos)
+{
+ (*pos)++;
+ if (*pos > NR_IRQS)
+ return NULL;
+ return pos;
+}
+
+static void irq_measurement_stop(struct seq_file *f, void *v)
+{
+ /* Nothing to do */
+}
+
+static const struct seq_operations irq_measurement_seq_ops = {
+ .start = irq_measurement_start,
+ .next = irq_measurement_next,
+ .stop = irq_measurement_stop,
+ .show = irq_measurement_show,
+};
+
+static int irq_measurement_open(struct inode *inode, struct file *filp)
+{
+ return seq_open(filp, &irq_measurement_seq_ops);
+}
+
+static const struct file_operations irq_measurement_fops = {
+ .open = irq_measurement_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init irq_measurement_init(void)
+{
+ proc_create("irq_measurements", 0, NULL, &irq_measurement_fops);
+ return 0;
+}
+module_init(irq_measurement_init);
+#endif
+
+/*
+ * init_IRQ(void)
+ * Initialize the on-chip IRQ subsystem.
+ */
+void __init init_IRQ(void)
+{
+ int irq;
+ struct devtree_node *p = NULL;
+ struct devtree_node *iter = NULL;
+ unsigned int mask = 0;
+ unsigned int reserved = 0;
+
+ /*
+ * Pull out the list of software interrupts that are avialable to
+ * Linux and provide an allocation function for them. The first
+ * 24 interrupts of INT0 are software interrupts.
+ */
+ irq_soft_avail = 0;
+ if (processor_interrupts(&irq_soft_avail, NULL) < 0) {
+ printk(KERN_WARNING "No Soft IRQ(s) available\n");
+ }
+ irq_soft_avail &= ((1 << 24) - 1);
+
+ /*
+ * Initialize all of the on-chip interrupt handling
+ * to use a common set of interrupt functions.
+ */
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ irq_desc[irq].status = IRQ_DISABLED;
+ irq_desc[irq].action = NULL;
+ irq_desc[irq].depth = 1;
+ set_irq_chip(irq, &ubicom32_irq_chip);
+ }
+
+ /*
+ * The sendirq of a devnode is not registered within Linux but instead
+ * is used by the software I/O thread. These interrupts are reserved.
+ * The recvirq is used by Linux and registered by a device driver, these
+ * are not reserved.
+ *
+ * recvirq(s) that are in the software interrupt range are not supposed
+ * to be marked as reserved. We track this while we scan the device
+ * nodes.
+ */
+ p = devtree_find_next(&iter);
+ while (p) {
+ unsigned char sendirq, recvirq;
+ devtree_irq(p, &sendirq, &recvirq);
+
+ /*
+ * If the sendirq is valid, mark that irq as taken by the
+ * devtree node.
+ */
+ if (sendirq < NR_IRQS) {
+ ubicom32_reserve_action[sendirq].handler =
+ ubicom32_reserve_handler;
+ ubicom32_reserve_action[sendirq].name = p->name;
+ irq_desc[sendirq].action =
+ &ubicom32_reserve_action[sendirq];
+ mask |= (1 << sendirq);
+ }
+
+ /*
+ * Track the relevant recieve IRQ(s)
+ */
+ if (recvirq < 24) {
+ mask |= (1 << recvirq);
+ }
+
+ /*
+ * Move to the next node.
+ */
+ p = devtree_find_next(&iter);
+ }
+
+ /*
+ * Remove these bits from the irq_soft_avail list and then use the
+ * result as the list of pre-reserved IRQ(s).
+ */
+ reserved = ~irq_soft_avail & ~mask;
+ for (irq = 0; irq < 24; irq++) {
+ if ((reserved & (1 << irq))) {
+ ubicom32_reserve_action[irq].handler =
+ ubicom32_reserve_handler;
+ ubicom32_reserve_action[irq].name = "reserved";
+ irq_desc[irq].action = &ubicom32_reserve_action[irq];
+ }
+ }
+
+ /*
+ * Initialize the LDSR which is the Ubicom32 programmable
+ * interrupt controller.
+ */
+ ldsr_init();
+
+ /*
+ * The Ubicom trap code needs a 2nd init after IRQ(s) are setup.
+ */
+ trap_init_interrupt();
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/ldsr.c
@@ -0,0 +1,1176 @@
+/*
+ * arch/ubicom32/kernel/ldsr.c
+ * Ubicom32 architecture Linux Device Services Driver Interface
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * NOTES:
+ *
+ * The LDSR is a programmable interrupt controller that is written in software.
+ * It emulates the behavior of an pic by fielding the interrupts, choosing a
+ * victim thread to take the interrupt and forcing that thread to take a context
+ * switch to the appropriate interrupt handler.
+ *
+ * Because traps are treated as just a special class of interrupts, the LDSR
+ * also handles the processing of traps.
+ *
+ * Because we compile Linux both UP and SMP, we need the LDSR to use
+ * architectural locking that is not "compiled out" when compiling UP. For now,
+ * we use the single atomic bit lock.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/cpumask.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <asm/ip5000.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/asm-offsets.h>
+#include <asm/traps.h>
+#include <asm/thread.h>
+#include <asm/range-protect.h>
+
+/*
+ * One can not print from the LDSR so the best we can do is
+ * check a condition and stall all of the threads.
+ */
+
+// #define DEBUG_LDSR 1
+#if defined(DEBUG_LDSR)
+#define DEBUG_ASSERT(cond) \
+ if (!(cond)) { \
+ THREAD_STALL; \
+ }
+#else
+#define DEBUG_ASSERT(cond)
+#endif
+
+/*
+ * Make global so that we can use it in the RFI code in assembly.
+ */
+unsigned int ldsr_soft_irq_mask;
+EXPORT_SYMBOL(ldsr_soft_irq_mask);
+
+static unsigned int ldsr_suspend_mask;
+static unsigned int ldsr_soft_irq;
+static unsigned int ldsr_stack_space[1024];
+
+static struct ldsr_register_bank {
+ volatile unsigned int enabled0;
+ volatile unsigned int enabled1;
+ volatile unsigned int mask0;
+ volatile unsigned int mask1;
+ unsigned int total;
+ unsigned int retry;
+ unsigned int backout;
+} ldsr_interrupt;
+
+/*
+ * Which thread/cpu are we?
+ */
+static int ldsr_tid = -1;
+
+#if defined(CONFIG_IRQSTACKS)
+/*
+ * per-CPU IRQ stacks (thread information and stack)
+ *
+ * NOTE: Do not use DEFINE_PER_CPU() as it makes it harder
+ * to find the location of ctx from assembly language.
+ */
+union irq_ctx {
+ struct thread_info tinfo;
+ u32 stack[THREAD_SIZE/sizeof(u32)];
+};
+static union irq_ctx *percpu_irq_ctxs[NR_CPUS];
+
+/*
+ * Storage for the interrupt stack.
+ */
+#if !defined(CONFIG_IRQSTACKS_USEOCM)
+static char percpu_irq_stacks[(NR_CPUS * THREAD_SIZE) + (THREAD_SIZE - 1)];
+#else
+/*
+ * For OCM, the linker will ensure that space is allocated for the stack
+ * see (vmlinux.lds.S)
+ */
+static char percpu_irq_stacks[];
+#endif
+
+#endif
+
+/*
+ * Save trap IRQ because we need to un-suspend if it gets set.
+ */
+static unsigned int ldsr_trap_irq_mask;
+static unsigned int ldsr_trap_irq;
+
+/*
+ * ret_from_interrupt_to_kernel
+ * Just restore the context and do nothing else.
+ */
+asmlinkage void ret_from_interrupt_to_kernel(void)__attribute__((naked));
+
+/*
+ * ret_from_interrupt_to_user
+ * Call scheduler if needed. Just restore the context.
+ */
+asmlinkage void ret_from_interrupt_to_user(void)__attribute__((naked));
+
+#ifdef DEBUG_LDSR
+u32_t old_sp, old_pc, old_a0, old_a5, old_a3;
+struct pt_regs copy_regs, *copy_save_area;
+#endif
+
+int __user_mode(unsigned long sp)
+{
+
+ u32_t saved_stack_base = sp & ~(ASM_THREAD_SIZE - 1);
+#if defined(CONFIG_IRQSTACKS_USEOCM)
+ if ((union irq_ctx *)saved_stack_base == percpu_irq_ctxs[smp_processor_id()]) {
+ /*
+ * On the interrupt stack.
+ */
+ return 0;
+ }
+#endif
+
+ if (!(u32_t)current) {
+ return 0;
+ }
+ return saved_stack_base != ((u32_t)current->stack);
+}
+
+/*
+ * ldsr_lock_release()
+ * Release the LDSR lock.
+ */
+static void ldsr_lock_release(void)
+{
+ UBICOM32_UNLOCK(LDSR_LOCK_BIT);
+}
+
+/*
+ * ldsr_lock_acquire()
+ * Acquire the LDSR lock, spin if not available.
+ */
+static void ldsr_lock_acquire(void)
+{
+ UBICOM32_LOCK(LDSR_LOCK_BIT);
+}
+
+/*
+ * ldsr_thread_irq_disable()
+ * Disable interrupts for the specified thread.
+ */
+static void ldsr_thread_irq_disable(unsigned int tid)
+{
+ unsigned int mask = (1 << tid);
+
+ asm volatile (
+ " or.4 scratchpad1, scratchpad1, %0 \n\t"
+ :
+ : "d"(mask)
+ : "cc"
+ );
+}
+
+/*
+ * ldsr_thread_get_interrupts()
+ * Get the interrupt state for all threads.
+ */
+static unsigned long ldsr_thread_get_interrupts(void)
+{
+ unsigned long ret = 0;
+ asm volatile (
+ " move.4 %0, scratchpad1 \n\t"
+ : "=r" (ret)
+ :
+ );
+ return ret;
+}
+
+/*
+ * ldsr_emulate_and_run()
+ * Emulate the instruction and then set the thread to run.
+ */
+static void ldsr_emulate_and_run(unsigned int tid)
+{
+ unsigned int thread_mask = (1 << tid);
+ u32_t write_csr = (tid << 15) | (1 << 14);
+
+ /*
+ * Emulate the unaligned access.
+ */
+ unaligned_emulate(tid);
+
+ /*
+ * Get the thread back in a running state.
+ */
+ asm volatile (
+ " setcsr %0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
+ * register */
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 mt_dbg_active_set, %1 \n\t" /* Activate thread even if
+ * in dbg/fault state */
+ " move.4 mt_active_set, %1 \n\t" /* Restart target
+ * thread. */
+ :
+ : "r" (write_csr), "d" (thread_mask)
+ : "cc"
+ );
+ thread_enable_mask(thread_mask);
+}
+
+/*
+ * ldsr_preemptive_context_save()
+ * save thread context from another hardware thread. The other thread must
+ * be stalled.
+ */
+static inline void ldsr_preemptive_context_save(u32_t thread,
+ struct pt_regs *regs)
+{
+ /*
+ * Save the current state of the specified thread
+ */
+ asm volatile (
+ " move.4 a3, %0 \n\t"
+
+ /* set src1 from the target thread */
+ " move.4 csr, %1 \n\t"
+ " setcsr_flush 0 \n\t"
+ " setcsr_flush 0 \n\t"
+
+ /* copy state from the other thread */
+ " move.4 "D(PT_D0)"(a3), d0 \n\t"
+ " move.4 "D(PT_D1)"(a3), d1 \n\t"
+ " move.4 "D(PT_D2)"(a3), d2 \n\t"
+ " move.4 "D(PT_D3)"(a3), d3 \n\t"
+ " move.4 "D(PT_D4)"(a3), d4 \n\t"
+ " move.4 "D(PT_D5)"(a3), d5 \n\t"
+ " move.4 "D(PT_D6)"(a3), d6 \n\t"
+ " move.4 "D(PT_D7)"(a3), d7 \n\t"
+ " move.4 "D(PT_D8)"(a3), d8 \n\t"
+ " move.4 "D(PT_D9)"(a3), d9 \n\t"
+ " move.4 "D(PT_D10)"(a3), d10 \n\t"
+ " move.4 "D(PT_D11)"(a3), d11 \n\t"
+ " move.4 "D(PT_D12)"(a3), d12 \n\t"
+ " move.4 "D(PT_D13)"(a3), d13 \n\t"
+ " move.4 "D(PT_D14)"(a3), d14 \n\t"
+ " move.4 "D(PT_D15)"(a3), d15 \n\t"
+ " move.4 "D(PT_A0)"(a3), a0 \n\t"
+ " move.4 "D(PT_A1)"(a3), a1 \n\t"
+ " move.4 "D(PT_A2)"(a3), a2 \n\t"
+ " move.4 "D(PT_A3)"(a3), a3 \n\t"
+ " move.4 "D(PT_A4)"(a3), a4 \n\t"
+ " move.4 "D(PT_A5)"(a3), a5 \n\t"
+ " move.4 "D(PT_A6)"(a3), a6 \n\t"
+ " move.4 "D(PT_SP)"(a3), a7 \n\t"
+ " move.4 "D(PT_ACC0HI)"(a3), acc0_hi \n\t"
+ " move.4 "D(PT_ACC0LO)"(a3), acc0_lo \n\t"
+ " move.4 "D(PT_MAC_RC16)"(a3), mac_rc16 \n\t"
+ " move.4 "D(PT_ACC1HI)"(a3), acc1_hi \n\t"
+ " move.4 "D(PT_ACC1LO)"(a3), acc1_lo \n\t"
+ " move.4 "D(PT_SOURCE3)"(a3), source3 \n\t"
+ " move.4 "D(PT_INST_CNT)"(a3), inst_cnt \n\t"
+ " move.4 "D(PT_CSR)"(a3), csr \n\t"
+ " move.4 "D(PT_DUMMY_UNUSED)"(a3), #0 \n\t"
+ " move.4 "D(PT_INT_MASK0)"(a3), int_mask0 \n\t"
+ " move.4 "D(PT_INT_MASK1)"(a3), int_mask1 \n\t"
+ " move.4 "D(PT_TRAP_CAUSE)"(a3), trap_cause \n\t"
+ " move.4 "D(PT_PC)"(a3), pc \n\t"
+ " move.4 "D(PT_PREVIOUS_PC)"(a3), previous_pc \n\t"
+ /* disable csr thread select */
+ " movei csr, #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ :
+ : "r" (regs->dn), "d" ((thread << 9) | (1 << 8))
+ : "a3"
+ );
+}
+
+/*
+ * ldsr_rotate_threads()
+ * Simple round robin algorithm for choosing the next cpu
+ */
+static int ldsr_rotate_threads(unsigned long cpus)
+{
+ static unsigned char ldsr_bits[8] = {
+ 3, 0, 1, 0, 2, 0, 1, 0
+ };
+
+ static int nextbit;
+ int thisbit;
+
+ /*
+ * Move the interrupts down so that we consider interrupts from where
+ * we left off, then take the interrupts we would lose and move them
+ * to the top half of the interrupts value.
+ */
+ cpus = (cpus >> nextbit) | (cpus << ((sizeof(cpus) * 8) - nextbit));
+
+ /*
+ * 50% of the time we won't take this at all and then of the cases where
+ * we do about 50% of those we only execute once.
+ */
+ if (!(cpus & 0xffff)) {
+ nextbit += 16;
+ cpus >>= 16;
+ }
+
+ if (!(cpus & 0xff)) {
+ nextbit += 8;
+ cpus >>= 8;
+ }
+
+ if (!(cpus & 0xf)) {
+ nextbit += 4;
+ cpus >>= 4;
+ }
+
+ nextbit += ldsr_bits[cpus & 0x7];
+ thisbit = (nextbit & ((sizeof(cpus) * 8) - 1));
+ nextbit = (thisbit + 1) & ((sizeof(cpus) * 8) - 1);
+ DEBUG_ASSERT(thisbit < THREAD_ARCHITECTURAL_MAX);
+ return thisbit;
+}
+
+/*
+ * ldsr_rotate_interrupts()
+ * Get rotating next set bit value.
+ */
+static int ldsr_rotate_interrupts(unsigned long long interrupts)
+{
+ static unsigned char ldsr_bits[8] = {
+ 3, 0, 1, 0, 2, 0, 1, 0
+ };
+
+ static int nextbit;
+ int thisbit;
+
+ /*
+ * Move the interrupts down so that we consider interrupts from where
+ * we left off, then take the interrupts we would lose and move them
+ * to the top half of the interrupts value.
+ */
+ interrupts = (interrupts >> nextbit) |
+ (interrupts << ((sizeof(interrupts) * 8) - nextbit));
+
+ /*
+ * 50% of the time we won't take this at all and then of the cases where
+ * we do about 50% of those we only execute once.
+ */
+ if (!(interrupts & 0xffffffff)) {
+ nextbit += 32;
+ interrupts >>= 32;
+ }
+
+ if (!(interrupts & 0xffff)) {
+ nextbit += 16;
+ interrupts >>= 16;
+ }
+
+ if (!(interrupts & 0xff)) {
+ nextbit += 8;
+ interrupts >>= 8;
+ }
+
+ if (!(interrupts & 0xf)) {
+ nextbit += 4;
+ interrupts >>= 4;
+ }
+
+ nextbit += ldsr_bits[interrupts & 0x7];
+ thisbit = (nextbit & ((sizeof(interrupts) * 8) - 1));
+ nextbit = (thisbit + 1) & ((sizeof(interrupts) * 8) - 1);
+
+ DEBUG_ASSERT(thisbit < (sizeof(interrupts) * 8));
+ return thisbit;
+}
+
+/*
+ * ldsr_backout_or_irq()
+ *
+ * One way or the other this interrupt is not being
+ * processed, make sure that it is reset. We are
+ * not going to call irq_end_vector() so unmask the
+ * interrupt.
+ */
+static void ldsr_backout_of_irq(int vector, unsigned long tid_mask)
+{
+#if defined(CONFIG_SMP)
+ if (unlikely(vector == smp_ipi_irq)) {
+ smp_reset_ipi(tid_mask);
+ }
+#endif
+ ldsr_unmask_vector(vector);
+ ldsr_interrupt.backout++;
+}
+
+#if defined(CONFIG_IRQSTACKS)
+/*
+ * ldsr_choose_savearea_and_returnvec()
+ * Test our current state (user, kernel, interrupt) and set things up.
+ *
+ * This version of the function uses 3 stacks and nests interrupts
+ * on the interrupt stack.
+ */
+static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
+{
+ struct pt_regs *save_area;
+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
+ struct thread_info * ti= (struct thread_info *)sw_ksp[tid];
+
+#if defined(CONFIG_SMP)
+ union irq_ctx *icp = percpu_irq_ctxs[tid];
+#else
+ union irq_ctx *icp = percpu_irq_ctxs[0];
+#endif
+
+ if (masked_linux_sp == (u32_t)icp) {
+ /*
+ * Fault/Interrupt occurred while on the interrupt stack.
+ */
+ save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
+ *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
+ } else {
+ /*
+ * Fault/Interrupt occurred while on user/kernel stack. This is a new
+ * first use of the interrupt stack.
+ */
+ save_area = (struct pt_regs *) ((char *)icp + sizeof(icp->stack) - sizeof(struct pt_regs) - 8);
+ if (masked_linux_sp == (u32_t)ti) {
+ *pvec = (u32_t)(&ret_from_interrupt_to_kernel);
+ } else {
+ *pvec = (u32_t)(&ret_from_interrupt_to_user);
+ }
+
+ /*
+ * Because the softirq code will execute on the "interrupt" stack, we
+ * need to maintain the knowledge of what "task" was executing on the
+ * cpu. This is done by copying the thread_info->task from the cpu
+ * we are about to context switch into the interrupt contexts thread_info
+ * structure.
+ */
+ icp->tinfo.task = ti->task;
+ icp->tinfo.preempt_count =
+ (icp->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+ (ti->preempt_count & SOFTIRQ_MASK);
+ icp->tinfo.interrupt_nesting = 0;
+ }
+ save_area->nesting_level = icp->tinfo.interrupt_nesting;
+ return save_area;
+}
+
+#else
+/*
+ * ldsr_choose_savearea_and_returnvec()
+ * Test our current state (user, kernel, interrupt) and set things up.
+ *
+ * The version of the function uses just the user & kernel stack and
+ * nests interrupts on the existing kernel stack.
+ */
+static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec)
+{
+ struct pt_regs *save_area;
+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
+ struct thread_info *ti = (struct thread_info *)sw_ksp[tid];
+
+ if (masked_linux_sp == (u32_t)ti) {
+ /*
+ * Fault/Interrupt occurred while on the kernel stack.
+ */
+ save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8);
+ *pvec = (u32_t) (&ret_from_interrupt_to_kernel);
+ } else {
+ /*
+ * Fault/Interrupt occurred while on user stack.
+ */
+ ti->interrupt_nesting = 0;
+ save_area = (struct pt_regs *)((u32_t)ti + THREAD_SIZE - sizeof(struct pt_regs) - 8);
+ *pvec = (u32_t) (&ret_from_interrupt_to_user);
+ }
+ save_area->nesting_level = ti->interrupt_nesting;
+ return save_area;
+}
+#endif
+
+/*
+ * ldsr_ctxsw_thread()
+ * Context switch a mainline thread to execute do_IRQ() for the specified
+ * vector.
+ */
+static void ldsr_ctxsw_thread(int vector, thread_t tid)
+{
+ u32_t linux_sp;
+ u32_t return_vector;
+ struct pt_regs *save_area, *regs;
+ u32_t thread_mask = (1 << tid);
+ u32_t read_csr = ((tid << 9) | (1 << 8));
+ u32_t write_csr = (tid << 15) | (1 << 14);
+ u32_t interrupt_vector = (u32_t)(&do_IRQ);
+
+ unsigned int frame_type = UBICOM32_FRAME_TYPE_INTERRUPT;
+
+
+ DEBUG_ASSERT(!thread_is_enabled(tid));
+
+ /*
+ * Acquire the necessary global and per thread locks for tid.
+ * As a side effect, we ensure that the thread has not trapped
+ * and return true if it has.
+ */
+ if (unlikely(thread_is_trapped(tid))) {
+ /*
+ * Read the trap cause, the sp and clear the MT_TRAP bits.
+ */
+ unsigned int cause;
+ asm volatile (
+ " setcsr %3 \n\t"
+ " setcsr_flush 0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 %0, TRAP_CAUSE \n\t"
+ " move.4 %1, SP \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 MT_BREAK_CLR, %2\n\t"
+ " move.4 MT_TRAP_CLR, %2 \n\t"
+ : "=&r" (cause), "=&r" (linux_sp)
+ : "r" (thread_mask), "m" (read_csr)
+ );
+
+ ldsr_backout_of_irq(vector, (1 << tid));
+
+#if !defined(CONFIG_UNALIGNED_ACCESS_DISABLED)
+ /*
+ * See if the unaligned trap handler can deal with this.
+ * If so, emulate the instruction and then just restart
+ * the thread.
+ */
+ if (unaligned_only(cause)) {
+#if defined(CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY)
+ /*
+ * Check if this is a kernel stack if so we will not
+ * handle the trap
+ */
+ u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1);
+ if ((masked_linux_sp != (u32_t)sw_ksp[tid]) &&
+ unaligned_only(cause)) {
+ ldsr_emulate_and_run(tid);
+ return;
+ }
+#else
+ ldsr_emulate_and_run(tid);
+ return;
+#endif
+
+ }
+#endif
+
+ interrupt_vector = (u32_t)(&trap_handler);
+ frame_type = UBICOM32_FRAME_TYPE_TRAP;
+ } else {
+ /*
+ * Read the target thread's SP
+ */
+ asm volatile (
+ " setcsr %1 \n\t"
+ " setcsr_flush 0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 %0, SP \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ : "=m" (linux_sp)
+ : "m" (read_csr)
+ );
+ }
+
+ /*
+ * We are delivering an interrupt, count it.
+ */
+ ldsr_interrupt.total++;
+
+ /*
+ * At this point, we will definitely force this thread to
+ * a new context, show its interrupts as disabled.
+ */
+ ldsr_thread_irq_disable(tid);
+
+ /*
+ * Test our current state (user, kernel, interrupt). Save the
+ * appropriate data and setup for the return.
+ */
+ save_area = ldsr_choose_savearea_and_returnvec(tid, linux_sp, &return_vector);
+
+ /*
+ * The pt_regs (save_area) contains the type of thread that we are dealing
+ * with (KERNEL/NORMAL) and is copied into each pt_regs area. We get this
+ * from the current tasks kernel pt_regs area that always exists at the
+ * top of the kernel stack.
+ */
+ regs = (struct pt_regs *)((u32_t)sw_ksp[tid] + THREAD_SIZE - sizeof(struct pt_regs) - 8);
+ save_area->thread_type = regs->thread_type;
+
+ /*
+ * Preserve the context of the Linux thread.
+ */
+ ldsr_preemptive_context_save(tid, save_area);
+
+ /*
+ * Load the fram_type into the save_area.
+ */
+ save_area->frame_type = frame_type;
+
+#ifdef CONFIG_STOP_ON_TRAP
+ /*
+ * Before we get backtrace and showing stacks working well, it sometimes
+ * helps to enter the debugger when a trap occurs before we change the
+ * thread to handle the fault. This optional code causes all threads to
+ * stop on every trap frame. One assumes that GDB connected via the
+ * mailbox interface will be used to recover from this state.
+ */
+ if (frame_type == UBICOM32_FRAME_TYPE_TRAP) {
+ THREAD_STALL;
+ }
+#endif
+
+#ifdef DEBUG_LDSR
+ copy_regs = *save_area;
+ copy_save_area = save_area;
+
+ old_a0 = save_area->an[0];
+ old_a3 = save_area->an[3];
+ old_sp = save_area->an[7];
+ old_a5 = save_area->an[5];
+ old_pc = save_area->pc;
+#endif
+
+ /*
+ * Now we have to switch the kernel thread to run do_IRQ function.
+ * Set pc to do_IRQ
+ * Set d0 to vector
+ * Set d1 to save_area.
+ * Set a5 to the proper return vector.
+ */
+ asm volatile (
+ " setcsr %0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 d0, %5 \n\t" /* d0 = 0 vector # */
+ " move.4 d1, %1 \n\t" /* d1 = save_area */
+ " move.4 sp, %1 \n\t" /* sp = save_area */
+ " move.4 a5, %2 \n\t" /* a5 = return_vector */
+ " move.4 pc, %3 \n\t" /* pc = do_IRQ routine. */
+ " move.4 trap_cause, #0 \n\t" /* Clear the trap cause
+ * register */
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " enable_kernel_ranges %4 \n\t"
+ " move.4 mt_dbg_active_set, %4 \n\t" /* Activate thread even if
+ * in dbg/fault state */
+ " move.4 mt_active_set, %4 \n\t" /* Restart target
+ * thread. */
+ :
+ : "r" (write_csr), "r" (save_area),
+ "r" (return_vector), "r" (interrupt_vector),
+ "d" (thread_mask), "r" (vector)
+ : "cc"
+ );
+ thread_enable_mask(thread_mask);
+}
+
+/*
+ * ldsr_deliver_interrupt()
+ * Deliver the interrupt to one of the threads or all of the threads.
+ */
+static void ldsr_deliver_interrupt(int vector,
+ unsigned long deliver_to,
+ int all)
+{
+ unsigned long disabled_threads;
+ unsigned long possible_threads;
+ unsigned long trapped_threads;
+ unsigned long global_locks;
+
+ /*
+ * Disable all of the threads that we might want to send
+ * this interrupt to.
+ */
+retry:
+ DEBUG_ASSERT(deliver_to);
+ thread_disable_mask(deliver_to);
+
+ /*
+ * If any threads are in the trap state, we have to service the
+ * trap for those threads first.
+ */
+ asm volatile (
+ "move.4 %0, MT_TRAP \n\t"
+ : "=r" (trapped_threads)
+ :
+ );
+
+ trapped_threads &= deliver_to;
+ if (unlikely(trapped_threads)) {
+ /*
+ * all traps will be handled, so clear the trap bit before restarting any threads
+ */
+ ubicom32_clear_interrupt(ldsr_trap_irq);
+
+ /*
+ * Let the remaining untrapped threads, continue.
+ */
+ deliver_to &= ~trapped_threads;
+ if (deliver_to) {
+ thread_enable_mask(deliver_to);
+ }
+
+ /*
+ * For the trapped threads force them to handle
+ * a trap.
+ */
+ while (trapped_threads) {
+ unsigned long which = ffz(~trapped_threads);
+ trapped_threads &= ~(1 << which);
+ ldsr_ctxsw_thread(vector, which);
+ }
+ return;
+ }
+
+ /*
+ * Can we deliver an interrupt to any of the threads?
+ */
+ disabled_threads = ldsr_thread_get_interrupts();
+ possible_threads = deliver_to & ~disabled_threads;
+ if (unlikely(!possible_threads)) {
+#if defined(CONFIG_SMP)
+ /*
+ * In the SMP case, we can not wait because 1 cpu might be
+ * sending an IPI to another cpu which is currently blocked.
+ * The only way to ensure IPI delivery is to backout and
+ * keep trying. For SMP, we don't sleep until the interrupts
+ * are delivered.
+ */
+ thread_enable_mask(deliver_to);
+ ldsr_backout_of_irq(vector, deliver_to);
+ return;
+#else
+ /*
+ * In the UP case, we have nothing to do so we should wait.
+ *
+ * Since the INT_MASK0 and INT_MASK1 are "re-loaded" before we
+ * suspend in the outer loop, we do not need to save them here.
+ *
+ * We test that we were awakened for our specific interrupts
+ * because the ldsr mask/unmask operations will force the ldsr
+ * awake even if the interrupt on the mainline thread is not
+ * completed.
+ */
+ unsigned int scratch = 0;
+ thread_enable_mask(deliver_to);
+ asm volatile (
+ " move.4 INT_MASK0, %1 \n\t"
+ " move.4 INT_MASK1, #0 \n\t"
+
+ "1: suspend \n\t"
+ " move.4 %0, INT_STAT0 \n\t"
+ " and.4 %0, %0, %1 \n\t"
+ " jmpeq.f 1b \n\t"
+
+ " move.4 INT_CLR0, %2 \n\t"
+ : "+r" (scratch)
+ : "d" (ldsr_suspend_mask), "r" (ldsr_soft_irq_mask)
+ : "cc"
+ );
+
+ /*
+ * This delay is sized to coincide with the time it takes a
+ * thread to complete the exit (see return_from_interrupt).
+ */
+ ldsr_interrupt.retry++;
+ __delay(10);
+ goto retry;
+#endif
+ }
+
+ /*
+ * If any of the global locks are held, we can not deliver any
+ * interrupts, we spin delay(10) and then try again. If our
+ * spinning becomes a bottle neck, we will need to suspend but for
+ * now lets just spin.
+ */
+ asm volatile (
+ "move.4 %0, scratchpad1 \n\t"
+ : "=r" (global_locks)
+ :
+ );
+ if (unlikely(global_locks & 0xffff0000)) {
+ thread_enable_mask(deliver_to);
+
+ /*
+ * This delay is sized to coincide with the average time it
+ * takes a thread to release a global lock.
+ */
+ ldsr_interrupt.retry++;
+ __delay(10);
+ goto retry;
+ }
+
+ /*
+ * Deliver to one cpu.
+ */
+ if (!all) {
+ /*
+ * Find our victim and then enable everyone else.
+ */
+ unsigned long victim = ldsr_rotate_threads(possible_threads);
+ DEBUG_ASSERT((deliver_to & (1 << victim)));
+ DEBUG_ASSERT((possible_threads & (1 << victim)));
+
+ deliver_to &= ~(1 << victim);
+ if (deliver_to) {
+ thread_enable_mask(deliver_to);
+ }
+ ldsr_ctxsw_thread(vector, victim);
+ return;
+ }
+
+ /*
+ * If we can't deliver to some threads, wake them
+ * back up and reset things to deliver to them.
+ */
+ deliver_to &= ~possible_threads;
+ if (unlikely(deliver_to)) {
+ thread_enable_mask(deliver_to);
+ ldsr_backout_of_irq(vector, deliver_to);
+ }
+
+ /*
+ * Deliver to all possible threads(s).
+ */
+ while (possible_threads) {
+ unsigned long victim = ffz(~possible_threads);
+ possible_threads &= ~(1 << victim);
+ ldsr_ctxsw_thread(vector, victim);
+ }
+}
+
+/*
+ * ldsr_thread()
+ * This thread acts as the interrupt controller for Linux.
+ */
+static void ldsr_thread(void *arg)
+{
+ int stat0;
+ int stat1;
+ int interrupt0;
+ int interrupt1;
+ long long interrupts;
+ unsigned long cpus;
+
+#if !defined(CONFIG_SMP)
+ /*
+ * In a non-smp configuration, we can not use the cpu(s) arrays because
+ * there is not a 1-1 correspondence between cpus(s) and our threads.
+ * Thus we must get a local idea of the mainline threads and use the
+ * one and only 1 set as the victim. We do this once before the ldsr
+ * loop.
+ *
+ * In the SMP case, we will use the cpu(s) map to determine which cpu(s)
+ * are valid to send interrupts to.
+ */
+ int victim = 0;
+ unsigned int mainline = thread_get_mainline();
+ if (mainline == 0) {
+ panic("no mainline Linux threads to interrupt");
+ return;
+ }
+ victim = ffz(~mainline);
+ cpus = (1 << victim);
+#endif
+
+ while (1) {
+ /*
+ * If one changes this code not to reload the INT_MASK(s), you
+ * need to know that code in the lock waiting above does not
+ * reset the MASK registers back; so that code will need to be
+ * changed.
+ */
+ ldsr_lock_acquire();
+ asm volatile (
+ " move.4 INT_MASK0, %0 \n\t"
+ " move.4 INT_MASK1, %1 \n\t"
+ :
+ : "U4" (ldsr_interrupt.mask0), "U4" (ldsr_interrupt.mask1)
+ );
+ ldsr_lock_release();
+ thread_suspend();
+
+ /*
+ * Read the interrupt status registers
+ */
+ asm volatile (
+ "move.4 %0, INT_STAT0 \n\t"
+ "move.4 %1, INT_STAT1 \n\t"
+ : "=r" (stat0), "=r" (stat1)
+ :
+ );
+
+ /*
+ * We only care about interrupts that we have been told to care
+ * about. The interrupt must be enabled, unmasked, and have
+ * occurred in the hardware.
+ */
+ ldsr_lock_acquire();
+ interrupt0 = ldsr_interrupt.enabled0 &
+ ldsr_interrupt.mask0 & stat0;
+ interrupt1 = ldsr_interrupt.enabled1 &
+ ldsr_interrupt.mask1 & stat1;
+ ldsr_lock_release();
+
+ /*
+ * For each interrupt in the "snapshot" we will mask the
+ * interrupt handle the interrupt (typically calling do_IRQ()).
+ *
+ * The interrupt is unmasked by desc->chip->end() function in
+ * the per chip generic interrupt handling code
+ * (arch/ubicom32/kernel/irq.c).8
+ */
+ interrupts = ((unsigned long long)interrupt1 << 32) |
+ interrupt0;
+ while (interrupts) {
+ int all = 0;
+ int vector = ldsr_rotate_interrupts(interrupts);
+ interrupts &= ~((unsigned long long)1 << vector);
+
+ /*
+ * Now mask off this vector so that the LDSR ignores
+ * it until it is acknowledged.
+ */
+ ldsr_mask_vector(vector);
+#if !defined(CONFIG_SMP)
+ ldsr_deliver_interrupt(vector, cpus, all);
+#else
+ cpus = smp_get_affinity(vector, &all);
+ if (cpus) {
+ ldsr_deliver_interrupt(vector, cpus, all);
+ }
+#endif
+ }
+ }
+
+ /* NOTREACHED */
+}
+
+/*
+ * ldsr_mask_vector()
+ * Temporarily mask the interrupt vector, turn off the bit in the mask
+ * register.
+ */
+void ldsr_mask_vector(unsigned int vector)
+{
+ unsigned int mask;
+ if (vector < 32) {
+ mask = ~(1 << vector);
+ ldsr_lock_acquire();
+ ldsr_interrupt.mask0 &= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+ return;
+ }
+
+ mask = ~(1 << (vector - 32));
+ ldsr_lock_acquire();
+ ldsr_interrupt.mask1 &= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+}
+
+/*
+ * ldsr_unmask_vector()
+ * Unmask the interrupt vector so that it can be used, turn on the bit in
+ * the mask register.
+ *
+ * Because it is legal for the interrupt path to disable an interrupt,
+ * the unmasking code must ensure that disabled interrupts are not
+ * unmasked.
+ */
+void ldsr_unmask_vector(unsigned int vector)
+{
+ unsigned int mask;
+ if (vector < 32) {
+ mask = (1 << vector);
+ ldsr_lock_acquire();
+ ldsr_interrupt.mask0 |= (mask & ldsr_interrupt.enabled0);
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+ return;
+ }
+
+ mask = (1 << (vector - 32));
+ ldsr_lock_acquire();
+ ldsr_interrupt.mask1 |= (mask & ldsr_interrupt.enabled1);
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+}
+
+/*
+ * ldsr_enable_vector()
+ * The LDSR implements an interrupt controller and has a local (to the
+ * LDSR) copy of its interrupt mask.
+ */
+void ldsr_enable_vector(unsigned int vector)
+{
+ unsigned int mask;
+ if (vector < 32) {
+ mask = (1 << vector);
+ ldsr_lock_acquire();
+ ldsr_interrupt.enabled0 |= mask;
+ ldsr_interrupt.mask0 |= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+ return;
+ }
+
+ mask = (1 << (vector - 32));
+ ldsr_lock_acquire();
+ ldsr_interrupt.enabled1 |= mask;
+ ldsr_interrupt.mask1 |= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+}
+
+/*
+ * ldsr_disable_vector()
+ * The LDSR implements an interrupt controller and has a local (to the
+ * LDSR) copy of its interrupt mask.
+ */
+void ldsr_disable_vector(unsigned int vector)
+{
+ unsigned int mask;
+
+ if (vector < 32) {
+ mask = ~(1 << vector);
+ ldsr_lock_acquire();
+ ldsr_interrupt.enabled0 &= mask;
+ ldsr_interrupt.mask0 &= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+ return;
+ }
+
+ mask = ~(1 << (vector - 32));
+ ldsr_lock_acquire();
+ ldsr_interrupt.enabled1 &= mask;
+ ldsr_interrupt.mask1 &= mask;
+ ldsr_lock_release();
+ thread_resume(ldsr_tid);
+}
+
+/*
+ * ldsr_get_threadid()
+ * Return the threadid of the LDSR thread.
+ */
+thread_t ldsr_get_threadid(void)
+{
+ return ldsr_tid;
+}
+
+/*
+ * ldsr_set_trap_irq()
+ * Save away the trap Soft IRQ
+ *
+ * See the per thread lock suspend code above for an explination.
+ */
+void ldsr_set_trap_irq(unsigned int irq)
+{
+ ldsr_trap_irq = irq;
+ ldsr_trap_irq_mask = (1 << irq);
+ ldsr_suspend_mask |= ldsr_trap_irq_mask;
+}
+
+/*
+ * ldsr_init()
+ * Initialize the LDSR (Interrupt Controller)
+ */
+void ldsr_init(void)
+{
+#if defined(CONFIG_IRQSTACKS)
+ int i;
+ union irq_ctx *icp;
+#endif
+
+ void *stack_high = (void *)ldsr_stack_space;
+ stack_high += sizeof(ldsr_stack_space);
+ stack_high -= 8;
+
+
+ /*
+ * Obtain a soft IRQ to use
+ */
+ if (irq_soft_alloc(&ldsr_soft_irq) < 0) {
+ panic("no software IRQ is available\n");
+ return;
+ }
+ ldsr_soft_irq_mask |= (1 << ldsr_soft_irq);
+ ldsr_suspend_mask |= ldsr_soft_irq_mask;
+
+ /*
+ * Now allocate and start the LDSR thread.
+ */
+ ldsr_tid = thread_alloc();
+ if (ldsr_tid < 0) {
+ panic("no thread available to run LDSR");
+ return;
+ }
+
+#if defined(CONFIG_IRQSTACKS)
+ /*
+ * Initialize the per-cpu irq thread_info structure that
+ * is at the top of each per-cpu irq stack.
+ */
+ icp = (union irq_ctx *)
+ (((unsigned long)percpu_irq_stacks + (THREAD_SIZE - 1)) & ~(THREAD_SIZE - 1));
+ for (i = 0; i < NR_CPUS; i++) {
+ struct thread_info *ti = &(icp->tinfo);
+ ti->task = NULL;
+ ti->exec_domain = NULL;
+ ti->cpu = i;
+ ti->preempt_count = 0;
+ ti->interrupt_nesting = 0;
+ percpu_irq_ctxs[i] = icp++;
+ }
+#endif
+ thread_start(ldsr_tid, ldsr_thread, NULL,
+ stack_high, THREAD_TYPE_NORMAL);
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/Makefile
@@ -0,0 +1,64 @@
+#
+# arch/ubicom32/kernel/Makefile
+# Main Makefile for the Ubicom32 arch directory.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y += \
+ devtree.o \
+ dma.o \
+ flat.o \
+ init_task.o \
+ irq.o \
+ ldsr.o \
+ os_node.o \
+ process.o \
+ processor.o \
+ ptrace.o \
+ setup.o \
+ signal.o \
+ stacktrace.o \
+ sys_ubicom32.o \
+ syscalltable.o \
+ thread.o \
+ time.o \
+ traps.o \
+ ubicom32_context_switch.o \
+ ubicom32_ksyms.o \
+ ubicom32_syscall.o \
+ unaligned_trap.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_COMEMPCI) += comempci.o
+obj-$(CONFIG_SMP) += smp.o topology.o
+obj-$(CONFIG_ACCESS_OK_CHECKS_ENABLED) += uaccess.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS) += timer_device.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer_broadcast.o
+
+ifndef CONFIG_GENERIC_CLOCKEVENTS
+obj-y += timer_tick.o
+endif
--- /dev/null
+++ b/arch/ubicom32/kernel/module.c
@@ -0,0 +1,463 @@
+/*
+ * arch/ubicom32/kernel/module.c
+ * Ubicom32 architecture loadable module support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/moduleloader.h>
+#include <linux/bug.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/ocm-alloc.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+static void _module_free_ocm(struct module *mod)
+{
+ printk(KERN_INFO "module arch cleanup %s: OCM instruction memory free "
+ " of %d @%p\n", mod->name, mod->arch.ocm_inst_size,
+ mod->arch.ocm_inst);
+
+ if (mod->arch.ocm_inst) {
+ ocm_inst_free(mod->arch.ocm_inst);
+ mod->arch.ocm_inst = 0;
+ mod->arch.ocm_inst_size = 0;
+ }
+}
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+
+ /*
+ * This is expected to be final module free, use this to prune the
+ * ocm
+ */
+ if (module_region && module_region == mod->module_core)
+ _module_free_ocm(mod);
+
+}
+
+/*
+ * module_frob_arch_sections()
+ * Called from kernel/module.c allowing arch specific handling of
+ * sections/headers.
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ Elf_Shdr *s, *sechdrs_end;
+ void *ocm_inst = NULL;
+ int ocm_inst_size = 0;
+
+ /*
+ * Ubicom32 v3 and v4 are almost binary compatible but not completely.
+ * To be safe check that the module was compiled with the correct -march
+ * which is flags.
+ */
+#ifdef CONFIG_UBICOM32_V4
+ if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V4) {
+ printk(KERN_WARNING "Module %s was not compiled for "
+ "ubicom32v4, elf_flags:%x,\n",
+ mod->name, hdr->e_flags);
+ return -ENOEXEC;
+ }
+#elif defined CONFIG_UBICOM32_V3
+ if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V3) {
+ printk(KERN_WARNING "Module %s was not compiled for "
+ "ubicom32v3, elf_flags:%x\n",
+ mod->name, hdr->e_flags);
+ return -ENOEXEC;
+ }
+#else
+#error Unknown/Unsupported ubicom32 architecture.
+#endif
+
+ /*
+ * XXX: sechdrs are vmalloced in kernel/module.c
+ * and would be vfreed just after module is loaded,
+ * so we hack to keep the only information we needed
+ * in mod->arch to correctly free L1 I/D sram later.
+ * NOTE: this breaks the semantic of mod->arch structure.
+ */
+ sechdrs_end = sechdrs + hdr->e_shnum;
+ for (s = sechdrs; s < sechdrs_end; ++s) {
+ if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0)
+ ocm_inst_size += s->sh_size;
+ }
+
+ if (!ocm_inst_size)
+ return 0;
+
+ ocm_inst = ocm_inst_alloc(ocm_inst_size, 0 /* internal */);
+ if (ocm_inst == NULL) {
+#ifdef CONFIG_OCM_MODULES_FALLBACK_TO_DDR
+ printk(KERN_WARNING
+ "module %s: OCM instruction memory allocation of %d"
+ "failed, fallback to DDR\n", mod->name, ocm_inst_size);
+ return 0;
+#else
+ printk(KERN_ERR
+ "module %s: OCM instruction memory allocation of %d"
+ "failed.\n", mod->name, ocm_inst_size);
+ return -ENOMEM;
+#endif
+ }
+
+ mod->arch.ocm_inst = ocm_inst;
+ mod->arch.ocm_inst_size = ocm_inst_size;
+
+ printk(KERN_INFO
+ "module %s: OCM instruction memory allocation of %d @%p\n",
+ mod->name, mod->arch.ocm_inst_size, mod->arch.ocm_inst);
+
+ for (s = sechdrs; s < sechdrs_end; ++s) {
+ if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0) {
+ memcpy(ocm_inst, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)ocm_inst;
+ ocm_inst += s->sh_size;
+ }
+ }
+
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ DEBUGP("Invalid Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ return -EINVAL;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ uint32_t insn;
+
+ DEBUGP("Applying relocate_add section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ uint32_t v;
+ const int elf32_rtype = ELF32_R_TYPE(rel[i].r_info);
+
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ v = rel[i].r_addend + sym->st_value;
+
+
+ switch (elf32_rtype) {
+ case R_UBICOM32_32:
+ {
+ /*
+ * Store the 32 bit relocation as is.
+ */
+ *location = v;
+ break;
+ }
+ case R_UBICOM32_HI24:
+ {
+ /*
+ * 24 bit relocation that is part of the MOVEAI
+ * instruction. The 24 bits come from bits 7 - 30 of the
+ * relocation. Theses bits eventually get split into 2
+ * fields in the instruction encoding.
+ *
+ * - Bits 7 - 27 of the relocation are encoded into bits
+ * 0 - 20 of the instruction.
+ *
+ * - Bits 28 - 30 of the relocation are encoded into
+ * bit 24 - 26 of the instruction.
+ */
+ uint32_t valid24 = (v >> 7) & 0xffffff;
+ insn = *location;
+
+ insn &= ~(0x1fffff | (0x7 << 24));
+ insn |= (valid24 & 0x1fffff);
+ insn |= ((valid24 & 0xe00000) << 3);
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_LO7_S:
+ case R_UBICOM32_LO7_2_S:
+ case R_UBICOM32_LO7_4_S:
+ {
+ /*
+ * Bits 0 - 6 of the relocation are encoded into the
+ * 7bit unsigned immediate fields of the SOURCE-1 field
+ * of the instruction. The immediate value is left
+ * shifted by (0, 1, 2) based on the operand size.
+ */
+ uint32_t valid7 = v & 0x7f;
+ insn = *location;
+
+ if (elf32_rtype == R_UBICOM32_LO7_2_S) {
+ valid7 >>= 1;
+ } else if (elf32_rtype == R_UBICOM32_LO7_4_S) {
+ valid7 >>= 2;
+ }
+
+ insn &= ~(0x1f | (0x3 << 8));
+ insn |= (valid7 & 0x1f);
+ insn |= ((valid7 & 0x60) << 3);
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_LO7_D:
+ case R_UBICOM32_LO7_2_D:
+ case R_UBICOM32_LO7_4_D:
+ {
+ /*
+ * Bits 0 - 6 of the relocation are encoded into the
+ * 7bit unsigned immediate fields of the DESTINATION
+ * field of the instruction. The immediate value is
+ * left shifted by (0, 1, 2) based on the operand size.
+ */
+ uint32_t valid7 = v & 0x7f;
+ insn = *location;
+
+ if (elf32_rtype == R_UBICOM32_LO7_2_D) {
+ valid7 >>= 1;
+ } else if (elf32_rtype == R_UBICOM32_LO7_4_D) {
+ valid7 >>= 2;
+ }
+
+ insn &= ~((0x1f | (0x3 << 8)) << 16);
+ insn |= ((valid7 & 0x1f) << 16);
+ insn |= ((valid7 & 0x60) << 19);
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_LO7_CALLI:
+ case R_UBICOM32_LO16_CALLI:
+ {
+ /*
+ * Extract the offset for a CALLI instruction. The
+ * offsets can be either 7 bits or 18 bits. Since all
+ * instructions in ubicom32 architecture are at work
+ * aligned addresses the truncated offset is right
+ * shifted by 2 before being encoded in the instruction.
+ */
+ uint32_t val;
+ if (elf32_rtype == R_UBICOM32_LO7_CALLI) {
+ val = v & 0x7f;
+ } else {
+ val = v & 0x3ffff;
+ }
+
+ val >>= 2;
+
+ insn = *location;
+
+ insn &= ~0x071f071f;
+ insn |= (val & 0x1f) << 0;
+ val >>= 5;
+ insn |= (val & 0x07) << 8;
+ val >>= 3;
+ insn |= (val & 0x1f) << 16;
+ val >>= 5;
+ insn |= (val & 0x07) << 24;
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_24_PCREL:
+ {
+ /*
+ * Extract 26 bit signed PC relative offset for CALL
+ * instructions. Since instruction addresses are word
+ * aligned the offset is right shited by 2 before
+ * encoding into instruction.
+ */
+ int32_t val = v - (int32_t)location;
+
+ /*
+ * Check that the top 7 bits are all equal to the sign
+ * bit (26), i.e all 0's or all 1's. If they are not then
+ * the absolute difference is greater than 25 bits.
+ */
+ if (((uint32_t)val & 0xFE000000) != 0xFE000000 &&
+ ((uint32_t)val & 0xFE000000) != 0x0) {
+ /*
+ * The relocation is beyond our addressable
+ * range with a 26 bit call.
+ */
+ printk(KERN_ERR "module %s: PC Relative "
+ "relocation out of range: "
+ "%u (%x->%x, %x)\n",
+ me->name, elf32_rtype,
+ v, (uint32_t) location, val);
+ return -ENOEXEC;
+ }
+
+ val = (val & 0x3ffffff) >> 2;
+ insn = *location;
+ insn = insn & 0xf8e00000;
+
+ insn |= (val >> 21) << 24;
+ insn |= (val & 0x1fffff);
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_LO16:
+ case R_UBICOM32_HI16:
+ {
+ /*
+ * 16 bit immediate value that is encoded into bit 0 -
+ * 15 of the instruction.
+ */
+ uint32_t val;
+
+ if (elf32_rtype == R_UBICOM32_LO16) {
+ val = v & 0xffff;
+ } else {
+ val = (v >> 16) & 0xffff;
+ }
+
+ insn = *location;
+ insn &= 0xffff0000;
+
+ insn |= val;
+ *location = insn;
+ }
+ break;
+ case R_UBICOM32_21_PCREL:
+ {
+ /*
+ * Extract 23 bit signed PC relative offset for JMP<cc>
+ * instructions. Since instruction addresses are word
+ * aligned the offset is right shited by 2 before
+ * encoding into instruction.
+ */
+ int32_t val = v - (int32_t)location;
+
+ val = (val & 0x7fffff) >> 2;
+ insn = *location;
+ insn = insn & 0xffe00000;
+
+ insn |= (val >> 21) << 24;
+ insn |= val;
+ *location = insn;
+ }
+ break;
+ default:
+ BUG();
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, elf32_rtype);
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *mod)
+{
+ unsigned int i, strindex = 0, symindex = 0;
+ char *secstrings;
+ int err;
+
+ err = module_bug_finalize(hdr, sechdrs, mod);
+ if (err)
+ return err;
+
+ if (!mod->arch.ocm_inst) {
+ /*
+ * No OCM code, so nothing more to do.
+ */
+ return 0;
+ }
+
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ }
+ }
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ if ((sechdrs[i].sh_type == SHT_RELA) &&
+ (strncmp(".rela.ocm_text",
+ secstrings + sechdrs[i].sh_name, 5 + 9) == 0)) {
+ err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
+ symindex, i, mod);
+ if (err)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+ module_bug_cleanup(mod);
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/os_node.c
@@ -0,0 +1,80 @@
+/*
+ * arch/ubicom32/kernel/os_node.c
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include "linux/types.h"
+#include "linux/linkage.h"
+#include "linux/uts.h"
+#include "linux/utsrelease.h"
+#include "linux/version.h"
+#include <asm/ocm_size.h>
+#include <asm/devtree.h>
+#include <asm/ip5000.h>
+
+extern asmlinkage void *_start;
+
+/*
+ * This file provides static information to the boot code allowing it to decide
+ * if the os is compatible. Thus hopefully enabling the boot code to prevent
+ * accidentally booting a kernel that has no hope of running.
+ */
+struct os_node {
+ struct devtree_node node;
+ unsigned long version; /* Always 1 */
+ unsigned long entry_point;
+ const char os_name[32]; /* For diagnostic purposes only */
+ const char os_version_str[32];
+ unsigned long os_version_num;
+ unsigned long expected_ocm_code_start;/* OS Code */
+ unsigned long expected_ocm_data_end; /* OS Data */
+ unsigned long expected_ram_start;
+ unsigned long expected_ram_end;
+ unsigned long arch_version;
+};
+
+
+/*
+ * The os_node is only referenced by head.S and should never be modified at
+ * run-time.
+ */
+asmlinkage const struct os_node _os_node = {
+ .node = {
+ .next = NULL,
+ .name = { "OS" },
+ .magic = 0x10203040,
+ },
+ .version = 0x10001,
+ .entry_point = (unsigned long)&_start,
+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
+ .expected_ocm_code_start = OCMSTART + APP_OCM_CODE_SIZE,
+ .expected_ocm_data_end = OCMEND - APP_OCM_DATA_SIZE,
+#else
+ .expected_ocm_code_start = OCMEND,
+ .expected_ocm_data_end = OCMEND,
+#endif
+ .os_name = { UTS_SYSNAME },
+ .os_version_str = { UTS_RELEASE },
+ .os_version_num = LINUX_VERSION_CODE,
+ .expected_ram_start = CONFIG_KERNELBASE,
+ .expected_ram_end = CONFIG_RAMBASE + CONFIG_RAMSIZE,
+ .arch_version = UBICOM32_ARCH_VERSION
+};
--- /dev/null
+++ b/arch/ubicom32/kernel/process.c
@@ -0,0 +1,494 @@
+/*
+ * arch/ubicom32/kernel/process.c
+ * Ubicom32 architecture-dependent process handling.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ *
+ * uClinux changes
+ * Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/pm.h>
+
+#include <linux/uaccess.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+#include <asm/ip5000.h>
+#include <asm/range-protect.h>
+
+asmlinkage void ret_from_fork(void);
+
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
+/* machine-dependent / hardware-specific power functions */
+void (*mach_reset)(void);
+void (*mach_halt)(void);
+void (*mach_power_off)(void);
+
+/*
+ * cpu_idle()
+ * The idle thread.
+ *
+ * Our idle loop suspends and is woken up by a timer interrupt.
+ */
+void cpu_idle(void)
+{
+ while (1) {
+ local_irq_disable();
+ while (!need_resched()) {
+ local_irq_enable();
+ thread_suspend();
+ local_irq_disable();
+ }
+ local_irq_enable();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+/*
+ * dump_fpu()
+ *
+ * Fill in the fpu structure for a core dump. (just a stub as we don't have
+ * an fpu)
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
+{
+ return 1;
+}
+
+/*
+ * machine_restart()
+ * Resets the system.
+ */
+void machine_restart(char *__unused)
+{
+ /*
+ * Disable all threads except myself. We can do this
+ * directly without needing to call smp_send_stop
+ * because we have a unique architecture where
+ * one thread can disable one or more other threads.
+ */
+ thread_disable_others();
+
+ /*
+ * Call the hardware-specific machine reset function.
+ */
+ if (mach_reset) {
+ mach_reset();
+ }
+
+ printk(KERN_EMERG "System Restarting\n");
+
+ /*
+ * Set watchdog to trigger (after 1ms delay) (12 Mhz is the fixed OSC)
+ */
+ UBICOM32_IO_TIMER->tkey = TIMER_TKEYVAL;
+ UBICOM32_IO_TIMER->wdcom = UBICOM32_IO_TIMER->mptval +
+ (12000000 / 1000);
+ UBICOM32_IO_TIMER->wdcfg = 0;
+ UBICOM32_IO_TIMER->tkey = 0;
+
+ /*
+ * Wait for watchdog
+ */
+ asm volatile (
+ " move.4 MT_EN, #0 \n\t"
+ " pipe_flush 0 \n\t"
+ );
+
+ local_irq_disable();
+ for (;;) {
+ thread_suspend();
+ }
+}
+
+/*
+ * machine_halt()
+ * Halt the machine.
+ *
+ * Similar to machine_power_off, but don't shut off power. Add code
+ * here to freeze the system for e.g. post-mortem debug purpose when
+ * possible. This halt has nothing to do with the idle halt.
+ */
+void machine_halt(void)
+{
+ /*
+ * Disable all threads except myself. We can do this
+ * directly without needing to call smp_send_stop
+ * because we have a unique architecture where
+ * one thread can disable one or more other threads.
+ */
+ thread_disable_others();
+
+ /*
+ * Call the hardware-specific machine halt function.
+ */
+ if (mach_halt) {
+ mach_halt();
+ }
+
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ local_irq_disable();
+ for (;;) {
+ thread_suspend();
+ }
+}
+
+/*
+ * machine_power_off()
+ * Turn the power off, if a power off handler is defined, otherwise, spin
+ * endlessly.
+ */
+void machine_power_off(void)
+{
+ /*
+ * Disable all threads except myself. We can do this
+ * directly without needing to call smp_send_stop
+ * because we have a unique architecture where
+ * one thread can disable one or more other threads.
+ */
+ thread_disable_others();
+
+ /*
+ * Call the hardware-specific machine power off function.
+ */
+ if (mach_power_off) {
+ mach_power_off();
+ }
+
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ local_irq_disable();
+ for (;;) {
+ thread_suspend();
+ }
+}
+
+/*
+ * show_regs()
+ * Print out all of the registers.
+ */
+void show_regs(struct pt_regs *regs)
+{
+ unsigned int i;
+
+ printk(KERN_NOTICE "regs: %p, tid: %d\n",
+ (void *)regs,
+ thread_get_self());
+
+ printk(KERN_NOTICE "pc: %08x, previous_pc: %08x\n\n",
+ (unsigned int)regs->pc,
+ (unsigned int)regs->previous_pc);
+
+ printk(KERN_NOTICE "Data registers\n");
+ for (i = 0; i < 16; i++) {
+ printk("D%02d: %08x, ", i, (unsigned int)regs->dn[i]);
+ if ((i % 4) == 3) {
+ printk("\n");
+ }
+ }
+ printk("\n");
+
+ printk(KERN_NOTICE "Address registers\n");
+ for (i = 0; i < 8; i++) {
+ printk("A%02d: %08x, ", i, (unsigned int)regs->an[i]);
+ if ((i % 4) == 3) {
+ printk("\n");
+ }
+ }
+ printk("\n");
+
+ printk(KERN_NOTICE "acc0: %08x-%08x, acc1: %08x-%08x\n",
+ (unsigned int)regs->acc0[1],
+ (unsigned int)regs->acc0[0],
+ (unsigned int)regs->acc1[1],
+ (unsigned int)regs->acc1[0]);
+
+ printk(KERN_NOTICE "mac_rc16: %08x, source3: %08x\n",
+ (unsigned int)regs->mac_rc16,
+ (unsigned int)regs->source3);
+
+ printk(KERN_NOTICE "inst_cnt: %08x, csr: %08x\n",
+ (unsigned int)regs->inst_cnt,
+ (unsigned int)regs->csr);
+
+ printk(KERN_NOTICE "int_mask0: %08x, int_mask1: %08x\n",
+ (unsigned int)regs->int_mask0,
+ (unsigned int)regs->int_mask1);
+
+ printk(KERN_NOTICE "frame_type: %d, nesting_level: %d, thread_type %d\n\n",
+ (int)regs->frame_type,
+ (int)regs->nesting_level,
+ (int)regs->thread_type);
+}
+
+/*
+ * kernel_thread_helper()
+ * On execution d0 will be 0, d1 will be the argument to be passed to the
+ * kernel function. d2 contains the kernel function that needs to get
+ * called. d3 will contain address to do_exit which need to get moved
+ * into a5. On return from fork the child thread d0 will be 0. We call
+ * this dummy function which in turn loads the argument
+ */
+asmlinkage void kernel_thread_helper(void);
+
+/*
+ * kernel_thread()
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+
+ regs.dn[1] = (unsigned long)arg;
+ regs.dn[2] = (unsigned long)fn;
+ regs.dn[3] = (unsigned long)do_exit;
+ regs.an[5] = (unsigned long)kernel_thread_helper;
+ regs.pc = (unsigned long)kernel_thread_helper;
+ regs.nesting_level = 0;
+ regs.thread_type = KERNEL_THREAD;
+
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED,
+ 0, &regs, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+/*
+ * flush_thread()
+ * XXX todo
+ */
+void flush_thread(void)
+{
+ /* XXX todo */
+}
+
+/*
+ * sys_fork()
+ * Not implemented on no-mmu.
+ */
+asmlinkage int sys_fork(struct pt_regs *regs)
+{
+ /* fork almost works, enough to trick you into looking elsewhere :-( */
+ return -EINVAL;
+}
+
+/*
+ * sys_vfork()
+ * By the time we get here, the non-volatile registers have also been saved
+ * on the stack. We do some ugly pointer stuff here.. (see also copy_thread
+ * which does context copy).
+ */
+asmlinkage int sys_vfork(struct pt_regs *regs)
+{
+ unsigned long old_sp = regs->an[7];
+ unsigned long old_a5 = regs->an[5];
+ unsigned long old_return_address;
+ long do_fork_return;
+
+ /*
+ * Read the old retrun address from the stack.
+ */
+ if (copy_from_user(&old_return_address,
+ (void *)old_sp, sizeof(unsigned long))) {
+ force_sig(SIGSEGV, current);
+ return 0;
+ }
+
+ /*
+ * Pop the vfork call frame by setting a5 and pc to the old_return
+ * address and incrementing the stack pointer by 4.
+ */
+ regs->an[5] = old_return_address;
+ regs->pc = old_return_address;
+ regs->an[7] += 4;
+
+ do_fork_return = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+ regs->an[7], regs, 0, NULL, NULL);
+
+ /*
+ * Now we have to test if the return code is an error. If it is an error
+ * then restore the frame and we will execute error processing in user
+ * space. Other wise the child and the parent will return to the correct
+ * places.
+ */
+ if ((unsigned long)(do_fork_return) >= (unsigned long)(-125)) {
+ /*
+ * Error case. We need to restore the frame.
+ */
+ regs->an[5] = old_a5;
+ regs->pc = old_a5;
+ regs->an[7] = old_sp;
+ }
+
+ return do_fork_return;
+}
+
+/*
+ * sys_clone()
+ * creates a child thread.
+ */
+asmlinkage int sys_clone(unsigned long clone_flags,
+ unsigned long newsp,
+ struct pt_regs *regs)
+{
+ if (!newsp)
+ newsp = regs->an[7];
+ return do_fork(clone_flags, newsp, regs, 0,
+ NULL, NULL);
+}
+
+/*
+ * copy_thread()
+ * low level thread copy, only used by do_fork in kernel/fork.c
+ */
+int copy_thread(int nr, unsigned long clone_flags,
+ unsigned long usp, unsigned long topstk,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+
+ childregs = (struct pt_regs *)
+ (task_stack_page(p) + THREAD_SIZE - 8) - 1;
+
+ *childregs = *regs;
+
+ /*
+ * Set return value for child to be 0.
+ */
+ childregs->dn[0] = 0;
+
+ if (usp)
+ childregs->an[7] = usp;
+ else
+ childregs->an[7] = (unsigned long)task_stack_page(p) +
+ THREAD_SIZE - 8;
+
+ /*
+ * Set up the switch_to frame to return to "ret_from_fork"
+ */
+ p->thread.a5 = (unsigned long)ret_from_fork;
+ p->thread.sp = (unsigned long)childregs;
+
+ return 0;
+}
+
+/*
+ * sys_execve()
+ * executes a new program.
+ */
+asmlinkage int sys_execve(char *name, char **argv,
+ char **envp, struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ lock_kernel();
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ asm (" .global sys_execve_complete\n"
+ " sys_execve_complete:");
+out:
+ unlock_kernel();
+ return error;
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return tsk->thread.a5;
+}
+
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long pc;
+
+ /*
+ * If we don't have a process, or it is not the current
+ * one or not RUNNING, it makes no sense to ask for a
+ * wchan.
+ */
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ /*
+ * TODO: If the process is in the middle of schedule, we
+ * are supposed to do something different but for now we
+ * will return the same thing in both situations.
+ */
+ pc = thread_saved_pc(p);
+ if (in_sched_functions(pc))
+ return pc;
+ return pc;
+}
+
+/*
+ * __switch_to is the function that implements the contex save and
+ * switch within the kernel. Since this is a function call very few
+ * registers have to be saved to pull this off. d0 holds prev and we
+ * want to preserve it. prev_switch is a pointer to task->thread
+ * structure. This is where we will save the register state. next_switch
+ * is pointer to the next task's thread structure that holds the
+ * registers.
+ */
+asmlinkage void *__switch_to(struct task_struct *prev,
+ struct thread_struct *prev_switch,
+ struct thread_struct *next_switch)
+ __attribute__((naked));
--- /dev/null
+++ b/arch/ubicom32/kernel/processor.c
@@ -0,0 +1,258 @@
+/*
+ * arch/ubicom32/kernel/processor.c
+ * Ubicom32 architecture processor info implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/devtree.h>
+#include <asm/processor.h>
+#include <asm/cpu.h>
+
+struct procnode {
+ struct devtree_node dn;
+ unsigned int threads;
+ unsigned int timers;
+ unsigned int frequency;
+ unsigned int interrupt0;
+ unsigned int interrupt1;
+ void *socm;
+ void *eocm;
+ void *sdram;
+ void *edram;
+};
+
+struct procnode *pn;
+
+/*
+ * show_processorinfo()
+ * Print the actual processor information.
+ */
+static void show_processorinfo(struct seq_file *m)
+{
+ char *cpu, *mmu, *fpu;
+ unsigned int clockfreq;
+ unsigned int chipid;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+
+ asm volatile (
+ "move.4 %0, CHIP_ID \n\t"
+ : "=r" (chipid)
+ );
+
+ /*
+ * General Processor Information.
+ */
+ seq_printf(m, "Vendor:\t\t%s\n", "Ubicom");
+ seq_printf(m, "CPU:\t\t%s\n", cpu);
+ seq_printf(m, "MMU:\t\t%s\n", mmu);
+ seq_printf(m, "FPU:\t\t%s\n", fpu);
+ seq_printf(m, "Arch:\t\t%hx\n", chipid >> 16);
+ seq_printf(m, "Rev:\t\t%hx\n", (chipid & 0xffff));
+
+ /*
+ * Now compute the clock frequency in Mhz.
+ */
+ clockfreq = processor_frequency();
+ seq_printf(m, "Clock Freq:\t%u.%1u MHz\n",
+ clockfreq / 1000000,
+ (clockfreq / 100000) % 10);
+ seq_printf(m, "BogoMips:\t%lu.%02lu\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100);
+ seq_printf(m, "Calibration:\t%lu loops\n", (loops_per_jiffy * HZ));
+}
+
+/*
+ * show_cpuinfo()
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long n = (unsigned long)v - 1;
+
+#if defined(CONFIG_SMP)
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, n);
+#endif
+
+ /*
+ * Print the general processor information on the first
+ * call.
+ */
+ if (n == 0) {
+ show_processorinfo(m);
+ }
+
+#if defined(CONFIG_SMP)
+ /*
+ * For each hwthread, print if this hwthread is running Linux
+ * or is an I/O thread.
+ */
+ if (cpu_isset(n, cpu_online_map)) {
+ seq_printf(m, "cpu[%02lu]:\tthread id - %lu\n", n, p->tid);
+ } else {
+ seq_printf(m, "cpu[%02lu]:\toff-line\n", n);
+ }
+#endif
+ return 0;
+
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ unsigned long i = *pos;
+
+ return i < NR_CPUS ? (void *)(i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+/*
+ * processor_timers()
+ * Returns the timers available to Linux.
+ */
+unsigned int processor_timers(void)
+{
+ if (!pn) {
+ return 0;
+ }
+ return pn->timers;
+}
+
+/*
+ * processor_threads()
+ * Returns the threads available to Linux.
+ */
+unsigned int processor_threads(void)
+{
+ if (!pn) {
+ return 0;
+ }
+ return pn->threads;
+}
+
+/*
+ * processor_frequency()
+ * Returns the frequency of the system clock.
+ */
+unsigned int processor_frequency(void)
+{
+ if (!pn) {
+ return 0;
+ }
+ return pn->frequency;
+}
+EXPORT_SYMBOL(processor_frequency);
+
+/*
+ * processor_interrupts()
+ * Return the interrupts that are setup at boot time.
+ */
+int processor_interrupts(unsigned int *int0, unsigned int *int1)
+{
+ if (!pn) {
+ return -EFAULT;
+ }
+
+ if (int0) {
+ *int0 = pn->interrupt0;
+ }
+
+ if (int1) {
+ *int1 = pn->interrupt1;
+ }
+ return 0;
+}
+
+/*
+ * processor_ocm()
+ * Returns the OCM available to Linux.
+ */
+int processor_ocm(void **socm, void **eocm)
+{
+ if (!pn) {
+ return -ENOSYS;
+ }
+
+ *socm = pn->socm;
+ *eocm = pn->eocm;
+ return 0;
+}
+
+/*
+ * processor_dram()
+ * Returns the dram available to Linux.
+ */
+int processor_dram(void **sdram, void **edram)
+{
+ if (!pn) {
+ return -ENOSYS;
+ }
+
+ *sdram = pn->sdram;
+ *edram = pn->edram;
+ return 0;
+}
+
+void __init processor_init(void)
+{
+ /*
+ * If we do not have a trap node in the device tree, we leave the fault
+ * handling to the underlying hardware.
+ */
+ pn = (struct procnode *)devtree_find_node("processor");
+ if (!pn) {
+ printk(KERN_WARNING "processor node not found\n");
+ return;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/ptrace.c
@@ -0,0 +1,275 @@
+/*
+ * arch/ubicom32/kernel/ptrace.c
+ * Ubicom32 architecture ptrace implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * (C) 1994 by Hamish Macdonald
+ * Taken from linux/kernel/ptrace.c and modified for M680x0.
+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/uaccess.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+
+/*
+ * ptrace_getregs()
+ *
+ * Get all user integer registers.
+ */
+static inline int ptrace_getregs(struct task_struct *task, void __user *uregs)
+{
+ struct pt_regs *regs = task_pt_regs(task);
+ return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
+}
+
+/*
+ * ptrace_get_reg()
+ *
+ * Get contents of register REGNO in task TASK.
+ */
+static unsigned long ptrace_get_reg(struct task_struct *task, int regno)
+{
+ if (regno < sizeof(struct pt_regs)) {
+ struct pt_regs *pt_regs = task_pt_regs(task);
+ return *(unsigned long *)((long) pt_regs + regno);
+ }
+
+ return -EIO;
+}
+
+/*
+ * ptrace_put_reg()
+ * Write contents of register REGNO in task TASK.
+ */
+static int ptrace_put_reg(struct task_struct *task, int regno,
+ unsigned long data)
+{
+ if (regno <= sizeof(struct pt_regs) && regno != PT_FRAME_TYPE) {
+ struct pt_regs *pt_regs = task_pt_regs(task);
+ *(unsigned long *)((long) pt_regs + regno) = data;
+ return 0;
+ }
+ return -EIO;
+}
+
+/*
+ * ptrace_disable_single_step()
+ * Disable Single Step
+ */
+static int ptrace_disable_single_step(struct task_struct *task)
+{
+ /*
+ * Single Step not yet implemented, so must always be disabled
+ */
+ return 0;
+}
+
+/*
+ * ptrace_disable()
+ * Make sure the single step bit is not set.
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ ptrace_disable_single_step(child);
+}
+
+/*
+ * arch_ptrace()
+ * architecture specific ptrace routine.
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int ret;
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA:
+ ret = generic_ptrace_peekdata(child, addr, data);
+ break;
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if (((unsigned long) addr > PT_INTERP_FDPIC_LOADMAP)
+ || (addr & 3))
+ break;
+
+ tmp = 0; /* Default return condition */
+
+ ret = -EIO;
+ if (addr < sizeof(struct pt_regs)) {
+ tmp = ptrace_get_reg(child, addr);
+ } else if (addr == PT_TEXT_ADDR) {
+ tmp = child->mm->start_code;
+ } else if (addr == PT_TEXT_END_ADDR) {
+ tmp = child->mm->end_code;
+ } else if (addr == PT_DATA_ADDR) {
+ tmp = child->mm->start_data;
+ } else if (addr == PT_EXEC_FDPIC_LOADMAP) {
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ tmp = child->mm->context.exec_fdpic_loadmap;
+#endif
+ } else if (addr == PT_INTERP_FDPIC_LOADMAP) {
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ tmp = child->mm->context.interp_fdpic_loadmap;
+#endif
+ } else {
+ break;
+ }
+
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ case PTRACE_POKEDATA:
+ ret = generic_ptrace_pokedata(child, addr, data);
+
+ /*
+ * If we just changed some code so we need to
+ * correct the caches
+ */
+ if (request == PTRACE_POKETEXT && ret == 0) {
+ flush_icache_range(addr, addr + 4);
+ }
+ break;
+
+ case PTRACE_POKEUSR: /* write the word at location addr
+ * in the USER area */
+ ret = -EIO;
+
+ if (((unsigned long) addr > PT_DATA_ADDR) || (addr & 3))
+ break;
+
+ if (addr < sizeof(struct pt_regs)) {
+ ret = ptrace_put_reg(child, addr, data);
+ }
+ break;
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from)
+ * syscall */
+ case PTRACE_CONT: { /* restart after signal. */
+
+ ret = -EIO;
+ if (!valid_signal(data))
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ /* make sure the single step bit is not set. */
+ ptrace_disable_single_step(child);
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ /*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to exit.
+ */
+ case PTRACE_KILL: {
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ /* make sure the single step bit is not set. */
+ ptrace_disable_single_step(child);
+ wake_up_process(child);
+ break;
+ }
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ case PTRACE_GETREGS: /* Get all gp regs from the child. */
+ ptrace_getregs(child, (unsigned long *)data);
+ ret = 0;
+ break;
+
+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+ int i;
+ unsigned long tmp;
+ int count = sizeof(struct pt_regs) / sizeof(unsigned long);
+ for (i = 0; i < count; i++) {
+ if (get_user(tmp, (unsigned long *) data)) {
+ ret = -EFAULT;
+ break;
+ }
+ ptrace_put_reg(child, sizeof(unsigned long) * i, tmp);
+ data += sizeof(long);
+ }
+ ret = 0;
+ break;
+ }
+
+ default:
+ return ptrace_request(child, request, addr, data);
+ break;
+ }
+ return ret;
+}
+/*
+ * syscall_trace
+ *
+ * called by syscall enter/exit when the TIF_SYSCALL_TRACE bit is set.
+ */
+asmlinkage void syscall_trace(void)
+{
+ struct task_struct *cur = current;
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+ if (!(cur->ptrace & PT_PTRACED))
+ return;
+ ptrace_notify(SIGTRAP | ((cur->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (cur->exit_code) {
+ send_sig(cur->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/semaphore.c
@@ -0,0 +1,159 @@
+/*
+ * arch/ubicom32/kernel/semaphore.c
+ * Ubicom32 architecture semaphore implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * Generic semaphore code. Buyer beware. Do your own
+ * specific changes in <asm/semaphore-helper.h>
+ */
+
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <asm/semaphore-helper.h>
+
+#ifndef CONFIG_RMW_INSNS
+spinlock_t semaphore_wake_lock;
+#endif
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to sleep, while the "waking" variable is
+ * incremented when the "up()" code goes to wake up waiting
+ * processes.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * waking_non_zero() (from asm/semaphore.h) must execute
+ * atomically.
+ *
+ * When __up() is called, the count was negative before
+ * incrementing it, and we need to wake up somebody.
+ *
+ * This routine adds one to the count of processes that need to
+ * wake up and exit. ALL waiting processes actually wake up but
+ * only the one that gets to the "waking" field first will gate
+ * through and acquire the semaphore. The others will go back
+ * to sleep.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+void __up(struct semaphore *sem)
+{
+ wake_one_more(sem);
+ wake_up(&sem->wait);
+}
+
+/*
+ * Perform the "down" function. Return zero for semaphore acquired,
+ * return negative for signalled out of the function.
+ *
+ * If called from __down, the return is ignored and the wait loop is
+ * not interruptible. This means that a task waiting on a semaphore
+ * using "down()" cannot be killed until someone does an "up()" on
+ * the semaphore.
+ *
+ * If called from __down_interruptible, the return value gets checked
+ * upon return. If the return value is negative then the task continues
+ * with the negative value in the return register (it can be tested by
+ * the caller).
+ *
+ * Either form may be used in conjunction with "up()".
+ *
+ */
+
+
+#define DOWN_HEAD(task_state) \
+ \
+ \
+ current->state = (task_state); \
+ add_wait_queue(&sem->wait, &wait); \
+ \
+ /* \
+ * Ok, we're set up. sem->count is known to be less than zero \
+ * so we must wait. \
+ * \
+ * We can let go the lock for purposes of waiting. \
+ * We re-acquire it after awaking so as to protect \
+ * all semaphore operations. \
+ * \
+ * If "up()" is called before we call waking_non_zero() then \
+ * we will catch it right away. If it is called later then \
+ * we will have to go through a wakeup cycle to catch it. \
+ * \
+ * Multiple waiters contend for the semaphore lock to see \
+ * who gets to gate through and who has to wait some more. \
+ */ \
+ for (;;) {
+
+#define DOWN_TAIL(task_state) \
+ current->state = (task_state); \
+ } \
+ current->state = TASK_RUNNING; \
+ remove_wait_queue(&sem->wait, &wait);
+
+void __sched __down(struct semaphore *sem)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ DOWN_HEAD(TASK_UNINTERRUPTIBLE)
+ if (waking_non_zero(sem))
+ break;
+ schedule();
+ DOWN_TAIL(TASK_UNINTERRUPTIBLE)
+}
+
+int __sched __down_interruptible(struct semaphore *sem)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int ret = 0;
+
+ DOWN_HEAD(TASK_INTERRUPTIBLE)
+
+ ret = waking_non_zero_interruptible(sem, current);
+ if (ret) {
+ if (ret == 1)
+ /* ret != 0 only if we get interrupted -arca */
+ ret = 0;
+ break;
+ }
+ schedule();
+ DOWN_TAIL(TASK_INTERRUPTIBLE)
+ return ret;
+}
+
+int __down_trylock(struct semaphore *sem)
+{
+ return waking_non_zero_trylock(sem);
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/setup.c
@@ -0,0 +1,189 @@
+/*
+ * arch/ubicom32/kernel/setup.c
+ * Ubicom32 architecture-dependent parts of system setup.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org>
+ * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1995 Hamish Macdonald
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
+ * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+
+#include <asm/devtree.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/ubicom32-common.h>
+#include <asm/processor.h>
+#include <asm/bootargs.h>
+#include <asm/thread.h>
+
+unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+
+unsigned long memory_end;
+EXPORT_SYMBOL(memory_end);
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
+
+extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
+
+/*
+ * setup_arch()
+ * Setup the architecture dependent portions of the system.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+
+ processor_init();
+ bootargs_init();
+
+ /*
+ * TODO: The memory regions should really come from the
+ * processor node.
+ */
+ memory_start = PAGE_ALIGN(((unsigned long)&_end));
+ memory_end = CONFIG_RAMBASE+CONFIG_RAMSIZE;
+
+ init_mm.start_code = (unsigned long) &_stext;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) 0;
+
+ strlcpy(boot_command_line, bootargs_get_cmdline(), COMMAND_LINE_SIZE);
+
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ parse_early_param();
+
+ printk(KERN_INFO "%s Processor, Ubicom, Inc. <www.ubicom.com>\n", CPU);
+
+#if defined(DEBUG)
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
+ "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
+ (int) &_sdata, (int) &_edata,
+ (int) &_sbss, (int) &_ebss);
+ printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
+ (int) &_ebss, (int) memory_start,
+ (int) memory_start, (int) memory_end);
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE-1] = 0;
+
+#ifdef DEBUG
+ if (strlen(*cmdline_p))
+ printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
+#endif
+
+#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+
+ /*
+ * If we have a device tree, see if we have the nodes we need.
+ */
+ if (devtree) {
+ devtree_print();
+ }
+
+ /*
+ * From the arm initialization comment:
+ *
+ * This doesn't seem to be used by the Linux memory manager any
+ * more, but is used by ll_rw_block. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ *
+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+ * the system, not the maximum PFN.
+ */
+ max_pfn = max_low_pfn = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT;
+
+ /*
+ * Give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory.
+ */
+ bootmap_size = init_bootmem_node(
+ NODE_DATA(0),
+ memory_start >> PAGE_SHIFT, /* map goes here */
+ PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
+ memory_end >> PAGE_SHIFT);
+ /*
+ * Free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ free_bootmem(memory_start, memory_end - memory_start);
+ reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
+
+ /*
+ * Get kmalloc into gear.
+ */
+ paging_init();
+
+ /*
+ * Fix up the thread_info structure, indicate this is a mainline Linux
+ * thread and setup the sw_ksp().
+ */
+ sw_ksp[thread_get_self()] = (unsigned int) current_thread_info();
+ thread_set_mainline(thread_get_self());
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/signal.c
@@ -0,0 +1,458 @@
+/*
+ * arch/ubicom32/kernel/signal.c
+ * Ubicom32 architecture signal handling implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Linux/m68k support by Hamish Macdonald
+ * 68060 fixes by Jesper Skov
+ * 1997-12-01 Modified for POSIX.1b signals by Andreas Schwab
+ * mathemu support by Roman Zippel
+ * ++roman (07/09/96): implemented signal stacks
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * mathemu support by Roman Zippel
+ * (Note: fpstate in the signal context is completely ignored for the emulator
+ * and the internal floating point format is put on stack)
+ *
+ * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
+ * Atari :-) Current limitation: Only one sigstack can be active at one time.
+ * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
+ * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
+ * signal handlers!
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/highuid.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+
+#include <asm/setup.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * asm signal return handlers.
+ */
+void ret_from_user_signal(void);
+void ret_from_user_rt_signal(void);
+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Common signal suspend implementation
+ */
+static int signal_suspend(sigset_t *saveset, struct pt_regs *regs)
+{
+ regs->dn[0] = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (!do_signal(saveset, regs)) {
+ continue;
+ }
+ /*
+ * If the current frame type is a signal trampoline we are
+ * actually going to call the signal handler so we return the
+ * desired d0 as the return value.
+ */
+ if (regs->frame_type == UBICOM32_FRAME_TYPE_SIGTRAMP) {
+ return regs->dn[0];
+ }
+ return -EINTR;
+ }
+ /*
+ * Should never get here
+ */
+ BUG();
+ return 0;
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int do_sigsuspend(struct pt_regs *regs)
+{
+ old_sigset_t mask = regs->dn[0];
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ siginitset(&current->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ /*
+ * Call common handler
+ */
+ return signal_suspend(&saveset, regs);
+}
+
+asmlinkage int
+do_rt_sigsuspend(struct pt_regs *regs)
+{
+ sigset_t *unewset = (sigset_t *)regs->dn[0];
+ size_t sigsetsize = (size_t)regs->dn[1];
+ sigset_t saveset, newset;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, unewset, sizeof(newset)))
+ return -EFAULT;
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ /*
+ * Call common handler
+ */
+ return signal_suspend(&saveset, regs);
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction *act,
+ struct old_sigaction *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+asmlinkage int
+do_sys_sigaltstack(struct pt_regs *regs)
+{
+ const stack_t *uss = (stack_t *) regs->dn[0];
+ stack_t *uoss = (stack_t *)regs->dn[1];
+ return do_sigaltstack(uss, uoss, regs->an[7]);
+}
+
+/*
+ * fdpic_func_descriptor describes sa_handler when the application is FDPIC
+ */
+struct fdpic_func_descriptor {
+ unsigned long text;
+ unsigned long GOT;
+};
+
+/*
+ * rt_sigframe is stored on the user stack immediately before (above)
+ * the signal handlers stack.
+ */
+struct rt_sigframe
+{
+ unsigned long syscall_number; /* This holds __NR_rt_sigreturn. */
+ unsigned long restore_all_regs; /* This field gets set to 1 if the frame
+ * type is TRAP or INTERRUPT. */
+ siginfo_t *info;
+ struct ucontext uc;
+ int sig;
+ void *pretcode;
+};
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+asmlinkage int do_sigreturn(unsigned long __unused)
+{
+ BUG();
+ return 0;
+}
+
+asmlinkage int do_rt_sigreturn(struct pt_regs *regs)
+{
+ unsigned long usp = regs->an[7];
+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
+ sigset_t set;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (copy_from_user(regs, &frame->uc.uc_mcontext, sizeof(struct pt_regs)))
+ goto badframe;
+ return regs->dn[0];
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static inline void *
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+{
+ unsigned long usp;
+
+ /* Default to using normal stack. */
+ usp = regs->an[7];
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!sas_ss_flags(usp))
+ usp = current->sas_ss_sp + current->sas_ss_size;
+ }
+ return (void *)((usp - frame_size) & ~0x3);
+}
+
+/*
+ * signal_trampoline: Defined in ubicom32_syscall.S
+ */
+asmlinkage void signal_trampoline(void)__attribute__((naked));
+
+static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+
+ frame = (struct rt_sigframe *) get_sigframe(ka, regs, sizeof(*frame));
+
+ /*
+ * The 'err |=' have been may criticized as bad code style, but I
+ * strongly suspect that we want this code to be fast. So for
+ * now it stays as is.
+ */
+ err |= __put_user( ( (current_thread_info()->exec_domain)
+ && (current_thread_info()->exec_domain->signal_invmap)
+ && (sig < 32) )
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig, &frame->sig);
+ err |= __put_user(info, &frame->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user((void *)current->sas_ss_sp,
+ &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->an[7]),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= __put_user(__NR_rt_sigreturn, &frame->syscall_number);
+ if ((regs->frame_type == UBICOM32_FRAME_TYPE_TRAP) ||
+ (regs->frame_type == UBICOM32_FRAME_TYPE_INTERRUPT)) {
+ err |= __put_user(1, &frame->restore_all_regs);
+ } else {
+ err |= __put_user(0, &frame->restore_all_regs);
+ }
+ err |= copy_to_user (&frame->uc.uc_mcontext.sc_regs, regs, sizeof(struct pt_regs));
+ err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * Set up registers for signal handler NOTE: Do not modify dn[14], it
+ * contains the userspace tls pointer, so it important that it carries
+ * over to the signal handler.
+ */
+ regs->an[7] = (unsigned long)frame;
+ regs->pc = (unsigned long) signal_trampoline;
+ regs->an[5] = (unsigned long) signal_trampoline;
+ regs->dn[0] = sig;
+ regs->dn[1] = (unsigned long) frame->info;
+ regs->dn[2] = (unsigned int) &frame->uc;
+
+ /*
+ * If this is FDPIC then the signal handler is actually a function
+ * descriptor.
+ */
+ if (current->personality & FDPIC_FUNCPTRS) {
+ struct fdpic_func_descriptor __user *funcptr =
+ (struct fdpic_func_descriptor *) ka->sa.sa_handler;
+ err |= __get_user(regs->dn[3], &funcptr->text);
+ err |= __get_user(regs->an[0], &funcptr->GOT);
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * The funcdesc must be in a3 as this is required for the lazy
+ * resolver in ld.so, if the application is not FDPIC a3 is not
+ * used.
+ */
+ regs->an[3] = (unsigned long) funcptr;
+
+ } else {
+ regs->dn[3] = (unsigned long)ka->sa.sa_handler;
+ regs->an[0] = 0;
+ }
+
+ regs->frame_type = UBICOM32_FRAME_TYPE_SIGTRAMP;
+
+ return;
+
+give_sigsegv:
+ /* user space exception */
+ force_sigsegv(sig, current);
+}
+
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+ switch (regs->dn[0]) {
+ case -ERESTARTNOHAND:
+ if (!has_handler)
+ goto do_restart;
+ regs->dn[0] = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+ regs->dn[0] = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ do_restart:
+ regs->dn[0] = regs->original_dn_0;
+ regs->pc -= 8;
+ regs->an[5] -= 8;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ /* are we from a system call? */
+ if (regs->frame_type == -1)
+ /* If so, check system call restarting.. */
+ handle_restart(regs, ka, 1);
+
+ /* set up the stack frame */
+ setup_rt_frame(sig, ka, info, oldset, regs);
+
+ if (ka->sa.sa_flags & SA_ONESHOT)
+ ka->sa.sa_handler = SIG_DFL;
+
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&current->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
+{
+ struct k_sigaction ka;
+ siginfo_t info;
+ int signr;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (!user_mode(regs))
+ return 1;
+
+ if (!oldset)
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ handle_signal(signr, &ka, &info, oldset, regs);
+ return 1;
+ }
+
+ /* Did we come from a system call? */
+ if (regs->frame_type == -1) {
+ /* Restart the system call - no handlers present */
+ handle_restart(regs, NULL, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * sys_sigreturn()
+ * Return handler for signal clean-up.
+ *
+ * NOTE: Ubicom32 does not use this syscall. Instead we rely
+ * on do_rt_sigreturn().
+ */
+asmlinkage long sys_sigreturn(void)
+{
+ return -ENOSYS;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/smp.c
@@ -0,0 +1,808 @@
+/*
+ * arch/ubicom32/kernel/smp.c
+ * SMP implementation for Ubicom32 processors.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2001,2004 Grant Grundler <grundler@parisc-linux.org>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/profile.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/irq.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/current.h>
+#include <asm/tlbflush.h>
+#include <asm/timex.h>
+#include <asm/cpu.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/thread.h>
+#include <asm/sections.h>
+#include <asm/ip5000.h>
+
+/*
+ * Mask the debug printout for IPI because they are too verbose
+ * for regular debugging.
+ */
+
+// #define DEBUG_SMP 1
+#if !defined(DEBUG_SMP)
+#define smp_debug(lvl, ...)
+#else
+static unsigned int smp_debug_lvl = 50;
+#define smp_debug(lvl, printargs...) \
+ if (lvl >= smp_debug_lvl) { \
+ printk(printargs); \
+ }
+#endif
+
+#if !defined(DEBUG_SMP)
+#define DEBUG_ASSERT(cond)
+#else
+#define DEBUG_ASSERT(cond) \
+ if (!(cond)) { \
+ THREAD_STALL; \
+ }
+#endif
+
+/*
+ * List of IPI Commands (more than one can be set at a time).
+ */
+enum ipi_message_type {
+ IPI_NOP,
+ IPI_RESCHEDULE,
+ IPI_CALL_FUNC,
+ IPI_CALL_FUNC_SINGLE,
+ IPI_CPU_STOP,
+ IPI_CPU_TIMER,
+};
+
+/*
+ * These values are properly adjusted by smp_prepare_cpus() below. They are
+ * required to be declared in the arch directory if CONFIG_SMP is set.
+ */
+cpumask_t cpu_online_map = CPU_MASK_NONE; /* Bitmap of online CPUs */
+EXPORT_SYMBOL(cpu_online_map);
+
+cpumask_t cpu_possible_map = CPU_MASK_ALL; /* Bitmap of Present CPUs */
+EXPORT_SYMBOL(cpu_possible_map);
+
+/*
+ * We maintain a hardware thread oriented view of online threads
+ * and those involved or needing IPI.
+ */
+static unsigned long smp_online_threads = 0;
+static unsigned long smp_needs_ipi = 0;
+static unsigned long smp_inside_ipi = 0;
+static unsigned long smp_irq_affinity[NR_IRQS];
+
+/*
+ * What do we need to track on a per cpu/thread basis?
+ */
+DEFINE_PER_CPU(struct cpuinfo_ubicom32, cpu_data);
+
+/*
+ * Each thread cpuinfo IPI information is guarded by a lock
+ * that is kept local to this file.
+ */
+DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
+
+/*
+ * The IPI(s) are based on a software IRQ through the LDSR.
+ */
+unsigned int smp_ipi_irq;
+
+/*
+ * Define a spinlock so that only one cpu is able to modify the
+ * smp_needs_ipi and to set/clear the IRQ at a time.
+ */
+DEFINE_SPINLOCK(smp_ipi_lock);
+
+/*
+ * smp_halt_processor()
+ * Halt this hardware thread.
+ */
+static void smp_halt_processor(void)
+{
+ int cpuid = thread_get_self();
+ cpu_clear(smp_processor_id(), cpu_online_map);
+ local_irq_disable();
+ printk(KERN_EMERG "cpu[%d] has halted. It is not OK to turn off power \
+ until all cpu's are off.\n", cpuid);
+ for (;;) {
+ thread_suspend();
+ }
+}
+
+/*
+ * ipi_interrupt()
+ * Handle an Interprocessor Interrupt.
+ */
+static irqreturn_t ipi_interrupt(int irq, void *dev_id)
+{
+ int cpuid = smp_processor_id();
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
+ unsigned long ops;
+
+ /*
+ * Count this now; we may make a call that never returns.
+ */
+ p->ipi_count++;
+
+ /*
+ * We are about to process all ops. If another cpu has stated
+ * that we need an IPI, we will have already processed it. By
+ * clearing our smp_needs_ipi, and processing all ops,
+ * we reduce the number of IPI interrupts. However, this introduces
+ * the possibility that smp_needs_ipi will be clear and the soft irq
+ * will have gone off; so we need to make the get_affinity() path
+ * tolerant of spurious interrupts.
+ */
+ spin_lock(&smp_ipi_lock);
+ smp_needs_ipi &= ~p->tid;
+ spin_unlock(&smp_ipi_lock);
+
+ for (;;) {
+ /*
+ * Read the set of IPI commands we should handle.
+ */
+ spinlock_t *lock = &per_cpu(ipi_lock, cpuid);
+ spin_lock(lock);
+ ops = p->ipi_pending;
+ p->ipi_pending = 0;
+ spin_unlock(lock);
+
+ /*
+ * If we have no IPI commands to execute, break out.
+ */
+ if (!ops) {
+ break;
+ }
+
+ /*
+ * Execute the set of commands in the ops word, one command
+ * at a time in no particular order. Strip of each command
+ * as we execute it.
+ */
+ while (ops) {
+ unsigned long which = ffz(~ops);
+ ops &= ~(1 << which);
+
+ BUG_ON(!irqs_disabled());
+ switch (which) {
+ case IPI_NOP:
+ smp_debug(100, KERN_INFO "cpu[%d]: "
+ "IPI_NOP\n", cpuid);
+ break;
+
+ case IPI_RESCHEDULE:
+ /*
+ * Reschedule callback. Everything to be
+ * done is done by the interrupt return path.
+ */
+ smp_debug(200, KERN_INFO "cpu[%d]: "
+ "IPI_RESCHEDULE\n", cpuid);
+ break;
+
+ case IPI_CALL_FUNC:
+ smp_debug(100, KERN_INFO "cpu[%d]: "
+ "IPI_CALL_FUNC\n", cpuid);
+ generic_smp_call_function_interrupt();
+ break;
+
+ case IPI_CALL_FUNC_SINGLE:
+ smp_debug(100, KERN_INFO "cpu[%d]: "
+ "IPI_CALL_FUNC_SINGLE\n", cpuid);
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ case IPI_CPU_STOP:
+ smp_debug(100, KERN_INFO "cpu[%d]: "
+ "IPI_CPU_STOP\n", cpuid);
+ smp_halt_processor();
+ break;
+
+#if !defined(CONFIG_LOCAL_TIMERS)
+ case IPI_CPU_TIMER:
+ smp_debug(100, KERN_INFO "cpu[%d]: "
+ "IPI_CPU_TIMER\n", cpuid);
+#if defined(CONFIG_GENERIC_CLOCKEVENTS)
+ local_timer_interrupt();
+#else
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
+#endif
+#endif
+ break;
+
+ default:
+ printk(KERN_CRIT "cpu[%d]: "
+ "Unknown IPI: %lu\n", cpuid, which);
+
+ return IRQ_NONE;
+ }
+
+ /*
+ * Let in any pending interrupts
+ */
+ BUG_ON(!irqs_disabled());
+ local_irq_enable();
+ local_irq_disable();
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * ipi_send()
+ * Send an Interprocessor Interrupt.
