qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-09 21:41:53 +02:00
Code
2c7af0d7c7
openwrt-xburst/target/linux/cns3xxx/patches-2.6.31/102-cns3xxx_ata_support.patch
kaloz 642064ae9a add support for the Gateworks Laguna family (Cavium Networks Econa CNS3xxx) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-21 11:20:53 +00:00

3351 lines
94 KiB
Diff
Raw Blame History

--- /dev/null
+++ b/drivers/ata/cns3xxx_ahci.c
@@ -0,0 +1,3281 @@
+/*
+ * ahci.c - AHCI SATA support
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+/*
+ * Cavium CNS3XXX notice
+ * This driver is copy from ahci, and this driver only modify memory access function.
+ * Let the driver support non-PCI device
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <mach/pm.h>
+#include <mach/misc.h>
+
+#define DRV_NAME "cns3xxx_ahci"
+#define DRV_VERSION "3.0"
+
+#define MISC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT+offset)))
+#define CNS3XXX_MISC_REGISTER MISC_REG_VALUE(0x514)
+#define AHCI_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_SATA2_BASE_VIRT+offset)))
+#define CNS3XXX_AHCI_HOSTCTL_REG AHCI_REG_VALUE(0x04)
+
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE 0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT 0x0000000f
+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
+#define EM_MSG_LED_VALUE 0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
+#define EM_MSG_LED_VALUE_OFF 0xfff80000
+#define EM_MSG_LED_VALUE_ON 0x00010000
+
+/* PHY Misc Define */
+#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310)
+#define MISC_SATA_CORE_ID MISC_MEM_MAP_VALUE(0x600)
+#define MISC_SATA_PORT0_PHY_CFG MISC_MEM_MAP_VALUE(0x604)
+#define MISC_SATA_PORT1_PHY_CFG MISC_MEM_MAP_VALUE(0x608)
+#define MISC_SATA_PORT0_PHY_TST MISC_MEM_MAP_VALUE(0x60C)
+#define MISC_SATA_PORT1_PHY_TST MISC_MEM_MAP_VALUE(0x610)
+
+
+static int ahci_skip_host_reset;
+static int ahci_ignore_sss;
+
+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy);
+static void ahci_disable_alpm(struct ata_port *ap);
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size);
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size);
+
+enum {
+ AHCI_PCI_BAR = 5,
+ AHCI_MAX_PORTS = 32,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_MAX_CMDS = 32,
+ AHCI_CMD_SZ = 32,
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TBL_CDB = 0x40,
+ AHCI_CMD_TBL_HDR_SZ = 0x80,
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
+ AHCI_RX_FIS_SZ,
+ AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
+ AHCI_CMD_WRITE = (1 << 6),
+ AHCI_CMD_PREFETCH = (1 << 7),
+ AHCI_CMD_RESET = (1 << 8),
+ AHCI_CMD_CLR_BUSY = (1 << 10),
+
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
+
+ board_ahci = 0,
+ board_ahci_vt8251 = 1,
+ board_ahci_ign_iferr = 2,
+ board_ahci_sb600 = 3,
+ board_ahci_mv = 4,
+ board_ahci_sb700 = 5, /* for SB700 and SB800 */
+ board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
+ board_ahci_yesncq = 8,
+
+ /* global controller registers */
+ HOST_CAP = 0x00, /* host capabilities */
+ HOST_CTL = 0x04, /* global host control */
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+
+ /* HOST_CTL bits */
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
+
+ /* HOST_CAP bits */
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
+ HOST_CAP_SSC = (1 << 14), /* Slumber capable */
+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+ /* registers for each SATA port */
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
+ PORT_CMD = 0x18, /* port command */
+ PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
+ PORT_CMD_ISSUE = 0x38, /* command issue */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
+
+ /* PORT_IRQ_{STAT,MASK} bits */
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
+
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
+
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_IF_ERR |
+ PORT_IRQ_CONNECT |
+ PORT_IRQ_PHYRDY |
+ PORT_IRQ_UNK_FIS |
+ PORT_IRQ_BAD_PMP,
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
+ PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_DATA_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
+
+ /* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
+
+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+
+ /* hpriv->flags bits */
+ AHCI_HFLAG_NO_NCQ = (1 << 0),
+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
+
+ /* ap->flags bits */
+
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
+
+ /* em constants */
+ EM_MAX_SLOTS = 8,
+ EM_MAX_RETRY = 5,
+
+ /* em_ctl bits */
+ EM_CTL_RST = (1 << 9), /* Reset */
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
+
+ /* CNS3XXX define */
+ HOST_TIMER1MS = 0xe0, /* Timer 1ms register */
+};
+
+struct ahci_cmd_hdr {
+ __le32 opts;
+ __le32 status;
+ __le32 tbl_addr;
+ __le32 tbl_addr_hi;
+ __le32 reserved[4];
+};
+