+ */
+static void ipi_send(int cpu, enum ipi_message_type op)
+{
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
+ spinlock_t *lock = &per_cpu(ipi_lock, cpu);
+ unsigned long flags;
+
+ /*
+ * We protect the setting of the ipi_pending field and ensure
+ * that the ipi delivery mechanism and interrupt are atomically
+ * handled.
+ */
+ spin_lock_irqsave(lock, flags);
+ p->ipi_pending |= 1 << op;
+ spin_unlock_irqrestore(lock, flags);
+
+ spin_lock_irqsave(&smp_ipi_lock, flags);
+ smp_needs_ipi |= (1 << p->tid);
+ ubicom32_set_interrupt(smp_ipi_irq);
+ spin_unlock_irqrestore(&smp_ipi_lock, flags);
+}
+
+/*
+ * ipi_send_mask
+ * Send an IPI to each cpu in mask.
+ */
+static inline void ipi_send_mask(unsigned int op, cpumask_t mask)
+{
+ int cpu;
+ for_each_cpu_mask(cpu, mask) {
+ ipi_send(cpu, op);
+ }
+}
+
+/*
+ * ipi_send_allbutself()
+ * Send an IPI to all threads but ourselves.
+ */
+static inline void ipi_send_allbutself(unsigned int op)
+{
+ int self = smp_processor_id();
+ cpumask_t result = cpu_online_map;
+ cpu_clear(self, result);
+ ipi_send_mask(op, result);
+}
+
+/*
+ * smp_enable_vector()
+ */
+static void smp_enable_vector(unsigned int irq)
+{
+ ubicom32_clear_interrupt(smp_ipi_irq);
+ ldsr_enable_vector(irq);
+}
+
+/*
+ * smp_disable_vector()
+ * Disable the interrupt by clearing the appropriate bit in the
+ * LDSR Mask Register.
+ */
+static void smp_disable_vector(unsigned int irq)
+{
+ ldsr_disable_vector(irq);
+}
+
+/*
+ * smp_mask_vector()
+ */
+static void smp_mask_vector(unsigned int irq)
+{
+ ldsr_mask_vector(irq);
+}
+
+/*
+ * smp_unmask_vector()
+ */
+static void smp_unmask_vector(unsigned int irq)
+{
+ ldsr_unmask_vector(irq);
+}
+
+/*
+ * smp_end_vector()
+ * Called once an interrupt is completed (reset the LDSR mask).
+ */
+static void smp_end_vector(unsigned int irq)
+{
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, smp_processor_id());
+ spin_lock(&smp_ipi_lock);
+ smp_inside_ipi &= ~(1 << p->tid);
+ if (smp_inside_ipi) {
+ spin_unlock(&smp_ipi_lock);
+ return;
+ }
+ spin_unlock(&smp_ipi_lock);
+ ldsr_unmask_vector(irq);
+}
+
+/*
+ * Special hanlder functions for SMP.
+ */
+static struct irq_chip ubicom32_smp_chip = {
+ .name = "UbicoIPI",
+ .startup = NULL,
+ .shutdown = NULL,
+ .enable = smp_enable_vector,
+ .disable = smp_disable_vector,
+ .ack = NULL,
+ .mask = smp_mask_vector,
+ .unmask = smp_unmask_vector,
+ .end = smp_end_vector,
+};
+
+/*
+ * smp_reset_ipi()
+ * None of these cpu(s) got their IPI, turn it back on.
+ *
+ * Note: This is called by the LDSR which is not a full
+ * Linux cpu. Thus you must use the raw form of locks
+ * because lock debugging will not work on the partial
+ * cpu nature of the LDSR.
+ */
+void smp_reset_ipi(unsigned long mask)
+{
+ __raw_spin_lock(&smp_ipi_lock.raw_lock);
+ smp_needs_ipi |= mask;
+ smp_inside_ipi &= ~mask;
+ ubicom32_set_interrupt(smp_ipi_irq);
+ __raw_spin_unlock(&smp_ipi_lock.raw_lock);
+}
+
+/*
+ * smp_get_affinity()
+ * Choose the thread affinity for this interrupt.
+ *
+ * Note: This is called by the LDSR which is not a full
+ * Linux cpu. Thus you must use the raw form of locks
+ * because lock debugging will not work on the partial
+ * cpu nature of the LDSR.
+ */
+unsigned long smp_get_affinity(unsigned int irq, int *all)
+{
+ unsigned long mask = 0;
+
+ /*
+ * Most IRQ(s) are delivered in a round robin fashion.
+ */
+ if (irq != smp_ipi_irq) {
+ unsigned long result = smp_irq_affinity[irq] & smp_online_threads;
+ DEBUG_ASSERT(result);
+ *all = 0;
+ return result;
+ }
+
+ /*
+ * This is an IPI request. Return all cpu(s) scheduled for an IPI.
+ * We also track those cpu(s) that are going to be "receiving" IPI this
+ * round. When all CPU(s) have called smp_end_vector(),
+ * we will unmask the IPI interrupt.
+ */
+ __raw_spin_lock(&smp_ipi_lock.raw_lock);
+ ubicom32_clear_interrupt(smp_ipi_irq);
+ if (smp_needs_ipi) {
+ mask = smp_needs_ipi;
+ smp_inside_ipi |= smp_needs_ipi;
+ smp_needs_ipi = 0;
+ }
+ __raw_spin_unlock(&smp_ipi_lock.raw_lock);
+ *all = 1;
+ return mask;
+}
+
+/*
+ * smp_set_affinity()
+ * Set the affinity for this irq but store the value in tid(s).
+ */
+void smp_set_affinity(unsigned int irq, cpumask_t dest)
+{
+ int cpuid;
+ unsigned long *paffinity = &smp_irq_affinity[irq];
+
+ /*
+ * If none specified, all cpus are allowed.
+ */
+ if (cpus_empty(dest)) {
+ *paffinity = 0xffffffff;
+ return;
+ }
+
+ /*
+ * Make sure to clear the old value before setting up the
+ * list.
+ */
+ *paffinity = 0;
+ for_each_cpu_mask(cpuid, dest) {
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
+ *paffinity |= (1 << p->tid);
+ }
+}
+
+/*
+ * smp_send_stop()
+ * Send a stop request to all CPU but this one.
+ */
+void smp_send_stop(void)
+{
+ ipi_send_allbutself(IPI_CPU_STOP);
+}
+
+/*
+ * smp_send_timer_all()
+ * Send all cpu(s) but this one, a request to update times.
+ */
+void smp_send_timer_all(void)
+{
+ ipi_send_allbutself(IPI_CPU_TIMER);
+}
+
+/*
+ * smp_timer_broadcast()
+ * Use an IPI to broadcast a timer message
+ */
+void smp_timer_broadcast(cpumask_t mask)
+{
+ ipi_send_mask(IPI_CPU_TIMER, mask);
+}
+
+/*
+ * smp_send_reschedule()
+ * Send a reschedule request to the specified cpu.
+ */
+void smp_send_reschedule(int cpu)
+{
+ ipi_send(cpu, IPI_RESCHEDULE);
+}
+
+/*
+ * arch_send_call_function_ipi()
+ * Cause each cpu in the mask to call the generic function handler.
+ */
+void arch_send_call_function_ipi(cpumask_t mask)
+{
+ int cpu;
+ for_each_cpu_mask(cpu, mask) {
+ ipi_send(cpu, IPI_CALL_FUNC);
+ }
+}
+
+/*
+ * arch_send_call_function_single_ipi()
+ * Cause the specified cpu to call the generic function handler.
+ */
+void arch_send_call_function_single_ipi(int cpu)
+{
+ ipi_send(cpu, IPI_CALL_FUNC_SINGLE);
+}
+
+/*
+ * smp_mainline_start()
+ * Start a slave thread executing a mainline Linux context.
+ */
+static void __init smp_mainline_start(void *arg)
+{
+ int cpuid = smp_processor_id();
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid);
+
+ BUG_ON(p->tid != thread_get_self());
+
+ /*
+ * Well, support 2.4 linux scheme as well.
+ */
+ if (cpu_test_and_set(cpuid, cpu_online_map)) {
+ printk(KERN_CRIT "cpu[%d]: already initialized!\n", cpuid);
+ smp_halt_processor();
+ return;
+ }
+
+ /*
+ * Initialise the idle task for this CPU
+ */
+ atomic_inc(&init_mm.mm_count);
+ current->active_mm = &init_mm;
+ if (current->mm) {
+ printk(KERN_CRIT "cpu[%d]: idle task already has memory "
+ "management\n", cpuid);
+ smp_halt_processor();
+ return;
+ }
+
+ /*
+ * TODO: X86 does this prior to calling notify, try to understand why?
+ */
+ preempt_disable();
+
+#if defined(CONFIG_GENERIC_CLOCKEVENTS)
+ /*
+ * Setup a local timer event so that this cpu will get timer interrupts
+ */
+ if (local_timer_setup(cpuid) == -1) {
+ printk(KERN_CRIT "cpu[%d]: timer alloc failed\n", cpuid);
+ smp_halt_processor();
+ return;
+ }
+#endif
+
+ /*
+ * Notify those interested that we are up and alive. This must
+ * be done before interrupts are enabled. It must also be completed
+ * before the bootstrap cpu returns from __cpu_up() (see comment
+ * above cpu_set() of the cpu_online_map).
+ */
+ notify_cpu_starting(cpuid);
+
+ /*
+ * Indicate that this thread is now online and present. Setting
+ * cpu_online_map has the side effect of allowing the bootstrap
+ * cpu to continue along; so anything that MUST be done prior to the
+ * bootstrap cpu returning from __cpu_up() needs to go above here.
+ */
+ cpu_set(cpuid, cpu_online_map);
+ cpu_set(cpuid, cpu_present_map);
+
+ /*
+ * Maintain a thread mapping in addition to the cpu mapping.
+ */
+ smp_online_threads |= (1 << p->tid);
+
+ /*
+ * Enable interrupts for this thread.
+ */
+ local_irq_enable();
+
+ /*
+ * Enter the idle loop and wait for a timer to schedule some work.
+ */
+ printk(KERN_INFO "cpu[%d]: entering cpu_idle()\n", cpuid);
+ cpu_idle();
+
+ /* Not Reached */
+}
+
+/*
+ * smp_cpus_done()
+ * Called once the kernel_init() has brought up all cpu(s).
+ */
+void smp_cpus_done(unsigned int cpu_max)
+{
+ /* Do Nothing */
+}
+
+/*
+ * __cpu_up()
+ * Called to startup a sepcific cpu.
+ */
+int __cpuinit __cpu_up(unsigned int cpu)
+{
+ struct task_struct *idle;
+ unsigned int *stack;
+ long timeout;
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu);
+
+ /*
+ * Create an idle task for this CPU.
+ */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle)) {
+ panic("cpu[%d]: fork failed\n", cpu);
+ return -ENOSYS;
+ }
+ task_thread_info(idle)->cpu = cpu;
+
+ /*
+ * Setup the sw_ksp[] to point to this new task.
+ */
+ sw_ksp[p->tid] = (unsigned int)idle->stack;
+ stack = (unsigned int *)(sw_ksp[p->tid] + PAGE_SIZE - 8);
+
+ /*
+ * Cause the specified thread to execute our smp_mainline_start
+ * function as a TYPE_NORMAL thread.
+ */
+ printk(KERN_INFO "cpu[%d]: launching mainline Linux thread\n", cpu);
+ if (thread_start(p->tid, smp_mainline_start, (void *)NULL, stack,
+ THREAD_TYPE_NORMAL) == -1) {
+ printk(KERN_WARNING "cpu[%d]: failed thread_start\n", cpu);
+ return -ENOSYS;
+ }
+
+ /*
+ * Wait for the thread to start up. The thread will set
+ * the online bit when it is running. Our caller execpts the
+ * cpu to be online if we return 0.
+ */
+ for (timeout = 0; timeout < 10000; timeout++) {
+ if (cpu_online(cpu)) {
+ break;
+ }
+
+ udelay(100);
+ barrier();
+ continue;
+ }
+
+ if (!cpu_online(cpu)) {
+ printk(KERN_CRIT "cpu[%d]: failed to live after %ld us\n",
+ cpu, timeout * 100);
+ return -ENOSYS;
+ }
+
+ printk(KERN_INFO "cpu[%d]: came alive after %ld us\n",
+ cpu, timeout * 100);
+ return 0;
+}
+
+/*
+ * Data used by setup_irq for the IPI.
+ */
+static struct irqaction ipi_irq = {
+ .name = "ipi",
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .handler = ipi_interrupt,
+};
+
+/*
+ * smp_prepare_cpus()
+ * Mark threads that are available to Linux as possible cpus(s).
+ */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /*
+ * We will need a software IRQ to send IPI(s). We will use
+ * a single software IRQ for all IPI(s).
+ */
+ if (irq_soft_alloc(&smp_ipi_irq) < 0) {
+ panic("no software IRQ is available\n");
+ return;
+ }
+
+ /*
+ * For the IPI interrupt, we want to use our own chip definition.
+ * This allows us to define what happens in SMP IPI without affecting
+ * the performance of the other interrupts.
+ *
+ * Next, Register the IPI interrupt function against the soft IRQ.
+ */
+ set_irq_chip(smp_ipi_irq, &ubicom32_smp_chip);
+ setup_irq(smp_ipi_irq, &ipi_irq);
+
+ /*
+ * We use the device tree node to determine how many
+ * free cpus we will have (up to NR_CPUS) and we indicate
+ * that those cpus are present.
+ *
+ * We need to do this very early in the SMP case
+ * because the Linux init code uses the cpu_present_map.
+ */
+ for_each_possible_cpu(i) {
+ thread_t tid;
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, i);
+
+ /*
+ * Skip the bootstrap cpu
+ */
+ if (i == 0) {
+ continue;
+ }
+
+ /*
+ * If we have a free thread left in the mask,
+ * indicate that the cpu is present.
+ */
+ tid = thread_alloc();
+ if (tid == (thread_t)-1) {
+ break;
+ }
+
+ /*
+ * Save the hardware thread id for this cpu.
+ */
+ p->tid = tid;
+ cpu_set(i, cpu_present_map);
+ printk(KERN_INFO "cpu[%d]: added to cpu_present_map - tid: %d\n", i, tid);
+ }
+}
+
+/*
+ * smp_prepare_boot_cpu()
+ * Copy the per_cpu data into the appropriate spot for the bootstrap cpu.
+ *
+ * The code in boot_cpu_init() has already set the boot cpu's
+ * state in the possible, present, and online maps.
+ */
+void __devinit smp_prepare_boot_cpu(void)
+{
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
+
+ smp_online_threads |= (1 << p->tid);
+ printk(KERN_INFO "cpu[%d]: bootstrap CPU online - tid: %ld\n",
+ current_thread_info()->cpu, p->tid);
+}
+
+/*
+ * smp_setup_processor_id()
+ * Set the current_thread_info() structure cpu value.
+ *
+ * We set the value to the true hardware thread value that we are running on.
+ * NOTE: this function overrides the weak alias function in main.c
+ */
+void __init smp_setup_processor_id(void)
+{
+ struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0);
+ current_thread_info()->cpu = 0;
+ p->tid = thread_get_self();
+}
+
+/*
+ * setup_profiling_timer()
+ * Dummy function created to keep Oprofile happy in the SMP case.
+ */
+int setup_profiling_timer(unsigned int multiplier)
+{
+ return 0;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/stacktrace.c
@@ -0,0 +1,243 @@
+/*
+ * arch/ubicom32/kernel/stacktrace.c
+ * Ubicom32 architecture stack back trace implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/module.h>
+#include <asm/stacktrace.h>
+#include <asm/thread.h>
+
+/*
+ * These symbols are filled in by the linker.
+ */
+extern unsigned long _stext;
+extern unsigned long _etext;
+
+extern unsigned long __ocm_text_run_begin;
+extern unsigned long __data_begin;
+
+/*
+ * stacktrace_iterate()
+ * Walk the stack looking for call and calli instructions on an aligned
+ * boundary.
+ *
+ * Trace must point to the top of the current stack frame.
+ */
+unsigned long stacktrace_iterate(unsigned long **trace,
+ unsigned long stext,
+ unsigned long etext,
+ unsigned long ocm_stext,
+ unsigned long ocm_etext,
+ unsigned long sstack,
+ unsigned long estack)
+{
+ unsigned int thread_trap_en, instruction;
+ unsigned long address;
+ unsigned int limit = 0;
+ unsigned long result = 0;
+ unsigned long *sp = *trace;
+
+ /*
+ * Exclude the current thread from being monitored for traps.
+ */
+ asm volatile(
+ " thread_get_self_mask d15 \n\t"
+ /* save current trap status */
+ " and.4 %0, MT_TRAP_EN, d15 \n\t"
+ " not.4 d15, d15 \n\t"
+ /* disable trap */
+ " and.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
+ " pipe_flush 0 \n\t"
+ : "=r" (thread_trap_en)
+ :
+ : "d15", "cc"
+ );
+
+ while (limit++ < 256) {
+ /*
+ * See if we have a valid stack.
+ */
+ if (!between((unsigned long)sp, sstack, estack)) {
+#ifdef TRAP_DEBUG_STACK_TRACE
+ printk(KERN_EMERG "stack address is out of range - "
+ "sp: %x, sstack: %x, estack: %x\n",
+ (unsigned int)sp, (unsigned int)sstack,
+ (unsigned int)estack);
+#endif
+ result = 0;
+ *trace = 0;
+ break;
+ }
+
+ /*
+ * Get the value off the stack and back up 4 bytes to what
+ * should be the address of a call or calli.
+ */
+ address = (*sp++) - 4;
+
+ /*
+ * If the address is not within the text segment, skip this
+ * value.
+ */
+ if (!between(address, stext, etext) &&
+ !between(address, ocm_stext, ocm_etext)) {
+#ifdef TRAP_DEBUG_STACK_TRACE
+ printk(KERN_EMERG "not a text address - "
+ "address: %08x, stext: %08x, etext: %08x\n"
+ "ocm_stext: %08x, ocm_etext: %08x\n",
+ (unsigned int)address,
+ (unsigned int)stext,
+ (unsigned int)etext,
+ (unsigned int)ocm_stext,
+ (unsigned int)ocm_etext);
+#endif
+ continue;
+
+ }
+
+ /*
+ * If the address is not on an aligned boundary it can not be a
+ * return address.
+ */
+ if (address & 0x3) {
+ continue;
+ }
+
+ /*
+ * Read the probable instruction.
+ */
+ instruction = *(unsigned int *)address;
+
+ /*
+ * Is this a call instruction?
+ */
+ if ((instruction & 0xF8000000) == (u32_t)(0x1B << 27)) {
+#ifdef TRAP_DEBUG_STACK_TRACE
+ printk(KERN_EMERG "call inst. result: %x, "
+ "test: %x\n", (unsigned int)address,
+ (unsigned int)instruction);
+#endif
+ *trace = sp;
+ result = address;
+ break;
+ }
+
+ /*
+ * Is this a calli instruction?
+ */
+ if ((instruction & 0xF8000000) == (u32_t)(0x1E << 27)) {
+#ifdef TRAP_DEBUG_STACK_TRACE
+ printk(KERN_EMERG "calli inst. result: %x, "
+ "test: %x\n", (unsigned int)address,
+ (unsigned int)instruction);
+#endif
+ *trace = sp;
+ result = address;
+ break;
+ }
+ }
+
+ /*
+ * Restore the current thread to be monitored for traps.
+ */
+ if (thread_trap_en) {
+ asm volatile(
+ " thread_get_self_mask d15 \n\t"
+ " or.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t"
+ :
+ :
+ : "d15", "cc"
+ );
+ }
+ return result;
+}
+
+#ifdef CONFIG_STACKTRACE
+/*
+ * stacktrace_save_entries()
+ * Save stack back trace information into the provided trace structure.
+ */
+void stacktrace_save_entries(struct task_struct *tsk,
+ struct stack_trace *trace,
+ unsigned long sp)
+{
+ unsigned long code_start = (unsigned long)&_stext;
+ unsigned long code_end = (unsigned long)&_etext;
+ unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
+ unsigned long ocm_code_end = (unsigned long)&__data_begin;
+ unsigned long stack_end = (unsigned long)(tsk->stack + THREAD_SIZE - 8);
+ unsigned long stack = (unsigned long)sp;
+ unsigned int idx = 0;
+ unsigned long *handle;
+ int skip = trace->skip;
+
+ handle = (unsigned long *)stack;
+ while (idx < trace->max_entries) {
+ if (skip) {
+ skip--;
+ continue;
+ }
+ trace->entries[idx] = stacktrace_iterate(&handle,
+ code_start, code_end,
+ ocm_code_start, ocm_code_end,
+ (unsigned long)stack, stack_end);
+ if (trace->entries[idx] == 0) {
+ break;
+ }
+ idx++;
+ }
+}
+
+/*
+ * save_stack_trace()
+ * Save the specified amount of the kernel stack trace information
+ * for the current task.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+ unsigned long sp = 0;
+ asm volatile (
+ " move.4 %0, SP \n\t"
+ : "=r" (sp)
+ );
+ stacktrace_save_entries(current, trace, sp);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+/*
+ * save_stack_trace_tsk()
+ * Save the specified amount of the kernel stack trace information
+ * for the specified task.
+ *
+ * Note: We assume the specified task is not currently running.
+ */
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+ stacktrace_save_entries(tsk, trace, tsk->thread.sp);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+#endif /* CONFIG_STACKTRACE */
--- /dev/null
+++ b/arch/ubicom32/kernel/syscalltable.S
@@ -0,0 +1,377 @@
+/*
+ * arch/ubicom32/kernel/syscalltable.S
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ *
+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+.text
+ALIGN
+ .global sys_call_table
+sys_call_table:
+ .long sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long execve_intercept
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_chown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_ni_syscall /* _sys_swapon */
+ .long sys_reboot
+ .long sys_old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm for i386 */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall
+ .long sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* obsolete idle() syscall */
+ .long sys_ni_syscall /* vm86old for i386 */
+ .long sys_wait4
+ .long sys_ni_syscall /* 115 */ /* _sys_swapoff */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long clone_intercept /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_cacheflush /* modify_ldt for i386 */
+ .long sys_adjtimex
+ .long sys_ni_syscall /* 125 */ /* _sys_mprotect */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "creat_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_ni_syscall /* _sys_msync */
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_ni_syscall /* 150 */ /* _sys_mlock */
+ .long sys_ni_syscall /* _sys_munlock */
+ .long sys_ni_syscall /* _sys_mlockall */
+ .long sys_ni_syscall /* _sys_munlockall */
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_ni_syscall /* _sys_mremap */
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_getpagesize /* _sys_getpagesize */
+ .long sys_ni_syscall /* old "query_module" */
+ .long sys_poll
+ .long sys_ni_syscall /* _sys_nfsservctl */
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_lchown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long vfork_intercept /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_chown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_lchown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_getdents64 /* 220 */
+ .long sys_gettid
+ .long sys_tkill
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr /* 225 */
+ .long sys_getxattr
+ .long sys_lgetxattr
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr /* 230 */
+ .long sys_flistxattr
+ .long sys_removexattr
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_futex /* 235 */
+ .long sys_sendfile64
+ .long sys_ni_syscall /* _sys_mincore */
+ .long sys_ni_syscall /* _sys_madvise */
+ .long sys_fcntl64
+ .long sys_readahead /* 240 */
+ .long sys_io_setup
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel /* 245 */
+ .long sys_fadvise64
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 250 */
+ .long sys_epoll_wait
+ .long sys_ni_syscall /* _sys_remap_file_pages */
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 255 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 260 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 265 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_mbind
+ .long sys_get_mempolicy
+ .long sys_set_mempolicy /* 270 */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive
+ .long sys_mq_notify /* 275 */
+ .long sys_mq_getsetattr
+ .long sys_waitid
+ .long sys_ni_syscall /* for _sys_vserver */
+ .long sys_add_key
+ .long sys_request_key /* 280 */
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch /* 285 */
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat /* 290 */
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat /* 295 */
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat /* 300 */
+ .long sys_ni_syscall /* Reserved for pselect6 */
+ .long sys_ni_syscall /* Reserved for ppoll */
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list /* 305 */
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages /* 310 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_kexec_load
+ .long sys_getcpu
+ .long sys_epoll_pwait /* 315 */
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate /* 320 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+ .long sys_ni_syscall /* sys_signalfd4 */
+ .long sys_ni_syscall /* sys_eventfd2 */
+ .long sys_ni_syscall /* sys_epoll_create1 */
+ /* 325 */
+ .long sys_ni_syscall /* sys_dup3 */
+ .long sys_ni_syscall /* sys_pipe2 */
+ .long sys_ni_syscall /* sys_inotify_init1 */
+ .rept NR_syscalls-(.-sys_call_table)/4
+ .long sys_ni_syscall
+ .endr
+
--- /dev/null
+++ b/arch/ubicom32/kernel/sys_ubicom32.c
@@ -0,0 +1,237 @@
+/*
+ * arch/ubicom32/kernel/sys_ubicom32.c
+ * Ubicom32 architecture system call support implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/ubicom32
+ * platform.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/ipc.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+
+#include <asm/setup.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+
+/* common code for old and new mmaps */
+static inline long do_mmap2(
+ unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file *file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(&current->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(&current->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+/*
+ * Perform the select(nd, in, out, ex, tv) and mmap() system
+ * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
+ * handle more than 4 system call parameters, so these system calls
+ * used a memory block for parameter passing..
+ */
+
+struct mmap_arg_struct {
+ unsigned long addr;
+ unsigned long len;
+ unsigned long prot;
+ unsigned long flags;
+ unsigned long fd;
+ unsigned long offset;
+};
+
+asmlinkage int old_mmap(struct mmap_arg_struct *arg)
+{
+ struct mmap_arg_struct a;
+ int error = -EFAULT;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ goto out;
+
+ error = -EINVAL;
+ if (a.offset & ~PAGE_MASK)
+ goto out;
+
+ a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd,
+ a.offset >> PAGE_SHIFT);
+out:
+ return error;
+}
+
+struct sel_arg_struct {
+ unsigned long n;
+ fd_set *inp, *outp, *exp;
+ struct timeval *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ /* sys_select() does the appropriate kernel locking */
+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int sys_ipc(uint call, int first, int second,
+ int third, void *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ if (call <= SEMCTL)
+ switch (call) {
+ case SEMOP:
+ return sys_semop(first, (struct sembuf *)ptr, second);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void **) ptr))
+ return -EFAULT;
+ return sys_semctl(first, second, third, fourth);
+ }
+ default:
+ return -EINVAL;
+ }
+ if (call <= MSGCTL)
+ switch (call) {
+ case MSGSND:
+ return sys_msgsnd(first, (struct msgbuf *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge *)ptr,
+ sizeof(tmp)))
+ return -EFAULT;
+ return sys_msgrcv(first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv(first,
+ (struct msgbuf *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl(first, second,
+ (struct msqid_ds *) ptr);
+ default:
+ return -EINVAL;
+ }
+ if (call <= SHMCTL)
+ switch (call) {
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat(first, ptr, second, &raddr);
+ if (ret)
+ return ret;
+ return put_user(raddr, (ulong __user *) third);
+ }
+ }
+ case SHMDT:
+ return sys_shmdt(ptr);
+ case SHMGET:
+ return sys_shmget(first, second, third);
+ case SHMCTL:
+ return sys_shmctl(first, second, ptr);
+ default:
+ return -ENOSYS;
+ }
+
+ return -EINVAL;
+}
+
+/* sys_cacheflush -- flush (part of) the processor cache. */
+asmlinkage int
+sys_cacheflush(unsigned long addr, int scope, int cache, unsigned long len)
+{
+ flush_cache_all();
+ return 0;
+}
+
+asmlinkage int sys_getpagesize(void)
+{
+ return PAGE_SIZE;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/thread.c
@@ -0,0 +1,228 @@
+/*
+ * arch/ubicom32/kernel/thread.c
+ * Ubicom32 architecture hardware thread support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <asm/ip5000.h>
+#include <asm/machdep.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread.h>
+
+/*
+ * TODO: At some point change the name here to be thread_ksp
+ */
+unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX];
+
+static unsigned int thread_mask = -1;
+static unsigned int thread_mainline_mask;
+
+/*
+ * thread_entry()
+ * Returning from the called function will disable the thread.
+ *
+ * This could be a naked call to allow for hwthreads that do not have stacks.
+ * However, with -O0, the code still writes to thex stack, and this was
+ * corrupting memory just after the callers stack.
+ */
+static void thread_entry(void *arg, thread_exec_fn_t exec)
+{
+ /*
+ * Call thread function
+ */
+ exec(arg);
+
+ /*
+ * Complete => Disable self
+ */
+ thread_disable(thread_get_self());
+}
+
+/*
+ * thread_start()
+ * Start the specified function on the specified hardware thread.
+ */
+thread_t thread_start(thread_t thread,
+ thread_exec_fn_t exec,
+ void *arg,
+ unsigned int *sp_high,
+ thread_type_t type)
+{
+ /*
+ * Sanity check
+ */
+ unsigned int enabled, mask, csr;
+ asm volatile (
+ "move.4 %0, MT_EN\n\t"
+ : "=m" (enabled)
+ );
+
+ mask = 1 << thread;
+ if (enabled & mask) {
+ printk(KERN_WARNING "request to enable a previously enabled thread\n");
+ return (thread_t)-1;
+ }
+
+ /*
+ * Update thread state
+ */
+ csr = (thread << 15) | (1 << 14);
+ asm volatile (
+ "setcsr %0 \n\t"
+ "setcsr_flush 0 \n\t"
+
+ "move.4 A0, #0 \n\t"
+ "move.4 A1, #0 \n\t"
+ "move.4 A2, #0 \n\t"
+ "move.4 A3, #0 \n\t"
+ "move.4 A4, #0 \n\t"
+ "move.4 A5, #0 \n\t"
+ "move.4 A6, #0 \n\t"
+ "move.4 SP, %4 \n\t" /* A7 is SP */
+
+ "move.4 D0, %3 \n\t"
+ "move.4 D1, %2 \n\t"
+ "move.4 D2, #0 \n\t"
+ "move.4 D3, #0 \n\t"
+ "move.4 D4, #0 \n\t"
+ "move.4 D5, #0 \n\t"
+ "move.4 D6, #0 \n\t"
+ "move.4 D7, #0 \n\t"
+ "move.4 D8, #0 \n\t"
+ "move.4 D9, #0 \n\t"
+ "move.4 D10, #0 \n\t"
+ "move.4 D11, #0 \n\t"
+ "move.4 D12, #0 \n\t"
+ "move.4 D13, #0 \n\t"
+ "move.4 D14, #0 \n\t"
+ "move.4 D15, #0 \n\t"
+
+ "move.4 INT_MASK0, #0 \n\t"
+ "move.4 INT_MASK1, #0 \n\t"
+ "move.4 PC, %1 \n\t"
+ "setcsr #0 \n\t"
+ "setcsr_flush 0 \n\t"
+ :
+ : "r" (csr), "r" (thread_entry), "r" (exec),
+ "r" (arg), "r" (sp_high)
+ );
+
+ /*
+ * Apply HRT state
+ */
+ if (type & THREAD_TYPE_HRT) {
+ asm volatile (
+ "or.4 MT_HRT, MT_HRT, %0\n\t"
+ :
+ : "d" (mask)
+ : "cc"
+ );
+ } else {
+ asm volatile (
+ "and.4 MT_HRT, MT_HRT, %0\n\t"
+ :
+ : "d" (~mask)
+ : "cc"
+ );
+ }
+
+ /*
+ * Set priority
+ */
+ asm volatile (
+ "or.4 MT_HPRI, MT_HPRI, %0\n\t"
+ :
+ : "d" (mask)
+ : "cc"
+ );
+
+ /*
+ * Enable thread
+ */
+ asm volatile (
+ "move.4 MT_ACTIVE_SET, %0 \n\t"
+ :
+ : "d" (mask)
+ );
+ thread_enable_mask(mask);
+ return thread;
+}
+
+/*
+ * thread_get_mainline()
+ * Return a mask of those threads that are Linux mainline threads.
+ */
+unsigned int thread_get_mainline(void)
+{
+ return thread_mainline_mask;
+}
+
+/*
+ * thread_set_mainline()
+ * Indicate that the specified thread is a Linux mainline thread.
+ */
+void thread_set_mainline(thread_t tid)
+{
+ thread_mainline_mask |= (1 << tid);
+}
+
+/*
+ * thread_alloc()
+ * Allocate an unused hardware thread.
+ */
+thread_t thread_alloc(void)
+{
+ thread_t tid;
+
+ /*
+ * If this is the first time we are here get the list of unused
+ * threads from the processor device tree node.
+ */
+ if (thread_mask == -1) {
+ thread_mask = processor_threads();
+ }
+
+ if (!thread_mask) {
+ return (thread_t)-1;
+ }
+
+ tid = ffs(thread_mask);
+ if (tid != 0) {
+ tid--;
+ thread_mask &= ~(1 << tid);
+ return tid;
+ }
+
+ return (thread_t)-1;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/time.c
@@ -0,0 +1,212 @@
+/*
+ * arch/ubicom32/kernel/time.c
+ * Initialize the timer list and start the appropriate timers.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/profile.h>
+#include <linux/smp.h>
+#include <asm/ip5000.h>
+#include <asm/machdep.h>
+
+/*
+ * A bitmap of the timers on the processor indicates
+ * that the timer is free or in-use.
+ */
+static unsigned int timers;
+
+/*
+ * timer_set()
+ * Init the specified compare register to go off <n> cycles from now.
+ */
+void timer_set(int timervector, unsigned int cycles)
+{
+ int idx = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
+ UBICOM32_IO_TIMER->syscom[idx] =
+ UBICOM32_IO_TIMER->sysval + cycles;
+ ldsr_enable_vector(timervector);
+}
+
+/*
+ * timer_reset()
+ * Set/reset the timer to go off again.
+ *
+ * Because sysval is a continuous timer, this function is able
+ * to ensure that we do not have clock sku by using the previous
+ * value in syscom to set the next value for syscom.
+ *
+ * Returns the number of ticks that transpired since the last event.
+ */
+int timer_reset(int timervector, unsigned int cycles)
+{
+ /*
+ * Reset the timer in the LDSR thread to go off appropriately.
+ *
+ * Use the previous value of the timer to calculate the new stop
+ * time. This allows us to account for it taking an
+ * indeterminate amount of time to get here.
+ */
+ const int timer_index = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector);
+ unsigned int prev = UBICOM32_IO_TIMER->syscom[timer_index];
+ unsigned int next = prev + cycles;
+ int scratchpad3;
+ int diff;
+ int ticks = 1;
+
+ /*
+ * If the difference is negative, we have missed at least one
+ * timer tick.
+ *
+ * TODO: Decide if we want to "ignore" time (as done below) or
+ * if we want to process time (unevenly) by calling timer_tick()
+ * lost_ticks times.
+ */
+ while (1) {
+ /*
+ * Set our future time first.
+ */
+ UBICOM32_IO_TIMER->syscom[timer_index] = next;
+
+ /*
+ * Then check if we are really set time in the futrue.
+ */
+ diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
+ if (diff >= 0) {
+ break;
+ }
+
+ /*
+ * Oops, we are too slow. Playing catch up.
+ *
+ * If the debugger is connected the there is a good
+ * chance that we lost time because we were in a
+ * break-point, so in this case we do not print out
+ * diagnostics.
+ */
+ asm volatile ("move.4 %0, scratchpad3"
+ : "=r" (scratchpad3));
+ if ((scratchpad3 & 0x1) == 0) {
+ /*
+ * No debugger attached, print to the console
+ */
+ printk(KERN_EMERG "diff: %d, timer has lost %u "
+ "ticks [rounded up]\n",
+ -diff,
+ (unsigned int)((-diff + cycles - 1) / cycles));
+ }
+
+ do {
+ next += cycles;
+ diff = (int)next - (int)UBICOM32_IO_TIMER->sysval;
+ ticks++;
+ } while (diff < 0);
+ }
+ return ticks;
+}
+
+/*
+ * sched_clock()
+ * Returns current time in nano-second units.
+ *
+ * Notes:
+ * 1) This is an override for the weak alias in
+ * kernel/sched_clock.c.
+ * 2) Do not use xtime_lock as this function is
+ * sometimes called with xtime_lock held.
+ * 3) We use a retry algorithm to ensure that
+ * we get a consistent value.
+ * 4) sched_clock must be overwritten if IRQ tracing
+ * is enabled because the default implementation uses
+ * the xtime_lock sequence while holding xtime_lock.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long long my_jiffies;
+ unsigned long jiffies_top;
+ unsigned long jiffies_bottom;
+
+ do {
+ jiffies_top = jiffies_64 >> 32;
+ jiffies_bottom = jiffies_64 & 0xffffffff;
+ } while (unlikely(jiffies_top != (unsigned long)(jiffies_64 >> 32)));
+
+ my_jiffies = ((unsigned long long)jiffies_top << 32) | (jiffies_bottom);
+ return (my_jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+}
+
+/*
+ * timer_free()
+ * Free a hardware timer.
+ */
+void timer_free(int interrupt)
+{
+ unsigned int bit = interrupt - TIMER_INT(0);
+
+ /*
+ * The timer had not been allocated.
+ */
+ BUG_ON(timers & (1 << bit));
+ timers |= (1 << bit);
+}
+
+/*
+ * timer_alloc()
+ * Allocate a hardware timer.
+ */
+int timer_alloc(void)
+{
+ unsigned int bit = find_first_bit((unsigned long *)&timers, 32);
+ if (!bit) {
+ printk(KERN_WARNING "no more free timers\n");
+ return -1;
+ }
+
+ timers &= ~(1 << bit);
+ return bit + TIMER_INT(0);
+}
+
+/*
+ * time_init()
+ * Time init function.
+ */
+void time_init(void)
+{
+ /*
+ * Find the processor node and determine what timers are
+ * available for us.
+ */
+ timers = processor_timers();
+ if (timers == 0) {
+ printk(KERN_WARNING "no timers are available for Linux\n");
+ return;
+ }
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+ timer_device_init();
+#else
+ timer_tick_init();
+#endif
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/timer_broadcast.c
@@ -0,0 +1,102 @@
+/*
+ * arch/ubicom32/kernel/timer_broadcast.c
+ * Implements a dummy clock event for each cpu.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ * arch/arm
+ * arch/sh
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
+
+/*
+ * The broadcast trick only works when the timer will be used in a periodic mode.
+ * If the user has configured either NO_HZ or HIGH_RES_TIMERS they must have
+ * a per cpu timer.
+ */
+#if defined(CONFIG_NO_HZ) || defined(CONFIG_HIGH_RES_TIMERS)
+#error "Tickless and High Resolution Timers require per-CPU local timers: CONFIG_LOCAL_TIMERS"
+#endif
+
+/*
+ * local_timer_interrupt()
+ * Used on SMP for local timer interrupt sent via an IPI.
+ */
+void local_timer_interrupt(void)
+{
+ struct clock_event_device *dev = &__get_cpu_var(local_clockevent);
+
+ dev->event_handler(dev);
+}
+
+/*
+ * dummy_timer_set_next_event()
+ * Cause the timer to go off "cycles" from now.
+ */
+static int dummy_timer_set_next_event(unsigned long cycles, struct clock_event_device *dev)
+{
+ return 0;
+}
+
+/*
+ * dummy_timer_set_mode()
+ * Do Nothing.
+ */
+static void dummy_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+}
+
+/*
+ * local_timer_setup()
+ * Adds a clock event for the specified cpu.
+ */
+int __cpuinit local_timer_setup(unsigned int cpu)
+{
+ struct clock_event_device *dev = &per_cpu(local_clockevent, cpu);
+
+ dev->name = "timer-dummy";
+ dev->features = CLOCK_EVT_FEAT_DUMMY;
+ dev->rating = 200;
+ dev->mult = 1;
+ dev->set_mode = dummy_timer_set_mode;
+ dev->set_next_event = dummy_timer_set_next_event;
+ dev->broadcast = smp_timer_broadcast;
+ dev->cpumask = cpumask_of_cpu(cpu);
+ dev->irq = -1;
+ printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
+
+ clockevents_register_device(dev);
+ return 0;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/timer_device.c
@@ -0,0 +1,302 @@
+/*
+ * arch/ubicom32/kernel/timer_device.c
+ * Implements a Ubicom32 clock device and event devices.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/types.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/spinlock.h>
+#include <asm/ip5000.h>
+#include <asm/machdep.h>
+
+#if defined(CONFIG_SMP)
+#include <asm/smp.h>
+#endif
+
+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+#define MAX_TIMERS (2 + CONFIG_TIMER_EXTRA_ALLOC)
+#else
+#define MAX_TIMERS (NR_CPUS + CONFIG_TIMER_EXTRA_ALLOC)
+#endif
+
+#if (MAX_TIMERS > 10)
+#error "Ubicom32 only has 10 timers"
+#endif
+
+static unsigned int frequency;
+static struct clock_event_device timer_device_devs[MAX_TIMERS];
+static struct irqaction timer_device_irqs[MAX_TIMERS];
+static int timer_device_next_timer = 0;
+
+DEFINE_SPINLOCK(timer_device_lock);
+
+/*
+ * timer_device_set_next_event()
+ * Cause the timer to go off "cycles" from now.
+ */
+static int timer_device_set_next_event(unsigned long cycles, struct clock_event_device *dev)
+{
+ timer_set(dev->irq, cycles);
+ return 0;
+}
+
+/*
+ * timer_device_set_mode()
+ * Handle the mode switch for a clock event device.
+ */
+static void timer_device_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /*
+ * Make sure the vector is disabled
+ * until the next event is set.
+ */
+ printk(KERN_NOTICE "timer[%d]: shutdown\n", dev->irq);
+ ldsr_disable_vector(dev->irq);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Make sure the vector is disabled
+ * until the next event is set.
+ */
+ printk(KERN_NOTICE "timer[%d]: oneshot\n", dev->irq);
+ ldsr_disable_vector(dev->irq);
+ break;
+
+ case CLOCK_EVT_MODE_PERIODIC:
+ /*
+ * The periodic request is 1 per jiffies
+ */
+ printk(KERN_NOTICE "timer[%d]: periodic: %d cycles\n",
+ dev->irq, frequency / CONFIG_HZ);
+ timer_set(dev->irq, frequency / CONFIG_HZ);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ printk(KERN_WARNING "timer[%d]: unimplemented mode: %d\n",
+ dev->irq, mode);
+ break;
+ };
+}
+
+/*
+ * timer_device_event()
+ * Call the device's event handler.
+ *
+ * The pointer is initialized by the generic Linux code
+ * to the function to be called.
+ */
+static irqreturn_t timer_device_event(int irq, void *dev_id)
+{
+ struct clock_event_device *dev = (struct clock_event_device *)dev_id;
+
+ if (dev->mode == CLOCK_EVT_MODE_PERIODIC) {
+ /*
+ * The periodic request is 1 per jiffies
+ */
+ timer_reset(dev->irq, frequency / CONFIG_HZ);
+ } else {
+ /*
+ * The timer will go off again at the rollover
+ * point. We must disable the IRQ to prevent
+ * getting a spurious interrupt.
+ */
+ ldsr_disable_vector(dev->irq);
+ }
+
+ if (!dev->event_handler) {
+ printk(KERN_CRIT "no registered event handler\n");
+ return IRQ_HANDLED;
+ }
+
+ dev->event_handler(dev);
+ return IRQ_HANDLED;
+}
+
+/*
+ * timer_device_clockbase_read()
+ * Provide a primary clocksource around the sysval timer.
+ */
+static cycle_t timer_device_clockbase_read(void)
+{
+ return (cycle_t)UBICOM32_IO_TIMER->sysval;
+}
+
+/*
+ * Primary Clock Source Description
+ *
+ * We use 24 for the shift factor because we want
+ * to ensure there are less than 2^24 clocks
+ * in a jiffie of 10 ms.
+ */
+static struct clocksource timer_device_clockbase = {
+ .name = "sysval",
+ .rating = 400,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .mult = 0,
+ .read = timer_device_clockbase_read,
+};
+
+/*
+ * timer_device_alloc_event()
+ * Allocate a timer device event.
+ */
+static int timer_device_alloc_event(const char *name, int cpuid, cpumask_t mask)
+{
+ struct clock_event_device *dev;
+ struct irqaction *action;
+
+ /*
+ * Are we out of configured timers?
+ */
+ spin_lock(&timer_device_lock);
+ if (timer_device_next_timer >= MAX_TIMERS) {
+ spin_unlock(&timer_device_lock);
+ printk(KERN_WARNING "out of timer event entries\n");
+ return -1;
+ }
+ dev = &timer_device_devs[timer_device_next_timer];
+ action = &timer_device_irqs[timer_device_next_timer];
+ timer_device_next_timer++;
+ spin_unlock(&timer_device_lock);
+
+ /*
+ * Now allocate a timer to ourselves.
+ */
+ dev->irq = timer_alloc();
+ if (dev->irq == -1) {
+ spin_lock(&timer_device_lock);
+ timer_device_next_timer--;
+ spin_unlock(&timer_device_lock);
+ printk(KERN_WARNING "out of hardware timers\n");
+ return -1;
+ }
+
+ /*
+ * Init the IRQ action structure. Make sure
+ * this in place before you register the clock
+ * event device.
+ */
+ action->name = name;
+ action->flags = IRQF_DISABLED | IRQF_TIMER;
+ action->handler = timer_device_event;
+ action->mask = mask;
+ action->dev_id = dev;
+ setup_irq(dev->irq, action);
+ irq_set_affinity(dev->irq, mask);
+ ldsr_disable_vector(dev->irq);
+
+ /*
+ * init clock dev structure.
+ *
+ * The min_delta_ns is chosen to ensure that setting next
+ * event will never be requested with too small of value.
+ */
+ dev->name = name;
+ dev->rating = timer_device_clockbase.rating;
+ dev->shift = timer_device_clockbase.shift;
+ dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ dev->set_mode = timer_device_set_mode;
+ dev->set_next_event = timer_device_set_next_event;
+ dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift);
+ dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev);
+ dev->min_delta_ns = clockevent_delta2ns(100, dev);
+ dev->cpumask = mask;
+ printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
+
+ /*
+ * Now register the device.
+ */
+ clockevents_register_device(dev);
+ return dev->irq;
+}
+
+#if defined(CONFIG_LOCAL_TIMERS)
+/*
+ * local_timer_setup()
+ * Allocation function for creating a per cpu local timer.
+ */
+int __cpuinit local_timer_setup(unsigned int cpu)
+{
+ return timer_device_alloc_event("timer-cpu", cpu, cpumask_of_cpu(cpu));
+}
+#endif
+
+/*
+ * timer_device_init()
+ * Create and init a generic clock driver for Ubicom32.
+ */
+void timer_device_init(void)
+{
+ int i;
+
+ /*
+ * Get the frequency from the processor device tree node or use
+ * the default if not available. We will store this as the frequency
+ * of the timer to avoid future calculations.
+ */
+ frequency = processor_frequency();
+ if (frequency == 0) {
+ frequency = CLOCK_TICK_RATE;
+ }
+
+ /*
+ * Setup the primary clock source around sysval. Linux does not
+ * supply a Mhz multiplier so convert down to khz.
+ */
+ timer_device_clockbase.mult =
+ clocksource_khz2mult(frequency / 1000,
+ timer_device_clockbase.shift);
+ if (clocksource_register(&timer_device_clockbase)) {
+ printk(KERN_ERR "timer: clocksource failed to register\n");
+ return;
+ }
+
+ /*
+ * Always allocate a primary timer.
+ */
+ timer_device_alloc_event("timer-primary", -1, CPU_MASK_ALL);
+
+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+ /*
+ * If BROADCAST is selected we need to add a broadcast timer.
+ */
+ timer_device_alloc_event("timer-broadcast", -1, CPU_MASK_ALL);
+#endif
+
+ /*
+ * Allocate extra timers that are requested.
+ */
+ for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) {
+ timer_device_alloc_event("timer-extra", -1, CPU_MASK_ALL);
+ }
+}
+
--- /dev/null
+++ b/arch/ubicom32/kernel/timer_tick.c
@@ -0,0 +1,109 @@
+/*
+ * arch/ubicom32/kernel/timer_tick.c
+ * Impelemets a perodic timer.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/profile.h>
+
+#include <asm/ip5000.h>
+#include <asm/machdep.h>
+#if defined(CONFIG_SMP)
+#include <asm/smp.h>
+#endif
+
+static unsigned int timervector;
+static unsigned int frequency;
+
+/*
+ * timer_tick()
+ * Kernel system timer support. Needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick.
+ */
+static irqreturn_t timer_tick(int irq, void *dummy)
+{
+ int ticks;
+
+ BUG_ON(!irqs_disabled());
+ ticks = timer_reset(timervector, frequency);
+
+ write_seqlock(&xtime_lock);
+ do_timer(ticks);
+ write_sequnlock(&xtime_lock);
+
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
+
+#if defined(CONFIG_SMP)
+ smp_send_timer_all();
+#endif
+ return(IRQ_HANDLED);
+}
+
+/*
+ * Data used by setup_irq for the timer.
+ */
+static struct irqaction timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = timer_tick,
+};
+
+/*
+ * timer_tick_init()
+ * Implements a periodic timer
+ *
+ * This implementation directly calls the timer_tick() and move
+ * the Linux kernel forward. This is used when the user has not
+ * selected GENERIC_CLOCKEVENTS.
+ */
+void timer_tick_init(void)
+{
+ /*
+ * Now allocate a timer to ourselves.
+ */
+ timervector = timer_alloc();
+ if (timervector == -1) {
+ printk(KERN_WARNING "where did the timer go?\n");
+ return;
+ }
+
+ setup_irq(timervector, &timer_irq);
+
+ /*
+ * Get the frequency from the processor device tree node or use
+ * the default if not available. We will store this as the frequency
+ * of the timer to avoid future calculations.
+ */
+ frequency = processor_frequency();
+ if (frequency == 0) {
+ frequency = CLOCK_TICK_RATE;
+ }
+ frequency /= CONFIG_HZ;
+
+ printk(KERN_NOTICE "timer will interrupt every: %d cycles\n", frequency);
+ timer_set(timervector, frequency);
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/topology.c
@@ -0,0 +1,47 @@
+/*
+ * arch/ubicom32/kernel/topology.c
+ * Ubicom32 architecture sysfs topology information.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/cache.h>
+
+static struct cpu cpu_devices[NR_CPUS] __read_mostly;
+
+static int __init topology_init(void)
+{
+ int num;
+
+ for_each_present_cpu(num) {
+ cpu_devices[num].hotpluggable = 0;
+ register_cpu(&cpu_devices[num], num);
+ }
+ return 0;
+}
+
+subsys_initcall(topology_init);
--- /dev/null
+++ b/arch/ubicom32/kernel/traps.c
@@ -0,0 +1,510 @@
+/*
+ * arch/ubicom32/kernel/traps.c
+ * Ubicom32 architecture trap handling support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/*
+ * Sets up all exception vectors
+ */
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/a.out.h>
+#include <linux/user.h>
+#include <linux/string.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/kallsyms.h>
+#include <linux/compiler.h>
+#include <linux/stacktrace.h>
+#include <linux/personality.h>
+
+#include <asm/uaccess.h>
+#include <asm/stacktrace.h>
+#include <asm/devtree.h>
+#include <asm/setup.h>
+#include <asm/fpu.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/siginfo.h>
+#include <asm/ip5000.h>
+#include <asm/thread.h>
+
+#define TRAP_MAX_STACK_DEPTH 20
+
+/*
+ * These symbols are filled in by the linker.
+ */
+extern unsigned long _stext;
+extern unsigned long _etext;
+
+extern unsigned long __ocm_text_run_begin;
+extern unsigned long __data_begin;
+
+const char *trap_cause_strings[] = {
+ /*0*/ "inst address decode error",
+ /*1*/ "inst sync error",
+ /*2*/ "inst illegal",
+ /*3*/ "src1 address decode error",
+ /*4*/ "dst address decode error",
+ /*5*/ "src1 alignment error",
+ /*6*/ "dst alignment error",
+ /*7*/ "src1 sync error",
+ /*8*/ "dst sync error",
+ /*9*/ "DCAPT error",
+ /*10*/ "inst range error",
+ /*11*/ "src1 range error",
+ /*12*/ "dst range error",
+};
+
+/*
+ * The device tree trap node definition.
+ */
+struct trapnode {
+ struct devtree_node dn;
+ unsigned int intthread;
+};
+
+static struct trapnode *tn;;
+
+/*
+ * trap_interrupt_handler()
+ * Software Interrupt to ensure that a trap is serviced.
+ */
+static irqreturn_t trap_interrupt_handler(int irq, void *dummy)
+{
+ /* Do Nothing */
+ return IRQ_HANDLED;
+}
+
+/*
+ * Data used by setup_irq for the timer.
+ */
+static struct irqaction trap_irq = {
+ .name = "trap",
+ .flags = IRQF_DISABLED,
+ .handler = trap_interrupt_handler,
+};
+
+/*
+ * trap_cause_to_str()
+ * Convert a trap_cause into a series of printk
+ */
+static void trap_cause_to_str(long status)
+{
+ int bit;
+
+ if ((status & ((1 << TRAP_CAUSE_TOTAL) - 1)) == 0) {
+ printk(KERN_NOTICE "decode: UNKNOWN CAUSES\n");
+ return;
+ }
+
+ for (bit = 0; bit < TRAP_CAUSE_TOTAL; bit++) {
+ if (status & (1 << bit)) {
+ printk(KERN_NOTICE "\tdecode: %08x %s\n",
+ 1 << bit, trap_cause_strings[bit]);
+ }
+ }
+}
+
+/*
+ * trap_print_information()
+ * Print the cause of the trap and additional info.
+ */
+static void trap_print_information(const char *str, struct pt_regs *regs)
+{
+ printk(KERN_WARNING "\n");
+
+ if (current) {
+ printk(KERN_WARNING "Process %s (pid: %d)\n",
+ current->comm, current->pid);
+ }
+
+ if (current && current->mm) {
+ printk(KERN_NOTICE "text = 0x%p-0x%p data = 0x%p-0x%p\n"
+ KERN_NOTICE "bss = 0x%p-0x%p user-stack = 0x%p\n"
+ KERN_NOTICE "\n",
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
+ }
+
+ printk(KERN_WARNING "%s: Causes: 0x%08x\n", str,
+ (unsigned int)regs->trap_cause);
+ trap_cause_to_str(regs->trap_cause);
+ show_regs(regs);
+ show_stack(NULL, (unsigned long *)regs->an[7]);
+ printk(KERN_NOTICE "--- End Trap --- \n");
+}
+
+/*
+ * dump_stack()
+ * Dump the stack of the current task.
+ */
+void dump_stack(void)
+{
+ show_stack(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * show_stack()
+ * Print out information from the current stack.
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ /*
+ * Allocate just enough entries on the stack.
+ */
+ unsigned int calls[TRAP_MAX_STACK_DEPTH];
+ unsigned long code_start = (unsigned long)CONFIG_RAMBASE;
+ unsigned long code_end = (unsigned long)CONFIG_RAMBASE+CONFIG_RAMSIZE;
+ unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin;
+ unsigned long ocm_code_end = (unsigned long)&__data_begin;
+ unsigned long stack_end = (unsigned long)(current->stack + THREAD_SIZE - 8);
+ unsigned long stack = (unsigned long)sp;
+ int kernel_stack = 1;
+
+ /*
+ * Which task are we talking about.
+ */
+ if (!task) {
+ task = current;
+ }
+
+ /*
+ * Find the stack for the task if one was not specified. Otherwise
+ * use the specified stack.
+ */
+ if (!stack) {
+ if (task != current) {
+ stack = task->thread.sp;
+ stack_end = (unsigned long)task->stack + THREAD_SIZE - 8;
+ } else {
+ asm volatile (
+ "move.4 %0, SP \n\t"
+ : "=r" (stack)
+ );
+ }
+ }
+
+ printk(KERN_NOTICE "Starting backtrace: PID %d '%s'\n",
+ task->pid, task->comm);
+
+ /*
+ * We do 2 passes the first pass is Kernel stack is the second
+ * User stack.
+ */
+ while (kernel_stack) {
+ unsigned long *handle;
+ unsigned int i, idx = 0;
+ struct pt_regs *pt = task_pt_regs(task);
+
+ /*
+ * If the task is in user mode, reset the start
+ * and end values for text.
+ */
+ if (__user_mode(stack)) {
+ if (!(task->personality & FDPIC_FUNCPTRS)) {
+ printk(KERN_NOTICE " User Stack:\n");
+ code_start = task->mm->start_code;
+ code_end = task->mm->end_code;
+ } else {
+ printk(KERN_NOTICE " User Stack (fdpic):\n");
+
+ }
+ stack_end = task->mm->start_stack;
+ ocm_code_end = ocm_code_start = 0;
+ kernel_stack = 0;
+ } else {
+ printk(KERN_NOTICE " Kernel Stack:\n");
+ }
+
+ /*
+ * Collect the stack back trace information.
+ */
+ printk(" code[0x%lx-0x%lx]", code_start, code_end);
+ if (ocm_code_start) {
+ printk(" ocm_code[0x%lx-0x%lx]",
+ ocm_code_start, ocm_code_end);
+ }
+ printk("\n stack[0x%lx-0x%lx]\n", stack, stack_end);
+
+ handle = (unsigned long*)stack;
+ while (idx < TRAP_MAX_STACK_DEPTH) {
+ calls[idx] = stacktrace_iterate(&handle,
+ code_start, code_end,
+ ocm_code_start, ocm_code_end,
+ (unsigned long)stack, stack_end);
+ if (calls[idx] == 0) {
+ break;
+ }
+ idx++;
+ }
+
+ /*
+ * Now print out the data.
+ */
+ printk(KERN_NOTICE " CALL && CALLI on stack:");
+ for (i = 0; i < idx; i++) {
+ printk("%s0x%x, ", (i & 0x3) == 0 ? "\n " : "",
+ calls[i]);
+ }
+ printk(idx == TRAP_MAX_STACK_DEPTH ? "...\n" : "\n");
+
+ /*
+ * If we are doing user stack we are done
+ */
+ if (!kernel_stack) {
+ break;
+ }
+
+ /*
+ * Does this kernel stack have a mm (i.e. is it user)
+ */
+ if (!task->mm) {
+ printk("No mm for userspace stack.\n");
+ break;
+ }
+ /*
+ * Get the user-mode stack (if any)
+ */
+ stack = pt->an[7];
+ printk(KERN_NOTICE "Userspace stack at 0x%lx frame type %d\n",
+ stack, (int)pt->frame_type);
+ if (!__user_mode(stack)) {
+ break;
+ }
+ }
+}
+
+/*
+ * die_if_kernel()
+ * Determine if we are in kernel mode and if so print stuff out and die.
+ */
+void die_if_kernel(char *str, struct pt_regs *regs, long trap_cause)
+{
+ unsigned int s3value;
+
+ if (user_mode(regs)) {
+ return;
+ }
+
+ console_verbose();
+ trap_print_information(str, regs);
+
+ /*
+ * If the debugger is attached via the hardware mailbox protocol,
+ * go into an infinite loop and the debugger will figure things out.
+ */
+ asm volatile (
+ "move.4 %0, scratchpad3"
+ : "=r" (s3value)
+ );
+ if (s3value) {
+ asm volatile("1: jmpt.t 1b");
+ }
+
+ /*
+ * Set the debug taint value.
+ */
+ add_taint(TAINT_DIE);
+ do_exit(SIGSEGV);
+}
+
+/*
+ * trap_handler()
+ * Handle traps.
+ *
+ * Traps are treated as interrupts and registered with the LDSR. When
+ * the LDSR takes the interrupt, it will determine if a trap has occurred
+ * and service the trap prior to servicing the interrupt.
+ *
+ * This function is directly called by the LDSR.
+ */
+void trap_handler(int irq, struct pt_regs *regs)
+{
+ int sig = SIGSEGV;
+ siginfo_t info;
+ unsigned int trap_cause = regs->trap_cause;
+
+ BUG_ON(!irqs_disabled());
+
+ /*
+ * test if in kernel and die.
+ */
+ die_if_kernel("Kernel Trap", regs, trap_cause);
+
+ /*
+ * User process problem, setup a signal for this process
+ */
+ if ((trap_cause & (1 << TRAP_CAUSE_DST_RANGE_ERR)) ||
+ (trap_cause & (1 << TRAP_CAUSE_SRC1_RANGE_ERR)) ||
+ (trap_cause & (1 << TRAP_CAUSE_I_RANGE_ERR))) {
+ sig = SIGSEGV;
+ info.si_code = SEGV_MAPERR;
+ } else if ((trap_cause & (1 << TRAP_CAUSE_DST_MISALIGNED)) ||
+ (trap_cause & (1 << TRAP_CAUSE_SRC1_MISALIGNED))) {
+ sig = SIGBUS;
+ info.si_code = BUS_ADRALN;
+ } else if ((trap_cause & (1 << TRAP_CAUSE_DST_DECODE_ERR)) ||
+ (trap_cause & (1 << TRAP_CAUSE_SRC1_DECODE_ERR))) {
+ sig = SIGILL;
+ info.si_code = ILL_ILLOPN;
+ } else if ((trap_cause & (1 << TRAP_CAUSE_ILLEGAL_INST))) {
+ /*
+ * Check for software break point and if found signal trap
+ * not illegal instruction.
+ */
+ unsigned long instruction;
+ if (between(regs->pc, CONFIG_RAMBASE,
+ CONFIG_RAMBASE + CONFIG_RAMSIZE) &&
+ (regs->pc & 3) == 0 &&
+ get_user(instruction, (unsigned long *)regs->pc) == 0) {
+
+ /*
+ * This used to be 0xaabbccdd but it turns out
+ * that is now valid in ubicom32v4 isa so we
+ * have switched to 0xfabbccdd
+ */
+ if ((instruction == 0xfabbccdd) ||
+ (instruction == 0xaabbccdd)) {
+ sig = SIGTRAP;
+ info.si_code = TRAP_BRKPT;
+ goto send_signal;
+ }
+ }
+ sig = SIGILL;
+ info.si_code = ILL_ILLOPC;
+ } else if ((trap_cause & (1 << TRAP_CAUSE_I_DECODE_ERR))) {
+ sig = SIGILL;
+ info.si_code = ILL_ILLOPC;
+ } else if ((trap_cause & (1 << TRAP_CAUSE_DCAPT))) {
+ sig = SIGTRAP;
+ info.si_code = TRAP_TRACE;
+ }
+
+ /*
+ * Print a trap information block to the console, do not
+ * print this above the case because we don't want it
+ * printed for software break points.
+ */
+ trap_print_information("User Trap", regs);
+
+send_signal:
+
+ force_sig_info(sig, &info, current);
+
+ /*
+ * Interrupts are disabled, re-enable them now.
+ */
+ if (!irqs_disabled()) {
+ printk(KERN_EMERG "interrupts enabled on exit, irq=%d, regs=%p",
+ irq, regs);
+ BUG();
+ }
+}
+
+/*
+ * trap_init_interrupt()
+ * We need a 2nd trap handling init that will occur after init_IRQ().
+ */
+void __init trap_init_interrupt(void)
+{
+ int err;
+ unsigned char tirq;
+ struct devtree_node *dn = (struct devtree_node *)tn;
+
+ /*
+ * Now setup the Software IRQ so that if a trap occurs the LDSR
+ * is started. The irq is there just to "force" the LDSR to run.
+ */
+ if (!tn) {
+ printk(KERN_WARNING "trap_init_interrupt skipped.\n");
+ return;
+ }
+
+ err = devtree_irq(dn, NULL, &tirq);
+ if (err) {
+ printk(KERN_WARNING "error obtaining trap irq value: %d\n",
+ err);
+ return;
+ }
+
+ if (tirq == DEVTREE_IRQ_NONE) {
+ printk(KERN_WARNING "trap irq not available: %d\n", tirq);
+ return;
+ }
+
+ err = setup_irq(tirq, &trap_irq);
+ if (err) {
+ printk(KERN_WARNING "trap irq setup failed: %d\n", err);
+ return;
+ }
+
+ /*
+ * Let ultra know which thread is handling the traps and
+ * what the interrupt to use is.
+ */
+ tn->intthread = ldsr_get_threadid();
+
+ /*
+ * Tell the LDSR about our IRQ so that it will unsuspend
+ * if one occurs while waiting for the per thread lock.
+ */
+ ldsr_set_trap_irq(tirq);
+}
+
+/*
+ * trap_init()
+ * init trap handling
+ *
+ * Trap handling is done through the ldsr. Every time an interrupt
+ * occurs, the LDSR looks for threads that are listed in the TRAP
+ * register and forces a call to the trap handler.
+ */
+void __init trap_init(void)
+{
+ /*
+ * If we do not have a trap node in the device tree, we leave the fault
+ * handling to the underlying hardware.
+ */
+ tn = (struct trapnode *)devtree_find_node("traps");
+ if (!tn) {
+ printk(KERN_WARNING "traps are not handled by linux\n");
+ return;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/uaccess.c
@@ -0,0 +1,109 @@
+/*
+ * arch/ubicom32/include/asm/uaccess.c
+ * User space memory access functions for Ubicom32 architecture.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#include <asm/segment.h>
+#include <asm/uaccess.h>
+
+extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
+
+/*
+ * __access_ok()
+ * Check that the address is in the current processes.
+ *
+ * NOTE: The kernel uses "pretend" user addresses that wind
+ * up calling access_ok() so this approach has only marginal
+ * value because you wind up with lots of false positives.
+ */
+int __access_ok(unsigned long addr, unsigned long size)
+{
+ // struct vm_area_struct *vma;
+
+ /*
+ * Don't do anything if we are not a running system yet.
+ */
+ if (system_state != SYSTEM_RUNNING) {
+ return 1;
+ }
+
+ /*
+ * It appears that Linux will call this function even when we are not
+ * in the context of a user space application that has a VM address
+ * space. So we must check that current and mm are valid before
+ * performing the check.
+ */
+ if ((!current) || (!current->mm)) {
+ return 1;
+ }
+
+ /*
+ * We perform some basic checks on the address to ensure that it
+ * is at least within the range of DRAM.
+ */
+ if ((addr < (int)&_etext) || (addr > memory_end)) {
+ printk(KERN_WARNING "pid=%d[%s]: range [%lx - %lx] not in memory area: [%lx - %lx]\n",
+ current->pid, current->comm,
+ addr, addr + size,
+ memory_start, memory_end);
+ return 0;
+ }
+
+ /*
+ * For nommu Linux we can check this by looking at the allowed
+ * memory map for the process.
+ *
+ * TODO: Since the kernel passes addresses in it's own space as though
+ * they were user address, we can not validate the addresses this way.
+ */
+#if 0
+ if (!down_read_trylock(&current->mm->mmap_sem)) {
+ return 1;
+ }
+ vma = find_vma(current->mm, addr);
+ if (!vma) {
+ up_read(&current->mm->mmap_sem);
+ printk(KERN_WARNING "pid=%d[%s]: possible invalid acesss on range: [%lx - %lx]\n",
+ current->pid, current->comm, addr, addr + size);
+ return 1;
+ }
+ if ((addr + size) > vma->vm_end) {
+ up_read(&current->mm->mmap_sem);
+ printk(KERN_WARNING "pid=%d[%s]: possible invalid length on range: [%lx - %lx]\n",
+ current->pid, current->comm, addr, addr + size);
+ return 1;
+ }
+ up_read(&current->mm->mmap_sem);
+#endif
+ return 1;
+}
+
+EXPORT_SYMBOL(__access_ok);
--- /dev/null
+++ b/arch/ubicom32/kernel/ubicom32_context_switch.S
@@ -0,0 +1,325 @@
+/*
+ * arch/ubicom32/kernel/ubicom32_context_switch.S
+ * Implements context switch and return functions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/ubicom32-common.h>
+#include <asm/ip5000.h>
+#include <asm/range-protect.h>
+
+/*
+ * restore_context()
+ * Restore the full context from sp (struct pt_reg *)
+ *
+ * Note: Recovered PC and CSR are saved on the stack and are to be popped off
+ * before returning.
+ */
+.macro restore_context
+ move.4 a0, sp ; Set up a0 as base address for register recovery
+ move.4 sp, PT_SP(a0) ; Recover Stack pointer from save area
+ move.4 -4(sp)++, PT_PC(a0) ; Recover saved PC and save to stack
+ move.4 -4(sp)++, PT_CSR(a0) ; Recover saved csr and save to stack
+ move.4 d0, PT_D0(a0)
+ move.4 d1, PT_D1(a0)
+ move.4 d2, PT_D2(a0)
+ move.4 d3, PT_D3(a0)
+ move.4 d4, PT_D4(a0)
+ move.4 d5, PT_D5(a0)
+ move.4 d6, PT_D6(a0)
+ move.4 d7, PT_D7(a0)
+ move.4 d8, PT_D8(a0)
+ move.4 d9, PT_D9(a0)
+ move.4 d10, PT_D10(a0)
+ move.4 d11, PT_D11(a0)
+ move.4 d12, PT_D12(a0)
+ move.4 d13, PT_D13(a0)
+ move.4 d14, PT_D14(a0)
+ move.4 d15, PT_D15(a0)
+ move.4 a1, PT_A1(a0)
+ move.4 a2, PT_A2(a0)
+ move.4 a3, PT_A3(a0)
+ move.4 a4, PT_A4(a0)
+ move.4 a5, PT_A5(a0)
+ move.4 a6, PT_A6(a0)
+ move.4 acc0_hi, PT_ACC0HI(a0)
+ move.4 acc0_lo, PT_ACC0LO(a0)
+ move.4 mac_rc16, PT_MAC_RC16(a0)
+ move.4 acc1_hi, PT_ACC1HI(a0)
+ move.4 acc1_lo, PT_ACC1LO(a0)
+ move.4 source3, PT_SOURCE3(a0)
+ move.4 int_mask0, PT_INT_MASK0(a0)
+ move.4 int_mask1, PT_INT_MASK1(a0)
+ move.4 a0, PT_A0(a0)
+.endm
+
+/*
+ * ldsr_thread_enable_interrupts()
+ * An assembly version of the enable interrupts function.
+ *
+ * The stack is fair game but all registers MUST be preserved.
+ *
+ */
+.macro ldsr_thread_enable_interrupts
+ move.4 -4(sp)++, d3 ; Push d3
+ move.4 -4(sp)++, a3 ; Push a3
+
+ /*
+ * Read the ROSR and obtain ~(1 << tid)
+ */
+ lsr.4 d3, rosr, #0x2 ; Move the thread portion of ROSR into d3
+ lsl.4 d3, #1, d3 ; perform a (1 << tid)
+ not.4 d3, d3 ; Negate the value of d3 == ~(1 << threadid)
+
+ /*
+ * Get the value of the ldsr_soft_irq_mask
+ */
+ moveai a3, #%hi(ldsr_soft_irq_mask)
+ move.4 a3, %lo(ldsr_soft_irq_mask)(a3)
+
+ /*
+ * Now re-enable interrupts for this thread and then
+ * wakeup the LDSR.
+ */
+ and.4 scratchpad1, scratchpad1, d3
+ move.4 int_set0, a3
+
+ /*
+ * Restore the registers.
+ */
+ move.4 a3, (sp)4++
+ move.4 d3, (sp)4++
+.endm
+
+/*
+ * ret_from_interrupt_to_kernel()
+ * RFI function that is where do_IRQ() returns to if the thread was in kernel space.
+ */
+ .section .text.ret_from_interrupt_to_kernel
+ .global ret_from_interrupt_to_kernel
+ret_from_interrupt_to_kernel:
+ atomic_lock_acquire ; Enter critical section
+ restore_context ; Restore the thread context
+ atomic_lock_release ; Leave critical section
+ ldsr_thread_enable_interrupts ; enable the threads interrupts
+ move.4 csr, (sp)4++ ; Restore csr from the stack
+ ret (sp)4++
+
+/*
+ * ret_from_interrupt_to_user()
+ * RFI function that is where do_IRQ() returns to if the thread was in user space.
+ *
+ * TODO: Do we really need the ciritical section handling in this code?
+ *
+ */
+ .section .ret_from_interrupt_to_user.text
+ .global ret_from_interrupt_to_user
+ret_from_interrupt_to_user:
+ ldsr_thread_enable_interrupts ; enable the threads interrupts
+ movei d0, #(~(ASM_THREAD_SIZE-1))
+ and.4 a3, sp, d0 ; a3 now has the thread info pointer
+
+ /*
+ * Test if the scheduler needs to be called.
+ */
+ btst TI_FLAGS(a3), #ASM_TIF_NEED_RESCHED
+ jmpeq.t 2f
+ moveai a5, #%hi(schedule)
+ calli a5, %lo(schedule)(a5) ; Call the scheduler. I will come back here.
+
+ /*
+ * See if we have pending signals and call do_signal
+ * if needed.
+ */
+2: atomic_lock_acquire ; Enter critical section
+ move.4 -4(sp)++, a1 ; Save A1 on the stack. We are going to use a1 it.
+ movei d0, #(~(ASM_THREAD_SIZE-1))
+ and.4 a1, sp, d0 ; a1 now has the thread info pointer
+ btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING ; Any signals needed?
+ jmpeq.t 1f
+
+
+ /*
+ * Now call do_signal()
+ */
+ atomic_lock_release ; Leave critical section
+ move.4 d0, #0 ; oldset pointer is NULL
+ lea.1 d1, 4(sp) ; d1 is the regs pointer
+ moveai a5, #%hi(do_signal)
+ calli a5, %lo(do_signal)(a5) ; Call do_signal()
+
+ /*
+ * Back from do_signal(), re-enter critical section.
+ */
+ atomic_lock_acquire ; Enter critical section
+
+1: move.4 a1, (sp)4++ ; pop A1 off the stack
+
+ disable_kernel_ranges_for_current d15 ; disable kernel ranges
+
+ restore_context ; restore the previous context
+ atomic_lock_release ; Leave critical section
+ move.4 csr, (sp)4++ ; Restore csr from the stack
+ ret (sp)4++
+
+/*
+ * restore_all_registers()
+ *
+ * restore_all_registers will be the alternate exit route for
+ * preempted processes that have called a signal handler
+ * and are returning back to user space.
+ */
+ .global restore_all_registers
+restore_all_registers:
+ atomic_lock_acquire ; Enter critical section
+ disable_kernel_ranges_for_current d15 ; disable kernel ranges
+ atomic_lock_release ; Leave critical section
+ restore_context ; restore previous context
+ move.4 csr, (sp)4++ ; Restore csr from the stack
+ ret (sp)4++
+
+/*
+ * ret_from_fork()
+ * Called on the child's return from fork system call.
+ */
+ .section .ret_from_fork.text
+ .global ret_from_fork
+ret_from_fork:
+ ;;; d0 contains the arg for schedule_tail
+ ;;; the others we don't care about as they are in PT_REGS (sp)
+ moveai a5, #%hi(schedule_tail)
+ calli a5, %lo(schedule_tail)(a5)
+
+ atomic_lock_acquire ; Enter critical section
+
+ move.4 a3, sp
+ move.4 d0, PT_D0(a3) ; Restore D0
+ move.4 d1, PT_D1(a3) ; Restore D1
+ move.4 d2, PT_D2(a3) ; Restore D2
+ move.4 d3, PT_D3(a3) ; Restore D3
+ move.4 d10, PT_D10(a3) ; Restore D10
+ move.4 d11, PT_D11(a3) ; Restore D11
+ move.4 d12, PT_D12(a3) ; Restore D12
+ move.4 d13, PT_D13(a3) ; Restore D13
+ move.4 a1, PT_A1(a3) ; Restore A1
+ move.4 a2, PT_A2(a3) ; Restore A2
+ move.4 a5, PT_A5(a3) ; Restore A5
+ move.4 a6, PT_A6(a3) ; Restore A6
+ move.4 sp, PT_SP(a3) ; Restore sp
+ move.4 a4, PT_PC(a3) ; Restore pc in register a4
+ move.4 PT_FRAME_TYPE(a3), #0 ; Clear frame_type to indicate it is invalid.
+
+ disable_kernel_ranges_for_current d15
+ atomic_lock_release ; Leave critical section
+ calli a4, 0(a4) ; Return.
+
+/*
+ * __switch_to()
+ *
+ * Call with:
+ * void *__switch_to(struct task_struct *prev, struct thread_struct *prev_switch,
+ * struct thread_struct *next_switch)
+ */
+ .global __switch_to
+__switch_to:
+
+ /*
+ * Set up register a3 to point to save area.
+ */
+ movea a3, d1 ; a3 now holds prev_switch
+ move.4 (a3)4++, d10
+ move.4 (a3)4++, d11
+ move.4 (a3)4++, d12
+ move.4 (a3)4++, d13
+ move.4 (a3)4++, a1
+ move.4 (a3)4++, a2
+ move.4 (a3)4++, a5
+ move.4 (a3)4++, a6
+ move.4 (a3)4++, a7
+
+ /*
+ * Set up register a3 to point to restore area.
+ */
+ movea a3, d2 ; a3 now holds next_switch
+ move.4 d10 , (a3)4++
+ move.4 d11 , (a3)4++
+ move.4 d12 , (a3)4++
+ move.4 d13 , (a3)4++
+ move.4 a1 , (a3)4++
+ move.4 a2 , (a3)4++
+ move.4 a5 , (a3)4++
+ move.4 a6 , (a3)4++
+ move.4 a7 , (a3)4++
+
+ /*
+ * Load the sw_ksp with the proper thread_info pointer.
+ */
+ movei d15, #(~(ASM_THREAD_SIZE-1))
+ and.4 a3, sp, d15 ; a3 now has the thread info pointer
+ moveai a4, #%hi(sw_ksp)
+ lea.1 a4, %lo(sw_ksp)(a4) ; a4 now has the base address of sw_ksp array
+ lsr.4 d15, ROSR, #2 ; Thread number + garbage
+ and.4 d15, #31, D15 ; Mask to get thread number into register D15
+ move.4 (a4, d15), a3 ; Load the thread info pointer into the hw_ksp array..
+
+ /*
+ * We are done with context switch. Time to return..
+ */
+ ret a5
+
+
+/*
+ * ubicom32_emulate_insn()
+ * Emulates the instruction.
+ *
+ * Call with:
+ * unsigned int ubicom32_emulate_insn(int source1, int source2, int source3, int *save_acc, int *save_csr);
+ */
+ .global ubicom32_emulate_insn
+ .global trap_emulate
+ubicom32_emulate_insn:
+ movea a3, d3 ; a3 holds save_acc pointer
+ movea a4, d4 ; a4 hods save_csr pointer
+ move.4 source3, d2
+ move.4 acc0_lo, (a3)
+ move.4 acc0_hi, 4(a3)
+ move.4 acc1_lo, 8(a3)
+ move.4 acc1_hi, 12(a3)
+ move.4 mac_rc16, 16(a3)
+ move.4 CSR, (a4)
+ setcsr_flush 0
+
+trap_emulate:
+ move.4 d0, d1
+ setcsr_flush 0
+ move.4 (a4), CSR ; Save csr
+ move.4 (a3), acc0_lo
+ move.4 4(a3), acc0_hi
+ move.4 8(a3), acc1_lo
+ move.4 12(a3), acc1_hi
+ move.4 16(a3), mac_rc16
+ ret a5
--- /dev/null
+++ b/arch/ubicom32/kernel/ubicom32_ksyms.c
@@ -0,0 +1,95 @@
+/*
+ * arch/ubicom32/kernel/ubicom32_ksyms.c
+ * Ubicom32 architecture compiler support and misc symbols.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/linkage.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+
+#include <asm/setup.h>
+#include <asm/machdep.h>
+#include <asm/pgalloc.h>
+#include <asm/irq.h>
+#include <asm/checksum.h>
+#include <asm/current.h>
+
+/* platform dependent support */
+
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+
+EXPORT_SYMBOL(ip_fast_csum);
+
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+/* The following are special because they're not called
+ explicitly (the C compiler generates them). Fortunately,
+ their interface isn't gonna change any time soon now, so
+ it's OK to leave it out of version control. */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) || __GNUC__ > 4
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+
+/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+#else
+extern void __libgcc_udivmodsi(void);
+extern void __libgcc_divmodsi(void);
+
+EXPORT_SYMBOL(__libgcc_udivmodsi);
+EXPORT_SYMBOL(__libgcc_divmodsi);
+#endif
--- /dev/null
+++ b/arch/ubicom32/kernel/ubicom32_syscall.S
@@ -0,0 +1,643 @@
+/*
+ * arch/ubicom32/kernel/ubicom32_syscall.S
+ * <TODO: Replace with short file description>
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <linux/unistd.h>
+
+#include <asm/ubicom32-common.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/range-protect.h>
+
+/*
+ * system_call()
+ */
+ .section .syscall_entry.text
+ .global system_call
+system_call:
+ /*
+ * Regular ABI rules for function calls apply for syscall. d8 holds
+ * the syscall number. We will use that to index into the syscall table.
+ * d0 - d5 hold the parameters.
+ *
+ * First we get the current thread_info and swap to the kernel stack.
+ * This is done by reading the current thread and looking up the ksp
+ * from the sw_ksp array and storing it in a3.
+ *
+ * Then we reserve space for the syscall context a struct pt_regs and
+ * save it using a4 initially and later as sp.
+ * Once sp is set to the kernel sp we can leave the critical section.
+ *
+ * For the user case the kernel stack will have the following layout.
+ *
+ * a3 ksp[0] +-----------------------+
+ * | Thread info area |
+ * | struct thread_info |
+ * +-----------------------+
+ * : :
+ * | Kernel Stack Area |
+ * | |
+ * a4 / sp >>> +-----------------------+
+ * | Context save area |
+ * | struct pt_reg |
+ * ksp[THREAD_SIZE-8] +-----------------------+
+ * | 8 Byte Buffer Zone |
+ * ksp[THREAD_SIZE] +-----------------------+
+
+ *
+ * For kernel syscalls the layout is as follows.
+ *
+ * a3 ksp[0] +-----------------------+
+ * | Thread info area |
+ * | struct thread_info |
+ * +-----------------------+
+ * : :
+ * | Kernel Stack Area |
+ * | |
+ * a4 / sp >>> +-----------------------+
+ * | Context save area |
+ * | struct pt_reg |
+ * sp at syscall entry +-----------------------+
+ * | Callers Kernel Stack |
+ * : :
+ *
+ * Once the context is saved we optionally call syscall_trace and setup
+ * the exit routine and jump to the syscall.
+ */
+
+ /*
+ * load the base address for sw_ksp into a3
+ * Note.. we cannot access it just yet as protection is still on.
+ */
+ moveai a3, #%hi(sw_ksp)
+ lea.1 a3, %lo(sw_ksp)(a3)
+
+ /*
+ * Enter critical section .
+ *
+ * The 'critical' aspects here are the switching the to the ksp and
+ * changing the protection registers, these both use per thread
+ * information so we need to protect from a context switch. For now this
+ * is done using the global atomic lock.
+ */
+ atomic_lock_acquire
+
+ thread_get_self d15 ; Load current thread number
+#ifdef CONFIG_PROTECT_KERNEL
+ lsl.4 d9, #1, d15 ; Convert to thread bit
+ enable_kernel_ranges d9
+#endif
+ /*
+ * We need to Determine if this is a kernel syscall or user syscall.
+ * Start by loading the pointer for the thread_info structure for the
+ * current process in to a3.
+ */
+ move.4 a3, (a3, d15) ; a3 = sw_ksp[d15]
+
+ /*
+ * Now if this is a kernel thread the same value can be a acheived by
+ * masking off the lower bits on the current stack pointer.
+ */
+ movei d9, #(~(ASM_THREAD_SIZE-1)) ; load mask
+ and.4 d9, sp, d9 ; apply mask
+
+ /*
+ * d9 now has the masked version of the sp. If this is identical to
+ * what is in a3 then don't switch to ksp as we are already in the
+ * kernel.
+ */
+ sub.4 #0, a3, d9
+
+ /*
+ * if d9 and a3 are not equal. We are usespace and have to shift to
+ * ksp.
+ */
+ jmpne.t 1f
+
+ /*
+ * Kernel Syscall.
+ *
+ * The kernel has called this routine. We have to pdec space for pt_regs
+ * from sp.
+ */
+ pdec a4, PT_SIZE(sp) ; a4 = ksp - PT_SIZE
+ jmpt.t 2f
+
+ /*
+ * Userspace Syscall.
+ *
+ * Add THREAD_SIZE and subtract PT_SIZE to create the proper ksp
+ */
+1: movei d15, #(ASM_THREAD_SIZE - 8 - PT_SIZE)
+ lea.1 a4, (a3, d15) ; a4 = ksp + d15
+
+ /*
+ * Replace user stack pointer with kernel stack pointer (a4)
+ * Load -1 into frame_type in save area to indicate this is system call
+ * frame.
+ */
+2: move.4 PT_A7(a4), a7 ; Save old sp/A7 on kernel stack
+ move.4 PT_FRAME_TYPE(a4), #-1 ; Set the frame type.
+ move.4 sp, a4 ; Change to ksp.
+ /*
+ * We are now officially back in the kernel!
+ */
+
+ /*
+ * Now that we are on the ksp we can leave the critical section
+ */
+ atomic_lock_release
+
+ /*
+ * We need to save a0 because we need to be able to restore it in
+ * the event that we need to handle a signal. It's not generally
+ * a callee-saved register but is the GOT pointer.
+ */
+ move.4 PT_A0(sp), a0 ; Save A0 on kernel stack
+
+ /*
+ * We still need to save d10-d13, a1, a2, a5, a6 in the kernel frame
+ * for this process, we also save the system call params in the case of
+ * syscall restart. (note a7 was saved above)
+ */
+ move.4 PT_A1(sp), a1 ; Save A1 on kernel stack
+ move.4 PT_A2(sp), a2 ; Save A2 on kernel stack
+ move.4 PT_A5(sp), a5 ; Save A5 on kernel stack
+ move.4 PT_A6(sp), a6 ; Save A6 on kernel stack
+ move.4 PT_PC(sp), a5 ; Save A5 at the PC location
+ move.4 PT_D10(sp), d10 ; Save D10 on kernel stack
+ move.4 PT_D11(sp), d11 ; Save D11 on kernel stack
+ move.4 PT_D12(sp), d12 ; Save D12 on kernel stack
+ move.4 PT_D13(sp), d13 ; Save D13 on kernel stack
+
+ /*
+ * Now save the syscall parameters
+ */
+ move.4 PT_D0(sp), d0 ; Save d0 on kernel stack
+ move.4 PT_ORIGINAL_D0(sp), d0 ; Save d0 on kernel stack
+ move.4 PT_D1(sp), d1 ; Save d1 on kernel stack
+ move.4 PT_D2(sp), d2 ; Save d2 on kernel stack
+ move.4 PT_D3(sp), d3 ; Save d3 on kernel stack
+ move.4 PT_D4(sp), d4 ; Save d4 on kernel stack
+ move.4 PT_D5(sp), d5 ; Save d5 on kernel stack
+ /* add this back if we ever have a syscall with 7 args */
+ move.4 PT_D8(sp), d8 ; Save d8 on kernel stack
+
+ /*
+ * Test if syscalls are being traced and if they are jump to syscall
+ * trace (it will comeback here)
+ */
+ btst TI_FLAGS(a3), #ASM_TIF_SYSCALL_TRACE
+ jmpne.f .Lsystem_call__trace
+.Lsystem_call__trace_complete:
+ /*
+ * Check for a valid call number [ 0 <= syscall_number < NR_syscalls ]
+ */
+ cmpi d8, #0
+ jmplt.f 3f
+ cmpi d8, #NR_syscalls
+ jmplt.t 4f
+
+ /*
+ * They have passed an invalid number. Call sys_ni_syscall staring by
+ * load a4 with the base address of sys_ni_syscall
+ */
+3: moveai a4, #%hi(sys_ni_syscall)
+ lea.1 a4, %lo(sys_ni_syscall)(a4)
+ jmpt.t 5f ; Jump to regular processing
+
+ /*
+ * Validated syscall, load the syscall table base address into a3 and
+ * read the syscall ptr out.
+ */
+4: moveai a3, #%hi(sys_call_table)
+ lea.1 a3, %lo(sys_call_table)(a3) ; a3 = sys_call_table
+ move.4 a4, (a3, d8) ; a4 = sys_call_table[d8]
+
+ /*
+ * Before calling the syscall, setup a5 so that syscall_exit is called
+ * on return from syscall
+ */
+5: moveai a5, #%hi(syscall_exit) ; Setup return address
+ lea.1 a5, %lo(syscall_exit)(a5) ; from system call
+
+ /*
+ * If the syscall is __NR_rt_rigreturn then we have to test d1 to
+ * figure out if we have to change change the return routine to restore
+ * all registers.
+ */
+ cmpi d8, #__NR_rt_sigreturn
+ jmpeq.f 6f
+
+ /*
+ * Launch system call (it will return through a5 - syscall_exit)
+ */
+ calli a3, 0(a4)
+
+ /*
+ * System call is rt_sigreturn. Test d1. If it is 1 we have to
+ * change the return address to restore_all_registers
+ */
+6: cmpi d1, #1
+ jmpne.t 7f
+
+ moveai a5, #%hi(restore_all_registers) ; Setup return address
+ lea.1 a5, %lo(restore_all_registers)(a5) ; to restore_all_registers.
+
+ /*
+ * Launch system call (it will return through a5)
+ */
+7: calli a3, 0(a4) ; Launch system call
+
+.Lsystem_call__trace:
+ /*
+ * Syscalls are being traced.
+ * Call syscall_trace, (return here)
+ */
+ moveai a4, #%hi(syscall_trace)
+ calli a5, %lo(syscall_trace)(a4)
+
+ /*
+ * Restore syscall state (it would have been discarded during the
+ * syscall trace)
+ */
+ move.4 d0, PT_D0(sp) ; Restore d0 from kernel stack
+ move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
+ move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
+ move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
+ move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
+ move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
+ /* add this back if we ever have a syscall with 7 args */
+ move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
+
+ /*
+ * return to syscall
+ */
+ jmpt.t .Lsystem_call__trace_complete
+ .size system_call, . - system_call
+
+/*
+ * syscall_exit()
+ */
+ .section .syscall_exit.text
+ .global syscall_exit
+syscall_exit:
+ /*
+ * d0 contains the return value. We should move that into the kernel
+ * stack d0 location. We will be transitioning from kernel to user
+ * mode. Test the flags and see if we have to call schedule. If we are
+ * going to truly exit then all that has to be done is that from the
+ * kernel stack we have to restore d0, a0, a1, a2, a5, a6 and sp (a7)bb
+ * and then return via a5.
+ */
+
+ /*
+ * Save d0 to pt_regs
+ */
+ move.4 PT_D0(sp), d0 ; Save d0 into the kernel stack
+
+ /*
+ * load the thread_info structure by masking off the THREAD_SIZE
+ * bits.
+ *
+ * Note: we used to push a1, but now we don't as we are going
+ * to eventually restore it to the userspace a1.
+ */
+ movei d9, #(~(ASM_THREAD_SIZE-1))
+ and.4 a1, sp, d9
+
+ /*
+ * Are any interesting bits set on TI flags, if there are jump
+ * aside to post_processing.
+ */
+ move.4 d9, #(_TIF_SYSCALL_TRACE | _TIF_NEED_RESCHED | _TIF_SIGPENDING)
+ and.4 #0, TI_FLAGS(a1), d9
+ jmpne.f .Lsyscall_exit__post_processing ; jump to handler
+.Lsyscall_exit__post_processing_complete:
+
+ move.4 d0, PT_D0(sp) ; Restore D0 from kernel stack
+ move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack
+ move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack
+ move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack
+ move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack
+ move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack
+ move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack
+ move.4 d10, PT_D10(sp) ; Restore d10 from kernel stack
+ move.4 d11, PT_D11(sp) ; Restore d11 from kernel stack
+ move.4 d12, PT_D12(sp) ; Restore d12 from kernel stack
+ move.4 d13, PT_D13(sp) ; Restore d13 from kernel stack
+ move.4 a1, PT_A1(sp) ; Restore A1 from kernel stack
+ move.4 a2, PT_A2(sp) ; Restore A2 from kernel stack
+ move.4 a5, PT_A5(sp) ; Restore A5 from kernel stack
+ move.4 a6, PT_A6(sp) ; Restore A6 from kernel stack
+ move.4 a0, PT_A0(sp) ; Restore A6 from kernel stack
+
+ /*
+ * this is only for debug, and could be removed for production builds
+ */
+ move.4 PT_FRAME_TYPE(sp), #0 ; invalidate frame_type
+
+#ifdef CONFIG_PROTECT_KERNEL
+ /*
+ * Enter critical section
+ */
+ atomic_lock_acquire
+ disable_kernel_ranges_for_current d15
+#endif
+ /*
+ * Lastly restore userspace stack ptr
+ *
+ * Note: that when protection is on we need to hold the lock around the
+ * stack swap as well because otherwise the protection could get
+ * inadvertently disabled again at the end of a context switch.
+ */
+ move.4 a7, PT_A7(sp) ; Restore A7 from kernel stack
+
+ /*
+ * We are now officially back in userspace!
+ */
+
+#ifdef CONFIG_PROTECT_KERNEL
+ /*
+ * Leave critical section and return to user space.
+ */
+ atomic_lock_release
+#endif
+ calli a5, 0(a5) ; Back to userspace code.
+
+ bkpt #-1 ; we will never get here
+
+ /*
+ * Post syscall processing. (unlikely part of syscall_exit)
+ *
+ * Are we tracing syscalls. If TIF_SYSCALL_TRACE is set, call
+ * syscall_trace routine and return here.
+ */
+.Lsyscall_exit__post_processing:
+ btst TI_FLAGS(a1), #ASM_TIF_SYSCALL_TRACE
+ jmpeq.t 1f
+ moveai a5, #%hi(syscall_trace)
+ calli a5, %lo(syscall_trace)(a5)
+
+ /*
+ * Do we need to resched ie call schedule. If TIF_NEED_RESCHED is set,
+ * call the scheduler, it will come back here.
+ */
+1: btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED
+ jmpeq.t 2f
+ moveai a5, #%hi(schedule)
+ calli a5, %lo(schedule)(a5)
+
+ /*
+ * Do we need to post a signal, if TIF_SIGPENDING is set call the
+ * do_signal.
+ */
+2: btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING
+ jmpeq.t .Lsyscall_exit__post_processing_complete
+
+ /*
+ * setup the do signal call
+ */
+ move.4 d0, #0 ; oldset pointer is NULL
+ lea.1 d1, (sp) ; d1 is the regs pointer.
+ moveai a5, #%hi(do_signal) ; Have to call do_signal
+ calli a5, %lo(do_signal)(a5)
+
+ jmpt.t .Lsyscall_exit__post_processing_complete
+
+ .size syscall_exit, . - syscall_exit
+
+/*
+ * kernel_execve()
+ * kernel_execv is called when we the kernel is starting a
+ * userspace application.
+ */
+ .section .kernel_unprotected
+ .global kernel_execve
+kernel_execve:
+ move.4 -4(sp)++, a5 ; Save return address
+ /*
+ * Call execve
+ */
+ movei d8, #__NR_execve ; call execve
+ moveai a3, #%hi(system_call)
+ calli a5, %lo(system_call)(a3)
+ move.4 a5, (sp)4++
+
+ /*
+ * protection was enabled again at syscall exit, but we want
+ * to return to kernel so we enable it again.
+ */
+#ifdef CONFIG_PROTECT_KERNEL
+ /*
+ * We are entering the kernel so we need to disable the protection.
+ * Enter critical section, disable ranges and leave critical section.
+ */
+ atomic_lock_acquire ; Enter critical section
+ enable_kernel_ranges_for_current d15
+ atomic_lock_release ; Leave critical section
+#endif
+ ret a5 ; jump back to the kernel
+
+ .size kernel_execve, . - kernel_execve
+
+/*
+ * signal_trampoline()
+ *
+ * Deals with transitioning from to userspace signal handlers and returning
+ * to userspace, only called from the kernel.
+ *
+ */
+ .section .kernel_unprotected
+ .global signal_trampoline
+signal_trampoline:
+ /*
+ * signal_trampoline is called when we are jumping from the kernel to
+ * the userspace signal handler.
+ *
+ * The following registers are relevant. (set setup_rt_frame)
+ * sp is the user space stack not the kernel stack
+ * d0 = signal number
+ * d1 = siginfo_t *
+ * d2 = ucontext *
+ * d3 = the user space signal handler
+ * a0 is set to the GOT if userspace application is FDPIC, otherwise 0
+ * a3 is set to the FD for the signal if userspace application is FDPIC
+ */
+#ifdef CONFIG_PROTECT_KERNEL
+ /*
+ * We are leaving the kernel so we need to enable the protection.
+ * Enter critical section, disable ranges and leave critical section.
+ */
+ atomic_lock_acquire ; Enter critical section
+ disable_kernel_ranges_for_current d15 ; disable kernel ranges
+ atomic_lock_release ; Leave critical section
+#endif
+ /*
+ * The signal handler pointer is in register d3 so tranfer it to a4 and
+ * call it
+ */
+ movea a4, d3 ; signal handler
+ calli a5, 0(a4)
+
+ /*
+ * Return to userspace through rt_syscall which is stored on top of the
+ * stack d1 contains ret_via_interrupt status.
+ */
+ move.4 d8, (sp) ; d8 (syscall #) = rt_syscall
+ move.4 d1, 4(sp) ; d1 = ret_via_interrupt
+ moveai a3, #%hi(system_call) ; call system_call
+ calli a5, %lo(system_call)(a3)
+
+ bkpt -1 ; will never get here.
+ .size signal_trampoline, . - signal_trampoline
+
+/*
+ * kernel_thread_helper()
+ *
+ * Entry point for kernel threads (only referenced by kernel_thread()).
+ *
+ * On execution d0 will be 0, d1 will be the argument to be passed to the
+ * kernel function.
+ * d2 contains the kernel function that needs to get called.
+ * d3 will contain address to do_exit which needs to get moved into a5.
+ *
+ * On return from fork the child thread d0 will be 0. We call this dummy
+ * function which in turn loads the argument
+ */
+ .section .kernel_unprotected
+ .global kernel_thread_helper
+kernel_thread_helper:
+ /*
+ * Create a kernel thread. This is called from ret_from_vfork (a
+ * userspace return routine) so we need to put it in an unprotected
+ * section and re-enable protection before calling the vector in d2.
+ */
+
+#ifdef CONFIG_PROTECT_KERNEL
+ /*
+ * We are entering the kernel so we need to disable the protection.
+ * Enter critical section, disable ranges and leave critical section.
+ */
+ atomic_lock_acquire ; Enter critical section
+ enable_kernel_ranges_for_current d0
+ atomic_lock_release ; Leave critical section
+#endif
+ /*
+ * Move argument for kernel function into d0, and set a5 return address
+ * (a5) to do_exit and return through a2
+ */
+ move.4 d0, d1 ; d0 = arg
+ move.4 a5, d3 ; a5 = do_exit
+ ret d2 ; call function ptr in d2
+
+ .size kernel_thread_helper, . - kernel_thread_helper
+
+/*
+ * execve_intercept()
+ */
+ .section .text
+ .global execve_intercept
+execve_intercept:
+ move.4 d3, sp ; Save retrun address
+ moveai a3, #%hi(sys_execve)
+ calli a3, %lo(sys_execve)(a3)
+
+ .size execve_intercept, . - execve_intercept
+
+/*
+ * vfork_intercept()
+ */
+ .section .text
+ .global vfork_intercept
+vfork_intercept:
+ move.4 d0, sp ; Save pt_regs address
+ moveai a3, #%hi(sys_vfork)
+ calli a3, %lo(sys_vfork)(a3)
+
+ .size vfork_intercept, . - vfork_intercept
+
+/*
+ * clone_intercept()
+ */
+ .section .text
+ .global clone_intercept
+clone_intercept:
+ move.4 d2, sp ; Save pt_regs address
+ moveai a3, #%hi(sys_clone)
+ calli a3, %lo(sys_clone)(a3)
+
+ .size clone_intercept, . - clone_intercept
+
+/*
+ * sys_sigsuspend()
+ */
+ .section .text
+ .global sys_sigsuspend
+sys_sigsuspend:
+ move.4 d0, sp ; Pass pointer to pt_regs in d0
+ moveai a3, #%hi(do_sigsuspend)
+ calli a3, %lo(do_sigsuspend)(a3)
+
+ .size sys_sigsuspend, . - sys_sigsuspend
+
+/*
+ * sys_rt_sigsuspend()
+ */
+ .section .text
+ .global sys_rt_sigsuspend
+sys_rt_sigsuspend:
+ move.4 d0, sp ; Pass pointer to pt_regs in d0
+ moveai a3, #%hi(do_rt_sigsuspend)
+ calli a3, %lo(do_rt_sigsuspend)(a3)
+
+ .size sys_rt_sigsuspend, . - sys_rt_sigsuspend
+
+/*
+ * sys_rt_sigreturn()
+ */
+ .section .text
+ .global sys_rt_sigreturn
+sys_rt_sigreturn:
+ move.4 d0, sp ; Pass pointer to pt_regs in d0
+ moveai a3, #%hi(do_rt_sigreturn)
+ calli a3, %lo(do_rt_sigreturn)(a3)
+
+ .size sys_rt_sigreturn, . - sys_rt_sigreturn
+
+/*
+ * sys_sigaltstack()
+ */
+ .section .text
+ .global sys_sigaltstack
+sys_sigaltstack:
+ move.4 d0, sp ; Pass pointer to pt_regs in d0
+ moveai a3, #%hi(do_sys_sigaltstack)
+ calli a3, %lo(do_sys_sigaltstack)(a3)
+
+ .size sys_sigaltstack, . - sys_sigaltstack
--- /dev/null
+++ b/arch/ubicom32/kernel/unaligned_trap.c
@@ -0,0 +1,698 @@
+/*
+ * arch/ubicom32/kernel/unaligned_trap.c
+ * Handle unaligned traps in both user or kernel space.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#define FALSE 0
+#define TRUE 1
+
+/* no possible trap */
+#define UNUSED 0
+/* possible source operand trap */
+#define SRC 1
+#define SRC_2 2
+/* possible destination operand trap */
+#define DEST 3
+#define DEST_2 4
+/* can be either source or destination or both */
+#define TWO_OP 5
+#define TWO_OP_2 6
+
+/* TODO: What is the real value here, put something in to make it compile for
+ * now */
+#define MOVE_2 0x0d
+#define LSL_2 0x11
+#define LSR_2 0x13
+#define MOVEI 0x19
+#define CMPI 0x18
+
+static int op_format[32] =
+{
+ TWO_OP, /* 0x00 */
+ UNUSED,
+ SRC,
+ UNUSED,
+ TWO_OP, /* 0x04 */
+ TWO_OP,
+ SRC,
+ UNUSED,
+ TWO_OP_2, /* 0x08 */
+ TWO_OP,
+ TWO_OP_2,
+ TWO_OP,
+ TWO_OP_2, /* 0x0C */
+ TWO_OP,
+ TWO_OP_2,
+ TWO_OP,
+ TWO_OP, /* 0x10 */
+ TWO_OP_2,
+ TWO_OP,
+ TWO_OP,
+ UNUSED, /* 0x14 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ SRC_2, /* 0x18 */
+ DEST_2,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x1C */
+ UNUSED,
+ UNUSED, /* unaligned CALLI will not be fixed. */
+ UNUSED
+};
+
+static int op_0_format[32] =
+{
+ UNUSED, /* 0x00 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x04 - ret don't fix - bad ret is always wrong */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x08 */
+ UNUSED,
+ TWO_OP,
+ TWO_OP_2,
+ TWO_OP, /* 0x0c */
+ TWO_OP_2,
+ TWO_OP,
+ UNUSED, /* .1 can't trap */
+ UNUSED, /* 0x10 */
+ UNUSED,
+ SRC,
+ UNUSED,
+ UNUSED, /* 0x14 */
+ TWO_OP_2,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x18 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ DEST, /* 0x1c */
+ DEST,
+ DEST,
+ DEST, /* all lea have 32-bit destination */
+};
+
+static int op_2_format[32] =
+{
+ UNUSED, /* 0x00 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x04 */
+ UNUSED,
+ SRC,
+ UNUSED,
+ UNUSED, /* 0x08 crcgen is .1 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x0c */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ SRC, /* 0x10 */
+ SRC_2,
+ SRC,
+ SRC_2,
+ SRC, /* 0x14 */
+ SRC_2,
+ SRC,
+ UNUSED,
+ UNUSED, /* 0x18 */
+ UNUSED,
+ SRC,
+ UNUSED,
+ SRC, /* 0x1c */
+ UNUSED,
+ SRC_2,
+ UNUSED,
+};
+
+static int op_6_format[32] =
+{
+ SRC_2, /* 0x00 */
+ SRC_2,
+ SRC_2,
+ SRC_2,
+ SRC_2, /* 0x04 */
+ SRC_2,
+ UNUSED,
+ SRC_2,
+ SRC, /* 0x08 MULS.4 */
+ SRC_2,
+ SRC,
+ UNUSED,
+ UNUSED, /* 0x0c */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ SRC, /* 0x10 */
+ SRC_2,
+ SRC,
+ SRC_2,
+ UNUSED, /* 0x14 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x18 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED, /* 0x1c */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+};
+
+/*
+ * unaligned_get_address()
+ * get an address using save_an and save_dn registers, and updates save_an
+ * with side effects
+ */
+unsigned char *unaligned_get_address(int thread, int specifier, int four_byte,
+ unsigned int save_an[],
+ unsigned int save_dn[], int *write_back_an)
+{
+ unsigned char *address;
+
+ int areg = (specifier >> 5) & 7;
+ if ((specifier >> 8) == 2) {
+ int offset = specifier & 0xf;
+ offset = ((offset << 28) >> 28);
+ if (likely(four_byte)) {
+ offset <<= 2;
+ } else {
+ offset <<= 1;
+ }
+ if (specifier & 0x10) {
+ address = (unsigned char *)(save_an[areg] + offset);
+ } else {
+ address = (unsigned char *)save_an[areg];
+ }
+ save_an[areg] = save_an[areg] + offset;
+
+ /*
+ * Let caller know An registers have been modified.
+ */
+ *write_back_an = 1;
+ } else if ((specifier >> 8) == 3) {
+ int dreg = specifier & 0xf;
+ if (likely(four_byte)) {
+ address = (unsigned char *)(save_an[areg] +
+ (save_dn[dreg] << 2));
+ } else {
+ address = (unsigned char *)(save_an[areg] +
+ (save_dn[dreg] << 1));
+ }
+ } else {
+ int offset = ((specifier >> 3) & 0x60) | (specifier & 0x1f);
+ if (likely(four_byte)) {
+ address = (unsigned char *)(save_an[areg] +
+ (offset << 2));
+ } else {
+ address = (unsigned char *)(save_an[areg] +
+ (offset << 1));
+ }
+ }
+
+ return address;
+}
+
+static int save_dn[16];
+static int save_an[8];
+static int save_acc[5];
+
+/*
+ * unaligned_emulate()
+ * emulate the instruction at thread's pc that has taken an unaligned data
+ * trap.
+ *
+ * source or destination or both might be unaligned
+ * the instruction must have a memory source or destination or both
+ * the emulated instruction is copied and executed in this thread
+ *
+ * TODO: Protection is handled outside of this function
+ * TODO: handling simultaneous unaligned and memory protection traps
+ *
+ * Get thread state
+ * the PC and instruction (and local copy, emulate_inst), and An
+ * and Dn registers
+ * All implicit soruce state (source3, CSR, accumulators)
+
+ * if the instruction has a memory source
+ * Use the instruction, An and Dn registers to form src_address
+ * get unaligned source data from src_address (usually sign
+ * extended)
+ * (2 bytes, with or without sign extension, or 4 bytes)
+ * modify emulate_inst to use d0 as source
+ * else
+ * get the soure operand from one of thread's registers
+ * if instruction has a memory destination
+ * Use the instruction, An and Dn registers to form dest_address
+ * modify emulate_inst to use d0 as destination
+ * if there was a memory source
+ * put the source data in thread's d0
+ * get the source-2 Dn operand and source 3 operand from thread
+ * execute modified inst
+ * (save it, flush caches, set up local values for implicit
+ * sources, execute, save explicit and implicit results)
+ * if inst has destination address
+ * copy result to dest_address, possibly unaligned, 1, 2, or 4
+ * bytes
+ * restore thread's implicit results (modified address registers, CSR,
+ * accumulators) add 4 to thread's pc
+ */
+void unaligned_emulate(unsigned int thread)
+{
+ unsigned int pc;
+ unsigned int inst;
+ unsigned int op;
+ unsigned int subop;
+ int format;
+ unsigned int emulate_inst;
+ int four_byte;
+ int src_operand, dest_operand;
+ int save_csr;
+ int source3;
+ unsigned int source1;
+ unsigned int source_data;
+ unsigned char *dest_address = NULL;
+ int source2 = 0;
+ unsigned int result;
+ unsigned int write_back_an = 0;
+ unsigned int chip_id_copy;
+
+ extern unsigned int trap_emulate;
+ extern unsigned int ubicom32_emulate_insn(int source1, int source2,
+ int source3, int *save_acc,
+ int *save_csr);
+
+ /*
+ * get the chip_id
+ */
+ asm volatile (
+ " move.4 %0, chip_id \n\t" /* get chip_id. */
+ : "=r"(chip_id_copy)
+ :
+ );
+
+ /*
+ * get the pc
+ */
+ asm volatile (
+ " move.4 CSR, %1 \n\t" /* set source thread in
+ * CSR */
+ " setcsr_flush 0 \n\t"
+ " move.4 %0, pc \n\t"
+ " move.4 CSR, #0 \n\t" /* restore CSR */
+ " setcsr_flush 0 \n\t"
+ : "=a"(pc)
+ : "d" ((1 << 8) | (thread << 9))
+ : "cc"
+ );
+
+ inst = *((unsigned int *)pc);
+ op = inst >> 27;
+ if (unlikely(op == 2 || op == 6)) {
+ subop = (inst >> 21) & 0x1f;
+ } else {
+ subop = (inst >> 11) & 0x1f;
+ }
+ format = op_format[op];
+ emulate_inst = inst;
+
+ if (op == 0) {
+ format = op_0_format[subop];
+ } else if (op == 2) {
+ format = op_2_format[subop];
+ } else if (op == 6) {
+ format = op_6_format[subop];
+ }
+
+ if (unlikely(format == UNUSED)) {
+ /*
+ * We are not going to emulate this. Bump PC by 4 and move on.
+ */
+ asm volatile (
+ " move.4 CSR, %0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 pc, %1 \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ :
+ : "d"((1 << 14) | (thread << 15)), "d"(pc + 4)
+ : "cc"
+ );
+ return;
+ }
+
+ four_byte = (format == TWO_OP || format == DEST || format == SRC);
+
+ /*
+ * source or destination memory operand needs emulation
+ */
+ src_operand = (format == SRC ||
+ format == SRC_2 ||
+ format == TWO_OP ||
+ format == TWO_OP_2) &&
+ ((inst >> 8) & 7) > 1;
+
+ dest_operand = (format == DEST ||
+ format == DEST_2 ||
+ format == TWO_OP ||
+ format == TWO_OP_2) &&
+ ((inst >> 24) & 7) > 1;
+
+ /*
+ * get thread's implicit sources (not covered by source context select).
+ * data and address registers and CSR (for flag bits) and src3 and
+ * accumulators
+ */
+ asm volatile (
+ " move.4 CSR, %2 \n\t" /* set source thread in
+ * CSR */
+ " setcsr_flush 0 \n\t"
+ " move.4 (%3), d0 \n\t" /* get dn registers */
+ " move.4 4(%3), d1 \n\t"
+ " move.4 8(%3), d2 \n\t"
+ " move.4 12(%3), d3 \n\t"
+ " move.4 16(%3), d4 \n\t"
+ " move.4 20(%3), d5 \n\t"
+ " move.4 24(%3), d6 \n\t"
+ " move.4 28(%3), d7 \n\t"
+ " move.4 32(%3), d8 \n\t"
+ " move.4 36(%3), d9 \n\t"
+ " move.4 40(%3), d10 \n\t"
+ " move.4 44(%3), d11 \n\t"
+ " move.4 48(%3), d12 \n\t"
+ " move.4 52(%3), d13 \n\t"
+ " move.4 56(%3), d14 \n\t"
+ " move.4 60(%3), d15 \n\t"
+ " move.4 (%4), a0 \n\t" /* get an registers */
+ " move.4 4(%4), a1 \n\t"
+ " move.4 8(%4), a2 \n\t"
+ " move.4 12(%4), a3 \n\t"
+ " move.4 16(%4), a4 \n\t"
+ " move.4 20(%4), a5 \n\t"
+ " move.4 24(%4), a6 \n\t"
+ " move.4 28(%4), a7 \n\t"
+ " move.4 %0, CSR \n\t" /* get csr and source3
+ * implicit operands */
+ " move.4 %1, source3 \n\t"
+ " move.4 (%5), acc0_lo \n\t" /* get accumulators */
+ " move.4 4(%5), acc0_hi \n\t"
+ " move.4 8(%5), acc1_lo \n\t"
+ " move.4 12(%5), acc1_hi \n\t"
+ " move.4 16(%5), mac_rc16 \n\t"
+ " move.4 CSR, #0 \n\t" /* restore CSR */
+ " setcsr_flush 0 \n\t"
+ : "=m"(save_csr), "=m"(source3)
+ : "d"((1 << 8) | (thread << 9)),
+ "a"(save_dn), "a"(save_an), "a"(save_acc)
+ : "cc"
+ );
+
+ /*
+ * turn off thread select bits if they were on
+ */
+ BUG_ON((save_csr & 0x04100) != 0);
+ if (unlikely(save_csr & 0x04100)) {
+ /*
+ * Things are in funny state as thread select bits are on in
+ * csr. PANIC.
+ */
+ panic("In unaligned trap handler. Trap thread CSR has thread "
+ "select bits on.\n");
+ }
+
+ save_csr = save_csr & 0x1000ff;
+
+ /*
+ * get the source1 operand
+ */
+ source1 = 0;
+ if (src_operand) {
+ unsigned char *src_address;
+
+ /*
+ * source1 comes from memory
+ */
+ BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
+ format == SRC || format == SRC_2));
+ src_address = unaligned_get_address(thread, inst & 0x7ff,
+ four_byte, save_an,
+ save_dn, &write_back_an);
+
+ /*
+ * get data (possibly unaligned)
+ */
+ if (likely(four_byte)) {
+ source_data = (*src_address << 24) |
+ (*(src_address + 1) << 16) |
+ (*(src_address + 2) << 8) |
+ *(src_address + 3);
+ source1 = source_data;
+ } else {
+ source1 = *src_address << 8 |
+ *(src_address + 1);
+
+ /*
+ * Source is not extended if the instrution is MOVE.2 or
+ * if the cpu CHIP_ID >= 0x30000 and the instruction is
+ * either LSL.2 or LSR.2. All other cases have to be
+ * sign extended.
+ */
+ if ((!(op == 2 && subop == MOVE_2)) &&
+ (!((chip_id_copy >= 0x30000) &&
+ (subop == LSL_2 || subop == LSR_2)))) {
+ /*
+ * Have to sign extend the .2 entry.
+ */
+ source1 = ((unsigned int)
+ ((signed int)
+ ((signed short) source1)));
+ }
+ }
+ } else if (likely(op != MOVEI)) {
+ /*
+ * source1 comes from a register, using move.4 d0, src1
+ * unaligned_emulate_get_source is pointer to code to insert remulated instruction
+ */
+ extern unsigned int unaligned_emulate_get_src;
+ *((int *)&unaligned_emulate_get_src) &= ~(0x7ff);
+ *((int *)&unaligned_emulate_get_src) |= (inst & 0x7ff);
+ flush_dcache_range((unsigned long)(&unaligned_emulate_get_src),
+ (unsigned long)(&unaligned_emulate_get_src) + 4);
+
+ asm volatile (
+ /* source1 uses thread's registers */
+ " move.4 CSR, %1 \n\t"
+ " setcsr_flush 0 \n\t"
+ "unaligned_emulate_get_src: \n\t"
+ " move.4 %0, #0 \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ : "=d" (source1)
+ : "d" ((1 << 8) | (thread << 9))
+ : "cc"
+ );
+ }
+
+ /*
+ * get the destination address
+ */
+ if (dest_operand) {
+ BUG_ON(!(format == TWO_OP || format == TWO_OP_2 ||
+ format == DEST || format == DEST_2));
+ dest_address = unaligned_get_address(thread,
+ ((inst >> 16) & 0x7ff),
+ four_byte, save_an,
+ save_dn, &write_back_an);
+ }
+
+ if (write_back_an) {
+ /*
+ * restore any modified An registers
+ */
+ asm volatile (
+ " move.4 CSR, %0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 a0, (%1) \n\t"
+ " move.4 a1, 4(%1) \n\t"
+ " move.4 a2, 8(%1) \n\t"
+ " move.4 a3, 12(%1) \n\t"
+ " move.4 a4, 16(%1) \n\t"
+ " move.4 a5, 20(%1) \n\t"
+ " move.4 a6, 24(%1) \n\t"
+ " move.4 a7, 28(%1) \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ :
+ : "d" ((1 << 14) | (thread << 15)), "a" (save_an)
+ : "cc"
+ );
+ }
+
+ /*
+ * get source 2 register if needed, and modify inst to use d1 for
+ * source-2 source-2 will come from this thread, not the trapping thread
+ */
+ source2 = 0;
+ if ((op >= 8 && op <= 0x17) ||
+ ((op == 2 || op == 6) && (inst & 0x4000000))) {
+ int src_dn = (inst >> 11) & 0xf;
+ source2 = save_dn[src_dn];
+ /*
+ * force the emulated instruction to use d1 for source2 operand
+ */
+ emulate_inst = (emulate_inst & 0xffff07ff) | 0x800;
+ }
+
+ if (likely(op != MOVEI)) {
+ /*
+ * change emulated instruction source1 to d0
+ */
+ emulate_inst &= ~0x7ff;
+ emulate_inst |= 1 << 8;
+ }
+
+ if (unlikely(op == 6 || op == 2)) {
+ /*
+ * Set destination to d0
+ */
+ emulate_inst &= ~(0xf << 16);
+ } else if (likely(op != CMPI)) {
+ /*
+ * Set general destination field to d0.
+ */
+ emulate_inst &= ~(0x7ff << 16);
+ emulate_inst |= 1 << 24;
+ }
+
+ /*
+ * execute emulated instruction d0, to d0, no memory access
+ * source2 if needed will be in d1
+ * source3, CSR, and accumulators are set up before execution
+ */
+ *((unsigned int *)&trap_emulate) = emulate_inst;
+ flush_dcache_range((unsigned long)(&trap_emulate),
+ (unsigned long)(&trap_emulate) + 4);
+
+ result = ubicom32_emulate_insn(source1, source2, source3,
+ save_acc, &save_csr);
+
+ /*
+ * set the result value
+ */
+ if (dest_operand) {
+ /*
+ * copy result to memory
+ */
+ if (four_byte) {
+ *dest_address++ =
+ (unsigned char)((result >> 24) & 0xff);
+ *dest_address++ =
+ (unsigned char)((result >> 16) & 0xff);
+ }
+ *dest_address++ = (unsigned char)((result >> 8) & 0xff);
+ *dest_address = (unsigned char)(result & 0xff);
+ } else if (likely(op != CMPI)) {
+ /*
+ * copy result to a register, using move.4 dest, result
+ */
+ extern unsigned int unaligned_trap_set_result;
+ *((unsigned int *)&unaligned_trap_set_result) &= ~0x7ff0000;
+
+ if (op == 2 || op == 6) {
+ *((unsigned int *)&unaligned_trap_set_result) |=
+ ((inst & 0x000f0000) | 0x01000000);
+ } else {
+ *((unsigned int *)&unaligned_trap_set_result) |=
+ (inst & 0x7ff0000);
+ }
+ flush_dcache_range((unsigned long)&unaligned_trap_set_result,
+ ((unsigned long)(&unaligned_trap_set_result) + 4));
+
+ asm volatile (
+ /* result uses thread's registers */
+ " move.4 CSR, %1 \n\t"
+ " setcsr_flush 0 \n\t"
+ "unaligned_trap_set_result: \n\t"
+ " move.4 #0, %0 \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ :
+ : "d"(result), "d" ((1 << 14) | (thread << 15))
+ : "cc"
+ );
+ }
+
+ /*
+ * bump PC in thread and restore implicit register changes
+ */
+ asm volatile (
+ " move.4 CSR, %0 \n\t"
+ " setcsr_flush 0 \n\t"
+ " move.4 pc, %1 \n\t"
+ " move.4 acc0_lo, (%3) \n\t"
+ " move.4 acc0_hi, 4(%3) \n\t"
+ " move.4 acc1_lo, 8(%3) \n\t"
+ " move.4 acc1_hi, 12(%3) \n\t"
+ " move.4 mac_rc16, 16(%3) \n\t"
+ " move.4 CSR, %2 \n\t"
+ " setcsr #0 \n\t"
+ " setcsr_flush 0 \n\t"
+ :
+ : "d"((1 << 14) | (thread << 15)),
+ "d"(pc + 4), "d"(save_csr), "a"(save_acc)
+ : "cc"
+ );
+}
+
+/*
+ * unaligned_only()
+ * Return true if either of the unaligned causes are set (and no others).
+ */
+int unaligned_only(unsigned int cause)
+{
+ unsigned int unaligned_cause_mask =
+ (1 << TRAP_CAUSE_DST_MISALIGNED) |
+ (1 << TRAP_CAUSE_SRC1_MISALIGNED);
+
+ BUG_ON(cause == 0);
+ return (cause & unaligned_cause_mask) == cause;
+}
--- /dev/null
+++ b/arch/ubicom32/kernel/vmlinux.lds.S
@@ -0,0 +1,303 @@
+/*
+ * arch/ubicom32/kernel/vmlinux.lds.S
+ * vmlinux primary linker script
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/ocm_size.h>
+#include <asm/thread_info.h>
+#include <linux/threads.h>
+
+/*
+ * Sanity checks to prevent errors later on that are much harder to understand
+ */
+#if !defined APP_OCM_CODE_SIZE
+#error APP_OCM_CODE_SIZE has not been defined in ocm_size.h
+#endif
+
+#if !defined APP_OCM_DATA_SIZE
+#error APP_OCM_DATA_SIZE has not been defined in ocm_size.h
+#endif
+
+/*
+ * XXX Should get these from a common header file, but <asm/ip5000.h> is a mess
+ * and can't be included by anything other than C code at the moment.
+ */
+/*
+ * Memory Size
+ */
+#define OCM_SECTOR_SIZE 0x00008000 /* 32K */
+
+#if defined(CONFIG_UBICOM32_V3)
+#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */
+#elif defined(CONFIG_UBICOM32_V4)
+#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */
+#else
+#error "Unknown IP5K silicon"
+#endif
+
+#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy jump to/from SDRAM */
+#define OCMEND (OCMSTART + OCMSIZE)
+
+/*
+ * The `free' ocm area that ultra does not use.
+ */
+#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE
+#define OCM_FREE_START (OCMSTART + APP_OCM_CODE_SIZE)
+#define OCM_FREE_LENGTH (OCMSIZE - APP_OCM_CODE_SIZE - APP_OCM_DATA_SIZE)
+#else
+#define OCM_FREE_START OCMEND
+#define OCM_FREE_LENGTH 0
+#endif
+/*
+ * If you want to limit OCM use for text/data or completely disable it you can change these values.
+ */
+#define OCM_TEXT_LENGTH OCM_FREE_LENGTH
+#define OCM_DATA_LENGTH OCM_FREE_LENGTH
+
+#define RAM_START CONFIG_KERNELBASE
+#define RAM_LENGTH (CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
+#define TEXT ram
+#define DATA ram
+#define INIT ram
+#define BSS ram
+
+#ifndef DATA_ADDR
+#define DATA_ADDR
+#endif
+
+OUTPUT_ARCH(ubicom32)
+ENTRY(_start)
+
+MEMORY {
+ ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
+ ocm : ORIGIN = OCM_FREE_START, LENGTH = OCM_FREE_LENGTH
+}
+
+jiffies = jiffies_64 + 4;
+
+/*
+ * Fixed locations required by gdb coredumps.
+ *
+ * Note that the names are what gdb is expecting so renaming will break
+ * the toolchain.
+ */
+__ocm_begin = OCMSTART;
+__ocm_limit = __ocm_begin + OCMSIZE;
+__sdram_begin = CONFIG_RAMBASE;
+__sdram_limit = __sdram_begin + CONFIG_RAMSIZE;
+__filemedia_begin_addr = 0x60000000;
+__filemedia_end_addr = __filemedia_begin_addr + 0x00800000;
+
+SECTIONS {
+
+ .fixed_text : {
+ _begin = .;
+ *(.skip_syscall)
+ *(.syscall_entry.text)
+ *(.syscall_exit.text)
+ *(.ret_from_interrupt_to_user.text)
+ *(.ret_from_fork.text)
+ *(.kernel_unprotected)
+ __fixed_text_end = .;
+ } > TEXT
+ . = _begin + SIZEOF(.fixed_text) ;
+
+ __ocm_text_load_begin = .;
+ __ocm_text_run_begin = OCM_FREE_START ;
+ .ocm_text __ocm_text_run_begin : AT(__ocm_text_load_begin) {
+#if OCM_TEXT_LENGTH
+ *(.ocm_text)
+ *(.sched.text)
+ *(.spinlock.text)
+#include <asm/ocm_text.lds.inc>
+ . = ALIGN(4);
+#endif
+ __ocm_text_run_end = .;
+ __data_begin = ALIGN(OCM_SECTOR_SIZE);
+ } > ocm /* .ocm_text */
+
+ .ocm_module_text __ocm_text_run_end (NOLOAD) : AT(__ocm_text_run_end) {
+ __ocm_inst_heap_begin = .;
+ /* Reserve the min requested */
+ . += (CONFIG_OCM_MODULES_RESERVATION) * 1024;
+#ifdef CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE
+ /* Round up to OCM sector size (we cannot use it for data) */
+ . = ALIGN(OCM_SECTOR_SIZE);
+#endif
+ __ocm_inst_heap_end = .;
+ /* update __data_begin */
+ __data_begin = ALIGN(OCM_SECTOR_SIZE);
+ } > ocm /* .ocm_module_text */
+
+ . = __ocm_text_load_begin + __ocm_text_run_end - __ocm_text_run_begin ;
+ __ocm_text_load_end = .;
+
+ __ocm_data_load_begin = .;
+ __ocm_data_run_begin = __data_begin ;
+#if OCM_DATA_LENGTH
+ .ocm_data __ocm_data_run_begin : AT(__ocm_data_load_begin) {
+#if defined(CONFIG_IRQSTACKS_USEOCM)
+ percpu_irq_stacks = .;
+ . += NR_CPUS * THREAD_SIZE;
+#endif
+ *(.ocm_data)
+ . = ALIGN(4) ;
+ __ocm_data_run_end = .;
+ } > ocm
+ . = __ocm_data_load_begin + __ocm_data_run_end - __ocm_data_run_begin ;
+#else
+ __ocm_data_run_end = __ocm_data_run_begin;
+#endif
+ __ocm_data_load_end = .;
+
+ __ocm_free_begin = __ocm_data_run_end;
+ __ocm_free_end = OCM_FREE_START + OCM_FREE_LENGTH;
+
+ .text __ocm_data_load_end : AT(__ocm_data_load_end) {
+ . = ALIGN(4);
+ _stext = .;
+ _text = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.text.lock)
+ *(.text.__libgcc_udivmodsi)
+ *(.text.__libgcc_divmodsi)
+ *(.text.__libgcc_muldi3)
+ *(.text.__libgcc_udivmoddi)
+ *(.text.__libgcc_divmoddi)
+ *(.text.*)
+#if OCM_TEXT_LENGTH == 0
+ *(.ocm_text)
+ *(.sched.text)
+ *(.spinlock.text)
+#endif
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+
+ } > TEXT
+
+ RO_DATA(16)
+
+ .rodata : {} > TEXT
+ .rodata1 : {} > TEXT
+ .pci_fixup : {} > TEXT
+ .builtin_fw : {} > TEXT
+ .rio_route : {} > TEXT
+ .tracedata : {} > TEXT
+ __ksymtab : {} > TEXT
+ __ksymtab_gpl : {} > TEXT
+ __ksymtab_gpl_future : {} > TEXT
+ __kcrctab_gpl : {} > TEXT
+ __kcrctab_unused : {} > TEXT
+ __kcrctab_unused_gpl : {} > TEXT
+ __kcrctab_gpl_future : {} > TEXT
+ __ksymtab_strings : {} > TEXT
+ __init_rodata : {} > TEXT
+ __param : {} > TEXT
+
+ _etext = .;
+
+ .data DATA_ADDR : {
+ . = ALIGN(4);
+ _sdata = . ;
+ DATA_DATA
+#if OCM_DATA_LENGTH == 0
+ *(.ocm_data)
+#endif
+ . = ALIGN(8192) ;
+ _data_protection_end = .;
+ *(.data.init_task)
+ . = ALIGN(4);
+ _edata = . ;
+ } > DATA
+
+ .init : {
+ . = ALIGN(4096);
+ __init_begin = .;
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ *(.init.rodata)
+ INIT_DATA
+ . = ALIGN(16);
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ ___security_initcall_start = .;
+ *(.security_initcall.init)
+ ___security_initcall_end = .;
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(4);
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+#endif
+ . = ALIGN(4096);
+ __per_cpu_start = .;
+ *(.data.percpu)
+ *(.data.percpu.shared_aligned)
+ __per_cpu_end = .;
+
+ . = ALIGN(4096);
+ __init_end = .;
+ } > INIT
+
+ .eh_frame :
+ {
+ PROVIDE (___eh_frame_begin = .);
+ *(.eh_frame)
+ LONG (0);
+ PROVIDE (___eh_frame_end = .);
+ } > INIT
+
+ .bss : {
+ . = ALIGN(4);
+ _sbss = . ;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = . ;
+ _end = . ;
+ } > BSS
+
+ /DISCARD/ : {
+ EXIT_TEXT
+ EXIT_DATA
+ *(.exitcall.exit)
+ }
+
+ NOTES > BSS
+
+}
--- /dev/null
+++ b/arch/ubicom32/lib/checksum.c
@@ -0,0 +1,250 @@
+/*
+ * arch/ubicom32/lib/checksum.c
+ * Optimized checksum utilities for IP.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * IP/TCP/UDP checksumming routines
+ *
+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ * Tom May, <ftom@netcom.com>
+ * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ * Lots of code moved from tcp.c and ip.c; see those files
+ * for more names.
+ *
+ * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
+ * Fixed some nasty bugs, causing some horrible crashes.
+ * A: At some points, the sum (%0) was used as
+ * length-counter instead of the length counter
+ * (%1). Thanks to Roman Hodek for pointing this out.
+ * B: GCC seems to mess up if one uses too many
+ * data-registers to hold input values and one tries to
+ * specify d0 and d1 as scratch registers. Letting gcc choose these
+ * registers itself solves the problem.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
+ of the assembly has to go. */
+
+#include <linux/module.h>
+#include <net/checksum.h>
+
+static unsigned long do_csum(const unsigned char * buff, int len)
+{
+ int count;
+ unsigned long result = 0;
+
+ /*
+ * The following optimized assembly code cannot handle data length less than 7 bytes!
+ */
+ if (likely(len >= 7)) {
+ len -= (4 - (int)buff) & 3;
+ count = len >> 2;
+ asm (
+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
+
+ " bfextu d14, %0, #2 \n\t" // test 2 LSB of buff
+ " jmpne.w.f 100f \n\t"
+ " add.4 %1, #0, %1 \n\t" // clear C
+ " moveai a3, #%%hi(1f) \n\t" // table jump
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+ " calli a3, 0(a3) \n\t"
+
+ "100: sub.4 %0, %0, d14 \n\t"
+ " sub.4 d14, #4, d14 \n\t"
+ " lsl.4 d14, d14, #3 \n\t"
+ " add.4 %1, #0, %1 \n\t" // clear C
+ " moveai a3, #%%hi(1f) \n\t" // table jump
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+ " bfextu %1, (%0)4++, d14 \n\t" // read first partial word
+ " calli a3, 0(a3) \n\t"
+#if 1
+ "200: lsl.4 %3, %3, #3 \n\t"
+ " bfrvrs d15, (%0), #0 \n\t" // read last word (partial)
+ " bfextu d15, d15, %3 \n\t"
+ " bfrvrs d15, d15, #0 \n\t"
+ " add.4 %1, d15, %1 \n\t"
+ " addc %1, #0, %1 \n\t" // sample C again
+ " jmpt.w.t 2f \n\t"
+#else
+ "200: move.1 d15, 0(%0) \n\t"
+ " lsl.4 d15, d15, #8 \n\t"
+ " add.4 %1, d15, %1 \n\t"
+ " addc %1, #0, %1 \n\t" // sample C again
+ " add.4 %3, #-1, %3 \n\t"
+ " jmpeq.w.t 2f \n\t"
+
+ " move.1 d15, 1(%0) \n\t"
+ " add.4 %1, d15, %1 \n\t"
+ " addc %1, #0, %1 \n\t" // sample C again
+ " add.4 %3, #-1, %3 \n\t"
+ " jmpeq.w.t 2f \n\t"
+
+ " move.1 d15, 2(%0) \n\t"
+ " lsl.4 d15, d15, #8 \n\t"
+ " add.4 %1, d15, %1 \n\t"
+ " addc %1, #0, %1 \n\t" // sample C again
+ " jmpt.w.t 2f \n\t"
+#endif
+#if defined(IP7000) || defined(IP7000_REV2)
+ "300: swapb.2 %1, %1 \n\t"
+#else
+ "300: shmrg.2 %1, %1, %1 \n\t"
+ " lsr.4 %1, %1, #8 \n\t"
+ " bfextu %1, %1, #16 \n\t"
+#endif
+ " jmpt.w.t 3f \n\t"
+
+ "1: add.4 %1, (%0)4++, %1 \n\t" // first add without C
+ " .rept 31 \n\t"
+ " addc %1, (%0)4++, %1 \n\t"
+ " .endr \n\t"
+ " addc %1, #0, %1 \n\t" // sample C again
+ " add.4 %2, #-32, %2 \n\t"
+ " jmpgt.w.t 1b \n\t"
+
+ " and.4 %3, #3, %3 \n\t" // check n
+ " jmpne.w.f 200b \n\t"
+
+ "2: .rept 2 \n\t"
+ " lsr.4 d15, %1, #16 \n\t"
+ " bfextu %1, %1, #16 \n\t"
+ " add.4 %1, d15, %1 \n\t"
+ " .endr \n\t"
+ " btst d14, #3 \n\t" // start from odd address (<< 3)?
+ " jmpne.w.f 300b \n\t"
+ "3: \n\t"
+
+ : "+a"(buff), "+d"(result), "+d"(count), "+d"(len)
+ :
+ : "d15", "d14", "a3", "cc"
+ );
+
+ return result;
+ }
+
+ /*
+ * handle a few bytes and fold result into 16-bit
+ */
+ while (len-- > 0) {
+ result += (*buff++ << 8);
+ if (len) {
+ result += *buff++;
+ len--;
+ }
+ }
+ asm (
+ " .rept 2 \n\t"
+ " lsr.4 d15, %0, #16 \n\t"
+ " bfextu %0, %0, #16 \n\t"
+ " add.4 %0, d15, %0 \n\t"
+ " .endr \n\t"
+ : "+d" (result)
+ :
+ : "d15", "cc"
+ );
+
+ return result;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return (__force __sum16)~do_csum(iph,ihl*4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ unsigned int result = do_csum(buff, len);
+
+ /* add in old sum, and carry.. */
+ result += (__force u32)sum;
+ if ((__force u32)sum > result)
+ result += 1;
+ return (__force __wsum)result;
+}
+
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return (__force __sum16)~do_csum(buff,len);
+}
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err)
+{
+ if (csum_err) *csum_err = 0;
+ memcpy(dst, (__force const void *)src, len);
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
--- /dev/null
+++ b/arch/ubicom32/lib/delay.c
@@ -0,0 +1,49 @@
+/*
+ * arch/ubicom32/lib/delay.c
+ * Ubicom32 implementation of udelay()
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <asm/param.h>
+#include <asm/delay.h>
+#include <asm/ip5000.h>
+
+/*
+ * read_current_timer()
+ * Return the current value of sysval.
+ */
+int __devinit read_current_timer(unsigned long *timer_val)
+{
+ *timer_val = (long)(UBICOM32_IO_TIMER->sysval);
+ return 0;
+}
+
+
+void udelay(unsigned long usecs)
+{
+ _udelay(usecs);
+}
+EXPORT_SYMBOL(udelay);
--- /dev/null
+++ b/arch/ubicom32/lib/Makefile
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/lib/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+#
+# Makefile for m68knommu specific library files..
+#
+
+lib-y := checksum.o delay.o mem_ubicom32.o muldi3.o lshrdi3.o ashldi3.o ashrdi3.o divmod.o
--- /dev/null
+++ b/arch/ubicom32/lib/mem_ubicom32.c
@@ -0,0 +1,242 @@
+/*
+ * arch/ubicom32/lib/mem_ubicom32.c
+ * String functions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#define LIKELY likely
+#define UNLIKELY unlikely
+
+typedef u32_t addr_t;
+
+/*
+ * memcpy()
+ */
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ void *dest_ret = dest;
+
+ if (LIKELY((((addr_t)dest ^ (addr_t)src) & 3) == 0) && LIKELY(n > 6)) {
+ size_t m;
+ n -= (4 - (addr_t)dest) & 0x03;
+ m = n >> 2;
+ asm volatile (
+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
+ " moveai a3, #%%hi(1f) \n\t"
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+
+ " bfextu d15, %0, #2 \n\t" // d15 = (dest & 3)
+ " jmpne.w.f 100f \n\t"
+ " calli a3, 0(a3) \n\t" // 4-byte alignment
+
+ "100: cmpi d15, #2 \n\t"
+ " jmpne.s.f 101f \n\t"
+ " move.2 (%0)2++, (%1)2++ \n\t"
+ " calli a3, 0(a3) \n\t" // 2-byte alignment
+
+ "101: move.1 (%0)1++, (%1)1++ \n\t"
+ " jmpgt.s.f 102f \n\t" // 3-byte alignment
+ " move.2 (%0)2++, (%1)2++ \n\t" // 1-byte alignment
+ "102: calli a3, 0(a3) \n\t"
+
+ "200: cmpi %3, #2 \n\t"
+ " jmplt.s.f 201f \n\t"
+ " move.2 (%0)2++, (%1)2++ \n\t"
+ " jmpeq.s.t 2f \n\t"
+ "201: move.1 (%0)1++, (%1)1++ \n\t"
+ " jmpt.w.t 2f \n\t"
+
+ "1: .rept 25 \n\t"
+ " movea (%0)4++, (%1)4++ \n\t"
+ " .endr \n\t"
+ " .rept 7 \n\t"
+ " move.4 (%0)4++, (%1)4++ \n\t"
+ " .endr \n\t"
+ " add.4 %2, #-32, %2 \n\t"
+ " jmpgt.w.f 1b \n\t"
+
+ " and.4 %3, #3, %3 \n\t" // check n
+ " jmpne.w.f 200b \n\t"
+ "2: \n\t"
+ : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
+ :
+ : "d15", "a3", "memory", "cc"
+ );
+
+ return dest_ret;
+ }
+
+ if (LIKELY((((addr_t)dest ^ (addr_t)src) & 1) == 0) && LIKELY(n > 2)) {
+ size_t m;
+ n -= (addr_t)dest & 0x01;
+ m = n >> 1;
+ asm volatile (
+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
+ " moveai a3, #%%hi(1f) \n\t"
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+
+ " btst %0, #0 \n\t" // check bit 0
+ " jmpne.w.f 100f \n\t"
+ " calli a3, 0(a3) \n\t" // 4-byte alignment
+
+ "100: move.1 (%0)1++, (%1)1++ \n\t"
+ " calli a3, 0(a3) \n\t"
+
+ "200: move.1 (%0)1++, (%1)1++ \n\t"
+ " jmpt.w.t 2f \n\t"
+
+ "1: .rept 32 \n\t"
+ " move.2 (%0)2++, (%1)2++ \n\t"
+ " .endr \n\t"
+ " add.4 %2, #-32, %2 \n\t"
+ " jmpgt.w.f 1b \n\t"
+
+ " and.4 %3, #1, %3 \n\t" // check n
+ " jmpne.w.f 200b \n\t"
+ "2: \n\t"
+
+ : "+a" (dest), "+a" (src), "+d" (m), "+d" (n)
+ :
+ : "d15", "a3", "memory", "cc"
+ );
+
+ return dest_ret;
+ }
+
+ asm volatile (
+ " sub.4 d15, #0, %2 \n\t"
+ " jmpeq.w.f 2f \n\t"
+ " and.4 d15, #(16-1), d15 \n\t" // d15 = (-n) & (16 - 1)
+ " moveai a3, #%%hi(1f) \n\t"
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+ " calli a3, 0(a3) \n\t"
+
+ "1: .rept 16 \n\t"
+ " move.1 (%0)1++, (%1)1++ \n\t"
+ " .endr \n\t"
+ " add.4 %2, #-16, %2 \n\t"
+ " jmpgt.w.f 1b \n\t"
+ "2: \n\t"
+
+ : "+a" (dest), "+a" (src), "+d" (n)
+ :
+ : "d15", "a3", "memory", "cc"
+ );
+
+ return dest_ret;
+}
+
+/*
+ * memset()
+ */
+void *memset(void *s, int c, size_t n)
+{
+ void *s_ret = s;
+
+ if (LIKELY(n > 6)) {
+ size_t m;
+ n -= (4 - (addr_t)s) & 0x03;
+ m = n >> 2;
+ asm volatile (
+ " sub.4 d15, #0, %2 \n\t" // set up for jump table
+ " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1)
+ " shmrg.1 %1, %1, %1 \n\t"
+ " shmrg.2 %1, %1, %1 \n\t" // %1 = (c<<24)|(c<<16)|(c<<8)|c
+ " moveai a3, #%%hi(1f) \n\t"
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+
+ " bfextu d15, %0, #2 \n\t" // d15 = (s & 3)
+ " jmpne.w.f 100f \n\t"
+ " calli a3, 0(a3) \n\t" // 4-byte alignment
+
+ "100: cmpi d15, #2 \n\t"
+ " jmpne.s.f 101f \n\t"
+ " move.2 (%0)2++, %1 \n\t"
+ " calli a3, 0(a3) \n\t" // 2-byte alignment
+
+ "101: move.1 (%0)1++, %1 \n\t"
+ " jmpgt.s.f 102f \n\t" // 3-byte alignment
+ " move.2 (%0)2++, %1 \n\t" // 1-byte alignment
+ "102: calli a3, 0(a3) \n\t"
+
+ "200: cmpi %3, #2 \n\t"
+ " jmplt.s.f 201f \n\t"
+ " move.2 (%0)2++, %1 \n\t"
+ " jmpeq.s.t 2f \n\t"
+ "201: move.1 (%0)1++, %1 \n\t"
+ " jmpt.w.t 2f \n\t"
+
+ "1: .rept 25 \n\t"
+ " movea (%0)4++, %1 \n\t"
+ " .endr \n\t"
+ " .rept 7 \n\t"
+ " move.4 (%0)4++, %1 \n\t"
+ " .endr \n\t"
+ " add.4 %2, #-32, %2 \n\t"
+ " jmpgt.w.f 1b \n\t"
+
+ " and.4 %3, #3, %3 \n\t" // test bit 1 of n
+ " jmpne.w.f 200b \n\t"
+ "2: \n\t"
+
+ : "+a" (s), "+d" (c), "+d" (m), "+d" (n)
+ :
+ : "d15", "a3", "memory", "cc"
+ );
+
+ return s_ret;
+ }
+
+ asm volatile (
+ " sub.4 d15, #0, %2 \n\t"
+ " jmpeq.w.f 2f \n\t"
+ " and.4 d15, #(8-1), d15 \n\t" // d15 = (-%2) & (16 - 1)
+ " moveai a3, #%%hi(1f) \n\t"
+ " lea.1 a3, %%lo(1f)(a3) \n\t"
+ " lea.4 a3, (a3,d15) \n\t"
+ " calli a3, 0(a3) \n\t"
+
+ "1: .rept 8 \n\t"
+ " move.1 (%0)1++, %1 \n\t"
+ " .endr \n\t"
+ "2: \n\t"
+
+ : "+a" (s), "+d" (c), "+d" (n)
+ :
+ : "d15", "a3", "memory", "cc"
+ );
+
+ return s_ret;
+}
--- /dev/null
+++ b/arch/ubicom32/mach-common/audio_tio.c
@@ -0,0 +1,115 @@
+/*
+ * arch/ubicom32/mach-common/audio_tio.c
+ * Generic initialization for Ubicom32 Audio
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/devtree.h>
+#include <asm/audio_tio.h>
+#include <asm/ubi32-pcm.h>
+
+/*
+ * The number of audio_tio's currently allocated, used for .id
+ */
+static int __initdata audio_tio_count;
+
+/*
+ * The maximum number of resources that the audio_tio will have.
+ * Currently 3, a register space, and up to 2 interrupts.
+ */
+#define AUDIO_TIO_MAX_RESOURCES 3
+
+/*
+ * audio_tio_alloc
+ * Checks the device tree and allocates a platform_device if found
+ */
+struct platform_device * __init audio_tio_alloc(const char *driver_name,
+ const char *node_name, int priv_bytes)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ struct audiotionode *audio_node;
+ struct ubi32pcm_platform_data *pdata;
+
+ /*
+ * Check the device tree for the audio_tio
+ */
+ audio_node = (struct audiotionode *)devtree_find_node(node_name);
+ if (!audio_node) {
+ printk(KERN_WARNING "audio TIO '%s' found\n", node_name);
+ return NULL;
+ }
+
+ if (audio_node->version != AUDIOTIONODE_VERSION) {
+ printk(KERN_WARNING "audio_tio not compatible\n");
+ return NULL;
+ }
+
+ /*
+ * Dynamically create the platform_device structure and resources
+ */
+ pdev = kzalloc(sizeof(struct platform_device) +
+ sizeof(struct ubi32pcm_platform_data) +
+ priv_bytes , GFP_KERNEL);
+ if (!pdev) {
+ printk(KERN_WARNING "audio_tio could not alloc pdev\n");
+ return NULL;
+ }
+
+ res = kzalloc(sizeof(struct resource) * AUDIO_TIO_MAX_RESOURCES,
+ GFP_KERNEL);
+ if (!res) {
+ kfree(pdev);
+ printk(KERN_WARNING "audio_tio could not alloc res\n");
+ return NULL;
+ }
+
+ pdev->name = driver_name;
+ pdev->id = audio_tio_count++;
+ pdev->resource = res;
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ res[0].start = (u32_t)(audio_node->regs);
+ res[0].end = (u32_t)(audio_node->regs);
+ res[0].flags = IORESOURCE_MEM;
+ res[1 + AUDIOTIO_TX_IRQ_RESOURCE].start = audio_node->dn.sendirq;
+ res[1 + AUDIOTIO_TX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
+ res[1 + AUDIOTIO_RX_IRQ_RESOURCE].start = audio_node->dn.recvirq;
+ res[1 + AUDIOTIO_RX_IRQ_RESOURCE].flags = IORESOURCE_IRQ;
+ pdev->num_resources = 3;
+
+ printk(KERN_INFO "AudioTIO.%d '%s' found irq=%d/%d regs=%p pdev=%p/%p\n",
+ audio_tio_count - 1, node_name, audio_node->dn.sendirq,
+ audio_node->dn.recvirq, audio_node->regs, pdev, res);
+ pdata = (struct ubi32pcm_platform_data *)(pdev + 1);
+ pdev->dev.platform_data = pdata;
+ pdata->node_name = node_name;
+ if (priv_bytes) {
+ pdata->priv_data = pdata + 1;
+ }
+
+ return pdev;
+}
+
--- /dev/null
+++ b/arch/ubicom32/mach-common/board.c
@@ -0,0 +1,63 @@
+/*
+ * arch/ubicom32/mach-common/board.c
+ * Board init and support code.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/cpu.h>
+#include <asm/devtree.h>
+
+struct boardnode {
+ struct devtree_node dn;
+ const char *revision;
+};
+
+static const struct boardnode *bn;
+
+/*
+ * board_get_revision()
+ * Returns revision string of the board.
+ */
+const char *board_get_revision(void)
+{
+ if (!bn) {
+ return "NULL";
+ }
+
+ return bn->revision;
+}
+
+/*
+ * board_init
+ */
+void __init board_init(void)
+{
+ bn = (struct boardnode *)devtree_find_node("board");
+ if (!bn) {
+ printk(KERN_WARNING "board node not found\n");
+ return;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/mach-common/bootargs.c
@@ -0,0 +1,63 @@
+/*
+ * arch/ubicom32/mach-common/bootargs.c
+ * Board init and support code.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/cpu.h>
+#include <asm/devtree.h>
+
+struct bootargsnode {
+ struct devtree_node dn;
+ const char cmdline[512];
+};
+
+static const struct bootargsnode *ban;
+
+/*
+ * bootargs_get_cmdline()
+ * Returns kernel boot arguments set by the bootloader.
+ */
+const char *bootargs_get_cmdline(void)
+{
+ if (!ban) {
+ return "";
+ }
+
+ return ban->cmdline;
+}
+
+/*
+ * bootargs_init
+ */
+void __init bootargs_init(void)
+{
+ ban = (struct bootargsnode *)devtree_find_node("bootargs");
+ if (!ban) {
+ printk(KERN_WARNING "bootargs node not found\n");
+ return;
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/mach-common/cachectl.c
@@ -0,0 +1,125 @@
+/*
+ * arch/ubicom32/mach-common/cachectl.c
+ * Architecture cache control support
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <asm/cachectl.h>
+
+/*
+ * The write queue flush procedure in mem_cache_control needs to make
+ * DCACHE_WRITE_QUEUE_LENGTH writes to DDR (not OCM). Here we reserve some
+ * memory for this operation.
+ * Allocate array of cache lines of least DCACHE_WRITE_QUEUE_LENGTH + 1 words in
+ * length rounded up to the nearest cache line.
+ */
+#define CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE \
+ ALIGN(sizeof(int) * (DCACHE_WRITE_QUEUE_LENGTH + 1), CACHE_LINE_SIZE)
+
+static char cache_write_queue_flush_area[CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE]
+ __attribute__((aligned(CACHE_LINE_SIZE)));
+
+/*
+ * ONE_CCR_ADDR_OP is a helper macro that executes a single CCR operation.
+ */
+#define ONE_CCR_ADDR_OP(cc, op_addr, op) \
+ do { \
+ asm volatile ( \
+ " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
+ " jmpne.f .-4 \n\t" \
+ " move.4 "D(CCR_ADDR)"(%0), %1 \n\t" \
+ " move.1 "D(CCR_CTRL+3)"(%0), %2 \n\t" \
+ " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \
+ " cycles 2 \n\t" \
+ " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_DONE)" \n\t" \
+ " jmpeq.f .-4 \n\t" \
+ : \
+ : "a"(cc), "r"(op_addr), "r"(op & 0xff) \
+ : "cc" \
+ ); \
+ } while (0)
+
+/*
+ * mem_cache_control()
+ * Special cache control operation
+ */
+void mem_cache_control(unsigned long cc, unsigned long begin_addr,
+ unsigned long end_addr, unsigned long op)
+{
+ unsigned long op_addr;
+
+ if (cc == DCCR_BASE && op == CCR_CTRL_FLUSH_ADDR) {
+ /*
+ * We ensure all previous writes have left the data cache write
+ * queue by sending DCACHE_WRITE_QUEUE_LENGTH writes (to
+ * different words) down the queue. If this is not done it's
+ * possible that the data we are trying to flush hasn't even
+ * entered the data cache.
+ * The +1 ensure that the final 'flush' is actually a flush.
+ */
+ int *flush_area = (int *)cache_write_queue_flush_area;
+ asm volatile(
+ " .rept "D(DCACHE_WRITE_QUEUE_LENGTH + 1)" \n\t"
+ " move.4 (%0)4++, d0 \n\t"
+ " .endr \n\t"
+ : "+a"(flush_area)
+ );
+ }
+
+ /*
+ * Calculate the cache lines we need to operate on that include
+ * begin_addr though end_addr.
+ */
+ begin_addr = begin_addr & ~(CACHE_LINE_SIZE - 1);
+ end_addr = (end_addr + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+ op_addr = begin_addr;
+
+ do {
+ ONE_CCR_ADDR_OP(cc, op_addr, op);
+ op_addr += CACHE_LINE_SIZE;
+ } while (likely(op_addr < end_addr));
+
+ if (cc == DCCR_BASE && op == CCR_CTRL_FLUSH_ADDR) {
+ /*
+ * It turns out that when flushing the data cache the last flush
+ * isn't actually complete at this point. This is because there
+ * is another write buffer on the DDR side of the cache that is
+ * arbitrated with the I-Cache.
+ *
+ * The only foolproof method that ensures that the last data
+ * cache flush *actually* completed is to do another flush on a
+ * dirty cache line. This flush will block until the DDR write
+ * buffer is empty.
+ *
+ * Rather than creating a another dirty cache line, we use the
+ * flush_area above as we know that it is dirty from previous
+ * writes.
+ */
+ ONE_CCR_ADDR_OP(cc, cache_write_queue_flush_area, op);
+ }
+}
+EXPORT_SYMBOL(mem_cache_control);
--- /dev/null
+++ b/arch/ubicom32/mach-common/common.c
@@ -0,0 +1,64 @@
+/*
+ * arch/ubicom32/mach-common/common.c
+ * Common platform support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
--- /dev/null
+++ b/arch/ubicom32/mach-common/io.c
@@ -0,0 +1,250 @@
+/*
+ * arch/ubicom32/mach-common/io.c
+ * PCI I/O memory read/write support functions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_PCI
+unsigned char ioread8(void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u8(addr);
+ else
+ return (unsigned char)(*(volatile unsigned char *)addr);
+}
+EXPORT_SYMBOL(ioread8);
+
+unsigned short ioread16(void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u16(addr);
+ else
+ return (unsigned short)(*(volatile unsigned short *)addr);
+}
+EXPORT_SYMBOL(ioread16);
+
+unsigned int ioread32(void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ return ubi32_pci_read_u32(addr);
+ else
+ return (unsigned int)(*(volatile unsigned int *)addr);
+}
+EXPORT_SYMBOL(ioread32);
+
+void iowrite32(unsigned int val, void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u32(val, addr);
+ else
+ *(volatile unsigned int *)addr = val;
+}
+EXPORT_SYMBOL(iowrite32);
+
+void iowrite16(unsigned short val, void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u16(val, addr);
+ else
+ *(volatile unsigned short *)addr = val;
+}
+EXPORT_SYMBOL(iowrite16);
+
+void iowrite8(unsigned char val, void __iomem *addr)
+{
+ if (IS_PCI_ADDRESS(addr))
+ ubi32_pci_write_u8(val, addr);
+ else
+ *(volatile unsigned char *)addr = val;
+}
+EXPORT_SYMBOL(iowrite8);
+
+void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
+{
+ if (IS_PCI_ADDRESS(from)) {
+ if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
+ while ((int)len >= 4) {
+ *(u32_t *)to = ubi32_pci_read_u32(from);
+ to += 4;
+ from += 4;
+ len -= 4;
+ }
+ } else if ((((u32_t)from & 0x1) == 0) &&
+ (((u32_t)to & 0x1) == 0)) {
+ while ((int)len >= 2) {
+ *(u16_t *)to = ubi32_pci_read_u16(from);
+ to += 2;
+ from += 2;
+ len -= 2;
+ }
+ }
+
+ while (len) {
+ *(u8_t *)to = ubi32_pci_read_u8(from);
+ to++;
+ from++;
+ len--;
+ }
+ } else
+ memcpy(to, (void *)from, len);
+}
+EXPORT_SYMBOL(memcpy_fromio);
+
+void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
+{
+ if (IS_PCI_ADDRESS(to)) {
+ if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) {
+ while ((int)len >= 4) {
+ ubi32_pci_write_u32(*(u32_t *)from, to);
+ to += 4;
+ from += 4;
+ len -= 4;
+ }
+ } else if ((((u32_t)from & 0x1) == 0) &&
+ (((u32_t)to & 0x1) == 0)) {
+ while ((int)len >= 2) {
+ ubi32_pci_write_u16(*(u16_t *)from, to);
+ to += 2;
+ from += 2;
+ len -= 2;
+ }
+ }
+
+ while (len) {
+ ubi32_pci_write_u8(*(u8_t *)from, to);
+ from++;
+ to++;
+ len--;
+ }
+ } else
+ memcpy((void *)to, from, len);
+
+}
+EXPORT_SYMBOL(memcpy_toio);
+
+void memset_io(volatile void __iomem *addr, int val, size_t len)
+{
+ if (IS_PCI_ADDRESS(addr)) {
+ while (len) {
+ ubi32_pci_write_u8((unsigned char)val, addr);
+ addr++;
+ len--;
+ }
+ } else
+ memset((void *)addr, val, len);
+
+}
+EXPORT_SYMBOL(memset_io);
+
+void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ *(u8_t *)buf = ioread8(port);
+ buf++;
+ count--;
+ }
+ } else {
+ insb((unsigned int)port, buf, count);
+ }
+
+}
+EXPORT_SYMBOL(ioread8_rep);
+
+void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ *(u16_t *)buf = ioread16(port);
+ buf += 2;
+ count--;
+ }
+ } else {
+ insw((unsigned int)port, buf, count);
+ }
+}
+EXPORT_SYMBOL(ioread16_rep);
+
+void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ *(u32_t *)buf = ioread32(port);
+ buf += 4;
+ count--;
+ }
+ } else {
+ insl((unsigned int)port, buf, count);
+ }
+}
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ iowrite8(*(u8_t *)buf, port);
+ buf++;
+ count--;
+ }
+ } else {
+ outsb((unsigned int)port, buf, count);
+ }
+
+}
+EXPORT_SYMBOL(iowrite8_rep);
+
+void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ iowrite16(*(u16_t *)buf, port);
+ buf += 2;
+ count--;
+ }
+ } else {
+ outsw((unsigned int)port, buf, count);
+ }
+}
+EXPORT_SYMBOL(iowrite16_rep);
+
+void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+ if (IS_PCI_ADDRESS(port)) {
+ while (count) {
+ iowrite32(*(u32_t *)buf, port);
+ buf += 4;
+ count--;
+ }
+ } else {
+ outsl((unsigned int)port, buf, count);
+ }
+}
+EXPORT_SYMBOL(iowrite32_rep);
+
+#endif /* CONFIG_PCI */
--- /dev/null
+++ b/arch/ubicom32/mach-common/Makefile
@@ -0,0 +1,38 @@
+#
+# arch/ubicom32/mach-common/Makefile
+# Makefile for Ubicom32 generic drivers/code.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-y += cachectl.o common.o usb_tio.o usb.o ubi32-gpio.o board.o bootargs.o
+obj-$(CONFIG_PCI) += pci.o io.o
+
+obj-$(CONFIG_FB_UBICOM32) += vdc_tio.o
+obj-$(CONFIG_UBICOM_HID) += ubicom32hid.o
+obj-$(CONFIG_UBICOM_INPUT) += ubicom32input.o
+obj-$(CONFIG_UBICOM_INPUT_I2C) += ubicom32input_i2c.o
+obj-$(CONFIG_UIO_UBICOM32RING) += ring_tio.o
+obj-$(CONFIG_SND_UBI32) += audio_tio.o
+
--- /dev/null
+++ b/arch/ubicom32/mach-common/pci.c
@@ -0,0 +1,1157 @@
+/*
+ * arch/ubicom32/mach-common/pci.c
+ * PCI interface management.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+
+#include <asm/devtree.h>
+#include <asm/ip5000.h>
+#include <asm/ubicom32-common.h>
+
+static int debug_pci = 1 ;
+
+/* #define PCI_USE_INTERNAL_LOCK 1 */
+
+#ifdef PCI_USE_INTERNAL_LOCK
+#define PCI_LOCK(lock, irqflag) pci_lock_acquire(irqflag)
+#define PCI_UNLOCK(lock, irqflag) pci_lock_release(irqflag)
+#elif defined(CONFIG_SMP)
+static DEFINE_SPINLOCK(pci_master_lock);
+#define PCI_LOCK(lock, irqflag) spin_lock_irqsave(lock, irqflag)
+#define PCI_UNLOCK(lock, irqflag) spin_unlock_irqrestore(lock, irqflag)
+#else
+#define PCI_LOCK(lock, irqflag) local_irq_save(irqflag)
+#define PCI_UNLOCK(lock, irqflag) local_irq_restore(irqflag)
+#endif
+
+#define PCI_DEV0_IDSEL CONFIG_PCI_DEV0_IDSEL
+#define PCI_DEV1_IDSEL CONFIG_PCI_DEV1_IDSEL
+
+/*
+ * PCI commands
+ */
+#define PCI_CMD_INT_ACK 0x00 /* not supported */
+#define PCI_CMD_SPECIAL 0x01 /* not supported */
+#define PCI_CMD_IO_READ 0x02
+#define PCI_CMD_IO_WRITE 0x03
+#define PCI_CMD_MEM_READ 0x06
+#define PCI_CMD_MEM_WRITE 0x07
+#define PCI_CMD_CFG_READ 0x0a
+#define PCI_CMD_CFG_WRITE 0x0b
+#define PCI_CMD_MEM_READ_MULT 0x0c /* not supported */
+#define PCI_CMD_DUAL_ADDR 0x0d /* not supported */
+#define PCI_CMD_MEM_READ_LINE 0x0e /* not supported */
+#define PCI_CMD_MEM_WRITE_INVAL 0x0f /* not supported */
+/*
+ * Status codes, returned by pci_read_u32() and pci_write_u32()
+ */
+#define PCI_RESP_IN_PROGRESS 0xff /* request still in queue */
+#define PCI_RESP_OK 0
+/*
+ * The following codes indicate that the request has completed
+ */
+#define PCI_RESP_NO_DEVSEL 1 /* timeout before target asserted
+ * DEVSEL! */
+#define PCI_RESP_LOST_DEVSEL 2 /* had DEVSEL, but went away before
+ * transfer completed! */
+#define PCI_RESP_BAD_TRDY 3 /* target asserted TRDY without
+ * DEVSEL! */
+#define PCI_RESP_NO_TRDY 4 /* timeout before target asserted
+ * TRDY! */
+#define PCI_RESP_BAD_STOP 5 /* target asserted STOP and TRDY
+ * without DEVSEL! */
+#define PCI_RESP_TARGET_ABORT 6
+#define PCI_RESP_TARGET_RETRY 7
+#define PCI_RESP_TARGET_DISCONNECT 8
+#define PCI_RESP_MISMATCH 9 /* data read back doesn't match data
+ * written - debug only, the core PCI
+ * routines never return this */
+#define PCI_RESP_DET_SERR 10
+#define PCI_RESP_DET_PERR 11
+#define PCI_RESP_MALFORMED_REQ 12 /* Could be due to misaligned
+ * requests or invalid address */
+#define PCI_RESP_NO_RESOURCE 13 /* Could be memory or other resourse
+ * like queue space */
+#define PCI_RESP_ERROR 14 /* All emcompassing error */
+
+/* registers in PCI config space */
+#define PCI_DEVICE_VENDOR_ID_REG 0x00
+#define PCI_STATUS_COMMAND_REG 0x04
+#define PCI_CLASS_REVISION_REG 0x08
+#define PCI_BHLC_REG 0x0c /* BIST, Header type, Latency
+ * timer, Cache line size */
+#define PCI_BASE_ADDR_REG 0x10
+#define PCI_BASE_REG_COUNT 6
+#define CARDBUS_CIS_PTR_REG 0x28
+#define PCI_SUB_SYSTEM_ID_REG 0x2c
+#define PCI_EXP_ROM_ADDR_REG 0x30
+#define PCI_CAP_PTR_REG 0x34
+#define PCI_LGPL_REG 0x3C /* max Latency, min Gnt, interrupt
+ * Pin, interrupt Line */
+
+struct pci_master_request {
+ volatile u32_t pci_address; /* must be 4-byte aligned */
+ volatile u32_t data; /* must be 4-byte aligned */
+ volatile u8_t cmd;
+ volatile u8_t byte_valid;
+ volatile u8_t status;
+};
+
+struct pci_devnode {
+ struct devtree_node dn;
+ u32_t pci_idsel_0;
+ u32_t pci_idsel_1;
+ u32_t pci_cpu_address;
+ struct pci_master_request volatile *volatile req;
+};
+
+static struct pci_master_request req; /* globally used for faster master write
+ * (discarding result when possible) */
+static struct pci_devnode *pci_node;
+
+#if !defined(CONFIG_DEBUG_PCIMEASURE)
+#define PCI_DECLARE_MEASUREMENT
+#define PCI_MEASUREMENT_START()
+#define PCI_MEASUREMENT_END(idx)
+#else
+#define PCI_DECLARE_MEASUREMENT \
+ int __diff; \
+ unsigned int __tstart;
+
+#define PCI_MEASUREMENT_START() \
+ __tstart = UBICOM32_IO_TIMER->sysval;
+
+#define PCI_MEASUREMENT_END(idx) \
+ __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \
+ pci_measurement_update((idx), __diff);
+
+#define PCI_WEIGHT 32
+
+struct pci_measurement {
+ volatile unsigned int min;
+ volatile unsigned int avg;
+ volatile unsigned int max;
+};
+
+enum pci_measurement_list {
+ PCI_MEASUREMENT_READ32,
+ PCI_MEASUREMENT_WRITE32,
+ PCI_MEASUREMENT_READ16,
+ PCI_MEASUREMENT_WRITE16,
+ PCI_MEASUREMENT_READ8,
+ PCI_MEASUREMENT_WRITE8,
+ PCI_MEASUREMENT_LAST,
+};
+
+static const char *pci_measurement_name_list[PCI_MEASUREMENT_LAST] = {
+ "READ32",
+ "WRITE32",
+ "READ16",
+ "WRITE16",
+ "READ8",
+ "WRITE8"
+};
+static struct pci_measurement pci_measurements[PCI_MEASUREMENT_LAST];
+
+/*
+ * pci_measurement_update()
+ * Update an entry in the measurement array for this idx.
+ */
+static void pci_measurement_update(int idx, int sample)
+{
+ struct pci_measurement *pm = &pci_measurements[idx];
+ if ((pm->min == 0) || (pm->min > sample)) {
+ pm->min = sample;
+ }
+ if (pm->max < sample) {
+ pm->max = sample;
+ }
+ pm->avg = ((pm->avg * (PCI_WEIGHT - 1)) + sample) / PCI_WEIGHT;
+}
+#endif
+
+#if defined(PCI_USE_INTERNAL_LOCK)
+/*
+ * pci_lock_release()
+ * Release the PCI lock.
+ */
+static void pci_lock_release(unsigned long irqflag)
+{
+ UBICOM32_UNLOCK(PCI_LOCK_BIT);
+}
+
+/*
+ * pci_lock_acquire()
+ * Acquire the PCI lock, spin if not available.
+ */
+static void pci_lock_acquire(unsigned long irqflag)
+{
+ UBICOM32_LOCK(PCI_LOCK_BIT);
+}
+#endif
+
+/*
+ * pci_set_hrt_interrupt()
+ */
+static inline void pci_set_hrt_interrupt(struct pci_devnode *pci_node)
+{
+ ubicom32_set_interrupt(pci_node->dn.sendirq);
+}
+
+/*
+ * pci_read_u32()
+ * Synchronously read 32 bits from PCI space.
+ */
+u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data)
+{
+ u8 status;
+ unsigned long irqflag;
+
+
+ /*
+ * Fill in the request.
+ */
+ volatile struct pci_master_request lreq;
+ PCI_DECLARE_MEASUREMENT;
+
+ lreq.pci_address = address;
+ lreq.cmd = pci_cmd;
+ lreq.byte_valid = 0xf; /* enable all bytes */
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ pci_node->req = &lreq;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+
+ /*
+ * Wait for the result to show up.
+ */
+ while (unlikely(pci_node->req == &lreq))
+ ;
+ status = lreq.status;
+ if (likely(status == PCI_RESP_OK))
+ *data = le32_to_cpu(lreq.data);
+ else
+ *data = 0;
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ32);
+ return status;
+}
+
+/*
+ * pci_write_u32()
+ * Asyncrhnously or synchronously write 32 bits to PCI master space.
+ */
+u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data)
+{
+ unsigned long irqflag;
+ PCI_DECLARE_MEASUREMENT;
+
+ /*
+ * Wait for any previous write or pending read to complete.
+ *
+ * We use a global data block because once we write the request
+ * we do not wait for it to complete before exiting.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ req.pci_address = address;
+ req.data = cpu_to_le32(data);
+ req.cmd = pci_cmd;
+ req.byte_valid = 0xf; /* enable all bytes */
+ pci_node->req = &req;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE32);
+ return PCI_RESP_OK;
+}
+
+/*
+ * pci_read_u16()
+ * Synchronously read 16 bits from PCI space.
+ */
+u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data)
+{
+ u8 status;
+ unsigned long irqflag;
+
+ /*
+ * Fill in the request.
+ */
+ volatile struct pci_master_request lreq;
+ PCI_DECLARE_MEASUREMENT;
+
+ lreq.pci_address = address & ~2;
+ lreq.cmd = pci_cmd;
+ lreq.byte_valid = (address & 2) ? 0xc : 0x3;
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ pci_node->req = &lreq;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+
+ /*
+ * Wait for the result to show up.
+ */
+ while (unlikely(pci_node->req == &lreq))
+ ;
+ status = lreq.status;
+ if (likely(status == PCI_RESP_OK)) {
+ lreq.data = le32_to_cpu(lreq.data);
+ *data = (u16)((address & 2) ? (lreq.data >> 16) : lreq.data);
+ } else
+ *data = 0;
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ16);
+ return status;
+}
+
+/*
+ * pci_write_u16()
+ * Asyncrhnously or synchronously write 16 bits to PCI master space.
+ */
+u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data)
+{
+ unsigned long irqflag;
+ PCI_DECLARE_MEASUREMENT;
+
+ /*
+ * Wait for any previous write or pending read to complete.
+ *
+ * We use a global data block because once we write the request
+ * we do not wait for it to complete before exiting.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ req.pci_address = address & ~2;
+ req.data = (u32)data;
+ req.data = cpu_to_le32((address & 2) ? (req.data << 16) : req.data);
+ req.cmd = pci_cmd;
+ req.byte_valid = (address & 2) ? 0xc : 0x3;
+ pci_node->req = &req;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE16);
+ return PCI_RESP_OK;
+}
+
+/*
+ * pci_read_u8()
+ * Synchronously read 8 bits from PCI space.
+ */
+u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data)
+{
+ u8 status;
+ unsigned long irqflag;
+
+ /*
+ * Fill in the request.
+ */
+ volatile struct pci_master_request lreq;
+ PCI_DECLARE_MEASUREMENT;
+
+ lreq.pci_address = address & ~3;
+ lreq.cmd = pci_cmd;
+ lreq.byte_valid = 1 << (address & 0x3);
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ pci_node->req = &lreq;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+
+ /*
+ * Wait for the result to show up.
+ */
+ while (unlikely(pci_node->req == &lreq))
+ ;
+ status = lreq.status;
+ if (likely(status == PCI_RESP_OK)) {
+ *data = (u8)(lreq.data >> (24 - ((address & 0x3) << 3)));
+ } else
+ *data = 0;
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ8);
+ return status;
+}
+
+/*
+ * pci_write_u8()
+ * Asyncrhnously or synchronously write 8 bits to PCI master space.
+ */
+u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data)
+{
+ unsigned long irqflag;
+ PCI_DECLARE_MEASUREMENT;
+
+ /*
+ * Wait for any previous write or pending read to complete.
+ *
+ * We use a global data block because once we write the request
+ * we do not wait for it to complete before exiting.
+ */
+ PCI_MEASUREMENT_START();
+ PCI_LOCK(&pci_master_lock, irqflag);
+ while (unlikely(pci_node->req == &req))
+ ;
+ req.pci_address = address & ~3;
+ req.data = ((u32)data << (24 - ((address & 0x3) << 3)));
+ req.cmd = pci_cmd;
+ req.byte_valid = 1 << (address & 0x3);
+ pci_node->req = &req;
+ pci_set_hrt_interrupt(pci_node);
+ PCI_UNLOCK(&pci_master_lock, irqflag);
+ PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE8);
+ return PCI_RESP_OK;
+}
+
+unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr)
+{
+ unsigned int data;
+ pci_read_u32(PCI_CMD_MEM_READ, (u32)addr, &data);
+ return data;
+}
+EXPORT_SYMBOL(ubi32_pci_read_u32);
+
+unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr)
+{
+ unsigned short data;
+ pci_read_u16(PCI_CMD_MEM_READ, (u32)addr, &data);
+ return data;
+}
+EXPORT_SYMBOL(ubi32_pci_read_u16);
+
+unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr)
+{
+ unsigned char data;
+ pci_read_u8(PCI_CMD_MEM_READ, (u32)addr, &data);
+ return data;
+}
+EXPORT_SYMBOL(ubi32_pci_read_u8);
+
+void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr)
+{
+ pci_write_u32(PCI_CMD_MEM_WRITE, (u32)addr, val);
+}
+EXPORT_SYMBOL(ubi32_pci_write_u32);
+
+void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr)
+{
+ pci_write_u16(PCI_CMD_MEM_WRITE, (u32)addr, val);
+}
+EXPORT_SYMBOL(ubi32_pci_write_u16);
+
+void ubi32_pci_write_u8(unsigned char val, const void volatile __iomem *addr)
+{
+ pci_write_u8(PCI_CMD_MEM_WRITE, (u32)addr, val);
+}
+EXPORT_SYMBOL(ubi32_pci_write_u8);
+
+#if defined(CONFIG_DEBUG_PCIMEASURE)
+static unsigned int pci_cycles_to_nano(unsigned int cycles, unsigned int frequency)
+{
+ unsigned int nano = ((cycles * 1000) / (frequency / 1000000));
+ return nano;
+}
+
+/*
+ * pci_measurement_show()
+ * Print out the min, avg, max values for each PCI transaction type.
+ *
+ * By request, the max value is reset after each dump.
+ */
+static int pci_measurement_show(struct seq_file *p, void *v)
+{
+ unsigned int min, avg, max;
+ unsigned int freq = processor_frequency();
+ int trans = *((loff_t *) v);
+
+ if (trans == 0) {
+ seq_puts(p, "min\tavg\tmax\t(nano-seconds)\n");
+ }
+
+ if (trans >= PCI_MEASUREMENT_LAST) {
+ return 0;
+ }
+
+ min = pci_cycles_to_nano(pci_measurements[trans].min, freq);
+ avg = pci_cycles_to_nano(pci_measurements[trans].avg, freq);
+ max = pci_cycles_to_nano(pci_measurements[trans].max, freq);
+ pci_measurements[trans].max = 0;
+ seq_printf(p, "%u\t%u\t%u\t%s\n", min, avg, max, pci_measurement_name_list[trans]);
+ return 0;
+}
+
+static void *pci_measurement_start(struct seq_file *f, loff_t *pos)
+{
+ return (*pos < PCI_MEASUREMENT_LAST) ? pos : NULL;
+}
+
+static void *pci_measurement_next(struct seq_file *f, void *v, loff_t *pos)
+{
+ (*pos)++;
+ if (*pos >= PCI_MEASUREMENT_LAST)
+ return NULL;
+ return pos;
+}
+
+static void pci_measurement_stop(struct seq_file *f, void *v)
+{
+ /* Nothing to do */
+}
+
+static const struct seq_operations pci_measurement_seq_ops = {
+ .start = pci_measurement_start,
+ .next = pci_measurement_next,
+ .stop = pci_measurement_stop,
+ .show = pci_measurement_show,
+};
+
+static int pci_measurement_open(struct inode *inode, struct file *filp)
+{
+ return seq_open(filp, &pci_measurement_seq_ops);
+}
+
+static const struct file_operations pci_measurement_fops = {
+ .open = pci_measurement_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init pci_measurement_init(void)
+{
+ proc_create("pci_measurements", 0, NULL, &pci_measurement_fops);
+ return 0;
+}
+module_init(pci_measurement_init);
+#endif
+
+static int ubi32_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ u8 cmd;
+ u32 addr;
+ u8 data8;
+ u16 data16;
+
+ u8 slot = PCI_SLOT(devfn);
+ u8 fn = PCI_FUNC(devfn);
+
+ if (slot > 1) {
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ } else if (slot == 0) {
+ addr = PCI_DEV0_IDSEL + where;
+ } else {
+ addr = PCI_DEV1_IDSEL + where;
+ }
+
+ addr += (fn << 8);
+
+ cmd = PCI_CMD_CFG_READ;
+ if (size == 1) {
+ pci_read_u8(cmd, addr, &data8);
+ *value = (u32)data8;
+ } else if (size == 2) {
+ pci_read_u16(cmd, addr, &data16);
+ *value = (u32)data16;
+ } else {
+ pci_read_u32(cmd, addr, value);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ubi32_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ u8 cmd;
+ u32 addr;
+ u8 slot = PCI_SLOT(devfn);
+ u8 fn = PCI_FUNC(devfn);
+
+ if (slot > 1) {
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ } else if (slot == 0) {
+ addr = PCI_DEV0_IDSEL + where;
+ } else {
+ addr = PCI_DEV1_IDSEL + where;
+ }
+
+ addr += (fn << 8);
+
+ cmd = PCI_CMD_CFG_WRITE;
+ if (size == 1) {
+ pci_write_u8(cmd, addr, (u8)value);
+ } else if (size == 2) {
+ pci_write_u16(cmd, addr, (u16)value);
+ } else {
+ pci_write_u32(cmd, addr, value);
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(pci_set_dma_max_seg_size);
+
+int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(pci_set_dma_seg_boundary);
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ resource_size_t start = pci_resource_start(dev, bar);
+ resource_size_t len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len || !start) {
+ return NULL;
+ }
+
+ if (maxlen && len > maxlen) {
+ len = maxlen;
+ }
+
+ if (flags & IORESOURCE_IO) {
+ return ioport_map(start, len);
+ }
+
+ if (flags & IORESOURCE_MEM) {
+ if (flags & IORESOURCE_CACHEABLE) {
+ return ioremap(start, len);
+ }
+ return ioremap_nocache(start, len);
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ if ((unsigned long)addr >= VMALLOC_START &&
+ (unsigned long)addr < VMALLOC_END) {
+ iounmap(addr);
+ }
+}
+EXPORT_SYMBOL(pci_iounmap);
+
+/*
+ * From arch/arm/kernel/bios32.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ */
+static void __init pcibios_init_hw(struct hw_pci *hw)
+{
+ struct pci_sys_data *sys = NULL;
+ int ret;
+ int nr, busnr;
+
+ for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
+ sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
+ if (!sys)
+ panic("PCI: unable to allocate sys data!");
+
+ sys->hw = hw;
+ sys->busnr = busnr;
+ sys->map_irq = hw->map_irq;
+ sys->resource[0] = &ioport_resource;
+ sys->resource[1] = &iomem_resource;
+
+ ret = hw->setup(nr, sys);
+
+ if (ret > 0) {
+ sys->bus = hw->scan(nr, sys);
+
+ if (!sys->bus)
+ panic("PCI: unable to scan bus!");
+
+ busnr = sys->bus->subordinate + 1;
+
+ list_add(&sys->node, &hw->buses);
+ } else {
+ kfree(sys);
+ if (ret < 0)
+ break;
+ }
+ }
+}
+
+/*
+ * Swizzle the device pin each time we cross a bridge.
+ * This might update pin and returns the slot number.
+ */
+static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ int slot = 0, oldpin = *pin;
+
+ if (sys->swizzle)
+ slot = sys->swizzle(dev, pin);
+
+ if (debug_pci)
+ printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
+ pci_name(dev), oldpin, *pin, slot);
+ return slot;
+}
+
+/*
+ * Map a slot/pin to an IRQ.
+ */
+static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ int irq = -1;
+
+ if (sys->map_irq)
+ irq = sys->map_irq(dev, slot, pin);
+
+ if (debug_pci)
+ printk("PCI: %s mapping slot %d pin %d => irq %d\n",
+ pci_name(dev), slot, pin, irq);
+
+ return irq;
+}
+
+void __init pci_common_init(struct hw_pci *hw)
+{
+ struct pci_sys_data *sys;
+
+ INIT_LIST_HEAD(&hw->buses);
+
+ if (hw->preinit)
+ hw->preinit();
+ pcibios_init_hw(hw);
+ if (hw->postinit)
+ hw->postinit();
+
+ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
+ list_for_each_entry(sys, &hw->buses, node) {
+ struct pci_bus *bus = sys->bus;
+ /*
+ * Size the bridge windows.
+ */
+ pci_bus_size_bridges(bus);
+ /*
+ * Assign resources.
+ */
+ pci_bus_assign_resources(bus);
+
+ /*
+ * Tell drivers about devices found.
+ */
+ pci_bus_add_devices(bus);
+ }
+}
+
+char * __init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "debug")) {
+ debug_pci = 1;
+ return NULL;
+ }
+ return str;
+}
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO && start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+
+ res->start = (start + align - 1) & ~(align - 1);
+}
+
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ if (debug_pci)
+ printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind. Currently this is CyberPro 20x0 only.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+ return (dev->vendor == PCI_VENDOR_ID_INTERG &&
+ (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
+ dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
+ (dev->vendor == PCI_VENDOR_ID_ITE &&
+ dev->device == PCI_DEVICE_ID_ITE_8152);
+
+}
+
+/*
+ * Adjust the device resources from bus-centric to Linux-centric.
+ */
+static void __devinit
+pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev)
+{
+ resource_size_t offset;
+ int i;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ if (dev->resource[i].start == 0)
+ continue;
+ if (dev->resource[i].flags & IORESOURCE_MEM)
+ offset = root->mem_offset;
+ else
+ offset = root->io_offset;
+
+ dev->resource[i].start += offset;
+ dev->resource[i].end += offset;
+ }
+}
+
+static void __devinit
+pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
+{
+ struct pci_dev *dev = bus->self;
+ int i;
+
+ if (!dev) {
+ /*
+ * Assign root bus resources.
+ */
+ for (i = 0; i < 3; i++)
+ bus->resource[i] = root->resource[i];
+ }
+}
+
+/*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+ */
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_sys_data *root = bus->sysdata;
+ struct pci_dev *dev;
+ u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+ PCI_COMMAND_FAST_BACK;
+
+ pbus_assign_bus_resources(bus, root);
+
+ /*
+ * Walk the devices on this bus, working out what we can
+ * and can't support.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 status;
+
+ pdev_fixup_device_resources(root, dev);
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+
+ /*
+ * If any device on this bus does not support fast back
+ * to back transfers, then the bus as a whole is not able
+ * to support them. Having fast back to back transfers
+ * on saves us one PCI cycle per transaction.
+ */
+ if (!(status & PCI_STATUS_FAST_BACK))
+ features &= ~PCI_COMMAND_FAST_BACK;
+
+ if (pdev_bad_for_parity(dev))
+ features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
+
+ switch (dev->class >> 8) {
+ case PCI_CLASS_BRIDGE_PCI:
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
+ status |= PCI_BRIDGE_CTL_PARITY |
+ PCI_BRIDGE_CTL_MASTER_ABORT;
+ status &= ~(PCI_BRIDGE_CTL_BUS_RESET |
+ PCI_BRIDGE_CTL_FAST_BACK);
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ &status);
+ status |= PCI_CB_BRIDGE_CTL_PARITY |
+ PCI_CB_BRIDGE_CTL_MASTER_ABORT;
+ pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ status);
+ break;
+ }
+ }
+
+ /*
+ * Now walk the devices again, this time setting them up.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= features;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ L1_CACHE_BYTES >> 2);
+ }
+
+ /*
+ * Propagate the flags to the PCI bridge.
+ */
+ if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ if (features & PCI_COMMAND_FAST_BACK)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+ if (features & PCI_COMMAND_PARITY)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
+ }
+
+ /*
+ * Report what we did for this bus
+ */
+ printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
+ bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+}
+/*
+ * Convert from Linux-centric to bus-centric addresses for bridge devices.
+ */
+void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ struct pci_sys_data *root = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = root->io_offset;
+ if (res->flags & IORESOURCE_MEM)
+ offset = root->mem_offset;
+
+ region->start = res->start - offset;
+ region->end = res->end - offset;
+}
+
+void __devinit
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ struct pci_sys_data *root = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = root->io_offset;
+ if (res->flags & IORESOURCE_MEM)
+ offset = root->mem_offset;
+
+ res->start = region->start + offset;
+ res->end = region->end + offset;
+}
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_fixup_bus);
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+#endif
+
+/**
+ * pcibios_enable_device - Enable I/O and memory.
+ * @dev: PCI device to be enabled
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = dev->resource + idx;
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available because"
+ " of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ /*
+ * Bridges (eg, cardbus bridges) need to be fully enabled
+ */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd) {
+ printk("PCI: enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+
+struct pci_ops ubi32_pci_ops = {
+ .read = ubi32_pci_read_config,
+ .write = ubi32_pci_write_config,
+};
+
+static struct pci_bus *ubi32_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ return pci_scan_bus(sys->busnr, &ubi32_pci_ops, sys);
+}
+
+#define UBI32_PCI_MEM_BASE PCI_DEV_REG_BASE
+#define UBI32_PCI_MEM_LEN 0x80000000
+
+#define UBI32_PCI_IO_BASE 0x0
+#define UBI32_PCI_IO_END 0x0
+
+static struct resource ubi32_pci_mem = {
+ .name = "PCI memory space",
+ .start = UBI32_PCI_MEM_BASE,
+ .end = UBI32_PCI_MEM_BASE + UBI32_PCI_MEM_LEN - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ubi32_pci_io = {
+ .name = "PCI IO space",
+ .start = UBI32_PCI_IO_BASE,
+ .end = UBI32_PCI_IO_END,
+ .flags = IORESOURCE_IO,
+};
+
+static int __init ubi32_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr > 0)
+ return 0;
+
+ request_resource(&iomem_resource, &ubi32_pci_mem);
+ request_resource(&ioport_resource, &ubi32_pci_io);
+
+ sys->resource[0] = &ubi32_pci_io;
+ sys->resource[1] = &ubi32_pci_mem;
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+static void __init ubi32_pci_preinit(void)
+{
+}
+
+static int __init ubi32_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return pci_node->dn.recvirq;
+}
+
+struct hw_pci ubi32_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ubi32_pci_preinit,
+ .setup = ubi32_pci_setup,
+ .scan = ubi32_pci_scan_bus,
+ .map_irq = ubi32_pci_map_irq,
+};
+
+static int __init ubi32_pci_init(void)
+{
+ pci_node = (struct pci_devnode *)devtree_find_node("pci");
+ if (pci_node == NULL) {
+ printk(KERN_WARNING "PCI init failed\n");
+ return -ENOSYS;
+ }
+ pci_common_init(&ubi32_pci);
+ return 0;
+}
+
+subsys_initcall(ubi32_pci_init);
+
+/*
+ * workaround for dual PCI card interrupt
+ */
+#define PCI_COMMON_INT_BIT (1 << 19)
+void ubi32_pci_int_wr(void)
+{
+ volatile unsigned int pci_int_line;
+ pci_int_line = UBICOM32_IO_PORT(RB)->gpio_in;
+ if (!(pci_int_line & PCI_COMMON_INT_BIT))
+ {
+ ubicom32_set_interrupt(pci_node->dn.recvirq);
+ }
+}
+EXPORT_SYMBOL(ubi32_pci_int_wr);
--- /dev/null
+++ b/arch/ubicom32/mach-common/ring_tio.c
@@ -0,0 +1,123 @@
+/*
+ * arch/ubicom32/mach-common/ring_tio.c
+ * Generic initialization for UIO Ubicom32 Ring
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/devtree.h>
+#include <asm/ring_tio.h>
+
+static const char *ring_tio_driver_name = "uio_ubicom32ring";
+
+/*
+ * The number of ring_tio's currently allocated, used for .id
+ */
+static int __initdata ring_tio_count;
+
+/*
+ * The maximum number of resources that the ring_tio will have.
+ * Currently 3, a register space, and up to 2 interrupts.
+ */
+#define RING_TIO_MAX_RESOURCES 3
+
+/*
+ * ring_tio_init
+ * Checks the device tree and instantiates the driver if found
+ */
+void __init ring_tio_init(const char *node_name)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ int resource_idx = 0;
+ struct ring_tio_node *ring_node;
+
+ /*
+ * Check the device tree for the ring_tio
+ */
+ ring_node = (struct ring_tio_node *)devtree_find_node(node_name);
+ if (!ring_node) {
+ printk(KERN_WARNING "Ring TIO '%s' not found\n", node_name);
+ return;
+ }
+
+ if (ring_node->version != RING_TIO_NODE_VERSION) {
+ printk(KERN_WARNING "ring_tio not compatible\n");
+ return;
+ }
+
+ /*
+ * Dynamically create the platform_device structure and resources
+ */
+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!pdev) {
+ printk(KERN_WARNING "ring_tio could not alloc pdev\n");
+ return;
+ }
+
+ res = kzalloc(sizeof(struct resource) * RING_TIO_MAX_RESOURCES,
+ GFP_KERNEL);
+ if (!res) {
+ kfree(pdev);
+ printk(KERN_WARNING "ring_tio could not alloc res\n");
+ return;
+ }
+
+ pdev->name = ring_tio_driver_name;
+ pdev->id = ring_tio_count++;
+ pdev->resource = res;
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ res[resource_idx].start = (u32_t)(ring_node->regs);
+ res[resource_idx].end = (u32_t)(ring_node->regs);
+ res[resource_idx].flags = IORESOURCE_MEM;
+ resource_idx++;
+
+ if (ring_node->dn.sendirq != 0xFF) {
+ res[resource_idx].start = ring_node->dn.sendirq;
+ res[resource_idx].flags = IORESOURCE_IRQ;
+ resource_idx++;
+ }
+
+ if (ring_node->dn.recvirq != 0xFF) {
+ res[resource_idx].start = ring_node->dn.recvirq;
+ res[resource_idx].flags = IORESOURCE_IRQ;
+ resource_idx++;
+ }
+ pdev->num_resources = resource_idx;
+
+ printk(KERN_INFO "RingTIO.%d '%s' found irq=%d/%d regs=%p pdev=%p/%p\n",
+ ring_tio_count - 1, node_name, ring_node->dn.sendirq,
+ ring_node->dn.recvirq, ring_node->regs, pdev, res);
+
+ /*
+ * Try to get the device registered
+ */
+ pdev->dev.platform_data = (void *)node_name;
+ if (platform_device_register(pdev) < 0) {
+ printk(KERN_WARNING "Ring failed to register\n");
+ kfree(pdev);
+ kfree(res);
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/mach-common/ubi32-gpio.c
@@ -0,0 +1,411 @@
+/*
+ * arch/ubicom32/mach-common/ubi32-gpio.c
+ * Ubicom gpio driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/version.h>
+
+#if defined(CONFIG_PROC_FS)
+#include <linux/proc_fs.h>
+#endif
+
+#include <linux/io.h>
+#include <asm/ip5000.h>
+#include <linux/gpio.h>
+
+#define UBI_GPIO_CHECK_RANGE 0 /* !0 enables range checking */
+
+
+/*
+ * Each I/O port can be configured to operate in one of several
+ * functional modes. One of these modes is GPIO, which causes the
+ * entire port to function as a GPIO port. Since the various port
+ * registers serve the system with other important functions, such as
+ * ethernet, serial, USB, etc., it isn't advantageous to set any of
+ * the ports to be entirely dedicated for GPIO use. The processor
+ * alternatively allows individual bits of a port to be assigned to be
+ * used as GPIO independently from the overall port function. This
+ * bit-by-bit assignment is selected by setting the corresponding bit
+ * in the port's gpio_mask register. When set, the selected bit is
+ * then enabled as a GPIO. If the corresponding bit is set in the
+ * gpio_ctl register of the port, the bit is configured as a GPIO
+ * output. Otherwise, it is an input.
+ *
+ * NOTE: This driver uses the bit-by-bit GPIO function assignment
+ * exclusively and *never* sets the port function registers to the
+ * GPIO function.
+ *
+ * GPIO is not the main function of any of the I/O ports. The port
+ * bit widths are variable from one port to the next, determined by
+ * the more common I/O functions of the ports. For simplicity, this
+ * driver assumes all the ports are 32 bits wide regardless of the
+ * real bit width of the port. GPIO bits are numbered from zero to
+ * MAX_UBICOM_GPIOS. Within a port, the least significant bit is
+ * numbered bit zero, the most significant is bit 31. Since the ports
+ * are considered logically contiguous, GPIO #32 is the zeroth bit in
+ * port #1, and so on. Due to the hardware definition, there are
+ * large gaps in the GPIO numbers representing real pins.