+struct ahci_sg {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 flags_size;
+};
+
+struct ahci_em_priv {
+ enum sw_activity blink_policy;
+ struct timer_list timer;
+ unsigned long saved_activity;
+ unsigned long activity;
+ unsigned long led_state;
+};
+
+struct ahci_host_priv {
+ unsigned int flags; /* AHCI_HFLAG_* */
+ u32 cap; /* cap to use */
+ u32 port_map; /* port map to use */
+ u32 saved_cap; /* saved initial cap */
+ u32 saved_port_map; /* saved initial port_map */
+ u32 em_loc; /* enclosure management location */
+};
+
+struct ahci_port_priv {
+ struct ata_link *active_link;
+ struct ahci_cmd_hdr *cmd_slot;
+ dma_addr_t cmd_slot_dma;
+ void *cmd_tbl;
+ dma_addr_t cmd_tbl_dma;
+ void *rx_fis;
+ dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
+ unsigned int ncq_saw_sdb:1;
+ u32 intr_mask; /* interrupts to enable */
+ /* enclosure management info per PM slot */
+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
+};
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+#if 0
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+#else
+static int ahci_probe(struct platform_device *pdev);
+static int ahci_remove(struct platform_device *pdev);
+#endif
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
+static int ahci_port_start(struct ata_port *ap);
+static void ahci_port_stop(struct ata_port *ap);
+static void ahci_qc_prep(struct ata_queued_cmd *qc);
+static void ahci_freeze(struct ata_port *ap);
+static void ahci_thaw(struct ata_port *ap);
+static void ahci_pmp_attach(struct ata_port *ap);
+static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+#if 0
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+#endif
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
+static void ahci_error_handler(struct ata_port *ap);
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts);
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int ahci_pci_device_resume(struct pci_dev *pdev);
+#endif
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
+static ssize_t ahci_activity_store(struct ata_device *dev,
+ enum sw_activity val);
+static void ahci_init_sw_activity(struct ata_link *link);
+
+static struct device_attribute *ahci_shost_attrs[] = {
+ &dev_attr_link_power_management_policy,
+ &dev_attr_em_message_type,
+ &dev_attr_em_message,
+ NULL
+};
+
+static struct device_attribute *ahci_sdev_attrs[] = {
+ &dev_attr_sw_activity,
+ &dev_attr_unload_heads,
+ NULL
+};
+
+static struct scsi_host_template ahci_sht = {
+ ATA_NCQ_SHT(DRV_NAME),
+ .can_queue = AHCI_MAX_CMDS - 1,
+ .sg_tablesize = AHCI_MAX_SG,
+ .dma_boundary = AHCI_DMA_BOUNDARY,
+ .shost_attrs = ahci_shost_attrs,
+ .sdev_attrs = ahci_sdev_attrs,
+};
+
+static struct ata_port_operations ahci_ops = {
+ .inherits = &sata_pmp_port_ops,
+
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
+ .qc_prep = ahci_qc_prep,
+ .qc_issue = ahci_qc_issue,
+ .qc_fill_rtf = ahci_qc_fill_rtf,
+
+ .freeze = ahci_freeze,
+ .thaw = ahci_thaw,
+ .softreset = ahci_softreset,
+ .hardreset = ahci_hardreset,
+ .postreset = ahci_postreset,
+ .pmp_softreset = ahci_softreset,
+ .error_handler = ahci_error_handler,
+ .post_internal_cmd = ahci_post_internal_cmd,
+ .dev_config = ahci_dev_config,
+
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
+ .pmp_attach = ahci_pmp_attach,
+ .pmp_detach = ahci_pmp_detach,
+
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
+ .em_show = ahci_led_show,
+ .em_store = ahci_led_store,
+ .sw_activity_show = ahci_activity_show,
+ .sw_activity_store = ahci_activity_store,
+#ifdef CONFIG_PM
+ .port_suspend = ahci_port_suspend,
+ .port_resume = ahci_port_resume,
+#endif
+ .port_start = ahci_port_start,
+ .port_stop = ahci_port_stop,
+};
+
+static struct ata_port_operations ahci_vt8251_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_vt8251_hardreset,
+};
+
+#if 0
+static struct ata_port_operations ahci_p5wdh_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_p5wdh_hardreset,
+};
+#endif
+
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
+
+static const struct ata_port_info ahci_port_info[] = {
+ [board_ahci] =
+ {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_vt8251] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_vt8251_ops,
+ },
+ [board_ahci_ign_iferr] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb600] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mv] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_sb700] = /* for SB700 and SB800 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ [board_ahci_mcp65] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [board_ahci_nopmp] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ /* board_ahci_yesncq */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+};
+
+static const struct pci_device_id ahci_pci_tbl[] = {
+ /* Intel */
+ { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
+ { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
+ { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
+ { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
+ { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
+ { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+
+ /* ATI */
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+
+ /* VIA */
+ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
+ { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
+
+ /* NVIDIA */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
+
+ /* SiS */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+
+ /* Marvell */
+ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
+ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
+
+ /* Promise */
+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+
+ /* Generic, PCI class code for AHCI */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
+
+ { } /* terminate list */
+};
+
+
+#if 0
+static struct pci_driver ahci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ahci_pci_tbl,
+ .probe = ahci_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ahci_pci_device_suspend,
+ .resume = ahci_pci_device_resume,
+#endif
+};
+#else
+static struct platform_driver ahci_driver = {
+ .probe = ahci_probe,
+ .remove = __devexit_p(ahci_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+#endif
+
+static int ahci_em_messages = 1;
+module_param(ahci_em_messages, int, 0444);
+/* add other LED protocol types when they become supported */
+MODULE_PARM_DESC(ahci_em_messages,
+ "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
+static inline int ahci_nr_ports(u32 cap)
+{
+ return (cap & 0x1f) + 1;
+}
+
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+ unsigned int port_no)
+{
+#if 0
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+
+ return mmio + 0x100 + (port_no * 0x80);
+}
+
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+ return __ahci_port_base(ap->host, ap->port_no);
+}
+
+static void ahci_enable_ahci(void __iomem *mmio)
+{
+ int i;
+ u32 tmp;
+
+ /* turn on AHCI_EN */
+ tmp = readl(mmio + HOST_CTL);
+ if (tmp & HOST_AHCI_EN)
+ return;
+
+ /* Some controllers need AHCI_EN to be written multiple times.
+ * Try a few times before giving up.
+ */
+ for (i = 0; i < 5; i++) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
+ if (tmp & HOST_AHCI_EN)
+ return;
+ msleep(10);
+ }
+
+ WARN_ON(1);
+}
+
+/**
+ * ahci_save_initial_config - Save and fixup initial config values
+ * @pdev: target PCI device
+ * @hpriv: host private area to store config values
+ *
+ * Some registers containing configuration info might be setup by
+ * BIOS and might be cleared on reset. This function saves the
+ * initial values of those registers into @hpriv such that they
+ * can be restored after controller reset.
+ *
+ * If inconsistent, config values are fixed up by this function.
+ *
+ * LOCKING:
+ * None.
+ */
+#if 0
+static void ahci_save_initial_config(struct pci_dev *pdev,
+ struct ahci_host_priv *hpriv)
+#else
+static void ahci_save_initial_config(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ u8 * base)
+#endif
+{
+#if 0
+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)base;
+#endif
+ u32 cap, port_map;
+ int i;
+#if 0
+ int mv;
+#endif
+
+ /* make sure AHCI mode is enabled before accessing CAP */
+ ahci_enable_ahci(mmio);
+
+ /* Values prefixed with saved_ are written back to host after
+ * reset. Values without are used for driver operation.
+ */
+ hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
+ hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+
+ /* some chips have errata preventing 64bit use */
+ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do 64bit DMA, forcing 32bit\n");
+ cap &= ~HOST_CAP_64;
+ }
+
+ if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do NCQ, turning off CAP_NCQ\n");
+ cap &= ~HOST_CAP_NCQ;
+ }
+
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do PMP, turning off CAP_PMP\n");
+ cap &= ~HOST_CAP_PMP;
+ }
+#if 0
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+ port_map != 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+ port_map, 1);
+ port_map = 1;
+ }
+
+ /*
+ * Temporary Marvell 6145 hack: PATA port presence
+ * is asserted through the standard AHCI port
+ * presence register, as bit 4 (counting from 0)
+ */
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+ if (pdev->device == 0x6121)
+ mv = 0x3;
+ else
+ mv = 0xf;
+ dev_printk(KERN_ERR, &pdev->dev,
+ "MV_AHCI HACK: port_map %x -> %x\n",
+ port_map,
+ port_map & mv);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
+
+ port_map &= mv;
+ }
+#endif
+
+ /* cross check port_map and cap.n_ports */
+ if (port_map) {
+ int map_ports = 0;
+
+ for (i = 0; i < AHCI_MAX_PORTS; i++)
+ if (port_map & (1 << i))
+ map_ports++;
+
+ /* If PI has more ports than n_ports, whine, clear
+ * port_map and let it be generated from n_ports.