+ *
+ * NOTE: It is up to the programmer to refer to the processor data
+ * sheet to determine which bits in which ports can be accessed and
+ * used for GPIO.
+ *
+ */
+
+
+/* There are 9 ports, A through I. Not all 32 bits in each
+ * port can be a GPIO, but we pretend they are. Its up to the
+ * programmer to refer to the processor data sheet.
+ */
+#define MAX_UBICOM_GPIOS (9 * 32) /* ARCH_NR_GPIOS */
+#define NUM_GPIO_PORTS (gpio_bank(MAX_UBICOM_GPIOS))
+
+
+/* GPIO reservation bit map array */
+static int reserved_gpio_map[NUM_GPIO_PORTS];
+
+
+/* Array of hardware io_port addresses */
+static struct ubicom32_io_port *gpio_bank_addr[NUM_GPIO_PORTS] =
+{
+ UBICOM32_IO_PORT(RA),
+ UBICOM32_IO_PORT(RB),
+ UBICOM32_IO_PORT(RC),
+ UBICOM32_IO_PORT(RD),
+ UBICOM32_IO_PORT(RE),
+ UBICOM32_IO_PORT(RF),
+ UBICOM32_IO_PORT(RG),
+ UBICOM32_IO_PORT(RH),
+ UBICOM32_IO_PORT(RI)
+};
+
+
+struct ubi_gpio_chip {
+ /*
+ * Right now, nothing else lives here.
+ */
+ struct gpio_chip gpio_chip;
+};
+
+
+#if UBI_GPIO_CHECK_RANGE
+inline int check_gpio(unsigned gpio)
+{
+ if (gpio >= MAX_UBICOM_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+#else
+#define check_gpio(n) (0)
+#endif
+
+/*
+ * ubi_gpio_get_port
+ * Get the IO port associated with a certain gpio
+ */
+struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio)
+{
+ if (gpio_bank(gpio) > NUM_GPIO_PORTS) {
+ return NULL;
+ }
+ return gpio_bank_addr[gpio_bank(gpio)];
+}
+
+/*
+ * ubi_gpio_error()
+ */
+static void ubi_gpio_error(unsigned gpio)
+{
+ printk(KERN_ERR "ubicom-gpio: GPIO %d wasn't requested!\n", gpio);
+}
+
+/*
+ * ubi_port_setup()
+ */
+static void ubi_port_setup(unsigned gpio, unsigned short usage)
+{
+ if (!check_gpio(gpio)) {
+ if (usage) {
+ UBICOM32_GPIO_ENABLE(gpio);
+ } else {
+ UBICOM32_GPIO_DISABLE(gpio);
+ }
+ }
+}
+
+/*
+ * ubi_gpio_request()
+ */
+static int ubi_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR "ubi-gpio: GPIO %d is already reserved!\n",
+ gpio);
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+ ubi_port_setup(gpio, 1);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+/*
+ * ubi_gpio_free()
+ */
+static void ubi_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ ubi_gpio_error(gpio);
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Assert the pin is no longer claimed */
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ /* Revert port bit to use specified by port->function */
+ ubi_port_setup(gpio, 0);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * ubi_gpio_direction_input()
+ */
+static int ubi_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ unsigned long flags;
+
+ if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ ubi_gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+
+ /* Configure pin as gpio */
+ ubi_port_setup(gpio, 1);
+
+ /* Assert pin is an input */
+ UBICOM32_GPIO_SET_PIN_INPUT(gpio);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * ubi_gpio_direction_output()
+ */
+static int ubi_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ unsigned long flags;
+
+ if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ ubi_gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+
+ /* Configure pin as gpio and set initial value in gpio_out register
+ * so that when we enable it as an output, it will have the correct
+ * initial value.
+ */
+ ubi_port_setup(gpio, 1);
+ if (value) {
+ UBICOM32_GPIO_SET_PIN_HIGH(gpio);
+ } else {
+ UBICOM32_GPIO_SET_PIN_LOW(gpio);
+ }
+
+ /* Enable the pin as an output */
+ UBICOM32_GPIO_SET_PIN_OUTPUT(gpio);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * ubi_gpio_get_value()
+ */
+static int ubi_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return 0 != (gpio_bank_addr[gpio_bank(gpio)]->gpio_in & gpio_bit(gpio));
+}
+
+
+/*
+ * ubi_gpio_set_value()
+ */
+static void ubi_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
+ int arg)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+
+ if (arg) {
+ UBICOM32_GPIO_SET_PIN_HIGH(gpio);
+ } else {
+ UBICOM32_GPIO_SET_PIN_LOW(gpio);
+ }
+
+ local_irq_restore(flags);
+}
+
+
+/*
+ * ubi_gpio_to_irq()
+ */
+static int ubi_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ return gpio_to_irq(gpio);
+}
+
+
+/*
+ * ubi_gpio_init()
+ */
+int __init ubi_gpio_init(void)
+{
+ int k;
+ int status;
+ struct ubi_gpio_chip *chip;
+ struct gpio_chip *gc;
+
+ printk(KERN_INFO "Ubicom GPIO Controller\n");
+
+ chip = kzalloc(sizeof(struct ubi_gpio_chip), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ gc = &chip->gpio_chip;
+ gc->request = ubi_gpio_request;
+ gc->free = ubi_gpio_free;
+ gc->to_irq = ubi_gpio_to_irq;
+ gc->direction_input = ubi_gpio_direction_input;
+ gc->direction_output = ubi_gpio_direction_output;
+ gc->get = ubi_gpio_get_value;
+ gc->set = ubi_gpio_set_value;
+ gc->can_sleep = 0;
+ gc->base = 0;
+ gc->ngpio = MAX_UBICOM_GPIOS; /* ARCH_NR_GPIOS - 1 */
+ gc->label = "ubi_gpio";
+
+ status = gpiochip_add(gc);
+ if (status != 0) {
+ kfree(chip);
+ return status;
+ }
+
+ /* Assert all pins are free */
+ for (k = 0; k < NUM_GPIO_PORTS; k++) {
+ reserved_gpio_map[k] = 0;
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_PROC_FS)
+/*
+ * ubi_get_gpio_dir()
+ */
+static int ubi_get_gpio_dir(unsigned gpio)
+{
+ if (gpio_bank_addr[gpio_bank(gpio)]->gpio_ctl & gpio_bit(gpio))
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * gpio_proc_read()
+ */
+static int ubi_gpio_proc_read(char *buf, char **start, off_t offset,
+ int len, int *unused_i, void *unused_v)
+{
+ int c, outlen = 0;
+
+ for (c = 0; c < MAX_UBICOM_GPIOS; c++) {
+ if (!check_gpio(c) &&
+ (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) {
+ len = sprintf(buf, "GPIO_%d:\t\tGPIO %s\n", c,
+ ubi_get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+ } else {
+ continue;
+ }
+
+ buf += len;
+ outlen += len;
+ }
+ return outlen;
+}
+
+/*
+ * ubi_gpio_register_proc()
+ */
+static __init int ubi_gpio_register_proc(void)
+{
+ struct proc_dir_entry *proc_gpio;
+
+ proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL);
+ if (proc_gpio)
+ proc_gpio->read_proc = ubi_gpio_proc_read;
+
+ return proc_gpio != NULL;
+}
+device_initcall(ubi_gpio_register_proc);
+#endif
--- /dev/null
+++ b/arch/ubicom32/mach-common/ubicom32hid.c
@@ -0,0 +1,557 @@
+/*
+ * arch/ubicom32/mach-common/ubicom32hid.c
+ * I2C driver for HID coprocessor found on some DPF implementations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+
+#include <asm/ubicom32hid.h>
+
+#define DRIVER_NAME "ubicom32hid"
+
+#ifdef DEBUG
+static int ubicom32hid_debug;
+#endif
+
+static const struct i2c_device_id ubicom32hid_id[] = {
+ { DRIVER_NAME, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ubicom32hid_id);
+
+/*
+ * Define this to make IR checking strict, in general, it's not needed
+ */
+#undef UBICOM32HID_STRICT_IR_CHECK
+
+#define UBICOM32HID_CMD_SET_PWM 0x01
+#define UBICOM32HID_CMD_SET_BL_EN 0x02
+#define UBICOM32HID_BL_EN_LOW 0x00
+#define UBICOM32HID_BL_EN_HIZ 0x01
+#define UBICOM32HID_BL_EN_HI 0x02
+#define UBICOM32HID_CMD_FLUSH 0x99
+#define UBICOM32HID_CMD_RESET 0x99
+#define UBICOM32HID_CMD_GET_IR_SWITCH 0xC0
+#define UBICOM32HID_CMD_GET_REVISION 0xfd
+#define UBICOM32HID_CMD_GET_DEVICE_ID 0xfe
+#define UBICOM32HID_CMD_GET_VERSION 0xff
+#define UBICOM32HID_DEVICE_ID 0x49
+
+#define UBICOM32HID_MAX_BRIGHTNESS_PWM 255
+
+/*
+ * Data structure returned by the HID device
+ */
+struct ubicom32hid_input_data {
+ uint32_t ircmd;
+ uint8_t sw_state;
+ uint8_t sw_changed;
+};
+
+/*
+ * Our private data
+ */
+struct ubicom32hid_data {
+ /*
+ * Pointer to the platform data structure, we need the settings.
+ */
+ const struct ubicom32hid_platform_data *pdata;
+
+ /*
+ * Backlight device
+ */
+ struct backlight_device *bldev;
+
+ /*
+ * I2C client, for sending messages to the HID device
+ */
+ struct i2c_client *client;
+
+ /*
+ * Current intensity, used for get_intensity.
+ */
+ int cur_intensity;
+
+ /*
+ * Input subsystem
+ * We won't register an input subsystem if there are no mappings.
+ */
+ struct input_polled_dev *poll_dev;
+};
+
+
+/*
+ * ubicom32hid_set_intensity
+ */
+static int ubicom32hid_set_intensity(struct backlight_device *bd)
+{
+ struct ubicom32hid_data *ud =
+ (struct ubicom32hid_data *)bl_get_data(bd);
+ int intensity = bd->props.brightness;
+ int reg;
+ u8_t val;
+ int ret;
+
+ /*
+ * If we're blanked the the intensity doesn't matter.
+ */
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
+ intensity = 0;
+ }
+
+ /*
+ * Set the brightness based on the type of backlight
+ */
+ if (ud->pdata->type == UBICOM32HID_BL_TYPE_BINARY) {
+ reg = UBICOM32HID_CMD_SET_BL_EN;
+ if (intensity) {
+ val = ud->pdata->invert
+ ? UBICOM32HID_BL_EN_LOW : UBICOM32HID_BL_EN_HI;
+ } else {
+ val = ud->pdata->invert
+ ? UBICOM32HID_BL_EN_HI : UBICOM32HID_BL_EN_LOW;
+ }
+ } else {
+ reg = UBICOM32HID_CMD_SET_PWM;
+ val = ud->pdata->invert
+ ? (UBICOM32HID_MAX_BRIGHTNESS_PWM - intensity) :
+ intensity;
+ }
+
+ /*
+ * Send the command
+ */
+ ret = i2c_smbus_write_byte_data(ud->client, reg, val);
+ if (ret < 0) {
+ dev_warn(&ud->client->dev, "Unable to write backlight err=%d\n",
+ ret);
+ return ret;
+ }
+
+ ud->cur_intensity = intensity;
+
+ return 0;
+}
+
+/*
+ * ubicom32hid_get_intensity
+ * Return the current intensity of the backlight.
+ */
+static int ubicom32hid_get_intensity(struct backlight_device *bd)
+{
+ struct ubicom32hid_data *ud =
+ (struct ubicom32hid_data *)bl_get_data(bd);
+
+ return ud->cur_intensity;
+}
+
+/*
+ * ubicom32hid_verify_data
+ * Verify the data to see if there is any action to be taken
+ *
+ * Returns 0 if no action is to be taken, non-zero otherwise
+ */
+static int ubicom32hid_verify_data(struct ubicom32hid_data *ud,
+ struct ubicom32hid_input_data *data)
+{
+ uint8_t *ircmd = (uint8_t *)&(data->ircmd);
+
+ /*
+ * ircmd == DEADBEEF means ir queue is empty. Since this is a
+ * meaningful code, that means the rest of the message is most likely
+ * correct, so only process the data if the switch state has changed.
+ */
+ if (data->ircmd == 0xDEADBEEF) {
+ return data->sw_changed != 0;
+ }
+
+ /*
+ * We have an ircmd which is not empty:
+ * Data[1] should be the complement of Data[0]
+ */
+ if (ircmd[0] != (u8_t)~ircmd[1]) {
+ return 0;
+ }
+
+#ifdef UBICOM32HID_STRICT_IR_CHECK
+ /*
+ * It seems that some remote controls don't follow the NEC protocol
+ * properly, so only do this check if the remote does indeed follow the
+ * spec. Data[3] should be the complement of Data[2]
+ */
+ if (ircmd[2] == (u8_t)~ircmd[3]) {
+ return 1;
+ }
+
+ /*
+ * For non-compliant remotes, check the system code according to what
+ * they send.
+ */
+ if ((ircmd[2] != UBICOM32HID_IR_SYSTEM_CODE_CHECK) ||
+ (ircmd[3] != UBICOM32HID_IR_SYSTEM_CODE)) {
+ return 0;
+ }
+#endif
+
+ /*
+ * Data checks out, process
+ */
+ return 1;
+}
+
+/*
+ * ubicom32hid_poll_input
+ * Poll the input from the HID device.
+ */
+static void ubicom32hid_poll_input(struct input_polled_dev *dev)
+{
+ struct ubicom32hid_data *ud = (struct ubicom32hid_data *)dev->private;
+ const struct ubicom32hid_platform_data *pdata = ud->pdata;
+ struct ubicom32hid_input_data data;
+ struct input_dev *id = dev->input;
+ int i;
+ int sync_needed = 0;
+ uint8_t cmd;
+ int ret;
+
+ /*
+ * Flush the queue
+ */
+ cmd = UBICOM32HID_CMD_FLUSH;
+ ret = i2c_master_send(ud->client, &cmd, 1);
+ if (ret < 0) {
+ return;
+ }
+
+ ret = i2c_smbus_read_i2c_block_data(
+ ud->client, UBICOM32HID_CMD_GET_IR_SWITCH, 6, (void *)&data);
+ if (ret < 0) {
+ return;
+ }
+
+ /*
+ * Verify the data to see if there is any action to be taken
+ */
+ if (!ubicom32hid_verify_data(ud, &data)) {
+ return;
+ }
+
+#ifdef DEBUG
+ if (ubicom32hid_debug) {
+ printk("Polled ircmd=%8x swstate=%2x swchanged=%2x\n",
+ data.ircmd, data.sw_state, data.sw_changed);
+ }
+#endif
+
+ /*
+ * Process changed switches
+ */
+ if (data.sw_changed) {
+ const struct ubicom32hid_button *ub = pdata->buttons;
+ for (i = 0; i < pdata->nbuttons; i++, ub++) {
+ uint8_t mask = (1 << ub->bit);
+ if (!(data.sw_changed & mask)) {
+ continue;
+ }
+
+ sync_needed = 1;
+ input_event(id, ub->type, ub->code,
+ (data.sw_state & mask) ? 1 : 0);
+ }
+ }
+ if (sync_needed) {
+ input_sync(id);
+ }
+
+ /*
+ * Process ir codes
+ */
+ if (data.ircmd != 0xDEADBEEF) {
+ const struct ubicom32hid_ir *ui = pdata->ircodes;
+ for (i = 0; i < pdata->nircodes; i++, ui++) {
+ if (ui->ir_code == data.ircmd) {
+ /*
+ * Simulate a up/down event
+ */
+ input_event(id, ui->type, ui->code, 1);
+ input_sync(id);
+ input_event(id, ui->type, ui->code, 0);
+ input_sync(id);
+ }
+ }
+ }
+}
+
+
+/*
+ * Backlight ops
+ */
+static struct backlight_ops ubicom32hid_blops = {
+ .get_brightness = ubicom32hid_get_intensity,
+ .update_status = ubicom32hid_set_intensity,
+};
+
+/*
+ * ubicom32hid_probe
+ */
+static int ubicom32hid_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ubicom32hid_platform_data *pdata;
+ struct ubicom32hid_data *ud;
+ int ret;
+ int i;
+ u8 version[2];
+ char buf[1];
+
+ pdata = client->dev.platform_data;
+ if (pdata == NULL) {
+ return -ENODEV;
+ }
+
+ /*
+ * See if we even have a device available before allocating memory.
+ *
+ * Hard reset the device
+ */
+ ret = gpio_request(pdata->gpio_reset, "ubicom32hid-reset");
+ if (ret < 0) {
+ return ret;
+ }
+ gpio_direction_output(pdata->gpio_reset, pdata->gpio_reset_polarity);
+ udelay(100);
+ gpio_set_value(pdata->gpio_reset, !pdata->gpio_reset_polarity);
+ udelay(100);
+
+ /*
+ * soft reset the device. It sometimes takes a while to do this.
+ */
+ for (i = 0; i < 50; i++) {
+ buf[0] = UBICOM32HID_CMD_RESET;
+ ret = i2c_master_send(client, buf, 1);
+ if (ret > 0) {
+ break;
+ }
+ udelay(10000);
+ }
+ if (i == 50) {
+ dev_warn(&client->dev, "Unable to reset device\n");
+ goto fail;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_DEVICE_ID);
+ if (ret != UBICOM32HID_DEVICE_ID) {
+ dev_warn(&client->dev, "Incorrect device id %02x\n", buf[0]);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_VERSION);
+ if (ret < 0) {
+ dev_warn(&client->dev, "Unable to get version\n");
+ goto fail;
+ }
+ version[0] = ret;
+
+ ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_REVISION);
+ if (ret < 0) {
+ dev_warn(&client->dev, "Unable to get revision\n");
+ goto fail;
+ }
+ version[1] = ret;
+
+ /*
+ * Allocate our private data
+ */
+ ud = kzalloc(sizeof(struct ubicom32hid_data), GFP_KERNEL);
+ if (!ud) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ ud->pdata = pdata;
+ ud->client = client;
+
+ /*
+ * Register our backlight device
+ */
+ ud->bldev = backlight_device_register(DRIVER_NAME, &client->dev,
+ ud, &ubicom32hid_blops);
+ if (IS_ERR(ud->bldev)) {
+ ret = PTR_ERR(ud->bldev);
+ goto fail2;
+ }
+ platform_set_drvdata(client, ud);
+
+ /*
+ * Start up the backlight with the requested intensity
+ */
+ ud->bldev->props.power = FB_BLANK_UNBLANK;
+ ud->bldev->props.max_brightness =
+ (pdata->type == UBICOM32HID_BL_TYPE_PWM) ?
+ UBICOM32HID_MAX_BRIGHTNESS_PWM : 1;
+ if (pdata->default_intensity < ud->bldev->props.max_brightness) {
+ ud->bldev->props.brightness = pdata->default_intensity;
+ } else {
+ dev_warn(&client->dev, "Default brightness out of range, "
+ "setting to max\n");
+ ud->bldev->props.brightness = ud->bldev->props.max_brightness;
+ }
+
+ ubicom32hid_set_intensity(ud->bldev);
+
+ /*
+ * Check to see if we have any inputs
+ */
+ if (!pdata->nbuttons && !pdata->nircodes) {
+ goto done;
+ }
+
+ /*
+ * We have buttons or codes, we must register an input device
+ */
+ ud->poll_dev = input_allocate_polled_device();
+ if (!ud->poll_dev) {
+ ret = -ENOMEM;
+ goto fail3;
+ }
+
+ /*
+ * Setup the polling to default to 100ms
+ */
+ ud->poll_dev->poll = ubicom32hid_poll_input;
+ ud->poll_dev->poll_interval =
+ pdata->poll_interval ? pdata->poll_interval : 100;
+ ud->poll_dev->private = ud;
+
+ ud->poll_dev->input->name =
+ pdata->input_name ? pdata->input_name : "Ubicom32HID";
+ ud->poll_dev->input->phys = "ubicom32hid/input0";
+ ud->poll_dev->input->dev.parent = &client->dev;
+ ud->poll_dev->input->id.bustype = BUS_I2C;
+
+ /*
+ * Set the capabilities by running through the buttons and ir codes
+ */
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct ubicom32hid_button *ub = &pdata->buttons[i];
+
+ input_set_capability(ud->poll_dev->input,
+ ub->type ? ub->type : EV_KEY, ub->code);
+ }
+
+ for (i = 0; i < pdata->nircodes; i++) {
+ const struct ubicom32hid_ir *ui = &pdata->ircodes[i];
+
+ input_set_capability(ud->poll_dev->input,
+ ui->type ? ui->type : EV_KEY, ui->code);
+ }
+
+ ret = input_register_polled_device(ud->poll_dev);
+ if (ret) {
+ goto fail3;
+ }
+
+done:
+ printk(KERN_INFO DRIVER_NAME ": enabled, version=%02x.%02x\n",
+ version[0], version[1]);
+
+ return 0;
+
+fail3:
+ gpio_free(ud->pdata->gpio_reset);
+ backlight_device_unregister(ud->bldev);
+fail2:
+ kfree(ud);
+fail:
+ gpio_free(pdata->gpio_reset);
+ return ret;
+}
+
+/*
+ * ubicom32hid_remove
+ */
+static int ubicom32hid_remove(struct i2c_client *client)
+{
+ struct ubicom32hid_data *ud =
+ (struct ubicom32hid_data *)platform_get_drvdata(client);
+
+ gpio_free(ud->pdata->gpio_reset);
+
+ backlight_device_unregister(ud->bldev);
+
+ if (ud->poll_dev) {
+ input_unregister_polled_device(ud->poll_dev);
+ input_free_polled_device(ud->poll_dev);
+ }
+
+ platform_set_drvdata(client, NULL);
+
+ kfree(ud);
+
+ return 0;
+}
+
+static struct i2c_driver ubicom32hid_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ubicom32hid_probe,
+ .remove = __exit_p(ubicom32hid_remove),
+ .id_table = ubicom32hid_id,
+};
+
+/*
+ * ubicom32hid_init
+ */
+static int __init ubicom32hid_init(void)
+{
+ return i2c_add_driver(&ubicom32hid_driver);
+}
+module_init(ubicom32hid_init);
+
+/*
+ * ubicom32hid_exit
+ */
+static void __exit ubicom32hid_exit(void)
+{
+ i2c_del_driver(&ubicom32hid_driver);
+}
+module_exit(ubicom32hid_exit);
+
+MODULE_AUTHOR("Pat Tjin <@ubicom.com>")
+MODULE_DESCRIPTION("Ubicom HID driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/ubicom32/mach-common/ubicom32input.c
@@ -0,0 +1,265 @@
+/*
+ * arch/ubicom32/mach-common/ubicom32input.c
+ * Ubicom32 Input driver
+ *
+ * based on gpio-keys
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ *
+ *
+ * TODO: add groups for inputs which can be sampled together (i.e. I2C)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/ubicom32input.h>
+
+struct ubicom32input_data {
+ struct ubicom32input_platform_data *pdata;
+
+ struct input_polled_dev *poll_dev;
+
+ /*
+ * collection of previous states for buttons
+ */
+ u8 prev_state[0];
+};
+
+/*
+ * ubicom32input_poll
+ */
+static void ubicom32input_poll(struct input_polled_dev *dev)
+{
+ struct ubicom32input_data *ud =
+ (struct ubicom32input_data *)dev->private;
+ struct ubicom32input_platform_data *pdata = ud->pdata;
+ struct input_dev *id = dev->input;
+ int i;
+ int sync_needed = 0;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct ubicom32input_button *ub = &pdata->buttons[i];
+ int state = 0;
+
+ int val = gpio_get_value(ub->gpio);
+
+ /*
+ * Check to see if the state changed from the last time we
+ * looked
+ */
+ if (val == ud->prev_state[i]) {
+ continue;
+ }
+
+ /*
+ * The state has changed, determine if we are "up" or "down"
+ */
+ ud->prev_state[i] = val;
+
+ if ((!val && ub->active_low) || (val && !ub->active_low)) {
+ state = 1;
+ }
+
+ input_event(id, ub->type, ub->code, state);
+ sync_needed = 1;
+ }
+
+ if (sync_needed) {
+ input_sync(id);
+ }
+}
+
+/*
+ * ubicom32input_probe
+ */
+static int __devinit ubicom32input_probe(struct platform_device *pdev)
+{
+ int i;
+ struct ubicom32input_data *ud;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input_dev;
+ struct ubicom32input_platform_data *pdata;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ return -EINVAL;
+ }
+
+ ud = kzalloc(sizeof(struct ubicom32input_data) +
+ pdata->nbuttons, GFP_KERNEL);
+ if (!ud) {
+ return -ENOMEM;
+ }
+ ud->pdata = pdata;
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, ud);
+
+ ud->poll_dev = poll_dev;
+ poll_dev->private = ud;
+ poll_dev->poll = ubicom32input_poll;
+
+ /*
+ * Set the poll interval requested, default to 50 msec
+ */
+ if (pdata->poll_interval) {
+ poll_dev->poll_interval = pdata->poll_interval;
+ } else {
+ poll_dev->poll_interval = 50;
+ }
+
+ /*
+ * Setup the input device
+ */
+ input_dev = poll_dev->input;
+ input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input";
+ input_dev->phys = "ubicom32input/input0";
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->id.bustype = BUS_HOST;
+
+ /*
+ * Reserve the GPIOs
+ */
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct ubicom32input_button *ub = &pdata->buttons[i];
+
+ ret = gpio_request(ub->gpio,
+ ub->desc ? ub->desc : "ubicom32input");
+ if (ret < 0) {
+ pr_err("ubicom32input: failed to request "
+ "GPIO %d ret=%d\n", ub->gpio, ret);
+ goto fail2;
+ }
+
+ ret = gpio_direction_input(ub->gpio);
+ if (ret < 0) {
+ pr_err("ubicom32input: failed to set "
+ "GPIO %d to input ret=%d\n", ub->gpio, ret);
+ goto fail2;
+ }
+
+ /*
+ * Set the previous state to the non-active stae
+ */
+ ud->prev_state[i] = ub->active_low;
+
+ input_set_capability(input_dev,
+ ub->type ? ub->type : EV_KEY, ub->code);
+ }
+
+ /*
+ * Register
+ */
+ ret = input_register_polled_device(ud->poll_dev);
+ if (ret) {
+ goto fail2;
+ }
+
+ return 0;
+
+fail2:
+ /*
+ * release the GPIOs we have already requested.
+ */
+ while (--i >= 0) {
+ gpio_free(pdata->buttons[i].gpio);
+ }
+
+fail:
+ printk(KERN_ERR "Ubicom32Input: Failed to register driver %d", ret);
+ platform_set_drvdata(pdev, NULL);
+ input_free_polled_device(poll_dev);
+ kfree(ud);
+ return ret;
+}
+
+/*
+ * ubicom32input_remove
+ */
+static int __devexit ubicom32input_remove(struct platform_device *dev)
+{
+ struct ubicom32input_data *ud =
+ (struct ubicom32input_data *)platform_get_drvdata(dev);
+ int i;
+
+ /*
+ * Free the GPIOs
+ */
+ for (i = 0; i < ud->pdata->nbuttons; i++) {
+ gpio_free(ud->pdata->buttons[i].gpio);
+ }
+
+ platform_set_drvdata(dev, NULL);
+ input_unregister_polled_device(ud->poll_dev);
+ input_free_polled_device(ud->poll_dev);
+
+ kfree(ud);
+
+ return 0;
+}
+
+static struct platform_driver ubicom32input_driver = {
+ .driver = {
+ .name = "ubicom32input",
+ .owner = THIS_MODULE,
+ },
+ .probe = ubicom32input_probe,
+ .remove = __devexit_p(ubicom32input_remove),
+};
+
+/*
+ * ubicom32input_init
+ */
+static int __devinit ubicom32input_init(void)
+{
+ return platform_driver_register(&ubicom32input_driver);
+}
+
+/*
+ * ubicom32input_exit
+ */
+static void __exit ubicom32input_exit(void)
+{
+ platform_driver_unregister(&ubicom32input_driver);
+}
+
+module_init(ubicom32input_init);
+module_exit(ubicom32input_exit);
+
+MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom32 Input Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ubicom32-input");
--- /dev/null
+++ b/arch/ubicom32/mach-common/ubicom32input_i2c.c
@@ -0,0 +1,325 @@
+/*
+ * arch/ubicom32/mach-common/ubicom32input_i2c.c
+ * Ubicom32 Input driver for I2C
+ * Supports PCA953x and family
+ *
+ * We hog the I2C device, turning it all to input.
+ *
+ * Based on gpio-keys, pca953x
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/i2c.h>
+
+#include <asm/ubicom32input_i2c.h>
+
+#define UBICOM32INPUT_I2C_REG_INPUT 0
+#define UBICOM32INPUT_I2C_REG_OUTPUT 1
+#define UBICOM32INPUT_I2C_REG_INVERT 2
+#define UBICOM32INPUT_I2C_REG_DIRECTION 3
+
+static const struct i2c_device_id ubicom32input_i2c_id[] = {
+ { "ubicom32in_pca9534", 8, },
+ { "ubicom32in_pca9535", 16, },
+ { "ubicom32in_pca9536", 4, },
+ { "ubicom32in_pca9537", 4, },
+ { "ubicom32in_pca9538", 8, },
+ { "ubicom32in_pca9539", 16, },
+ { "ubicom32in_pca9554", 8, },
+ { "ubicom32in_pca9555", 16, },
+ { "ubicom32in_pca9557", 8, },
+ { "ubicom32in_max7310", 8, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ubicom32input_i2c_id);
+
+struct ubicom32input_i2c_data {
+ struct ubicom32input_i2c_platform_data *pdata;
+
+ struct i2c_client *client;
+
+ struct input_polled_dev *poll_dev;
+
+ /*
+ * collection of previous states for buttons
+ */
+ uint16_t prev_state;
+
+ uint8_t ngpios;
+};
+
+/*
+ * ubicom32input_i2c_write_reg
+ * writes a register to the I2C device.
+ */
+static int ubicom32input_i2c_write_reg(struct ubicom32input_i2c_data *ud,
+ int reg, uint16_t val)
+{
+ int ret;
+
+ if (ud->ngpios <= 8) {
+ ret = i2c_smbus_write_byte_data(ud->client, reg, val);
+ } else {
+ ret = i2c_smbus_write_word_data(ud->client, reg << 1, val);
+ }
+
+ if (ret < 0) {
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * ubicom32input_i2c_read_reg
+ * reads a register from the I2C device.
+ */
+static int ubicom32input_i2c_read_reg(struct ubicom32input_i2c_data *ud,
+ int reg, uint16_t *val)
+{
+ int ret;
+
+ if (ud->ngpios <= 8) {
+ ret = i2c_smbus_read_byte_data(ud->client, reg);
+ } else {
+ ret = i2c_smbus_read_word_data(ud->client, reg);
+ }
+
+ if (ret < 0) {
+ return ret;
+ }
+
+ *val = (uint16_t)ret;
+
+ return 0;
+}
+
+/*
+ * ubicom32input_i2c_poll
+ */
+static void ubicom32input_i2c_poll(struct input_polled_dev *dev)
+{
+ struct ubicom32input_i2c_data *ud =
+ (struct ubicom32input_i2c_data *)dev->private;
+ struct ubicom32input_i2c_platform_data *pdata = ud->pdata;
+ struct input_dev *id = dev->input;
+ int i;
+ int sync_needed = 0;
+ uint16_t val;
+ uint16_t change_mask;
+
+ /*
+ * Try to get the input status, if we fail, bail out, maybe we can do it
+ * next time.
+ */
+ if (ubicom32input_i2c_read_reg(ud, UBICOM32INPUT_I2C_REG_INPUT, &val)) {
+ return;
+ }
+
+ /*
+ * see if anything changed by using XOR
+ */
+ change_mask = ud->prev_state ^ val;
+ ud->prev_state = val;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
+ uint16_t mask = 1 << ub->bit;
+ int state = val & mask;
+
+ /*
+ * Check to see if the state changed from the last time we
+ * looked
+ */
+ if (!(change_mask & mask)) {
+ continue;
+ }
+ input_event(id, ub->type, ub->code, state);
+ sync_needed = 1;
+ }
+
+ if (sync_needed) {
+ input_sync(id);
+ }
+}
+
+/*
+ * ubicom32input_i2c_probe
+ */
+static int __devinit ubicom32input_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i;
+ struct ubicom32input_i2c_data *ud;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input_dev;
+ struct ubicom32input_i2c_platform_data *pdata;
+ int ret;
+ uint16_t invert_mask = 0;
+
+ pdata = client->dev.platform_data;
+ if (!pdata) {
+ return -EINVAL;
+ }
+
+ ud = kzalloc(sizeof(struct ubicom32input_i2c_data), GFP_KERNEL);
+ if (!ud) {
+ return -ENOMEM;
+ }
+ ud->pdata = pdata;
+ ud->client = client;
+ ud->ngpios = id->driver_data;
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ ud->poll_dev = poll_dev;
+ poll_dev->private = ud;
+ poll_dev->poll = ubicom32input_i2c_poll;
+
+ /*
+ * Set the poll interval requested, default to 100 msec
+ */
+ if (pdata->poll_interval) {
+ poll_dev->poll_interval = pdata->poll_interval;
+ } else {
+ poll_dev->poll_interval = 100;
+ }
+
+ /*
+ * Setup the input device
+ */
+ input_dev = poll_dev->input;
+ input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input I2C";
+ input_dev->phys = "ubicom32input_i2c/input0";
+ input_dev->dev.parent = &client->dev;
+ input_dev->id.bustype = BUS_I2C;
+
+ /*
+ * Set the capabilities
+ */
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct ubicom32input_i2c_button *ub = &pdata->buttons[i];
+
+ if (ub->active_low) {
+ invert_mask |= (1 << ub->bit);
+ }
+
+ input_set_capability(input_dev,
+ ub->type ? ub->type : EV_KEY, ub->code);
+ }
+
+ /*
+ * Setup the device (all inputs)
+ */
+ ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_DIRECTION,
+ 0xFFFF);
+ if (ret < 0) {
+ goto fail;
+ }
+
+ ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_INVERT,
+ invert_mask);
+ if (ret < 0) {
+ goto fail;
+ }
+
+ /*
+ * Register
+ */
+ ret = input_register_polled_device(ud->poll_dev);
+ if (ret) {
+ goto fail;
+ }
+
+ i2c_set_clientdata(client, ud);
+
+ return 0;
+
+fail:
+ printk(KERN_ERR "ubicom32input_i2c: Failed to register driver %d\n",
+ ret);
+ input_free_polled_device(poll_dev);
+ kfree(ud);
+ return ret;
+}
+
+/*
+ * ubicom32input_i2c_remove
+ */
+static int __devexit ubicom32input_i2c_remove(struct i2c_client *client)
+{
+ struct ubicom32input_i2c_data *ud =
+ (struct ubicom32input_i2c_data *)i2c_get_clientdata(client);
+
+ i2c_set_clientdata(client, NULL);
+ input_unregister_polled_device(ud->poll_dev);
+ input_free_polled_device(ud->poll_dev);
+
+ kfree(ud);
+
+ return 0;
+}
+
+static struct i2c_driver ubicom32input_i2c_driver = {
+ .driver = {
+ .name = "ubicom32input_i2c",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(ubicom32input_i2c_remove),
+ .id_table = ubicom32input_i2c_id,
+ .probe = ubicom32input_i2c_probe,
+};
+
+/*
+ * ubicom32input_i2c_init
+ */
+static int __devinit ubicom32input_i2c_init(void)
+{
+ return i2c_add_driver(&ubicom32input_i2c_driver);
+}
+
+/*
+ * ubicom32input_i2c_exit
+ */
+static void __exit ubicom32input_i2c_exit(void)
+{
+ i2c_del_driver(&ubicom32input_i2c_driver);
+}
+
+module_init(ubicom32input_i2c_init);
+module_exit(ubicom32input_i2c_exit);
+
+MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom32 Input Driver I2C");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ubicom32-input");
--- /dev/null
+++ b/arch/ubicom32/mach-common/usb.c
@@ -0,0 +1,133 @@
+/*
+ * arch/ubicom32/mach-common/ip5k_usb.c
+ * Ubicom32 architecture usb support.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can
+ * redistribute it and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software Foundation, either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/musb.h>
+#include <asm/devtree.h>
+#include <asm/ip5000.h>
+#include "usb_tio.h"
+
+struct usbtionode *unode = NULL;
+
+static struct resource usb_resources[] = {
+ [0] = {
+ .start = RJ + 0x800,
+ .end = RJ + 0x1000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = 1, /* this is a dummy value, the real irq number is passed from kernel_setup_param */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct musb_hdrc_eps_bits musb_eps[] = {
+ { "ep1_tx", 4, },
+ { "ep1_rx", 4, },
+ { "ep2_tx", 10, },
+ { "ep2_rx", 10, },
+ { "ep3_tx", 9, },
+ { "ep3_rx", 9, },
+ { "ep4_tx", 9, },
+ { "ep4_rx", 9, },
+ { "ep5_tx", 6, },
+ { "ep5_rx", 6, },
+};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = true,
+ .dyn_fifo = false,
+ .soft_con = true,
+ .dma = false,
+
+ .num_eps = 6,
+ .dma_channels = 0,
+ .ram_bits = 0,
+ .eps_bits = musb_eps,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#else
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ .mode = MUSB_HOST,
+#else
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ .mode = MUSB_PERIPHERAL,
+#endif
+#endif
+#endif
+ .clock = NULL,
+ .set_clock = NULL,
+ .config = &musb_config,
+};
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = 0,
+ .dev = {
+ .platform_data = &usb_data,
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0,
+ },
+ .resource = usb_resources,
+ .num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct usbtio_node *usb_node = NULL;
+void ubi32_usb_init(void)
+{
+ /*
+ * See if the usbtio is in the device tree.
+ */
+ usb_node = (struct usbtio_node *)devtree_find_node("usbtio");
+ if (!usb_node) {
+ printk(KERN_WARNING "usb init failed\n");
+ return;
+ }
+
+ usb_resources[1].start = usb_node->dn.recvirq;
+ if (platform_device_register(&musb_device) < 0) {
+ printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+ return;
+ }
+}
+
+void ubi32_usb_int_clr(void)
+{
+ UBICOM32_IO_PORT(RJ)->int_clr = (1 << 3);
+}
+
--- /dev/null
+++ b/arch/ubicom32/mach-common/usb_tio.c
@@ -0,0 +1,356 @@
+/*
+ * arch/ubicom32/mach-common/usb_tio.c
+ * Linux side Ubicom USB TIO driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <asm/devtree.h>
+#include "usb_tio.h"
+
+#ifdef CONFIG_SMP
+static DEFINE_SPINLOCK(tio_lock);
+#define USB_TIO_LOCK(lock, flag) spin_lock_irqsave(lock, flag)
+#define USB_TIO_UNLOCK(lock, flag) spin_unlock_irqrestore(lock, flag)
+#define USB_TIO_LOCK_ISLOCKED(lock) spin_try_lock(lock)
+#else
+#define USB_TIO_LOCK(lock, flag) local_irq_save(flag)
+#define USB_TIO_UNLOCK(lock, flag) local_irq_restore(flag)
+#endif
+
+spinlock_t usb_tio_lock;
+
+/*
+ * usb_tio_set_hrt_interrupt()
+ */
+static inline void usb_tio_set_hrt_interrupt(void)
+{
+ ubicom32_set_interrupt(usb_node->dn.sendirq);
+}
+
+static inline void usb_tio_wait_hrt(void)
+{
+ while (unlikely(usb_node->pdesc));
+}
+
+#if defined(USB_TIO_DEBUG)
+static void usb_tio_request_verify_magic(volatile struct usb_tio_request *req)
+{
+ BUG_ON(req->magic != USB_TIO_REQUEST_MAGIC2);
+}
+
+static void usb_tio_request_clear_magic(volatile struct usb_tio_request *req)
+{
+ req->magic = 0;
+}
+#endif
+
+static void usb_tio_request_set_magic(volatile struct usb_tio_request *req)
+{
+ req->magic = USB_TIO_REQUEST_MAGIC1;
+}
+
+/*
+ * usb_tio_commit_request()
+ */
+static inline void usb_tio_commit_request(volatile struct usb_tio_request *request)
+{
+ wmb();
+ usb_node->pdesc = request;
+
+ /*
+ * next thing to do is alway checking if (usb_node->pdesc == NULL)
+ * to see if the request is done, so add a mb() here
+ */
+ mb();
+ usb_tio_set_hrt_interrupt();
+}
+
+/*
+ * usb_tio_read_u16()
+ * Synchronously read 16 bits.
+ */
+u8_t usb_tio_read_u16(u32_t address, u16_t *data)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ /*
+ * Fill in the request.
+ */
+ tio_req->address = address;
+ tio_req->cmd = USB_TIO_READ16_SYNC;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+ usb_tio_commit_request(tio_req);
+
+ /*
+ * Wait for the result to show up.
+ */
+ usb_tio_wait_hrt();
+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
+ *data = (u16_t)tio_req->data;
+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_read_u8()
+ * Synchronously read 16 bits.
+ */
+u8_t usb_tio_read_u8(u32_t address, u8_t *data)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ /*
+ * Fill in the request.
+ */
+ tio_req->address = address;
+ tio_req->cmd = USB_TIO_READ8_SYNC;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+
+ /*
+ * Wait for the result to show up.
+ */
+ usb_tio_wait_hrt();
+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
+ *data = (u8_t)tio_req->data;
+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_write_u16()
+ * Asynchronously write 16 bits.
+ */
+u8_t usb_tio_write_u16(u32_t address, u16_t data)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ /*
+ * Wait for any previous write or pending read to complete.
+ */
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ tio_req->address = address;
+ tio_req->data = data;
+ tio_req->cmd = USB_TIO_WRITE16_ASYNC;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_write_u8()
+ * Asynchronously write 8 bits.
+ */
+u8_t usb_tio_write_u8(u32_t address, u8_t data)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ /*
+ * Wait for any previous write or pending read to complete.
+ */
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ tio_req->address = address;
+ tio_req->data = data;
+ tio_req->cmd = USB_TIO_WRITE8_ASYNC;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_read_fifo()
+ * Synchronously read FIFO.
+ */
+u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ /*
+ * Wait for any previous request to complete and then make this request.
+ */
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ /*
+ * Fill in the request.
+ */
+ tio_req->address = address;
+ tio_req->cmd = USB_TIO_READ_FIFO_SYNC;
+ tio_req->buffer = buffer;
+ tio_req->transfer_length = bytes;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+
+ /*
+ * Wait for the result to show up.
+ */
+ usb_tio_wait_hrt();
+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_write_fifo()
+ * Synchronously write 32 bits.
+ */
+u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ tio_req->address = address;
+ tio_req->buffer = buffer;
+ tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
+ tio_req->transfer_length = bytes;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+
+ /*
+ * Wait for the result to show up.
+ */
+ usb_tio_wait_hrt();
+ USB_TIO_REQUEST_VERIFY_MAGIC(tio_req);
+ USB_TIO_REQUEST_CLEAR_MAGIC(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_write_fifo_async()
+ * Asynchronously write 32 bits.
+ */
+u8_t usb_tio_write_fifo_async(u32_t address, u32_t buffer, u32_t bytes)
+{
+ volatile struct usb_tio_request *tio_req = &usb_node->request;
+ unsigned long flag;
+
+ USB_TIO_LOCK(&tio_lock, flag);
+ usb_tio_wait_hrt();
+
+ tio_req->address = address;
+
+ /*
+ * Is it necessary to make a local copy of the buffer? Any chance the URB is aborted before TIO finished the FIFO write?
+ */
+ tio_req->buffer = buffer;
+ tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC;
+ tio_req->transfer_length = bytes;
+ USB_TIO_REQUEST_SET_MAGIC(tio_req);
+ /*
+ * commit the request
+ */
+ usb_tio_commit_request(tio_req);
+ USB_TIO_UNLOCK(&tio_lock, flag);
+ return USB_TIO_OK;
+}
+
+/*
+ * usb_tio_read_int_status()
+ * read and clear the interrupt status registers
+ */
+void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
+{
+
+ /*
+ * clear the interrupt must be syncronized with the TIO thread to prevent the racing condiiton
+ * that TIO thread try to set it at same time
+ */
+ asm volatile (
+ "1: bset (%0), (%0), #0 \n\t" \
+ " jmpne.f 1b \n\t" \
+ :
+ : "a" (&usb_node->usb_vp_control)
+ : "memory", "cc"
+ );
+
+ *int_usb = usb_node->usb_vp_hw_int_usb;
+ *int_tx = cpu_to_le16(usb_node->usb_vp_hw_int_tx);
+ *int_rx = cpu_to_le16(usb_node->usb_vp_hw_int_rx);
+
+ //printk(KERN_INFO "int read %x, %x, %x\n", *int_usb, *int_tx, *int_rx);
+
+ /*
+ * The interrupt status register is read-clean, so clear it now
+ */
+ usb_node->usb_vp_hw_int_usb = 0;
+ usb_node->usb_vp_hw_int_tx = 0;
+ usb_node->usb_vp_hw_int_rx = 0;
+
+ /*
+ * release the lock bit
+ */
+ usb_node->usb_vp_control &= 0xfffe;
+}
--- /dev/null
+++ b/arch/ubicom32/mach-common/usb_tio.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ubicom32/mach-common/usb_tio.h
+ * Definitions for usb_tio.c
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <asm/devtree.h>
+#include <asm/ip5000.h>
+
+#ifndef _USB_TIO_H
+#define _USB_TIO_H
+
+#undef USB_TIO_DEBUG
+
+#define USB_TIO_REQUEST_MAGIC1 0x2307
+#define USB_TIO_REQUEST_MAGIC2 0x0789
+#if defined(USB_TIO_DEBUG)
+#define USB_TIO_REQUEST_VERIFY_MAGIC(req) usb_tio_request_verify_magic(req)
+#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
+#define USB_TIO_REQUEST_CLEAR_MAGIC(req) usb_tio_request_clear_magic(req)
+#else
+#define USB_TIO_REQUEST_VERIFY_MAGIC(req)
+#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req)
+#define USB_TIO_REQUEST_CLEAR_MAGIC(req)
+#endif
+
+enum USB_TIO_status {
+ USB_TIO_OK,
+ USB_TIO_ERROR,
+ USB_TIO_ERROR_COMMIT,
+};
+
+enum USB_TIO_cmds {
+ USB_TIO_READ16_SYNC,
+ USB_TIO_READ8_SYNC,
+ USB_TIO_READ_FIFO_SYNC,
+
+ USB_TIO_WRITE16_ASYNC,
+ USB_TIO_WRITE8_ASYNC,
+ USB_TIO_WRITE_FIFO_ASYNC,
+
+ USB_TIO_WRITE16_SYNC,
+ USB_TIO_WRITE8_SYNC,
+ USB_TIO_WRITE_FIFO_SYNC,
+
+};
+
+enum USB_TIO_state {
+ USB_TIO_NORMAL,
+ USB_TIO_DMA_SETUP,
+};
+
+struct usb_tio_request {
+ volatile u32_t address;
+ union {
+ volatile u32_t data;
+ volatile u32_t buffer;
+ };
+ volatile u16_t cmd;
+ const volatile u16_t status;
+ volatile u32_t transfer_length;
+ volatile u32_t thread_mask;
+ volatile u16_t magic;
+};
+
+struct usbtio_node {
+ struct devtree_node dn;
+ volatile struct usb_tio_request * volatile pdesc;
+ struct usb_tio_request request;
+ volatile u32_t usb_vp_config;
+ volatile u32_t usb_vp_control;
+ const volatile u32_t usb_vp_status;
+ volatile u16_t usb_vp_hw_int_tx;
+ volatile u16_t usb_vp_hw_int_rx;
+ volatile u8_t usb_vp_hw_int_usb;
+ volatile u8_t usb_vp_hw_int_mask_usb;
+ volatile u16_t usb_vp_hw_int_mask_tx;
+ volatile u16_t usb_vp_hw_int_mask_rx;
+
+};
+
+extern struct usbtio_node *usb_node;
+extern void ubi32_usb_init(void);
+#endif
--- /dev/null
+++ b/arch/ubicom32/mach-common/vdc_tio.c
@@ -0,0 +1,111 @@
+/*
+ * arch/ubicom32/mach-common/vdc_tio.c
+ * Generic initialization for VDC
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/devtree.h>
+#include <asm/vdc_tio.h>
+
+/*
+ * Resources that this driver uses
+ */
+static struct resource vdc_tio_resources[] = {
+ /*
+ * Send IRQ
+ */
+ [0] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Receive IRQ (optional)
+ */
+ [1] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Memory Mapped Registers
+ */
+ [2] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/*
+ * The platform_device structure which is passed to the driver
+ */
+static struct platform_device vdc_tio_platform_device = {
+ .name = "ubicom32fb",
+ .id = -1,
+ .resource = vdc_tio_resources,
+ .num_resources = ARRAY_SIZE(vdc_tio_resources),
+};
+
+/*
+ * vdc_tio_init
+ * Checks the device tree and instantiates the driver if found
+ */
+void __init vdc_tio_init(void)
+{
+ /*
+ * Check the device tree for the vdc_tio
+ */
+ struct vdc_tio_node *vdc_node =
+ (struct vdc_tio_node *)devtree_find_node("vdctio");
+ if (!vdc_node) {
+ printk(KERN_WARNING "No vdc_tio found\n");
+ return;
+ }
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ vdc_tio_resources[0].start = vdc_node->dn.sendirq;
+ vdc_tio_resources[1].start = vdc_node->dn.recvirq;
+ vdc_tio_resources[2].start = (u32_t)vdc_node->regs;
+ vdc_tio_resources[2].end = (u32_t)vdc_node->regs +
+ sizeof(struct vdc_tio_vp_regs);
+
+ /*
+ * Try to get the device registered
+ */
+ if (platform_device_register(&vdc_tio_platform_device) < 0) {
+ printk(KERN_WARNING "VDC failed to register\n");
+ }
+}
--- /dev/null
+++ b/arch/ubicom32/mach-ip5k/board-ip5160dev.c
@@ -0,0 +1,110 @@
+/*
+ * arch/ubicom32/mach-ip5k/board-ip5160dev.c
+ * Platform initialization for ip5160dev board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+#include <asm/ubicom32suart.h>
+#endif
+
+/*
+ * Factory Default Button on the board at PXn
+ * TODO: This is just a placeholder and it needs to include proper header files
+ */
+struct ubicom32fdb_platform_data {
+ int fdb_gpio;
+ bool fdb_polarity;
+};
+
+static struct ubicom32fdb_platform_data ip5160dev_fdb_data = {
+ .fdb_gpio = 0,
+ .fdb_polarity = true,
+};
+
+static struct platform_device ip5160dev_fdb_device = {
+ .name = "ubicom32fdb",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip5160dev_fdb_data,
+ },
+};
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+static struct resource ip5160dev_ubicom32_suart_resources[] = {
+ {
+ .start = RD,
+ .end = RD,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PORT_OTHER_INT(RD),
+ .end = PORT_OTHER_INT(RD),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 240000000,
+ .end = 240000000,
+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
+ },
+};
+
+static struct platform_device ip5160dev_ubicom32_suart_device = {
+ .name = "ubicom32suart",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ip5160dev_ubicom32_suart_resources),
+ .resource = ip5160dev_ubicom32_suart_resources,
+};
+#endif
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip5160dev_devices[] __initdata = {
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+ &ip5160dev_ubicom32_suart_device,
+#endif
+ &ip5160dev_fdb_device,
+};
+
+/*
+ * ip5160dev_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip5160dev_init(void)
+{
+ ubi_gpio_init();
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip5160dev_devices, ARRAY_SIZE(ip5160dev_devices));
+ return 0;
+}
+
+arch_initcall(ip5160dev_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip5k/board-ip5160rgw.c
@@ -0,0 +1,76 @@
+/*
+ * arch/ubicom32/mach-ip5k/board-ip5160rgw.c
+ * Platform initialization for ip5160rgw board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/board.h>
+#include <asm/machdep.h>
+
+/*
+ * Factory Default Button on the board at PXn
+ * TODO: This is just a placeholder and it needs to include proper header files
+ */
+struct ubicom32fdb_platform_data {
+ int fdb_gpio;
+ bool fdb_polarity;
+};
+
+static struct ubicom32fdb_platform_data ip5160rgw_fdb_data = {
+ .fdb_gpio = 0,
+ .fdb_polarity = true,
+};
+
+static struct platform_device ip5160rgw_fdb_device = {
+ .name = "ubicom32fdb",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip5160rgw_fdb_data,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip5160rgw_devices[] __initdata = {
+ &ip5160rgw_fdb_device,
+};
+
+/*
+ * ip5160rgw_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip5160rgw_init(void)
+{
+ ubi_gpio_init();
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip5160rgw_devices, ARRAY_SIZE(ip5160rgw_devices));
+ return 0;
+}
+
+arch_initcall(ip5160rgw_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip5k/board-ip5170dpf.c
@@ -0,0 +1,280 @@
+/*
+ * arch/ubicom32/mach-ip5k/board-ip5170dpf.c
+ * Platform initialization for ip5160dpf board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/input.h>
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32hid.h>
+#include <asm/vdc_tio.h>
+
+/*
+ * LEDs
+ *
+ * WLAN PD9 (Note this is shared with MISO, but we don't use it)
+ * WPS PD8
+ *
+ * TODO: check triggers, are they generic?
+ */
+static struct gpio_led ip5170dpf_gpio_leds[] = {
+ {
+ .name = "d31:green:WLAN1",
+ .default_trigger = "WLAN1",
+ .gpio = GPIO_RD_9,
+ .active_low = 1,
+ },
+ {
+ .name = "d30:green:WPS",
+ .default_trigger = "WPS",
+ .gpio = GPIO_RD_8,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ip5170dpf_gpio_led_platform_data = {
+ .num_leds = 2,
+ .leds = ip5170dpf_gpio_leds,
+};
+
+static struct platform_device ip5170dpf_gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip5170dpf_gpio_led_platform_data,
+ },
+};
+
+/*
+ * Backlight on the board PD0, hardware PWM
+ */
+static const struct ubicom32hid_button ip5170dpf_ubicom32hid_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .bit = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .bit = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .bit = 2,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .bit = 3,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .bit = 4,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .bit = 5,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .bit = 7,
+ },
+};
+
+static const struct ubicom32hid_ir ip5170dpf_ubicom32hid_ircodes[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .ir_code = 0xF807916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .ir_code = 0xF20D916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .ir_code = 0xF609916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .ir_code = 0xF40B916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .ir_code = 0xF50A916E
+ },
+ { /* rotate */
+ .type = EV_KEY,
+ .code = KEY_FN_F1,
+ .ir_code = 0xF906916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .ir_code = 0xF708916E
+ },
+ { /* font size */
+ .type = EV_KEY,
+ .code = KEY_FN_F2,
+ .ir_code = 0xF30C916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .ir_code = 0xF10E916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_VOLUMEUP,
+ .ir_code = 0xF00F916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_VOLUMEDOWN,
+ .ir_code = 0xED12916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MUTE,
+ .ir_code = 0xEA15916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_INFO,
+ .ir_code = 0xEF10916E
+ },
+ { /* Like */
+ .type = EV_KEY,
+ .code = KEY_FN_F3,
+ .ir_code = 0xEE11916E
+ },
+ { /* Dislike */
+ .type = EV_KEY,
+ .code = KEY_FN_F4,
+ .ir_code = 0xEB14916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .ir_code = 0xFD02916E
+ },
+};
+
+static struct ubicom32hid_platform_data ip5170dpf_ubicom32hid_platform_data = {
+ .gpio_reset = GPIO_RA_4,
+ .gpio_reset_polarity = 0,
+ .type = UBICOM32HID_BL_TYPE_BINARY,
+ .invert = 0,
+ .default_intensity = 1,
+ .buttons = ip5170dpf_ubicom32hid_buttons,
+ .nbuttons = ARRAY_SIZE(ip5170dpf_ubicom32hid_buttons),
+ .ircodes = ip5170dpf_ubicom32hid_ircodes,
+ .nircodes = ARRAY_SIZE(ip5170dpf_ubicom32hid_ircodes),
+};
+
+/*
+ * Devices on the I2C bus
+ */
+static struct i2c_board_info __initdata ip5170dpf_i2c_board_info[] = {
+ /*
+ * U24, ubicom32hid
+ */
+ {
+ .type = "ubicom32hid",
+ .addr = 0x08,
+ .platform_data = &ip5170dpf_ubicom32hid_platform_data,
+ },
+
+ /*
+ * U14, CS4350 DAC, address 0x4B
+ */
+};
+
+/*
+ * I2C bus on the board, SDA PF13, SCL PF14
+ */
+static struct i2c_gpio_platform_data ip5170dpf_i2c_data = {
+ .sda_pin = GPIO_RF_13,
+ .scl_pin = GPIO_RF_14,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .scl_is_output_only = 1,
+ .udelay = 5,
+};
+
+static struct platform_device ip5170dpf_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip5170dpf_i2c_data,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip5170dpf_devices[] __initdata = {
+ &ip5170dpf_i2c_device,
+ &ip5170dpf_gpio_leds_device,
+};
+
+/*
+ * ip5170dpf_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip5170dpf_init(void)
+{
+ ubi_gpio_init();
+
+ vdc_tio_init();
+
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip5170dpf_devices, ARRAY_SIZE(ip5170dpf_devices));
+
+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
+ i2c_register_board_info(0, ip5170dpf_i2c_board_info, ARRAY_SIZE(ip5170dpf_i2c_board_info));
+
+ return 0;
+}
+
+arch_initcall(ip5170dpf_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip5k/Kconfig
@@ -0,0 +1,32 @@
+
+config IP5170DPF
+ bool "IP5170DPF"
+ select UBICOM32_V3
+ select I2C
+ select I2C_GPIO
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ select UBICOM_HID
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ help
+ IP5170 Digital Picture Frame board, 8005-1113, IP5K-BEV-0011-13 v1.3
+
+config IP5160DEV
+ bool "IP5160Dev_Ver1Dot1"
+ select UBICOM32_V3
+ select BRD_64MB
+ help
+ Ubicom StreamEngine 5000 Development Board, IP5K-BDV-0004-11 v1.1
+
+config IP5160EVAL
+ bool "IP5160RGWEval_Ver2Rev2"
+ select UBICOM32_V3
+ select BRD_32MB
+ help
+ Ubicom StreamEngine 5000 RGW Evaluation Board, IP5K-RGW-0004-11 v2.2
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip5k/Makefile
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/mach-ip5k/Makefile
+# Makefile for boards which have an ip5k on them.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-$(CONFIG_IP5170DPF) += board-ip5170dpf.o
+obj-$(CONFIG_IP5160DEV) += board-ip5160dev.o
+obj-$(CONFIG_IP5160EVAL) += board-ip5160rgw.o
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7145dpf.c
@@ -0,0 +1,716 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7145dpf.c
+ * Board file for IP7145DPF, rev 1.0, P/N 8007-0410
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/input.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32input.h>
+#include <asm/ubicom32input_i2c.h>
+#include <asm/ubicom32bl.h>
+#include <asm/ubicom32lcd.h>
+#include <asm/vdc_tio.h>
+
+#include <asm/ubicom32sd.h>
+#include <asm/sd_tio.h>
+#include <asm/devtree.h>
+#include <asm/audio_tio.h>
+
+#include <asm/ring_tio.h>
+
+/******************************************************************************
+ * SD/IO Port F (Slot 1) platform data
+ */
+static struct resource ip7145dpf_portf_sd_resources[] = {
+ /*
+ * Send IRQ
+ */
+ [0] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Receive IRQ
+ */
+ [1] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Memory Mapped Registers
+ */
+ [2] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct ubicom32sd_card ip7145dpf_portf_sd_cards[] = {
+ [0] = {
+ .pin_wp = IP7145DPF_IOB0,
+ .wp_polarity = 1,
+ .pin_pwr = IP7145DPF_IOB4,
+ .pin_cd = GPIO_RA_4,
+ },
+ [1] = {
+ .pin_wp = IP7145DPF_IOB1,
+ .wp_polarity = 1,
+ .pin_pwr = IP7145DPF_IOB5,
+ .pin_cd = GPIO_RA_6,
+ },
+};
+
+static struct ubicom32sd_platform_data ip7145dpf_portf_sd_platform_data = {
+ .ncards = 2,
+ .cards = ip7145dpf_portf_sd_cards,
+};
+
+static struct platform_device ip7145dpf_portf_sd_device = {
+ .name = "ubicom32sd",
+ .id = 0,
+ .resource = ip7145dpf_portf_sd_resources,
+ .num_resources = ARRAY_SIZE(ip7145dpf_portf_sd_resources),
+ .dev = {
+ .platform_data = &ip7145dpf_portf_sd_platform_data,
+ },
+
+};
+
+/*
+ * ip7145dpf_portf_sd_init
+ */
+static void ip7145dpf_portf_sd_init(void)
+{
+ /*
+ * Check the device tree for the sd_tio
+ */
+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
+ if (!sd_node) {
+ printk(KERN_INFO "PortF SDTIO not found\n");
+ return;
+ }
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ ip7145dpf_portf_sd_resources[0].start = sd_node->dn.sendirq;
+ ip7145dpf_portf_sd_resources[1].start = sd_node->dn.recvirq;
+ ip7145dpf_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
+ ip7145dpf_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
+
+ platform_device_register(&ip7145dpf_portf_sd_device);
+}
+
+/******************************************************************************
+ * SD/IO Port B (Slot 2) platform data
+ */
+static struct resource ip7145dpf_portb_sd_resources[] = {
+ /*
+ * Send IRQ
+ */
+ [0] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Receive IRQ
+ */
+ [1] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Memory Mapped Registers
+ */
+ [2] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct ubicom32sd_card ip7145dpf_portb_sd_cards[] = {
+ [0] = {
+ .pin_wp = IP7145DPF_IOB2,
+ .wp_polarity = 1,
+ .pin_pwr = IP7145DPF_IOB6,
+ .pin_cd = IP7145DPF_IOB3,
+ },
+};
+
+static struct ubicom32sd_platform_data ip7145dpf_portb_sd_platform_data = {
+ .ncards = 1,
+ .cards = ip7145dpf_portb_sd_cards,
+};
+
+static struct platform_device ip7145dpf_portb_sd_device = {
+ .name = "ubicom32sd",
+ .id = 1,
+ .resource = ip7145dpf_portb_sd_resources,
+ .num_resources = ARRAY_SIZE(ip7145dpf_portb_sd_resources),
+ .dev = {
+ .platform_data = &ip7145dpf_portb_sd_platform_data,
+ },
+
+};
+
+/*
+ * ip7145dpf_portb_sd_init
+ */
+static void ip7145dpf_portb_sd_init(void)
+{
+ /*
+ * Check the device tree for the sd_tio
+ */
+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
+ if (!sd_node) {
+ printk(KERN_INFO "PortB SDTIO not found\n");
+ return;
+ }
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ ip7145dpf_portb_sd_resources[0].start = sd_node->dn.sendirq;
+ ip7145dpf_portb_sd_resources[1].start = sd_node->dn.recvirq;
+ ip7145dpf_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
+ ip7145dpf_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
+
+ platform_device_register(&ip7145dpf_portb_sd_device);
+}
+
+
+#ifdef IP7145DPF_USE_MMC_SPI
+/******************************************************************************
+ * SPI over GPIO (MMC_SPI)
+ */
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+#include <asm/ubicom32-spi-gpio.h>
+
+#define MMC_CS GPIO_RF_5 // PF5 D3
+#define MMC_CD GPIO_RA_4 // PA4 CD
+#define MMC_WP IP7145DPF_IOB0 // IOB0 WP
+#define MMC_PWR IP7145DPF_IOB4 // IOB4 PWR
+
+/*
+ * SPI bus over GPIO (for SD card)
+ */
+static struct ubicom32_spi_gpio_platform_data ip7145dpf_spi_gpio_data = {
+ .pin_mosi = GPIO_RF_0, // PF0 CMD
+ .pin_miso = GPIO_RF_2, // PF2 D0
+ .pin_clk = GPIO_RF_1, // PF1 CLK
+ .bus_num = 0, // We'll call this SPI bus 0
+ .num_chipselect = 1, // only one device on this SPI bus
+};
+
+static struct platform_device ip7145dpf_spi_gpio_device = {
+ .name = "ubicom32-spi-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7145dpf_spi_gpio_data,
+ },
+};
+
+/*
+ * ip7145dpf_mmc_spi_setpower_slot_a
+ * Set the power state for slot A
+ */
+static void ip7145dpf_mmc_spi_setpower_slot_a(struct device *dev, unsigned int vdd)
+{
+ struct mmc_spi_platform_data *pd = dev->platform_data;
+
+ /*
+ * Power is inverted, we could tell the IOB to do it, but it's cleaner this way.
+ */
+ if ((1 << vdd) & pd->ocr_mask) {
+ gpio_set_value(MMC_PWR, 0);
+ return;
+ }
+ gpio_set_value(MMC_PWR, 1);
+}
+
+/*
+ * ip7145dpf_mmc_spi_get_cd_slot_a
+ * Get the CD bit for slot A
+ */
+static int ip7145dpf_mmc_spi_get_cd_slot_a(struct device *dev)
+{
+ /*
+ * Note that the sense of the GPIO is inverted
+ */
+ return !gpio_get_value(MMC_CD);
+}
+
+/*
+ * ip7145dpf_mmc_spi_get_ro_slot_a
+ * Get the WP bit for slot A
+ */
+static int ip7145dpf_mmc_spi_get_ro_slot_a(struct device *dev)
+{
+ /*
+ * Note that the sense of the GPIO is inverted, we could tell the IOB to do it, but
+ * it's clearer this way.
+ */
+ return !gpio_get_value(MMC_WP);
+}
+
+/*
+ * ip7145dpf_mmc_spi_exit_slot_a
+ * Free the appropriate GPIOs for slot A SD slot.
+ */
+static void ip7145dpf_mmc_spi_exit_slot_a(struct device *dev, void *appdata)
+{
+ gpio_free(MMC_CD);
+ gpio_free(MMC_CS);
+ gpio_free(MMC_WP);
+ gpio_free(MMC_PWR);
+ platform_device_unregister(&ip7145dpf_spi_gpio_device);
+}
+
+/*
+ * ip7145dpf_mmc_spi_init_slot_a
+ * Allocate the appropriate GPIOs for slot A SD slot.
+ * WP is on IOB0, CD is PA4, CS is on PF5
+ * TODO: make CD an interrupt
+ */
+static int ip7145dpf_mmc_spi_init_slot_a(void)
+{
+ int ret = gpio_request(MMC_CD, "mmc-a-cd");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request mmc-a-cd pin\n", __FUNCTION__);
+ return -ENOSYS;
+ }
+ gpio_direction_input(MMC_CD);
+
+ ret = gpio_request(MMC_CS, "mmc-a-cs");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request mmc-a-cs pin\n", __FUNCTION__);
+ goto no_cs;
+ }
+ gpio_direction_output(MMC_CS, 0);
+
+ ret = gpio_request(MMC_WP, "mmc-a-wp");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request mmc-a-wp pin\n", __FUNCTION__);
+ goto no_wp;
+ }
+ gpio_direction_input(MMC_WP);
+
+ /*
+ * Start off with power off
+ */
+ ret = gpio_request(MMC_PWR, "mmc-a-pwr");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request mmc-a-pwr pin\n", __FUNCTION__);
+ goto no_pwr;
+ }
+ ret = gpio_direction_output(MMC_PWR, 1);
+
+ return 0;
+
+no_pwr:
+ gpio_free(MMC_WP);
+
+no_wp:
+ gpio_free(MMC_CS);
+
+no_cs:
+ gpio_free(MMC_CD);
+ return -ENOSYS;
+}
+
+/*
+ * MMC_SPI driver (currently bitbang)
+ */
+static struct mmc_spi_platform_data ip7145dpf_mmc_platform_data = {
+ .ocr_mask = MMC_VDD_33_34,
+ .exit = ip7145dpf_mmc_spi_exit_slot_a,
+ .get_ro = ip7145dpf_mmc_spi_get_ro_slot_a,
+ .get_cd = ip7145dpf_mmc_spi_get_cd_slot_a,
+
+ .setpower = ip7145dpf_mmc_spi_setpower_slot_a,
+ .powerup_msecs = 500,
+
+ .detect_delay = 100,
+
+ .caps = MMC_CAP_NEEDS_POLL,
+};
+
+static struct ubicom32_spi_gpio_controller_data ip7145dpf_mmc_controller_data = {
+ .pin_cs = MMC_CS,
+};
+
+static struct spi_board_info ip7145dpf_spi_board_info[] = {
+ {
+ .modalias = "mmc_spi",
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 2000000,
+ .platform_data = &ip7145dpf_mmc_platform_data,
+ .controller_data = &ip7145dpf_mmc_controller_data,
+ }
+};
+#endif /* IP7145DPF_USE_MMC_SPI */
+
+/*
+ * ip7145dpf_u72_setup
+ * Called by I2C to tell us that u72 is setup.
+ *
+ * This function is called by I2C to tell us that u72 has been setup. All
+ * devices which rely on this chip being initialized (or even present) need to
+ * be initialized in this function otherwise they may get initialized too early.
+ *
+ * Currently the only device depending on u72 is the SPI
+ */
+static int __init ip7145dpf_u72_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
+{
+#ifdef IP7145DPF_USE_MMC_SPI
+ if (ip7145dpf_mmc_spi_init_slot_a()) {
+ printk(KERN_ERR "%s: could not request mmc resources\n", __FUNCTION__);
+ } else {
+ printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
+ spi_register_board_info(ip7145dpf_spi_board_info, ARRAY_SIZE(ip7145dpf_spi_board_info));
+ platform_device_register(&ip7145dpf_spi_gpio_device);
+ }
+#else
+ /*
+ * Initialize the Port F/Port B SD slots
+ */
+ ip7145dpf_portf_sd_init();
+ ip7145dpf_portb_sd_init();
+#endif
+ return 0;
+}
+
+/******************************************************************************
+ * LCD VGH on the board at PE6
+ */
+static struct ubicom32lcd_platform_data ip7145dpf_lcd_data = {
+ .vgh_gpio = GPIO_RE_6,
+ .vgh_polarity = true,
+};
+
+static struct platform_device ip7145dpf_lcd_device = {
+ .name = "ubicom32lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7145dpf_lcd_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight on the board PD0, hardware PWM
+ */
+static struct ubicom32bl_platform_data ip7145dpf_backlight_data = {
+ .type = UBICOM32BL_TYPE_PWM,
+ .pwm_channel = 2,
+ .pwm_prescale = 15,
+ .pwm_period = 60,
+ .default_intensity = 0x80,
+};
+
+static struct platform_device ip7145dpf_backlight_device = {
+ .name = "ubicom32bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7145dpf_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * Ubicom32Input on I2C, U48 MAX7310, address 0x18, 8 bits
+ */
+static struct ubicom32input_i2c_button ip7145dpf_ubicom32input_i2c_u48_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .bit = 0,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .bit = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .bit = 2,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .bit = 3,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .bit = 4,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .bit = 5,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .bit = 6,
+ .active_low = 1,
+ },
+};
+
+static struct ubicom32input_i2c_platform_data ip7145dpf_ubicom32input_i2c_u48_platform_data = {
+ .buttons = ip7145dpf_ubicom32input_i2c_u48_buttons,
+ .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_i2c_u48_buttons),
+ .name = "Ubicom32 Input I2C U48",
+};
+
+/******************************************************************************
+ * Additional GPIO chips
+ */
+static struct pca953x_platform_data ip7145dpf_gpio_u72_platform_data = {
+ .gpio_base = IP7145DPF_U72_BASE,
+ .setup = ip7145dpf_u72_setup,
+};
+
+/******************************************************************************
+ * Devices on the I2C bus
+ */
+static struct i2c_board_info __initdata ip7145dpf_i2c_board_info[] = {
+ /*
+ * U51, S35390A RTC, address 0x30
+ */
+ {
+ .type = "s35390a",
+ .addr = 0x30,
+ },
+
+ /*
+ * U48, MAX7310 IO expander, 8 bits, address 0x18
+ */
+ {
+ .type = "ubicom32in_max7310",
+ .addr = 0x18,
+ .platform_data = &ip7145dpf_ubicom32input_i2c_u48_platform_data,
+ },
+
+ /*
+ * U72, MAX7310 IOB expander, 8 bits, address 0x19
+ */
+ {
+ .type = "max7310",
+ .addr = 0x19,
+ .platform_data = &ip7145dpf_gpio_u72_platform_data,
+ },
+};
+
+/*
+ * I2C bus on the board, SDA PE1, SCL PE2
+ */
+static struct i2c_gpio_platform_data ip7145dpf_i2c_data = {
+ .sda_pin = GPIO_RE_1,
+ .scl_pin = GPIO_RE_2,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+};
+
+static struct platform_device ip7145dpf_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7145dpf_i2c_data,
+ },
+};
+
+/******************************************************************************
+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
+ *
+ * WPS PF12
+ * FACT_DEFAULT PF13
+ * POWER PE4
+ *
+ * Not sutable for the keypad buttons since those run on I2C GPIO. The polling
+ * of ubicom32input would seem to be excessive for this.
+ *
+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
+ */
+static struct ubicom32input_button ip7145dpf_ubicom32input_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F1,
+ .gpio = GPIO_RF_12,
+ .desc = "WPS",
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F2,
+ .gpio = GPIO_RF_13,
+ .desc = "Factory Default",
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = GPIO_RE_4,
+ .desc = "Power",
+ .active_low = 1,
+ },
+};
+
+static struct ubicom32input_platform_data ip7145dpf_ubicom32input_data = {
+ .buttons = ip7145dpf_ubicom32input_buttons,
+ .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_buttons),
+};
+
+static struct platform_device ip7145dpf_ubicom32input_device = {
+ .name = "ubicom32input",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7145dpf_ubicom32input_data,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7145dpf_devices[] __initdata = {
+ &ip7145dpf_i2c_device,
+ &ip7145dpf_lcd_device,
+ &ip7145dpf_backlight_device,
+ &ip7145dpf_ubicom32input_device,
+};
+
+/*
+ * ip7145dpf_power_off
+ * Called to turn the power off for this board
+ */
+static void ip7145dpf_power_off(void)
+{
+ gpio_set_value(GPIO_RE_5, 0);
+}
+
+/*
+ * ip7145dpf_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7145dpf_init(void)
+{
+ int ret;
+ struct platform_device *audio_dev;
+
+ ubi_gpio_init();
+
+#ifdef CONFIG_UIO_UBICOM32RING
+ ring_tio_init("decoder_ring");
+#endif
+
+ /*
+ * Start up the video driver first
+ */
+ vdc_tio_init();
+
+ /*
+ * Take over holding of the power from the system
+ */
+ ret = gpio_request(GPIO_RE_5, "power_hold");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request power hold GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RE_5, 1);
+ mach_power_off = ip7145dpf_power_off;
+
+ /*
+ * USB SEL_HOST_USB line
+ */
+ ret = gpio_request(GPIO_RF_11, "SEL_HOST_USB");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RF_11, 0);
+
+ /*
+ * Setup audio
+ */
+ audio_dev = audio_tio_alloc("snd-ubi32-generic", "audiotio-i2sout", 0);
+ if (audio_dev) {
+ platform_device_register(audio_dev);
+ }
+
+ /*
+ * Register all of the devices we have on this board
+ */
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7145dpf_devices, ARRAY_SIZE(ip7145dpf_devices));
+
+ /*
+ * Register all of the devices which sit on the I2C bus
+ */
+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
+ i2c_register_board_info(0, ip7145dpf_i2c_board_info, ARRAY_SIZE(ip7145dpf_i2c_board_info));
+
+ /*
+ * We have to initialize the SPI after the I2C IOB gets setup. SPI is initialized in
+ * ip7145dpf_u72_setup
+ */
+
+ return 0;
+}
+
+arch_initcall(ip7145dpf_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7160bringup.c
@@ -0,0 +1,135 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7160bringup.c
+ * Support for the IP7160 bringup board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32input.h>
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+#include <asm/ubicom32suart.h>
+#endif
+
+/*
+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
+ *
+ * WPS PD5
+ * FACT_DEFAULT PD6
+ *
+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
+ */
+static struct ubicom32input_button ip7160bringup_ubicom32input_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F1,
+ .gpio = GPIO_RD_5,
+ .desc = "WPS",
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F2,
+ .gpio = GPIO_RD_6,
+ .desc = "Factory Default",
+ .active_low = 1,
+ },
+};
+
+static struct ubicom32input_platform_data ip7160bringup_ubicom32input_data = {
+ .buttons = ip7160bringup_ubicom32input_buttons,
+ .nbuttons = ARRAY_SIZE(ip7160bringup_ubicom32input_buttons),
+};
+
+static struct platform_device ip7160bringup_ubicom32input_device = {
+ .name = "ubicom32input",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7160bringup_ubicom32input_data,
+ },
+};
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+static struct resource ip7160bringup_ubicom32_suart_resources[] = {
+ {
+ .start = RE,
+ .end = RE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PORT_OTHER_INT(RE),
+ .end = PORT_OTHER_INT(RE),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 250000000,
+ .end = 250000000,
+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
+ },
+};
+
+static struct platform_device ip7160bringup_ubicom32_suart_device = {
+ .name = "ubicom32suart",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ip7160bringup_ubicom32_suart_resources),
+ .resource = ip7160bringup_ubicom32_suart_resources,
+};
+#endif
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7160bringup_devices[] __initdata = {
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+ &ip7160bringup_ubicom32_suart_device,
+#endif
+ &ip7160bringup_ubicom32input_device,
+};
+
+/*
+ * ip7160bringup_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7160bringup_init(void)
+{
+ board_init();
+
+ ubi_gpio_init();
+
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7160bringup_devices, ARRAY_SIZE(ip7160bringup_devices));
+
+ return 0;
+}
+
+arch_initcall(ip7160bringup_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7160dpf.c
@@ -0,0 +1,327 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7160dpf.c
+ * Platform initialization for ip7160dpf board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/input.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32hid.h>
+#include <asm/vdc_tio.h>
+#include <asm/audio_tio.h>
+
+/*
+ * Backlight on the board PD0, hardware PWM
+ */
+static const struct ubicom32hid_button ip7160dpf_ubicom32hid_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .bit = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .bit = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .bit = 2,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .bit = 3,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .bit = 4,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .bit = 5,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .bit = 7,
+ },
+};
+
+static const struct ubicom32hid_ir ip7160dpf_ubicom32hid_ircodes[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .ir_code = 0xF807916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .ir_code = 0xF20D916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .ir_code = 0xF609916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .ir_code = 0xF40B916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .ir_code = 0xF50A916E
+ },
+ { /* rotate */
+ .type = EV_KEY,
+ .code = KEY_FN_F1,
+ .ir_code = 0xF906916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .ir_code = 0xF708916E
+ },
+ { /* font size */
+ .type = EV_KEY,
+ .code = KEY_FN_F2,
+ .ir_code = 0xF30C916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .ir_code = 0xF10E916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_VOLUMEUP,
+ .ir_code = 0xF00F916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_VOLUMEDOWN,
+ .ir_code = 0xED12916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MUTE,
+ .ir_code = 0xEA15916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_INFO,
+ .ir_code = 0xEF10916E
+ },
+ { /* Like */
+ .type = EV_KEY,
+ .code = KEY_FN_F3,
+ .ir_code = 0xEE11916E
+ },
+ { /* Dislike */
+ .type = EV_KEY,
+ .code = KEY_FN_F4,
+ .ir_code = 0xEB14916E
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .ir_code = 0xFD02916E
+ },
+};
+
+static struct ubicom32hid_platform_data ip7160dpf_ubicom32hid_platform_data = {
+ .gpio_reset = GPIO_RI_5,
+ .gpio_reset_polarity = 0,
+ .type = UBICOM32HID_BL_TYPE_PWM,
+ .invert = 0,
+ .default_intensity = 128,
+ .buttons = ip7160dpf_ubicom32hid_buttons,
+ .nbuttons = ARRAY_SIZE(ip7160dpf_ubicom32hid_buttons),
+ .ircodes = ip7160dpf_ubicom32hid_ircodes,
+ .nircodes = ARRAY_SIZE(ip7160dpf_ubicom32hid_ircodes),
+};
+
+/*
+ * Devices on the I2C bus
+ * This board has a "bus 2" which is isolated from the main bus by U47
+ * and pin RI0. It should be safe to always enable bus 2 by setting
+ * RI0 to low, however, it should be noted that on all existing configurations
+ * of this board, U49 and U51 are not populated.
+ */
+static struct i2c_board_info __initdata ip7160dpf_i2c_board_info[] = {
+ /*
+ * U37, CS4350 DAC, address 0x4B, bus 2
+ * THIS ENTRY MUST BE FIRST
+ */
+ {
+ .type = "cs4350",
+ .addr = 0x4B,
+ }
+
+ /*
+ * U24, ubicom32hid
+ */
+ {
+ .type = "ubicom32hid",
+ .addr = 0x08,
+ .platform_data = &ip7160dpf_ubicom32hid_platform_data,
+ },
+
+ /*
+ * U49, ISL29001 Ambient Light Sensor, address 0x44, bus 2 (may not be stuffed)
+ */
+
+ /*
+ * U51, S35390A RTC, address 0x30, bus 2 (may not be stuffed)
+ */
+#ifdef CONFIG_RTC_DRV_S35390A
+ {
+ .type = "s35390a",
+ .addr = 0x30,
+ },
+#endif
+};
+
+/*
+ * I2C bus on the board, SDA PI1, SCL PI2
+ */
+static struct i2c_gpio_platform_data ip7160dpf_i2c_data = {
+ .sda_pin = GPIO_RI_1,
+ .scl_pin = GPIO_RI_2,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .scl_is_output_only = 1,
+ .udelay = 6,
+};
+
+static struct platform_device ip7160dpf_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7160dpf_i2c_data,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7160dpf_devices[] __initdata = {
+ &ip7160dpf_i2c_device,
+};
+
+/*
+ * ip7160dpf_power_off
+ * Called to turn the power off for this board
+ */
+static void ip7160dpf_power_off(void)
+{
+ gpio_set_value(GPIO_RF_14, 0);
+}
+
+/*
+ * ip7160dpf_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7160dpf_init(void)
+{
+ int ret;
+ struct platform_device *audio_dev;
+
+ ubi_gpio_init();
+
+ /*
+ * Hold the POWER_HOLD line
+ */
+ ret = gpio_request(GPIO_RF_14, "POWER_HOLD");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RF_14, 0);
+ mach_power_off = ip7160dpf_power_off;
+
+ /*
+ * USB SEL_HOST_USB line
+ */
+ ret = gpio_request(GPIO_RI_13, "SEL_HOST_USB");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RI_13, 0);
+
+ /*
+ * USB/DAC nRESET line
+ */
+ ret = gpio_request(GPIO_RI_3, "USB_DAC_nRESET");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request USB_DAC_nRESET GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RI_3, 0);
+ udelay(1);
+ gpio_direction_output(GPIO_RI_3, 1);
+
+ /*
+ * I2C BUS2 Disable line
+ */
+ ret = gpio_request(GPIO_RI_0, "DISABLE_BUS2");
+ if (ret) {
+ printk(KERN_ERR "%s: could not request DISABLE_BUS2 GPIO\n", __FUNCTION__);
+ }
+ gpio_direction_output(GPIO_RI_0, 0);
+
+ vdc_tio_init();
+
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7160dpf_devices, ARRAY_SIZE(ip7160dpf_devices));
+
+ /*
+ * Allocate the audio driver if we can
+ */
+ audio_dev = audio_tio_alloc("snd-ubi32-cs4350", "audiotio-i2sout", 0);
+ if (audio_dev) {
+ ip7160dpf_i2c_board_info[0].platform_data = audio_dev;
+ }
+
+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
+ i2c_register_board_info(0, ip7160dpf_i2c_board_info, ARRAY_SIZE(ip7160dpf_i2c_board_info));
+
+ return 0;
+}
+
+arch_initcall(ip7160dpf_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7160rgw.c
@@ -0,0 +1,255 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7160rgw.c
+ * Platform initialization for ip7160rgw board.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32input.h>
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+#include <asm/ubicom32suart.h>
+#endif
+
+#include <asm/ubicom32-spi-gpio.h>
+#include <asm/switch-bcm539x.h>
+
+/*
+ * SPI bus over GPIO for Gigabit Ethernet Switch
+ * U58:
+ * MOSI PE0
+ * MISO PE1
+ * CLK PE3
+ * CS PE2
+ */
+static struct ubicom32_spi_gpio_platform_data ip7160rgw_spi_gpio_data = {
+ .pin_mosi = GPIO_RE_0,
+ .pin_miso = GPIO_RE_1,
+ .pin_clk = GPIO_RE_3,
+ .bus_num = 0, // We'll call this SPI bus 0
+ .num_chipselect = 1, // only one device on this SPI bus
+ .clk_default = 1,
+};
+
+static struct platform_device ip7160rgw_spi_gpio_device = {
+ .name = "ubicom32-spi-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7160rgw_spi_gpio_data,
+ },
+};
+
+static struct ubicom32_spi_gpio_controller_data ip7160rgw_bcm539x_controller_data = {
+ .pin_cs = GPIO_RE_2,
+};
+
+static struct switch_bcm539x_platform_data ip7160rgw_bcm539x_platform_data = {
+ .flags = SWITCH_BCM539X_FLAG_HW_RESET,
+ .pin_cs = GPIO_RE_2,
+ .pin_reset = GPIO_RE_4,
+ .name = "bcm539x",
+};
+
+static struct spi_board_info ip7160rgw_spi_board_info[] = {
+ {
+ .modalias = "bcm539x-spi",
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 2000000,
+ .platform_data = &ip7160rgw_bcm539x_platform_data,
+ .controller_data = &ip7160rgw_bcm539x_controller_data,
+ .mode = SPI_MODE_3,
+ }
+};
+
+/*
+ * LEDs
+ *
+ * WLAN1 PD0 (PWM capable)
+ * WLAN2 PD1
+ * USB2.0 PD2
+ * Status PD3
+ * WPS PD4
+ *
+ * TODO: check triggers, are they generic?
+ */
+static struct gpio_led ip7160rgw_gpio_leds[] = {
+ {
+ .name = "d53:green:WLAN1",
+ .default_trigger = "WLAN1",
+ .gpio = GPIO_RD_0,
+ .active_low = 1,
+ },
+ {
+ .name = "d54:green:WLAN2",
+ .default_trigger = "WLAN2",
+ .gpio = GPIO_RD_1,
+ .active_low = 1,
+ },
+ {
+ .name = "d55:green:USB",
+ .default_trigger = "USB",
+ .gpio = GPIO_RD_2,
+ .active_low = 1,
+ },
+ {
+ .name = "d56:green:Status",
+ .default_trigger = "Status",
+ .gpio = GPIO_RD_3,
+ .active_low = 1,
+ },
+ {
+ .name = "d57:green:WPS",
+ .default_trigger = "WPS",
+ .gpio = GPIO_RD_4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ip7160rgw_gpio_led_platform_data = {
+ .num_leds = 5,
+ .leds = ip7160rgw_gpio_leds,
+};
+
+static struct platform_device ip7160rgw_gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7160rgw_gpio_led_platform_data,
+ },
+};
+
+/*
+ * Use ubicom32input driver to monitor the various pushbuttons on this board.
+ *
+ * WPS PD5
+ * FACT_DEFAULT PD6
+ *
+ * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default
+ */
+static struct ubicom32input_button ip7160rgw_ubicom32input_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F1,
+ .gpio = GPIO_RD_5,
+ .desc = "WPS",
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_FN_F2,
+ .gpio = GPIO_RD_6,
+ .desc = "Factory Default",
+ .active_low = 1,
+ },
+};
+
+static struct ubicom32input_platform_data ip7160rgw_ubicom32input_data = {
+ .buttons = ip7160rgw_ubicom32input_buttons,
+ .nbuttons = ARRAY_SIZE(ip7160rgw_ubicom32input_buttons),
+};
+
+static struct platform_device ip7160rgw_ubicom32input_device = {
+ .name = "ubicom32input",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7160rgw_ubicom32input_data,
+ },
+};
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+static struct resource ip7160rgw_ubicom32_suart_resources[] = {
+ {
+ .start = RE,
+ .end = RE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PORT_OTHER_INT(RE),
+ .end = PORT_OTHER_INT(RE),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 250000000,
+ .end = 250000000,
+ .flags = UBICOM32_SUART_IORESOURCE_CLOCK,
+ },
+};
+
+static struct platform_device ip7160rgw_ubicom32_suart_device = {
+ .name = "ubicom32suart",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ip7160rgw_ubicom32_suart_resources),
+ .resource = ip7160rgw_ubicom32_suart_resources,
+};
+#endif
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7160rgw_devices[] __initdata = {
+#ifdef CONFIG_SERIAL_UBI32_SERDES
+ &ip7160rgw_ubicom32_suart_device,
+#endif
+ &ip7160rgw_ubicom32input_device,
+ &ip7160rgw_gpio_leds_device,
+ &ip7160rgw_spi_gpio_device,
+};
+
+/*
+ * ip7160rgw_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7160rgw_init(void)
+{
+ board_init();
+
+ /*
+ * Rev 1.2 boards have spi in a different place than 1.1/1.0
+ */
+ if (strcmp(board_get_revision(), "1.2") == 0) {
+ ip7160rgw_spi_gpio_data.pin_mosi = GPIO_RD_7;
+ }
+
+ ubi_gpio_init();
+
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7160rgw_devices, ARRAY_SIZE(ip7160rgw_devices));
+
+ printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__);
+ spi_register_board_info(ip7160rgw_spi_board_info, ARRAY_SIZE(ip7160rgw_spi_board_info));
+
+ return 0;
+}
+
+arch_initcall(ip7160rgw_init);
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7500av.c
@@ -0,0 +1,167 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7500av.c
+ * Support for IP7500 Audio Video Board + CPU module board.
+ *
+ * This file supports the IP7500 Audio Video Board:
+ * 8007-0810 Rev 1.0
+ * with one of the following CPU module boards:
+ * 8007-0510 Rev 1.0
+ * 8007-0510A Rev 1.0 (with ethernet)
+ *
+ * DIP Switch SW2 configuration: (*) default
+ * POS 1: on(*) = PCI enabled, off = PCI disabled
+ * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
+ * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
+ * POS 4: unused
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ring_tio.h>
+#include <asm/vdc_tio.h>
+#include <asm/audio_tio.h>
+#include <asm/ubi32-cs4384.h>
+
+/******************************************************************************
+ * Devices on the I2C bus
+ *
+ * BEWARE of changing the order of things in this array as we depend on
+ * certain things to be in certain places.
+ */
+static struct i2c_board_info __initdata ip7500av_i2c_board_info[] = {
+ /*
+ * U6, CS4384 DAC, address 0x19
+ */
+ {
+ .type = "cs4384",
+ .addr = 0x19,
+ },
+};
+
+/*
+ * I2C bus on the board, SDA PD1, SCL PD2
+ */
+static struct i2c_gpio_platform_data ip7500av_i2c_data = {
+ .sda_pin = GPIO_RD_6,
+ .scl_pin = GPIO_RD_3,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .udelay = 50,
+};
+
+static struct platform_device ip7500av_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7500av_i2c_data,
+ },
+};
+
+/*
+ * List of possible mclks we can generate. This depends on the CPU frequency.
+ */
+static struct ubi32_cs4384_mclk_entry ip7500av_cs4384_mclk_entries[] = {
+ {
+ .rate = 12288000,
+ .div = 44,
+ },
+ {
+ .rate = 11289600,
+ .div = 48,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7500av_devices[] __initdata = {
+ &ip7500av_i2c_device,
+};
+
+/*
+ * ip7500av_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7500av_init(void)
+{
+ struct platform_device *audio_dev;
+ struct platform_device *audio_dev2;
+ struct ubi32_cs4384_platform_data *cs4384_pd;
+
+ board_init();
+
+ vdc_tio_init();
+
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7500av_devices, ARRAY_SIZE(ip7500av_devices));
+
+ /*
+ * CS4384 DAC
+ */
+ audio_dev = audio_tio_alloc("snd-ubi32-cs4384", "audiotio-i2sout",
+ sizeof(struct ubi32_cs4384_platform_data));
+ if (audio_dev) {
+ /*
+ * Attempt to figure out a good divisor. This will only work
+ * assuming the core frequency is compatible.
+ */
+ int i;
+ unsigned int freq = processor_frequency();
+ for (i = 0; i < ARRAY_SIZE(ip7500av_cs4384_mclk_entries); i++) {
+ unsigned int div;
+ unsigned int rate = ip7500av_cs4384_mclk_entries[i].rate / 1000;
+ div = ((freq / rate) + 500) / 1000;
+ ip7500av_cs4384_mclk_entries[i].div = div;
+ printk("CS4384 mclk %d rate %u000Hz div %u act %u\n", i, rate, div, freq / div);
+ }
+
+ cs4384_pd = audio_tio_priv(audio_dev);
+ cs4384_pd->mclk_src = UBI32_CS4384_MCLK_PWM_0;
+ cs4384_pd->n_mclk = ARRAY_SIZE(ip7500av_cs4384_mclk_entries);
+ cs4384_pd->mclk_entries = ip7500av_cs4384_mclk_entries;
+ ip7500av_i2c_board_info[0].platform_data = audio_dev;
+ }
+
+ /*
+ * SPDIF port
+ */
+ audio_dev2 = audio_tio_alloc("snd-ubi32-generic", "audiotio-spdifout", 0);
+ if (audio_dev2) {
+ platform_device_register(audio_dev2);
+ }
+
+ /*
+ * Register all of the devices which sit on the I2C bus
+ */
+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
+ i2c_register_board_info(0, ip7500av_i2c_board_info, ARRAY_SIZE(ip7500av_i2c_board_info));
+
+ ubi_gpio_init();
+
+ return 0;
+}
+arch_initcall(ip7500av_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7500media.c
@@ -0,0 +1,520 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7500media.c
+ * Board file for IP7500 media board.