+ */
+ if (map_ports > ahci_nr_ports(cap)) {
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "implemented port map (0x%x) contains more "
+ "ports than nr_ports (%u), using nr_ports\n",
+ port_map, ahci_nr_ports(cap));
+ port_map = 0;
+ }
+ }
+
+ /* fabricate port_map from cap.nr_ports */
+ if (!port_map) {
+ port_map = (1 << ahci_nr_ports(cap)) - 1;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "forcing PORTS_IMPL to 0x%x\n", port_map);
+
+ /* write the fixed up value to the PI register */
+ hpriv->saved_port_map = port_map;
+ }
+
+ /* record values to use during operation */
+ hpriv->cap = cap;
+ hpriv->port_map = port_map;
+}
+
+/**
+ * ahci_restore_initial_config - Restore initial config
+ * @host: target ATA host
+ *
+ * Restore initial config stored by ahci_save_initial_config().
+ *
+ * LOCKING:
+ * None.
+ */
+static void ahci_restore_initial_config(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+#if 0
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+
+ writel(hpriv->saved_cap, mmio + HOST_CAP);
+ writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
+}
+
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
+{
+ static const int offset[] = {
+ [SCR_STATUS] = PORT_SCR_STAT,
+ [SCR_CONTROL] = PORT_SCR_CTL,
+ [SCR_ERROR] = PORT_SCR_ERR,
+ [SCR_ACTIVE] = PORT_SCR_ACT,
+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
+ };
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ if (sc_reg < ARRAY_SIZE(offset) &&
+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+ return offset[sc_reg];
+ return 0;
+}
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ *val = readl(port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ writel(val, port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void ahci_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* start DMA */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+}
+
+static int ahci_stop_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_CMD);
+
+ /* check if the HBA is idle */
+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+ return 0;
+
+ /* setting HBA to idle */
+ tmp &= ~PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for engine to stop. This could be as long as 500 msec */
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+ if (tmp & PORT_CMD_LIST_ON)
+ return -EIO;
+
+ return 0;
+}
+
+static void ahci_start_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 tmp;
+
+ /* set FIS registers */
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->cmd_slot_dma >> 16) >> 16,
+ port_mmio + PORT_LST_ADDR_HI);
+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->rx_fis_dma >> 16) >> 16,
+ port_mmio + PORT_FIS_ADDR_HI);
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+
+ /* enable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* flush */
+ readl(port_mmio + PORT_CMD);
+}
+
+static int ahci_stop_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* disable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= ~PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for completion, spec says 500ms, give it 1000 */
+ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
+ PORT_CMD_FIS_ON, 10, 1000);
+ if (tmp & PORT_CMD_FIS_ON)
+ return -EBUSY;
+
+ return 0;
+}
+
+static void ahci_power_up(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+ /* spin up device */
+ if (hpriv->cap & HOST_CAP_SSS) {
+ cmd |= PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+
+ /* wake up link */
+ writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
+}
+
+static void ahci_disable_alpm(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* IPM bits should be disabled by libata-core */
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* disable ALPM and ASP */
+ cmd &= ~PORT_CMD_ASP;
+ cmd &= ~PORT_CMD_ALPE;
+
+ /* force the interface back to active */
+ cmd |= PORT_CMD_ICC_ACTIVE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* wait 10ms to be sure we've come out of any low power state */
+ msleep(10);
+
+ /* clear out any PhyRdy stuff from interrupt status */
+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
+
+ /* go ahead and clean out PhyRdy Change from Serror too */
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+
+ /*
+ * Clear flag to indicate that we should ignore all PhyRdy
+ * state changes
+ */
+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
+
+ /*
+ * Enable interrupts on Phy Ready.
+ */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * don't change the link pm policy - we can be called
+ * just to turn of link pm temporarily
+ */
+}
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 asp;
+
+ /* Make sure the host is capable of link power management */
+ if (!(hpriv->cap & HOST_CAP_ALPM))
+ return -EINVAL;
+
+ switch (policy) {
+ case MAX_PERFORMANCE:
+ case NOT_AVAILABLE:
+ /*
+ * if we came here with NOT_AVAILABLE,
+ * it just means this is the first time we
+ * have tried to enable - default to max performance,
+ * and let the user go to lower power modes on request.
+ */
+ ahci_disable_alpm(ap);
+ return 0;
+ case MIN_POWER:
+ /* configure HBA to enter SLUMBER */
+ asp = PORT_CMD_ASP;
+ break;
+ case MEDIUM_POWER:
+ /* configure HBA to enter PARTIAL */
+ asp = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready interrupts
+ * TBD - Hot plug should be done via polling now, is
+ * that even supported?
+ */
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * Set a flag to indicate that we should ignore all PhyRdy
+ * state changes since these can happen now whenever we
+ * change link state
+ */
+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /*
+ * Set ASP based on Policy
+ */
+ cmd |= asp;
+
+ /*
+ * Setting this bit will instruct the HBA to aggressively
+ * enter a lower power link state when it's appropriate and
+ * based on the value set above for ASP
+ */
+ cmd |= PORT_CMD_ALPE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* IPM bits should be set by libata-core */
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static void ahci_power_down(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd, scontrol;
+
+ if (!(hpriv->cap & HOST_CAP_SSS))
+ return;
+
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
+ scontrol &= ~0xf;
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
+
+ /* then set PxCMD.SUD to 0 */
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+ cmd &= ~PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+}
+#endif
+
+static void ahci_start_port(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ ssize_t rc;
+ int i;
+
+ /* enable FIS reception */
+ ahci_start_fis_rx(ap);
+
+ /* enable DMA */
+ ahci_start_engine(ap);
+
+ /* turn on LEDs */
+ if (ap->flags & ATA_FLAG_EM) {
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+
+ /* EM Transmit bit maybe busy during init */
+ for (i = 0; i < EM_MAX_RETRY; i++) {
+ rc = ahci_transmit_led_message(ap,
+ emp->led_state,
+ 4);
+ if (rc == -EBUSY)
+ msleep(1);
+ else
+ break;
+ }
+ }
+ }
+
+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
+ ata_for_each_link(link, ap, EDGE)
+ ahci_init_sw_activity(link);
+
+}
+
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
+{
+ int rc;
+
+ /* disable DMA */
+ rc = ahci_stop_engine(ap);
+ if (rc) {
+ *emsg = "failed to stop engine";
+ return rc;
+ }
+
+ /* disable FIS reception */
+ rc = ahci_stop_fis_rx(ap);
+ if (rc) {
+ *emsg = "failed stop FIS RX";
+ return rc;
+ }
+
+ return 0;
+}
+
+static int ahci_reset_controller(struct ata_host *host)
+{
+#if 0
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+ u32 tmp;
+
+ /* we must be in AHCI mode, before using anything
+ * AHCI-specific, such as HOST_RESET.
+ */
+ ahci_enable_ahci(mmio);
+
+ /* global controller reset */
+ if (!ahci_skip_host_reset) {
+ tmp = readl(mmio + HOST_CTL);
+ if ((tmp & HOST_RESET) == 0) {
+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ /*
+ * to perform host reset, OS should set HOST_RESET
+ * and poll until this bit is read to be "0".
+ * reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
+ HOST_RESET, 10, 1000);
+
+ if (tmp & HOST_RESET) {
+ dev_printk(KERN_ERR, host->dev,
+ "controller reset failed (0x%x)\n", tmp);
+ return -EIO;
+ }
+
+ /* turn on AHCI mode */
+ ahci_enable_ahci(mmio);
+
+ /* Some registers might be cleared on reset. Restore
+ * initial values.
+ */
+ ahci_restore_initial_config(host);
+ } else
+ dev_printk(KERN_INFO, host->dev,
+ "skipping global host reset\n");
+
+#if 0
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ u16 tmp16;
+
+ /* configure PCS */
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+ tmp16 |= hpriv->port_map;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
+ }
+#endif
+
+ return 0;
+}
+
+static void ahci_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
+ return;
+
+ emp->activity++;
+ if (!timer_pending(&emp->timer))
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
+}
+
+static void ahci_sw_activity_blink(unsigned long arg)
+{
+ struct ata_link *link = (struct ata_link *)arg;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ unsigned long led_message = emp->led_state;
+ u32 activity_led_state;
+ unsigned long flags;
+
+ led_message &= EM_MSG_LED_VALUE;
+ led_message |= ap->port_no | (link->pmp << 8);
+
+ /* check to see if we've had activity. If so,
+ * toggle state of LED and reset timer. If not,
+ * turn LED to desired idle state.