+ *
+ * Supports the following configuration
+ * CPU Module:
+ * P/N 8007-0510 rev 1.0
+ * DIP Switch SW2 configuration:
+ * POS 1: on = PCI enabled
+ * POS 2: off = TTYX => PF12
+ * POS 3: off = TTYY => PF15
+ * POS 4: unused
+ * Media Board:
+ * P/N 8007-0610 rev 1.0
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/input.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ubicom32input_i2c.h>
+#include <asm/ubicom32bl.h>
+#include <asm/ubicom32lcd.h>
+#include <asm/vdc_tio.h>
+
+#include <asm/ubicom32sd.h>
+#include <asm/sd_tio.h>
+#include <asm/devtree.h>
+#include <asm/audio_tio.h>
+
+#include <asm/ring_tio.h>
+
+/******************************************************************************
+ * SD/IO Port F (Slot 1) platform data
+ */
+static struct resource ip7500media_portf_sd_resources[] = {
+ /*
+ * Send IRQ
+ */
+ [0] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Receive IRQ
+ */
+ [1] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Memory Mapped Registers
+ */
+ [2] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct ubicom32sd_card ip7500media_portf_sd_cards[] = {
+ [0] = {
+ .pin_wp = IP7500MEDIA_IO16,
+ .wp_polarity = 1,
+ .pin_pwr = IP7500MEDIA_IO20,
+ .pin_cd = IP7500MEDIA_IO23,
+ },
+ [1] = {
+ .pin_wp = IP7500MEDIA_IO17,
+ .wp_polarity = 1,
+ .pin_pwr = IP7500MEDIA_IO21,
+ .pin_cd = IP7500MEDIA_IO24,
+ },
+};
+
+static struct ubicom32sd_platform_data ip7500media_portf_sd_platform_data = {
+ .ncards = 2,
+ .cards = ip7500media_portf_sd_cards,
+};
+
+static struct platform_device ip7500media_portf_sd_device = {
+ .name = "ubicom32sd",
+ .id = 0,
+ .resource = ip7500media_portf_sd_resources,
+ .num_resources = ARRAY_SIZE(ip7500media_portf_sd_resources),
+ .dev = {
+ .platform_data = &ip7500media_portf_sd_platform_data,
+ },
+
+};
+
+/*
+ * ip7500media_portf_sd_init
+ */
+static void ip7500media_portf_sd_init(void)
+{
+ /*
+ * Check the device tree for the sd_tio
+ */
+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd");
+ if (!sd_node) {
+ printk(KERN_INFO "PortF SDTIO not found\n");
+ return;
+ }
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ ip7500media_portf_sd_resources[0].start = sd_node->dn.sendirq;
+ ip7500media_portf_sd_resources[1].start = sd_node->dn.recvirq;
+ ip7500media_portf_sd_resources[2].start = (u32_t)&(sd_node->regs);
+ ip7500media_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
+
+ platform_device_register(&ip7500media_portf_sd_device);
+}
+
+/******************************************************************************
+ * SD/IO Port B (Slot 2) platform data
+ */
+static struct resource ip7500media_portb_sd_resources[] = {
+ /*
+ * Send IRQ
+ */
+ [0] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Receive IRQ
+ */
+ [1] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /*
+ * Memory Mapped Registers
+ */
+ [2] = {
+ /*
+ * The init routine will query the devtree and fill this in
+ */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct ubicom32sd_card ip7500media_portb_sd_cards[] = {
+ [0] = {
+ .pin_wp = IP7500MEDIA_IO19,
+ .wp_polarity = 1,
+ .pin_pwr = IP7500MEDIA_IO22,
+ .pin_cd = IP7500MEDIA_IO18,
+ },
+};
+
+static struct ubicom32sd_platform_data ip7500media_portb_sd_platform_data = {
+ .ncards = 1,
+ .cards = ip7500media_portb_sd_cards,
+};
+
+static struct platform_device ip7500media_portb_sd_device = {
+ .name = "ubicom32sd",
+ .id = 1,
+ .resource = ip7500media_portb_sd_resources,
+ .num_resources = ARRAY_SIZE(ip7500media_portb_sd_resources),
+ .dev = {
+ .platform_data = &ip7500media_portb_sd_platform_data,
+ },
+
+};
+
+/*
+ * ip7500media_portb_sd_init
+ */
+static void ip7500media_portb_sd_init(void)
+{
+ /*
+ * Check the device tree for the sd_tio
+ */
+ struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd");
+ if (!sd_node) {
+ printk(KERN_INFO "PortB SDTIO not found\n");
+ return;
+ }
+
+ /*
+ * Fill in the resources and platform data from devtree information
+ */
+ ip7500media_portb_sd_resources[0].start = sd_node->dn.sendirq;
+ ip7500media_portb_sd_resources[1].start = sd_node->dn.recvirq;
+ ip7500media_portb_sd_resources[2].start = (u32_t)&(sd_node->regs);
+ ip7500media_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs);
+
+ platform_device_register(&ip7500media_portb_sd_device);
+}
+
+/*
+ * ip7500media_u17_setup
+ * Called by I2C to tell us that u17 is setup.
+ *
+ * This function is called by I2C to tell us that u17 has been setup. All
+ * devices which rely on this chip being initialized (or even present) need to
+ * be initialized in this function otherwise they may get initialized too early.
+ *
+ * Currently the only device depending on u17 is the SDIO
+ */
+static int __init ip7500media_u17_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context)
+{
+ /*
+ * Initialize the Port F/Port B SD slots (only the enabled ports will init)
+ */
+ ip7500media_portf_sd_init();
+ ip7500media_portb_sd_init();
+
+ return 0;
+}
+
+/******************************************************************************
+ * LCD VGH on the board at PE6
+ */
+static struct ubicom32lcd_platform_data ip7500media_lcd_data = {
+ .vgh_gpio = GPIO_RE_7,
+ .vgh_polarity = true,
+};
+
+static struct platform_device ip7500media_lcd_device = {
+ .name = "ubicom32lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7500media_lcd_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight on the board PD0, hardware PWM
+ */
+static struct ubicom32bl_platform_data ip7500media_backlight_data = {
+ .type = UBICOM32BL_TYPE_PWM,
+ .pwm_channel = 2,
+ .pwm_prescale = 15,
+ .pwm_period = 60,
+ .default_intensity = 0x80,
+};
+
+static struct platform_device ip7500media_backlight_device = {
+ .name = "ubicom32bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &ip7500media_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * Ubicom32Input on I2C, U15 MAX7310, address 0x18, 8 bits
+ */
+static struct ubicom32input_i2c_button ip7500media_ubicom32input_i2c_u15_buttons[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .bit = 0,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .bit = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .bit = 2,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .bit = 3,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .bit = 4,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_MENU,
+ .bit = 5,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_ESC,
+ .bit = 6,
+ .active_low = 1,
+ },
+};
+
+static struct ubicom32input_i2c_platform_data ip7500media_ubicom32input_i2c_u15_platform_data = {
+ .buttons = ip7500media_ubicom32input_i2c_u15_buttons,
+ .nbuttons = ARRAY_SIZE(ip7500media_ubicom32input_i2c_u15_buttons),
+ .name = "Ubicom32 Input I2C U15",
+};
+
+/******************************************************************************
+ * Additional GPIO chips
+ */
+static struct pca953x_platform_data ip7500media_gpio_u16_platform_data = {
+ .gpio_base = IP7500MEDIA_U16_BASE,
+};
+
+static struct pca953x_platform_data ip7500media_gpio_u17_platform_data = {
+ .gpio_base = IP7500MEDIA_U17_BASE,
+ .setup = ip7500media_u17_setup,
+};
+
+static struct pca953x_platform_data ip7500media_gpio_u18_platform_data = {
+ .gpio_base = IP7500MEDIA_U18_BASE,
+};
+
+/******************************************************************************
+ * Devices on the I2C bus
+ *
+ * BEWARE of changing the order of things in this array as we depend on
+ * certain things to be in certain places.
+ */
+static struct i2c_board_info __initdata ip7500media_i2c_board_info[] = {
+ /*
+ * U6, CS4350 DAC, address 0x4B
+ */
+ {
+ .type = "cs4350",
+ .addr = 0x4B,
+ },
+
+ /*
+ * U14, S35390A RTC, address 0x30
+ */
+ {
+ .type = "s35390a",
+ .addr = 0x30,
+ },
+
+ /*
+ * U15, MAX7310 IO expander, 8 bits, address 0x18
+ * IO0: User I/O (J16-1) (Left) IO4: User I/O (J16-5) (Enter)
+ * IO1: User I/O (J16-2) (Right) IO5: User I/O (J16-6) (Menu)
+ * IO2: User I/O (J16-3) (Up) IO6: User I/O (J16-7) (Back)
+ * IO3: User I/O (J16-4) (Down) IO7: User I/O (J16-8)
+ */
+ {
+ .type = "ubicom32in_max7310",
+ .addr = 0x18,
+ .platform_data = &ip7500media_ubicom32input_i2c_u15_platform_data,
+ },
+
+ /*
+ * U16, MAX7310 IO expander, 8 bits, address 0x1C
+ * IO8 : User I/O (J16-9) IO12: User I/O (J16-17)
+ * IO9 : User I/O (J16-10) IO13: User I/O (J16-18)
+ * IO10: User I/O (J16-15) IO14: User I/O (J16-19)
+ * IO11: User I/O (J16-16) IO15: User I/O (J16-20)
+ */
+ {
+ .type = "max7310",
+ .addr = 0x1C,
+ .platform_data = &ip7500media_gpio_u16_platform_data,
+ },
+
+ /*
+ * U17, MAX7310 IO expander, 8 bits, address 0x1A
+ * IO16: SDIO1A_WP IO20: SD1A_PWREN
+ * IO17: SDIO1B_WP IO21: SD1B_PWREN
+ * IO18: SDIO2_CD IO22: SD2_PWREN
+ * IO19: SDIO2_WP IO23: SDIO1A_CD
+ *
+ */
+ {
+ .type = "max7310",
+ .addr = 0x1A,
+ .platform_data = &ip7500media_gpio_u17_platform_data,
+ },
+
+ /*
+ * U18, MAX7310 IOB expander, 8 bits, address 0x1E
+ * IO24: SDIO1B_CD IO28: User I/O TP6
+ * IO25: User I/O TP9 IO29: User I/O TP5
+ * IO26: User I/O TP8 IO30: User I/O TP4
+ * IO27: User I/O TP7 IO31: User I/O TP3
+ */
+ {
+ .type = "max7310",
+ .addr = 0x1E,
+ .platform_data = &ip7500media_gpio_u18_platform_data,
+ },
+};
+
+/*
+ * I2C bus on the board, SDA PE4, SCL PE5
+ */
+static struct i2c_gpio_platform_data ip7500media_i2c_data = {
+ .sda_pin = GPIO_RE_4,
+ .scl_pin = GPIO_RE_5,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .udelay = 50,
+};
+
+static struct platform_device ip7500media_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ip7500media_i2c_data,
+ },
+};
+
+/*
+ * List of all devices in our system
+ */
+static struct platform_device *ip7500media_devices[] __initdata = {
+ &ip7500media_i2c_device,
+ &ip7500media_lcd_device,
+ &ip7500media_backlight_device,
+};
+
+/*
+ * ip7500media_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7500media_init(void)
+{
+ struct platform_device *audio_dev;
+
+ board_init();
+
+ ubi_gpio_init();
+
+#ifdef CONFIG_UIO_UBICOM32RING
+ ring_tio_init("decoder_ring");
+#endif
+
+ /*
+ * Start up the video driver first
+ */
+ vdc_tio_init();
+
+ /*
+ * Register all of the devices we have on this board
+ */
+ printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__);
+ platform_add_devices(ip7500media_devices, ARRAY_SIZE(ip7500media_devices));
+
+ /*
+ * Allocate the audio driver if we can
+ */
+ audio_dev = audio_tio_alloc("snd-ubi32-cs4350", "audiotio-i2sout", 0);
+ if (audio_dev) {
+ ip7500media_i2c_board_info[0].platform_data = audio_dev;
+ }
+
+ /*
+ * Register all of the devices which sit on the I2C bus
+ */
+ printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__);
+ i2c_register_board_info(0, ip7500media_i2c_board_info, ARRAY_SIZE(ip7500media_i2c_board_info));
+
+ /*
+ * We have to initialize the SDIO after the I2C IOB gets setup. SDIO is initialized in
+ * ip7500media_u17_setup
+ */
+
+ return 0;
+}
+
+arch_initcall(ip7500media_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/board-ip7500module.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ubicom32/mach-ip7k/board-ip7500module.c
+ * Support for IP7500 CPU module board.
+ *
+ * This file supports the IP7500 CPU module board:
+ * 8007-0510 Rev 1.0
+ * 8007-0510A Rev 1.0 (with ethernet)
+ *
+ * DIP Switch SW2 configuration: (*) default
+ * POS 1: on(*) = PCI enabled, off = PCI disabled
+ * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12
+ * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15
+ * POS 4: unused
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/board.h>
+#include <asm/machdep.h>
+#include <asm/ring_tio.h>
+#include <asm/vdc_tio.h>
+
+/*
+ * ip7500module_init
+ * Called to add the devices which we have on this board
+ */
+static int __init ip7500module_init(void)
+{
+ board_init();
+
+ ubi_gpio_init();
+
+ return 0;
+}
+
+arch_initcall(ip7500module_init);
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/Kconfig
@@ -0,0 +1,132 @@
+config IP7145DPF
+ bool "IP7145DPF"
+ select UBICOM32_V4
+ select UBICOM_INPUT
+ select UBICOM_INPUT_I2C
+ select RTC_CLASS
+ select RTC_DRV_S35390A
+ select I2C
+ select I2C_GPIO
+ select GPIO_PCA953X
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select LCD_UBICOM32
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_UBICOM32
+ select SND_UBI32
+ select MMC_UBICOM32
+ select MMC
+ select MMC_BLOCK
+ select BRD_64MB
+ help
+ IP7145 Digital Picture Frame reference design, supports:
+ 8007-0410 v1.0
+
+config IP7160RGW
+ bool "IP7160RGW"
+ select UBICOM32_V4
+ select UBICOM_INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ select SPI
+ select SPI_UBICOM32_GPIO
+ select VLAN_8021Q
+ select UBICOM_SWITCH
+ select UBICOM_SWITCH_BCM539X
+ help
+ Ubicom IP7160 RGW Eval, supports:
+ 8007-0110 v1.0
+ 8007-0111 v1.1
+ 8007-0112 v1.2
+
+config IP7160BRINGUP
+ bool "IP7160BRINGUP"
+ select UBICOM32_V4
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_GPIO
+ select BRD_64MB
+ help
+ Ubicom IP7160 Bringup, supports:
+ 8007-0010 v1.0
+
+config IP7160DPF
+ bool "IP7160DPF"
+ select UBICOM32_V4
+ select I2C
+ select I2C_GPIO
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4350
+ select UBICOM_HID
+ select BRD_64MB
+ help
+ IP7160 Digital Picture Frame board, supports:
+ 8007-0211 Rev 1.1
+
+config IP7500MODULE
+ bool "IP7500MODULE"
+ select UBICOM32_V4
+ select BRD_128MB
+ help
+ Ubicom IP7500 CPU Module board, supports:
+ 8007-0510 v1.0
+ 8007-0510A v1.0
+
+ Please see ip7500module.c for more details.
+
+config IP7500AV
+ bool "IP7500AV"
+ select UBICOM32_V4
+ select BRD_128MB
+ select I2C
+ select I2C_GPIO
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4384
+ select FB
+ select FB_UBICOM32
+ help
+ Ubicom IP7500 Audio Video board, supports:
+ 8007-0810 v1.0
+
+ With Ubicom IP7500 CPU Module board:
+ 8007-0510 v1.0 -or-
+ 8007-0510A v1.0
+
+ Please see ip7500av.c for more details.
+
+config IP7500MEDIA
+ bool "IP7500MEDIA"
+ select UBICOM32_V4
+ select UBICOM_INPUT_I2C
+ select RTC_CLASS
+ select RTC_DRV_S35390A
+ select I2C
+ select I2C_GPIO
+ select GPIO_PCA953X
+ select FB
+ select FB_UBICOM32
+ select BACKLIGHT_LCD_SUPPORT
+ select LCD_CLASS_DEVICE
+ select LCD_UBICOM32
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_UBICOM32
+ select SND_UBI32
+ select SND_UBI32_AUDIO_CS4350
+ select MMC_UBICOM32
+ select MMC
+ select MMC_BLOCK
+ select BRD_128MB
+ help
+ IP7500 Media Board w/ IP7500 CPU Module board, supports:
+ 8007-0610 v1.0 w/ 8007-0510 v1.0
+
+ Please see ip7500media.c for more details.
+
--- /dev/null
+++ b/arch/ubicom32/mach-ip7k/Makefile
@@ -0,0 +1,35 @@
+#
+# arch/ubicom32/mach-ip7k/Makefile
+# Makefile for ip7k based boards.
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-$(CONFIG_IP7145DPF) += board-ip7145dpf.o
+obj-$(CONFIG_IP7160RGW) += board-ip7160rgw.o
+obj-$(CONFIG_IP7160BRINGUP) += board-ip7160bringup.o
+obj-$(CONFIG_IP7160DPF) += board-ip7160dpf.o
+obj-$(CONFIG_IP7500MODULE) += board-ip7500module.o
+obj-$(CONFIG_IP7500MEDIA) += board-ip7500media.o
+obj-$(CONFIG_IP7500AV) += board-ip7500av.o
--- /dev/null
+++ b/arch/ubicom32/Makefile
@@ -0,0 +1,103 @@
+#
+# arch/ubicom32/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+KBUILD_DEFCONFIG :=
+
+# setup the machine name and machine dependent settings
+machine-$(CONFIG_UBICOM32_V3) := ip5k
+machine-$(CONFIG_UBICOM32_V4) := ip7k
+MACHINE := $(machine-y)
+export MACHINE
+
+model-$(CONFIG_RAMKERNEL) := ram
+model-$(CONFIG_ROMKERNEL) := rom
+MODEL := $(model-y)
+export MODEL
+
+CPUCLASS := $(cpuclass-y)
+
+export CPUCLASS
+
+#
+# We want the core kernel built using the fastcall ABI but modules need
+# to be built using the slower calling convention because they could be
+# loaded out of range for fast calls.
+#
+CFLAGS_KERNEL += -mfastcall
+CFLAGS_MODULE += -mno-fastcall
+
+#
+# Some CFLAG additions based on specific CPU type.
+#
+cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -mno-fdpic -DIP5000
+cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -mno-fdpic -DIP7000
+
+ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
+LDFLAGS_vmlinux := $(ldflags-y)
+
+GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
+
+KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
+KBUILD_AFLAGS += $(cflags-y)
+
+KBUILD_CFLAGS += -D__linux__ -Dlinux
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+
+# include any machine specific directory
+ifneq ($(machine-y),)
+core-y += arch/$(ARCH)/mach-$(MACHINE)/
+endif
+
+head-y := arch/$(ARCH)/kernel/head.o
+
+core-y += arch/$(ARCH)/kernel/ \
+ arch/$(ARCH)/mm/ \
+ arch/$(ARCH)/crypto/ \
+ arch/$(ARCH)/mach-common/
+
+drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
+
+libs-y += arch/$(ARCH)/lib/
+
+archclean:
+
+# make sure developer has selected a valid board
+ifeq ($(CONFIG_NOBOARD),y)
+# $(error have to select a valid board file $(CONFIG_NOBOARD), please run kernel config again)
+_all: config_board_error
+endif
+
+config_board_error:
+ @echo "*************************************************"
+ @echo "You have not selected a proper board."
+ @echo "Please run menuconfig (or config) against your"
+ @echo "kernel and choose your board under Processor"
+ @echo "options"
+ @echo "*************************************************"
+ @exit 1
+
--- /dev/null
+++ b/arch/ubicom32/mm/fault.c
@@ -0,0 +1,81 @@
+/*
+ * arch/ubicom32/mm/fault.c
+ * Ubicom32 architecture page fault implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/mm/fault.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+
+extern void die_if_kernel(char *, struct pt_regs *, long);
+
+/*
+ * This routine handles page faults. It determines the problem, and
+ * then passes it off to one of the appropriate routines.
+ *
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+#ifdef DEBUG
+ printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
+ regs->sr, regs->pc, address, error_code);
+#endif
+
+ /*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+ if ((unsigned long) address < PAGE_SIZE) {
+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+ } else
+ printk(KERN_ALERT "Unable to handle kernel access");
+ printk(KERN_ALERT " at virtual address %08lx\n",address);
+ die_if_kernel("Oops", regs, error_code);
+ do_exit(SIGKILL);
+
+ return 1;
+}
+
--- /dev/null
+++ b/arch/ubicom32/mm/init.c
@@ -0,0 +1,261 @@
+/*
+ * arch/ubicom32/mm/init.c
+ * Ubicom32 architecture virtual memory initialization.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/mm/init.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
+ * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/ocm-alloc.h>
+
+#undef DEBUG
+
+extern void die_if_kernel(char *,struct pt_regs *,long);
+extern void free_initmem(void);
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+
+static unsigned long empty_bad_page;
+
+unsigned long empty_zero_page;
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+ int cached = 0;
+
+ printk(KERN_INFO "\nMem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map+i))
+ reserved++;
+ else if (PageSwapCache(mem_map+i))
+ cached++;
+ else if (!page_count(mem_map+i))
+ free++;
+ else
+ shared += page_count(mem_map+i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n",total);
+ printk(KERN_INFO "%d free pages\n",free);
+ printk(KERN_INFO "%d reserved pages\n",reserved);
+ printk(KERN_INFO "%d pages shared\n",shared);
+ printk(KERN_INFO "%d pages swap cached\n",cached);
+}
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern char __ocm_free_begin;
+extern char __ocm_free_end;
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+ /*
+ * Make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views of the world.
+ */
+#ifdef DEBUG
+ unsigned long start_mem = PAGE_ALIGN(memory_start);
+#endif
+ unsigned long end_mem = memory_end & PAGE_MASK;
+
+#ifdef DEBUG
+ printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+#endif
+
+ /*
+ * Initialize the bad page table and bad page to point
+ * to a couple of allocated pages.
+ */
+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /*
+ * TODO: enable setting up for user memory management interface.
+ */
+
+#ifdef DEBUG
+ printk (KERN_DEBUG "before free_area_init\n");
+
+ printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+#endif
+
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+#ifdef CONFIG_ZONE_DMA
+ zones_size[ZONE_DMA] = OCMSIZE >> PAGE_SHIFT;
+#endif
+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = 0;
+#endif
+ free_area_init(zones_size);
+ }
+}
+
+void __init mem_init(void)
+{
+ int codek = 0, datak = 0, initk = 0;
+ unsigned long tmp;
+ extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
+ unsigned long len = CONFIG_RAMSIZE + OCMSIZE;
+ unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
+ unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */
+
+#ifdef DEBUG
+ printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
+#endif
+
+ end_mem &= PAGE_MASK;
+ high_memory = (void *) end_mem;
+
+ start_mem = PAGE_ALIGN(start_mem);
+ max_mapnr = num_physpages = (((unsigned long) high_memory) - PAGE_OFFSET) >> PAGE_SHIFT;
+
+ /* this will put all memory onto the freelists */
+#ifdef CONFIG_ZONE_DMA
+ {
+ unsigned long ocm_free_begin = (unsigned long)&__ocm_free_begin;
+ unsigned long ocm_free_end = (unsigned long)&__ocm_free_end;
+ unsigned long zone_dma_begin = (ocm_free_begin + PAGE_SIZE - 1) & PAGE_MASK;
+ unsigned long zone_dma_end = ocm_free_end & PAGE_MASK;
+ if (zone_dma_end > zone_dma_begin)
+ free_bootmem(zone_dma_begin, zone_dma_end-zone_dma_begin);
+ }
+#endif
+ totalram_pages = free_all_bootmem();
+
+ codek = (&_etext - &_stext) >> 10;
+ datak = (&_ebss - &_sdata) >> 10;
+ initk = (&__init_begin - &__init_end) >> 10;
+
+ tmp = nr_free_pages() << PAGE_SHIFT;
+ printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
+ tmp >> 10,
+ len >> 10,
+ codek,
+ datak
+ );
+
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ int pages = 0;
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ pages++;
+ }
+ printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+}
+#endif
+
+void
+free_initmem()
+{
+#ifdef CONFIG_RAMKERNEL
+ unsigned long addr;
+ extern char __init_begin, __init_end;
+ /*
+ * The following code should be cool even if these sections
+ * are not page aligned.
+ */
+ addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ /* next to check that the page we free is not a partial page */
+ for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_NOTICE "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
+ (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (int)(addr - PAGE_SIZE));
+#endif
+}
+
--- /dev/null
+++ b/arch/ubicom32/mm/kmap.c
@@ -0,0 +1,79 @@
+/*
+ * arch/ubicom32/mm/kmap.c
+ * Ubicom32 architecture non-mmu ioremap and friends implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
+ * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#undef DEBUG
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
+{
+ return (void *)physaddr;
+}
+
+/*
+ * Unmap a ioremap()ed region again.
+ */
+void iounmap(void *addr)
+{
+}
+
+/*
+ * __iounmap unmaps nearly everything, so be careful
+ * it doesn't free currently pointer/page tables anymore but it
+ * wans't used anyway and might be added later.
+ */
+void __iounmap(void *addr, unsigned long size)
+{
+}
+
+/*
+ * Set new cache mode for some kernel address space.
+ * The caller must push data for that range itself, if such data may already
+ * be in the cache.
+ */
+void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
+{
+}
--- /dev/null
+++ b/arch/ubicom32/mm/Makefile
@@ -0,0 +1,32 @@
+#
+# arch/ubicom32/mm/Makefile
+# <TODO: Replace with short file description>
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+#
+# Makefile for the linux m68knommu specific parts of the memory manager.
+#
+
+obj-y += init.o fault.o memory.o kmap.o ocm-alloc.o
--- /dev/null
+++ b/arch/ubicom32/mm/memory.c
@@ -0,0 +1,59 @@
+/*
+ * arch/ubicom32/mm/memory.c
+ * Ubicom32 architecture kernel_map() implementation.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/mm/memory.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+
+/*
+ * Map some physical address range into the kernel address space.
+ * The code is copied and adapted from map_chunk().
+ */
+
+unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp )
+{
+ return paddr;
+}
+
--- /dev/null
+++ b/arch/ubicom32/mm/ocm-alloc.c
@@ -0,0 +1,439 @@
+/*
+ * arch/ubicom32/mm/ocm-alloc.c
+ * OCM allocator for Uibcom32 On-Chip memory
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Based on:
+ *
+ * arch/blackfin/mm/sram-alloc.c
+ *
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/mutex.h>
+#include <linux/rtc.h>
+#include <asm/ocm-alloc.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, a...)
+#endif
+/*
+ * the data structure for OCM heap pieces
+ */
+struct ocm_piece {
+ void *paddr;
+ int size;
+ pid_t pid;
+ struct ocm_piece *next;
+};
+
+/*
+ * struct ocm_heap
+ */
+struct ocm_heap {
+ struct ocm_piece free_head;
+ struct ocm_piece used_head;
+ struct mutex lock;
+};
+
+static struct ocm_heap ocm_inst_heap;
+
+/*
+ * OCM area for storing code
+ */
+extern asmlinkage void *__ocm_inst_heap_begin;
+extern asmlinkage void *__ocm_inst_heap_end;
+#define OCM_INST_HEAP_BEGIN ((unsigned int)&__ocm_inst_heap_begin)
+#define OCM_INST_HEAP_END ((unsigned int)&__ocm_inst_heap_end)
+#define OCM_INST_HEAP_LENGTH (OCM_INST_HEAP_END - OCM_INST_HEAP_BEGIN)
+
+static struct kmem_cache *ocm_piece_cache;
+
+/*
+ * _ocm_heap_init()
+ */
+static int __init _ocm_heap_init(struct ocm_heap *ocmh,
+ unsigned int start,
+ unsigned int size)
+{
+ ocmh->free_head.next = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
+
+ if (!ocmh->free_head.next)
+ return -1;
+
+ ocmh->free_head.next->paddr = (void *)start;
+ ocmh->free_head.next->size = size;
+ ocmh->free_head.next->pid = 0;
+ ocmh->free_head.next->next = 0;
+
+ ocmh->used_head.next = NULL;
+
+ /* mutex initialize */
+ mutex_init(&ocmh->lock);
+
+ return 0;
+}
+
+/*
+ * _ocm_alloc_init()
+ *
+ * starts the ocm heap(s)
+ */
+static int __init _ocm_alloc_init(void)
+{
+ if (OCM_INST_HEAP_LENGTH) {
+ ocm_piece_cache = kmem_cache_create("ocm_piece_cache",
+ sizeof(struct ocm_piece),
+ 0, SLAB_PANIC, NULL);
+
+ if (_ocm_heap_init(&ocm_inst_heap,
+ OCM_INST_HEAP_BEGIN,
+ OCM_INST_HEAP_LENGTH) == 0)
+ printk(KERN_INFO "OCM Instruction Heap %d KB\n",
+ OCM_INST_HEAP_LENGTH >> 10);
+ else
+ printk(KERN_INFO "Failed to initialize OCM "
+ "Instruction Heap\n");
+
+ } else
+ printk(KERN_INFO "No space available for OCM "
+ "Instruction Heap\n");
+
+ return 0;
+}
+pure_initcall(_ocm_alloc_init);
+
+/*
+ * _ocm_alloc()
+ * generic alloc a block in the ocm heap, if successful
+ * returns the pointer.
+ */
+static void *_ocm_alloc(size_t size, pid_t pid, struct ocm_heap *ocmheap)
+{
+ struct ocm_piece *pslot, *plast, *pavail;
+ struct ocm_piece *pfree_head = &ocmheap->free_head;
+ struct ocm_piece *pused_head = &ocmheap->used_head;
+
+ if (size <= 0 || !pfree_head || !pused_head)
+ return NULL;
+
+ /* Align the size */
+ size = (size + 3) & ~3;
+
+ pslot = pfree_head->next;
+ plast = pfree_head;
+
+ /*
+ * search an available piece slot
+ */
+ while (pslot != NULL && size > pslot->size) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pslot)
+ return NULL;
+
+ if (pslot->size == size) {
+ /*
+ * Unlink this block from the list
+ */
+ plast->next = pslot->next;
+ pavail = pslot;
+ } else {
+ /*
+ * Split this block in two.
+ */
+ pavail = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL);
+
+ if (!pavail)
+ return NULL;
+
+ pavail->paddr = pslot->paddr;
+ pavail->size = size;
+ pslot->paddr += size;
+ pslot->size -= size;
+ }
+
+ pavail->pid = pid;
+
+ pslot = pused_head->next;
+ plast = pused_head;
+
+ /*
+ * insert new piece into used piece list !!!
+ */
+ while (pslot != NULL && pavail->paddr < pslot->paddr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ pavail->next = pslot;
+ plast->next = pavail;
+
+ DEBUGP("_ocm_alloc %d bytes at %p from in %p",
+ size, pavail->paddr, ocmheap);
+
+ return pavail->paddr;
+}
+
+#if 0
+/* Allocate the largest available block. */
+static void *_ocm_alloc_max(struct ocm_heap *ocmheap,
+ unsigned long *psize)
+{
+ struct ocm_piece *pfree_head = &ocmheap->free_head;
+ struct ocm_piece *pslot, *pmax;
+
+ pmax = pslot = pfree_head->next;
+
+ /* search an available piece slot */
+ while (pslot != NULL) {
+ if (pslot->size > pmax->size)
+ pmax = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pmax)
+ return NULL;
+
+ *psize = pmax->size;
+
+ return _ocm_alloc(*psize, ocmheap);
+}
+#endif
+
+/*
+ * _ocm_free()
+ * generic free a block in the ocm heap, if successful
+ */
+static int _ocm_free(const void *addr,
+ struct ocm_heap *ocmheap)
+{
+ struct ocm_piece *pslot, *plast, *pavail;
+ struct ocm_piece *pfree_head = &ocmheap->free_head;
+ struct ocm_piece *pused_head = &ocmheap->used_head;
+
+ /* search the relevant memory slot */
+ pslot = pused_head->next;
+ plast = pused_head;
+
+ /* search an available piece slot */
+ while (pslot != NULL && pslot->paddr != addr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (!pslot) {
+ DEBUGP("_ocm_free %p not found in %p", addr, ocmheap);
+ return -1;
+ }
+ DEBUGP("_ocm_free %p from in %p", addr, ocmheap);
+
+ plast->next = pslot->next;
+ pavail = pslot;
+ pavail->pid = 0;
+
+ /* insert free pieces back to the free list */
+ pslot = pfree_head->next;
+ plast = pfree_head;
+
+ while (pslot != NULL && addr > pslot->paddr) {
+ plast = pslot;
+ pslot = pslot->next;
+ }
+
+ if (plast != pfree_head &&
+ plast->paddr + plast->size == pavail->paddr) {
+ plast->size += pavail->size;
+ kmem_cache_free(ocm_piece_cache, pavail);
+ } else {
+ pavail->next = plast->next;
+ plast->next = pavail;
+ plast = pavail;
+ }
+
+ if (pslot && plast->paddr + plast->size == pslot->paddr) {
+ plast->size += pslot->size;
+ plast->next = pslot->next;
+ kmem_cache_free(ocm_piece_cache, pslot);
+ }
+
+ return 0;
+}
+
+/*
+ * ocm_inst_alloc()
+ *
+ * allocates a block of size in the ocm instrction heap, if
+ * successful returns address allocated.
+ */
+void *ocm_inst_alloc(size_t size, pid_t pid)
+{
+ void *addr;
+
+ if (!OCM_INST_HEAP_LENGTH)
+ return NULL;
+
+
+ mutex_lock(&ocm_inst_heap.lock);
+
+ addr = _ocm_alloc(size, pid, &ocm_inst_heap);
+
+ mutex_unlock(&ocm_inst_heap.lock);
+
+ return addr;
+}
+EXPORT_SYMBOL(ocm_inst_alloc);
+
+/*
+ * ocm_inst_free()
+ * free a block in the ocm instrction heap, returns 0 if successful.
+ */
+int ocm_inst_free(const void *addr)
+{
+ int ret;
+
+ if (!OCM_INST_HEAP_LENGTH)
+ return -1;
+
+ mutex_lock(&ocm_inst_heap.lock);
+
+ ret = _ocm_free(addr, &ocm_inst_heap);
+
+ mutex_unlock(&ocm_inst_heap.lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(ocm_inst_free);
+
+/*
+ * ocm_free()
+ * free a block in one of the ocm heaps, returns 0 if successful.
+ */
+int ocm_free(const void *addr)
+{
+ if (addr >= (void *)OCM_INST_HEAP_BEGIN
+ && addr < (void *)(OCM_INST_HEAP_END))
+ return ocm_inst_free(addr);
+ else
+ return -1;
+}
+EXPORT_SYMBOL(ocm_free);
+
+
+#ifdef CONFIG_PROC_FS
+/* Need to keep line of output the same. Currently, that is 46 bytes
+ * (including newline).
+ */
+static int _ocm_proc_read(char *buf, int *len, int count, const char *desc,
+ struct ocm_heap *ocmheap)
+{
+ struct ocm_piece *pslot;
+ struct ocm_piece *pfree_head = &ocmheap->free_head;
+ struct ocm_piece *pused_head = &ocmheap->used_head;
+
+ /* The format is the following
+ * --- OCM 123456789012345 Size PID State \n
+ * 12345678-12345678 1234567890 12345 1234567890\n
+ */
+ int l;
+ l = sprintf(&buf[*len], "--- OCM %-15s Size PID State \n",
+ desc);
+
+ *len += l;
+ count -= l;
+
+ mutex_lock(&ocm_inst_heap.lock);
+
+ /*
+ * search the relevant memory slot
+ */
+ pslot = pused_head->next;
+
+ while (pslot != NULL && count > 46) {
+ l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+ pslot->paddr, pslot->paddr + pslot->size,
+ pslot->size, pslot->pid, "ALLOCATED");
+
+ *len += l;
+ count -= l;
+ pslot = pslot->next;
+ }
+
+ pslot = pfree_head->next;
+
+ while (pslot != NULL && count > 46) {
+ l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+ pslot->paddr, pslot->paddr + pslot->size,
+ pslot->size, pslot->pid, "FREE");
+
+ *len += l;
+ count -= l;
+ pslot = pslot->next;
+ }
+
+ mutex_unlock(&ocm_inst_heap.lock);
+
+ return 0;
+}
+static int ocm_proc_read(char *buf, char **start, off_t offset, int count,
+ int *eof, void *data)
+{
+ int len = 0;
+
+ if (_ocm_proc_read(buf, &len, count - len, "Inst Heap",
+ &ocm_inst_heap))
+ goto not_done;
+ *eof = 1;
+ not_done:
+ return len;
+}
+
+static int __init sram_proc_init(void)
+{
+ struct proc_dir_entry *ptr;
+ ptr = create_proc_entry("ocm", S_IFREG | S_IRUGO, NULL);
+ if (!ptr) {
+ printk(KERN_WARNING "unable to create /proc/ocm\n");
+ return -1;
+ }
+ ptr->owner = THIS_MODULE;
+ ptr->read_proc = ocm_proc_read;
+ return 0;
+}
+late_initcall(sram_proc_init);
+#endif
--- /dev/null
+++ b/arch/ubicom32/oprofile/ipProf.h
@@ -0,0 +1,39 @@
+#ifndef __IP_PROF_H__
+#define __IP_PROF_H__
+
+/* This number MUST match what is used in the ultra configuration! */
+#define IPPROFILETIO_MAX_SAMPLES 600
+
+/* Move to .h file used in both; avoid special types */
+struct profile_sample {
+ unsigned int pc; /* PC value */
+ unsigned int parent; /* a5 contents, to find the caller */
+ unsigned char cond_codes; /* for branch prediction */
+ unsigned char thread; /* I-blocked, D-blocked,
+ 4-bit thread number */
+ unsigned short active; /* which threads are active -
+ for accurate counting */
+ unsigned short blocked; /* which threads are blocked due to
+ I or D cache misses */
+ unsigned int latency; /* CPU clocks since the last message
+ dispatch in this thread
+ (thread 0 only for now) */
+};
+
+
+struct profilenode {
+ struct devtree_node dn;
+ volatile unsigned char enabled; /* Is the tio enabled to
+ take samples? */
+ volatile unsigned char busy; /* set when the samples
+ are being read */
+ volatile unsigned int mask; /* Threads that change the MT_EN flag */
+ volatile unsigned short rate; /* What is the sampling rate? */
+ volatile unsigned short head; /* sample taker puts samples here */
+ volatile unsigned short tail; /* packet filler takes samples here */
+ volatile unsigned short count; /* number of valid samples */
+ volatile unsigned short total; /* Total samples */
+ struct profile_sample samples[IPPROFILETIO_MAX_SAMPLES];
+};
+
+#endif
--- /dev/null
+++ b/arch/ubicom32/oprofile/Makefile
@@ -0,0 +1,37 @@
+#
+# arch/ubicom32/Makefile
+# Makefile for Oprofile support on Ubicom32
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) profile.o
--- /dev/null
+++ b/arch/ubicom32/oprofile/profile.c
@@ -0,0 +1,221 @@
+/*
+ * arch/ubicom32/oprofile/profile.c
+ * Oprofile support for arch Ubicom32
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option)
+ * any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it will
+ * be useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/**
+ * @file profile.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Hunyue Yau <hy@hy-research.com>
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/devtree.h>
+#include <asm/thread.h>
+
+/* For identifying userland vs kernel address */
+#include <asm/stacktrace.h>
+#include "ipProf.h"
+
+/* For communications with the backend */
+static struct profilenode *profile_node;
+
+/* Bitmask containing all Linux threads - as seen by the ROSR reg */
+static unsigned long th_all_mask;
+
+/* Lookup table to translate a hardware thread into a CPU identifier
+ * Table is indexed by the ROSR value which is assumed to be
+ * relatively small (0...15).
+ */
+unsigned int cpu_map[THREAD_ARCHITECTURAL_MAX];
+
+static struct pt_regs regs;
+
+/*
+ * For each sample returned, checked to see if they are relevant to
+ * us. This is necessary as the ubicom32 architecture has other software
+ * running outside of Linux. Only then, put the sample into the relevant
+ * cpu bins.
+ *
+ * To minimize overhead, a global mask with all possible threads of in
+ * interest to us is used as a first check. Then a second mask identifying
+ * the thread is used to obtain an identifier for that "CPU".
+ */
+
+/*
+ * ubicom32_build_cpu_th_mask()
+ *
+ * Build a lookup table for translation between hardware thread
+ * "ROSR" values and Linux CPU ids
+ *
+ * *** This gets executed on all CPUs at once! ***
+ */
+static void ubicom32_build_cpu_th_mask(void *mask)
+{
+ thread_t self = thread_get_self();
+ unsigned long *th_m = mask;
+
+ BUG_ON(self <= 0 || self >= THREAD_ARCHITECTURAL_MAX);
+ cpu_map[self] = smp_processor_id();
+
+ set_bit(self, th_m);
+}
+
+/*
+ * profile_interrupt()
+ *
+ * Process samples returned from the profiler backend. The backend
+ * may return samples that are irrelevant to us or may even return
+ * multiple samples for the same CPU. Note that the sames may be
+ * for ANY cpu. At this time, this is unique and to support this requires
+ * Oprofile to expose an interface to accept the CPU that the same came
+ * frome.
+ */
+static irqreturn_t profile_interrupt(int irq, void *arg)
+{
+ int i, buf_entry;
+ int is_kernel;
+ unsigned int bit_th;
+ unsigned int th;
+
+ if (!(profile_node->enabled) || profile_node->count < 0) {
+ printk(KERN_WARNING
+ "Unexpected interrupt, no samples or not enabled!\n");
+ return IRQ_HANDLED;
+ }
+
+ profile_node->busy = 1; /* Keep backend out */
+
+ for (i = 0; i < profile_node->count; i++) {
+ buf_entry = profile_node->tail;
+ profile_node->tail++;
+ profile_node->tail %= IPPROFILETIO_MAX_SAMPLES;
+
+ /* Note - the "thread" ID is only the lower 4 bits */
+ th = (0x0f & profile_node->samples[buf_entry].thread);
+ bit_th = (1 << th);
+
+ if ((bit_th & th_all_mask) == 0)
+ continue;
+
+ regs.pc = profile_node->samples[buf_entry].pc;
+
+ is_kernel = ubicom32_is_kernel(regs.pc);
+
+ oprofile_add_ext_sample_cpu(regs.pc, &regs, 0, is_kernel,
+ cpu_map[th]);
+ }
+ profile_node->count = 0;
+ profile_node->busy = 0;
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * profile_start()
+ *
+ * Notification from oprofile to start the profiler
+ */
+static int profile_start(void)
+{
+ if (!profile_node)
+ return -1;
+
+ profile_node->enabled = 1;
+
+ return 0;
+}
+
+/*
+ * profile_stop()
+ *
+ * Notification from oprofile to stop the profiler
+ */
+static void profile_stop(void)
+{
+ if (profile_node)
+ profile_node->enabled = 0;
+}
+
+/*
+ * oprofile_arch_init()
+ *
+ * Attach to Oprofile after qualify the availability of the backend
+ * profiler support.
+ */
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ int r = -ENODEV;
+
+ profile_node = (struct profilenode *)devtree_find_node("profiler");
+
+ if (profile_node == NULL) {
+ printk(KERN_WARNING "Cannot find profiler node\n");
+ return r;
+ }
+
+ r = request_irq(profile_node->dn.recvirq, profile_interrupt,
+ IRQF_DISABLED, "profiler", NULL);
+
+ if (r < 0) {
+ profile_node = NULL;
+ printk(KERN_WARNING "Cannot get profiler IRQ\n");
+ return r;
+ }
+
+ ops->start = profile_start;
+ ops->stop = profile_stop;
+ ops->cpu_type = "timer";
+
+ memset(cpu_map, 0, sizeof(cpu_map));
+
+ on_each_cpu(ubicom32_build_cpu_th_mask, &th_all_mask, 1);
+
+ memset(&regs, 0, sizeof(regs));
+
+ return r;
+}
+
+/*
+ * oprofile_arch_exit()
+ *
+ * External call to take outselves out.
+ * Make sure backend is not running.
+ */
+void oprofile_arch_exit(void)
+{
+ BUG_ON(profile_node->enabled);
+}
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -134,3 +134,16 @@ config HW_RANDOM_VIRTIO
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
+
+config HW_RANDOM_UBICOM32
+ tristate "Ubicom32 HW Random Number Generator support"
+ depends on HW_RANDOM && UBICOM32
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Ubicom32 processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pasemi-rng.
+
+ If unsure, say Y.
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
--- /dev/null
+++ b/drivers/char/hw_random/ubicom32-rng.c
@@ -0,0 +1,105 @@
+/*
+ * drivers/net/ubi32-eth.c
+ * Ubicom32 hardware random number generator driver.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hw_random.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/ip5000.h>
+
+#define MODULE_NAME "ubicom32_rng"
+
+static int ubicom32_rng_data_present(struct hwrng *rng, int wait)
+{
+ int data, i;
+
+ for (i = 0; i < 20; i++) {
+ data = *(int *)(TIMER_BASE + TIMER_TRN);
+ if (data || !wait)
+ break;
+ udelay(10);
+ }
+ return data;
+}
+
+static int ubicom32_rng_data_read(struct hwrng *rng, u32 *data)
+{
+ *data = *(int *)(TIMER_BASE + TIMER_TRN);
+ return 4;
+}
+
+static int ubicom32_rng_init(struct hwrng *rng)
+{
+ printk(KERN_INFO "ubicom32 rng init\n");
+ *(int *)(TIMER_BASE + TIMER_TRN_CFG) = TIMER_TRN_CFG_ENABLE_OSC;
+ return 0;
+}
+
+static void ubicom32_rng_cleanup(struct hwrng *rng)
+{
+ printk(KERN_INFO "ubicom32 rng cleanup\n");
+ *(int *)(TIMER_BASE + TIMER_TRN_CFG) = 0;
+}
+
+static struct hwrng ubicom32_rng = {
+ .name = MODULE_NAME,
+ .init = ubicom32_rng_init,
+ .cleanup = ubicom32_rng_cleanup,
+ .data_present = ubicom32_rng_data_present,
+ .data_read = ubicom32_rng_data_read,
+ .priv = 0,
+};
+
+static int __init mod_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "ubicom32 rng started\n");
+ err = hwrng_register(&ubicom32_rng);
+ if (err) {
+ printk(KERN_ERR "ubicom32 rng register failed (%d)\n",
+ err);
+ }
+
+ return err;
+}
+
+static void __exit mod_exit(void)
+{
+ printk(KERN_INFO "ubicom32 rng stopped\n");
+ hwrng_unregister(&ubicom32_rng);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ubicom, Inc.");
+MODULE_DESCRIPTION("H/W rng driver for ubicom32 processor");
+MODULE_VERSION("1:1.0.a");
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
To compile this driver as a module, choose M here: the module
will be called geode-aes.
+config CRYPTO_UBICOM32
+ bool "Ubicom32 Security Module"
+ depends on UBICOM32
+ help
+ This is the ubicom32 hardware acceleration common code.
+
+config CRYPTO_AES_UBICOM32
+ tristate "Ubicom32 AES implementation"
+ depends on CRYPTO_UBICOM32
+ select CRYPTO_ALGAPI
+ help
+ This is the ubicom32 hardware AES implementation.
+
+config CRYPTO_DES_UBICOM32
+ tristate "Ubicom32 DES implementation"
+ depends on CRYPTO_UBICOM32
+ select CRYPTO_ALGAPI
+ help
+ This is the ubicom32 hardware DES and 3DES implementation.
+
+config CRYPTO_SHA1_UBICOM32
+ tristate "Ubicom32 SHA1 implementation"
+ depends on CRYPTO_UBICOM32
+ select CRYPTO_ALGAPI
+ help
+ This is the ubicom32 hardware SHA1 implementation.
+
+config CRYPTO_MD5_UBICOM32
+ tristate "Ubicom32 MD5 implementation"
+ depends on CRYPTO_UBICOM32
+ select CRYPTO_ALGAPI
+ help
+ This is the ubicom32 hardware MD5 implementation.
+
config ZCRYPT
tristate "Support for PCI-attached cryptographic adapters"
depends on S390
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -193,6 +193,13 @@ config MMC_TMIO
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also ipaq ASIC3
+config MMC_UBICOM32
+ tristate "Ubicom32 MMC/SD host controller"
+ depends on UBICOM32
+ help
+ This provides support for the SD/MMC hardware found on Ubicom32
+ IP7K processors
+
config GPIOMMC
tristate "MMC/SD over GPIO-based SPI"
depends on MMC && MMC_SPI && (SPI_GPIO || SPI_GPIO_OLD)
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -22,5 +22,6 @@ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
obj-$(CONFIG_GPIOMMC) += gpiommc.o
--- /dev/null
+++ b/drivers/mmc/host/ubicom32sd.c
@@ -0,0 +1,774 @@
+/*
+ * drivers/mmc/host/ubicom32sd.c
+ * Ubicom32 Secure Digital Host Controller Interface driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/scatterlist.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+
+#include <asm/ubicom32sd.h>
+
+#define DRIVER_NAME "ubicom32sd"
+
+#define sd_printk(...)
+//#define sd_printk printk
+
+#define SDTIO_VP_VERSION 3
+
+#define SDTIO_MAX_SG_BLOCKS 16
+
+enum sdtio_commands {
+ SDTIO_COMMAND_NOP,
+ SDTIO_COMMAND_SETUP,
+ SDTIO_COMMAND_SETUP_SDIO,
+ SDTIO_COMMAND_EXECUTE,
+ SDTIO_COMMAND_RESET,
+};
+
+#define SDTIO_COMMAND_SHIFT 24
+#define SDTIO_COMMAND_FLAG_STOP_RSP_CRC (1 << 10)
+#define SDTIO_COMMAND_FLAG_STOP_RSP_136 (1 << 9)
+#define SDTIO_COMMAND_FLAG_STOP_RSP (1 << 8)
+#define SDTIO_COMMAND_FLAG_STOP_CMD (1 << 7)
+#define SDTIO_COMMAND_FLAG_DATA_STREAM (1 << 6)
+#define SDTIO_COMMAND_FLAG_DATA_RD (1 << 5)
+#define SDTIO_COMMAND_FLAG_DATA_WR (1 << 4)
+#define SDTIO_COMMAND_FLAG_CMD_RSP_CRC (1 << 3)
+#define SDTIO_COMMAND_FLAG_CMD_RSP_136 (1 << 2)
+#define SDTIO_COMMAND_FLAG_CMD_RSP (1 << 1)
+#define SDTIO_COMMAND_FLAG_CMD (1 << 0)
+
+/*
+ * SDTIO_COMMAND_SETUP_SDIO
+ */
+#define SDTIO_COMMAND_FLAG_SDIO_INT_EN (1 << 0)
+
+/*
+ * SDTIO_COMMAND_SETUP
+ * clock speed in arg
+ */
+#define SDTIO_COMMAND_FLAG_4BIT (1 << 3)
+#define SDTIO_COMMAND_FLAG_1BIT (1 << 2)
+#define SDTIO_COMMAND_FLAG_SET_CLOCK (1 << 1)
+#define SDTIO_COMMAND_FLAG_SET_WIDTH (1 << 0)
+
+#define SDTIO_COMMAND_FLAG_CMD_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP | SDTIO_COMMAND_FLAG_CMD_RSP_136)
+#define SDTIO_COMMAND_FLAG_STOP_RSP_MASK (SDTIO_COMMAND_FLAG_STOP_RSP | SDTIO_COMMAND_FLAG_STOP_RSP_136)
+#define SDTIO_COMMAND_FLAG_RSP_MASK (SDTIO_COMMAND_FLAG_CMD_RSP_MASK | SDTIO_COMMAND_FLAG_STOP_RSP_MASK)
+
+struct sdtio_vp_sg {
+ volatile void *addr;
+ volatile u32_t len;
+};
+
+#define SDTIO_VP_INT_STATUS_DONE (1 << 31)
+#define SDTIO_VP_INT_STATUS_SDIO_INT (1 << 10)
+#define SDTIO_VP_INT_STATUS_DATA_CRC_ERR (1 << 9)
+#define SDTIO_VP_INT_STATUS_DATA_PROG_ERR (1 << 8)
+#define SDTIO_VP_INT_STATUS_DATA_TIMEOUT (1 << 7)
+#define SDTIO_VP_INT_STATUS_STOP_RSP_CRC (1 << 6)
+#define SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT (1 << 5)
+#define SDTIO_VP_INT_STATUS_CMD_RSP_CRC (1 << 4)
+#define SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT (1 << 3)
+#define SDTIO_VP_INT_STATUS_CMD_TIMEOUT (1 << 2)
+#define SDTIO_VP_INT_STATUS_CARD1_INSERT (1 << 1)
+#define SDTIO_VP_INT_STATUS_CARD0_INSERT (1 << 0)
+
+struct sdtio_vp_regs {
+ u32_t version;
+ u32_t f_max;
+ u32_t f_min;
+
+ volatile u32_t int_status;
+
+ volatile u32_t command;
+ volatile u32_t arg;
+
+ volatile u32_t cmd_opcode;
+ volatile u32_t cmd_arg;
+ volatile u32_t cmd_rsp0;
+ volatile u32_t cmd_rsp1;
+ volatile u32_t cmd_rsp2;
+ volatile u32_t cmd_rsp3;
+
+ volatile u32_t stop_opcode;
+ volatile u32_t stop_arg;
+ volatile u32_t stop_rsp0;
+ volatile u32_t stop_rsp1;
+ volatile u32_t stop_rsp2;
+ volatile u32_t stop_rsp3;
+
+ volatile u32_t data_timeout_ns;
+ volatile u16_t data_blksz;
+ volatile u16_t data_blkct;
+ volatile u32_t data_bytes_transferred;
+ volatile u32_t sg_len;
+ struct sdtio_vp_sg sg[SDTIO_MAX_SG_BLOCKS];
+};
+
+struct ubicom32sd_data {
+ const struct ubicom32sd_platform_data *pdata;
+
+ struct mmc_host *mmc;
+
+ /*
+ * Lock used to protect the data structure
+ spinlock_t lock;
+ */
+ int int_en;
+ int int_pend;
+
+ /*
+ * Receive and transmit interrupts used for communicating
+ * with hardware
+ */
+ int irq_tx;
+ int irq_rx;
+
+ /*
+ * Current outstanding mmc request
+ */
+ struct mmc_request *mrq;
+
+ /*
+ * Hardware registers
+ */
+ struct sdtio_vp_regs *regs;
+};
+
+/*****************************************************************************\
+ * *
+ * Suspend/resume *
+ * *
+\*****************************************************************************/
+
+#if 0//def CONFIG_PM
+
+int ubicom32sd_suspend_host(struct ubicom32sd_host *host, pm_message_t state)
+{
+ int ret;
+
+ ret = mmc_suspend_host(host->mmc, state);
+ if (ret)
+ return ret;
+
+ free_irq(host->irq, host);
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(ubicom32sd_suspend_host);
+
+int ubicom32sd_resume_host(struct ubicom32sd_host *host)
+{
+ int ret;
+
+ if (host->flags & UBICOM32SD_USE_DMA) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ ret = request_irq(host->irq, ubicom32sd_irq, IRQF_SHARED,
+ mmc_hostname(host->mmc), host);
+ if (ret)
+ return ret;
+
+ ubicom32sd_init(host);
+ mmiowb();
+
+ ret = mmc_resume_host(host->mmc);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(ubicom32sd_resume_host);
+
+#endif /* CONFIG_PM */
+
+/*
+ * ubicom32sd_send_command_sync
+ */
+static void ubicom32sd_send_command_sync(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
+{
+ ud->regs->command = command;
+ ud->regs->arg = arg;
+ ubicom32_set_interrupt(ud->irq_tx);
+ while (ud->regs->command) {
+ ndelay(100);
+ }
+}
+
+/*
+ * ubicom32sd_send_command
+ */
+static void ubicom32sd_send_command(struct ubicom32sd_data *ud, u32_t command, u32_t arg)
+{
+ ud->regs->command = command;
+ ud->regs->arg = arg;
+ ubicom32_set_interrupt(ud->irq_tx);
+}
+
+/*
+ * ubicom32sd_reset
+ */
+static void ubicom32sd_reset(struct ubicom32sd_data *ud)
+{
+ ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_RESET << SDTIO_COMMAND_SHIFT, 0);
+ ud->regs->int_status = 0;
+}
+
+/*
+ * ubicom32sd_mmc_request
+ */
+static void ubicom32sd_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ u32_t command = SDTIO_COMMAND_EXECUTE << SDTIO_COMMAND_SHIFT;
+ int ret = 0;
+
+ WARN(ud->mrq != NULL, "ud->mrq still set to %p\n", ud->mrq);
+ //pr_debug("send cmd %08x arg %08x flags %08x\n", cmd->opcode, cmd->arg, cmd->flags);
+
+ if (mrq->cmd) {
+ struct mmc_command *cmd = mrq->cmd;
+
+ sd_printk("%s:\t\t\tsetup cmd %02d arg %08x flags %08x\n", mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags);
+
+ ud->regs->cmd_opcode = cmd->opcode;
+ ud->regs->cmd_arg = cmd->arg;
+
+ command |= SDTIO_COMMAND_FLAG_CMD;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ command |= SDTIO_COMMAND_FLAG_CMD_RSP;
+ }
+
+ if (cmd->flags & MMC_RSP_136) {
+ command |= SDTIO_COMMAND_FLAG_CMD_RSP_136;
+ }
+
+ if (cmd->flags & MMC_RSP_CRC) {
+ command |= SDTIO_COMMAND_FLAG_CMD_RSP_CRC;
+ }
+ }
+
+ if (mrq->data) {
+ struct mmc_data *data = mrq->data;
+ struct scatterlist *sg = data->sg;
+ int i;
+
+printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n", mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len, data->flags, data->timeout_ns);
+
+ sd_printk("%s:\t\t\tsetup data blksz %d num %d sglen=%d fl=%08x Tns=%u\n",
+ mmc_hostname(mmc), data->blksz, data->blocks, data->sg_len,
+ data->flags, data->timeout_ns);
+
+ if (data->sg_len > SDTIO_MAX_SG_BLOCKS) {
+ ret = -EINVAL;
+ data->error = -EINVAL;
+ goto fail;
+ }
+
+ ud->regs->data_timeout_ns = data->timeout_ns;
+ ud->regs->data_blksz = data->blksz;
+ ud->regs->data_blkct = data->blocks;
+ ud->regs->sg_len = data->sg_len;
+
+ /*
+ * Load all of our sg list into the driver sg buffer
+ */
+ for (i = 0; i < data->sg_len; i++) {
+ sd_printk("%s: sg %d = %p %d\n", mmc_hostname(mmc), i, sg_virt(sg), sg->length);
+ ud->regs->sg[i].addr = sg_virt(sg);
+ ud->regs->sg[i].len = sg->length;
+ if (((u32_t)ud->regs->sg[i].addr & 0x03) || (sg->length & 0x03)) {
+ sd_printk("%s: Need aligned buffers\n", mmc_hostname(mmc));
+ ret = -EINVAL;
+ data->error = -EINVAL;
+ goto fail;
+ }
+ sg++;
+ }
+ if (data->flags & MMC_DATA_READ) {
+ command |= SDTIO_COMMAND_FLAG_DATA_RD;
+ } else if (data->flags & MMC_DATA_WRITE) {
+ command |= SDTIO_COMMAND_FLAG_DATA_WR;
+ } else if (data->flags & MMC_DATA_STREAM) {
+ command |= SDTIO_COMMAND_FLAG_DATA_STREAM;
+ }
+ }
+
+ if (mrq->stop) {
+ struct mmc_command *stop = mrq->stop;
+ sd_printk("%s: \t\t\tsetup stop %02d arg %08x flags %08x\n", mmc_hostname(mmc), stop->opcode, stop->arg, stop->flags);
+
+ ud->regs->stop_opcode = stop->opcode;
+ ud->regs->stop_arg = stop->arg;
+
+ command |= SDTIO_COMMAND_FLAG_STOP_CMD;
+
+ if (stop->flags & MMC_RSP_PRESENT) {
+ command |= SDTIO_COMMAND_FLAG_STOP_RSP;
+ }
+
+ if (stop->flags & MMC_RSP_136) {
+ command |= SDTIO_COMMAND_FLAG_STOP_RSP_136;
+ }
+
+ if (stop->flags & MMC_RSP_CRC) {
+ command |= SDTIO_COMMAND_FLAG_STOP_RSP_CRC;
+ }
+ }
+
+ ud->mrq = mrq;
+
+ sd_printk("%s: Sending command %08x\n", mmc_hostname(mmc), command);
+
+ ubicom32sd_send_command(ud, command, 0);
+
+ return;
+fail:
+ sd_printk("%s: mmcreq ret = %d\n", mmc_hostname(mmc), ret);
+ mrq->cmd->error = ret;
+ mmc_request_done(mmc, mrq);
+}
+
+/*
+ * ubicom32sd_mmc_set_ios
+ */
+static void ubicom32sd_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ u32_t command = SDTIO_COMMAND_SETUP << SDTIO_COMMAND_SHIFT;
+ u32_t arg = 0;
+ sd_printk("%s: ios call bw:%u pm:%u clk:%u\n", mmc_hostname(mmc), 1 << ios->bus_width, ios->power_mode, ios->clock);
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_1BIT;
+ break;
+
+ case MMC_BUS_WIDTH_4:
+ command |= SDTIO_COMMAND_FLAG_SET_WIDTH | SDTIO_COMMAND_FLAG_4BIT;
+ break;
+ }
+
+ if (ios->clock) {
+ arg = ios->clock;
+ command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
+ }
+
+ switch (ios->power_mode) {
+
+ /*
+ * Turn off the SD bus (power + clock)
+ */
+ case MMC_POWER_OFF:
+ gpio_set_value(ud->pdata->cards[0].pin_pwr, !ud->pdata->cards[0].pwr_polarity);
+ command |= SDTIO_COMMAND_FLAG_SET_CLOCK;
+ break;
+
+ /*
+ * Turn on the power to the SD bus
+ */
+ case MMC_POWER_ON:
+ gpio_set_value(ud->pdata->cards[0].pin_pwr, ud->pdata->cards[0].pwr_polarity);
+ break;
+
+ /*
+ * Turn on the clock to the SD bus
+ */
+ case MMC_POWER_UP:
+ /*
+ * Done above
+ */
+ break;
+ }
+
+ ubicom32sd_send_command_sync(ud, command, arg);
+
+ /*
+ * Let the power settle down
+ */
+ udelay(500);
+}
+
+/*
+ * ubicom32sd_mmc_get_cd
+ */
+static int ubicom32sd_mmc_get_cd(struct mmc_host *mmc)
+{
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ sd_printk("%s: get cd %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_cd, gpio_get_value(ud->pdata->cards[0].pin_cd));
+
+ return gpio_get_value(ud->pdata->cards[0].pin_cd) ?
+ ud->pdata->cards[0].cd_polarity :
+ !ud->pdata->cards[0].cd_polarity;
+}
+
+/*
+ * ubicom32sd_mmc_get_ro
+ */
+static int ubicom32sd_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ sd_printk("%s: get ro %u %u\n", mmc_hostname(mmc), ud->pdata->cards[0].pin_wp, gpio_get_value(ud->pdata->cards[0].pin_wp));
+
+ return gpio_get_value(ud->pdata->cards[0].pin_wp) ?
+ ud->pdata->cards[0].wp_polarity :
+ !ud->pdata->cards[0].wp_polarity;
+}
+
+/*
+ * ubicom32sd_mmc_enable_sdio_irq
+ */
+static void ubicom32sd_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+
+ ud->int_en = enable;
+ if (enable && ud->int_pend) {
+ ud->int_pend = 0;
+ mmc_signal_sdio_irq(mmc);
+ }
+}
+
+/*
+ * ubicom32sd_interrupt
+ */
+static irqreturn_t ubicom32sd_interrupt(int irq, void *dev)
+{
+ struct mmc_host *mmc = (struct mmc_host *)dev;
+ struct mmc_request *mrq;
+ struct ubicom32sd_data *ud;
+ u32_t int_status;
+
+ if (!mmc) {
+ return IRQ_HANDLED;
+ }
+
+ ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ if (!ud) {
+ return IRQ_HANDLED;
+ }
+
+ int_status = ud->regs->int_status;
+ ud->regs->int_status &= ~int_status;
+
+ if (int_status & SDTIO_VP_INT_STATUS_SDIO_INT) {
+ if (ud->int_en) {
+ ud->int_pend = 0;
+ mmc_signal_sdio_irq(mmc);
+ } else {
+ ud->int_pend++;
+ }
+ }
+
+ if (!(int_status & SDTIO_VP_INT_STATUS_DONE)) {
+ return IRQ_HANDLED;
+ }
+
+ mrq = ud->mrq;
+ if (!mrq) {
+ sd_printk("%s: Spurious interrupt", mmc_hostname(mmc));
+ return IRQ_HANDLED;
+ }
+ ud->mrq = NULL;
+
+ /*
+ * SDTIO_VP_INT_DONE
+ */
+ if (mrq->cmd->flags & MMC_RSP_PRESENT) {
+ struct mmc_command *cmd = mrq->cmd;
+ cmd->error = 0;
+
+ if ((cmd->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_CRC)) {
+ cmd->error = -EILSEQ;
+ } else if (int_status & SDTIO_VP_INT_STATUS_CMD_RSP_TIMEOUT) {
+ cmd->error = -ETIMEDOUT;
+ goto done;
+ } else if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = ud->regs->cmd_rsp0;
+ cmd->resp[1] = ud->regs->cmd_rsp1;
+ cmd->resp[2] = ud->regs->cmd_rsp2;
+ cmd->resp[3] = ud->regs->cmd_rsp3;
+ } else {
+ cmd->resp[0] = ud->regs->cmd_rsp0;
+ }
+ sd_printk("%s:\t\t\tResponse %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error);
+ }
+
+ if (mrq->data) {
+ struct mmc_data *data = mrq->data;
+
+ if (int_status & SDTIO_VP_INT_STATUS_DATA_TIMEOUT) {
+ data->error = -ETIMEDOUT;
+ sd_printk("%s:\t\t\tData Timeout\n", mmc_hostname(mmc));
+ goto done;
+ } else if (int_status & SDTIO_VP_INT_STATUS_DATA_CRC_ERR) {
+ data->error = -EILSEQ;
+ sd_printk("%s:\t\t\tData CRC\n", mmc_hostname(mmc));
+ goto done;
+ } else if (int_status & SDTIO_VP_INT_STATUS_DATA_PROG_ERR) {
+ data->error = -EILSEQ;
+ sd_printk("%s:\t\t\tData Program Error\n", mmc_hostname(mmc));
+ goto done;
+ } else {
+ data->error = 0;
+ data->bytes_xfered = ud->regs->data_bytes_transferred;
+ }
+ }
+
+ if (mrq->stop && (mrq->stop->flags & MMC_RSP_PRESENT)) {
+ struct mmc_command *stop = mrq->stop;
+ stop->error = 0;
+
+ if ((stop->flags & MMC_RSP_CRC) && (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_CRC)) {
+ stop->error = -EILSEQ;
+ } else if (int_status & SDTIO_VP_INT_STATUS_STOP_RSP_TIMEOUT) {
+ stop->error = -ETIMEDOUT;
+ goto done;
+ } else if (stop->flags & MMC_RSP_136) {
+ stop->resp[0] = ud->regs->stop_rsp0;
+ stop->resp[1] = ud->regs->stop_rsp1;
+ stop->resp[2] = ud->regs->stop_rsp2;
+ stop->resp[3] = ud->regs->stop_rsp3;
+ } else {
+ stop->resp[0] = ud->regs->stop_rsp0;
+ }
+ sd_printk("%s:\t\t\tStop Response %08x %08x %08x %08x err=%d\n", mmc_hostname(mmc), stop->resp[0], stop->resp[1], stop->resp[2], stop->resp[3], stop->error);
+ }
+
+done:
+ mmc_request_done(mmc, mrq);
+
+ return IRQ_HANDLED;
+}
+
+static struct mmc_host_ops ubicom32sd_ops = {
+ .request = ubicom32sd_mmc_request,
+ .set_ios = ubicom32sd_mmc_set_ios,
+ .get_ro = ubicom32sd_mmc_get_ro,
+ .get_cd = ubicom32sd_mmc_get_cd,
+ .enable_sdio_irq = ubicom32sd_mmc_enable_sdio_irq,
+};
+
+/*
+ * ubicom32sd_probe
+ */
+static int __devinit ubicom32sd_probe(struct platform_device *pdev)
+{
+ struct ubicom32sd_platform_data *pdata = (struct ubicom32sd_platform_data *)pdev->dev.platform_data;
+ struct mmc_host *mmc;
+ struct ubicom32sd_data *ud;
+ struct resource *res_regs;
+ struct resource *res_irq_tx;
+ struct resource *res_irq_rx;
+ int ret;
+
+ /*
+ * Get our resources, regs is the hardware driver base address
+ * and the tx and rx irqs are used to communicate with the
+ * hardware driver.
+ */
+ res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+ if (!res_regs || !res_irq_tx || !res_irq_rx) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ /*
+ * Reserve any gpios we need
+ */
+ ret = gpio_request(pdata->cards[0].pin_wp, "sd-wp");
+ if (ret) {
+ goto fail;
+ }
+ gpio_direction_input(pdata->cards[0].pin_wp);
+
+ ret = gpio_request(pdata->cards[0].pin_cd, "sd-cd");
+ if (ret) {
+ goto fail_cd;
+ }
+ gpio_direction_input(pdata->cards[0].pin_cd);
+
+ /*
+ * HACK: for the dual port controller on port F, we don't support the second port right now
+ */
+ if (pdata->ncards > 1) {
+ ret = gpio_request(pdata->cards[1].pin_pwr, "sd-pwr");
+ gpio_direction_output(pdata->cards[1].pin_pwr, !pdata->cards[1].pwr_polarity);
+ gpio_direction_output(pdata->cards[1].pin_pwr, pdata->cards[1].pwr_polarity);
+ }
+
+ ret = gpio_request(pdata->cards[0].pin_pwr, "sd-pwr");
+ if (ret) {
+ goto fail_pwr;
+ }
+ gpio_direction_output(pdata->cards[0].pin_pwr, !pdata->cards[0].pwr_polarity);
+
+ /*
+ * Allocate the MMC driver, it includes memory for our data.
+ */
+ mmc = mmc_alloc_host(sizeof(struct ubicom32sd_data), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto fail_mmc;
+ }
+ ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+ ud->mmc = mmc;
+ ud->pdata = pdata;
+ ud->regs = (struct sdtio_vp_regs *)res_regs->start;
+ ud->irq_tx = res_irq_tx->start;
+ ud->irq_rx = res_irq_rx->start;
+ platform_set_drvdata(pdev, mmc);
+
+ ret = request_irq(ud->irq_rx, ubicom32sd_interrupt, IRQF_DISABLED, mmc_hostname(mmc), mmc);
+ if (ret) {
+ goto fail_mmc;
+ }
+
+ /*
+ * Fill in the mmc structure
+ */
+ mmc->ops = &ubicom32sd_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+ mmc->f_min = ud->regs->f_min;
+ mmc->f_max = ud->regs->f_max;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /*
+ * Setup some restrictions on transfers
+ *
+ * We allow up to SDTIO_MAX_SG_BLOCKS of data to DMA into, there are
+ * not really any "max_seg_size", "max_req_size", or "max_blk_count"
+ * restrictions (must be less than U32_MAX though), pick
+ * something large?!...
+ *
+ * The hardware can do up to 4095 bytes per block, since the spec
+ * only requires 2048, we'll set it to that and not worry about
+ * potential weird blk lengths.
+ */
+ mmc->max_hw_segs = SDTIO_MAX_SG_BLOCKS;
+ mmc->max_phys_segs = SDTIO_MAX_SG_BLOCKS;
+ mmc->max_seg_size = 1024 * 1024;
+ mmc->max_req_size = 1024 * 1024;
+ mmc->max_blk_count = 1024;
+
+ mmc->max_blk_size = 2048;
+
+ ubicom32sd_reset(ud);
+
+ /*
+ * enable interrupts
+ */
+ ud->int_en = 0;
+ ubicom32sd_send_command_sync(ud, SDTIO_COMMAND_SETUP_SDIO << SDTIO_COMMAND_SHIFT | SDTIO_COMMAND_FLAG_SDIO_INT_EN, 0);
+
+ mmc_add_host(mmc);
+
+ printk(KERN_INFO "%s at %p, irq %d/%d\n", mmc_hostname(mmc),
+ ud->regs, ud->irq_tx, ud->irq_rx);
+ return 0;
+
+fail_mmc:
+ gpio_free(pdata->cards[0].pin_pwr);
+fail_pwr:
+ gpio_free(pdata->cards[0].pin_cd);
+fail_cd:
+ gpio_free(pdata->cards[0].pin_wp);
+fail:
+ return ret;
+}
+
+/*
+ * ubicom32sd_remove
+ */
+static int __devexit ubicom32sd_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (mmc) {
+ struct ubicom32sd_data *ud = (struct ubicom32sd_data *)mmc_priv(mmc);
+
+ gpio_free(ud->pdata->cards[0].pin_pwr);
+ gpio_free(ud->pdata->cards[0].pin_cd);
+ gpio_free(ud->pdata->cards[0].pin_wp);
+
+ mmc_remove_host(mmc);
+ mmc_free_host(mmc);
+ }
+
+ /*
+ * Note that our data is allocated as part of the mmc structure
+ * so we don't need to free it.
+ */
+ return 0;
+}
+
+static struct platform_driver ubicom32sd_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ubicom32sd_probe,
+ .remove = __devexit_p(ubicom32sd_remove),
+#if 0
+ .suspend = ubicom32sd_suspend,
+ .resume = ubicom32sd_resume,
+#endif
+};
+
+/*
+ * ubicom32sd_init
+ */
+static int __init ubicom32sd_init(void)
+{
+ return platform_driver_register(&ubicom32sd_driver);
+}
+module_init(ubicom32sd_init);
+
+/*
+ * ubicom32sd_exit
+ */
+static void __exit ubicom32sd_exit(void)
+{
+ platform_driver_unregister(&ubicom32sd_driver);
+}
+module_exit(ubicom32sd_exit);
+
+MODULE_AUTHOR("Patrick Tjin");
+MODULE_DESCRIPTION("Ubicom32 Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL");
+
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,17 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
+config MTD_UBI32_M25P80
+ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+ depends on UBICOM32
+ default y
+ help
+ This enables access to most modern SPI flash chips, used for
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
+ or to add other chips.
+
config MTD_SLRAM
tristate "Uncached system RAM"
help
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
--- /dev/null
+++ b/drivers/mtd/devices/ubi32-m25p80.c
@@ -0,0 +1,1066 @@
+/*
+ * drivers/mtd/devices/ubi32-m25p80.c
+ * NOR flash driver, Ubicom processor internal SPI flash interface.
+ *
+ * This code instantiates the serial flash that contains the
+ * original bootcode. The serial flash start at address 0x60000000
+ * in both Ubicom32V3 and Ubicom32V4 ISAs.
+ *
+ * This piece of flash is made to appear as a Memory Technology
+ * Device (MTD) with this driver to allow Read/Write/Erase operations.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <asm/ip5000.h>
+#include <asm/devtree.h>
+
+#define UBICOM32_FLASH_BASE 0x60000000
+#define UBICOM32_FLASH_MAX_SIZE 0x01000000
+#define UBICOM32_FLASH_START 0x00000000
+#define UBICOM32_KERNEL_OFFSET 0x00010000 /* The kernel starts after Ubicom
+ * .protect section. */
+
+static struct mtd_partition ubicom32_flash_partitions[] = {
+ {
+ .name = "Bootloader", /* Protected Section
+ * Partition */
+ .size = 0x10000,
+ .offset = UBICOM32_FLASH_START,
+// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
+ },
+ {
+ .name = "Kernel", /* Kernel Partition. */
+ .size = 0, /* this will be set up during
+ * probe stage. At that time we
+ * will know end of linux image
+ * in flash. */
+ .offset = MTDPART_OFS_APPEND, /* Starts right after Protected
+ * section. */
+// .mask_flags = MTD_WRITEABLE /* Mark Read-only */
+ },
+ {
+ .name = "Rest", /* Rest of the flash. */
+ .size = 0x200000, /* Use up what remains in the
+ * flash. */
+ .offset = MTDPART_OFS_NXTBLK, /* Starts right after Protected
+ * section. */
+ }
+};
+
+static struct flash_platform_data ubicom32_flash_data = {
+ .name = "ubicom32_boot_flash",
+ .parts = ubicom32_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ubicom32_flash_partitions),
+};
+
+static struct resource ubicom32_flash_resource[] = {
+ {
+ .start = UBICOM32_FLASH_BASE,
+ .end = UBICOM32_FLASH_BASE +
+ UBICOM32_FLASH_MAX_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ubicom32_flash_device = {
+ .name = "ubicom32flashdriver",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(ubicom32_flash_resource),
+ .resource = ubicom32_flash_resource,
+ .dev = {
+ .platform_data = &ubicom32_flash_data,
+ },
+};
+
+static struct platform_device *ubicom32_flash_devices[] = {
+ &ubicom32_flash_device,
+};
+
+static int __init ubicom32_flash_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n",
+ __FUNCTION__);
+ platform_add_devices(ubicom32_flash_devices,
+ ARRAY_SIZE(ubicom32_flash_devices));
+ return 0;
+}
+
+arch_initcall(ubicom32_flash_init);
+
+/*
+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips through
+ * Ubicom32 SPI controller.
+ *
+ * Author: Mike Lavender, mike@steroidmicros.com
+ *
+ * Copyright (c) 2005, Intec Automation Inc.
+ *
+ * Some parts are based on lart.c by Abraham Van Der Merwe
+ *
+ * Cleaned up and generalized based on mtd_dataflash.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define FLASH_PAGESIZE 256
+
+/* Flash opcodes. */
+#define OPCODE_WREN 0x06 /* Write enable */
+#define OPCODE_RDSR 0x05 /* Read status register */
+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
+#define OPCODE_RDID 0x9f /* Read JEDEC ID */
+
+/* Status Register bits. */
+#define SR_WIP 1 /* Write in progress */
+#define SR_WEL 2 /* Write enable latch */
+/* meaning of other SR_* bits may differ between vendors */
+#define SR_BP0 4 /* Block protect 0 */
+#define SR_BP1 8 /* Block protect 1 */
+#define SR_BP2 0x10 /* Block protect 2 */
+#define SR_SRWD 0x80 /* SR write protect */
+
+/* Define max times to check status register before we give up. */
+#define MAX_READY_WAIT_COUNT 100000
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+#define mtd_has_partitions() (1)
+#else
+#define mtd_has_partitions() (0)
+#endif
+
+/*
+ * Ubicom32 FLASH Command Set
+ */
+#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */
+#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */
+#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */
+
+#define ALIGN_DOWN(v, a) ((v) & ~((a) - 1))
+#define ALIGN_UP(v, a) (((v) + ((a) - 1)) & ~((a) - 1))
+
+#define FLASH_COMMAND_KICK_OFF(io) \
+ asm volatile( \
+ " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
+ " jmpt.t .+4 \n\t" \
+ " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \
+ : \
+ : "a" (io) \
+ : "memory", "cc" \
+ );
+
+#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \
+ asm volatile( \
+ " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \
+ " jmpeq.f .-4 \n\t" \
+ : \
+ : "a" (io) \
+ : "memory", "cc" \
+ );
+
+#define FLASH_COMMAND_EXEC(io) \
+ FLASH_COMMAND_KICK_OFF(io) \
+ FLASH_COMMAND_WAIT_FOR_COMPLETION(io)
+
+
+#define OSC1_FREQ 12000000
+#define TEN_MICRO_SECONDS (OSC1_FREQ * 10 / 1000000)
+
+/*
+ * We will have to eventually replace this null definition with the real thing.
+ */
+#define WATCHDOG_RESET()
+
+#define EXTFLASH_WRITE_FIFO_SIZE 32
+#define EXTFLASH_WRITE_BLOCK_SIZE EXTFLASH_WRITE_FIFO_SIZE /* limit the size to
+ * FIFO capacity, so
+ * the thread can be
+ * suspended. */
+
+#define JFFS2_FILESYSTEM_SIZE 0x100000
+
+/****************************************************************************/
+
+struct m25p {
+ struct platform_device *plt_dev;
+ struct mutex lock;
+ struct mtd_info mtd;
+ unsigned partitioned:1;
+ u8 erase_opcode;
+ u8 command[4];
+};
+
+static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct m25p, mtd);
+}
+
+/****************************************************************************/
+
+/*
+ * Internal helper functions
+ */
+
+/*
+ * Read the status register, returning its value in the location
+ * Return the status register value.
+ * Returns negative if error occurred.
+ */
+static int read_sr(struct m25p *flash)
+{
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
+ IO_XFL_CTL1_FC_DATA(1);
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
+ FLASH_COMMAND_EXEC(io);
+
+ return io->status1 & 0xff;
+}
+
+/*
+ * mem_flash_io_read_u32()
+ */
+static u32 mem_flash_io_read_u32(u32 addr)
+{
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
+ IO_XFL_CTL1_FC_DATA(4) | IO_XFL_CTL1_FC_DUMMY(1) |
+ IO_XFL_CTL1_FC_ADDR;
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_FAST_READ) |
+ IO_XFL_CTL2_FC_ADDR(addr);
+ FLASH_COMMAND_EXEC(io);
+ return io->status1;
+}
+
+/*
+ * mem_flash_read_u8()
+ */
+static u8 mem_flash_read_u8(u32 addr)
+{
+ u32 tmp_addr = ALIGN_DOWN(addr, 4);
+ u32 tmp_data = mem_flash_io_read_u32(tmp_addr);
+ u8 *ptr = (u8 *)&tmp_data;
+ return ptr[addr & 0x3];
+}
+
+/*
+ * mem_flash_read()
+ * No need to lock as read is implemented with ireads (same as normal flash
+ * execution).
+ */
+static void mem_flash_read(u32 addr, void *dst, size_t length)
+{
+ /*
+ * Range check
+ */
+ /*
+ * Fix source alignment.
+ */
+ while (addr & 0x03) {
+ if (length == 0) {
+ return;
+ }
+ *((u8 *)dst) = mem_flash_read_u8(addr++);
+ dst++;
+ length--;
+ }
+
+ while (length >= 4) {
+ u32 tmp_data = mem_flash_io_read_u32(addr);
+ addr += 4;
+ length -= 4;
+
+ /*
+ * Send the data to the destination.
+ */
+ memcpy((void *)dst, (void *)&tmp_data, 4);
+ dst += 4;
+ }
+
+ while (length--) {
+ *((u8 *)dst) = mem_flash_read_u8(addr++);
+ dst++;
+ }
+}
+
+/*
+ * mem_flash_wait_until_complete()
+ */
+static void mem_flash_wait_until_complete(void)
+{
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+
+ do {
+ /*
+ * Put a delay here to deal with flash programming problem.
+ */
+ u32 mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
+ while (UBICOM32_IO_TIMER->mptval < mptval)
+ ;
+
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
+ IO_XFL_CTL1_FC_DATA(1);
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR);
+ FLASH_COMMAND_EXEC(io);
+ } while (io->status1 & SR_WIP);
+}
+
+/*
+ * mem_flash_write_next()
+ */
+static size_t mem_flash_write_next(u32 addr, u8 *buf, size_t length)
+{
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+ u32 data_start = addr;
+ u32 data_end = addr + length;
+ size_t count;
+ u32 i, j;
+
+ /*
+ * Top limit address.
+ */
+ u32 block_start = ALIGN_DOWN(data_start, 4);
+ u32 block_end = block_start + EXTFLASH_WRITE_BLOCK_SIZE;
+
+ union {
+ u8 byte[EXTFLASH_WRITE_BLOCK_SIZE];
+ u32 word[EXTFLASH_WRITE_BLOCK_SIZE / 4];
+ } write_buf;
+
+ u32 *flash_addr = (u32 *)block_start;
+
+ /*
+ * The write block must be limited by FLASH internal buffer.
+ */
+ u32 block_end_align = ALIGN_DOWN(block_end, 256);
+ bool write_needed;
+
+ block_end = (block_end_align > block_start)
+ ? block_end_align : block_end;
+ data_end = (data_end <= block_end) ? data_end : block_end;
+ block_end = ALIGN_UP(data_end, 4);
+ count = data_end - data_start;
+
+ /*
+ * Transfer data to a buffer.
+ */
+ for (i = 0; i < (block_end - block_start) / 4; i++) {
+ /*
+ * The FLASH read can hold D-cache for a long time.
+ * Use I/O operation to read FLASH to avoid starving other
+ * threads, especially HRT. (Do this for application only)
+ */
+ write_buf.word[i] = mem_flash_io_read_u32(
+ (u32)(&flash_addr[i]));
+ }
+
+ write_needed = false;
+ for (i = 0, j = (data_start - block_start);
+ i < (data_end - data_start); i++, j++) {
+ write_needed = write_needed || (write_buf.byte[j] != buf[i]);
+ write_buf.byte[j] &= buf[i];
+ }
+
+
+ /*
+ * If the data in FLASH is identical to what to be written. Then skip
+ * it.
+ */
+ if (write_needed) {
+ /*
+ * Write to flash.
+ */
+ void *tmp __attribute__((unused));
+ s32 extra_words;
+
+ asm volatile(
+ " move.4 %0, %2 \n\t"
+ " bset "D(IO_INT_SET)"(%1), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t"
+ " pipe_flush 0 \n\t"
+ " .rept "D(EXTFLASH_WRITE_FIFO_SIZE / 4)" \n\t"
+ " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
+ " .endr \n\t"
+ : "=&a" (tmp)
+ : "a" (io), "r" (&write_buf.word[0])
+ : "memory", "cc"
+ );
+
+ /* Lock FLASH for write access. */
+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
+
+ /* Command: WREN */
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
+ FLASH_COMMAND_EXEC(io);
+
+ /* Command: BYTE PROGRAM */
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) |
+ IO_XFL_CTL1_FC_DATA(block_end - block_start) |
+ IO_XFL_CTL1_FC_ADDR;
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_PP) |
+ IO_XFL_CTL2_FC_ADDR(block_start);
+ FLASH_COMMAND_KICK_OFF(io);
+
+ extra_words = (s32)(block_end - block_start -
+ EXTFLASH_WRITE_FIFO_SIZE) / 4;
+ if (extra_words > 0) {
+ asm volatile(
+ " move.4 %0, %3 \n\t"
+ "1: cmpi "D(IO_FIFO_LEVEL)"(%1), #4 \n\t"
+ " jmpgt.s.t 1b \n\t"
+ " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t"
+ " add.4 %2, #-1, %2 \n\t"
+ " jmpgt.t 1b \n\t"
+ : "=&a" (tmp)
+ : "a" (io), "d" (extra_words),
+ "r" (&write_buf.word[EXTFLASH_WRITE_FIFO_SIZE / 4])
+ : "memory", "cc"
+ );
+ }
+ FLASH_COMMAND_WAIT_FOR_COMPLETION(io);
+
+ mem_flash_wait_until_complete();
+
+
+ /* Unlock FLASH for cache access. */
+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
+ }
+
+ /*
+ * Complete.
+ */
+ return count;
+}
+
+/*
+ * mem_flash_write()
+ */
+static void mem_flash_write(u32 addr, const void *src, size_t length)
+{
+ /*
+ * Write data
+ */
+ u8_t *ptr = (u8_t *)src;
+ while (length) {
+ size_t count = mem_flash_write_next(addr, ptr, length);
+ addr += count;
+ ptr += count;
+ length -= count;
+ }
+}
+
+/*
+ * Service routine to read status register until ready, or timeout occurs.
+ * Returns non-zero if error.
+ */
+static int wait_till_ready(struct m25p *flash)
+{
+ int count;
+ int sr;
+
+ /* one chip guarantees max 5 msec wait here after page writes,
+ * but potentially three seconds (!) after page erase.
+ */
+ for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+ u32 mptval;
+ sr = read_sr(flash);
+ if (sr < 0)
+ break;
+ else if (!(sr & SR_WIP))
+ return 0;
+
+ /*
+ * Put a 10us delay here to deal with flash programming problem.
+ */
+ mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS;
+ while ((s32)(mptval - UBICOM32_IO_TIMER->mptval) > 0) {
+ WATCHDOG_RESET();
+ }
+ /* REVISIT sometimes sleeping would be best */
+ }
+
+ return 1;
+}
+
+/*
+ * mem_flash_erase_page()
+ */
+static void mem_flash_erase_page(u32 addr)
+{
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+
+ /* Lock FLASH for write access. */
+ io->ctl0 |= IO_XFL_CTL0_MCB_LOCK;
+
+ /* Command: WREN */
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD);
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN);
+ FLASH_COMMAND_EXEC(io);
+
+ /* Command: ERASE */
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) |
+ IO_XFL_CTL1_FC_ADDR;
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_SE) |
+ IO_XFL_CTL2_FC_ADDR(addr);
+ FLASH_COMMAND_EXEC(io);
+
+ mem_flash_wait_until_complete();
+
+ /* Unlock FLASH for cache access. */
+ io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK;
+}
+
+/*
+ * mem_flash_erase()
+ */
+static u32 mem_flash_erase(u32 addr, u32 length)
+{
+ /*
+ * Calculate the endaddress to be the first address of the page
+ * just beyond this erase section of pages.
+ */
+ u32 endaddr = addr + length;
+
+ /*
+ * Erase.
+ */
+ while (addr < endaddr) {
+ u32 test_addr = addr;
+ mem_flash_erase_page(addr);
+
+ /*
+ * Test how much was erased as actual flash page at this address
+ * may be smaller than the expected page size.
+ */
+ while (test_addr < endaddr) {
+ /*
+ * The FLASH read can hold D-cache for a long time. Use
+ * I/O operation to read FLASH to avoid starving other
+ * threads, especially HRT. (Do this for application
+ * only)
+ */
+ if (mem_flash_io_read_u32(test_addr) != 0xFFFFFFFF) {
+ break;
+ }
+ test_addr += 4;
+ }
+ if (test_addr == addr) {
+ printk("erase failed at address 0x%x, skipping",
+ test_addr);
+ test_addr += 4;
+ return 1;
+ }
+ addr = test_addr;
+ }
+ return 0;
+}
+
+
+/****************************************************************************/
+
+/*
+ * MTD implementation
+ */
+
+/*
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int ubicom32_flash_driver_erase(struct mtd_info *mtd,
+ struct erase_info *instr)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ u32 addr, len;
+
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
+ flash->plt_dev->dev.bus_id, __FUNCTION__, "at",
+ (u32)instr->addr, instr->len);
+
+ /* sanity checks */
+ if (instr->addr + instr->len > flash->mtd.size)
+ return -EINVAL;
+ if ((instr->addr % mtd->erasesize) != 0
+ || (instr->len % mtd->erasesize) != 0) {
+ return -EINVAL;
+ }
+
+ addr = instr->addr + UBICOM32_FLASH_BASE;
+ len = instr->len;
+
+ mutex_lock(&flash->lock);
+
+ /* REVISIT in some cases we could speed up erasing large regions
+ * by using OPCODE_SE instead of OPCODE_BE_4K
+ */
+
+ /* now erase those sectors */
+ if (mem_flash_erase(addr, len)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
+
+ mutex_unlock(&flash->lock);
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+/*
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ */
+static int ubicom32_flash_driver_read(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ u32 base_addr = UBICOM32_FLASH_BASE + from;
+
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
+ flash->plt_dev->dev.bus_id, __FUNCTION__, "from",
+ (u32)from, len);
+
+ /* sanity checks */
+ if (!len)
+ return 0;
+
+ if (from + len > flash->mtd.size)
+ return -EINVAL;
+
+ /* Byte count starts at zero. */
+ if (retlen)
+ *retlen = 0;
+
+ mutex_lock(&flash->lock);
+
+ /* Wait till previous write/erase is done. */
+ if (wait_till_ready(flash)) {
+ /* REVISIT status return?? */
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ mem_flash_read(base_addr, (void *)buf, len);
+
+ if (retlen)
+ *retlen = len;
+
+ mutex_unlock(&flash->lock);
+
+ return 0;
+}
+
+/*
+ * Write an address range to the flash chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int ubicom32_flash_driver_write(struct mtd_info *mtd, loff_t to,
+ size_t len, size_t *retlen,
+ const u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ u32 base_addr = UBICOM32_FLASH_BASE + to;
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n",
+ flash->plt_dev->dev.bus_id, __FUNCTION__, "to",
+ (u32)to, len);
+
+ if (retlen)
+ *retlen = 0;
+
+ /* sanity checks */
+ if (!len)
+ return 0;
+
+ if (to + len > flash->mtd.size)
+ return -EINVAL;
+
+ mutex_lock(&flash->lock);
+
+ mem_flash_write(base_addr, (void *) buf, len);
+
+ /* Wait until finished previous write command. */
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ if (retlen)
+ *retlen = len;
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+
+/****************************************************************************/
+
+/*
+ * SPI device driver setup and teardown
+ */
+
+struct flash_info {
+ char *name;
+
+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
+ * a high byte of zero plus three data bytes: the manufacturer id,
+ * then a two byte device id.
+ */
+ u32 jedec_id;
+
+ /* The size listed here is what works with OPCODE_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+
+ u16 flags;
+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
+};
+
+
+/* NOTE: double check command sets and memory organization when you add
+ * more flash chips. This current list focusses on newer chips, which
+ * have been converging on command sets which including JEDEC ID.
+ */
+static struct flash_info __devinitdata m25p_data[] = {
+
+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
+
+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
+
+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
+
+ /* Spansion -- single (large) sector size only, at least
+ * for the chips listed here (without boot sectors).
+ */
+ { "s25sl004a", 0x010212, 64 * 1024, 8, },
+ { "s25sl008a", 0x010213, 64 * 1024, 16, },
+ { "s25sl016a", 0x010214, 64 * 1024, 32, },
+ { "s25sl032a", 0x010215, 64 * 1024, 64, },
+ { "s25sl064a", 0x010216, 64 * 1024, 128, },
+
+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
+
+ /* ST Microelectronics -- newer production may have feature updates */
+ { "m25p05", 0x202010, 32 * 1024, 2, },
+ { "m25p10", 0x202011, 32 * 1024, 4, },
+ { "m25p20", 0x202012, 64 * 1024, 4, },
+ { "m25p40", 0x202013, 64 * 1024, 8, },
+ { "m25p80", 0, 64 * 1024, 16, },
+ { "m25p16", 0x202015, 64 * 1024, 32, },
+ { "m25p32", 0x202016, 64 * 1024, 64, },
+ { "m25p64", 0x202017, 64 * 1024, 128, },
+ { "m25p128", 0x202018, 256 * 1024, 64, },
+
+ { "m45pe80", 0x204014, 64 * 1024, 16, },
+ { "m45pe16", 0x204015, 64 * 1024, 32, },
+
+ { "m25pe80", 0x208014, 64 * 1024, 16, },
+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
+
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
+
+ /* Macronix -- mx25lxxx */
+ { "mx25l32", 0xc22016, 64 * 1024, 64, },
+ { "mx25l64", 0xc22017, 64 * 1024, 128, },
+ { "mx25l128", 0xc22018, 64 * 1024, 256, },
+
+};
+
+struct flash_info *__devinit jedec_probe(struct platform_device *spi)
+{
+ int tmp;
+ u32 jedec;
+ struct flash_info *info;
+ struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA;
+
+ /*
+ * Setup and run RDID command on the flash.
+ */
+ io->ctl1 &= ~IO_XFL_CTL1_MASK;
+ io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) |
+ IO_XFL_CTL1_FC_DATA(3);
+ io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDID);
+ FLASH_COMMAND_EXEC(io);
+
+ jedec = io->status1 & 0x00ffffff;
+
+ for (tmp = 0, info = m25p_data;
+ tmp < ARRAY_SIZE(m25p_data);
+ tmp++, info++) {
+ if (info->jedec_id == jedec)
+ return info;
+ }
+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
+ return NULL;
+}
+
+
+/*
+ * board specific setup should have ensured the SPI clock used here
+ * matches what the READ command supports, at least until this driver
+ * understands FAST_READ (for clocks over 25 MHz).
+ */
+static int __devinit ubicom32_flash_probe(struct platform_device *spi)
+{
+ struct flash_platform_data *data;
+ struct m25p *flash;
+ struct flash_info *info;
+ unsigned i;
+
+ /* Platform data helps sort out which chip type we have, as
+ * well as how this board partitions it. If we don't have
+ * a chip ID, try the JEDEC id commands; they'll work for most
+ * newer chips, even if we don't recognize the particular chip.
+ */
+ data = spi->dev.platform_data;
+ if (data && data->type) {
+ for (i = 0, info = m25p_data;
+ i < ARRAY_SIZE(m25p_data);
+ i++, info++) {
+ if (strcmp(data->type, info->name) == 0)
+ break;
+ }
+
+ /* unrecognized chip? */
+ if (i == ARRAY_SIZE(m25p_data)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
+ spi->dev.bus_id, data->type);
+ info = NULL;
+
+ /* recognized; is that chip really what's there? */
+ } else if (info->jedec_id) {
+ struct flash_info *chip = jedec_probe(spi);
+
+ if (!chip || chip != info) {
+ dev_warn(&spi->dev, "found %s, expected %s\n",
+ chip ? chip->name : "UNKNOWN",
+ info->name);
+ info = NULL;
+ }
+ }
+ } else
+ info = jedec_probe(spi);
+
+ if (!info)
+ return -ENODEV;
+
+ flash = kzalloc(sizeof *flash, GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->plt_dev = spi;
+ mutex_init(&flash->lock);
+ dev_set_drvdata(&spi->dev, flash);
+
+ if (data && data->name)
+ flash->mtd.name = data->name;
+ else
+ flash->mtd.name = spi->dev.bus_id;
+
+ flash->mtd.type = MTD_NORFLASH;
+ flash->mtd.writesize = 1;
+ flash->mtd.flags = MTD_CAP_NORFLASH;
+ flash->mtd.size = info->sector_size * info->n_sectors;
+ flash->mtd.erase = ubicom32_flash_driver_erase;
+ flash->mtd.read = ubicom32_flash_driver_read;
+ flash->mtd.write = ubicom32_flash_driver_write;
+
+ /* prefer "small sector" erase if possible */
+ /*
+ * The Ubicom erase code does not use the opcode for smaller sectors,
+ * so disable that functionality and keep erasesize == sector_size
+ * so that the test in ubicom32_flash_driver_erase works properly.
+ *
+ * This was: `if (info->flags & SECT_4K) {' instead of `if (0) {'
+ */
+ if (0) {
+ flash->erase_opcode = OPCODE_BE_4K;
+ flash->mtd.erasesize = 4096;
+ } else {
+ flash->erase_opcode = OPCODE_SE;
+ flash->mtd.erasesize = info->sector_size;
+ }
+
+ dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
+ flash->mtd.size / 1024);
+
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "mtd .name = %s, .size = 0x%.8x (%uMiB) "
+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+ flash->mtd.name,
+ flash->mtd.size, flash->mtd.size / (1024*1024),
+ flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+ flash->mtd.numeraseregions);
+
+ if (flash->mtd.numeraseregions)
+ for (i = 0; i < flash->mtd.numeraseregions; i++)
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "mtd.eraseregions[%d] = { .offset = 0x%.8x, "
+ ".erasesize = 0x%.8x (%uKiB), "
+ ".numblocks = %d }\n",
+ i, flash->mtd.eraseregions[i].offset,
+ flash->mtd.eraseregions[i].erasesize,
+ flash->mtd.eraseregions[i].erasesize / 1024,
+ flash->mtd.eraseregions[i].numblocks);
+
+
+ /* partitions should match sector boundaries; and it may be good to
+ * use readonly partitions for writeprotected sectors (BP2..BP0).
+ */
+ if (mtd_has_partitions()) {
+ struct mtd_partition *parts = NULL;
+ int nr_parts = 0;
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ static const char *part_probes[] = { "cmdlinepart", NULL, };
+
+ nr_parts = parse_mtd_partitions(&flash->mtd,
+ part_probes, &parts, 0);
+#endif
+
+ if (nr_parts <= 0 && data && data->parts) {
+ parts = data->parts;
+ nr_parts = data->nr_parts;
+ if (nr_parts >= 2) {
+ /*
+ * Set last partition size to be 1M.
+ */
+ parts[1].size = flash->mtd.size -
+ parts[0].size - JFFS2_FILESYSTEM_SIZE;
+ parts[2].size = JFFS2_FILESYSTEM_SIZE;
+ }
+ }
+
+ if (nr_parts > 0) {
+ for (i = 0; i < nr_parts; i++) {
+ DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+ "{.name = %s, .offset = 0x%.8x, "
+ ".size = 0x%.8x (%uKiB) }\n",
+ i, parts[i].name,
+ parts[i].offset,
+ parts[i].size,
+ parts[i].size / 1024);
+ }
+ flash->partitioned = 1;
+ return add_mtd_partitions(&flash->mtd, parts, nr_parts);
+ }
+ } else if (data->nr_parts)
+ dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
+ data->nr_parts, data->name);
+
+ return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0;
+}
+
+
+static int __devexit ubicom32_flash_remove(struct spi_device *spi)
+{
+ struct m25p *flash = dev_get_drvdata(&spi->dev);
+ int status;
+
+ /* Clean up MTD stuff. */
+ if (mtd_has_partitions() && flash->partitioned)
+ status = del_mtd_partitions(&flash->mtd);
+ else
+ status = del_mtd_device(&flash->mtd);
+ if (status == 0)
+ kfree(flash);
+ return 0;
+}
+
+static struct platform_driver ubicom32_flash_driver = {
+ .driver = {
+ .name = "ubicom32flashdriver",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ubicom32_flash_probe,
+ .remove = NULL,
+};
+
+static int ubicom32_flash_driver_init(void)
+{
+ return platform_driver_register(&ubicom32_flash_driver);
+}
+
+
+static void ubicom32_flash_driver_exit(void)
+{
+ platform_driver_unregister(&ubicom32_flash_driver);
+}
+
+
+module_init(ubicom32_flash_driver_init);
+module_exit(ubicom32_flash_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("Ubicom32 MTD SPI driver for ST M25Pxx flash chips");
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2463,6 +2463,25 @@ config JME
To compile this driver as a module, choose M here. The module
will be called jme.
+config UBICOM32_GMAC
+ tristate "Ubicom Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on UBICOM32
+ help
+ Gigabit Ethernet support for IP5K/IP7K
+
+config UBICOM32_NAPI
+ bool "USE NAPI (EXPERIMENTAL)"
+ depends on UBICOM32_GMAC
+ help
+ Use NAPI for Ubicom's Ethernet driver
+
+config UBICOM32_OCM_FOR_SKB
+ bool "USE OCM for SKB (EXPERIMENTAL)"
+ depends on UBICOM32_GMAC
+ default n
+ help
+ Allocate skb from OCM for Ethernet Receive
+
endif # NETDEV_1000
#
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
-
+obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
--- /dev/null
+++ b/drivers/net/ubi32-eth.c
@@ -0,0 +1,699 @@
+/*
+ * drivers/net/ubi32-eth.c
+ * Ubicom32 ethernet TIO interface driver.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+/*
+ * ubi32_eth.c
+ * Ethernet driver for Ip5k/Ip7K
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <asm/checksum.h>
+#include "ubi32-eth.h"
+#include <asm/ip5000.h>
+#include <asm/devtree.h>
+#include <asm/system.h>
+
+/* #define USE_POLLING */
+
+/*
+ * TODO:
+ * mac address from flash
+ * multicast filter
+ * ethtool support
+ * sysfs support
+ * skb->nrfrag support
+ * ioctl
+ * monitor phy status
+ */
+
+static const char *eth_if_name[UBI32_ETH_NUM_OF_DEVICES] =
+ {"eth_lan", "eth_wan", "eth_ultra"};
+static struct net_device *ubi32_eth_devices[UBI32_ETH_NUM_OF_DEVICES] =
+ {NULL, NULL, NULL};
+static u8_t mac_addr[UBI32_ETH_NUM_OF_DEVICES][ETH_ALEN] = {
+ {0x00, 0x03, 0x64, 'l', 'a', 'n'},
+ {0x00, 0x03, 0x64, 'w', 'a', 'n'},
+ {0x00, 0x03, 0x64, 'u', 'l', 't'}};
+
+int ubi32_eth_ocm_alloc;
+int ubi32_eth_ddr_alloc;
+
+static inline struct sk_buff *ubi32_alloc_skb(struct net_device *dev, unsigned int length)
+{
+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
+ struct sk_buff *sk_buff;
+
+ if (dev != ubi32_eth_devices[0])
+ return __dev_alloc_skb(length, GFP_ATOMIC);
+
+ sk_buff = __dev_alloc_skb(length, GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
+ if (sk_buff) {
+ ubi32_eth_ocm_alloc++;
+ return sk_buff;
+ } else {
+ ubi32_eth_ddr_alloc++;
+ return __dev_alloc_skb(length, GFP_ATOMIC);
+ }
+#else
+ return __dev_alloc_skb(length, GFP_ATOMIC);
+#endif
+}
+
+static void ubi32_eth_vp_rxtx_enable(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ priv->regs->command = UBI32_ETH_VP_CMD_RX_ENABLE | UBI32_ETH_VP_CMD_TX_ENABLE;
+ priv->regs->int_mask = (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+ ubicom32_set_interrupt(priv->vp_int_bit);
+}
+
+static void ubi32_eth_vp_rxtx_stop(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ priv->regs->command = 0;
+ priv->regs->int_mask = 0;
+ ubicom32_set_interrupt(priv->vp_int_bit);
+
+ /* Wait for graceful shutdown */
+ while (priv->regs->status & (UBI32_ETH_VP_STATUS_RX_STATE | UBI32_ETH_VP_STATUS_TX_STATE));
+}
+
+/*
+ * ubi32_eth_tx_done()
+ */
+static int ubi32_eth_tx_done(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv;
+ struct sk_buff *skb;
+ volatile void *pdata;
+ struct ubi32_eth_dma_desc *desc;
+ u32_t count = 0;
+
+ priv = netdev_priv(dev);
+
+ priv->regs->int_status &= ~UBI32_ETH_VP_INT_TX;
+ while (priv->tx_tail != priv->regs->tx_out) {
+ pdata = priv->regs->tx_dma_ring[priv->tx_tail];
+ BUG_ON(pdata == NULL);
+
+ skb = container_of((void *)pdata, struct sk_buff, cb);
+ desc = (struct ubi32_eth_dma_desc *)pdata;
+ if (unlikely(!(desc->status & UBI32_ETH_VP_TX_OK))) {
+ atomic_inc((atomic_t *)&priv->stats.tx_errors);
+ } else {
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ }
+ dev_kfree_skb_any(skb);
+ priv->regs->tx_dma_ring[priv->tx_tail] = NULL;
+ priv->tx_tail = (priv->tx_tail + 1) & TX_DMA_RING_MASK;
+ count++;
+ }
+
+ if (unlikely(priv->status & UBI32_ETH_PRIV_STATUS_TX_Q_FULL)) {
+ spin_lock(&priv->lock);
+ priv->status &= ~UBI32_ETH_PRIV_STATUS_TX_Q_FULL;
+ netif_wake_queue(dev);
+ spin_unlock(&priv->lock);
+ }
+ return count;
+}
+
+/*
+ * ubi32_eth_receive()
+ * To avoid locking overhead, this is called only
+ * by tasklet when not using NAPI, or
+ * by NAPI poll when using NAPI.
+ * return number of frames processed
+ */
+static int ubi32_eth_receive(struct net_device *dev, int quota)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ unsigned short rx_in = priv->regs->rx_in;
+ struct sk_buff *skb;
+ struct ubi32_eth_dma_desc *desc = NULL;
+ volatile void *pdata;
+
+ /* The number of NET_SKB_PAD bytes are already reserved by skb */
+ int extra_reserve = UBI32_ETH_RESERVE_SPACE - NET_SKB_PAD + UBI32_ETH_RESERVE_EXTRA;
+ int extra_alloc = extra_reserve + UBI32_ETH_TRASHED_MEMORY;
+ int i, replenish_cnt, count = 0;
+ int replenish_max = RX_DMA_MAX_QUEUE_SIZE;
+#if (defined(CONFIG_ZONE_DMA) && defined(CONFIG_UBICOM32_OCM_FOR_SKB))
+ if (dev == ubi32_eth_devices[0])
+ replenish_max = 21;
+#endif
+ BUG_ON((extra_reserve & 3) != NET_IP_ALIGN); /* Must provide NET_IP_ALIGN (0 or 2) */
+
+ if (unlikely(rx_in == priv->regs->rx_out))
+ priv->vp_stats.rx_q_full_cnt++;
+
+ priv->regs->int_status &= ~UBI32_ETH_VP_INT_RX;
+ while (priv->rx_tail != priv->regs->rx_out) {
+ if (unlikely(count == quota)) {
+ /* There is still frame pending to be processed */
+ priv->vp_stats.rx_throttle++;
+ break;
+ }
+
+ pdata = priv->regs->rx_dma_ring[priv->rx_tail];
+ BUG_ON(pdata == NULL);
+
+ desc = (struct ubi32_eth_dma_desc *)pdata;
+ skb = container_of((void *)pdata, struct sk_buff, cb);
+ count++;
+ priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
+ priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
+
+ /*
+ * Check only RX_OK bit here.
+ * The rest of status word is used as timestamp
+ */
+ if (unlikely(!(desc->status & UBI32_ETH_VP_RX_OK))) {
+ priv->stats.rx_errors++;
+ dev_kfree_skb_any(skb);
+ continue;
+ }
+
+ skb_put(skb, desc->data_len);
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ priv->stats.rx_bytes += skb->len;
+ priv->stats.rx_packets++;
+#ifndef CONFIG_UBICOM32_NAPI
+ netif_rx(skb);
+#else
+ netif_receive_skb(skb);
+#endif
+ }
+
+ /* fill in more descripor for VP*/
+ replenish_cnt = replenish_max -
+ ((RX_DMA_RING_SIZE + rx_in - priv->rx_tail) & RX_DMA_RING_MASK);
+ if (replenish_cnt > 0) {
+ for (i = 0; i < replenish_cnt; i++) {
+ skb = ubi32_alloc_skb(dev, RX_BUF_SIZE + extra_alloc);
+ if (!skb) {
+ priv->vp_stats.rx_alloc_err++;
+ break;
+ }
+ /* set up dma descriptor */
+ desc = (struct ubi32_eth_dma_desc *)skb->cb;
+ skb_reserve(skb, extra_reserve);
+ BUG_ON((((u32)skb->data + ETH_HLEN) & (CACHE_LINE_SIZE - 1)) != 0);
+ desc->data_pointer = skb->data;
+ desc->buffer_len = RX_BUF_SIZE + UBI32_ETH_TRASHED_MEMORY;
+ desc->data_len = 0;
+ desc->status = 0;
+ priv->regs->rx_dma_ring[rx_in] = desc;
+ rx_in = (rx_in + 1) & RX_DMA_RING_MASK;
+ }
+ wmb();
+ priv->regs->rx_in = rx_in;
+ ubicom32_set_interrupt(priv->vp_int_bit);
+ }
+
+ if (likely(count > 0)) {
+ dev->last_rx = jiffies;
+ }
+ return count;
+}
+
+#ifdef CONFIG_UBICOM32_NAPI
+static int ubi32_eth_napi_poll(struct napi_struct *napi, int budget)
+{
+ struct ubi32_eth_private *priv = container_of(napi, struct ubi32_eth_private, napi);
+ struct net_device *dev = priv->dev;
+ u32_t count;
+
+ if (priv->tx_tail != priv->regs->tx_out) {
+ ubi32_eth_tx_done(dev);
+ }
+
+ count = ubi32_eth_receive(dev, budget);
+
+ priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+ if (count < budget) {
+ netif_rx_complete(dev, napi);
+ if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
+ if (netif_rx_reschedule(dev, napi)) {
+ priv->regs->int_mask = 0;
+ }
+ }
+ }
+ return count;
+}
+
+#else
+static void ubi32_eth_do_tasklet(unsigned long arg)
+{
+ struct net_device *dev = (struct net_device *)arg;
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+
+ if (priv->tx_tail != priv->regs->tx_out) {
+ ubi32_eth_tx_done(dev);
+ }
+
+ /* always call receive to process new RX frame as well as replenish RX buffers */
+ ubi32_eth_receive(dev, RX_BOUND);
+
+ priv->regs->int_mask |= (UBI32_ETH_VP_INT_RX | UBI32_ETH_VP_INT_TX);
+ if ((priv->rx_tail != priv->regs->rx_out) || (priv->tx_tail != priv->regs->tx_out)) {
+ priv->regs->int_mask = 0;
+ tasklet_schedule(&priv->tsk);
+ }
+}
+#endif
+
+#if defined(USE_POLLING)
+static struct timer_list eth_poll_timer;
+
+static void ubi32_eth_poll(unsigned long arg)
+{
+ struct net_device *dev;
+ struct ubi32_eth_private *priv;
+ int i;
+
+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+ dev = ubi32_eth_devices[i];
+ if (dev && (dev->flags & IFF_UP)) {
+ priv = netdev_priv(dev);
+#ifdef CONFIG_UBICOM32_NAPI
+ netif_rx_schedule(dev, &priv->napi);
+#else
+ tasklet_schedule(&priv->tsk);
+#endif
+ }
+ }
+
+ eth_poll_timer.expires = jiffies + 2;
+ add_timer(&eth_poll_timer);
+}
+
+#else
+static irqreturn_t ubi32_eth_interrupt(int irq, void *dev_id)
+{
+ struct ubi32_eth_private *priv;
+
+ struct net_device *dev = (struct net_device *)dev_id;
+ BUG_ON(irq != dev->irq);
+
+ priv = netdev_priv(dev);
+ if (unlikely(!(priv->regs->int_status & priv->regs->int_mask))) {
+ return IRQ_NONE;
+ }
+
+ /*
+ * Disable port interrupt
+ */
+#ifdef CONFIG_UBICOM32_NAPI
+ if (netif_rx_schedule_prep(dev, &priv->napi)) {
+ priv->regs->int_mask = 0;
+ __netif_rx_schedule(dev, &priv->napi);
+ }
+#else
+ priv->regs->int_mask = 0;
+ tasklet_schedule(&priv->tsk);
+#endif
+ return IRQ_HANDLED;
+}
+#endif
+
+/*
+ * ubi32_eth_open
+ */
+static int ubi32_eth_open(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ int err;
+
+ printk(KERN_INFO "eth open %s\n",dev->name);
+#ifndef USE_POLLING
+ /* request_region() */
+ err = request_irq(dev->irq, ubi32_eth_interrupt, IRQF_DISABLED, dev->name, dev);
+ if (err) {
+ printk(KERN_WARNING "fail to request_irq %d\n",err);
+ return -ENODEV;
+ }
+#endif
+#ifdef CONFIG_UBICOM32_NAPI
+ napi_enable(&priv->napi);
+#else
+ tasklet_init(&priv->tsk, ubi32_eth_do_tasklet, (unsigned long)dev);
+#endif
+
+ /* call receive to supply RX buffers */
+ ubi32_eth_receive(dev, RX_DMA_MAX_QUEUE_SIZE);
+
+ /* check phy status and call netif_carrier_on */
+ ubi32_eth_vp_rxtx_enable(dev);
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int ubi32_eth_close(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ volatile void *pdata;
+ struct sk_buff *skb;
+
+#ifndef USE_POLLING
+ free_irq(dev->irq, dev);
+#endif
+ netif_stop_queue(dev); /* can't transmit any more */
+#ifdef CONFIG_UBICOM32_NAPI
+ napi_disable(&priv->napi);
+#else
+ tasklet_kill(&priv->tsk);
+#endif
+ ubi32_eth_vp_rxtx_stop(dev);
+
+ /*
+ * RX clean up
+ */
+ while (priv->rx_tail != priv->regs->rx_in) {
+ pdata = priv->regs->rx_dma_ring[priv->rx_tail];
+ skb = container_of((void *)pdata, struct sk_buff, cb);
+ priv->regs->rx_dma_ring[priv->rx_tail] = NULL;
+ dev_kfree_skb_any(skb);
+ priv->rx_tail = ((priv->rx_tail + 1) & RX_DMA_RING_MASK);
+ }
+ priv->regs->rx_in = 0;
+ priv->regs->rx_out = priv->regs->rx_in;
+ priv->rx_tail = priv->regs->rx_in;
+
+ /*
+ * TX clean up
+ */
+ BUG_ON(priv->regs->tx_out != priv->regs->tx_in);
+ ubi32_eth_tx_done(dev);
+ BUG_ON(priv->tx_tail != priv->regs->tx_in);
+ priv->regs->tx_in = 0;
+ priv->regs->tx_out = priv->regs->tx_in;
+ priv->tx_tail = priv->regs->tx_in;
+
+ return 0;
+}
+
+/*
+ * ubi32_eth_set_config
+ */
+static int ubi32_eth_set_config(struct net_device *dev, struct ifmap *map)
+{
+ /* if must to down to config it */
+ printk(KERN_INFO "set_config %x\n", dev->flags);
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ /* I/O and IRQ can not be changed */
+ if (map->base_addr != dev->base_addr) {
+ printk(KERN_WARNING "%s: Can't change I/O address\n", dev->name);
+ return -EOPNOTSUPP;
+ }
+
+#ifndef USE_POLLING
+ if (map->irq != dev->irq) {
+ printk(KERN_WARNING "%s: Can't change IRQ\n", dev->name);
+ return -EOPNOTSUPP;
+ }
+#endif
+
+ /* ignore other fields */
+ return 0;
+}
+
+static int ubi32_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ struct ubi32_eth_dma_desc *desc = NULL;
+ unsigned short space, tx_in;
+
+ tx_in = priv->regs->tx_in;
+
+ dev->trans_start = jiffies; /* save the timestamp */
+ space = TX_DMA_RING_MASK - ((TX_DMA_RING_SIZE + tx_in - priv->tx_tail) & TX_DMA_RING_MASK);
+
+ if (unlikely(space == 0)) {
+ atomic_inc((atomic_t *)&priv->stats.tx_errors);
+ if (!(priv->status & UBI32_ETH_PRIV_STATUS_TX_Q_FULL)) {
+ spin_lock(&priv->lock);
+ priv->status |= UBI32_ETH_PRIV_STATUS_TX_Q_FULL;
+ priv->vp_stats.tx_q_full_cnt++;
+ netif_stop_queue(dev);
+ spin_unlock(&priv->lock);
+ }
+
+ /* give both HW and this driver an extra trigger */
+ priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
+#ifndef USE_POLLING
+ ubicom32_set_interrupt(dev->irq);
+#endif
+ ubicom32_set_interrupt(priv->vp_int_bit);
+
+ return NETDEV_TX_BUSY;
+ }
+
+ /*still have room */
+ desc = (struct ubi32_eth_dma_desc *)skb->cb;
+ desc->data_pointer = skb->data;
+ desc->data_len = skb->len;
+ priv->regs->tx_dma_ring[tx_in] = desc;
+ tx_in = ((tx_in + 1) & TX_DMA_RING_MASK);
+ wmb();
+ priv->regs->tx_in = tx_in;
+ /* kick the HRT */
+ ubicom32_set_interrupt(priv->vp_int_bit);
+
+ return 0;
+}
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void ubi32_eth_tx_timeout (struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ atomic_inc((atomic_t *)&priv->stats.tx_errors);
+ priv->regs->int_mask |= UBI32_ETH_VP_INT_TX;
+#ifndef USE_POLLING
+ ubicom32_set_interrupt(dev->irq);
+#endif
+ ubicom32_set_interrupt(priv->vp_int_bit);
+}
+
+static int ubi32_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ printk(KERN_INFO "ioctl %s, %d\n", dev->name, cmd);
+ return -EINVAL;
+}
+
+/*
+ * Return statistics to the caller
+ */
+static struct net_device_stats *ubi32_eth_get_stats(struct net_device *dev)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+
+static int ubi32_eth_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct ubi32_eth_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if ((new_mtu < 68) || (new_mtu > 1500))
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ dev->mtu = new_mtu;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ printk(KERN_INFO "set mtu to %d", new_mtu);
+ return 0;
+}
+
+/*
+ * ubi32_eth_cleanup: unload the module
+ */
+void ubi32_eth_cleanup(void)
+{
+ struct ubi32_eth_private *priv;
+ struct net_device *dev;
+ int i;
+
+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+ dev = ubi32_eth_devices[i];
+ if (dev) {
+ priv = netdev_priv(dev);
+ kfree(priv->regs->tx_dma_ring);
+ unregister_netdev(dev);
+ free_netdev(dev);
+ ubi32_eth_devices[i] = NULL;
+ }
+ }
+}
+
+int ubi32_eth_init_module(void)
+{
+ struct ethtionode *eth_node;
+ struct net_device *dev;
+ struct ubi32_eth_private *priv;
+ int i, err;
+
+ /*
+ * Device allocation.
+ */
+ err = 0;
+ for (i = 0; i < UBI32_ETH_NUM_OF_DEVICES; i++) {
+ /*
+ * See if the eth_vp is in the device tree.
+ */
+ eth_node = (struct ethtionode *)devtree_find_node(eth_if_name[i]);
+ if (!eth_node) {
+ printk(KERN_INFO "%s does not exist\n", eth_if_name[i]);
+ continue;
+ }
+
+ eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
+ sizeof(struct ubi32_eth_dma_desc *) *
+ (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_ATOMIC | __GFP_NOWARN | __GFP_NORETRY | GFP_DMA);
+
+ if (eth_node->tx_dma_ring == NULL) {
+ eth_node->tx_dma_ring = (struct ubi32_eth_dma_desc **)kmalloc(
+ sizeof(struct ubi32_eth_dma_desc *) *
+ (TX_DMA_RING_SIZE + RX_DMA_RING_SIZE), GFP_KERNEL);
+ printk(KERN_INFO "Failed to allocate from OCM\n");
+ }
+
+ if (!eth_node->tx_dma_ring) {
+ err = -ENOMEM;
+ break;
+ }
+ eth_node->rx_dma_ring = eth_node->tx_dma_ring + TX_DMA_RING_SIZE;
+ eth_node->tx_sz = TX_DMA_RING_SIZE - 1;
+ eth_node->rx_sz = RX_DMA_RING_SIZE - 1;
+
+ dev = alloc_etherdev(sizeof(struct ubi32_eth_private));
+ if (!dev) {
+ kfree(eth_node->tx_dma_ring);
+ err = -ENOMEM;
+ break;
+ }
+ priv = netdev_priv(dev);
+ priv->dev = dev;
+
+ /*
+ * FIX IT! get proper mac address
+ */
+ memcpy(dev->dev_addr, mac_addr[i], ETH_ALEN);
+
+ priv->regs = eth_node;
+ priv->regs->command = 0;
+ priv->regs->int_mask = 0;
+ priv->regs->int_status = 0;
+ priv->regs->tx_out = 0;
+ priv->regs->rx_out = 0;
+ priv->regs->tx_in = 0;
+ priv->regs->rx_in = 0;
+ priv->rx_tail = 0;
+ priv->tx_tail = 0;
+
+ priv->vp_int_bit = eth_node->dn.sendirq;
+ dev->irq = eth_node->dn.recvirq;
+
+ spin_lock_init(&priv->lock);
+
+ dev->open = ubi32_eth_open;
+ dev->stop = ubi32_eth_close;
+ dev->hard_start_xmit = ubi32_eth_start_xmit;
+ dev->tx_timeout = ubi32_eth_tx_timeout;
+ dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT;
+
+ dev->set_config = ubi32_eth_set_config;
+ dev->do_ioctl = ubi32_eth_ioctl;
+ dev->get_stats = ubi32_eth_get_stats;
+ dev->change_mtu = ubi32_eth_change_mtu;
+#ifdef CONFIG_UBICOM32_NAPI
+ netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
+#endif
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_WARNING "Failed to register netdev %s\n", eth_if_name[i]);
+ //release_region();
+ free_netdev(dev);
+ kfree(eth_node->tx_dma_ring);
+ break;
+ }
+
+ ubi32_eth_devices[i] = dev;
+ printk(KERN_INFO "%s vp_base:0x%p, tio_int:%d irq:%d\n",
+ dev->name, priv->regs, eth_node->dn.sendirq, dev->irq);
+ }
+
+ if (err) {
+ ubi32_eth_cleanup();
+ return err;
+ }
+
+ if (!ubi32_eth_devices[0] && !ubi32_eth_devices[1] && !ubi32_eth_devices[2]) {
+ return -ENODEV;
+ }
+
+#if defined(USE_POLLING)
+ init_timer(&eth_poll_timer);
+ eth_poll_timer.function = ubi32_eth_poll;
+ eth_poll_timer.data = (unsigned long)0;
+ eth_poll_timer.expires = jiffies + 2;
+ add_timer(&eth_poll_timer);
+#endif
+
+ return 0;
+}
+
+module_init(ubi32_eth_init_module);
+module_exit(ubi32_eth_cleanup);
+
+MODULE_AUTHOR("Kan Yan, Greg Ren");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/ubi32-eth.h
@@ -0,0 +1,133 @@
+/*
+ * drivers/net/ubi32-eth.h
+ * Ubicom32 ethernet TIO interface driver definitions.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#ifndef _UBI32_ETH_H
+#define _UBI32_ETH_H
+
+#include <asm/devtree.h>
+
+#define UBI32_ETH_NUM_OF_DEVICES 3
+
+/*
+ * Number of bytes trashed beyond the packet data.
+ */
+#define UBI32_ETH_TRASHED_MEMORY (CACHE_LINE_SIZE + ETH_HLEN - 1)
+
+/*
+ * Linux already reserves NET_SKB_PAD bytes of headroom in each sk_buff.
+ * We want to be able to reserve arbitrarily more space to align Ethernet
+ * and IP header to cache line.
+ * Note that the TIO expects a CACHE_LINE_SIZE - ETH_HLEN aligned Ethernet
+ * header, so the reserved space must be NET_SKB_PAD + NET_IP_ALIGN.
+ * (NET_SKB_PAD is 16, NET_IP_ALIGN is 2, CACHE_LINE_SIZE is 32).
+ * You can add more space by making UBI32_ETH_iRESERVE_EXTRA != 0.
+ */
+#define UBI32_ETH_RESERVE_SPACE (CACHE_LINE_SIZE - ETH_HLEN)
+#define UBI32_ETH_RESERVE_EXTRA (1 * CACHE_LINE_SIZE)
+
+struct ubi32_eth_dma_desc {
+ volatile void *data_pointer; /* pointer to the buffer */
+ volatile u16 buffer_len; /* the buffer size */
+ volatile u16 data_len; /* actual frame length */
+ volatile u32 status; /* bit0: status to be update by VP; bit[31:1] time stamp */
+};
+
+#define TX_DMA_RING_SIZE (1<<8)
+#define TX_DMA_RING_MASK (TX_DMA_RING_SIZE - 1)
+#define RX_DMA_RING_SIZE (1<<8)
+#define RX_DMA_RING_MASK (RX_DMA_RING_SIZE - 1)
+
+#define RX_DMA_MAX_QUEUE_SIZE (RX_DMA_RING_SIZE - 1) /* no more than (RX_DMA_RING_SIZE - 1) */
+#define RX_MAX_PKT_SIZE (ETH_DATA_LEN + ETH_HLEN + VLAN_HLEN)
+#define RX_MIN_PKT_SIZE ETH_ZLEN
+#define RX_BUF_SIZE (RX_MAX_PKT_SIZE + VLAN_HLEN) /* allow double VLAN tag */
+
+#define UBI32_ETH_VP_TX_TIMEOUT (10*HZ)
+
+struct ubi32_eth_vp_stats {
+ u32 rx_alloc_err;
+ u32 tx_q_full_cnt;
+ u32 rx_q_full_cnt;
+ u32 rx_throttle;
+};
+
+struct ubi32_eth_private {
+ struct net_device *dev;
+ struct net_device_stats stats;
+ struct ubi32_eth_vp_stats vp_stats;
+ int status;
+ spinlock_t lock;
+#ifdef CONFIG_UBICOM32_NAPI
+ struct napi_struct napi;
+#else
+ struct tasklet_struct tsk;
+#endif
+ struct ethtionode *regs;
+ u16 rx_tail;
+ u16 tx_tail;
+ u32 vp_int_bit;
+};
+
+struct ethtionode {
+ struct devtree_node dn;
+ volatile u16 command;
+ volatile u16 status;
+ volatile u16 int_mask; /* interrupt mask */
+ volatile u16 int_status; /* interrupt mask */
+ volatile u16 tx_in; /* owned by driver */
+ volatile u16 tx_out; /* owned by vp */
+ volatile u16 rx_in; /* owned by driver */
+ volatile u16 rx_out; /* owned by vp */
+ u16 tx_sz; /* owned by driver */
+ u16 rx_sz; /* owned by driver */
+ struct ubi32_eth_dma_desc **tx_dma_ring;
+ struct ubi32_eth_dma_desc **rx_dma_ring;
+};
+
+#define UBI32_ETH_VP_STATUS_LINK (1<<0)
+#define UBI32_ETH_VP_STATUS_SPEED (0x2<<1)
+#define UBI32_ETH_VP_STATUS_DUPLEX (0x1<<3)
+#define UBI32_ETH_VP_STATUS_FLOW_CTRL (0x1<<4)
+
+#define UBI32_ETH_VP_STATUS_RX_STATE (0x1<<5)
+#define UBI32_ETH_VP_STATUS_TX_STATE (0x1<<6)
+
+#define UBI32_ETH_PRIV_STATUS_TX_Q_FULL (1<<0)
+
+#define UBI32_ETH_VP_INT_RX (1<<0)
+#define UBI32_ETH_VP_INT_TX (1<<1)
+
+#define UBI32_ETH_VP_CMD_RX_ENABLE (1<<0)
+#define UBI32_ETH_VP_CMD_TX_ENABLE (1<<1)
+
+#define UBI32_ETH_VP_RX_OK (1<<0)
+#define UBI32_ETH_VP_TX_OK (1<<1)
+
+#define TX_BOUND TX_DMA_RING_SIZE
+#define RX_BOUND 64
+#define UBI32_ETH_NAPI_WEIGHT 64 /* for GigE */
+#endif
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -318,14 +318,33 @@ static int asix_rx_fixup(struct usbnet *
/* get the packet length */
size = (u16) (header & 0x0000ffff);
- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ if (((u32)packet & 0x02) == 0) {
+ memmove(packet - 2, packet, size);
+ skb->data -= 2;
+ skb->tail -= 2;
+ }
+#endif
return 2;
+ }
+
if (size > ETH_FRAME_LEN) {
deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
return 0;
}
ax_skb = skb_clone(skb, GFP_ATOMIC);
if (ax_skb) {
+#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ if (((u32)packet & 0x02) == 0) {
+ memmove(packet - 2, packet, size);
+ ax_skb->data = packet - 2;
+ } else {
+ ax_skb->data = packet;
+ }
+#else
+ ax_skb->data = packet;
+#endif
ax_skb->len = size;
ax_skb->data = packet;
skb_set_tail_pointer(ax_skb, size);
@@ -1102,13 +1121,19 @@ static int ax88178_link_reset(struct usb
mode = AX88178_MEDIUM_DEFAULT;
if (ecmd.speed == SPEED_1000)
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
mode |= AX_MEDIUM_GM;
+#else
+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
+#endif
else if (ecmd.speed == SPEED_100)
mode |= AX_MEDIUM_PS;
else
mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
mode |= AX_MEDIUM_ENCK;
+#endif
if (ecmd.duplex == DUPLEX_FULL)
mode |= AX_MEDIUM_FD;
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -240,10 +240,11 @@ static void oprofile_end_trace(struct op
cpu_buf->tracing = 0;
}
-void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
- unsigned long event, int is_kernel)
+
+void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel, int cpu)
{
- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
+ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
if (!backtrace_depth) {
log_sample(cpu_buf, pc, is_kernel, event);
@@ -260,6 +261,13 @@ void oprofile_add_ext_sample(unsigned lo
oprofile_end_trace(cpu_buf);
}
+void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel)
+{
+ oprofile_add_ext_sample_cpu(pc, regs, event,
+ is_kernel, smp_processor_id());
+}
+
void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
{
int is_kernel = !user_mode(regs);
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,8 +42,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
obj-$(CONFIG_MN10300) += setup-bus.o
+obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
-#
# ACPI Related PCI FW Functions
#
obj-$(CONFIG_ACPI) += pci-acpi.o
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -827,6 +827,57 @@ config SERIAL_UARTLITE_CONSOLE
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
+config SERIAL_UBI32_UARTTIO
+ tristate "Ubicom UARTTIO support"
+ depends on UBICOM32=y
+ select SERIAL_CORE
+ default y
+ help
+ Add support for the Ubicom virtual peripherial serial interface.
+
+config SERIAL_UBI32_UARTTIO_NR_UARTS
+ int "Maximum number of UARTTIO virtual serial ports"
+ depends on SERIAL_UBI32_UARTTIO
+ default "4"
+ help
+ Set this to the maximum number of serial ports you want the driver to support.
+
+config SERIAL_UBI32_UARTTIO_CONSOLE
+ tristate "Ubicom UARTTIO console support"
+ depends on SERIAL_UBI32_UARTTIO=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ help
+ Add support for console on the Ubicom virtual peripherial serial interface.
+
+config SERIAL_UBI32_SERDES
+ bool "Ubicom serial port support"
+ depends on UBICOM32=y
+ select SERIAL_CORE
+ default y
+ help
+ Add support for the Ubicom serial interface.
+
+config SERIAL_UBI32_SERDES_CONSOLE
+ bool "Ubicom serial console support"
+ depends on SERIAL_UBI32_SERDES=y
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config SERIAL_UBI32_MAILBOX
+ bool "Ubicom mailbox support"
+ depends on UBICOM32=y
+ select SERIAL_CORE
+ default n
+ help
+ Add support for the Ubicom mailbox interface.
+
+config SERIAL_UBI32_MAILBOX_CONSOLE
+ bool "Ubicom mailbox console support"
+ depends on SERIAL_UBI32_MAILBOX=y
+ select SERIAL_CORE_CONSOLE
+ default y
+
config SERIAL_SUNCORE
bool
depends on SPARC
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -73,3 +73,6 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
+obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
+obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
--- /dev/null
+++ b/drivers/serial/ubi32_mailbox.c
@@ -0,0 +1,928 @@
+/*
+ * drivers/serial/ubi32_mailbox.c
+ * Ubicom32 On-Chip Mailbox Driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/ip5000.h>
+
+#define SERIAL_UBICOM_BAUDRATE 115200
+#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
+#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
+#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
+
+/* UART name and device definitions */
+#define UBI32_MAILBOX_NAME "ttyUM" // XXX
+#define UBI32_MAILBOX_MAJOR 207 // XXX
+#define UBI32_MAILBOX_MINOR 64
+
+#define PORT_UBI32_MAILBOX 1235
+#define NR_PORTS 1
+
+#define get_sclk() 0
+
+struct ubi32_mailbox_port {
+ struct uart_port port;
+ /*
+ * NOTE (rkeller):
+ * the uart port is wrapped in another structure in case we need to hold more state than
+ * what we can hold in the uart_port.
+ * Not sure if we need this, I took over the concept from the blackfin driver.
+ */
+} ubi32_mailbox_ports[NR_PORTS];
+
+struct ubi32_mailbox_resource {
+ int uart_base_addr;
+ int uart_irq;
+} ubi32_mailbox_resource[NR_PORTS] = {
+ /*
+ * uart_base_addr has to be non-NULL because it is put in the uart_port membase.
+ * If membase if null the kernel skips the configuration and our port_type never gets set.
+ */
+ {ISD_MAILBOX_BASE, ISD_MAILBOX_INT}
+};
+
+static volatile struct ubicom32_isd_mailbox {
+ volatile u32_t in;
+ volatile u32_t out;
+ volatile u32_t status;
+} *ubi32_mailbox = (struct ubicom32_isd_mailbox *)ISD_MAILBOX_BASE;
+
+static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart);
+
+static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart);
+
+#define TRUE 1
+#define FALSE 0
+
+static int mailbox_console_flg = TRUE;
+static int num_timeouts = 0;
+
+/*
+ * dummy functions and defined to be able to compile the Blackfin code
+ */
+#define UART_GET_LSR(port) (1)
+#define UART_PUT_LSR(port, bits)
+#define UART_CLEAR_LSR(port) (1)
+#define TEMT 1
+#define TFI 1
+#define BI 1
+#define PE 1
+#define OE 1
+#define FE 1
+#define THRE 1
+#define DR 1
+#define UART_GET_LCR(port) (1)
+#define UART_PUT_LCR(port, bits)
+#define SB 1
+#define STB 1
+#define PEN 1
+#define EPS 1
+#define STP 1
+#define WLS(n) 0
+#define UART_GET_IER(port) (1)
+#define UART_SET_IER(port, bits)
+#define UART_CLEAR_IER(port, bits)
+#define ETBEI 0
+#define ERBFI 0
+#define UART_GET_CHAR(port) ubi32_mailbox_get_char()
+#define UART_PUT_CHAR(port, ch) ubi32_mailbox_put_char(ch)
+#define SSYNC()
+#define UART_GET_DLL(port) 0
+#define UART_PUT_DLL(port, ch)
+#define UART_GET_DLH(port) 0
+#define UART_PUT_DLH(port, ch)
+#define UART_GET_GCTL(port) (0)
+#define UART_PUT_GCTL(port, ch)
+#define UCEN 1
+
+/*
+ * ubi32_mailbox_get_char_avail()
+ */
+static int ubi32_mailbox_get_char_avail(void)
+{
+ return !(ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
+}
+
+/*
+ * ubi32_mailbox_get_char()
+ */
+static u32_t ubi32_mailbox_get_char(void)
+{
+ if (mailbox_console_flg == TRUE) {
+ /*
+ * Mailbox console is connected.
+ */
+ while (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY);
+ return ubi32_mailbox->in & 0xff;
+ }
+
+ /*
+ * Mailbox console was not connected.
+ */
+ if (ubi32_mailbox->status & ISD_MAILBOX_STATUS_IN_EMPTY) {
+ return 0xff;
+ }
+
+ /*
+ * Mailbox console is connecting.
+ */
+ mailbox_console_flg = TRUE;
+ num_timeouts = 0;
+ return ubi32_mailbox->in & 0xff;
+}
+
+#define MAILBOX_MAX_ATTEMPTS 1000000
+#define MAILBOX_MAX_TIMEOUTS 5
+/*
+ * ubi32_mailbox_put_char()
+ */
+static void ubi32_mailbox_put_char(u32_t v)
+{
+ /*
+ * Wait to be able to output.
+ */
+ u32_t num_attempts = 0;
+
+ if(mailbox_console_flg == TRUE) {
+ while(num_attempts++ < MAILBOX_MAX_ATTEMPTS) {
+ if(ubi32_mailbox->status & ISD_MAILBOX_STATUS_OUT_EMPTY) {
+ break;
+ }
+ }
+
+ /*
+ * If timed out more than 5 times on send, mailbox console is disconnected now.
+ */
+ if (num_attempts > MAILBOX_MAX_ATTEMPTS) {
+ if (num_timeouts++ > MAILBOX_MAX_TIMEOUTS) {
+ mailbox_console_flg = FALSE;
+ }
+ }
+ }
+
+ asm volatile(
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ "pipe_flush 0 \n\t"
+ );
+
+ ubi32_mailbox->out = v & 0xff;
+}
+
+static void ubi32_mailbox_hw_init(struct ubi32_mailbox_port *uart)
+{
+// NOTE: It does not do any good to do these here because we are running on the linux hardware thread,
+// and these have to be called on the ldsr thread.
+// ubicom32_clear_interrupt(ISD_MAILBOX_INT);
+// ubicom32_enable_interrupt(ISD_MAILBOX_INT);
+}
+
+/*
+ * interrupts are disabled on entry
+ */
+static void ubi32_mailbox_stop_tx(struct uart_port *port)
+{
+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+// struct circ_buf *xmit = &uart->port.info->xmit;
+
+ while (!(UART_GET_LSR(uart) & TEMT))
+ cpu_relax();
+
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+ UART_CLEAR_IER(uart, ETBEI);
+}
+
+/*
+ * port is locked and interrupts are disabled
+ */
+static void ubi32_mailbox_start_tx(struct uart_port *port)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+
+ UART_SET_IER(uart, ETBEI);
+
+ ubi32_mailbox_tx_chars(uart);
+}
+
+/*
+ * Interrupts are enabled
+ */
+static void ubi32_mailbox_stop_rx(struct uart_port *port)
+{
+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+ UART_CLEAR_IER(uart, ERBFI);
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void ubi32_mailbox_enable_ms(struct uart_port *port)
+{
+}
+
+static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
+{
+ struct uart_info *info = uart->port.info;
+ struct tty_struct *tty = info->port.tty;
+ unsigned int status, ch, flg;
+
+ status = 0; // XXX? UART_GET_LSR(uart);
+ UART_CLEAR_LSR(uart);
+
+ ch = UART_GET_CHAR(uart);
+
+ if(ch == 0xff)
+ return;
+
+ uart->port.icount.rx++;
+
+ if (status & BI) {
+ uart->port.icount.brk++;
+ if (uart_handle_break(&uart->port))
+ goto ignore_char;
+ status &= ~(PE | FE);
+ }
+ if (status & PE)
+ uart->port.icount.parity++;
+ if (status & OE)
+ uart->port.icount.overrun++;
+ if (status & FE)
+ uart->port.icount.frame++;
+
+ status &= uart->port.read_status_mask;
+
+ if (status & BI)
+ flg = TTY_BREAK;
+ else if (status & PE)
+ flg = TTY_PARITY;
+ else if (status & FE)
+ flg = TTY_FRAME;
+ else
+ flg = TTY_NORMAL;
+
+ if (uart_handle_sysrq_char(&uart->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&uart->port, status, OE, ch, flg);
+
+ ignore_char:
+ tty_flip_buffer_push(tty);
+}
+
+static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart)
+{
+ struct circ_buf *xmit = &uart->port.info->xmit;
+
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ }
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ ubi32_mailbox_mctrl_check(uart);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
+ ubi32_mailbox_stop_tx(&uart->port);
+ return;
+ }
+
+ while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
+ UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx++;
+ SSYNC();
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uart->port);
+
+ if (uart_circ_empty(xmit))
+ ubi32_mailbox_stop_tx(&uart->port);
+}
+
+static irqreturn_t ubi32_mailbox_isr(int irq, void *dev_id)
+{
+ struct ubi32_mailbox_port *uart = dev_id;
+
+ spin_lock(&uart->port.lock);
+
+ //XXX?while (UART_GET_LSR(uart) & DR)
+
+ /*
+ * RX process
+ */
+ while (ubi32_mailbox_get_char_avail()) {
+ ubi32_mailbox_rx_chars(uart);
+ }
+
+#if 0
+ /*
+ * TX process
+ */
+ if (this_uart.tx_in == this_uart.tx_out) {
+ UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask &= ~IO_PORTX_INT_SERDES_TXBE;
+ } else if (UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_status & IO_PORTX_INT_SERDES_TXBE) {
+ uart_ubicom32_send(this_uart.tx_buf[this_uart.tx_out & (SERIAL_UBICOM_BUF_SIZE - 1)]);
+ this_uart.tx_out++;
+ UBICOM32_IO_PORT(SERIAL_UBICOM_PORT)->int_mask |= IO_PORTX_INT_SERDES_TXBE;
+ }
+#endif
+
+ spin_unlock(&uart->port.lock);
+
+ return IRQ_HANDLED;
+}
+#if 0
+static irqreturn_t ubi32_mailbox_tx_int(int irq, void *dev_id)
+{
+ struct ubi32_mailbox_port *uart = dev_id;
+
+ spin_lock(&uart->port.lock);
+ if (UART_GET_LSR(uart) & THRE)
+ ubi32_mailbox_tx_chars(uart);
+ spin_unlock(&uart->port.lock);
+
+ return IRQ_HANDLED;
+}
+#endif
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int ubi32_mailbox_tx_empty(struct uart_port *port)
+{
+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+ unsigned short lsr;
+
+ lsr = UART_GET_LSR(uart);
+ if (lsr & TEMT)
+ return TIOCSER_TEMT;
+ else
+ return 0;
+}
+
+static unsigned int ubi32_mailbox_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void ubi32_mailbox_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void ubi32_mailbox_mctrl_check(struct ubi32_mailbox_port *uart)
+{
+}
+
+/*
+ * Interrupts are always disabled.
+ */
+static void ubi32_mailbox_break_ctl(struct uart_port *port, int break_state)
+{
+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+ u16 lcr = UART_GET_LCR(uart);
+ if (break_state)
+ lcr |= SB;
+ else
+ lcr &= ~SB;
+ UART_PUT_LCR(uart, lcr);
+ SSYNC();
+}
+
+static int ubi32_mailbox_startup(struct uart_port *port)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+
+ if (request_irq(uart->port.irq, ubi32_mailbox_isr, IRQF_DISABLED,
+ "UBI32_MAILBOX", uart)) {
+ printk(KERN_NOTICE "Unable to attach Ubicom32 SERDES interrupt\n");
+ return -EBUSY;
+ }
+
+ UART_SET_IER(uart, ERBFI);
+ return 0;
+}
+
+static void ubi32_mailbox_shutdown(struct uart_port *port)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+
+ free_irq(uart->port.irq, uart);
+}
+
+static void
+ubi32_mailbox_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+ unsigned long flags;
+ unsigned int baud, quot;
+ unsigned short val, ier, lsr, lcr = 0;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS8:
+ lcr = WLS(8);
+ break;
+ case CS7:
+ lcr = WLS(7);
+ break;
+ case CS6:
+ lcr = WLS(6);
+ break;
+ case CS5:
+ lcr = WLS(5);
+ break;
+ default:
+ printk(KERN_ERR "%s: word lengh not supported\n",
+ __FUNCTION__);
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ lcr |= STB;
+ if (termios->c_cflag & PARENB)
+ lcr |= PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= EPS;
+ if (termios->c_cflag & CMSPAR)
+ lcr |= STP;
+
+ port->read_status_mask = OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (FE | PE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= BI;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= FE | PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= OE;
+ }
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+ spin_lock_irqsave(&uart->port.lock, flags);
+
+ do {
+ lsr = UART_GET_LSR(uart);
+ } while (!(lsr & TEMT));
+
+ /* Disable UART */
+ ier = UART_GET_IER(uart);
+ UART_CLEAR_IER(uart, 0xF);
+
+ UART_PUT_DLL(uart, quot & 0xFF);
+ SSYNC();
+ UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
+ SSYNC();
+
+ UART_PUT_LCR(uart, lcr);
+
+ /* Enable UART */
+ UART_SET_IER(uart, ier);
+
+ val = UART_GET_GCTL(uart);
+ val |= UCEN;
+ UART_PUT_GCTL(uart, val);
+
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+}
+
+static const char *ubi32_mailbox_type(struct uart_port *port)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+
+ return uart->port.type == PORT_UBI32_MAILBOX ? "UBI32_MAILBOX" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void ubi32_mailbox_release_port(struct uart_port *port)
+{
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int ubi32_mailbox_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void ubi32_mailbox_config_port(struct uart_port *port, int flags)
+{
+ struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+
+ if (flags & UART_CONFIG_TYPE && ubi32_mailbox_request_port(&uart->port) == 0)
+ uart->port.type = PORT_UBI32_MAILBOX;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_UBI32_MAILBOX and PORT_UNKNOWN
+ */
+static int
+ubi32_mailbox_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return 0;
+}
+
+static struct uart_ops ubi32_mailbox_pops = {
+ .tx_empty = ubi32_mailbox_tx_empty,
+ .set_mctrl = ubi32_mailbox_set_mctrl,
+ .get_mctrl = ubi32_mailbox_get_mctrl,
+ .stop_tx = ubi32_mailbox_stop_tx,
+ .start_tx = ubi32_mailbox_start_tx,
+ .stop_rx = ubi32_mailbox_stop_rx,
+ .enable_ms = ubi32_mailbox_enable_ms,
+ .break_ctl = ubi32_mailbox_break_ctl,
+ .startup = ubi32_mailbox_startup,
+ .shutdown = ubi32_mailbox_shutdown,
+ .set_termios = ubi32_mailbox_set_termios,
+ .type = ubi32_mailbox_type,
+ .release_port = ubi32_mailbox_release_port,
+ .request_port = ubi32_mailbox_request_port,
+ .config_port = ubi32_mailbox_config_port,
+ .verify_port = ubi32_mailbox_verify_port,
+};
+
+static void __init ubi32_mailbox_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ ubi32_mailbox_ports[i].port.uartclk = get_sclk();
+ ubi32_mailbox_ports[i].port.ops = &ubi32_mailbox_pops;
+ ubi32_mailbox_ports[i].port.line = i;
+ ubi32_mailbox_ports[i].port.iotype = UPIO_MEM;
+ ubi32_mailbox_ports[i].port.membase =
+ (void __iomem *)ubi32_mailbox_resource[i].uart_base_addr;
+ ubi32_mailbox_ports[i].port.mapbase =
+ ubi32_mailbox_resource[i].uart_base_addr;
+ ubi32_mailbox_ports[i].port.irq =
+ ubi32_mailbox_resource[i].uart_irq;
+ ubi32_mailbox_ports[i].port.flags = UPF_BOOT_AUTOCONF;
+ spin_lock_init(&ubi32_mailbox_ports[i].port.lock);
+
+ ubi32_mailbox_hw_init(&ubi32_mailbox_ports[i]);
+ }
+
+}
+
+#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+ubi32_mailbox_console_get_options(struct ubi32_mailbox_port *uart, int *baud,
+ int *parity, int *bits)
+{
+ unsigned short status;
+
+ status = UART_GET_IER(uart) & (ERBFI | ETBEI);
+ if (status == (ERBFI | ETBEI)) {
+ /* ok, the port was enabled */
+ unsigned short lcr;
+ unsigned short dlh, dll;
+
+ lcr = UART_GET_LCR(uart);
+
+ *parity = 'n';
+ if (lcr & PEN) {
+ if (lcr & EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+ switch (lcr & 0x03) {
+ case 0: *bits = 5; break;
+ case 1: *bits = 6; break;
+ case 2: *bits = 7; break;
+ case 3: *bits = 8; break;
+ }
+
+ dll = UART_GET_DLL(uart);
+ dlh = UART_GET_DLH(uart);
+
+ *baud = get_sclk() / (16*(dll | dlh << 8));
+ }
+ pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static struct uart_driver ubi32_mailbox_reg;
+
+static int __init
+ubi32_mailbox_console_setup(struct console *co, char *options)
+{
+ struct ubi32_mailbox_port *uart;
+# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
+ int baud = SERIAL_UBICOM_BAUDRATE;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+# endif
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= NR_PORTS)
+ co->index = 0;
+ uart = &ubi32_mailbox_ports[co->index];
+
+# ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ ubi32_mailbox_console_get_options(uart, &baud, &parity, &bits);
+
+ //JB return uart_set_options(&uart->port, co, baud, parity, bits, flow);
+ return 0;
+# else
+ return 0;
+# endif
+}
+#endif /* defined (CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE
+static void ubi32_mailbox_console_putchar(struct uart_port *port, int ch)
+{
+// struct ubi32_mailbox_port *uart = (struct ubi32_mailbox_port *)port;
+ while (!(UART_GET_LSR(uart) & THRE))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+ubi32_mailbox_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[co->index];
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, ubi32_mailbox_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
+}
+
+static struct console ubi32_mailbox_console = {
+ .name = UBI32_MAILBOX_NAME,
+ .write = ubi32_mailbox_console_write,
+ .device = uart_console_device,
+ .setup = ubi32_mailbox_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ubi32_mailbox_reg,
+};
+
+static int __init ubi32_mailbox_console_init(void)
+{
+ ubi32_mailbox_init_ports();
+ register_console(&ubi32_mailbox_console);
+ return 0;
+}
+console_initcall(ubi32_mailbox_console_init);
+
+#define UBI32_MAILBOX_CONSOLE &ubi32_mailbox_console
+#else
+#define UBI32_MAILBOX_CONSOLE NULL
+#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
+
+
+#ifdef CONFIG_EARLY_PRINTK
+static __init void ubi32_mailbox_early_putc(struct uart_port *port, int ch)
+{
+ UART_PUT_CHAR(uart, ch);
+}
+
+static __init void ubi32_mailbox_early_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct ubi32_mailbox_port *uart = &ubi32_mailbox_ports[con->index];
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ ubi32_mailbox_early_putc(&uart->port, '\r');
+ ubi32_mailbox_early_putc(&uart->port, *s);
+ }
+}
+
+static struct __init console ubi32_mailbox_early_console = {
+ .name = "early_UM",
+ .write = ubi32_mailbox_early_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .setup = ubi32_mailbox_console_setup,
+ .index = -1,
+ .data = &ubi32_mailbox_reg,
+};
+
+/*
+ * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
+ */
+struct console __init *ubi32_mailbox_early_init(unsigned int port,
+ unsigned int cflag)
+{
+ struct ubi32_mailbox_port *uart;
+ struct ktermios t;
+
+ if (port == -1 || port >= NR_PORTS)
+ port = 0;
+ ubi32_mailbox_init_ports();
+ ubi32_mailbox_early_console.index = port;
+ uart = &ubi32_mailbox_ports[port];
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port;
+ ubi32_mailbox_set_termios(&uart->port, &t, &t);
+ return &ubi32_mailbox_early_console;
+}
+
+#endif /* CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE */
+
+static struct uart_driver ubi32_mailbox_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ubi32_mailbox",
+ .dev_name = UBI32_MAILBOX_NAME,
+ .major = UBI32_MAILBOX_MAJOR,
+ .minor = UBI32_MAILBOX_MINOR,
+ .nr = NR_PORTS,
+ .cons = UBI32_MAILBOX_CONSOLE,
+};
+
+static int ubi32_mailbox_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
+
+ if (uart)
+ uart_suspend_port(&ubi32_mailbox_reg, &uart->port);
+
+ return 0;
+}
+
+static int ubi32_mailbox_resume(struct platform_device *dev)
+{
+ struct ubi32_mailbox_port *uart = platform_get_drvdata(dev);
+
+ if (uart)
+ uart_resume_port(&ubi32_mailbox_reg, &uart->port);
+
+ return 0;
+}
+
+static int ubi32_mailbox_probe(struct platform_device *dev)
+{
+ struct resource *res = dev->resource;
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++, res++)
+ if (res->flags & IORESOURCE_MEM)
+ break;
+
+ if (i < dev->num_resources) {
+ for (i = 0; i < NR_PORTS; i++, res++) {
+ if (ubi32_mailbox_ports[i].port.mapbase != res->start)
+ continue;
+ ubi32_mailbox_ports[i].port.dev = &dev->dev;
+ uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[i].port);
+ platform_set_drvdata(dev, &ubi32_mailbox_ports[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int ubi32_mailbox_remove(struct platform_device *pdev)
+{
+ struct ubi32_mailbox_port *uart = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (uart)
+ uart_remove_one_port(&ubi32_mailbox_reg, &uart->port);
+
+ return 0;
+}
+
+static struct platform_driver ubi32_mailbox_driver = {
+ .probe = ubi32_mailbox_probe,
+ .remove = ubi32_mailbox_remove,
+ .suspend = ubi32_mailbox_suspend,
+ .resume = ubi32_mailbox_resume,
+ .driver = {
+ .name = "ubi32-mbox",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ubi32_mailbox_init(void)
+{
+ int ret;
+
+ pr_info("Serial: Ubicom32 mailbox serial driver.\n");
+
+ mailbox_console_flg = TRUE;
+ num_timeouts = 0;
+ ubi32_mailbox_init_ports();
+
+ ret = uart_register_driver(&ubi32_mailbox_reg);
+ if (ret == 0) {
+ ret = platform_driver_register(&ubi32_mailbox_driver);
+ if (ret) {
+ pr_debug("uart register failed\n");
+ uart_unregister_driver(&ubi32_mailbox_reg);
+ }
+ }
+
+ /*
+ * XXX HACK: currently probe does not get called, but the port needs to be added to work.
+ */
+ uart_add_one_port(&ubi32_mailbox_reg, &ubi32_mailbox_ports[0].port);
+ return ret;
+}
+
+static void __exit ubi32_mailbox_exit(void)
+{
+ platform_driver_unregister(&ubi32_mailbox_driver);
+ uart_unregister_driver(&ubi32_mailbox_reg);
+}
+
+module_init(ubi32_mailbox_init);
+module_exit(ubi32_mailbox_exit);
+
+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_MAILBOX_MAJOR);
+MODULE_ALIAS("platform:ubi32_mailbox");
--- /dev/null
+++ b/drivers/serial/ubi32_serdes.c
@@ -0,0 +1,817 @@
+/*
+ * drivers/serial/ubi32_serdes.c
+ * Ubicom32 On-Chip Serial Driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/ip5000.h>
+#include <asm/ubicom32suart.h>
+
+
+#define SERIAL_UBICOM_PIN_RXD (1 << 0)
+#define SERIAL_UBICOM_PIN_TXD (1 << 6)
+#define SERIAL_UBICOM_CTL0 0x8b300000
+#define SERIAL_UBICOM_CTL1 0x00000009
+
+#define SERIAL_UBICOM_DATA_BIT 8 /* Fixed parameter - do not change */
+#define SERIAL_UBICOM_PAR_BIT 0 /* Fixed parameter - do not change */
+#define SERIAL_UBICOM_STOP_BIT 1 /* Fixed parameter - do not change */
+
+/* UART name and device definitions */
+#define UBI32_SERDES_NAME "ttyUS" // XXX
+#define UBI32_SERDES_MAJOR 206 // XXX
+#define UBI32_SERDES_MINOR 64 // XXX
+
+#define PORT_UBI32_SERDES 1234
+#define NR_PORTS 1
+
+struct uart_port ubi32_serdes_ports[NR_PORTS];
+
+struct ubi32_serdes_resource {
+ void *uart_base_addr;
+ int uart_irq;
+ int uart_clock;
+} ubi32_serdes_resource[NR_PORTS] = {
+ /*
+ * Get params from kernel command line (required for early printk)
+ * or from platform resources.
+ */
+ {0, 0, 0}
+};
+
+/*
+ * Can get overridden by 'serdes=' kernel command line.
+ */
+static int ubi32_serdes_default_baud_rate = 115200;
+
+
+#define IO_PORT(port) ((struct ubicom32_io_port *)port->membase)
+#define IO_PORT_INT_STATUS(port) (IO_PORT(port)->int_status)
+#define IO_PORT_INT_MASK(port) (IO_PORT(port)->int_mask)
+#define IO_PORT_INT_CLR(port) (IO_PORT(port)->int_clr)
+
+
+/*
+ * ubi32_serdes_get_char()
+ */
+static u8_t ubi32_serdes_get_char(struct ubicom32_io_port *io_port)
+{
+ /*
+ * Read from hardware (forced 32-bit atomic read).
+ */
+ u32_t data = 0;
+
+ if ( io_port ) {
+ io_port->int_clr = IO_PORTX_INT_SERDES_RXBF;
+ asm volatile (
+ "move.4 %0, %1 \n\t"
+ : "=r" (data)
+ : "m" (*(u32_t *)&(io_port->rx_fifo))
+ );
+ }
+
+ return (u8_t)(data & 0x000000ff);
+}
+
+/*
+ * ubi32_serdes_put_char()
+ */
+static void ubi32_serdes_put_char(struct ubicom32_io_port *io_port, u8_t c)
+{
+ u32_t data = 0x0000fe00 | (c << 1);
+
+ if ( io_port ) {
+ /*
+ * Fixed data format:
+ * [LSB]1 start bit - 8 data bits - no parity - 1 stop bit[MSB]
+ */
+ io_port->int_clr = IO_PORTX_INT_SERDES_TXBE;
+ io_port->ctl2 = data;
+ io_port->int_set = IO_PORTX_INT_SERDES_TXBUF_VALID;
+ }
+}
+
+static void ubi32_serdes_hw_init(struct uart_port *port, int baud)
+{
+ struct ubicom32_io_port *io_port = IO_PORT(port);
+
+ if ( io_port ) {
+ /*
+ * Put port functions 1-4 into reset state.
+ * Function 0 (GPIO) does not need or have a reset bit.
+ *
+ * Select SERDES function for restart below.
+ */
+ io_port->function =
+ IO_FUNC_FUNCTION_RESET(1) | IO_FUNC_FUNCTION_RESET(2) |
+ IO_FUNC_FUNCTION_RESET(3) | IO_FUNC_FUNCTION_RESET(4) |
+ IO_PORTX_FUNC_SERDES;
+
+ /*
+ * Configure SERDES baudrate
+ */
+ if ( baud == 0 ) {
+ baud = ubi32_serdes_default_baud_rate;
+ }
+
+ io_port->ctl0 =
+ SERIAL_UBICOM_CTL0 |
+ ((port->uartclk / (16 * baud)) - 1);
+
+ io_port->ctl1 =
+ SERIAL_UBICOM_CTL1;
+
+ /*
+ * don't interrupt until startup and start_tx
+ */
+ io_port->int_mask = 0;
+
+ /*
+ * Set TXD pin output, RXD input and prevent GPIO
+ * override on the TXD & RXD pins
+ */
+ io_port->gpio_ctl &= ~SERIAL_UBICOM_PIN_RXD;
+ io_port->gpio_ctl |= SERIAL_UBICOM_PIN_TXD;
+ io_port->gpio_mask &= ~(SERIAL_UBICOM_PIN_RXD | SERIAL_UBICOM_PIN_TXD);
+
+ /*
+ * Restart (un-reset) the port's SERDES function.
+ */
+ io_port->function &= ~(IO_FUNC_FUNCTION_RESET(IO_PORTX_FUNC_SERDES));
+ }
+}
+
+#define ULITE_STATUS_RXVALID IO_PORTX_INT_SERDES_RXBF
+#define ULITE_STATUS_OVERRUN 0
+#define ULITE_STATUS_FRAME 0
+#define ULITE_STATUS_PARITY 0
+#define ULITE_STATUS_TXEMPTY IO_PORTX_INT_SERDES_TXBE
+#define ULITE_STATUS_TXFULL 0
+
+static int ubi32_serdes_receive(struct uart_port *port, int stat)
+{
+ struct tty_struct *tty = port->info->port.tty;
+ unsigned char ch = 0;
+ char flag = TTY_NORMAL;
+
+ if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
+ | ULITE_STATUS_FRAME)) == 0)
+ return 0;
+
+ /* stats */
+ if (stat & ULITE_STATUS_RXVALID) {
+ port->icount.rx++;
+ ch = ubi32_serdes_get_char((struct ubicom32_io_port *)port->membase);
+
+ if (stat & ULITE_STATUS_PARITY)
+ port->icount.parity++;
+ }
+
+ if (stat & ULITE_STATUS_OVERRUN)
+ port->icount.overrun++;
+
+ if (stat & ULITE_STATUS_FRAME)
+ port->icount.frame++;
+
+
+ /* drop byte with parity error if IGNPAR specificed */
+ if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
+ stat &= ~ULITE_STATUS_RXVALID;
+
+ stat &= port->read_status_mask;
+
+ if (stat & ULITE_STATUS_PARITY)
+ flag = TTY_PARITY;
+
+ stat &= ~port->ignore_status_mask;
+
+ if (stat & ULITE_STATUS_RXVALID)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (stat & ULITE_STATUS_FRAME)
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+
+ if (stat & ULITE_STATUS_OVERRUN)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ return 1;
+}
+
+/*
+ * interrupts are disabled on entry
+ */
+static void ubi32_serdes_stop_tx(struct uart_port *port)
+{
+ IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) & ~IO_PORTX_INT_SERDES_TXBE;
+}
+
+static int ubi32_serdes_transmit(struct uart_port *port, int stat)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (!(stat & IO_PORTX_INT_SERDES_TXBE))
+ return 0;
+
+ if (port->x_char) {
+ ubi32_serdes_put_char(IO_PORT(port), port->x_char);
+ port->x_char = 0;
+ port->icount.tx++;
+ return 1;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ ubi32_serdes_stop_tx(port);
+ return 0;
+ }
+
+ ubi32_serdes_put_char(IO_PORT(port), xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
+ port->icount.tx++;
+
+ /* wake up */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ ubi32_serdes_stop_tx(port);
+
+ return 1;
+}
+
+/*
+ * port is locked and interrupts are disabled
+ */
+static void ubi32_serdes_start_tx(struct uart_port *port)
+{
+ IO_PORT_INT_MASK(port) = IO_PORT_INT_MASK(port) | IO_PORTX_INT_SERDES_TXBE;
+ ubi32_serdes_transmit(port, IO_PORT_INT_STATUS(port));
+}
+
+/*
+ * Interrupts are enabled
+ */
+static void ubi32_serdes_stop_rx(struct uart_port *port)
+{
+ /* don't forward any more data (like !CREAD) */
+ port->ignore_status_mask = IO_PORTX_INT_SERDES_RXBF;
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void ubi32_serdes_enable_ms(struct uart_port *port)
+{
+ /* N/A */
+}
+
+static irqreturn_t ubi32_serdes_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ int busy;
+
+ spin_lock(&port->lock);
+
+ do {
+ int stat = IO_PORT_INT_STATUS(port);
+ busy = ubi32_serdes_receive(port, stat);
+ busy |= ubi32_serdes_transmit(port, stat);
+ } while (busy);
+
+ tty_flip_buffer_push(port->info->port.tty);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int ubi32_serdes_tx_empty(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&port->lock, flags);
+ ret = IO_PORT_INT_STATUS(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ubi32_serdes_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void ubi32_serdes_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* N/A */
+}
+
+/*
+ * Interrupts are always disabled.
+ */
+static void ubi32_serdes_break_ctl(struct uart_port *port, int break_state)
+{
+ /* N/A */
+}
+
+static int ubi32_serdes_startup(struct uart_port *port)
+{
+ if (request_irq(port->irq, ubi32_serdes_isr, IRQF_DISABLED,
+ "UBI32_SERDES", port)) {
+ printk(KERN_NOTICE "Unable to attach port interrupt\n");
+ return -EBUSY;
+ }
+
+ IO_PORT_INT_CLR(port) = IO_PORTX_INT_SERDES_RXBF;
+ IO_PORT_INT_MASK(port) = IO_PORTX_INT_SERDES_RXBF;
+ return 0;
+}
+
+static void ubi32_serdes_shutdown(struct uart_port *port)
+{
+ struct ubi32_serdes_port *uart = (struct ubi32_serdes_port *)port;
+
+ IO_PORT_INT_MASK(port) = 0;
+ free_irq(port->irq, uart);
+}
+
+static void
+ubi32_serdes_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
+ | ULITE_STATUS_TXFULL;
+
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |=
+ ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
+
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ULITE_STATUS_PARITY
+ | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
+
+ /* ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |=
+ ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
+ | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
+
+ /* update timeout */
+ baud = uart_get_baud_rate(port, termios, old, 0, 460800);
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ IO_PORT(port)->ctl0 = SERIAL_UBICOM_CTL0 |
+ ((port->uartclk / (16 * baud)) - 1);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *ubi32_serdes_type(struct uart_port *port)
+{
+ return port->type == PORT_UBI32_SERDES ? "UBI32_SERDES" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void ubi32_serdes_release_port(struct uart_port *port)
+{
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int ubi32_serdes_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void ubi32_serdes_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE &&
+ ubi32_serdes_request_port(port) == 0)
+ port->type = PORT_UBI32_SERDES;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_UBI32_SERDES and PORT_UNKNOWN
+ */
+static int
+ubi32_serdes_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return 0;
+}
+
+static struct uart_ops ubi32_serdes_pops = {
+ .tx_empty = ubi32_serdes_tx_empty,
+ .set_mctrl = ubi32_serdes_set_mctrl,
+ .get_mctrl = ubi32_serdes_get_mctrl,
+ .stop_tx = ubi32_serdes_stop_tx,
+ .start_tx = ubi32_serdes_start_tx,
+ .stop_rx = ubi32_serdes_stop_rx,
+ .enable_ms = ubi32_serdes_enable_ms,
+ .break_ctl = ubi32_serdes_break_ctl,
+ .startup = ubi32_serdes_startup,
+ .shutdown = ubi32_serdes_shutdown,
+ .set_termios = ubi32_serdes_set_termios,
+ .type = ubi32_serdes_type,
+ .release_port = ubi32_serdes_release_port,
+ .request_port = ubi32_serdes_request_port,
+ .config_port = ubi32_serdes_config_port,
+ .verify_port = ubi32_serdes_verify_port,
+};
+
+static void __init ubi32_serdes_init_ports(void)
+{
+ int i;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ ubi32_serdes_ports[i].uartclk = ubi32_serdes_resource[i].uart_clock;
+ ubi32_serdes_ports[i].ops = &ubi32_serdes_pops;
+ ubi32_serdes_ports[i].line = i;
+ ubi32_serdes_ports[i].iotype = UPIO_MEM;
+ ubi32_serdes_ports[i].membase =
+ (void __iomem *)ubi32_serdes_resource[i].uart_base_addr;
+ ubi32_serdes_ports[i].mapbase =
+ (resource_size_t)ubi32_serdes_resource[i].uart_base_addr;
+ ubi32_serdes_ports[i].irq =
+ ubi32_serdes_resource[i].uart_irq;
+ ubi32_serdes_ports[i].flags = UPF_BOOT_AUTOCONF;
+
+ ubi32_serdes_hw_init(&ubi32_serdes_ports[i], 0);
+ }
+
+}
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+ubi32_serdes_console_get_options(struct uart_port *port, int *baud)
+{
+ u32 round_to = 1200;
+ u32 real_baud;
+
+ /*
+ * We might get called before platform init and with no
+ * kernel command line options, so port might be NULL.
+ */
+ *baud = ubi32_serdes_default_baud_rate;;
+ if ( IO_PORT(port) == 0 )
+ return;
+
+ real_baud = port->uartclk
+ / (16 * ((IO_PORT(port)->ctl0 & ~SERIAL_UBICOM_CTL0) + 1));
+
+ *baud = ((real_baud + round_to - 1) / round_to) * round_to;
+
+ pr_debug("%s:baud = %d, real_baud = %d\n", __FUNCTION__, *baud, real_baud);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_UBI32_SERDES_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static struct uart_driver ubi32_serdes_reg;
+
+static int __init
+ubi32_serdes_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
+ int baud = ubi32_serdes_default_baud_rate;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+#endif
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= NR_PORTS)
+ co->index = 0;
+ port = &ubi32_serdes_ports[co->index];
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ ubi32_serdes_hw_init(port, baud);
+ }
+ else
+ ubi32_serdes_console_get_options(port, &baud);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+#else
+ return 0;
+#endif
+}
+#endif /* defined (CONFIG_SERIAL_UBI32_SERDES_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_UBI32_SERDES_CONSOLE
+static void
+ubi32_serdes_console_putchar(struct uart_port *port, int ch)
+{
+ if ( IO_PORT(port) ) {
+ while (!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE))
+ barrier();
+ ubi32_serdes_put_char(IO_PORT(port), ch);
+ }
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+ubi32_serdes_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &ubi32_serdes_ports[co->index];
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_console_write(port, s, count, ubi32_serdes_console_putchar);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+}
+
+static struct console ubi32_serdes_console = {
+ .name = UBI32_SERDES_NAME,
+ .write = ubi32_serdes_console_write,
+ .device = uart_console_device,
+ .setup = ubi32_serdes_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ubi32_serdes_reg,
+};
+
+static int __init ubi32_serdes_console_init(void)
+{
+ ubi32_serdes_init_ports();
+ register_console(&ubi32_serdes_console);
+ return 0;
+}
+console_initcall(ubi32_serdes_console_init);
+
+#define UBI32_SERDES_CONSOLE &ubi32_serdes_console
+#else
+#define UBI32_SERDES_CONSOLE NULL
+#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
+
+
+#ifdef CONFIG_EARLY_PRINTK
+static __init void ubi32_serdes_early_putc(struct uart_port *port, int ch)
+{
+ unsigned timeout = 0xffff;
+
+ while ((!(IO_PORT_INT_STATUS(port) & IO_PORTX_INT_SERDES_TXBE)) && --timeout)
+ cpu_relax();
+ ubi32_serdes_put_char(IO_PORT(port), ch);
+}
+
+static __init void ubi32_serdes_early_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct uart_port *port = &ubi32_serdes_ports[con->index];
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ ubi32_serdes_early_putc(port, '\r');
+ ubi32_serdes_early_putc(port, *s);
+ }
+}
+
+static struct __init console ubi32_serdes_early_console = {
+ .name = "early_US",
+ .write = ubi32_serdes_early_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .setup = ubi32_serdes_console_setup,
+ .index = -1,
+ .data = &ubi32_serdes_reg,
+};
+
+/*
+ * XXX Unused in our driver. Need to find out what the termios initialization is good/needed for.
+ */
+struct console __init *ubi32_serdes_early_init(unsigned int port_index,
+ unsigned int cflag)
+{
+ struct uart_port *uart;
+ struct ktermios t;
+
+ if (port_index == -1 || port_index >= NR_PORTS)
+ port_index = 0;
+ ubi32_serdes_init_ports();
+ ubi32_serdes_early_console.index = port_index;
+ uart = &ubi32_serdes_ports[port_index];
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port_index;
+ ubi32_serdes_set_termios(uart, &t, &t);
+ return &ubi32_serdes_early_console;
+}
+
+#endif /* CONFIG_SERIAL_UBI32_SERDES_CONSOLE */
+
+static struct uart_driver ubi32_serdes_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ubi32_serdes",
+ .dev_name = UBI32_SERDES_NAME,
+ .major = UBI32_SERDES_MAJOR,
+ .minor = UBI32_SERDES_MINOR,
+ .nr = NR_PORTS,
+ .cons = UBI32_SERDES_CONSOLE,
+};
+
+static int ubi32_serdes_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct uart_port *port = platform_get_drvdata(dev);
+
+ if (port)
+ uart_suspend_port(&ubi32_serdes_reg, port);
+
+ return 0;
+}
+
+static int ubi32_serdes_resume(struct platform_device *dev)
+{
+ struct uart_port *port = platform_get_drvdata(dev);
+
+ if (port)
+ uart_resume_port(&ubi32_serdes_reg, port);
+
+ return 0;
+}
+
+static int ubi32_serdes_probe(struct platform_device *dev)
+{
+ struct resource *res = dev->resource;
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++, res++) {
+ if (res->flags & IORESOURCE_MEM) {
+ ubi32_serdes_resource[0].uart_base_addr = (void *) res->start;
+ }
+ else if (res->flags & IORESOURCE_IRQ) {
+ ubi32_serdes_resource[0].uart_irq = res->start;
+ }
+ else if (res->flags & UBICOM32_SUART_IORESOURCE_CLOCK) {
+ ubi32_serdes_resource[0].uart_clock = res->start;
+ }
+ }
+
+ ubi32_serdes_init_ports();
+
+ return 0;
+}
+
+static int ubi32_serdes_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (port)
+ uart_remove_one_port(&ubi32_serdes_reg, port);
+
+ return 0;
+}
+
+static struct platform_driver ubi32_serdes_driver = {
+ .remove = ubi32_serdes_remove,
+ .suspend = ubi32_serdes_suspend,
+ .resume = ubi32_serdes_resume,
+ .driver = {
+ .name = "ubicom32suart",
+ .owner = THIS_MODULE,
+ },
+};
+
+
+#ifndef MODULE
+/*
+ * Called at boot time.
+ *
+ * You can specify IO base, IRQ, and clock for the serdes serial port
+ * using kernel command line "serdes=0xiobase,irq,clock". Values
+ * specified will be overwritten by platform device data, if present.
+ */
+static int __init ubi32_serdes_setup(char *str)
+{
+#define N_PARMS (4+1)
+ int ints[N_PARMS];
+ int i;
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+
+ for (i = 0; i < N_PARMS; i++) {
+ if (i < ints[0]) {
+ if (i == 0) {
+ ubi32_serdes_resource[0].uart_base_addr = (void *) ints[i+1];
+ }
+ else if (i == 1) {
+ ubi32_serdes_resource[0].uart_irq = ints[i+1];
+ }
+ else if (i == 2) {
+ ubi32_serdes_resource[0].uart_clock = ints[i+1];
+ }
+ else if (i == 3) {
+ ubi32_serdes_default_baud_rate = ints[i+1];
+ }
+ }
+ }
+ return 1;
+}
+
+__setup("serdes=", ubi32_serdes_setup);
+#endif
+
+static int __init ubi32_serdes_init(void)
+{
+ int ret;
+
+ pr_info("Serial: Ubicom32 serdes uart serial driver\n");
+
+ ret = platform_driver_probe(&ubi32_serdes_driver, ubi32_serdes_probe);
+ if (ret != 0) {
+ printk(KERN_INFO "serdes platform_driver_probe() failed: %d\n", ret);
+ return ret;
+ }
+
+ ubi32_serdes_init_ports();
+
+ ret = uart_register_driver(&ubi32_serdes_reg);
+ if ( ret == 0 ) {
+ ret = uart_add_one_port(&ubi32_serdes_reg, &ubi32_serdes_ports[0]);
+ if ( ret != 0 ) {
+ uart_unregister_driver(&ubi32_serdes_reg);
+ }
+ }
+
+ return ret;
+}
+
+static void __exit ubi32_serdes_exit(void)
+{
+ platform_driver_unregister(&ubi32_serdes_driver);
+ uart_unregister_driver(&ubi32_serdes_reg);
+}
+
+module_init(ubi32_serdes_init);
+module_exit(ubi32_serdes_exit);
+
+MODULE_AUTHOR("Rainer Keller <rkeller@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom generic serial port driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_SERDES_MAJOR);
+MODULE_ALIAS("platform:ubi32_serdes");
--- /dev/null
+++ b/drivers/serial/ubi32_uarttio.c
@@ -0,0 +1,1171 @@
+/*
+ * drivers/serial/ubi32_uarttio.c
+ * Ubicom32 Serial Virtual Peripherial Driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/ip5000.h>
+#include <asm/gpio.h>
+#include <asm/thread.h>
+#include <asm/uart_tio.h>
+
+#define DRIVER_NAME "ubi32_uarttio"
+
+/*
+ * For storing the module parameters.
+ */
+#define UBI32_UARTTIO_MAX_PARAM_LEN 80
+static char utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN];
+
+/*
+ * UART name and device definitions
+ */
+#define UBI32_UARTTIO_NAME "ttyUV" // XXX
+#define UBI32_UARTTIO_MAJOR 206 // XXX
+#define UBI32_UARTTIO_MINOR 64 // XXX
+
+/*
+ * The following structures are allocated statically because the
+ * memory allocation subsystem is not initialized this early on
+ */
+
+/*
+ * Per port structure
+ */
+struct ubi32_uarttio_port {
+ struct uarttio_uart *uart;
+ unsigned int tx_pin;
+ unsigned int rx_pin;
+
+ struct uart_port port;
+
+ u8_t added;
+
+ /*
+ * If this value is set, the port has had its direction set already
+ */
+ u8_t port_init;
+};
+static struct ubi32_uarttio_port uarttio_ports[CONFIG_SERIAL_UBI32_UARTTIO_NR_UARTS];
+
+/*
+ * Number of ports currently initialized
+ */
+static int uarttio_nports;
+
+/*
+ * Per device structure
+ */
+struct ubi32_uarttio_instance {
+ struct uarttio_regs *regs;
+ struct ubi32_uarttio_port *ports;
+
+ u8_t irq_requested;
+ u8_t driver_registered;
+ u8_t irq;
+};
+static struct ubi32_uarttio_instance uarttio_inst;
+
+#ifdef CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE
+static struct console ubi32_uarttio_console;
+#define UBI32_UARTTIO_CONSOLE &ubi32_uarttio_console
+#else
+#define UBI32_UARTTIO_CONSOLE NULL
+#endif
+
+static struct uart_driver ubi32_uarttio_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = UBI32_UARTTIO_NAME,
+ .major = UBI32_UARTTIO_MAJOR,
+ .minor = UBI32_UARTTIO_MINOR,
+ .cons = UBI32_UARTTIO_CONSOLE,
+};
+
+#ifdef UBI32_UARTTIO_UNUSED
+/*
+ * ubi32_uarttio_get_send_space
+ */
+static int ubi32_uarttio_get_send_space(struct uarttio_uart *uart)
+{
+ int count = uart->tx_fifo_head - uart->tx_fifo_tail;
+ if (count < 0) {
+ count += uart->tx_fifo_size;
+ }
+ return uart->tx_fifo_size - count;
+}
+#endif
+
+/*
+ * ubi32_uarttio_get_recv_ready
+ */
+static int ubi32_uarttio_get_recv_ready(struct uarttio_uart *uart)
+{
+ int count = uart->rx_fifo_head - uart->rx_fifo_tail;
+ if (count < 0) {
+ count += uart->rx_fifo_size;
+ }
+ return count;
+}
+
+/*
+ * ubi32_uarttio_get_char()
+ */
+static u8_t ubi32_uarttio_get_char(struct uarttio_uart *uart)
+{
+ /*
+ * Retrieve byte
+ */
+ u32_t tail = uart->rx_fifo_tail;
+ u8_t data = uart->rx_fifo[tail];
+
+ if (++tail == uart->rx_fifo_size) {
+ tail = 0;
+ }
+ uart->rx_fifo_tail = tail;
+
+ return data;
+}
+
+/*
+ * ubi32_uarttio_put_char()
+ */
+static int ubi32_uarttio_put_char(struct uarttio_uart *uart, u8_t c)
+{
+ u32_t head = uart->tx_fifo_head;
+ u32_t prev = head;
+
+ /*
+ * Wrap
+ */
+ if (++head == uart->tx_fifo_size) {
+ head = 0;
+ }
+
+ /*
+ * If there isn't any space, return EBUSY
+ */
+ if (head == uart->tx_fifo_tail) {
+ return -EBUSY;
+ }
+
+ /*
+ * Put the character in the queue
+ */
+ uart->tx_fifo[prev] = c;
+ uart->tx_fifo_head = head;
+
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_set_baud
+ */
+static int ubi32_uarttio_set_baud(struct ubi32_uarttio_port *uup, unsigned int baud)
+{
+ if (uup->uart->current_baud_rate == baud) {
+ return 0;
+ }
+
+ uup->uart->baud_rate = baud;
+ uup->uart->flags |= UARTTIO_UART_FLAG_SET_RATE;
+ while (uup->uart->flags & UARTTIO_UART_FLAG_SET_RATE) {
+ cpu_relax();
+ }
+
+ if (uup->uart->current_baud_rate != baud) {
+ /*
+ * Failed to set baud rate
+ */
+ printk(KERN_WARNING "Invalid baud rate %u, running at %u\n", baud, uup->uart->current_baud_rate);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_handle_receive
+ */
+static void ubi32_uarttio_handle_receive(struct ubi32_uarttio_port *uup, int stat)
+{
+ struct uarttio_uart *uart = uup->uart;
+ struct uart_port *port = &uup->port;
+ struct tty_struct *tty = port->info->port.tty;
+ unsigned char ch = 0;
+ char flag = TTY_NORMAL;
+ int count;
+
+ if ((stat & (UARTTIO_UART_INT_RX | UARTTIO_UART_INT_RXFRAME | UARTTIO_UART_INT_RXOVF)) == 0) {
+ return;
+ }
+
+ if (stat & UARTTIO_UART_INT_RX) {
+ count = ubi32_uarttio_get_recv_ready(uart);
+ port->icount.rx += count;
+ }
+
+ if (stat & UARTTIO_UART_INT_RXOVF) {
+ port->icount.overrun++;
+ }
+
+ if (stat & UARTTIO_UART_INT_RXFRAME) {
+ port->icount.frame++;
+ }
+
+ stat &= ~port->ignore_status_mask;
+
+ if (stat & UARTTIO_UART_INT_RX) {
+ int i;
+ for (i = 0; i < count; i++) {
+ ch = ubi32_uarttio_get_char(uart);
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ }
+
+ if (stat & UARTTIO_UART_INT_RXFRAME) {
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+ }
+
+ if (stat & UARTTIO_UART_INT_RXOVF) {
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+}
+
+/*
+ * ubi32_uarttio_stop_tx
+ * interrupts are disabled on entry
+ */
+static void ubi32_uarttio_stop_tx(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+
+ uup->uart->int_mask &= ~UARTTIO_UART_INT_TXBE;
+}
+
+/*
+ * ubi32_uarttio_handle_transmit
+ */
+static void ubi32_uarttio_handle_transmit(struct ubi32_uarttio_port *uup, int stat)
+{
+ struct uarttio_uart *uart = uup->uart;
+ struct uart_port *port = &uup->port;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (!(stat & UARTTIO_UART_INT_TXBE)) {
+ return;
+ }
+
+ if (port->x_char) {
+ if (ubi32_uarttio_put_char(uart, port->x_char)) {
+ return;
+ }
+ port->x_char = 0;
+ port->icount.tx++;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ ubi32_uarttio_stop_tx(port);
+ return;
+ }
+
+ /*
+ * Send as many characters as we can
+ */
+ while (ubi32_uarttio_put_char(uart, xmit->buf[xmit->tail]) == 0) {
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit)) {
+ break;
+ }
+ }
+
+ /* wake up */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ uart_write_wakeup(port);
+ }
+
+ if (uart_circ_empty(xmit)) {
+ ubi32_uarttio_stop_tx(port);
+ }
+}
+
+/*
+ * ubi32_uarttio_start_tx
+ * port is locked and interrupts are disabled
+ */
+static void ubi32_uarttio_start_tx(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+ struct uarttio_uart *uart = uup->uart;
+
+ uart->int_mask |= UARTTIO_UART_INT_TXBE;
+}
+
+/*
+ * ubi32_uarttio_stop_rx
+ * Interrupts are enabled
+ */
+static void ubi32_uarttio_stop_rx(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+ struct uarttio_uart *uart = uup->uart;
+
+ /*
+ * don't forward any more data (like !CREAD)
+ */
+ uart->int_mask &= ~UARTTIO_UART_INT_RX;
+ port->ignore_status_mask = UARTTIO_UART_INT_RX;
+}
+
+/*
+ * ubi32_uarttio_enable_ms
+ * Set the modem control timer to fire immediately.
+ */
+static void ubi32_uarttio_enable_ms(struct uart_port *port)
+{
+ /* N/A */
+}
+
+/*
+ * ubi32_uarttio_isr
+ */
+static irqreturn_t ubi32_uarttio_isr(int irq, void *appdata)
+{
+ struct ubi32_uarttio_port *uup = uarttio_ports;
+ int i;
+
+ /*
+ * Service all of the ports
+ */
+ for (i = 0; i < uarttio_nports; i++) {
+ unsigned int flags;
+
+ if (!(uup->uart->flags & UARTTIO_UART_FLAG_ENABLED)) {
+ uup++;
+ continue;
+ }
+
+ spin_lock(&uup->port.lock);
+
+ flags = uup->uart->int_flags;
+
+ uup->uart->int_flags = 0;
+
+ ubi32_uarttio_handle_receive(uup, flags);
+ ubi32_uarttio_handle_transmit(uup, flags);
+
+ tty_flip_buffer_push(uup->port.info->port.tty);
+
+ spin_unlock(&uup->port.lock);
+
+ uup++;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ubi32_uarttio_tx_empty
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int ubi32_uarttio_tx_empty(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+
+ if (uup->uart->tx_fifo_head == uup->uart->tx_fifo_tail) {
+ return TIOCSER_TEMT;
+ }
+
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_get_mctrl
+ */
+static unsigned int ubi32_uarttio_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+/*
+ * ubi32_uarttio_set_mctrl
+ */
+static void ubi32_uarttio_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* N/A */
+}
+
+/*
+ * ubi32_uarttio_break_ctl
+ */
+static void ubi32_uarttio_break_ctl(struct uart_port *port, int break_state)
+{
+ /* N/A */
+}
+
+/*
+ * ubi32_uarttio_startup
+ */
+static int ubi32_uarttio_startup(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+ struct uarttio_uart *uart = uup->uart;
+
+ uart->flags |= UARTTIO_UART_FLAG_ENABLED;
+
+ uart->int_mask |= UARTTIO_UART_INT_TXBE | UARTTIO_UART_INT_RX;
+
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_shutdown
+ */
+static void ubi32_uarttio_shutdown(struct uart_port *port)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+ struct uarttio_uart *uart = uup->uart;
+
+ uart->int_mask = 0;
+ uart->flags &= ~UARTTIO_UART_FLAG_ENABLED;
+}
+
+/*
+ * ubi32_uarttio_set_termios
+ */
+static void ubi32_uarttio_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+ unsigned long flags;
+ unsigned int baud;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+#if 0
+ port->read_status_mask = UBI32_UARTTIO_RX | UBI32_UARTTIO_RXOVF | UBI32_UARTTIO_TXOVF;
+
+ if (termios->c_iflag & INPCK) {
+ port->read_status_mask |= UBI32_UARTTIO_RXFRAME;
+ }
+#endif
+
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR) {
+ port->ignore_status_mask |= UARTTIO_UART_INT_RXFRAME |
+ UARTTIO_UART_INT_RXOVF;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0) {
+ port->ignore_status_mask |= UARTTIO_UART_INT_RX |
+ UARTTIO_UART_INT_RXFRAME |
+ UARTTIO_UART_INT_RXOVF;
+ }
+
+ /* update timeout */
+ baud = uart_get_baud_rate(port, termios, old, 0, 460800);
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ ubi32_uarttio_set_baud(uup, baud);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * ubi32_uarttio_type
+ */
+static const char *ubi32_uarttio_type(struct uart_port *port)
+{
+ return (port->type == PORT_UBI32_UARTTIO) ? "UBI32_UARTTIO" : NULL;
+}
+
+/*
+ * ubi32_uarttio_release_port
+ * Release the memory region(s) being used by 'port'.
+ */
+static void ubi32_uarttio_release_port(struct uart_port *port)
+{
+}
+
+/*
+ * ubi32_uarttio_request_port
+ * Request the memory region(s) being used by 'port'.
+ */
+static int ubi32_uarttio_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_config_port
+ * Configure/autoconfigure the port.
+ */
+static void ubi32_uarttio_config_port(struct uart_port *port, int flags)
+{
+ if ((flags & UART_CONFIG_TYPE) && (ubi32_uarttio_request_port(port) == 0)) {
+ port->type = PORT_UBI32_UARTTIO;
+ }
+}
+
+/*
+ * ubi32_uarttio_verify_port
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ *
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_UBI32_UARTTIO and PORT_UNKNOWN
+ */
+static int ubi32_uarttio_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return 0;
+}
+
+static struct uart_ops ubi32_uarttio_pops = {
+ .tx_empty = ubi32_uarttio_tx_empty,
+ .set_mctrl = ubi32_uarttio_set_mctrl,
+ .get_mctrl = ubi32_uarttio_get_mctrl,
+ .stop_tx = ubi32_uarttio_stop_tx,
+ .start_tx = ubi32_uarttio_start_tx,
+ .stop_rx = ubi32_uarttio_stop_rx,
+ .enable_ms = ubi32_uarttio_enable_ms,
+ .break_ctl = ubi32_uarttio_break_ctl,
+ .startup = ubi32_uarttio_startup,
+ .shutdown = ubi32_uarttio_shutdown,
+ .set_termios = ubi32_uarttio_set_termios,
+ .type = ubi32_uarttio_type,
+ .release_port = ubi32_uarttio_release_port,
+ .request_port = ubi32_uarttio_request_port,
+ .config_port = ubi32_uarttio_config_port,
+ .verify_port = ubi32_uarttio_verify_port,
+};
+
+/*
+ * ubi32_uarttio_add_ports
+ */
+static int __init ubi32_uarttio_add_ports(void)
+{
+ int res = 0;
+ struct ubi32_uarttio_port *uup = uarttio_ports;
+ int i = 0;
+
+ for (i = 0; i < uarttio_nports; i++) {
+ /*
+ * Setup the GPIOs
+ */
+ res = gpio_request(uup->tx_pin, "ubi32_uarttio_tx");
+ if (res) {
+ printk(KERN_WARNING "Failed to request GPIO %d\n", uup->tx_pin);
+ res = -EBUSY;
+ goto next;
+ }
+
+ res = gpio_request(uup->rx_pin, "ubi32_uarttio_rx");
+ if (res) {
+ gpio_free(uup->tx_pin);
+ printk(KERN_WARNING "Failed to request GPIO %d\n", uup->rx_pin);
+ res = -EBUSY;
+ goto next;
+ }
+
+ res = uart_add_one_port(&ubi32_uarttio_uart_driver, &uup->port);
+ if (res) {
+ gpio_free(uup->rx_pin);
+ gpio_free(uup->tx_pin);
+ res = -ENODEV;
+ printk(KERN_WARNING "Failed to add port %d,%d\n", uup->tx_pin, uup->rx_pin);
+ goto next;
+ }
+ uup->added = 1;
+
+ /*
+ * Set the direction of the ports now, after we're sure that everything is ok
+ */
+ if (!uup->port_init) {
+ gpio_direction_output(uup->tx_pin, 1);
+ gpio_direction_input(uup->rx_pin);
+ }
+
+next:
+ uup++;
+ }
+ return res;
+}
+
+/*
+ * ubi32_uarttio_cleanup
+ */
+static void ubi32_uarttio_cleanup(void)
+{
+ struct ubi32_uarttio_port *uup;
+ int i;
+
+ /*
+ * Stop the hardware thread
+ */
+ if (uarttio_inst.regs) {
+ thread_disable(uarttio_inst.regs->thread);
+ }
+ if (uarttio_inst.irq_requested) {
+ free_irq(uarttio_inst.irq, NULL);
+ }
+
+ /*
+ * Get rid of the ports
+ */
+ uup = uarttio_inst.ports;
+ for (i = 0; i < uarttio_nports; i++) {
+ gpio_free(uup->tx_pin);
+ gpio_free(uup->rx_pin);
+ if (uup->added) {
+ uart_remove_one_port(&ubi32_uarttio_uart_driver, &uup->port);
+ }
+ uup++;
+ }
+
+ if (uarttio_inst.driver_registered) {
+ uart_unregister_driver(&ubi32_uarttio_uart_driver);
+ }
+}
+
+/*
+ * ubi32_uarttio_setup_port
+ * Setup a port in the TIO registers
+ */
+static int ubi32_uarttio_setup_port(int index,
+ struct uarttio_uart *uart,
+ unsigned int baud, unsigned int tx_pin,
+ unsigned int rx_pin)
+{
+ struct ubi32_uarttio_port *uup = &uarttio_ports[index];
+ void *tx_port = ubi_gpio_get_port(tx_pin);
+ void *rx_port = ubi_gpio_get_port(rx_pin);
+
+ /*
+ * Verify the ports are on chip
+ */
+ if (!tx_port || !rx_port) {
+ printk(KERN_WARNING "Invalid port(s) specified: %u or %u\n", tx_pin, rx_pin);
+ return -EINVAL;
+ }
+
+ uup->tx_pin = tx_pin;
+ uup->rx_pin = rx_pin;
+ uup->uart = uart;
+
+ /*
+ * Setup the port structure
+ */
+ uup->port.ops = &ubi32_uarttio_pops;
+ uup->port.line = index;
+ uup->port.iotype = UPIO_MEM;
+ uup->port.flags = UPF_BOOT_AUTOCONF;
+ uup->port.fifosize = uup->uart->tx_fifo_size;
+ uup->port.private_data = uup;
+
+ /*
+ * We share this IRQ across all ports
+ */
+ uup->port.irq = uarttio_inst.irq;
+
+ /*
+ * We really don't have a mem/map base but without these variables
+ * set, the serial_core won't startup.
+ */
+ uup->port.membase = (void __iomem *)uup;
+ uup->port.mapbase = (resource_size_t)uup;
+ spin_lock_init(&uup->port.lock);
+
+ /*
+ * Set up the hardware
+ */
+ uart->flags = UARTTIO_UART_FLAG_SET_RATE | UARTTIO_UART_FLAG_RESET;
+
+ uart->tx_port = (unsigned int)tx_port;
+ uart->tx_pin = gpio_pin_index(tx_pin);
+ uart->tx_bits = 8;
+ uart->tx_stop_bits = 1;
+
+ uart->rx_port = (unsigned int)rx_port;
+ uart->rx_pin = gpio_pin_index(rx_pin);
+ uart->rx_bits = 8;
+ uart->rx_stop_bits = 1;
+
+ uart->baud_rate = baud;
+
+ return 0;
+}
+
+enum ubi32_uarttio_parse_states {
+ UBI32_UARTTIO_PARSE_STATE_BAUD,
+ UBI32_UARTTIO_PARSE_STATE_TX_PIN,
+ UBI32_UARTTIO_PARSE_STATE_RX_PIN,
+ UBI32_UARTTIO_PARSE_STATE_HS,
+ UBI32_UARTTIO_PARSE_STATE_CTS_PIN,
+ UBI32_UARTTIO_PARSE_STATE_RTS_PIN,
+};
+
+/*
+ * ubi32_uarttio_parse_param
+ */
+static int ubi32_uarttio_parse_param(char *str)
+{
+ int res;
+ int i;
+ int baud = 0;
+ int tx_pin = 0;
+ int rx_pin = 0;
+ int hs = 0;
+ int cts_pin = 0;
+ int rts_pin = 0;
+ int nfound = 0;
+ enum ubi32_uarttio_parse_states state = UBI32_UARTTIO_PARSE_STATE_BAUD;
+ struct uarttio_uart *uart = uarttio_inst.regs->uarts;
+
+ /*
+ * Run though the options and generate the proper structures
+ */
+ res = get_option(&str, &i);
+ while ((res == 2) || (res == 1)) {
+ switch (state) {
+ case UBI32_UARTTIO_PARSE_STATE_BAUD:
+ /*
+ * If we are here and nfound > 0 then create the port
+ * based on the previous input
+ */
+ if (nfound) {
+ /*
+ * Create the port
+ */
+ if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
+ /*
+ * Port was invalid
+ */
+ goto fail;
+ } else {
+ printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
+ uart++;
+ }
+ }
+
+ /*
+ * Reset the variables and go to the next state
+ */
+ hs = 0;
+ baud = i;
+ state = UBI32_UARTTIO_PARSE_STATE_TX_PIN;
+ break;
+
+ case UBI32_UARTTIO_PARSE_STATE_TX_PIN:
+ tx_pin = i;
+ state = UBI32_UARTTIO_PARSE_STATE_RX_PIN;
+ break;
+
+ case UBI32_UARTTIO_PARSE_STATE_RX_PIN:
+ rx_pin = i;
+ state = UBI32_UARTTIO_PARSE_STATE_HS;
+ break;
+
+ case UBI32_UARTTIO_PARSE_STATE_HS:
+ hs = i;
+ if (hs) {
+ state = UBI32_UARTTIO_PARSE_STATE_CTS_PIN;
+ break;
+ }
+
+ if (nfound == uarttio_inst.regs->max_uarts) {
+ printk(KERN_WARNING "Maximum number of serial ports reached\n");
+ goto done;
+ }
+ nfound++;
+ state = UBI32_UARTTIO_PARSE_STATE_BAUD;
+ break;
+
+ case UBI32_UARTTIO_PARSE_STATE_CTS_PIN:
+ cts_pin = i;
+ state = UBI32_UARTTIO_PARSE_STATE_RTS_PIN;
+ break;
+
+ case UBI32_UARTTIO_PARSE_STATE_RTS_PIN:
+ rts_pin = i;
+
+ if (nfound == uarttio_inst.regs->max_uarts) {
+ printk(KERN_WARNING "Maximum number of serial ports reached\n");
+ goto done;
+ }
+ nfound++;
+ state = UBI32_UARTTIO_PARSE_STATE_BAUD;
+ break;
+ }
+ res = get_option(&str, &i);
+ }
+
+ if ((res > 2) || state != UBI32_UARTTIO_PARSE_STATE_BAUD) {
+ printk(KERN_WARNING "Parameter syntax error.\n");
+ res = -EINVAL;
+ goto fail;
+ }
+
+ /*
+ * Create the final port
+ */
+ if (ubi32_uarttio_setup_port(nfound - 1, uart, baud, tx_pin, rx_pin)) {
+ goto fail;
+ }
+ printk(KERN_INFO "Serial port %d: tx=%d:rx=%d @ %d\n", nfound, tx_pin, rx_pin, baud);
+
+done:
+ uarttio_nports = nfound;
+
+ return nfound ? 0 : -ENODEV;
+
+fail:
+ /*
+ * Reset the ports
+ */
+ uart = uarttio_inst.regs->uarts;
+ for (i = 0; i < uarttio_inst.regs->max_uarts; i++) {
+ uart->flags = 0;
+ uart++;
+ }
+
+ return res;
+}
+
+/*
+ * ubi32_uarttio_probe
+ */
+static int ubi32_uarttio_probe(void)
+{
+ int ret;
+ struct uarttio_node *uart_node;
+ char *str = utio_ports_param;
+ static int probed;
+
+ /*
+ * We only want to be probed once, we could be probed twice
+ * for example if we are used as a console
+ */
+ if (probed) {
+ return 0;
+ }
+ probed = 1;
+
+ /*
+ * Extract the TIO name from the setup string
+ */
+ while (*str) {
+ if (*str == ',') {
+ *str++ = 0;
+ break;
+ }
+ str++;
+ }
+
+ if (!*str) {
+ return -EINVAL;
+ }
+
+ uart_node = (struct uarttio_node *)devtree_find_node(utio_ports_param);
+ if (!uart_node) {
+ return -ENODEV;
+ }
+
+ uarttio_inst.irq = uart_node->dn.recvirq;
+ uarttio_inst.regs = uart_node->regs;
+
+ /*
+ * Parse module parameters.
+ */
+ ret = ubi32_uarttio_parse_param(str);
+ if (ret != 0) {
+ goto fail;
+ }
+
+ ubi32_uarttio_uart_driver.nr = uarttio_nports;
+
+ return 0;
+
+fail:
+ ubi32_uarttio_cleanup();
+ return ret;
+}
+
+#if defined(CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE)
+/*
+ * ubi32_uarttio_console_setup
+ */
+static int __init ubi32_uarttio_console_setup(struct console *co, char *options)
+{
+ int baud;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ struct ubi32_uarttio_port *uup;
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= uarttio_nports) {
+ co->index = 0;
+ }
+ uup = &uarttio_ports[co->index];
+ baud = uup->uart->baud_rate;
+ uup->uart->flags |= UARTTIO_UART_FLAG_ENABLED;
+
+ /*
+ * Setup the GPIOs
+ * We have to use the direct interface because the gpio
+ * subsystem is not available at this point.
+ */
+ uup->port_init = 1;
+ UBICOM32_GPIO_SET_PIN_HIGH(uup->tx_pin);
+ UBICOM32_GPIO_SET_PIN_OUTPUT(uup->tx_pin);
+ UBICOM32_GPIO_SET_PIN_INPUT(uup->rx_pin);
+
+ /*
+ * Start the thread
+ */
+ thread_enable(uarttio_inst.regs->thread);
+
+ /*
+ * Process options
+ */
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ if (ubi32_uarttio_set_baud(uup, baud)) {
+ baud = uup->uart->current_baud_rate;
+ }
+ }
+
+ return uart_set_options(&uup->port, co, baud, 'n', 8, 'n');
+}
+
+/*
+ * ubi32_uarttio_console_putchar
+ */
+static void ubi32_uarttio_console_putchar(struct uart_port *port, int ch)
+{
+ struct ubi32_uarttio_port *uup = port->private_data;
+
+ while (ubi32_uarttio_put_char(uup->uart, ch)) {
+ cpu_relax();
+ }
+}
+
+/*
+ * ubi32_uarttio_console_write
+ * Interrupts are disabled on entering
+ */
+static void ubi32_uarttio_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &(uarttio_ports[co->index].port);
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_console_write(port, s, count, ubi32_uarttio_console_putchar);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct console ubi32_uarttio_console = {
+ .name = UBI32_UARTTIO_NAME,
+ .write = ubi32_uarttio_console_write,
+ .device = uart_console_device,
+ .setup = ubi32_uarttio_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ubi32_uarttio_uart_driver,
+};
+
+static int __init ubi32_uarttio_console_init(void)
+{
+ int res;
+
+ res = ubi32_uarttio_probe();
+ if (res) {
+ return res;
+ }
+
+ register_console(&ubi32_uarttio_console);
+ return 0;
+}
+console_initcall(ubi32_uarttio_console_init);
+#endif /* CONFIG_SERIAL_UBI32_UARTTIO_CONSOLE */
+
+/*
+ * ubi32_serial_suspend
+ */
+static int ubi32_uarttio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int i;
+ for (i = 0; i < uarttio_nports; i++) {
+ uart_suspend_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
+ }
+
+ return 0;
+}
+
+/*
+ * ubi32_serial_resume
+ */
+static int ubi32_uarttio_resume(struct platform_device *pdev)
+{
+ int i;
+ for (i = 0; i < uarttio_nports; i++) {
+ uart_resume_port(&ubi32_uarttio_uart_driver, &uarttio_ports[i].port);
+ }
+
+ return 0;
+}
+
+/*
+ * ubi32_uarttio_remove
+ */
+static int __devexit ubi32_uarttio_remove(struct platform_device *pdev)
+{
+ ubi32_uarttio_cleanup();
+
+ uart_unregister_driver(&ubi32_uarttio_uart_driver);
+
+ return 0;
+}
+
+static struct platform_driver ubi32_uarttio_platform_driver = {
+ .remove = __devexit_p(ubi32_uarttio_remove),
+ .suspend = ubi32_uarttio_suspend,
+ .resume = ubi32_uarttio_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifndef MODULE
+/*
+ * Called at boot time.
+ *
+ * uarttio=TIONAME,(baud,tx_pin,rx_pin,handshake[,cts_pin,rts_pin],...)
+ * TIONAME is the name of the devtree node which describes the UARTTIO
+ * pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]
+ * handshake = 1 to enable handshaking, provide cts_pin, rts_pin (UNSUPPORTED)
+ * handshake = 0 to disable handshaking, do not provide cts_pin, rts_pin
+ * Ex: uarttio=UARTTIO,57600,7,6,0,9600,8,9,0
+ */
+static int __init ubi32_uarttio_setup(char *str)
+{
+ strncpy(utio_ports_param, str, UBI32_UARTTIO_MAX_PARAM_LEN);
+ utio_ports_param[UBI32_UARTTIO_MAX_PARAM_LEN - 1] = 0;
+ return 1;
+}
+__setup("uarttio=", ubi32_uarttio_setup);
+#endif
+
+/*
+ * ubi32_uarttio_init
+ */
+static int __init ubi32_uarttio_init(void)
+{
+ int ret;
+ int i;
+
+ ret = ubi32_uarttio_probe();
+ if (ret) {
+ return ret;
+ }
+
+ /*
+ * Request the IRQ (do it here since many ports share the same IRQ)
+ */
+ ret = request_irq(uarttio_inst.irq, ubi32_uarttio_isr, IRQF_DISABLED, DRIVER_NAME, NULL);
+ if (ret != 0) {
+ printk(KERN_WARNING "Could not request IRQ %d\n", uarttio_inst.irq);
+ goto fail;
+ }
+ uarttio_inst.irq_requested = 1;
+
+ /*
+ * Register the UART driver and add the ports
+ */
+ ret = uart_register_driver(&ubi32_uarttio_uart_driver);
+ if (ret != 0) {
+ goto fail;
+ }
+ uarttio_inst.driver_registered = 1;
+
+ ret = ubi32_uarttio_add_ports();
+ if (ret != 0) {
+ ubi32_uarttio_cleanup();
+ return ret;
+ }
+
+ /*
+ * Start the thread
+ */
+ thread_enable(uarttio_inst.regs->thread);
+
+ for (i = 0; i < uarttio_nports; i++) {
+ pr_info("Serial: Ubicom32 uarttio #%d: tx:%d rx:%d baud:%d\n",
+ i, uarttio_ports[i].tx_pin, uarttio_ports[i].rx_pin,
+ uarttio_ports[i].uart->current_baud_rate);
+ }
+ pr_info("Serial: Ubicom32 uarttio started on thread:%d irq:%d\n", uarttio_inst.regs->thread, uarttio_inst.irq);
+
+ return ret;
+
+fail:
+ ubi32_uarttio_cleanup();
+ return ret;
+}
+module_init(ubi32_uarttio_init);
+
+/*
+ * ubi32_uarttio_exit
+ */
+static void __exit ubi32_uarttio_exit(void)
+{
+ platform_driver_unregister(&ubi32_uarttio_platform_driver);
+}
+module_exit(ubi32_uarttio_exit);
+
+module_param_string(ports, utio_ports_param, sizeof(utio_ports_param), 0444);
+MODULE_PARM_DESC(ports, "Sets the ports to allocate: ports=TIONAME,(baud,txpin,rxpin,handshake[,ctspin,rtspin],...)\n"
+ " TIONAME is the name of the devtree node which describes the UARTTIO\n"
+ " pin is the index of the pin, i.e. PA4 is 5 [(port * 32) + pin]\n"
+ " handshake = 1 to enable handshaking, provide ctspin, rtspin (UNSUPPORTED)\n"
+ " handshake = 0 to disable handshaking, do not provide ctspin, rtspin\n"
+ " Ex: ports=UARTTIO,57600,7,6,0,9600,8,9,0\n");
+MODULE_AUTHOR("Patrick Tjin <pat.tjin@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom serial virtual peripherial driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(UBI32_UARTTIO_MAJOR);
+MODULE_ALIAS("platform:" DRIVER_NAME);
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -196,6 +196,15 @@ config SPI_S3C24XX
help
SPI driver for Samsung S3C24XX series ARM SoCs
+config SPI_UBICOM32_GPIO
+ tristate "Ubicom32 SPI over GPIO"
+ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
+ select SPI_BITBANG
+ select HAS_DMA
+ help
+ SPI driver for the Ubicom32 architecture using
+ GPIO lines to provide the SPI bus.
+
config SPI_S3C24XX_GPIO
tristate "Samsung S3C24XX series SPI by GPIO"
depends on ARCH_S3C2410 && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
--- /dev/null
+++ b/drivers/spi/spi_ubicom32_gpio.c
@@ -0,0 +1,268 @@
+/*
+ * drivers/spi_spi_ubicom32_gpio.c
+ * Ubicom32 GPIO based SPI driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/gpio.h>
+
+#include <asm/ip5000.h>
+#include <asm/ubicom32-spi-gpio.h>
+
+#define DRIVER_NAME "ubicom32-spi-gpio"
+
+struct ubicom32_spi_gpio {
+ struct spi_bitbang bitbang;
+
+ struct ubicom32_spi_gpio_platform_data *pdata;
+
+ struct platform_device *dev;
+};
+
+/*
+ * The following 4 functions are used by EXPAND_BITBANG_TXRX to bitbang the data out.
+ */
+static inline void setsck(struct spi_device *dev, int on)
+{
+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
+ gpio_set_value(usg->pdata->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
+ gpio_set_value(usg->pdata->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+ struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
+ return gpio_get_value(usg->pdata->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+/*
+ * ubicom32_spi_gpio_txrx_mode0
+ */
+static u32 ubicom32_spi_gpio_txrx_mode0(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+/*
+ * ubicom32_spi_gpio_txrx_mode1
+ */
+static u32 ubicom32_spi_gpio_txrx_mode1(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+/*
+ * ubicom32_spi_gpio_txrx_mode2
+ */
+static u32 ubicom32_spi_gpio_txrx_mode2(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+/*
+ * ubicom32_spi_gpio_txrx_mode3
+ */
+static u32 ubicom32_spi_gpio_txrx_mode3(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+/*
+ * ubicom32_spi_gpio_chipselect
+ */
+static void ubicom32_spi_gpio_chipselect(struct spi_device *dev, int value)
+{
+ struct ubicom32_spi_gpio_controller_data *cd = (struct ubicom32_spi_gpio_controller_data *)dev->controller_data;
+ unsigned int cs_polarity = dev->mode & SPI_CS_HIGH ? 1 : 0;
+
+ if (value == BITBANG_CS_ACTIVE) {
+ gpio_set_value(cd->pin_cs, cs_polarity);
+ return;
+ }
+ gpio_set_value(cd->pin_cs, !cs_polarity);
+}
+
+/*
+ * ubicom32_spi_gpio_probe
+ */
+static int ubicom32_spi_gpio_probe(struct platform_device *dev)
+{
+ struct ubicom32_spi_gpio_platform_data *pdata;
+ struct spi_master *master;
+ struct ubicom32_spi_gpio *usg;
+ int ret;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct ubicom32_spi_gpio));
+ if (master == NULL) {
+ dev_err(&dev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(master);
+
+ platform_set_drvdata(dev, usg);
+
+ /*
+ * Copy in the platform data
+ */
+ pdata = dev->dev.platform_data;
+ usg->pdata = dev->dev.platform_data;
+
+ /*
+ * Request the GPIO lines
+ */
+ ret = gpio_request(pdata->pin_mosi, "spi-mosi");
+ if (ret) {
+ dev_err(&dev->dev, "Failed to allocate spi-mosi GPIO\n");
+ goto err;
+ }
+
+ ret = gpio_request(pdata->pin_miso, "spi-miso");
+ if (ret) {
+ dev_err(&dev->dev, "Failed to allocate spi-miso GPIO\n");
+ goto err_nomiso;
+ }
+
+ ret = gpio_request(pdata->pin_clk, "spi-clk");
+ if (ret) {
+ dev_err(&dev->dev, "Failed to allocate spi-clk GPIO\n");
+ goto err_noclk;
+ }
+
+ /*
+ * Setup spi-bitbang adaptor
+ */
+ usg->bitbang.flags |= SPI_CS_HIGH;
+ usg->bitbang.master = spi_master_get(master);
+ usg->bitbang.master->bus_num = pdata->bus_num;
+ usg->bitbang.master->num_chipselect = pdata->num_chipselect;
+ usg->bitbang.chipselect = ubicom32_spi_gpio_chipselect;
+
+ usg->bitbang.txrx_word[SPI_MODE_0] = ubicom32_spi_gpio_txrx_mode0;
+ usg->bitbang.txrx_word[SPI_MODE_1] = ubicom32_spi_gpio_txrx_mode1;
+ usg->bitbang.txrx_word[SPI_MODE_2] = ubicom32_spi_gpio_txrx_mode2;
+ usg->bitbang.txrx_word[SPI_MODE_3] = ubicom32_spi_gpio_txrx_mode3;
+
+ /*
+ * Setup the GPIO pins
+ */
+ gpio_direction_output(pdata->pin_clk, pdata->clk_default);
+ gpio_direction_output(pdata->pin_mosi, 0);
+ gpio_direction_input(pdata->pin_miso);
+
+ /*
+ * Ready to go
+ */
+ ret = spi_bitbang_start(&usg->bitbang);
+ if (ret) {
+ goto err_no_bitbang;
+ }
+
+ return 0;
+
+err_no_bitbang:
+ spi_master_put(usg->bitbang.master);
+
+ gpio_free(pdata->pin_clk);
+
+err_noclk:
+ gpio_free(pdata->pin_miso);
+
+err_nomiso:
+ gpio_free(pdata->pin_mosi);
+
+err:
+ return ret;
+}
+
+/*
+ * ubicom32_spi_gpio_remove
+ */
+static int ubicom32_spi_gpio_remove(struct platform_device *dev)
+{
+ struct ubicom32_spi_gpio *sp = platform_get_drvdata(dev);
+
+ spi_bitbang_stop(&sp->bitbang);
+ spi_master_put(sp->bitbang.master);
+
+ return 0;
+}
+
+/*
+ * Work with hotplug and coldplug
+ */
+MODULE_ALIAS("platform:ubicom32_spi_gpio");
+
+static struct platform_driver ubicom32_spi_gpio_drv = {
+ .probe = ubicom32_spi_gpio_probe,
+ .remove = ubicom32_spi_gpio_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * ubicom32_spi_gpio_init
+ */
+static int __init ubicom32_spi_gpio_init(void)
+{
+ return platform_driver_register(&ubicom32_spi_gpio_drv);
+}
+
+/*
+ * ubicom32_spi_gpio_exit
+ */
+static void __exit ubicom32_spi_gpio_exit(void)
+{
+ platform_driver_unregister(&ubicom32_spi_gpio_drv);
+}
+
+module_init(ubicom32_spi_gpio_init);
+module_exit(ubicom32_spi_gpio_exit);
+
+MODULE_DESCRIPTION("Ubicom32 SPI-GPIO Driver");
+MODULE_AUTHOR("Pat Tjin, <@ubicom.com>");
+MODULE_LICENSE("GPL");
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -71,4 +71,12 @@ config UIO_SERCOS3
If you compile this as a module, it will be called uio_sercos3.
+config UIO_UBICOM32RING
+ tristate "Ubicom32 Ring Buffer driver"
+ default n
+ help
+ Userspace I/O interface for a Ubicom32 Ring Buffer.
+
+ If you compile this as a module, it will be called uio_ubicom32ring
+
endif
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
obj-$(CONFIG_UIO_SMX) += uio_smx.o
obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
+obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
--- /dev/null
+++ b/drivers/uio/uio_ubicom32ring.c
@@ -0,0 +1,289 @@
+/*
+ * drivers/uio/uio_ubicom32ring.c
+ *
+ * Userspace I/O platform driver for Ubicom32 ring buffers
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * Based on uio_ubicom32ring.c by Magnus Damm
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#include <asm/ip5000.h>
+#include <asm/ubicom32ring.h>
+
+#define DRIVER_NAME "uio_ubicom32ring"
+
+struct uio_ubicom32ring_data {
+ struct uio_info *uioinfo;
+
+ struct uio_ubicom32ring_regs *regs;
+
+ /*
+ * IRQ used to kick the ring buffer
+ */
+ int irq_tx;
+ int irq_rx;
+
+ spinlock_t lock;
+
+ unsigned long flags;
+
+ char name[0];
+};
+
+static irqreturn_t uio_ubicom32ring_handler(int irq, struct uio_info *dev_info)
+{
+ struct uio_ubicom32ring_data *priv = dev_info->priv;
+
+ /* Just disable the interrupt in the interrupt controller, and
+ * remember the state so we can allow user space to enable it later.
+ */
+
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+static int uio_ubicom32ring_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+ struct uio_ubicom32ring_data *priv = dev_info->priv;
+ unsigned long flags;
+
+ /* Allow user space to enable and disable the interrupt
+ * in the interrupt controller, but keep track of the
+ * state to prevent per-irq depth damage.
+ *
+ * Serialize this operation to support multiple tasks.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (irq_on & 2) {
+ /*
+ * Kick the ring buffer (if we can)
+ */
+ if (priv->irq_tx != 0xFF) {
+ ubicom32_set_interrupt(priv->irq_tx);
+ }
+ }
+
+ if (priv->irq_rx != 0xFF) {
+ if (irq_on & 1) {
+ if (test_and_clear_bit(0, &priv->flags))
+ enable_irq(dev_info->irq);
+ } else {
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq(dev_info->irq);
+ }
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int uio_ubicom32ring_probe(struct platform_device *pdev)
+{
+ struct uio_info *uioinfo;
+ struct uio_mem *uiomem;
+ struct uio_ubicom32ring_data *priv;
+ struct uio_ubicom32ring_regs *regs;
+ struct resource *mem_resource;
+ struct resource *irqtx_resource;
+ struct resource *irqrx_resource;
+ int ret = -EINVAL;
+ int i;
+
+ uioinfo = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+ if (!uioinfo) {
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate private data with some string space after
+ */
+ i = sizeof(DRIVER_NAME) + 1;
+ i += pdev->dev.platform_data ? strlen(pdev->dev.platform_data) : 0;
+ priv = kzalloc(sizeof(struct uio_ubicom32ring_data) + i, GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ kfree(uioinfo);
+ return -ENOMEM;
+ }
+
+ strcpy(priv->name, DRIVER_NAME ":");
+ if (pdev->dev.platform_data) {
+ strcat(priv->name, pdev->dev.platform_data);
+ }
+ uioinfo->priv = priv;
+ uioinfo->name = priv->name;
+ uioinfo->version = "0.1";
+
+ priv->uioinfo = uioinfo;
+ spin_lock_init(&priv->lock);
+ priv->flags = 0; /* interrupt is enabled to begin with */
+
+ /*
+ * Get our resources, the IRQ_TX and IRQ_RX are optional.
+ */
+ priv->irq_tx = 0xFF;
+ irqtx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irqtx_resource) {
+ priv->irq_tx = irqtx_resource->start;
+ }
+
+ uioinfo->irq = -1;
+ priv->irq_rx = 0xFF;
+ irqrx_resource = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+ if (irqrx_resource) {
+ priv->irq_rx = irqrx_resource->start;
+ uioinfo->irq = priv->irq_rx;
+ uioinfo->handler = uio_ubicom32ring_handler;
+ }
+
+ mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_resource || !mem_resource->start) {
+ dev_err(&pdev->dev, "No valid memory resource found\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+ regs = (struct uio_ubicom32ring_regs *)mem_resource->start;
+ priv->regs = regs;
+
+ if (regs->version != UIO_UBICOM32RING_REG_VERSION) {
+ dev_err(&pdev->dev, "version %d not supported\n", regs->version);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /*
+ * First range is the shared register space, if we have any
+ */
+ uiomem = &uioinfo->mem[0];
+ if (regs->regs_size) {
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = (u32_t)regs->regs;
+ uiomem->size = regs->regs_size;
+ ++uiomem;
+ dev_info(&pdev->dev, "regs:%p (%u) / rings: %d found\n", regs->regs, regs->regs_size, regs->num_rings);
+ } else {
+ dev_info(&pdev->dev, "rings: %d found\n", regs->num_rings);
+ }
+
+ /*
+ * The rest of the range correspond to the rings
+ */
+ for (i = 0; i < regs->num_rings; i++) {
+ dev_info(&pdev->dev, "\t%d: entries:%d ring:%p\n",
+ i, regs->rings[i]->entries, &(regs->rings[i]->ring));
+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " I/O memory resources.\n");
+ break;
+ }
+
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = (u32_t)&(regs->rings[i]->head);
+ uiomem->size = (regs->rings[i]->entries * sizeof(u32_t)) +
+ sizeof(struct uio_ubicom32ring_desc);
+ ++uiomem;
+ }
+
+ while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+ uiomem->size = 0;
+ ++uiomem;
+ }
+
+ /* This driver requires no hardware specific kernel code to handle
+ * interrupts. Instead, the interrupt handler simply disables the
+ * interrupt in the interrupt controller. User space is responsible
+ * for performing hardware specific acknowledge and re-enabling of
+ * the interrupt in the interrupt controller.
+ *
+ * Interrupt sharing is not supported.
+ */
+ uioinfo->irq_flags = IRQF_DISABLED;
+ uioinfo->irqcontrol = uio_ubicom32ring_irqcontrol;
+
+ ret = uio_register_device(&pdev->dev, priv->uioinfo);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register uio device\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(&pdev->dev, "'%s' using irq: rx %d tx %d, regs %p\n",
+ priv->name, priv->irq_rx, priv->irq_tx, priv->regs);
+
+ return 0;
+
+fail:
+ kfree(uioinfo);
+ kfree(priv);
+ return ret;
+}
+
+static int uio_ubicom32ring_remove(struct platform_device *pdev)
+{
+ struct uio_ubicom32ring_data *priv = platform_get_drvdata(pdev);
+
+ uio_unregister_device(priv->uioinfo);
+ kfree(priv->uioinfo);
+ kfree(priv);
+ return 0;
+}
+
+static struct platform_driver uio_ubicom32ring = {
+ .probe = uio_ubicom32ring_probe,
+ .remove = uio_ubicom32ring_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init uio_ubicom32ring_init(void)
+{
+ return platform_driver_register(&uio_ubicom32ring);
+}
+
+static void __exit uio_ubicom32ring_exit(void)
+{
+ platform_driver_unregister(&uio_ubicom32ring);
+}
+
+module_init(uio_ubicom32ring_init);
+module_exit(uio_ubicom32ring_exit);
+
+MODULE_AUTHOR("Patrick Tjin");
+MODULE_DESCRIPTION("Userspace I/O driver for Ubicom32 ring buffers");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -154,6 +154,10 @@ ep_matches (
/* configure your hardware with enough buffering!! */
}
break;
+
+ case USB_ENDPOINT_XFER_BULK:
+ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
+ return 0;
}
/* MATCH!! */
@@ -174,7 +178,7 @@ ep_matches (
return 0;
desc->bEndpointAddress |= epnum;
}
-
+
/* report (variable) full speed bulk maxpacket */
if (USB_ENDPOINT_XFER_BULK == type) {
int size = ep->maxpacket;
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
default y if PCMCIA && !M32R # sl811_cs
default y if ARM # SL-811
default y if SUPERH # r8a66597-hcd
+ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
default PCI
# many non-PCI SOC chips embed OHCI
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,7 +11,7 @@ config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
- tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+ tristate 'Inventra Highspeed Dual Role Controller (TI, Ubicom, ...)'
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -22,6 +22,10 @@ ifeq ($(CONFIG_ARCH_OMAP3430),y)
musb_hdrc-objs += omap2430.o
endif
+ifeq ($(CONFIG_UBICOM32), y)
+ musb_hdrc-objs += ubi32_usb.o
+endif
+
ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
endif
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -105,6 +105,13 @@
#include <asm/mach-types.h>
#endif
+#ifdef CONFIG_UBICOM32
+#include <asm/ip5000.h>
+#include <asm/ubicom32-tio.h>
+extern void ubi32_usb_init(void);
+extern void ubi32_usb_int_clr(void);
+#endif
+
#include "musb_core.h"
@@ -147,7 +154,7 @@ static inline struct musb *dev_to_musb(s
}
/*-------------------------------------------------------------------------*/
-
+#ifndef CONFIG_UBICOM32
#ifndef CONFIG_USB_TUSB6010
/*
* Load an endpoint's FIFO
@@ -226,8 +233,38 @@ void musb_read_fifo(struct musb_hw_ep *h
readsb(fifo, dst, len);
}
}
+#endif /* T6010 */
+#else /* UBICOM */
+
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
+{
+ void __iomem *fifo = hw_ep->fifo;
+
+ prefetch((u8 *)pSource);
+
+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+ 'T', hw_ep->epnum, fifo, wCount, pSource);
+
+ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
+
+}
-#endif /* normal PIO */
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
+{
+
+ void __iomem *fifo = hw_ep->fifo;
+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+ 'R', hw_ep->epnum, fifo, wCount, pDest);
+ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
+}
+#endif /* CONFIG_UBICOM32 */
/*-------------------------------------------------------------------------*/
@@ -872,12 +909,19 @@ void musb_start(struct musb *musb)
musb_writeb(regs, MUSB_TESTMODE, 0);
/* put into basic highspeed mode and start session */
+#ifndef CONFIG_UBICOM32
musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
| MUSB_POWER_SOFTCONN
| MUSB_POWER_HSENAB
/* ENSUSPEND wedges tusb */
/* | MUSB_POWER_ENSUSPEND */
);
+#else
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+#endif
musb->is_active = 0;
devctl = musb_readb(regs, MUSB_DEVCTL);
@@ -1079,6 +1123,7 @@ static struct fifo_cfg __initdata mode_4
};
+#ifndef CONFIG_UBICOM32
/*
* configure a fifo; for non-shared endpoints, this may be called
* once for a tx fifo and once for an rx fifo.
@@ -1238,7 +1283,7 @@ static int __init ep_config_from_table(s
return 0;
}
-
+#endif /* CONFIG_UBICOM32 */
/*
* ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
@@ -1253,13 +1298,23 @@ static int __init ep_config_from_hw(stru
DBG(2, "<== static silicon ep config\n");
/* FIXME pick up ep0 maxpacket size */
+#ifdef CONFIG_UBICOM32
+ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
+ hw_ep = musb->endpoints;
+ hw_ep->is_shared_fifo = true;
+#endif
for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
musb_ep_select(mbase, epnum);
hw_ep = musb->endpoints + epnum;
/* read from core using indexed model */
+#ifndef CONFIG_UBICOM32
reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+#else
+ reg = musb_readb(musb->mregs, 0x10 + MUSB_FIFOSIZE);
+#endif
+
if (!reg) {
/* 0's returned when no more endpoints */
break;
@@ -1272,8 +1327,10 @@ static int __init ep_config_from_hw(stru
/* shared TX/RX FIFO? */
if ((reg & 0xf0) == 0xf0) {
hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
- hw_ep->is_shared_fifo = true;
- continue;
+ hw_ep->is_shared_fifo = true;
+#ifndef CONFIG_UBICOM32
+ continue; /* For ubicom processors, shared ep is all we get */
+#endif
} else {
hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
hw_ep->is_shared_fifo = false;
@@ -1290,17 +1347,30 @@ static int __init ep_config_from_hw(stru
/* REVISIT: this algorithm is lazy, we should at least
* try to pick a double buffered endpoint.
*/
+#ifndef CONFIG_UBICOM32
if (musb->bulk_ep)
continue;
musb->bulk_ep = hw_ep;
+#else
+ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
+ continue;
+ /* Save theEP with 1024 Bytes FIFO for ISO */
+ if(hw_ep->max_packet_sz_tx == 512) {
+ if (!musb->bulk_ep_in) {
+ musb->bulk_ep_in = hw_ep;
+ } else if (!musb->bulk_ep_out) {
+ musb->bulk_ep_out = hw_ep;
+ }
+ }
+#endif /* CONFIG_UBICOM32 */
#endif
}
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (!musb->bulk_ep) {
+ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
pr_debug("%s: missing bulk\n", musb_driver_name);
return -EINVAL;
- }
+ }
#endif
return 0;
@@ -1408,12 +1478,16 @@ static int __init musb_core_init(u16 mus
musb->epmask = 1;
if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+#ifndef CONFIG_UBICOM32
if (musb->config->dyn_fifo)
status = ep_config_from_table(musb);
- else {
+ else
+#endif
+ {
ERR("reconfigure software for Dynamic FIFOs\n");
status = -ENODEV;
}
+
} else {
if (!musb->config->dyn_fifo)
status = ep_config_from_hw(musb);
@@ -1477,8 +1551,8 @@ static int __init musb_core_init(u16 mus
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
+static u32_t musb_int_count = 0;
static irqreturn_t generic_interrupt(int irq, void *__hci)
{
unsigned long flags;
@@ -1487,10 +1561,17 @@ static irqreturn_t generic_interrupt(int
spin_lock_irqsave(&musb->lock, flags);
+#ifndef CONFIG_UBICOM32
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+#else
+ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
+ //ubi32_usb_int_clr();
+ musb_int_count++;
+#endif
+ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
if (musb->int_usb || musb->int_tx || musb->int_rx)
retval = musb_interrupt(musb);
@@ -2222,6 +2303,10 @@ static struct platform_driver musb_drive
static int __init musb_init(void)
{
+#ifdef CONFIG_UBICOM32
+ ubi32_usb_init();
+#endif
+
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (usb_disabled())
return 0;
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -326,7 +326,9 @@ struct musb {
* queue until it completes or NAKs too much; then we try the next
* endpoint.
*/
- struct musb_hw_ep *bulk_ep;
+ //struct musb_hw_ep *bulk_ep;
+ struct musb_hw_ep *bulk_ep_in; //ubicom
+ struct musb_hw_ep *bulk_ep_out;
struct list_head control; /* of musb_qh */
struct list_head in_bulk; /* of musb_qh */
@@ -467,7 +469,7 @@ extern void musb_platform_disable(struct
extern void musb_hnp_stop(struct musb *musb);
-extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
#if defined(CONFIG_USB_TUSB6010) || \
defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -421,7 +421,7 @@ void musb_g_tx(struct musb *musb, u8 epn
* probably rates reporting as a host error
*/
if (csr & MUSB_TXCSR_P_SENTSTALL) {
- csr |= MUSB_TXCSR_P_WZC_BITS;
+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
csr &= ~MUSB_TXCSR_P_SENTSTALL;
musb_writew(epio, MUSB_TXCSR, csr);
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
@@ -437,7 +437,7 @@ void musb_g_tx(struct musb *musb, u8 epn
if (csr & MUSB_TXCSR_P_UNDERRUN) {
/* we NAKed, no big deal ... little reason to care */
- csr |= MUSB_TXCSR_P_WZC_BITS;
+ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
csr &= ~(MUSB_TXCSR_P_UNDERRUN
| MUSB_TXCSR_TXPKTRDY);
musb_writew(epio, MUSB_TXCSR, csr);
@@ -573,10 +573,16 @@ static void rxstate(struct musb *musb, s
u16 csr = 0;
const u8 epnum = req->epnum;
struct usb_request *request = &req->request;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep = NULL;
void __iomem *epio = musb->endpoints[epnum].regs;
u16 fifo_count = 0;
- u16 len = musb_ep->packet_sz;
+ u16 len = 0;
+
+ if (musb->endpoints[epnum].is_shared_fifo)
+ musb_ep = &musb->endpoints[epnum].ep_in;
+ else
+ musb_ep = &musb->endpoints[epnum].ep_out;
+ len = musb_ep->packet_sz;
csr = musb_readw(epio, MUSB_RXCSR);
@@ -715,7 +721,7 @@ static void rxstate(struct musb *musb, s
*/
/* ack the read! */
- csr |= MUSB_RXCSR_P_WZC_BITS;
+ csr &= ~MUSB_RXCSR_P_WZC_BITS;
csr &= ~MUSB_RXCSR_RXPKTRDY;
musb_writew(epio, MUSB_RXCSR, csr);
}
@@ -734,10 +740,15 @@ void musb_g_rx(struct musb *musb, u8 epn
u16 csr;
struct usb_request *request;
void __iomem *mbase = musb->mregs;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep = NULL;
void __iomem *epio = musb->endpoints[epnum].regs;
struct dma_channel *dma;
+ if (musb->endpoints[epnum].is_shared_fifo)
+ musb_ep = &musb->endpoints[epnum].ep_in;
+ else
+ musb_ep = &musb->endpoints[epnum].ep_out;
+
musb_ep_select(mbase, epnum);
request = next_request(musb_ep);
@@ -1559,7 +1570,7 @@ init_peripheral_ep(struct musb *musb, st
ep->is_in = is_in;
INIT_LIST_HEAD(&ep->req_list);
-
+
sprintf(ep->name, "ep%d%s", epnum,
(!epnum || hw_ep->is_shared_fifo) ? "" : (
is_in ? "in" : "out"));
@@ -1758,7 +1769,9 @@ int usb_gadget_register_driver(struct us
}
}
}
-
+#ifndef CONFIG_USB_MUSB_OTG
+ musb_pullup(musb, 1);
+#endif
return retval;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -240,14 +240,14 @@ __acquires(musb->lock)
case USB_REQ_SET_ADDRESS:
/* change it after the status stage */
musb->set_address = true;
- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
handled = 1;
break;
case USB_REQ_CLEAR_FEATURE:
switch (recip) {
case USB_RECIP_DEVICE:
- if (ctrlrequest->wValue
+ if (le16_to_cpu(ctrlrequest->wValue)
!= USB_DEVICE_REMOTE_WAKEUP)
break;
musb->may_wakeup = 0;
@@ -261,8 +261,8 @@ __acquires(musb->lock)
if (num == 0
|| num >= MUSB_C_NUM_EPS
- || ctrlrequest->wValue
- != USB_ENDPOINT_HALT)
+ || le16_to_cpu(ctrlrequest->wValue
+ != USB_ENDPOINT_HALT))
break;
if (ctrlrequest->wIndex & USB_DIR_IN)
@@ -292,7 +292,7 @@ __acquires(musb->lock)
switch (recip) {
case USB_RECIP_DEVICE:
handled = 1;
- switch (ctrlrequest->wValue) {
+ switch (le16_to_cpu(ctrlrequest->wValue)) {
case USB_DEVICE_REMOTE_WAKEUP:
musb->may_wakeup = 1;
break;
@@ -374,8 +374,8 @@ stall:
if (epnum == 0
|| epnum >= MUSB_C_NUM_EPS
- || ctrlrequest->wValue
- != USB_ENDPOINT_HALT)
+ || le16_to_cpu(ctrlrequest->wValue
+ != USB_ENDPOINT_HALT))
break;
ep = musb->endpoints + epnum;
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -139,7 +139,11 @@ static inline void musb_h_tx_start(struc
/* NOTE: no locks here; caller should lock and select EP */
if (ep->epnum) {
txcsr = musb_readw(ep->regs, MUSB_TXCSR);
- txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+#ifndef CONFIG_UBICOM32
+ txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+#else
+ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
+#endif
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
} else {
txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
@@ -198,8 +202,11 @@ musb_start_urb(struct musb *musb, int is
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
- buf = urb->transfer_buffer;
- len = urb->transfer_buffer_length;
+ /* actual_length may be nonzero on retry paths */
+ if (urb->actual_length)
+ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
+ buf = urb->transfer_buffer + urb->actual_length;
+ len = urb->transfer_buffer_length - urb->actual_length;
}
DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
@@ -318,13 +325,13 @@ musb_save_toggle(struct musb_hw_ep *ep,
if (!is_in) {
csr = musb_readw(epio, MUSB_TXCSR);
usb_settoggle(udev, qh->epnum, 1,
- (csr & MUSB_TXCSR_H_DATATOGGLE)
- ? 1 : 0);
+ ((csr & MUSB_TXCSR_H_DATATOGGLE)
+ ? 1 : 0));
} else {
csr = musb_readw(epio, MUSB_RXCSR);
usb_settoggle(udev, qh->epnum, 0,
- (csr & MUSB_RXCSR_H_DATATOGGLE)
- ? 1 : 0);
+ ((csr & MUSB_RXCSR_H_DATATOGGLE)
+ ? 1 : 0));
}
}
@@ -337,9 +344,11 @@ musb_giveback(struct musb_qh *qh, struct
struct musb *musb = ep->musb;
int ready = qh->is_ready;
+#ifndef CONFIG_UBICOM32 /* BUG! */
if (ep->is_shared_fifo)
is_in = 1;
else
+#endif
is_in = usb_pipein(urb->pipe);
/* save toggle eagerly, for paranoia */
@@ -538,7 +547,11 @@ musb_host_packet_rx(struct musb *musb, s
musb_read_fifo(hw_ep, length, buf);
csr = musb_readw(epio, MUSB_RXCSR);
+#ifndef CONFIG_UBICOM32
csr |= MUSB_RXCSR_H_WZC_BITS;
+#else
+ csr &= ~MUSB_RXCSR_H_WZC_BITS;
+#endif
if (unlikely(do_flush))
musb_h_flush_rxfifo(hw_ep, csr);
else {
@@ -572,14 +585,24 @@ musb_rx_reinit(struct musb *musb, struct
/* if programmed for Tx, put it in RX mode */
if (ep->is_shared_fifo) {
+#ifndef CONFIG_UBICOM32
csr = musb_readw(ep->regs, MUSB_TXCSR);
if (csr & MUSB_TXCSR_MODE) {
musb_h_tx_flush_fifo(ep);
musb_writew(ep->regs, MUSB_TXCSR,
MUSB_TXCSR_FRCDATATOG);
}
+#else
/* clear mode (and everything else) to enable Rx */
musb_writew(ep->regs, MUSB_TXCSR, 0);
+ /* scrub all previous state, clearing toggle */
+ csr = musb_readw(ep->regs, MUSB_RXCSR);
+ if (csr & MUSB_RXCSR_RXPKTRDY)
+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+ musb_readw(ep->regs, MUSB_RXCOUNT));
+
+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+#endif
/* scrub all previous state, clearing toggle */
} else {
@@ -680,7 +703,7 @@ static void musb_ep_program(struct musb
/* ASSERT: TXCSR_DMAENAB was already cleared */
/* flush all old state, set default */
- musb_h_tx_flush_fifo(hw_ep);
+ musb_h_tx_flush_fifo(hw_ep);
csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
| MUSB_TXCSR_DMAMODE
| MUSB_TXCSR_FRCDATATOG
@@ -1169,8 +1192,18 @@ void musb_host_tx(struct musb *musb, u8
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
+#ifdef CONFIG_UBICOM32
+ if (hw_ep->is_shared_fifo) {
+ qh = hw_ep->in_qh;
+ }
+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
+ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+ dma ? ", dma" : "");
+#endif
+#endif
urb = next_urb(qh);
+
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1210,9 +1243,14 @@ void musb_host_tx(struct musb *musb, u8
* we have a candidate... NAKing is *NOT* an error
*/
musb_ep_select(mbase, epnum);
+#ifndef CONFIG_UBICOM32
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
+#else
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_TXPKTRDY);
+#endif
goto finish;
}
@@ -1316,8 +1354,14 @@ void musb_host_tx(struct musb *musb, u8
qh->segsize = wLength;
musb_ep_select(mbase, epnum);
+#ifndef CONFIG_UBICOM32
musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+ MUSB_TXCSR_MODE | MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+#else
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+#endif
+
} else
DBG(1, "not complete, but dma enabled?\n");
@@ -1365,6 +1409,49 @@ finish:
#endif
+/* Schedule next QH from musb->in_bulk and move the current qh to
+ * the end; avoids starvation for other endpoints.
+ */
+static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
+{
+ struct dma_channel *dma;
+ struct urb *urb;
+ void __iomem *mbase = musb->mregs;
+ void __iomem *epio = ep->regs;
+ struct musb_qh *cur_qh, *next_qh;
+ u16 rx_csr;
+
+ musb_ep_select(mbase, ep->epnum);
+ dma = is_dma_capable() ? ep->rx_channel : NULL;
+ /* clear nak timeout bit */
+ rx_csr = musb_readw(epio, MUSB_RXCSR);
+ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+ cur_qh = first_qh(&musb->in_bulk);
+ if (cur_qh) {
+ urb = next_urb(cur_qh);
+ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+ dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+ musb->dma_controller->channel_abort(dma);
+ urb->actual_length += dma->actual_len;
+ dma->actual_len = 0L;
+ }
+ musb_save_toggle(ep, 1, urb);
+
+ /* move cur_qh to end of queue */
+ list_move_tail(&cur_qh->ring, &musb->in_bulk);
+
+ /* get the next qh from musb->in_bulk */
+ next_qh = first_qh(&musb->in_bulk);
+
+ /* set rx_reinit and schedule the next qh */
+ ep->rx_reinit = 1;
+ musb_start_urb(musb, 1, next_qh);
+ }
+}
+
/*
* Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
* and high-bandwidth IN transfer cases.
@@ -1383,7 +1470,7 @@ void musb_host_rx(struct musb *musb, u8
bool done = false;
u32 status;
struct dma_channel *dma;
-
+
musb_ep_select(mbase, epnum);
urb = next_urb(qh);
@@ -1407,6 +1494,13 @@ void musb_host_rx(struct musb *musb, u8
pipe = urb->pipe;
+#ifdef CONFIG_UBICOM32
+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
+ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+ xfer_len, dma ? ", dma" : "");
+#endif
+#endif
+
DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
epnum, rx_csr, urb->actual_length,
dma ? dma->actual_len : 0);
@@ -1428,18 +1522,30 @@ void musb_host_rx(struct musb *musb, u8
} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
if (USB_ENDPOINT_XFER_ISOC != qh->type) {
- /* NOTE this code path would be a good place to PAUSE a
- * transfer, if there's some other (nonperiodic) rx urb
- * that could use this fifo. (dma complicates it...)
+ DBG(6, "RX end %d NAK timeout\n", epnum);
+
+ /* NOTE: NAKing is *NOT* an error, so we want to
+ * continue. Except ... if there's a request for
+ * another QH, use that instead of starving it.
*
- * if (bulk && qh->ring.next != &musb->in_bulk), then
- * we have a candidate... NAKing is *NOT* an error
+ * Devices like Ethernet and serial adapters keep
+ * reads posted at all times, which will starve
+ * other devices without this logic.
*/
- DBG(6, "RX end %d NAK timeout\n", epnum);
+ if (usb_pipebulk(urb->pipe)
+ && qh->mux == 1
+ && !list_is_singular(&musb->in_bulk)) {
+ musb_bulk_rx_nak_timeout(musb, hw_ep);
+ return;
+ }
musb_ep_select(mbase, epnum);
+#ifndef CONFIG_UBICOM32
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS
| MUSB_RXCSR_H_REQPKT);
+#else
+ musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
+#endif
goto finish;
} else {
@@ -1495,8 +1601,13 @@ void musb_host_rx(struct musb *musb, u8
rx_csr &= ~MUSB_RXCSR_H_REQPKT;
musb_ep_select(mbase, epnum);
+#ifndef CONFIG_UBICOM32
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS | rx_csr);
+#else
+ musb_writew(epio, MUSB_RXCSR,
+ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
+#endif
}
#endif
if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
@@ -1526,7 +1637,7 @@ void musb_host_rx(struct musb *musb, u8
else
done = false;
- } else {
+ } else {
/* done if urb buffer is full or short packet is recd */
done = (urb->actual_length + xfer_len >=
urb->transfer_buffer_length
@@ -1743,8 +1854,12 @@ static int musb_schedule(
if (musb->periodic[epnum])
continue;
hw_ep = &musb->endpoints[epnum];
+#ifndef CONFIG_UBICOM32
if (hw_ep == musb->bulk_ep)
- continue;
+#else
+ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
+#endif
+ continue;
if (is_in)
diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
@@ -1756,7 +1871,14 @@ static int musb_schedule(
best_end = epnum;
}
}
+
+#ifdef CONFIG_UBICOM32
+ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
+ best_end = -1;
+#endif
+
/* use bulk reserved ep1 if no other ep is free */
+#ifndef CONFIG_UBICOM32
if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
hw_ep = musb->bulk_ep;
if (is_in)
@@ -1767,6 +1889,22 @@ static int musb_schedule(
} else if (best_end < 0) {
return -ENOSPC;
}
+#else
+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+ /* hw_ep = musb->bulk_ep; */
+ if (is_in) {
+ head = &musb->in_bulk;
+ hw_ep = musb->bulk_ep_in; /* UBICOM */
+ }
+ else {
+ head = &musb->out_bulk;
+ hw_ep = musb->bulk_ep_out; /* UBICOM */
+ }
+ goto success;
+ } else if (best_end < 0) {
+ return -ENOSPC;
+ }
+#endif
idle = 1;
qh->mux = 0;
@@ -1779,6 +1917,13 @@ success:
list_add_tail(&qh->ring, head);
qh->mux = 1;
}
+ /*
+ * It's not make sense to set NAK timeout when qh->mux = 0,
+ * There is nothing else to schedule
+ */
+ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
+ qh->intv_reg = 0;
+
qh->hw_ep = hw_ep;
qh->hep->hcpriv = qh;
if (idle)
@@ -1884,6 +2029,15 @@ static int musb_urb_enqueue(
case USB_ENDPOINT_XFER_ISOC:
/* iso always uses log encoding */
break;
+#ifdef COMFIG_UBICOM32
+ case USB_ENDPOINT_XFER_BULK:
+ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
+ else
+ interval = 0;
+ break;
+#endif
+
default:
/* REVISIT we actually want to use NAK limits, hinting to the
* transfer scheduling logic to try some other qh, e.g. try
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -56,6 +56,7 @@ static inline void writesb(const void __
#endif
+#ifndef CONFIG_UBICOM32
/* NOTE: these offsets are all in bytes */
static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
@@ -70,7 +71,37 @@ static inline void musb_writew(void __io
static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
{ __raw_writel(data, addr + offset); }
+#else
+#include <asm/ubicom32-tio.h>
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+{
+ u16 data;
+ usb_tio_read_u16((u32)(addr + offset), &data);
+ return data;
+}
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+ u8 data;
+ usb_tio_read_u8((u32)(addr + offset), &data);
+ return data;
+}
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+{
+ usb_tio_write_u16((u32)(addr + offset), data);
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+ usb_tio_write_u8((u32)(addr + offset), data);
+}
+
+static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
+{
+ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
+}
+#endif /* CONFIG_UBICOM32 */
#ifdef CONFIG_USB_TUSB6010
@@ -104,7 +135,7 @@ static inline void musb_writeb(void __io
__raw_writew(tmp, addr + (offset & ~1));
}
-#else
+#elif !defined(CONFIG_UBICOM32)
static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
{ return __raw_readb(addr + offset); }
--- /dev/null
+++ b/drivers/usb/musb/ubi32_usb.c
@@ -0,0 +1,156 @@
+/*
+ * drivers/usb/musb/ubi32_usb.c
+ * Ubicom32 usb controller driver.
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * Derived from the Texas Instruments Inventra Controller Driver for Linux.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/io.h>
+#include <asm/ip5000.h>
+#include "musb_core.h"
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+
+int musb_platform_set_mode(struct musb *musb, u8 musb_mode) {
+ return 0;
+}
+
+static void ip5k_usb_hcd_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void ip5k_usb_hcd_set_vbus(struct musb *musb, int is_on)
+{
+ u8 devctl;
+ /* HDRC controls CPEN, but beware current surges during device
+ * connect. They can trigger transient overcurrent conditions
+ * that must be ignored.
+ */
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ if (is_on) {
+ musb->is_active = 1;
+ musb->xceiv.default_a = 1;
+ musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+
+ MUSB_HST_MODE(musb);
+ } else {
+ musb->is_active = 0;
+
+ /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
+ * jumping right to B_IDLE...
+ */
+
+ musb->xceiv.default_a = 0;
+ musb->xceiv.state = OTG_STATE_B_IDLE;
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ MUSB_DEV_MODE(musb);
+ }
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ DBG(1, "VBUS %s, devctl %02x "
+ /* otg %3x conf %08x prcm %08x */ "\n",
+ otg_state_string(musb),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int ip5k_usb_hcd_set_power(struct otg_transceiver *x, unsigned mA)
+{
+ return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+int __init musb_platform_init(struct musb *musb)
+{
+
+#ifdef CONFIG_UBICOM32_V4
+ u32_t chip_id;
+ asm volatile (
+ "move.4 %0, CHIP_ID \n\t"
+ : "=r" (chip_id)
+ );
+ if (chip_id == 0x30001) {
+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 30);
+ udelay(1);
+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 31);
+ } else {
+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 17);
+ udelay(1);
+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_TEST)) &= ~(1 << 14);
+ }
+#endif
+
+ *((u32_t *)(GENERAL_CFG_BASE + GEN_USB_PHY_CFG)) |= ((1 << 14) | (1 <<15));
+
+ /* The i-clk is AUTO gated. Hence there is no need
+ * to disable it until the driver is shutdown */
+
+ clk_enable(musb->clock);
+ musb_platform_resume(musb);
+
+ ip5k_usb_hcd_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+ if (is_host_enabled(musb))
+ musb->board_set_vbus = ip5k_usb_hcd_set_vbus;
+ if (is_peripheral_enabled(musb))
+ musb->xceiv.set_power = ip5k_usb_hcd_set_power;
+
+ return 0;
+}
+
+
+int musb_platform_suspend(struct musb *musb)
+{
+ return 0;
+}
+int musb_platform_resume(struct musb *musb)
+{
+ return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+ ip5k_usb_hcd_vbus_power(musb, 0 /*off*/, 1);
+ musb_platform_suspend(musb);
+ return 0;
+}
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -84,6 +84,14 @@ config LCD_TOSA
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
+config LCD_UBICOM32
+ tristate "Ubicom Backlight Driver"
+ depends on LCD_CLASS_DEVICE && UBICOM32
+ default n
+ help
+ If you have a Ubicom32 based system with an LCD panel, say Y to enable
+ the power control driver for it.
+
#
# Backlight
#
@@ -214,3 +222,11 @@ config BACKLIGHT_SAHARA
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
+
+config BACKLIGHT_UBICOM32
+ tristate "Ubicom Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
+ default n
+ help
+ If you have a Ubicom32 based system with a backlight say Y to enable the
+ backlight driver.
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
+obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
@@ -22,4 +24,4 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
-
+obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
--- /dev/null
+++ b/drivers/video/backlight/ubicom32bl.c
@@ -0,0 +1,378 @@
+/*
+ * drivers/video/backlight/ubicom32bl.c
+ * Backlight driver for the Ubicom32 platform
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <asm/ubicom32bl.h>
+#include <asm/ip5000.h>
+
+#define DRIVER_NAME "ubicom32bl"
+#define UBICOM32BL_MAX_BRIGHTNESS 255
+
+struct ubicom32bl_data {
+ /*
+ * Pointer to the platform data structure. Keep this around since we need values
+ * from it to set the backlight intensity.
+ */
+ const struct ubicom32bl_platform_data *pdata;
+
+ /*
+ * Backlight device, we have to save this for use when we remove ourselves.
+ */
+ struct backlight_device *bldev;
+
+ /*
+ * Current intensity, used for get_intensity.
+ */
+ int cur_intensity;
+
+ /*
+ * Init function for PWM
+ */
+ int (*init_fn)(struct ubicom32bl_data *);
+
+ /*
+ * Set intensity function depending on the backlight type
+ */
+ int (*set_intensity_fn)(struct ubicom32bl_data *, int);
+};
+
+/*
+ * ubicom32bl_set_intensity_gpio
+ */
+static int ubicom32bl_set_intensity_gpio(struct ubicom32bl_data *ud, int intensity)
+{
+ ud->cur_intensity = intensity ? 255 : 0;
+
+ if (intensity) {
+ // set gpio
+ return 0;
+ }
+
+ // clear gpio
+ return 0;
+}
+
+/*
+ * ubicom32bl_set_intensity_hw
+ */
+static int ubicom32bl_set_intensity_hw(struct ubicom32bl_data *ud, int intensity)
+{
+ u16_t period = ud->pdata->pwm_period;
+ u16_t duty;
+
+ /*
+ * Calculate the new duty cycle
+ */
+ duty = (period * intensity) / (UBICOM32BL_MAX_BRIGHTNESS + 1);
+
+ /*
+ * Set the new duty cycle
+ */
+ switch (ud->pdata->pwm_channel) {
+ case 0:
+ /*
+ * Channel 0 is in the lower half of PORT C ctl0 and ctl1
+ */
+ UBICOM32_IO_PORT(RC)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
+ break;
+
+ case 1:
+ /*
+ * Channel 1 is in the upper half of PORT C ctl0 and ctl2
+ */
+ UBICOM32_IO_PORT(RC)->ctl2 = (ud->pdata->pwm_period << 16) | duty;
+ break;
+
+ case 2:
+ /*
+ * Channel 2 is in PORT H ctl0 and ctl1
+ */
+ UBICOM32_IO_PORT(RH)->ctl1 = (ud->pdata->pwm_period << 16) | duty;
+ break;
+ }
+
+ ud->cur_intensity = intensity;
+
+ return 0;
+}
+
+/*
+ * ubicom32bl_set_intensity
+ */
+static int ubicom32bl_set_intensity(struct backlight_device *bd)
+{
+ struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
+ int intensity = bd->props.brightness;
+
+ /*
+ * If we're blanked the the intensity doesn't matter.
+ */
+ if ((bd->props.power != FB_BLANK_UNBLANK) || (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
+ intensity = 0;
+ }
+
+ /*
+ * Check for inverted backlight.
+ */
+ if (ud->pdata->invert) {
+ intensity = UBICOM32BL_MAX_BRIGHTNESS - intensity;
+ }
+
+ if (ud->set_intensity_fn) {
+ return ud->set_intensity_fn(ud, intensity);
+ }
+
+ return -ENXIO;
+}
+
+/*
+ * ubicom32bl_get_intensity
+ * Return the current intensity of the backlight.
+ */
+static int ubicom32bl_get_intensity(struct backlight_device *bd)
+{
+ struct ubicom32bl_data *ud = (struct ubicom32bl_data *)bl_get_data(bd);
+
+ return ud->cur_intensity;
+}
+
+/*
+ * ubicom32bl_init_hw_pwm
+ * Set the appropriate PWM registers
+ */
+static int ubicom32bl_init_hw_pwm(struct ubicom32bl_data *ud)
+{
+ /*
+ * bit 13: enable
+ */
+ u16_t pwm_cfg = (1 << 13) | (ud->pdata->pwm_prescale << 8) ;
+
+ switch (ud->pdata->pwm_channel) {
+ case 0:
+ /*
+ * Channel 0 is in the lower half of PORT C ctl0 and ctl1
+ */
+ UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF;
+ UBICOM32_IO_PORT(RC)->ctl0 |= pwm_cfg;
+ UBICOM32_IO_PORT(RC)->ctl1 = ud->pdata->pwm_period << 16;
+ break;
+
+ case 1:
+ /*
+ * Channel 1 is in the upper half of PORT C ctl0 and ctl2
+ */
+ UBICOM32_IO_PORT(RC)->ctl0 &= ~0xFFFF0000;
+ UBICOM32_IO_PORT(RC)->ctl0 |= (pwm_cfg << 16);
+ UBICOM32_IO_PORT(RC)->ctl2 = ud->pdata->pwm_period << 16;
+ break;
+
+ case 2:
+ /*
+ * Channel 2 is in PORT H ctl0 and ctl1
+ */
+ UBICOM32_IO_PORT(RH)->ctl0 &= ~0xFFFF0000;
+ UBICOM32_IO_PORT(RH)->ctl0 = pwm_cfg;
+ UBICOM32_IO_PORT(RH)->ctl1 = ud->pdata->pwm_period << 16;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * ubicom32bl_init_gpio
+ * Allocate the appropriate GPIO
+ */
+static int ubicom32bl_init_gpio(struct ubicom32bl_data *ud)
+{
+ return 0;
+}
+
+static struct backlight_ops ubicom32bl_ops = {
+ .get_brightness = ubicom32bl_get_intensity,
+ .update_status = ubicom32bl_set_intensity,
+};
+
+/*
+ * ubicom32bl_probe
+ */
+static int ubicom32bl_probe(struct platform_device *pdev)
+{
+ const struct ubicom32bl_platform_data *pdata = pdev->dev.platform_data;
+ struct ubicom32bl_data *ud;
+ struct backlight_device *bldev;
+ int retval;
+
+ /*
+ * Check to see if we have any platform data, if we don't then the backlight is not
+ * configured on this device.
+ */
+ if (!pdata) {
+ return -ENODEV;
+ }
+
+ /*
+ * Allocate our private data
+ */
+ ud = kzalloc(sizeof(struct ubicom32bl_data), GFP_KERNEL);
+ if (!ud) {
+ return -ENOMEM;
+ }
+
+ ud->pdata = pdata;
+
+ /*
+ * Check to see that the platform data is valid for this driver
+ */
+ switch (pdata->type) {
+ case UBICOM32BL_TYPE_PWM:
+ {
+ /*
+ * Make sure we have a PWM peripheral
+ */
+ u32_t chipid;
+ asm volatile (
+ "move.4 %0, CHIP_ID \n\t"
+ : "=r" (chipid)
+ );
+ if (chipid != 0x00030001) {
+ retval = -ENODEV;
+ goto fail;
+ }
+
+ if (pdata->pwm_channel > 3) {
+ retval = -ENODEV;
+ goto fail;
+ }
+ if (pdata->pwm_prescale > 16) {
+ retval = -EINVAL;
+ goto fail;
+ }
+
+ ud->init_fn = ubicom32bl_init_hw_pwm;
+ ud->set_intensity_fn = ubicom32bl_set_intensity_hw;
+ break;
+ }
+
+ case UBICOM32BL_TYPE_PWM_HRT:
+ // For now, PWM HRT devices are treated as binary lights.
+
+ case UBICOM32BL_TYPE_BINARY:
+ ud->init_fn = ubicom32bl_init_gpio;
+ ud->set_intensity_fn = ubicom32bl_set_intensity_gpio;
+ break;
+ }
+
+ /*
+ * Register our backlight device
+ */
+ bldev = backlight_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32bl_ops);
+ if (IS_ERR(bldev)) {
+ retval = PTR_ERR(bldev);
+ goto fail;
+ }
+
+ ud->bldev = bldev;
+ ud->cur_intensity = pdata->default_intensity;
+ platform_set_drvdata(pdev, ud);
+
+ /*
+ * Start up the backlight at the prescribed default intensity
+ */
+ bldev->props.power = FB_BLANK_UNBLANK;
+ bldev->props.max_brightness = UBICOM32BL_MAX_BRIGHTNESS;
+ bldev->props.brightness = pdata->default_intensity;
+
+ if (ud->init_fn) {
+ if (ud->init_fn(ud) != 0) {
+ retval = -ENODEV;
+ backlight_device_unregister(ud->bldev);
+ goto fail;
+ }
+ }
+ ubicom32bl_set_intensity(bldev);
+
+ printk(KERN_INFO DRIVER_NAME ": Backlight driver started\n");
+
+ return 0;
+
+fail:
+ platform_set_drvdata(pdev, NULL);
+ kfree(ud);
+ return retval;
+}
+
+/*
+ * ubicom32bl_remove
+ */
+static int __exit ubicom32bl_remove(struct platform_device *pdev)
+{
+ struct ubicom32bl_data *ud = platform_get_drvdata(pdev);
+
+ backlight_device_unregister(ud->bldev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(ud);
+
+ return 0;
+}
+
+static struct platform_driver ubicom32bl_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+
+ .remove = __exit_p(ubicom32bl_remove),
+};
+
+/*
+ * ubicom32bl_init
+ */
+static int __init ubicom32bl_init(void)
+{
+ return platform_driver_probe(&ubicom32bl_driver, ubicom32bl_probe);
+}
+module_init(ubicom32bl_init);
+
+/*
+ * ubicom32bl_exit
+ */
+static void __exit ubicom32bl_exit(void)
+{
+ platform_driver_unregister(&ubicom32bl_driver);
+}
+module_exit(ubicom32bl_exit);
+
+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom32 backlight driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/video/backlight/ubicom32lcd.c
@@ -0,0 +1,194 @@
+/*
+ * drivers/vdeio/backlight/ubicom32lcd.c
+ * LCD driver for the Ubicom32 platform
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <asm/ubicom32lcd.h>
+#include <asm/ip5000.h>
+
+#define DRIVER_NAME "ubicom32lcd"
+
+struct ubicom32lcd_data {
+ /*
+ * Pointer to the platform data structure. Keep this around since we need values
+ * from it to set the backlight intensity.
+ */
+ const struct ubicom32lcd_platform_data *pdata;
+
+ /*
+ * LCD device, we have to save this for use when we remove ourselves.
+ */
+ struct lcd_device *lcddev;
+};
+
+/*
+ * ubicom32lcd_set_power
+ */
+static int ubicom32lcd_set_power(struct lcd_device *ld, int power)
+{
+ struct ubicom32lcd_data *ud = (struct ubicom32lcd_data *)lcd_get_data(ld);
+ if (power == FB_BLANK_UNBLANK) {
+ gpio_direction_output(ud->pdata->vgh_gpio, ud->pdata->vgh_polarity);
+ return 0;
+ }
+
+ gpio_direction_output(ud->pdata->vgh_gpio, !ud->pdata->vgh_polarity);
+ return 0;
+}
+
+/*
+ * ubicom32lcd_get_power
+ */
+static int ubicom32lcd_get_power(struct lcd_device *ld)
+{
+ struct ubicom32lcd_data *ud = (struct ubicom32lcd_data *)lcd_get_data(ld);
+ int vgh = gpio_get_value(ud->pdata->vgh_gpio);
+ if ((vgh && ud->pdata->vgh_polarity) || (!vgh && !ud->pdata->vgh_polarity)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static struct lcd_ops ubicom32lcd_ops = {
+ .get_power = ubicom32lcd_get_power,
+ .set_power = ubicom32lcd_set_power,
+};
+
+/*
+ * ubicom32lcd_probe
+ */
+static int ubicom32lcd_probe(struct platform_device *pdev)
+{
+ const struct ubicom32lcd_platform_data *pdata = pdev->dev.platform_data;
+ struct ubicom32lcd_data *ud;
+ struct lcd_device *lcddev;
+ int retval;
+
+ /*
+ * Check to see if we have any platform data, if we don't have a LCD to control
+ */
+ if (!pdata) {
+ return -ENODEV;
+ }
+
+ /*
+ * Allocate our private data
+ */
+ ud = kzalloc(sizeof(struct ubicom32lcd_data), GFP_KERNEL);
+ if (!ud) {
+ return -ENOMEM;
+ }
+
+ ud->pdata = pdata;
+
+ /*
+ * Request our GPIOs
+ */
+ retval = gpio_request(pdata->vgh_gpio, "vgh");
+ if (retval) {
+ dev_err(&pdev->dev, "Failed to allocate vgh GPIO\n");
+ goto fail_gpio;
+ }
+
+ /*
+ * Register our lcd device
+ */
+ lcddev = lcd_device_register(DRIVER_NAME, &pdev->dev, ud, &ubicom32lcd_ops);
+ if (IS_ERR(lcddev)) {
+ retval = PTR_ERR(lcddev);
+ goto fail;
+ }
+
+ ud->lcddev = lcddev;
+ platform_set_drvdata(pdev, ud);
+
+ ubicom32lcd_set_power(lcddev, FB_BLANK_UNBLANK);
+
+ printk(KERN_INFO DRIVER_NAME ": LCD driver started\n");
+
+ return 0;
+
+fail:
+ gpio_free(pdata->vgh_gpio);
+
+fail_gpio:
+ platform_set_drvdata(pdev, NULL);
+ kfree(ud);
+ return retval;
+}
+
+/*
+ * ubicom32lcd_remove
+ */
+static int __exit ubicom32lcd_remove(struct platform_device *pdev)
+{
+ struct ubicom32lcd_data *ud = platform_get_drvdata(pdev);
+
+ lcd_device_unregister(ud->lcddev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(ud);
+
+ return 0;
+}
+
+static struct platform_driver ubicom32lcd_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+
+ .remove = __exit_p(ubicom32lcd_remove),
+};
+
+/*
+ * ubicom32lcd_init
+ */
+static int __init ubicom32lcd_init(void)
+{
+ return platform_driver_probe(&ubicom32lcd_driver, ubicom32lcd_probe);
+}
+module_init(ubicom32lcd_init);
+
+/*
+ * ubicom32lcd_exit
+ */
+static void __exit ubicom32lcd_exit(void)
+{
+ platform_driver_unregister(&ubicom32lcd_driver);
+}
+module_exit(ubicom32lcd_exit);
+
+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom32 backlight driver");
+MODULE_LICENSE("GPL");
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -609,6 +609,25 @@ config FB_BFIN_T350MCQB
This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+config FB_UBICOM32
+ tristate "Ubicom32 Frame Buffer driver"
+ depends on FB && UBICOM32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
+ help
+ This is the framebuffer device driver for the Ubicom32 architecture.
+
+config FB_UBICOM32_VIRTUAL
+ tristate "Ubicom32 Virtual Frame Buffer driver"
+ depends on FB && UBICOM32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FONT_6x11 if FRAMEBUFFER_CONSOLE
+ help
+ This is a virtual framebuffer device driver for the Ubicom32 architecture.
config FB_STI
tristate "HP STI frame buffer device support"
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16) += vga
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
--- /dev/null
+++ b/drivers/video/ubicom32fb.c
@@ -0,0 +1,777 @@
+/*
+ * drivers/video/ubicom32fb.c
+ * Ubicom32 frame buffer driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+/*
+ * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
+ * Geert Uytterhoeven.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/ip5000.h>
+#include <asm/vdc_tio.h>
+#include <asm/ubicom32fb.h>
+
+#define DRIVER_NAME "ubicom32fb"
+#define DRIVER_DESCRIPTION "Ubicom32 frame buffer driver"
+
+#define PALETTE_ENTRIES_NO 16
+
+/*
+ * Option variables
+ *
+ * vram_size: VRAM size in kilobytes, subject to alignment
+ */
+static int vram_size = 0;
+module_param(vram_size, int, 0);
+MODULE_PARM_DESC(vram, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
+static int init_value = 0;
+module_param(init_value, int, 0);
+MODULE_PARM_DESC(init, "Initial value of the framebuffer (16-bit number).");
+
+/*
+ * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
+ */
+static struct fb_fix_screeninfo ubicom32fb_fix = {
+ .id = "Ubicom32",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .accel = FB_ACCEL_NONE
+};
+
+/*
+ * Filled in at probe time when we find out what the hardware supports
+ */
+static struct fb_var_screeninfo ubicom32fb_var;
+
+/*
+ * Private data structure
+ */
+struct ubicom32fb_drvdata {
+ struct fb_info *fbinfo;
+ bool cmap_alloc;
+
+ /*
+ * The address of the framebuffer in memory
+ */
+ void *fb;
+ void *fb_aligned;
+
+ /*
+ * Total size of vram including alignment allowance
+ */
+ u32 total_vram_size;
+
+ /*
+ * Interrupt to set when changing registers
+ */
+ u32 vp_int;
+
+ /*
+ * Optional: Interrupt used by TIO to signal us
+ */
+ u32 rx_int;
+
+ /*
+ * Base address of the regs for VDC_TIO
+ */
+ volatile struct vdc_tio_vp_regs *regs;
+
+ /*
+ * non-zero if we are in yuv mode
+ */
+ u8_t is_yuv;
+
+ /*
+ * Fake palette of 16 colors
+ */
+ u32 pseudo_palette[PALETTE_ENTRIES_NO];
+
+ /*
+ * Wait queue and lock used to block when we need to wait
+ * for something to happen.
+ */
+ wait_queue_head_t waitq;
+ struct mutex lock;
+
+};
+
+/*
+ * ubicom32fb_set_next_frame
+ * Sets the next frame buffer to display
+ *
+ * if sync is TRUE then this function will block until the hardware
+ * acknowledges the change
+ */
+static inline void ubicom32fb_set_next_frame(struct ubicom32fb_drvdata *ud, void *fb, u8_t sync)
+{
+ ud->regs->next_frame_flags = ud->is_yuv ? VDCTIO_NEXT_FRAME_FLAG_YUV : 0;
+ ud->regs->next_frame = (void *)((u32_t)fb | 1);
+
+ /*
+ * If we have interrupts, then we can wait on it
+ */
+ if (ud->rx_int != -1) {
+ DEFINE_WAIT(wait);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ud->lock, flags);
+ prepare_to_wait(&ud->waitq, &wait, TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&ud->lock, flags);
+ schedule();
+ finish_wait(&ud->waitq, &wait);
+ return;
+ }
+
+ /*
+ * No interrupt, we will just spin here
+ */
+ while (sync && ((u32_t)ud->regs->next_frame & 1));
+}
+
+/*
+ * ubicom32fb_send_command
+ * Sends a command/data pair to the VDC
+ */
+static inline void ubicom32fb_send_command(struct ubicom32fb_drvdata *ud, u16 command, u8_t block)
+{
+ ud->regs->command = command;
+ ubicom32_set_interrupt(ud->vp_int);
+ while (block && ud->regs->command);
+}
+
+/*
+ * ubicom32fb_ioctl
+ * Handles any ioctls sent to us
+ */
+static int ubicom32fb_ioctl(struct fb_info *fbi, unsigned int cmd,
+ unsigned long arg)
+{
+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
+ void __user *argp = (void __user *)arg;
+ int retval = -EFAULT;
+
+ switch (cmd) {
+ case UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC:
+ // check alignment, return -EINVAL if necessary
+ ubicom32fb_set_next_frame(ud, argp, 1);
+ retval = 0;
+ break;
+
+ case UBICOM32FB_IOCTL_SET_NEXT_FRAME:
+ // check alignment, return -EINVAL if necessary
+ ubicom32fb_set_next_frame(ud, argp, 0);
+ retval = 0;
+ break;
+
+ case UBICOM32FB_IOCTL_SET_MODE:
+ if (!(ud->regs->caps & VDCTIO_CAPS_SUPPORTS_SCALING)) {
+ break;
+ } else {
+ struct ubicom32fb_mode mode;
+ volatile struct vdc_tio_vp_regs *regs = ud->regs;
+ u32_t flags = 0;
+
+ if (copy_from_user(&mode, argp, sizeof(mode))) {
+ break;
+ }
+
+ regs->x_in = mode.width;
+ regs->y_in = mode.height;
+ regs->x_out = regs->xres;
+ regs->y_out = regs->yres;
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER) {
+ flags |= VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER) {
+ flags |= VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER;
+ }
+ ud->is_yuv = mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV;
+ if (ud->is_yuv) {
+ flags |= VDCTIO_SCALE_FLAG_YUV;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255) {
+ flags |= VDCTIO_SCALE_FLAG_VRANGE_16_255;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255) {
+ flags |= VDCTIO_SCALE_FLAG_VRANGE_0_255;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB) {
+ flags |= VDCTIO_SCALE_FLAG_VSUB;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1) {
+ flags |= VDCTIO_SCALE_FLAG_HSUB_2_1;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1) {
+ flags |= VDCTIO_SCALE_FLAG_HSUB_1_1;
+ }
+ if (mode.flags & UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE) {
+ flags |= VDCTIO_SCALE_FLAG_ENABLE;
+ }
+ if (mode.next_frame) {
+ flags |= VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER;
+ regs->next_frame = mode.next_frame;
+ }
+
+ regs->scale_flags = flags;
+ ubicom32fb_send_command(ud, VDCTIO_COMMAND_SET_SCALE_MODE, 1);
+ retval = 0;
+ break;
+ }
+
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+
+ return retval;
+}
+
+/*
+ * ubicom32fb_interrupt
+ * Called by the OS when the TIO has set the rx_int
+ */
+static irqreturn_t ubicom32fb_interrupt(int vec, void *appdata)
+{
+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)appdata;
+
+ spin_lock(&ud->lock);
+ if (waitqueue_active(&ud->waitq)) {
+ wake_up(&ud->waitq);
+ }
+ spin_unlock(&ud->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ubicom32fb_pan_display
+ * Pans the display to a given location. Supports only y direction panning.
+ */
+static int ubicom32fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+ struct ubicom32fb_drvdata *ud = (struct ubicom32fb_drvdata *)fbi->par;
+ void *new_addr;
+
+ /*
+ * Get the last y line that would be displayed. Since we don't support YWRAP,
+ * it must be less than our virtual y size.
+ */
+ u32 lasty = var->yoffset + var->yres;
+ if (lasty > fbi->var.yres_virtual) {
+ /*
+ * We would fall off the end of our frame buffer if we panned here.
+ */
+ return -EINVAL;
+ }
+
+ if (var->xoffset) {
+ /*
+ * We don't support panning in the x direction
+ */
+ return -EINVAL;
+ }
+
+ /*
+ * Everything looks sane, go ahead and pan
+ *
+ * We have to calculate a new address for the VDC to look at
+ */
+ new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
+
+ /*
+ * Send down the command. The buffer will switch at the next vertical blank
+ */
+ ubicom32fb_set_next_frame(ud, (void *)new_addr, 0);
+
+ return 0;
+}
+
+/*
+ * ubicom32fb_setcolreg
+ * Sets a color in our virtual palette
+ */
+static int ubicom32fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
+{
+ u32 *palette = fbi->pseudo_palette;
+
+ if (regno >= PALETTE_ENTRIES_NO) {
+ return -EINVAL;
+ }
+
+ /*
+ * We only use 8 bits from each color
+ */
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ /*
+ * Convert any grayscale values
+ */
+ if (fbi->var.grayscale) {
+ u16 gray = red + green + blue;
+ gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
+ gray >>= 2;
+ if (gray > 255) {
+ gray = 255;
+ }
+ red = gray;
+ blue = gray;
+ green = gray;
+ }
+
+ palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
+ (blue << fbi->var.blue.offset);
+
+ return 0;
+}
+
+/*
+ * ubicom32fb_mmap
+ */
+static int ubicom32fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct ubicom32fb_drvdata *drvdata = (struct ubicom32fb_drvdata *)info->par;
+
+ vma->vm_start = (unsigned long)(drvdata->fb_aligned);
+
+ vma->vm_end = vma->vm_start + info->fix.smem_len;
+
+ /* For those who don't understand how mmap works, go read
+ * Documentation/nommu-mmap.txt.
+ * For those that do, you will know that the VM_MAYSHARE flag
+ * must be set in the vma->vm_flags structure on noMMU
+ * Other flags can be set, and are documented in
+ * include/linux/mm.h
+ */
+
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
+
+ return 0;
+}
+
+/*
+ * ubicom32fb_blank
+ */
+static int ubicom32fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ return 0;
+#if 0
+ struct ubicom32fb_drvdata *drvdata = to_ubicom32fb_drvdata(fbi);
+
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ /* turn on panel */
+ ubicom32fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+ break;
+
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ /* turn off panel */
+ ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
+ default:
+ break;
+
+ }
+ return 0; /* success */
+#endif
+}
+
+static struct fb_ops ubicom32fb_ops =
+{
+ .owner = THIS_MODULE,
+ .fb_pan_display = ubicom32fb_pan_display,
+ .fb_setcolreg = ubicom32fb_setcolreg,
+ .fb_blank = ubicom32fb_blank,
+ .fb_mmap = ubicom32fb_mmap,
+ .fb_ioctl = ubicom32fb_ioctl,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+/*
+ * ubicom32fb_release
+ */
+static int ubicom32fb_release(struct device *dev)
+{
+ struct ubicom32fb_drvdata *ud = dev_get_drvdata(dev);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+ //ubicom32fb_blank(VESA_POWERDOWN, &drvdata->info);
+#endif
+
+ unregister_framebuffer(ud->fbinfo);
+
+ if (ud->cmap_alloc) {
+ fb_dealloc_cmap(&ud->fbinfo->cmap);
+ }
+
+ if (ud->fb) {
+ kfree(ud->fb);
+ }
+
+ if (ud->rx_int != -1) {
+ free_irq(ud->rx_int, ud);
+ }
+
+ /*
+ * Turn off the display
+ */
+ //ubicom32fb_out_be32(drvdata, REG_CTRL, 0);
+ //iounmap(drvdata->regs);
+
+ framebuffer_release(ud->fbinfo);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+/*
+ * ubicom32fb_platform_probe
+ */
+static int __init ubicom32fb_platform_probe(struct platform_device *pdev)
+{
+ struct ubicom32fb_drvdata *ud;
+ struct resource *irq_resource_rx;
+ struct resource *irq_resource_tx;
+ struct resource *mem_resource;
+ struct fb_info *fbinfo;
+ int rc;
+ size_t fbsize;
+ struct device *dev = &pdev->dev;
+ int offset;
+ struct vdc_tio_vp_regs *regs;
+
+ /*
+ * Get our resources
+ */
+ irq_resource_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq_resource_tx) {
+ dev_err(dev, "No tx IRQ resource assigned\n");
+ return -ENODEV;
+ }
+
+ irq_resource_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+ if (!irq_resource_rx) {
+ dev_err(dev, "No rx IRQ resource assigned\n");
+ return -ENODEV;
+ }
+
+ mem_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_resource || !mem_resource->start) {
+ dev_err(dev, "No mem resource assigned\n");
+ return -ENODEV;
+ }
+ regs = (struct vdc_tio_vp_regs *)mem_resource->start;
+ if (regs->version != VDCTIO_VP_VERSION) {
+ dev_err(dev, "VDCTIO is not compatible with this driver tio:%x drv:%x\n",
+ regs->version, VDCTIO_VP_VERSION);
+ return -ENODEV;
+ }
+
+ /*
+ * This is the minimum VRAM size
+ */
+ fbsize = regs->xres * regs->yres * (regs->bpp / 8);
+ if (!vram_size) {
+ vram_size = (fbsize + 1023) / 1024;
+ } else {
+ if (fbsize > (vram_size * 1024)) {
+ dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
+ return -ENOMEM; // should be ebadparam?
+ }
+ }
+
+ /*
+ * Allocate the framebuffer instance + our private data
+ */
+ fbinfo = framebuffer_alloc(sizeof(struct ubicom32fb_drvdata), &pdev->dev);
+ if (!fbinfo) {
+ dev_err(dev, "Not enough memory to allocate instance.\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Fill in our private data.
+ */
+ ud = (struct ubicom32fb_drvdata *)fbinfo->par;
+ ud->fbinfo = fbinfo;
+ ud->regs = (struct vdc_tio_vp_regs *)(mem_resource->start);
+ dev_set_drvdata(dev, ud);
+
+ ud->vp_int = irq_resource_tx->start;
+
+ /*
+ * If we were provided an rx_irq then we need to init the appropriate
+ * queues, locks, and functions.
+ */
+ ud->rx_int = -1;
+ if (irq_resource_rx->start != DEVTREE_IRQ_NONE) {
+ init_waitqueue_head(&ud->waitq);
+ mutex_init(&ud->lock);
+ if (request_irq(ud->rx_int, ubicom32fb_interrupt, IRQF_SHARED, "ubicom32fb_rx", ud)) {
+ dev_err(dev, "Couldn't request rx IRQ\n");
+ rc = -ENOMEM;
+ goto fail;
+ }
+ ud->rx_int = irq_resource_rx->start;
+ }
+
+ /*
+ * Allocate and align the requested amount of VRAM
+ */
+ ud->total_vram_size = (vram_size * 1024) + regs->fb_align;
+ ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
+ if (ud->fb == NULL) {
+ dev_err(dev, "Couldn't allocate VRAM\n");
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ offset = (u32_t)ud->fb & (regs->fb_align - 1);
+ if (!offset) {
+ ud->fb_aligned = ud->fb;
+ } else {
+ offset = regs->fb_align - offset;
+ ud->fb_aligned = ud->fb + offset;
+ }
+
+ /*
+ * Clear the entire frame buffer
+ */
+ if (!init_value) {
+ memset(ud->fb_aligned, 0, vram_size * 1024);
+ } else {
+ unsigned short *p = ud->fb_aligned;
+ int i;
+ for (i = 0; i < ((vram_size * 1024) / sizeof(u16_t)); i++) {
+ *p++ = init_value;
+ }
+ }
+
+ /*
+ * Fill in the fb_var_screeninfo structure
+ */
+ memset(&ubicom32fb_var, 0, sizeof(ubicom32fb_var));
+ ubicom32fb_var.bits_per_pixel = regs->bpp;
+ ubicom32fb_var.red.offset = regs->rshift;
+ ubicom32fb_var.green.offset = regs->gshift;
+ ubicom32fb_var.blue.offset = regs->bshift;
+ ubicom32fb_var.red.length = regs->rbits;
+ ubicom32fb_var.green.length = regs->gbits;
+ ubicom32fb_var.blue.length = regs->bbits;
+ ubicom32fb_var.activate = FB_ACTIVATE_NOW;
+
+#if 0
+ /*
+ * Turn on the display
+ */
+ ud->reg_ctrl_default = REG_CTRL_ENABLE;
+ if (regs->rotate_screen)
+ ud->reg_ctrl_default |= REG_CTRL_ROTATE;
+ ubicom32fb_out_be32(ud, REG_CTRL, ud->reg_ctrl_default);
+#endif
+
+ /*
+ * Fill in the fb_info structure
+ */
+ ud->fbinfo->device = dev;
+ ud->fbinfo->screen_base = (void *)ud->fb_aligned;
+ ud->fbinfo->fbops = &ubicom32fb_ops;
+ ud->fbinfo->fix = ubicom32fb_fix;
+ ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
+ ud->fbinfo->fix.smem_len = fbsize;
+ ud->fbinfo->fix.line_length = regs->xres * (regs->bpp / 8);
+
+ /*
+ * We support panning in the y direction only
+ */
+ ud->fbinfo->fix.xpanstep = 0;
+ ud->fbinfo->fix.ypanstep = 1;
+
+ ud->fbinfo->pseudo_palette = ud->pseudo_palette;
+ ud->fbinfo->flags = FBINFO_DEFAULT;
+ ud->fbinfo->var = ubicom32fb_var;
+ ud->fbinfo->var.xres = regs->xres;
+ ud->fbinfo->var.yres = regs->yres;
+
+ /*
+ * We cannot pan in the X direction, so xres_virtual is regs->xres
+ * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
+ */
+ ud->fbinfo->var.xres_virtual = regs->xres;
+ ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
+
+ //ud->fbinfo->var.height = regs->height_mm;
+ //ud->fbinfo->var.width = regs->width_mm;
+
+ /*
+ * Allocate a color map
+ */
+ rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
+ if (rc) {
+ dev_err(dev, "Fail to allocate colormap (%d entries)\n",
+ PALETTE_ENTRIES_NO);
+ goto fail;
+ }
+ ud->cmap_alloc = true;
+
+ /*
+ * Register new frame buffer
+ */
+ rc = register_framebuffer(ud->fbinfo);
+ if (rc) {
+ dev_err(dev, "Could not register frame buffer\n");
+ goto fail;
+ }
+
+ /*
+ * Start up the VDC
+ */
+ ud->regs->next_frame = ud->fb;
+ ubicom32fb_send_command(ud, VDCTIO_COMMAND_START, 0);
+
+ /*
+ * Tell the log we are here
+ */
+ dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u), regs=%p irqtx=%u irqrx=%u\n",
+ ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
+ ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual, ud->regs,
+ irq_resource_tx->start, irq_resource_rx->start);
+
+ /*
+ * Success
+ */
+ return 0;
+
+fail:
+ ubicom32fb_release(dev);
+ return rc;
+}
+
+/*
+ * ubicom32fb_platform_remove
+ */
+static int ubicom32fb_platform_remove(struct platform_device *pdev)
+{
+ dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
+ return ubicom32fb_release(&pdev->dev);
+}
+
+static struct platform_driver ubicom32fb_platform_driver = {
+ .probe = ubicom32fb_platform_probe,
+ .remove = ubicom32fb_platform_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifndef MODULE
+/*
+ * ubicom32fb_setup
+ * Process kernel boot options
+ */
+static int __init ubicom32fb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options) {
+ return 0;
+ }
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!*this_opt) {
+ continue;
+ }
+
+ if (!strncmp(this_opt, "init_value=", 10)) {
+ init_value = simple_strtoul(this_opt + 11, NULL, 0);
+ continue;
+ }
+
+ if (!strncmp(this_opt, "vram_size=", 10)) {
+ vram_size = simple_strtoul(this_opt + 10, NULL, 0);
+ continue;
+ }
+ }
+ return 0;
+}
+#endif /* MODULE */
+
+/*
+ * ubicom32fb_init
+ */
+static int __devinit ubicom32fb_init(void)
+{
+#ifndef MODULE
+ /*
+ * Get kernel boot options (in 'video=ubicom32fb:<options>')
+ */
+ char *option = NULL;
+
+ if (fb_get_options(DRIVER_NAME, &option)) {
+ return -ENODEV;
+ }
+ ubicom32fb_setup(option);
+#endif /* MODULE */
+
+ return platform_driver_register(&ubicom32fb_platform_driver);
+}
+module_init(ubicom32fb_init);
+
+/*
+ * ubicom32fb_exit
+ */
+static void __exit ubicom32fb_exit(void)
+{
+ platform_driver_unregister(&ubicom32fb_platform_driver);
+}
+module_exit(ubicom32fb_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
--- /dev/null
+++ b/drivers/video/ubicom32vfb.c
@@ -0,0 +1,492 @@
+/*
+ * drivers/video/ubicom32vfb.c
+ * Ubicom32 virtual frame buffer driver
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver was based on skeletonfb.c, Skeleton for a frame buffer device by
+ * Geert Uytterhoeven.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
+
+#define DRIVER_NAME "ubicom32vfb"
+#define DRIVER_DESCRIPTION "Ubicom32 virtual frame buffer driver"
+
+#define PALETTE_ENTRIES_NO 16
+
+/*
+ * Option variables
+ *
+ * vram_size: VRAM size in kilobytes, subject to alignment
+ */
+static int vram_size = 0;
+module_param(vram_size, int, 0);
+MODULE_PARM_DESC(vram_size, "VRAM size, in kilobytes to allocate, should be at least the size of one screen, subject to alignment");
+
+static int xres = 320;
+module_param(xres, int, 0);
+MODULE_PARM_DESC(xres, "x (horizontal) resolution");
+
+static int yres = 240;
+module_param(yres, int, 0);
+MODULE_PARM_DESC(yres, "y (vertical) resolution");
+
+static int bgr = 0;
+module_param(bgr, int, 0);
+MODULE_PARM_DESC(bgr, "display is BGR (Blue is MSB)");
+
+/*
+ * Buffer alignment, must not be 0
+ */
+#define UBICOM32VFB_ALIGNMENT 4
+
+/*
+ * fb_fix_screeninfo defines the non-changeable properties of the VDC, depending on what mode it is in.
+ */
+static struct fb_fix_screeninfo ubicom32vfb_fix = {
+ .id = "Ubicom32",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .accel = FB_ACCEL_NONE
+};
+
+/*
+ * Filled in at probe time when we find out what the hardware supports
+ */
+static struct fb_var_screeninfo ubicom32vfb_var;
+
+/*
+ * Private data structure
+ */
+struct ubicom32vfb_drvdata {
+ struct fb_info *fbinfo;
+ bool cmap_alloc;
+
+ /*
+ * The address of the framebuffer in memory
+ */
+ void *fb;
+ void *fb_aligned;
+
+ /*
+ * Total size of vram including alignment allowance
+ */
+ u32 total_vram_size;
+
+ /*
+ * Fake palette of 16 colors
+ */
+ u32 pseudo_palette[PALETTE_ENTRIES_NO];
+};
+
+/*
+ * ubicom32vfb_pan_display
+ * Pans the display to a given location. Supports only y direction panning.
+ */
+static int ubicom32vfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+ struct ubicom32vfb_drvdata *ud = (struct ubicom32vfb_drvdata *)fbi->par;
+ void *new_addr;
+
+ /*
+ * Get the last y line that would be displayed. Since we don't support YWRAP,
+ * it must be less than our virtual y size.
+ */
+ u32 lasty = var->yoffset + var->yres;
+ if (lasty > fbi->var.yres_virtual) {
+ /*
+ * We would fall off the end of our frame buffer if we panned here.
+ */
+ return -EINVAL;
+ }
+
+ if (var->xoffset) {
+ /*
+ * We don't support panning in the x direction
+ */
+ return -EINVAL;
+ }
+
+ /*
+ * Everything looks sane, go ahead and pan
+ *
+ * We have to calculate a new address for the VDC to look at
+ */
+ new_addr = ud->fb_aligned + (var->yoffset * fbi->fix.line_length);
+
+ return 0;
+}
+
+/*
+ * ubicom32vfb_setcolreg
+ * Sets a color in our virtual palette
+ */
+static int ubicom32vfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
+{
+ u32 *palette = fbi->pseudo_palette;
+
+ if (regno >= PALETTE_ENTRIES_NO) {
+ return -EINVAL;
+ }
+
+ /*
+ * We only use 8 bits from each color
+ */
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ /*
+ * Convert any grayscale values
+ */
+ if (fbi->var.grayscale) {
+ u16 gray = red + green + blue;
+ gray += (gray >> 2) + (gray >> 3) - (gray >> 7);
+ gray >>= 2;
+ if (gray > 255) {
+ gray = 255;
+ }
+ red = gray;
+ blue = gray;
+ green = gray;
+ }
+
+ palette[regno] = (red << fbi->var.red.offset) | (green << fbi->var.green.offset) |
+ (blue << fbi->var.blue.offset);
+
+ return 0;
+}
+
+/*
+ * ubicom32vfb_mmap
+ */
+static int ubicom32vfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct ubicom32vfb_drvdata *drvdata = (struct ubicom32vfb_drvdata *)info->par;
+
+ vma->vm_start = (unsigned long)(drvdata->fb_aligned);
+
+ vma->vm_end = vma->vm_start + info->fix.smem_len;
+
+ /* For those who don't understand how mmap works, go read
+ * Documentation/nommu-mmap.txt.
+ * For those that do, you will know that the VM_MAYSHARE flag
+ * must be set in the vma->vm_flags structure on noMMU
+ * Other flags can be set, and are documented in
+ * include/linux/mm.h
+ */
+
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
+
+ return 0;
+}
+
+static struct fb_ops ubicom32vfb_ops =
+{
+ .owner = THIS_MODULE,
+ .fb_pan_display = ubicom32vfb_pan_display,
+ .fb_setcolreg = ubicom32vfb_setcolreg,
+ .fb_mmap = ubicom32vfb_mmap,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+/*
+ * ubicom32vfb_release
+ */
+static int ubicom32vfb_release(struct device *dev)
+{
+ struct ubicom32vfb_drvdata *ud = dev_get_drvdata(dev);
+
+ unregister_framebuffer(ud->fbinfo);
+
+ if (ud->cmap_alloc) {
+ fb_dealloc_cmap(&ud->fbinfo->cmap);
+ }
+
+ if (ud->fb) {
+ kfree(ud->fb);
+ }
+
+ framebuffer_release(ud->fbinfo);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+/*
+ * ubicom32vfb_platform_probe
+ */
+static int __init ubicom32vfb_platform_probe(struct platform_device *pdev)
+{
+ struct ubicom32vfb_drvdata *ud;
+ struct fb_info *fbinfo;
+ int rc;
+ size_t fbsize;
+ struct device *dev = &pdev->dev;
+ int offset;
+
+ /*
+ * This is the minimum VRAM size
+ */
+ fbsize = xres * yres * 2;
+ if (!vram_size) {
+ vram_size = (fbsize + 1023) / 1024;
+ } else {
+ if (fbsize > (vram_size * 1024)) {
+ dev_err(dev, "Not enough VRAM for display, need >= %u bytes\n", fbsize);
+ return -ENOMEM; // should be ebadparam?
+ }
+ }
+
+ /*
+ * Allocate the framebuffer instance + our private data
+ */
+ fbinfo = framebuffer_alloc(sizeof(struct ubicom32vfb_drvdata), &pdev->dev);
+ if (!fbinfo) {
+ dev_err(dev, "Not enough memory to allocate instance.\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Fill in our private data.
+ */
+ ud = (struct ubicom32vfb_drvdata *)fbinfo->par;
+ ud->fbinfo = fbinfo;
+ dev_set_drvdata(dev, ud);
+
+ /*
+ * Allocate and align the requested amount of VRAM
+ */
+ ud->total_vram_size = (vram_size * 1024) + UBICOM32VFB_ALIGNMENT;
+ ud->fb = kmalloc(ud->total_vram_size, GFP_KERNEL);
+ if (ud->fb == NULL) {
+ dev_err(dev, "Couldn't allocate VRAM\n");
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ offset = (u32_t)ud->fb & (UBICOM32VFB_ALIGNMENT - 1);
+ if (!offset) {
+ ud->fb_aligned = ud->fb;
+ } else {
+ offset = UBICOM32VFB_ALIGNMENT - offset;
+ ud->fb_aligned = ud->fb + offset;
+ }
+
+ /*
+ * Clear the entire frame buffer
+ */
+ memset(ud->fb_aligned, 0, vram_size * 1024);
+
+ /*
+ * Fill in the fb_var_screeninfo structure
+ */
+ memset(&ubicom32vfb_var, 0, sizeof(ubicom32vfb_var));
+ ubicom32vfb_var.bits_per_pixel = 16;
+ ubicom32vfb_var.red.length = 5;
+ ubicom32vfb_var.green.length = 6;
+ ubicom32vfb_var.green.offset = 5;
+ ubicom32vfb_var.blue.length = 5;
+ ubicom32vfb_var.activate = FB_ACTIVATE_NOW;
+
+ if (bgr) {
+ ubicom32vfb_var.red.offset = 0;
+ ubicom32vfb_var.blue.offset = 11;
+ } else {
+ ubicom32vfb_var.red.offset = 11;
+ ubicom32vfb_var.blue.offset = 0;
+ }
+
+ /*
+ * Fill in the fb_info structure
+ */
+ ud->fbinfo->device = dev;
+ ud->fbinfo->screen_base = (void *)ud->fb_aligned;
+ ud->fbinfo->fbops = &ubicom32vfb_ops;
+ ud->fbinfo->fix = ubicom32vfb_fix;
+ ud->fbinfo->fix.smem_start = (u32)ud->fb_aligned;
+ ud->fbinfo->fix.smem_len = fbsize;
+ ud->fbinfo->fix.line_length = xres * 2;
+
+ /*
+ * We support panning in the y direction only
+ */
+ ud->fbinfo->fix.xpanstep = 0;
+ ud->fbinfo->fix.ypanstep = 1;
+
+ ud->fbinfo->pseudo_palette = ud->pseudo_palette;
+ ud->fbinfo->flags = FBINFO_DEFAULT;
+ ud->fbinfo->var = ubicom32vfb_var;
+ ud->fbinfo->var.xres = xres;
+ ud->fbinfo->var.yres = yres;
+
+ /*
+ * We cannot pan in the X direction, so xres_virtual is xres
+ * We can pan in the Y direction, so yres_virtual is vram_size / ud->fbinfo->fix.line_length
+ */
+ ud->fbinfo->var.xres_virtual = xres;
+ ud->fbinfo->var.yres_virtual = (vram_size * 1024) / ud->fbinfo->fix.line_length;
+
+ /*
+ * Allocate a color map
+ */
+ rc = fb_alloc_cmap(&ud->fbinfo->cmap, PALETTE_ENTRIES_NO, 0);
+ if (rc) {
+ dev_err(dev, "Fail to allocate colormap (%d entries)\n",
+ PALETTE_ENTRIES_NO);
+ goto fail;
+ }
+ ud->cmap_alloc = true;
+
+ /*
+ * Register new frame buffer
+ */
+ rc = register_framebuffer(ud->fbinfo);
+ if (rc) {
+ dev_err(dev, "Could not register frame buffer\n");
+ goto fail;
+ }
+
+ /*
+ * Tell the log we are here
+ */
+ dev_info(dev, "fbaddr=%p align=%p, size=%uKB screen(%ux%u) virt(%ux%u)\n",
+ ud->fb, ud->fb_aligned, vram_size, ud->fbinfo->var.xres, ud->fbinfo->var.yres,
+ ud->fbinfo->var.xres_virtual, ud->fbinfo->var.yres_virtual);
+
+ /*
+ * Success
+ */
+ return 0;
+
+fail:
+ ubicom32vfb_release(dev);
+ return rc;
+}
+
+/*
+ * ubicom32vfb_platform_remove
+ */
+static int ubicom32vfb_platform_remove(struct platform_device *pdev)
+{
+ dev_info(&(pdev->dev), "Ubicom32 FB Driver Remove\n");
+ return ubicom32vfb_release(&pdev->dev);
+}
+
+static struct platform_driver ubicom32vfb_platform_driver = {
+ .probe = ubicom32vfb_platform_probe,
+ .remove = ubicom32vfb_platform_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifndef MODULE
+/*
+ * ubicom32vfb_setup
+ * Process kernel boot options
+ */
+static int __init ubicom32vfb_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options) {
+ return 0;
+ }
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!*this_opt) {
+ continue;
+ }
+
+ if (!strncmp(this_opt, "vram_size=", 10)) {
+ vram_size = simple_strtoul(this_opt + 10, NULL, 0);
+ continue;
+ }
+
+ if (!strncmp(this_opt, "bgr=", 4)) {
+ bgr = simple_strtoul(this_opt + 4, NULL, 0);
+ continue;
+ }
+
+ if (!strncmp(this_opt, "xres=", 5)) {
+ xres = simple_strtoul(this_opt + 5, NULL, 0);
+ continue;
+ }
+
+ if (!strncmp(this_opt, "yres=", 5)) {
+ yres = simple_strtoul(this_opt + 5, NULL, 0);
+ continue;
+ }
+ }
+ return 0;
+}
+#endif /* MODULE */
+
+/*
+ * ubicom32vfb_init
+ */
+static int __devinit ubicom32vfb_init(void)
+{
+#ifndef MODULE
+ /*
+ * Get kernel boot options (in 'video=ubicom32vfb:<options>')
+ */
+ char *option = NULL;
+
+ if (fb_get_options(DRIVER_NAME, &option)) {
+ return -ENODEV;
+ }
+ ubicom32vfb_setup(option);
+#endif /* MODULE */
+
+ return platform_driver_register(&ubicom32vfb_platform_driver);
+}
+module_init(ubicom32vfb_init);
+
+/*
+ * ubicom32vfb_exit
+ */
+static void __exit ubicom32vfb_exit(void)
+{
+ platform_driver_unregister(&ubicom32vfb_platform_driver);
+}
+module_exit(ubicom32vfb_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -856,6 +856,19 @@ config WATCHDOG_RIO
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
+# Ubicom32
+
+config UBI32_WDT
+ tristate "Ubicom32 Hardware Watchdog support"
+ depends on UBICOM32
+ ---help---
+ If you say yes here you will get support for the Ubicom32 On-Chip
+ Watchdog Timer. If you have one of these processors and wish to
+ have watchdog support enabled, say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ubi32_wdt.
+
# XTENSA Architecture
#
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -130,6 +130,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
+# Ubicom32 Architecture
+obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
+
# XTENSA Architecture
# Architecture Independant
--- /dev/null
+++ b/drivers/watchdog/ubi32_wdt.c
@@ -0,0 +1,630 @@
+/*
+ * drivers/watchdog/ubi32_wdt.c
+ * Ubicom32 Watchdog Driver
+ *
+ * Originally based on softdog.c
+ * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2007 Michele d'Amico
+ * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/ip5000.h>
+
+#define WATCHDOG_NAME "ubi32-wdt"
+#define PFX WATCHDOG_NAME ": "
+
+#define OSC1_FREQ 12000000
+#define WATCHDOG_SEC_TO_CYC(x) (OSC1_FREQ * (x))
+#define WATCHDOG_MAX_SEC (0xffffffff / OSC1_FREQ)
+
+#define MIN_PROCESSOR_ADDRESS 0x03000000
+
+static DEFINE_SPINLOCK(ubi32_wdt_spinlock);
+
+#define WATCHDOG_TIMEOUT 20
+
+#if defined(CONFIG_WATCHDOG_NOWAYOUT)
+#define WATCHDOG_NOWAYOUT 1
+#else
+#define WATCHDOG_NOWAYOUT 0
+#endif
+
+static unsigned int timeout = WATCHDOG_TIMEOUT;
+static int nowayout = WATCHDOG_NOWAYOUT;
+static struct watchdog_info ubi32_wdt_info;
+static unsigned long open_check;
+static char expect_close;
+
+#if !defined(CONFIG_SMP)
+#define UBI32_WDT_LOCK(lock, flags) local_irq_save(flags)
+#define UBI32_WDT_UNLOCK(lock, flags) local_irq_restore(flags)
+#define UBI32_WDT_LOCK_CHECK()
+#else
+#define UBI32_WDT_LOCK(lock, flags) spin_lock_irqsave((lock), (flags));
+#define UBI32_WDT_UNLOCK(lock, flags) spin_unlock_irqrestore((lock), (flags));
+#define UBI32_WDT_LOCK_CHECK() BUG_ON(!spin_is_locked(&ubi32_wdt_spinlock));
+#endif
+
+/*
+ * ubi32_wdt_remaining()
+ * Return the approximate number of seconds remaining
+ */
+static int ubi32_wdt_remaining(void)
+{
+ int compare;
+ int curr;
+
+ UBI32_WDT_LOCK_CHECK();
+
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
+ compare = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcom);
+ curr = ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
+ return (compare - curr) / OSC1_FREQ;
+
+}
+
+/*
+ * ubi32_wdt_keepalive()
+ * Keep the Userspace Watchdog Alive
+ *
+ * The Userspace watchdog got a KeepAlive: schedule the next timeout.
+ */
+static int ubi32_wdt_keepalive(void)
+{
+ UBI32_WDT_LOCK_CHECK();
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
+ ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
+ + WATCHDOG_SEC_TO_CYC(timeout));
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
+ return 0;
+}
+
+/*
+ * ubi32_wdt_stop()
+ * Stop the on-chip Watchdog
+ */
+static int ubi32_wdt_stop(void)
+{
+ UBI32_WDT_LOCK_CHECK();
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, TIMER_WATCHDOG_DISABLE);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
+ return 0;
+}
+
+/*
+ * ubi32_wdt_start()
+ * Start the on-chip Watchdog
+ */
+static int ubi32_wdt_start(void)
+{
+ UBI32_WDT_LOCK_CHECK();
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcom,
+ ubicom32_read_reg(&UBICOM32_IO_TIMER->mptval)
+ + WATCHDOG_SEC_TO_CYC(timeout));
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->wdcfg, ~TIMER_WATCHDOG_DISABLE);
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
+ return 0;
+}
+
+/*
+ * ubi32_wdt_running()
+ * Return true if the watchdog is configured
+ */
+static int ubi32_wdt_running(void)
+{
+ int enabled;
+
+ UBI32_WDT_LOCK_CHECK();
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, TIMER_TKEYVAL);
+ enabled = ubicom32_read_reg(&UBICOM32_IO_TIMER->wdcfg) == ~TIMER_WATCHDOG_DISABLE;
+ ubicom32_write_reg(&UBICOM32_IO_TIMER->tkey, 0);
+ return enabled;
+}
+
+/*
+ * ubi32_wdt_set_timeout()
+ * Set the Userspace Watchdog timeout
+ *
+ * - @t: new timeout value (in seconds)
+ */
+static int ubi32_wdt_set_timeout(unsigned long t)
+{
+ UBI32_WDT_LOCK_CHECK();
+
+ if (t > WATCHDOG_MAX_SEC) {
+ printk(KERN_WARNING PFX "request to large: %ld [1-%d] sec)\n", t, WATCHDOG_MAX_SEC);
+ return -EINVAL;
+ }
+
+ /*
+ * If we are running, then reset the time value so
+ * that the new value has an immediate effect.
+ */
+ timeout = t;
+ if (ubi32_wdt_running()) {
+ ubi32_wdt_keepalive();
+ }
+ return 0;
+}
+
+/*
+ * ubi32_wdt_open()
+ * Open the Device
+ */
+static int ubi32_wdt_open(struct inode *inode, struct file *file)
+{
+ unsigned long flags;
+
+ if (test_and_set_bit(0, &open_check))
+ return -EBUSY;
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_start();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+
+ return nonseekable_open(inode, file);
+}
+
+/*
+ * ubi32_wdt_close()
+ * Close the Device
+ */
+static int ubi32_wdt_release(struct inode *inode, struct file *file)
+{
+ unsigned long flags;
+
+ /*
+ * If we don't expect a close, then the watchdog continues
+ * even though the device is closed. The caller will have
+ * a full timeout value to reopen the device and continue
+ * stroking it.
+ */
+ if (expect_close != 42) {
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_keepalive();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ } else {
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_stop();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ }
+
+ expect_close = 0;
+ clear_bit(0, &open_check);
+ return 0;
+}
+
+/*
+ * ubi32_wdt_write()
+ * Write to Device
+ *
+ * If the user writes nothing, nothing happens.
+ * If the user writes a V, then we expect a close and allow a release.
+ * If the user writes anything else, it is ignored.
+ */
+static ssize_t ubi32_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ size_t i;
+ unsigned long flags;
+
+ /*
+ * Every write resets the expect_close. The last write
+ * must be a V to allow shutdown on close.
+ */
+ expect_close = 0;
+
+ /*
+ * Empty writes still ping.
+ */
+ if (!len) {
+ goto ping;
+ }
+
+ /*
+ * If nowayout is set, it does not matter if the caller
+ * is trying to send the magic 'V' we will not allow a
+ * close to stop us.
+ */
+ if (nowayout) {
+ goto ping;
+ }
+
+ /*
+ * See if the program wrote a 'V' and if so disable
+ * the watchdog on release.
+ */
+ for (i = 0; i < len; i++) {
+ char c;
+ if (get_user(c, data + i)) {
+ return -EFAULT;
+ }
+
+ if (c == 'V') {
+ expect_close = 42;
+ }
+ }
+
+ping:
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_keepalive();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return len;
+}
+
+/*
+ * ubi32_wdt_ioctl()
+ * Query the watchdog device.
+ *
+ * Query basic information from the device or ping it, as outlined by the
+ * watchdog API.
+ */
+static long ubi32_wdt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &ubi32_wdt_info, sizeof(ubi32_wdt_info))) {
+ return -EFAULT;
+ }
+ return 0;
+
+ case WDIOC_GETSTATUS: {
+ unsigned long flags;
+ int running;
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ running = ubi32_wdt_running();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return running;
+ }
+
+ case WDIOC_GETBOOTSTATUS:
+ return ubicom32_get_reset_reason();
+
+ case WDIOC_SETOPTIONS: {
+ unsigned long flags;
+ int options, ret = -EINVAL;
+
+ /*
+ * The sample application does not pass a pointer
+ * but directly passes a value of 1 or 2; however
+ * all of the implementations (and thus probably
+ * the real applications) pass a pointer to a value.
+ *
+ * It should be noted that WDIOC_SETOPTIONS is defined as
+ * _IOR(WATCHDOG_IOCTL_BASE, 4, int), which means
+ * that it should be an int and NOT a pointer.
+ *
+ * TODO: Examine this code for future chips.
+ * TODO: Report the sample code defect.
+ */
+ if ((int)p < MIN_PROCESSOR_ADDRESS) {
+ options = (int)p;
+ } else {
+ if (get_user(options, p))
+ return -EFAULT;
+ }
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ if (options & WDIOS_DISABLECARD) {
+ ubi32_wdt_stop();
+ ret = 0;
+ }
+ if (options & WDIOS_ENABLECARD) {
+ ubi32_wdt_start();
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return ret;
+ }
+
+ case WDIOC_KEEPALIVE: {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_keepalive();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return 0;
+ }
+
+ case WDIOC_SETTIMEOUT: {
+ int new_timeout;
+ unsigned long flags;
+ int ret = 0;
+
+ if (get_user(new_timeout, p))
+ return -EFAULT;
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ret = ubi32_wdt_set_timeout(new_timeout);
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return ret;
+
+ }
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, p);
+
+ case WDIOC_GETTIMELEFT: {
+ unsigned long flags;
+ int remaining = 0;
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ remaining = ubi32_wdt_remaining();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ return put_user(remaining, p);
+ }
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+/*
+ * ubi32_wdt_notify_sys()
+ * Notification callback function for system events.
+ *
+ * Turn off the watchdog during a SYS_DOWN or SYS_HALT.
+ */
+static int ubi32_wdt_notify_sys(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_stop();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ }
+
+ return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_PM
+static int state_before_suspend;
+
+/*
+ * ubi32_wdt_suspend()
+ * suspend the watchdog
+ *
+ * Remember if the watchdog was running and stop it.
+ */
+static int ubi32_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ state_before_suspend = ubi32_wdt_running();
+ ubi32_wdt_stop();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * ubi32_wdt_resume()
+ * Resume the watchdog
+ *
+ * If the watchdog was running, turn it back on.
+ */
+static int ubi32_wdt_resume(struct platform_device *pdev)
+{
+ if (state_before_suspend) {
+ unsigned long flags;
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ubi32_wdt_set_timeout(timeout);
+ ubi32_wdt_start();
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ }
+
+ return 0;
+}
+#else
+# define ubi32_wdt_suspend NULL
+# define ubi32_wdt_resume NULL
+#endif
+
+static const struct file_operations ubi32_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = ubi32_wdt_write,
+ .unlocked_ioctl = ubi32_wdt_ioctl,
+ .open = ubi32_wdt_open,
+ .release = ubi32_wdt_release,
+};
+
+static struct miscdevice ubi32_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &ubi32_wdt_fops,
+};
+
+static struct watchdog_info ubi32_wdt_info = {
+ .identity = "Ubicom32 Watchdog",
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static struct notifier_block ubi32_wdt_notifier = {
+ .notifier_call = ubi32_wdt_notify_sys,
+};
+
+/*
+ * ubi32_wdt_probe()
+ * Probe/register the watchdog module
+ *
+ * Registers the misc device and notifier handler. Actual device
+ * initialization is handled by ubi32_wdt_open().
+ */
+static int __devinit ubi32_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = register_reboot_notifier(&ubi32_wdt_notifier);
+ if (ret) {
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ ret = misc_register(&ubi32_wdt_miscdev);
+ if (ret) {
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ unregister_reboot_notifier(&ubi32_wdt_notifier);
+ return ret;
+ }
+
+ printk(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+ return 0;
+}
+
+/*
+ * ubi32_wdt_remove()
+ * Uninstall the module
+ *
+ * Unregisters the misc device and notifier handler. Actual device
+ * deinitialization is handled by ubi32_wdt_close().
+ */
+static int __devexit ubi32_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&ubi32_wdt_miscdev);
+ unregister_reboot_notifier(&ubi32_wdt_notifier);
+ return 0;
+}
+
+static struct platform_device *ubi32_wdt_device;
+
+static struct platform_driver ubi32_wdt_driver = {
+ .probe = ubi32_wdt_probe,
+ .remove = __devexit_p(ubi32_wdt_remove),
+ .suspend = ubi32_wdt_suspend,
+ .resume = ubi32_wdt_resume,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*
+ * ubi32_wdt_init()
+ * Initialize the watchdog.
+ *
+ * Checks the module params and registers the platform device & driver.
+ * Real work is in the platform probe function.
+ */
+static int __init ubi32_wdt_init(void)
+{
+ unsigned long flags;
+ int ret;
+
+ /*
+ * Check that the timeout value is within range
+ */
+ spin_lock_irqsave(&ubi32_wdt_spinlock, flags);
+ ret = ubi32_wdt_set_timeout(timeout);
+ spin_unlock_irqrestore(&ubi32_wdt_spinlock, flags);
+ if (ret) {
+ return ret;
+ }
+
+ /*
+ * Since this is an on-chip device and needs no board-specific
+ * resources, we'll handle all the platform device stuff here.
+ */
+ ret = platform_driver_register(&ubi32_wdt_driver);
+ if (ret) {
+ printk(KERN_ERR PFX "unable to register driver\n");
+ return ret;
+ }
+
+ ubi32_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+ if (IS_ERR(ubi32_wdt_device)) {
+ printk(KERN_ERR PFX "unable to register device\n");
+ platform_driver_unregister(&ubi32_wdt_driver);
+ return PTR_ERR(ubi32_wdt_device);
+ }
+
+ return 0;
+}
+
+/*
+ * ubi32_wdt_exit()
+ * Deinitialize module
+ *
+ * Back out the platform device & driver steps. Real work is in the
+ * platform remove function.
+ */
+static void __exit ubi32_wdt_exit(void)
+{
+ platform_device_unregister(ubi32_wdt_device);
+ platform_driver_unregister(&ubi32_wdt_driver);
+}
+
+module_init(ubi32_wdt_init);
+module_exit(ubi32_wdt_exit);
+
+MODULE_AUTHOR("Sol Kavy<sol@ubicom.com>");
+MODULE_DESCRIPTION("Ubicom32 Watchdog Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -54,6 +54,10 @@
#define DBG_FLT(a...)
#endif
+#ifndef ARCH_FLAT_ALIGN
+#define ARCH_FLAT_ALIGN 0
+#endif
+
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
@@ -127,10 +131,10 @@ static unsigned long create_flat_tables(
--sp; put_user((unsigned long) argv, sp);
}
- put_user(argc,--sp);
+ --sp; put_user(argc,sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
- put_user((unsigned long) p, argv++);
+ put_user((unsigned long) p, argv); argv++;
do {
get_user(dummy, p); p++;
} while (dummy);
@@ -425,6 +429,7 @@ static int load_flat_file(struct linux_b
loff_t fpos;
unsigned long start_code, end_code;
int ret;
+ int flush_happened = 0;
hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
inode = bprm->file->f_path.dentry->d_inode;
@@ -510,6 +515,7 @@ static int load_flat_file(struct linux_b
/* OK, This is the point of no return */
set_personality(PER_LINUX_32BIT);
+ flush_happened = 1;
}
/*
@@ -524,6 +530,12 @@ static int load_flat_file(struct linux_b
* it all together.
*/
if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
+
+#ifdef ARCH_FLAT_ALIGN_TEXT
+ printk("Unable to mmap rom with ARCH alignment requirements\n");
+ ret = -ENOEXEC;
+ goto err;
+#endif
/*
* this should give us a ROM ptr, but if it doesn't we don't
* really care
@@ -542,7 +554,7 @@ static int load_flat_file(struct linux_b
goto err;
}
- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
+ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
down_write(&current->mm->mmap_sem);
realdatastart = do_mmap(0, 0, len,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
@@ -565,7 +577,7 @@ static int load_flat_file(struct linux_b
ret = realdatastart;
goto err;
}
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
(int)(data_len + bss_len + stack_len), (int)datapos);
@@ -594,7 +606,11 @@ static int load_flat_file(struct linux_b
} else {
- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
+ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
+#ifdef ARCH_FLAT_ALIGN_TEXT
+ /* Reserve space for the text alignment. */
+ len += ARCH_FLAT_ALIGN;
+#endif
down_write(&current->mm->mmap_sem);
textpos = do_mmap(0, 0, len,
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
@@ -617,11 +633,14 @@ static int load_flat_file(struct linux_b
goto err;
}
+ memp = textpos;
+#ifdef ARCH_FLAT_ALIGN_TEXT
+ textpos = ALIGN(textpos + sizeof(struct flat_hdr), ARCH_FLAT_ALIGN) - sizeof(struct flat_hdr);
+#endif
realdatastart = textpos + ntohl(hdr->data_start);
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
- MAX_SHARED_LIBS * sizeof(unsigned long));
- memp = textpos;
+ ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
#ifdef CONFIG_BINFMT_ZFLAT
/*
@@ -657,7 +676,7 @@ static int load_flat_file(struct linux_b
}
if (result >= (unsigned long)-4096) {
printk("Unable to read code+data+bss, errno %d\n",(int)-result);
- do_munmap(current->mm, textpos, text_len + data_len + extra +
+ do_munmap(current->mm, memp, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long));
ret = result;
goto err;
@@ -670,6 +689,9 @@ static int load_flat_file(struct linux_b
/* The main program needs a little extra setup in the task structure */
start_code = textpos + sizeof (struct flat_hdr);
+#ifdef ARCH_FLAT_ALIGN_TEXT
+ BUG_ON(ALIGN(start_code, ARCH_FLAT_ALIGN) != start_code);
+#endif
end_code = textpos + text_len;
if (id == 0) {
current->mm->start_code = start_code;
@@ -796,6 +818,13 @@ static int load_flat_file(struct linux_b
return 0;
err:
+ if (flush_happened) {
+ /*
+ * The parent process has already started running. We cannot allow the child to return back to user space
+ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
+ */
+ do_exit(SIGTERM);
+ }
return ret;
}
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y
- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
+ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
help
ELF FDPIC binaries are based on ELF, but allow the individual load
segments of a binary to be located in memory independently of each
--- a/include/asm-generic/dma-mapping.h
+++ b/include/asm-generic/dma-mapping.h
@@ -255,7 +255,7 @@ dma_sync_sg_for_device(struct device *de
}
static inline int
-dma_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return 0;
}
--- a/include/linux/elf-em.h
+++ b/include/linux/elf-em.h
@@ -41,6 +41,7 @@
* up with a final number.
*/
#define EM_ALPHA 0x9026
+#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
/* Bogus old v850 magic number, used by old tools. */
#define EM_CYGNUS_V850 0x9080
--- a/include/linux/oprofile.h
+++ b/include/linux/oprofile.h
@@ -100,6 +100,8 @@ void oprofile_add_sample(struct pt_regs
*/
void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
unsigned long event, int is_kernel);
+void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel, int cpu);
/* Use this instead when the PC value is not from the regs. Doesn't
* backtrace. */
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -158,6 +158,9 @@
/* SH-SCI */
#define PORT_SCIFA 83
+/* Ubicom32 */
+#define PORT_UBI32_UARTTIO 84
+
#ifdef __KERNEL__
#include <linux/compiler.h>
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2624,6 +2624,9 @@ static int m_show(struct seq_file *m, vo
/* Used by oprofile and other similar tools. */
seq_printf(m, " 0x%p", mod->module_core);
+#ifdef ARCH_PROC_MODULES_EXTRA
+ ARCH_PROC_MODULES_EXTRA(m, mod);
+#endif
/* Taints info */
if (mod->taints)
seq_printf(m, " %s", module_flags(mod, buf));
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -37,7 +37,7 @@
*/
unsigned long long __attribute__((weak)) sched_clock(void)
{
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
}
static __read_mostly int sched_clock_running;
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -549,7 +549,7 @@ config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
(X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
- AVR32 || SUPERH || BLACKFIN || MN10300)
+ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -34,3 +34,5 @@ obj-$(CONFIG_MIGRATION) += migrate.o
obj-$(CONFIG_SMP) += allocpercpu.o
obj-$(CONFIG_QUICKLIST) += quicklist.o
obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
+
+CFLAGS_slab.o := $(PROFILING) -O2
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -753,6 +753,15 @@ void handle_moddevtable(struct module *m
+ sym->st_value;
}
+ /*
+ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
+ * and 0 size will break do_table since it adjust size to (size - id_size)
+ * this is to make sure st_size fall in range.
+ */
+ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
+ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
+ }
+
if (sym_is(symname, "__mod_pci_device_table"))
do_table(symval, sym->st_size,
sizeof(struct pci_device_id), "pci",
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -80,6 +80,8 @@ source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
+source "sound/ubicom32/Kconfig"
+
endif # SND
menuconfig SOUND_PRIME
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_DMASOUND) += oss/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ ubicom32/
obj-$(CONFIG_SND_AOA) += aoa/
# This one must be compilable even if sound is configured out
--- /dev/null
+++ b/sound/ubicom32/Kconfig
@@ -0,0 +1,36 @@
+# ALSA Ubicom32 drivers
+
+menuconfig SND_UBI32
+ tristate "Ubicom32 sound devices"
+ select SND_PCM
+ default n
+ help
+ Say Y here to include support for audio on the Ubicom32 platform.
+ To compile this driver as a module, say M here: the module will be
+ called snd_ubi32.
+
+if SND_UBI32
+
+config SND_UBI32_AUDIO_GENERIC
+ bool "Generic Codec Support"
+ default n
+ help
+ Generic codecs
+
+comment "I2C Based Codecs"
+
+config SND_UBI32_AUDIO_CS4350
+ bool "Cirrus Logic CS4350 DAC"
+ depends on I2C
+ default n
+ help
+ Support for the Cirrus Logic CS4350 DAC.
+
+config SND_UBI32_AUDIO_CS4384
+ bool "Cirrus Logic CS4384 DAC"
+ depends on I2C
+ default n
+ help
+ Support for the Cirrus Logic CS4384 DAC.
+
+endif #SND_UBI32
--- /dev/null
+++ b/sound/ubicom32/Makefile
@@ -0,0 +1,39 @@
+#
+# sound/ubicom32/Makefile
+# Makefile for ALSA
+#
+# (C) Copyright 2009, Ubicom, Inc.
+#
+# This file is part of the Ubicom32 Linux Kernel Port.
+#
+# The Ubicom32 Linux Kernel Port is free software: you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation, either version 2 of the
+# License, or (at your option) any later version.
+#
+# The Ubicom32 Linux Kernel Port is distributed in the hope that it
+# will be useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the Ubicom32 Linux Kernel Port. If not,
+# see <http://www.gnu.org/licenses/>.
+#
+# Ubicom32 implementation derived from (with many thanks):
+# arch/m68knommu
+# arch/blackfin
+# arch/parisc
+#
+
+CFLAGS_ubi32.o += -O2
+snd-ubi32-pcm-objs := ubi32-pcm.o
+snd-ubi32-generic-objs := ubi32-generic.o
+snd-ubi32-cs4350-objs := ubi32-cs4350.o
+snd-ubi32-cs4384-objs := ubi32-cs4384.o
+
+# Toplevel Module Dependency
+obj-$(CONFIG_SND_UBI32) += snd-ubi32-pcm.o
+obj-$(CONFIG_SND_UBI32_AUDIO_GENERIC) += snd-ubi32-generic.o
+obj-$(CONFIG_SND_UBI32_AUDIO_CS4350) += snd-ubi32-cs4350.o
+obj-$(CONFIG_SND_UBI32_AUDIO_CS4384) += snd-ubi32-cs4384.o
--- /dev/null
+++ b/sound/ubicom32/ubi32-cs4350.c
@@ -0,0 +1,286 @@
+/*
+ * sound/ubicom32/ubi32-cs4350.c
+ * Interface to ubicom32 virtual audio peripheral - using CS4350 DAC
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include "ubi32.h"
+
+#define DRIVER_NAME "snd-ubi32-cs4350"
+
+/*
+ * Module properties
+ */
+static const struct i2c_device_id snd_ubi32_cs4350_id[] = {
+ {"cs4350", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+
+/*
+ * snd_ubi32_cs4350_free
+ * Card private data free function
+ */
+void snd_ubi32_cs4350_free(struct snd_card *card)
+{
+ //struct ubi32_snd_priv *ubi32_priv = card->private_data;
+
+ /*
+ * Free all the fields in the snd_ubi32_priv struct
+ */
+ // Nothing to free at this time because ubi32_priv just maintains pointers
+}
+
+/*
+ * snd_ubi32_cs4350_dac_init
+ */
+static int snd_ubi32_cs4350_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int ret;
+ char send[2];
+ char recv[8];
+
+ /*
+ * Initialize the CS4350 DAC over the I2C interface
+ */
+ snd_printk(KERN_INFO "Initializing CS4350 DAC\n");
+
+ /*
+ * Register 0x01: device/revid
+ */
+ send[0] = 0x01;
+ ret = i2c_master_send(client, send, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed 1st attempt to write to CS4350 register 0x01\n");
+ goto fail;
+ }
+ ret = i2c_master_recv(client, recv, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed initial read of CS4350 registers\n");
+ goto fail;
+ }
+ snd_printk(KERN_INFO "CS4350 DAC Device/Rev: %08x\n", recv[0]);
+
+ /*
+ * Register 0x02: Mode control
+ * I2S DIF[2:0] = 001, no De-Emphasis, Auto speed mode
+ */
+ send[0] = 0x02;
+ send[1] = 0x10;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set CS4350 to I2S mode\n");
+ goto fail;
+ }
+
+ /*
+ * Register 0x05/0x06: Volume control
+ * Channel A volume set to -16 dB
+ * Channel B volume set to -16 dB
+ */
+ send[0] = 0x05;
+ send[1] = 0x00;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
+ goto fail;
+ }
+
+ send[0] = 0x06;
+ send[1] = 0x00;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set channel A volume on CS4350\n");
+ goto fail;
+ }
+
+ /*
+ * Make sure the changes took place, this helps verify we are talking to
+ * the correct chip.
+ */
+ send[0] = 0x81;
+ ret = i2c_master_send(client, send, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed to initiate readback\n");
+ goto fail;
+ }
+
+ ret = i2c_master_recv(client, recv, 8);
+ if (ret != 8) {
+ snd_printk(KERN_ERR "Failed second read of CS4350 registers\n");
+ goto fail;
+ }
+
+ if ((recv[1] != 0x10) || (recv[4] != 0x00) || (recv[5] != 0x00)) {
+ snd_printk(KERN_ERR "Failed to initialize CS4350 DAC\n");
+ goto fail;
+ }
+
+ snd_printk(KERN_INFO "CS4350 DAC Initialized\n");
+ return 0;
+
+fail:
+ return -ENODEV;
+}
+
+/*
+ * snd_ubi32_cs4350_i2c_probe
+ */
+static int snd_ubi32_cs4350_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+ int err, ret;
+ struct platform_device *pdev;
+
+ pdev = client->dev.platform_data;
+ if (!pdev) {
+ return -ENODEV;
+ }
+
+ /*
+ * Initialize the CS4350 DAC
+ */
+ ret = snd_ubi32_cs4350_dac_init(client, id);
+ if (ret < 0) {
+ /*
+ * Initialization failed. Propagate the error.
+ */
+ return ret;
+ }
+
+ /*
+ * Create a snd_card structure
+ */
+ card = snd_card_new(index, "Ubi32-CS4350", THIS_MODULE, sizeof(struct ubi32_snd_priv));
+ if (card == NULL) {
+ return -ENOMEM;
+ }
+
+ card->private_free = snd_ubi32_cs4350_free; /* Not sure if correct */
+ ubi32_priv = card->private_data;
+
+ /*
+ * CS4350 DAC has a minimum sample rate of 30khz and an
+ * upper limit of 216khz for it's auto-detect.
+ */
+ ubi32_priv->min_sample_rate = 30000;
+ ubi32_priv->max_sample_rate = 216000;
+
+ /*
+ * Initialize the snd_card's private data structure
+ */
+ ubi32_priv->card = card;
+
+ /*
+ * Create the new PCM instance
+ */
+ err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
+ if (err < 0) {
+ snd_card_free(card);
+ return err; /* What is err? Need to include correct file */
+ }
+
+ strcpy(card->driver, "Ubi32-CS4350");
+ strcpy(card->shortname, "Ubi32-CS4350");
+ sprintf(card->longname, "%s at sendirq=%d recvirq=%d", card->shortname, ubi32_priv->tx_irq, ubi32_priv->rx_irq);
+
+ snd_card_set_dev(card, &client->dev);
+
+ /*
+ * Register the sound card
+ */
+ if ((err = snd_card_register(card)) != 0) {
+ snd_printk(KERN_INFO "snd_card_register error\n");
+ }
+
+ /*
+ * Store card for access from other methods
+ */
+ i2c_set_clientdata(client, card);
+
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4350_i2c_remove
+ */
+static int __devexit snd_ubi32_cs4350_i2c_remove(struct i2c_client *client)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+
+ card = i2c_get_clientdata(client);
+
+ ubi32_priv = card->private_data;
+ snd_ubi32_pcm_remove(ubi32_priv);
+
+ snd_card_free(i2c_get_clientdata(client));
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+/*
+ * I2C driver description
+ */
+static struct i2c_driver snd_ubi32_cs4350_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .id_table = snd_ubi32_cs4350_id,
+ .probe = snd_ubi32_cs4350_i2c_probe,
+ .remove = __devexit_p(snd_ubi32_cs4350_i2c_remove),
+};
+
+/*
+ * Driver init
+ */
+static int __init snd_ubi32_cs4350_init(void)
+{
+ return i2c_add_driver(&snd_ubi32_cs4350_driver);
+}
+module_init(snd_ubi32_cs4350_init);
+
+/*
+ * snd_ubi32_cs4350_exit
+ */
+static void __exit snd_ubi32_cs4350_exit(void)
+{
+ i2c_del_driver(&snd_ubi32_cs4350_driver);
+}
+module_exit(snd_ubi32_cs4350_exit);
+
+/*
+ * Module properties
+ */
+MODULE_ALIAS("i2c:" DRIVER_NAME);
+MODULE_AUTHOR("Patrick Tjin");
+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4350");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/sound/ubicom32/ubi32-cs4384.c
@@ -0,0 +1,982 @@
+/*
+ * sound/ubicom32/ubi32-cs4384.c
+ * Interface to ubicom32 virtual audio peripheral - using CS4384 DAC
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <asm/ip5000.h>
+#include <asm/gpio.h>
+#include <asm/audio_tio.h>
+#include <asm/ubi32-cs4384.h>
+#include "ubi32.h"
+
+#define DRIVER_NAME "snd-ubi32-cs4384"
+
+/*
+ * Module properties
+ */
+static const struct i2c_device_id snd_ubi32_cs4384_id[] = {
+ {"cs4384", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ubicom32audio_id);
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+
+/*
+ * Mixer properties
+ */
+enum {
+ /*
+ * Be careful of changing the order of these IDs, they
+ * are used to index the volume array.
+ */
+ SND_UBI32_CS4384_FRONT_ID,
+ SND_UBI32_CS4384_SURROUND_ID,
+ SND_UBI32_CS4384_CENTER_ID,
+ SND_UBI32_CS4384_LFE_ID,
+ SND_UBI32_CS4384_REAR_ID,
+
+ /*
+ * This should be the last ID
+ */
+ SND_UBI32_CS4384_LAST_ID,
+};
+static const u8_t snd_ubi32_cs4384_ch_ofs[] = {0, 2, 4, 5, 6};
+
+static const DECLARE_TLV_DB_SCALE(snd_ubi32_cs4384_db, -12750, 50, 0);
+
+#define snd_ubi32_cs4384_info_mute snd_ctl_boolean_stereo_info
+#define snd_ubi32_cs4384_info_mute_mono snd_ctl_boolean_mono_info
+
+/*
+ * Mixer controls
+ */
+static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo);
+static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
+static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
+static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
+static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
+
+/*
+ * Make sure to update these if the structure below is changed
+ */
+#define SND_UBI32_MUTE_CTL_START 5
+#define SND_UBI32_MUTE_CTL_END 9
+static struct snd_kcontrol_new snd_ubi32_cs4384_controls[] __devinitdata = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Front Playback Volume",
+ .info = snd_ubi32_cs4384_info_volume,
+ .get = snd_ubi32_cs4384_get_volume,
+ .put = snd_ubi32_cs4384_put_volume,
+ .private_value = SND_UBI32_CS4384_FRONT_ID,
+ .tlv = {
+ .p = snd_ubi32_cs4384_db,
+ },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Surround Playback Volume",
+ .info = snd_ubi32_cs4384_info_volume,
+ .get = snd_ubi32_cs4384_get_volume,
+ .put = snd_ubi32_cs4384_put_volume,
+ .private_value = SND_UBI32_CS4384_SURROUND_ID,
+ .tlv = {
+ .p = snd_ubi32_cs4384_db,
+ },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Center Playback Volume",
+ .info = snd_ubi32_cs4384_info_volume,
+ .get = snd_ubi32_cs4384_get_volume,
+ .put = snd_ubi32_cs4384_put_volume,
+ .private_value = SND_UBI32_CS4384_CENTER_ID,
+ .tlv = {
+ .p = snd_ubi32_cs4384_db,
+ },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "LFE Playback Volume",
+ .info = snd_ubi32_cs4384_info_volume,
+ .get = snd_ubi32_cs4384_get_volume,
+ .put = snd_ubi32_cs4384_put_volume,
+ .private_value = SND_UBI32_CS4384_LFE_ID,
+ .tlv = {
+ .p = snd_ubi32_cs4384_db,
+ },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Rear Playback Volume",
+ .info = snd_ubi32_cs4384_info_volume,
+ .get = snd_ubi32_cs4384_get_volume,
+ .put = snd_ubi32_cs4384_put_volume,
+ .private_value = SND_UBI32_CS4384_REAR_ID,
+ .tlv = {
+ .p = snd_ubi32_cs4384_db,
+ },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Front Playback Switch",
+ .info = snd_ubi32_cs4384_info_mute,
+ .get = snd_ubi32_cs4384_get_mute,
+ .put = snd_ubi32_cs4384_put_mute,
+ .private_value = SND_UBI32_CS4384_FRONT_ID,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Surround Playback Switch",
+ .info = snd_ubi32_cs4384_info_mute,
+ .get = snd_ubi32_cs4384_get_mute,
+ .put = snd_ubi32_cs4384_put_mute,
+ .private_value = SND_UBI32_CS4384_SURROUND_ID,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Center Playback Switch",
+ .info = snd_ubi32_cs4384_info_mute_mono,
+ .get = snd_ubi32_cs4384_get_mute,
+ .put = snd_ubi32_cs4384_put_mute,
+ .private_value = SND_UBI32_CS4384_CENTER_ID,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "LFE Playback Switch",
+ .info = snd_ubi32_cs4384_info_mute_mono,
+ .get = snd_ubi32_cs4384_get_mute,
+ .put = snd_ubi32_cs4384_put_mute,
+ .private_value = SND_UBI32_CS4384_LFE_ID,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "Rear Playback Switch",
+ .info = snd_ubi32_cs4384_info_mute,
+ .get = snd_ubi32_cs4384_get_mute,
+ .put = snd_ubi32_cs4384_put_mute,
+ .private_value = SND_UBI32_CS4384_REAR_ID,
+ },
+};
+
+/*
+ * Our private data
+ */
+struct snd_ubi32_cs4384_priv {
+ /*
+ * Array of current volumes
+ * (L, R, SL, SR, C, LFE, RL, RR)
+ */
+ uint8_t volume[8];
+
+ /*
+ * Bitmask of mutes
+ * MSB (RR, RL, LFE, C, SR, SL, R, L) LSB
+ */
+ uint8_t mute;
+
+ /*
+ * Array of controls
+ */
+ struct snd_kcontrol *kctls[ARRAY_SIZE(snd_ubi32_cs4384_controls)];
+
+ /*
+ * Lock to protect our card
+ */
+ spinlock_t lock;
+};
+
+/*
+ * snd_ubi32_cs4384_info_volume
+ */
+static int snd_ubi32_cs4384_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+{
+ unsigned int id = (unsigned int)kcontrol->private_value;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
+ (id != SND_UBI32_CS4384_CENTER_ID)) {
+ uinfo->count = 2;
+ }
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 255;
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_get_volume
+ */
+static int snd_ubi32_cs4384_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ unsigned int id = (unsigned int)kcontrol->private_value;
+ int ch = snd_ubi32_cs4384_ch_ofs[id];
+ unsigned long flags;
+
+ if (id >= SND_UBI32_CS4384_LAST_ID) {
+ return -EINVAL;
+ }
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+
+ spin_lock_irqsave(&cs4384_priv->lock, flags);
+
+ ucontrol->value.integer.value[0] = cs4384_priv->volume[ch];
+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
+ (id != SND_UBI32_CS4384_CENTER_ID)) {
+ ch++;
+ ucontrol->value.integer.value[1] = cs4384_priv->volume[ch];
+ }
+
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_put_volume
+ */
+static int snd_ubi32_cs4384_put_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
+ struct i2c_client *client = (struct i2c_client *)priv->client;
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ unsigned int id = (unsigned int)kcontrol->private_value;
+ int ch = snd_ubi32_cs4384_ch_ofs[id];
+ unsigned long flags;
+ unsigned char send[3];
+ int nch;
+ int ret = -EINVAL;
+
+ if (id >= SND_UBI32_CS4384_LAST_ID) {
+ return -EINVAL;
+ }
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+
+ spin_lock_irqsave(&cs4384_priv->lock, flags);
+
+ send[0] = 0;
+ switch (id) {
+ case SND_UBI32_CS4384_REAR_ID:
+ send[0] = 0x06;
+
+ /*
+ * Fall through
+ */
+
+ case SND_UBI32_CS4384_SURROUND_ID:
+ send[0] += 0x03;
+
+ /*
+ * Fall through
+ */
+
+ case SND_UBI32_CS4384_FRONT_ID:
+ send[0] += 0x8B;
+ nch = 2;
+ send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
+ send[2] = 255 - (ucontrol->value.integer.value[1] & 0xFF);
+ cs4384_priv->volume[ch++] = send[1];
+ cs4384_priv->volume[ch] = send[2];
+ break;
+
+ case SND_UBI32_CS4384_LFE_ID:
+ send[0] = 0x81;
+
+ /*
+ * Fall through
+ */
+
+ case SND_UBI32_CS4384_CENTER_ID:
+ send[0] += 0x11;
+ nch = 1;
+ send[1] = 255 - (ucontrol->value.integer.value[0] & 0xFF);
+ cs4384_priv->volume[ch] = send[1];
+ break;
+
+ default:
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+ goto done;
+
+ }
+
+ /*
+ * Send the volume to the chip
+ */
+ nch++;
+ ret = i2c_master_send(client, send, nch);
+ if (ret != nch) {
+ snd_printk(KERN_ERR "Failed to set volume on CS4384\n");
+ }
+
+done:
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+
+ return ret;
+}
+
+/*
+ * snd_ubi32_cs4384_get_mute
+ */
+static int snd_ubi32_cs4384_get_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ unsigned int id = (unsigned int)kcontrol->private_value;
+ int ch = snd_ubi32_cs4384_ch_ofs[id];
+ unsigned long flags;
+
+ if (id >= SND_UBI32_CS4384_LAST_ID) {
+ return -EINVAL;
+ }
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+
+ spin_lock_irqsave(&cs4384_priv->lock, flags);
+
+ ucontrol->value.integer.value[0] = !(cs4384_priv->mute & (1 << ch));
+
+ if ((id != SND_UBI32_CS4384_LFE_ID) &&
+ (id != SND_UBI32_CS4384_CENTER_ID)) {
+ ch++;
+ ucontrol->value.integer.value[1] = !(cs4384_priv->mute & (1 << ch));
+ }
+
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_put_mute
+ */
+static int snd_ubi32_cs4384_put_mute(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct ubi32_snd_priv *priv = snd_kcontrol_chip(kcontrol);
+ struct i2c_client *client = (struct i2c_client *)priv->client;
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ unsigned int id = (unsigned int)kcontrol->private_value;
+ int ch = snd_ubi32_cs4384_ch_ofs[id];
+ unsigned long flags;
+ unsigned char send[2];
+ int ret = -EINVAL;
+
+ if (id >= SND_UBI32_CS4384_LAST_ID) {
+ return -EINVAL;
+ }
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+
+ spin_lock_irqsave(&cs4384_priv->lock, flags);
+
+ if (ucontrol->value.integer.value[0]) {
+ cs4384_priv->mute &= ~(1 << ch);
+ } else {
+ cs4384_priv->mute |= (1 << ch);
+ }
+
+ if ((id != SND_UBI32_CS4384_LFE_ID) && (id != SND_UBI32_CS4384_CENTER_ID)) {
+ ch++;
+ if (ucontrol->value.integer.value[1]) {
+ cs4384_priv->mute &= ~(1 << ch);
+ } else {
+ cs4384_priv->mute |= (1 << ch);
+ }
+ }
+
+ /*
+ * Update the chip's mute reigster
+ */
+ send[0] = 0x09;
+ send[1] = cs4384_priv->mute;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set mute on CS4384\n");
+ }
+
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+
+ return ret;
+}
+
+/*
+ * snd_ubi32_cs4384_mixer
+ * Setup the mixer controls
+ */
+static int __devinit snd_ubi32_cs4384_mixer(struct ubi32_snd_priv *priv)
+{
+ struct snd_card *card = priv->card;
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ int i;
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+ for (i = 0; i < ARRAY_SIZE(snd_ubi32_cs4384_controls); i++) {
+ int err;
+
+ cs4384_priv->kctls[i] = snd_ctl_new1(&snd_ubi32_cs4384_controls[i], priv);
+ err = snd_ctl_add(card, cs4384_priv->kctls[i]);
+ if (err) {
+ snd_printk(KERN_WARNING "Failed to add control %d\n", i);
+ return err;
+ }
+ }
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_free
+ * Card private data free function
+ */
+void snd_ubi32_cs4384_free(struct snd_card *card)
+{
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ struct ubi32_snd_priv *ubi32_priv;
+
+ ubi32_priv = card->private_data;
+ cs4384_priv = snd_ubi32_priv_get_drv(ubi32_priv);
+ if (cs4384_priv) {
+ kfree(cs4384_priv);
+ }
+}
+
+/*
+ * snd_ubi32_cs4384_setup_mclk
+ */
+static int snd_ubi32_cs4384_setup_mclk(struct ubi32_cs4384_platform_data *pdata)
+{
+ struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
+ struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
+ struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
+ unsigned int ctl0;
+ unsigned int ctlx;
+ unsigned int div;
+
+ div = pdata->mclk_entries[0].div;
+
+ ctl0 = (1 << 13);
+ ctlx = ((div - 1) << 16) | (div / 2);
+
+ switch (pdata->mclk_src) {
+ case UBI32_CS4384_MCLK_PWM_0:
+ ioc->function |= 2;
+ ioc->ctl0 |= ctl0;
+ ioc->ctl1 = ctlx;
+ return 0;
+
+ case UBI32_CS4384_MCLK_PWM_1:
+ ioc->function |= 2;
+ ioc->ctl0 |= ctl0 << 16;
+ ioc->ctl2 = ctlx;
+ return 0;
+
+ case UBI32_CS4384_MCLK_PWM_2:
+ ioh->ctl0 |= ctl0;
+ ioh->ctl1 = ctlx;
+ return 0;
+
+ case UBI32_CS4384_MCLK_CLKDIV_1:
+ ioa->gpio_mask &= (1 << 7);
+ ioa->ctl1 &= ~(0x7F << 14);
+ ioa->ctl1 |= ((div - 1) << 14);
+ return 0;
+
+ case UBI32_CS4384_MCLK_OTHER:
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * snd_ubi32_cs4384_set_rate
+ */
+static int snd_ubi32_cs4384_set_rate(struct ubi32_snd_priv *priv, int rate)
+{
+ struct ubi32_cs4384_platform_data *cpd = priv->pdata->priv_data;
+ struct ubicom32_io_port *ioa = (struct ubicom32_io_port *)RA;
+ struct ubicom32_io_port *ioc = (struct ubicom32_io_port *)RC;
+ struct ubicom32_io_port *ioh = (struct ubicom32_io_port *)RH;
+ unsigned int ctl;
+ unsigned int div = 0;
+ const u16_t mult[] = {64, 96, 128, 192, 256, 384, 512, 768, 1024};
+ int i;
+ int j;
+
+
+ for (i = 0; i < sizeof(mult) / sizeof(u16_t); i++) {
+ for (j = 0; j < cpd->n_mclk; j++) {
+ if (((unsigned int)rate * (unsigned int)mult[i]) ==
+ cpd->mclk_entries[j].rate) {
+ div = cpd->mclk_entries[j].div;
+ break;
+ }
+ }
+ }
+
+ ctl = ((div - 1) << 16) | (div / 2);
+
+ switch (cpd->mclk_src) {
+ case UBI32_CS4384_MCLK_PWM_0:
+ ioc->ctl1 = ctl;
+ return 0;
+
+ case UBI32_CS4384_MCLK_PWM_1:
+ ioc->ctl2 = ctl;
+ return 0;
+
+ case UBI32_CS4384_MCLK_PWM_2:
+ ioh->ctl1 = ctl;
+ return 0;
+
+ case UBI32_CS4384_MCLK_CLKDIV_1:
+ ioa->ctl1 &= ~(0x7F << 14);
+ ioa->ctl1 |= ((div - 1) << 14);
+ return 0;
+
+ case UBI32_CS4384_MCLK_OTHER:
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * snd_ubi32_cs4384_set_channels
+ * Mute unused channels
+ */
+static int snd_ubi32_cs4384_set_channels(struct ubi32_snd_priv *priv, int channels)
+{
+ struct i2c_client *client = (struct i2c_client *)priv->client;
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+ unsigned char send[2];
+ int ret;
+ int i;
+ unsigned long flags;
+
+ /*
+ * Only support 0, 2, 4, 6, 8 channels
+ */
+ if ((channels > 8) || (channels & 1)) {
+ return -EINVAL;
+ }
+
+ cs4384_priv = snd_ubi32_priv_get_drv(priv);
+ spin_lock_irqsave(&cs4384_priv->lock, flags);
+
+ /*
+ * Address 09h, Mute control
+ */
+ send[0] = 0x09;
+ send[1] = (unsigned char)(0xFF << channels);
+
+ ret = i2c_master_send(client, send, 2);
+
+ spin_unlock_irqrestore(&cs4384_priv->lock, flags);
+
+ /*
+ * Notify the system that we changed the mutes
+ */
+ cs4384_priv->mute = (unsigned char)(0xFF << channels);
+
+ for (i = SND_UBI32_MUTE_CTL_START; i < SND_UBI32_MUTE_CTL_END; i++) {
+ snd_ctl_notify(priv->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &cs4384_priv->kctls[i]->id);
+ }
+
+ if (ret != 2) {
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_dac_init
+ */
+static int snd_ubi32_cs4384_dac_init(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int ret;
+ unsigned char send[2];
+ unsigned char recv[2];
+
+ /*
+ * Initialize the CS4384 DAC over the I2C interface
+ */
+ snd_printk(KERN_INFO "Initializing CS4384 DAC\n");
+
+ /*
+ * Register 0x01: device/revid
+ */
+ send[0] = 0x01;
+ ret = i2c_master_send(client, send, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed 1st attempt to write to CS4384 register 0x01\n");
+ goto fail;
+ }
+ ret = i2c_master_recv(client, recv, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed initial read of CS4384 registers\n");
+ goto fail;
+ }
+ snd_printk(KERN_INFO "CS4384 DAC Device/Rev: %08x\n", recv[0]);
+
+ /*
+ * Register 0x02: Mode Control 1
+ * Control Port Enable, PCM, All DACs enabled, Power Down
+ */
+ send[0] = 0x02;
+ send[1] = 0x81;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
+ goto fail;
+ }
+
+ /*
+ * Register 0x08: Ramp and Mute
+ * RMP_UP, RMP_DN, PAMUTE, DAMUTE
+ */
+ send[0] = 0x08;
+ send[1] = 0xBC;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set CPEN CS4384\n");
+ goto fail;
+ }
+
+ /*
+ * Register 0x03: PCM Control
+ * I2S DIF[3:0] = 0001, no De-Emphasis, Auto speed mode
+ */
+ send[0] = 0x03;
+ send[1] = 0x13;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to set CS4384 to I2S mode\n");
+ goto fail;
+ }
+
+ /*
+ * Register 0x0B/0x0C: Volume control A1/B1
+ * Register 0x0E/0x0F: Volume control A2/B2
+ * Register 0x11/0x12: Volume control A3/B3
+ * Register 0x14/0x15: Volume control A4/B4
+ */
+ send[0] = 0x80 | 0x0B;
+ send[1] = 0x00;
+ send[2] = 0x00;
+ ret = i2c_master_send(client, send, 3);
+ if (ret != 3) {
+ snd_printk(KERN_ERR "Failed to set ch1 volume on CS4384\n");
+ goto fail;
+ }
+
+ send[0] = 0x80 | 0x0E;
+ send[1] = 0x00;
+ send[2] = 0x00;
+ ret = i2c_master_send(client, send, 3);
+ if (ret != 3) {
+ snd_printk(KERN_ERR "Failed to set ch2 volume on CS4384\n");
+ goto fail;
+ }
+
+ send[0] = 0x80 | 0x11;
+ send[1] = 0x00;
+ send[2] = 0x00;
+ ret = i2c_master_send(client, send, 3);
+ if (ret != 3) {
+ snd_printk(KERN_ERR "Failed to set ch3 volume on CS4384\n");
+ goto fail;
+ }
+
+ send[0] = 0x80 | 0x14;
+ send[1] = 0x00;
+ send[2] = 0x00;
+ ret = i2c_master_send(client, send, 3);
+ if (ret != 3) {
+ snd_printk(KERN_ERR "Failed to set ch4 volume on CS4384\n");
+ goto fail;
+ }
+
+ /*
+ * Register 09h: Mute control
+ * Mute all (we will unmute channels as needed)
+ */
+ send[0] = 0x09;
+ send[1] = 0xFF;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to power up CS4384\n");
+ goto fail;
+ }
+
+ /*
+ * Register 0x02: Mode Control 1
+ * Control Port Enable, PCM, All DACs enabled, Power Up
+ */
+ send[0] = 0x02;
+ send[1] = 0x80;
+ ret = i2c_master_send(client, send, 2);
+ if (ret != 2) {
+ snd_printk(KERN_ERR "Failed to power up CS4384\n");
+ goto fail;
+ }
+
+ /*
+ * Make sure the changes took place, this helps verify we are talking to
+ * the correct chip.
+ */
+ send[0] = 0x80 | 0x03;
+ ret = i2c_master_send(client, send, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed to initiate readback\n");
+ goto fail;
+ }
+
+ ret = i2c_master_recv(client, recv, 1);
+ if (ret != 1) {
+ snd_printk(KERN_ERR "Failed second read of CS4384 registers\n");
+ goto fail;
+ }
+
+ if (recv[0] != 0x13) {
+ snd_printk(KERN_ERR "Failed to initialize CS4384 DAC\n");
+ goto fail;
+ }
+
+ snd_printk(KERN_INFO "CS4384 DAC Initialized\n");
+ return 0;
+
+fail:
+ return -ENODEV;
+}
+
+/*
+ * snd_ubi32_cs4384_i2c_probe
+ */
+static int snd_ubi32_cs4384_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+ int err, ret;
+ struct platform_device *pdev;
+ struct ubi32_cs4384_platform_data *pdata;
+ struct snd_ubi32_cs4384_priv *cs4384_priv;
+
+ /*
+ * pdev is audio_tio
+ */
+ pdev = client->dev.platform_data;
+ if (!pdev) {
+ return -ENODEV;
+ }
+
+ /*
+ * pdev->dev.platform_data is ubi32-pcm platform_data
+ */
+ pdata = audio_tio_priv(pdev);
+ if (!pdata) {
+ return -ENODEV;
+ }
+
+ /*
+ * Initialize the CS4384 DAC
+ */
+ ret = snd_ubi32_cs4384_dac_init(client, id);
+ if (ret < 0) {
+ /*
+ * Initialization failed. Propagate the error.
+ */
+ return ret;
+ }
+
+ if (snd_ubi32_cs4384_setup_mclk(pdata)) {
+ return -EINVAL;
+ }
+
+ /*
+ * Create a snd_card structure
+ */
+ card = snd_card_new(index, "Ubi32-CS4384", THIS_MODULE, sizeof(struct ubi32_snd_priv));
+ if (card == NULL) {
+ return -ENOMEM;
+ }
+
+ card->private_free = snd_ubi32_cs4384_free;
+ ubi32_priv = card->private_data;
+
+ /*
+ * Initialize the snd_card's private data structure
+ */
+ ubi32_priv->card = card;
+ ubi32_priv->client = client;
+ ubi32_priv->set_channels = snd_ubi32_cs4384_set_channels;
+ ubi32_priv->set_rate = snd_ubi32_cs4384_set_rate;
+
+ /*
+ * CS4384 DAC has a minimum sample rate of 4khz and an
+ * upper limit of 216khz for it's auto-detect.
+ */
+ ubi32_priv->min_sample_rate = 4000;
+ ubi32_priv->max_sample_rate = 216000;
+
+ /*
+ * Create our private data (to manage volume, etc)
+ */
+ cs4384_priv = kzalloc(sizeof(struct snd_ubi32_cs4384_priv), GFP_KERNEL);
+ if (!cs4384_priv) {
+ snd_card_free(card);
+ return -ENOMEM;
+ }
+ snd_ubi32_priv_set_drv(ubi32_priv, cs4384_priv);
+ spin_lock_init(&cs4384_priv->lock);
+
+ /*
+ * We start off all muted and max volume
+ */
+ cs4384_priv->mute = 0xFF;
+ memset(cs4384_priv->volume, 0xFF, 8);
+
+ /*
+ * Create the new PCM instance
+ */
+ err = snd_ubi32_pcm_probe(ubi32_priv, pdev);
+ if (err < 0) {
+ snd_card_free(card);
+ return err; /* What is err? Need to include correct file */
+ }
+
+ strcpy(card->driver, "Ubi32-CS4384");
+ strcpy(card->shortname, "Ubi32-CS4384");
+ sprintf(card->longname, "%s at sendirq=%d recvirq=%d", card->shortname, ubi32_priv->tx_irq, ubi32_priv->rx_irq);
+
+ snd_card_set_dev(card, &client->dev);
+
+ /*
+ * Set up the mixer
+ */
+ snd_ubi32_cs4384_mixer(ubi32_priv);
+
+ /*
+ * Register the sound card
+ */
+ if ((err = snd_card_register(card)) != 0) {
+ snd_printk(KERN_INFO "snd_card_register error\n");
+ }
+
+ /*
+ * Store card for access from other methods
+ */
+ i2c_set_clientdata(client, card);
+
+ return 0;
+}
+
+/*
+ * snd_ubi32_cs4384_i2c_remove
+ */
+static int __devexit snd_ubi32_cs4384_i2c_remove(struct i2c_client *client)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+
+ card = i2c_get_clientdata(client);
+
+ ubi32_priv = card->private_data;
+ snd_ubi32_pcm_remove(ubi32_priv);
+
+ snd_card_free(i2c_get_clientdata(client));
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+/*
+ * I2C driver description
+ */
+static struct i2c_driver snd_ubi32_cs4384_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .id_table = snd_ubi32_cs4384_id,
+ .probe = snd_ubi32_cs4384_i2c_probe,
+ .remove = __devexit_p(snd_ubi32_cs4384_i2c_remove),
+};
+
+/*
+ * Driver init
+ */
+static int __init snd_ubi32_cs4384_init(void)
+{
+ return i2c_add_driver(&snd_ubi32_cs4384_driver);
+}
+module_init(snd_ubi32_cs4384_init);
+
+/*
+ * snd_ubi32_cs4384_exit
+ */
+static void __exit snd_ubi32_cs4384_exit(void)
+{
+ i2c_del_driver(&snd_ubi32_cs4384_driver);
+}
+module_exit(snd_ubi32_cs4384_exit);
+
+/*
+ * Module properties
+ */
+MODULE_ALIAS("i2c:" DRIVER_NAME);
+MODULE_AUTHOR("Patrick Tjin");
+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices CS4384");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/sound/ubicom32/ubi32-generic.c
@@ -0,0 +1,165 @@
+/*
+ * sound/ubicom32/ubi32-generic.c
+ * Interface to ubicom32 virtual audio peripheral
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include "ubi32.h"
+
+#define DRIVER_NAME "snd-ubi32-generic"
+
+/*
+ * Module properties
+ */
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+
+/*
+ * Card private data free function
+ */
+void snd_ubi32_generic_free(struct snd_card *card)
+{
+ //struct ubi32_snd_priv *ubi32_priv = card->private_data;
+
+ /*
+ * Free all the fields in the snd_ubi32_priv struct
+ */
+ // Nothing to free at this time because ubi32_priv just maintains pointers
+}
+
+/*
+ * Ubicom audio driver probe() method. Args change depending on whether we use
+ * platform_device or i2c_device.
+ */
+static int snd_ubi32_generic_probe(struct platform_device *dev)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+ int err;
+
+ /*
+ * Create a snd_card structure
+ */
+ card = snd_card_new(index, "Ubi32-Generic", THIS_MODULE, sizeof(struct ubi32_snd_priv));
+
+ if (card == NULL) {
+ return -ENOMEM;
+ }
+
+ card->private_free = snd_ubi32_generic_free; /* Not sure if correct */
+ ubi32_priv = card->private_data;
+
+ /*
+ * Initialize the snd_card's private data structure
+ */
+ ubi32_priv->card = card;
+
+ /*
+ * Create the new PCM instance
+ */
+ err = snd_ubi32_pcm_probe(ubi32_priv, dev);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "Ubi32-Generic");
+ strcpy(card->shortname, "Ubi32-Generic");
+ sprintf(card->longname, "%s at sendirq=%d recvirq=%d", card->shortname, ubi32_priv->tx_irq, ubi32_priv->rx_irq);
+
+ snd_card_set_dev(card, &dev->dev);
+
+ /* Register the sound card */
+ if ((err = snd_card_register(card)) != 0) {
+ snd_printk(KERN_INFO "snd_card_register error\n");
+ }
+
+ /* Store card for access from other methods */
+ platform_set_drvdata(dev, card);
+
+ return 0;
+}
+
+/*
+ * Ubicom audio driver remove() method
+ */
+static int __devexit snd_ubi32_generic_remove(struct platform_device *dev)
+{
+ struct snd_card *card;
+ struct ubi32_snd_priv *ubi32_priv;
+
+ card = platform_get_drvdata(dev);
+ ubi32_priv = card->private_data;
+ snd_ubi32_pcm_remove(ubi32_priv);
+
+ snd_card_free(platform_get_drvdata(dev));
+ platform_set_drvdata(dev, NULL);
+ return 0;
+}
+
+/*
+ * Platform driver definition
+ */
+static struct platform_driver snd_ubi32_generic_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = snd_ubi32_generic_probe,
+ .remove = __devexit_p(snd_ubi32_generic_remove),
+};
+
+/*
+ * snd_ubi32_generic_init
+ */
+static int __init snd_ubi32_generic_init(void)
+{
+ return platform_driver_register(&snd_ubi32_generic_driver);
+}
+module_init(snd_ubi32_generic_init);
+
+/*
+ * snd_ubi32_generic_exit
+ */
+static void __exit snd_ubi32_generic_exit(void)
+{
+ platform_driver_unregister(&snd_ubi32_generic_driver);
+}
+module_exit(snd_ubi32_generic_exit);
+
+/*
+ * Module properties
+ */
+//#if defined(CONFIG_SND_UBI32_AUDIO_I2C)
+//MODULE_ALIAS("i2c:snd-ubi32");
+//#endif
+MODULE_AUTHOR("Aaron Jow, Patrick Tjin");
+MODULE_DESCRIPTION("Driver for Ubicom32 audio devices");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/sound/ubicom32/ubi32.h
@@ -0,0 +1,96 @@
+/*
+ * sound/ubicom32/ubi32.h
+ * Common header file for all ubi32- sound drivers
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _UBI32_H
+#define _UBI32_H
+
+#define SND_UBI32_DEBUG 0 // Debug flag
+
+#include <linux/platform_device.h>
+#include <asm/devtree.h>
+#include <asm/audio_tio.h>
+#include <asm/ubi32-pcm.h>
+
+struct ubi32_snd_priv;
+
+typedef int (*set_channels_t)(struct ubi32_snd_priv *priv, int channels);
+typedef int (*set_rate_t)(struct ubi32_snd_priv *priv, int rate);
+
+struct ubi32_snd_priv {
+ /*
+ * Any variables that are needed locally here but NOT in
+ * the VP itself should go in here.
+ */
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+
+ /*
+ * DAC parameters. These are the parameters for the specific
+ * DAC we are driving. The I2S component can run at a range
+ * of frequencies, but the DAC may be limited. We may want
+ * to make this an array of some sort in the future?
+ *
+ * min/max_sample_rate if set to 0 are ignored.
+ */
+ int max_sample_rate;
+ int min_sample_rate;
+
+ /*
+ * The size a period (group) of audio samples. The VP does
+ * not need to know this; each DMA transfer is made to be
+ * one period.
+ */
+ u32_t period_size;
+
+ spinlock_t ubi32_lock;
+
+ struct audiotioregs *regs;
+ u8 tx_irq;
+ u8 rx_irq;
+
+ void *client;
+
+ /*
+ * Operations which the base DAC driver can implement
+ */
+ set_channels_t set_channels;
+ set_rate_t set_rate;
+
+ /*
+ * platform data
+ */
+ struct ubi32pcm_platform_data *pdata;
+
+ /*
+ * Private driver data (used for DAC driver control, etc)
+ */
+ void *drvdata;
+};
+
+#define snd_ubi32_priv_get_drv(priv) ((priv)->drvdata)
+#define snd_ubi32_priv_set_drv(priv, data) (((priv)->drvdata) = (void *)(data))
+
+extern int snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev);
+extern void snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv);
+
+#endif
--- /dev/null
+++ b/sound/ubicom32/ubi32-pcm.c
@@ -0,0 +1,680 @@
+/*
+ * sound/ubicom32/ubi32-pcm.c
+ * Interface to ubicom32 virtual audio peripheral
+ *
+ * (C) Copyright 2009, Ubicom, Inc.
+ *
+ * This file is part of the Ubicom32 Linux Kernel Port.
+ *
+ * The Ubicom32 Linux Kernel Port is free software: you can redistribute
+ * it and/or modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The Ubicom32 Linux Kernel Port is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Ubicom32 Linux Kernel Port. If not,
+ * see <http://www.gnu.org/licenses/>.
+ *
+ * Ubicom32 implementation derived from (with many thanks):
+ * arch/m68knommu
+ * arch/blackfin
+ * arch/parisc
+ */
+
+#include <linux/interrupt.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <asm/ip5000.h>
+#include <asm/ubi32-pcm.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include "ubi32.h"
+
+struct ubi32_snd_runtime_data {
+ dma_addr_t dma_buffer; /* Physical address of DMA buffer */
+ dma_addr_t dma_buffer_end; /* First address beyond end of DMA buffer */
+ size_t period_size;
+ dma_addr_t period_ptr; /* Physical address of next period */
+ unsigned int flags;
+};
+
+static void snd_ubi32_vp_int_set(struct snd_pcm *pcm)
+{
+ struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
+ ubicom32_set_interrupt(ubi32_priv->tx_irq);
+}
+
+static snd_pcm_uframes_t snd_ubi32_playback_pointer(struct snd_pcm_substream *substream)
+{
+ struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
+ struct audiotioregs *regs = ubi32_priv->regs;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+
+ dma_addr_t read_pos;
+
+ snd_pcm_uframes_t frames;
+ if (!regs->current_read_pos) {
+ /*
+ * If current_read_pos is NULL (e.g. right after the HW is started or
+ * when the HW is stopped), then handle this case separately.
+ */
+ return 0;
+ }
+
+ read_pos = (dma_addr_t)regs->current_read_pos;
+ frames = bytes_to_frames(runtime, read_pos - ubi32_rd->dma_buffer);
+ if (frames == runtime->buffer_size) {
+ frames = 0;
+ }
+ return frames;
+}
+
+/*
+ * Audio trigger
+ */
+static int snd_ubi32_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
+ struct audiotioregs *regs = ubi32_priv->regs;
+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+ int ret = 0;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_trigger cmd=%d=", cmd);
+#endif
+
+ if (regs->command != UBI32_AUDIO_CMD_NONE) {
+ snd_printk(KERN_WARNING "Can't send command to audio device at this time\n");
+ // Set a timer to call this function back later. How to do this?
+ return 0;
+ }
+
+ /*
+ * Set interrupt flag to indicate that we interrupted audio device
+ * to send a command
+ */
+ //regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "START\n");
+#endif
+ /*
+ * Ready the DMA transfer
+ */
+ ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "trigger period_ptr=%lx\n", (unsigned long)ubi32_rd->period_ptr);
+#endif
+ regs->playback_xfer_requests[0].ptr = (void *)ubi32_rd->period_ptr;
+ regs->playback_xfer_requests[0].ctr = ubi32_rd->period_size;
+ regs->playback_xfer_requests[0].active = 1;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "xfer_request 0 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
+#endif
+
+ ubi32_rd->period_ptr += ubi32_rd->period_size;
+ regs->playback_xfer_requests[1].ptr = (void *)ubi32_rd->period_ptr;
+ regs->playback_xfer_requests[1].ctr = ubi32_rd->period_size;
+ regs->playback_xfer_requests[1].active = 1;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "xfer_request 1 ptr=0x%x ctr=%u\n", ubi32_rd->period_ptr, ubi32_rd->period_size);
+#endif
+
+ /*
+ * Tell the VP that we want to begin playback by filling in the
+ * command field and then interrupting the audio VP
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_START;
+ snd_ubi32_vp_int_set(substream->pcm);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "STOP\n");
+#endif
+
+ /*
+ * Tell the VP that we want to stop playback by filling in the
+ * command field and then interrupting the audio VP
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_STOP;
+ snd_ubi32_vp_int_set(substream->pcm);
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "PAUSE_PUSH\n");
+#endif
+
+ /*
+ * Tell the VP that we want to pause playback by filling in the
+ * command field and then interrupting the audio VP
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_PAUSE;
+ snd_ubi32_vp_int_set(substream->pcm);
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "PAUSE_RELEASE\n");
+#endif
+ /*
+ * Tell the VP that we want to resume paused playback by filling
+ * in the command field and then interrupting the audio VP
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_RESUME;
+ snd_ubi32_vp_int_set(substream->pcm);
+ break;
+
+ default:
+ snd_printk(KERN_WARNING "Unhandled trigger\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Prepare to transfer an audio stream to the codec
+ */
+static int snd_ubi32_playback_prepare(struct snd_pcm_substream *substream)
+{
+ /*
+ * Configure registers and setup the runtime instance for DMA transfers
+ */
+ //struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
+ struct audiotioregs *regs = ubi32_priv->regs;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_prepare: sending STOP command to audio device\n");
+#endif
+
+ /*
+ * Make sure the audio device is stopped
+ */
+
+ /*
+ * Set interrupt flag to indicate that we interrupted audio device
+ * to send a command
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_STOP;
+ snd_ubi32_vp_int_set(substream->pcm);
+
+ return 0;
+}
+
+/*
+ * Allocate DMA buffers from preallocated memory.
+ * Preallocation was done in snd_ubi32_pcm_new()
+ */
+static int snd_ubi32_playback_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct ubi32_snd_priv *ubi32_priv = substream->pcm->private_data;
+ struct audiotioregs *regs = ubi32_priv->regs;
+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+
+ /*
+ * Use pre-allocated memory from ubi32_snd_pcm_new() to satisfy
+ * this memory request.
+ */
+ int ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_hw_params\n");
+#endif
+
+ if (!(regs->channel_mask & (1 << params_channels(hw_params)))) {
+ snd_printk(KERN_INFO "snd_ubi32_playback_hw_params unsupported number of channels %d mask %08x\n", params_channels(hw_params), regs->channel_mask);
+ return -EINVAL;
+ }
+
+ if (ubi32_priv->set_channels) {
+ int ret = ubi32_priv->set_channels(ubi32_priv, params_channels(hw_params));
+ if (ret) {
+ snd_printk(KERN_WARNING "Unable to set channels to %d, ret=%d\n", params_channels(hw_params), ret);
+ return ret;
+ }
+ }
+
+ if (ubi32_priv->set_rate) {
+ int ret = ubi32_priv->set_rate(ubi32_priv, params_rate(hw_params));
+ if (ret) {
+ snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
+ return ret;
+ }
+ }
+
+ if (ubi32_priv->pdata->set_rate) {
+ int ret = ubi32_priv->pdata->set_rate(ubi32_priv->pdata->appdata, params_rate(hw_params));
+ if (ret) {
+ snd_printk(KERN_WARNING "Unable to set rate to %d, ret=%d\n", params_rate(hw_params), ret);
+ return ret;
+ }
+ }
+
+ if (regs->command != UBI32_AUDIO_CMD_NONE) {
+ snd_printk(KERN_WARNING "snd_ubi32_playback_hw_params: tio busy\n");
+ return -EAGAIN;
+ }
+
+ if (params_format(hw_params) == SNDRV_PCM_FORMAT_S16_LE) {
+ regs->flags |= UBI32_CMD_SETUP_FLAG_LE;
+ } else {
+ regs->flags &= ~UBI32_CMD_SETUP_FLAG_LE;
+ }
+ regs->channels = params_channels(hw_params);
+ regs->sample_rate = params_rate(hw_params);
+ regs->command = UBI32_AUDIO_CMD_SETUP;
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ snd_ubi32_vp_int_set(substream->pcm);
+
+ /*
+ * Wait for the command to complete
+ */
+ while (regs->command != UBI32_AUDIO_CMD_NONE) {
+ udelay(1);
+ }
+
+ //snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ //runtime->dma_bytes = params_buffer_bytes(hw_params);
+
+ /*
+ * Put the DMA info into the DMA descriptor that we will
+ * use to do transfers to our audio VP "hardware"
+ */
+
+ /*
+ * Mark both DMA transfers as not ready/inactive
+ */
+ regs->playback_xfer_requests[0].active = 0;
+ regs->playback_xfer_requests[1].active = 0;
+
+ /*
+ * Put the location of the buffer into the runtime data instance
+ */
+ ubi32_rd->dma_buffer = (dma_addr_t)runtime->dma_area;
+ ubi32_rd->dma_buffer_end = (dma_addr_t)(runtime->dma_area + runtime->dma_bytes);
+
+ /*
+ * Get the period size
+ */
+ ubi32_rd->period_size = params_period_bytes(hw_params);
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "DMA for ubi32 audio initialized dma_area=0x%x dma_bytes=%d, period_size=%d\n", (unsigned int)runtime->dma_area, (unsigned int)runtime->dma_bytes, ubi32_rd->period_size);
+ snd_printk(KERN_INFO "Private buffer ubi32_rd: dma_buffer=0x%x dma_buffer_end=0x%x\n", ubi32_rd->dma_buffer, ubi32_rd->dma_buffer_end);
+#endif
+
+ return ret;
+}
+
+/*
+ * This is the reverse of snd_ubi32_playback_hw_params
+ */
+static int snd_ubi32_playback_hw_free(struct snd_pcm_substream *substream)
+{
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_hw_free\n");
+#endif
+ return snd_pcm_lib_free_pages(substream);
+}
+
+/*
+ * Audio virtual peripheral capabilities
+ */
+static struct snd_pcm_hardware snd_ubi32_playback_hw =
+{
+ /* FILL IN THIS STRUCT WITH HW PARAMS SPECIFIC TO IPI2SOUT */
+ // This is defined in include/sound/asound.h or
+ // include/sound/pcm.h
+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), // NOT SURE ABOUT THIS
+ //.info = (SNDRV_PCM_INFO_INTERLEAVED |
+ // SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ // SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+ // SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
+ .buffer_bytes_max = (64*1024), // NOT SURE ABOUT THIS
+ .period_bytes_min = 64,
+ .period_bytes_max = 8184,//8184,//8176,
+ .periods_min = 2,
+ .periods_max = 255, // THIS WILL ALMOST CERTAINLY NEED TO BE CHANGED
+ .fifo_size = 0, // THIS IS IGNORED BY ALSA
+};
+
+/*
+ * We fill this in later
+ */
+static struct snd_pcm_hw_constraint_list ubi32_playback_rates;
+
+static int snd_ubi32_playback_close(struct snd_pcm_substream *substream)
+{
+ /* Disable codec, stop DMA, free private data structures */
+ //struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_close\n");
+#endif
+
+ substream->runtime->private_data = NULL;
+
+ kfree(ubi32_rd);
+
+ return 0;
+}
+
+static int snd_ubi32_playback_open(struct snd_pcm_substream *substream)
+{
+ //struct ubi32_snd_priv *ubi32_priv = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct ubi32_snd_runtime_data *ubi32_rd;
+ int ret = 0;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "ubi32 playback open\n");
+#endif
+
+ /* Associate capabilities with component */
+ runtime->hw = snd_ubi32_playback_hw;
+
+ /*
+ * Inform ALSA about constraints of the audio device
+ */
+ ret = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &ubi32_playback_rates);
+ if (ret < 0) {
+ snd_printk(KERN_INFO "invalid rate\n");
+ goto out;
+ }
+
+ /* Force the buffer size to be an integer multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ snd_printk(KERN_INFO "invalid period\n");
+ goto out;
+ }
+ /* Initialize structures/registers */
+ ubi32_rd = kzalloc(sizeof(struct ubi32_snd_runtime_data), GFP_KERNEL);
+ if (ubi32_rd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ runtime->private_data = ubi32_rd;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_open returned 0\n");
+#endif
+
+ return 0;
+out:
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "snd_ubi32_playback_open returned %d\n", ret);
+#endif
+
+ return ret;
+}
+
+static struct snd_pcm_ops snd_ubi32_playback_ops = {
+ .open = snd_ubi32_playback_open, /* Open */
+ .close = snd_ubi32_playback_close, /* Close */
+ .ioctl = snd_pcm_lib_ioctl, /* Generic IOCTL handler */
+ .hw_params = snd_ubi32_playback_hw_params, /* Hardware parameters/capabilities */
+ .hw_free = snd_ubi32_playback_hw_free, /* Free function for hw_params */
+ .prepare = snd_ubi32_playback_prepare,
+ .trigger = snd_ubi32_playback_trigger,
+ .pointer = snd_ubi32_playback_pointer,
+};
+
+/*
+ * Interrupt handler that gets called when the audio device
+ * interrupts Linux
+ */
+static irqreturn_t snd_ubi32_pcm_interrupt(int irq, void *appdata)
+{
+ struct snd_pcm *pcm = (struct snd_pcm *)appdata;
+ struct ubi32_snd_priv *ubi32_priv = pcm->private_data;
+ struct audiotioregs *regs = ubi32_priv->regs;
+
+ // Only one substream exists because our VP does not mix
+ // streams. Therefore we don't have to search through
+ // substreams like the at91 driver does.
+ struct snd_pcm_substream *substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ struct ubi32_snd_runtime_data *ubi32_rd = substream->runtime->private_data;
+ int dma_to_fill = 0;
+
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "Ubi32 ALSA interrupt\n");
+#endif
+
+ if (!pcm) {
+ snd_printk(KERN_WARNING "pcm does not exist\n");
+ return IRQ_HANDLED;
+ }
+
+ if (ubi32_rd == NULL) {
+ snd_printk(KERN_WARNING "No runtime data\n");
+ return IRQ_HANDLED;
+ }
+ // Check interrupt cause
+ if (0) {
+ // Handle the underflow case
+ } else if ((regs->status & UBI32_AUDIO_STATUS_PLAY_DMA0_REQUEST) ||
+ (regs->status & UBI32_AUDIO_STATUS_PLAY_DMA1_REQUEST)) {
+ if (regs->status & UBI32_AUDIO_STATUS_PLAY_DMA0_REQUEST) {
+ dma_to_fill = 0;
+ regs->status &= ~UBI32_AUDIO_STATUS_PLAY_DMA0_REQUEST;
+ } else if (regs->status & UBI32_AUDIO_STATUS_PLAY_DMA1_REQUEST) {
+ dma_to_fill = 1;
+ regs->status &= ~UBI32_AUDIO_STATUS_PLAY_DMA1_REQUEST;
+ }
+ ubi32_rd->period_ptr += ubi32_rd->period_size;
+ if (ubi32_rd->period_ptr >= ubi32_rd->dma_buffer_end) {
+ ubi32_rd->period_ptr = ubi32_rd->dma_buffer;
+ }
+ regs->playback_xfer_requests[dma_to_fill].ptr = (void *)ubi32_rd->period_ptr;
+ regs->playback_xfer_requests[dma_to_fill].ctr = ubi32_rd->period_size;
+ regs->playback_xfer_requests[dma_to_fill].active = 1;
+#if SND_UBI32_DEBUG
+ snd_printk(KERN_INFO "xfer_request %d ptr=0x%x ctr=%u\n", dma_to_fill, ubi32_rd->period_ptr, ubi32_rd->period_size);
+#endif
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_MORE_SAMPLES;
+ snd_ubi32_vp_int_set(substream->pcm);
+ }
+ // If we are interrupted by the VP, that means we completed
+ // processing one period of audio. We need to inform the upper
+ // layers of ALSA of this.
+ snd_pcm_period_elapsed(substream);
+
+ return IRQ_HANDLED;
+}
+
+void __devexit snd_ubi32_pcm_remove(struct ubi32_snd_priv *ubi32_priv)
+{
+ struct snd_pcm *pcm = ubi32_priv->pcm;
+ free_irq(ubi32_priv->rx_irq, pcm);
+}
+
+#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
+#error "Change this table to match pcm.h"
+#endif
+static unsigned int rates[] __initdata = {5512, 8000, 11025, 16000, 22050,
+ 32000, 44100, 48000, 64000, 88200,
+ 96000, 176400, 192000};
+
+/*
+ * snd_ubi32_pcm_probe
+ */
+int __devinit snd_ubi32_pcm_probe(struct ubi32_snd_priv *ubi32_priv, struct platform_device *pdev)
+{
+ struct snd_pcm *pcm;
+ int ret, err;
+ int i;
+ int j;
+ int nrates;
+ unsigned int rate_max = 0;
+ unsigned int rate_min = 0xFFFFFFFF;
+ unsigned int rate_mask = 0;
+ struct audiotioregs *regs;
+ struct resource *res_regs;
+ struct resource *res_irq_tx;
+ struct resource *res_irq_rx;
+ struct ubi32pcm_platform_data *pdata;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ return -ENODEV;
+ }
+
+ /*
+ * Get our resources, regs is the hardware driver base address
+ * and the tx and rx irqs are used to communicate with the
+ * hardware driver.
+ */
+ res_regs = platform_get_resource(pdev, IORESOURCE_MEM, AUDIOTIO_MEM_RESOURCE);
+ res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIOTIO_TX_IRQ_RESOURCE);
+ res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, AUDIOTIO_RX_IRQ_RESOURCE);
+ if (!res_regs || !res_irq_tx || !res_irq_rx) {
+ snd_printk(KERN_WARNING "Could not get resources");
+ return -ENODEV;
+ }
+
+ ubi32_priv->regs = (struct audiotioregs *)res_regs->start;
+ ubi32_priv->tx_irq = res_irq_tx->start;
+ ubi32_priv->rx_irq = res_irq_rx->start;
+
+ /*
+ * Check the version
+ */
+ regs = ubi32_priv->regs;
+ if (regs->version != AUDIOTIOREGS_VERSION) {
+ snd_printk(KERN_WARNING "This audiotioreg is not compatible with this driver\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Find out the standard rates, also find max and min rates
+ */
+ for (i = 0; i < ARRAY_SIZE(rates); i++) {
+ int found = 0;
+ for (j = 0; j < regs->n_sample_rates; j++) {
+ if (rates[i] == regs->sample_rates[j]) {
+ /*
+ * Check to see if it is supported by the dac
+ */
+ if ((rates[i] >= ubi32_priv->min_sample_rate) &&
+ (!ubi32_priv->max_sample_rate ||
+ (ubi32_priv->max_sample_rate && (rates[i] <= ubi32_priv->max_sample_rate)))) {
+ found = 1;
+ rate_mask |= (1 << i);
+ nrates++;
+ if (rates[i] < rate_min) {
+ rate_min = rates[i];
+ }
+ if (rates[i] > rate_max) {
+ rate_max = rates[i];
+ }
+ break;
+ }
+ }
+ }
+ if (!found) {
+ rate_mask |= SNDRV_PCM_RATE_KNOT;
+ }
+ }
+
+ snd_ubi32_playback_hw.rates = rate_mask;
+ snd_ubi32_playback_hw.rate_min = rate_min;
+ snd_ubi32_playback_hw.rate_max = rate_max;
+ ubi32_playback_rates.count = regs->n_sample_rates;
+ ubi32_playback_rates.list = regs->sample_rates;
+ ubi32_playback_rates.mask = 0;
+
+ for (i = 0; i < 32; i++) {
+ if (regs->channel_mask & (1 << i)) {
+ if (!snd_ubi32_playback_hw.channels_min) {
+ snd_ubi32_playback_hw.channels_min = i;
+ }
+ snd_ubi32_playback_hw.channels_max = i;
+ }
+ }
+ snd_printk(KERN_INFO "Ubi32PCM: channels_min:%u channels_max:%u\n",
+ snd_ubi32_playback_hw.channels_min,
+ snd_ubi32_playback_hw.channels_max);
+
+ if (regs->caps & AUDIOTIONODE_CAP_BE) {
+ snd_ubi32_playback_hw.formats |= SNDRV_PCM_FMTBIT_S16_BE;
+ }
+ if (regs->caps & AUDIOTIONODE_CAP_LE) {
+ snd_ubi32_playback_hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
+ }
+ snd_printk(KERN_INFO "Ubi32PCM: rates:%08x min:%u max:%u count:%d fmts:%016llx\n",
+ snd_ubi32_playback_hw.rates,
+ snd_ubi32_playback_hw.rate_min,
+ snd_ubi32_playback_hw.rate_max,
+ ubi32_playback_rates.count,
+ snd_ubi32_playback_hw.formats);
+
+ ret = snd_pcm_new(ubi32_priv->card, "Ubi32 PCM", 0, 1, 0, &pcm);
+ if (ret < 0) {
+ return ret;
+ }
+
+ pcm->private_data = ubi32_priv;
+ ubi32_priv->pcm = pcm;
+ ubi32_priv->pdata = pdata;
+
+ pcm->info_flags = 0; // What is this for? Just copied from other drivers
+
+ strcpy(pcm->name, "Ubi32-PCM");
+
+ // How do we allocate the buffer for non PCI devices?
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ 45*1024, 64*1024); //NOT SURE ABOUT SIZE, CHECK LATER
+
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ubi32_playback_ops);
+
+ /*
+ * Start up the TIO
+ */
+ regs->int_flags |= UBI32_AUDIO_INT_FLAG_COMMAND;
+ regs->command = UBI32_AUDIO_CMD_ENABLE;
+ snd_ubi32_vp_int_set(pcm);
+
+ /*
+ * Request IRQ
+ */
+ err = request_irq(ubi32_priv->rx_irq, snd_ubi32_pcm_interrupt, IRQF_DISABLED, pcm->name, pcm);
+ if (err) {
+ snd_printk(KERN_WARNING "request_irq failed: irq=%d err=%d\n", ubi32_priv->rx_irq, err);
+ return -ENODEV;
+ }
+
+ return ret;
+
+}
--- /dev/null
+++ b/arch/ubicom32/lib/ashldi3.c
@@ -0,0 +1,62 @@
+/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+typedef int DItype __attribute__ ((mode (DI)));
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct DIstruct {SItype high, low;};
+
+typedef union
+{
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+DItype
+__ashldi3 (DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0)
+ {
+ w.s.low = 0;
+ w.s.high = (USItype)uu.s.low << -bm;
+ }
+ else
+ {
+ USItype carries = (USItype)uu.s.low >> bm;
+ w.s.low = (USItype)uu.s.low << b;
+ w.s.high = ((USItype)uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
--- /dev/null
+++ b/arch/ubicom32/lib/ashrdi3.c
@@ -0,0 +1,63 @@
+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+typedef int DItype __attribute__ ((mode (DI)));
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct DIstruct {SItype high, low;};
+
+typedef union
+{
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+DItype
+__ashrdi3 (DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0)
+ {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ }
+ else
+ {
+ USItype carries = (USItype)uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype)uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
--- /dev/null
+++ b/arch/ubicom32/lib/divmod.c
@@ -0,0 +1,85 @@
+unsigned long
+udivmodsi4(unsigned long num, unsigned long den, int modwanted)
+{
+ unsigned long bit = 1;
+ unsigned long res = 0;
+
+ while (den < num && bit && !(den & (1L<<31)))
+ {
+ den <<=1;
+ bit <<=1;
+ }
+ while (bit)
+ {
+ if (num >= den)
+ {
+ num -= den;
+ res |= bit;
+ }
+ bit >>=1;
+ den >>=1;
+ }
+ if (modwanted) return num;
+ return res;
+}
+
+long
+__udivsi3 (long a, long b)
+{
+ return udivmodsi4 (a, b, 0);
+}
+
+long
+__umodsi3 (long a, long b)
+{
+ return udivmodsi4 (a, b, 1);
+}
+
+long
+__divsi3 (long a, long b)
+{
+ int neg = 0;
+ long res;
+
+ if (a < 0)
+ {
+ a = -a;
+ neg = !neg;
+ }
+
+ if (b < 0)
+ {
+ b = -b;
+ neg = !neg;
+ }
+
+ res = udivmodsi4 (a, b, 0);
+
+ if (neg)
+ res = -res;
+
+ return res;
+}
+
+long
+__modsi3 (long a, long b)
+{
+ int neg = 0;
+ long res;
+
+ if (a < 0)
+ {
+ a = -a;
+ neg = 1;
+ }
+
+ if (b < 0)
+ b = -b;
+
+ res = udivmodsi4 (a, b, 1);
+
+ if (neg)
+ res = -res;
+
+ return res;
+}
--- /dev/null
+++ b/arch/ubicom32/lib/lshrdi3.c
@@ -0,0 +1,62 @@
+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+typedef int DItype __attribute__ ((mode (DI)));
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct DIstruct {SItype high, low;};
+
+typedef union
+{
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+DItype
+__lshrdi3 (DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0)
+ {
+ w.s.high = 0;
+ w.s.low = (USItype)uu.s.high >> -bm;
+ }
+ else
+ {
+ USItype carries = (USItype)uu.s.high << bm;
+ w.s.high = (USItype)uu.s.high >> b;
+ w.s.low = ((USItype)uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
--- /dev/null
+++ b/arch/ubicom32/lib/muldi3.c
@@ -0,0 +1,87 @@
+/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and
+ gcc-2.7.2.3/longlong.h which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define UWtype USItype
+#define UHWtype USItype
+#define W_TYPE_SIZE 32
+#define __BITS4 (W_TYPE_SIZE / 4)
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __x0, __x1, __x2, __x3; \
+ UHWtype __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart (u); \
+ __uh = __ll_highpart (u); \
+ __vl = __ll_lowpart (v); \
+ __vh = __ll_highpart (v); \
+ \
+ __x0 = (UWtype) __ul * __vl; \
+ __x1 = (UWtype) __ul * __vh; \
+ __x2 = (UWtype) __uh * __vl; \
+ __x3 = (UWtype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart (__x1); \
+ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
+ } while (0)
+
+
+#define __umulsidi3(u, v) \
+ ({DIunion __w; \
+ umul_ppmm (__w.s.high, __w.s.low, u, v); \
+ __w.ll; })
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+typedef int DItype __attribute__ ((mode (DI)));
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct DIstruct {SItype high, low;};
+
+typedef union
+{
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+DItype
+__muldi3 (DItype u, DItype v)
+{
+ DIunion w;
+ DIunion uu, vv;
+
+ uu.ll = u,
+ vv.ll = v;
+
+ w.ll = __umulsidi3 (uu.s.low, vv.s.low);
+ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
+ + (USItype) uu.s.high * (USItype) vv.s.low);
+
+ return w.ll;
+}
View Git Blame Copy Permalink