+ */
+ spin_lock_irqsave(ap->lock, flags);
+ if (emp->saved_activity != emp->activity) {
+ emp->saved_activity = emp->activity;
+ /* get the current LED state */
+ activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
+
+ if (activity_led_state)
+ activity_led_state = 0;
+ else
+ activity_led_state = 1;
+
+ /* clear old state */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ /* toggle state */
+ led_message |= (activity_led_state << 16);
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
+ } else {
+ /* switch to idle */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+ if (emp->blink_policy == BLINK_OFF)
+ led_message |= (1 << 16);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_transmit_led_message(ap, led_message, 4);
+}
+
+static void ahci_init_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* init activity stats, setup timer */
+ emp->saved_activity = emp->activity = 0;
+ setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
+
+ /* check our blink policy and set flag for link if it's enabled */
+ if (emp->blink_policy)
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+}
+
+static int ahci_reset_em(struct ata_host *host)
+{
+#if 0
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+ u32 em_ctl;
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
+ return -EINVAL;
+
+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
+ return 0;
+}
+
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+#if 0
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
+#endif
+ u32 em_ctl;
+ u32 message[] = {0, 0};
+ unsigned long flags;
+ int pmp;
+ struct ahci_em_priv *emp;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /*
+ * if we are still busy transmitting a previous message,
+ * do not allow
+ */
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EBUSY;
+ }
+
+ /*
+ * create message header - this is all zero except for
+ * the message size, which is 4 bytes.
+ */
+ message[0] |= (4 << 8);
+
+ /* ignore 0:4 of byte zero, fill in port info yourself */
+ message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
+
+ /* write message to EM_LOC */
+ writel(message[0], mmio + hpriv->em_loc);
+ writel(message[1], mmio + hpriv->em_loc+4);
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ /*
+ * tell hardware to transmit the message
+ */
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ return size;
+}
+
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ int rc = 0;
+
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+ rc += sprintf(buf, "%lx\n", emp->led_state);
+ }
+ return rc;
+}
+
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size)
+{
+ int state;
+ int pmp;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp;
+
+ state = simple_strtoul(buf, NULL, 0);
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ /* mask off the activity bits if we are in sw_activity
+ * mode, user should turn off sw_activity before setting
+ * activity led through em_message
+ */
+ if (emp->blink_policy)
+ state &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ return ahci_transmit_led_message(ap, state, size);
+}
+
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ u32 port_led_state = emp->led_state;
+
+ /* save the desired Activity LED behavior */
+ if (val == OFF) {
+ /* clear LFLAG */
+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
+
+ /* set the LED to OFF */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ } else {
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+ if (val == BLINK_OFF) {
+ /* set LED to ON for idle */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ }
+ }
+ emp->blink_policy = val;
+ return 0;
+}
+
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* display the saved value of activity behavior for this
+ * disk.
+ */
+ return sprintf(buf, "%d\n", emp->blink_policy);
+}
+
+#if 0
+static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
+ int port_no, void __iomem *mmio,
+ void __iomem *port_mmio)
+#else
+static void ahci_port_init(struct platform_device *pdev, struct ata_port *ap,
+ int port_no, void __iomem *mmio,
+ void __iomem *port_mmio)
+#endif
+{
+ const char *emsg = NULL;
+ int rc;
+ u32 tmp;
+
+ /* make sure port is not active */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "%s (%d)\n", emsg, rc);
+
+ /* clear SError */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << port_no, mmio + HOST_IRQ_STAT);
+}
+
+static void ahci_init_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+#if 0
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ struct platform_device *pdev = to_platform_device(host->dev);
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+ int i;
+ void __iomem *port_mmio;
+ u32 tmp;
+ int mv;
+
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+#if 0
+ if (pdev->device == 0x6121)
+ mv = 2;
+ else
+ mv = 4;
+#else
+ mv = 0;
+#endif
+ port_mmio = __ahci_port_base(host, mv);
+
+ writel(0, port_mmio + PORT_IRQ_MASK);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ }
+
+ /* set Timer 1ms, hclk = 200Mhz */
+ /* FIXME: Add auto detect function */
+ printk("CPU clock : %d \n", cns3xxx_cpu_clock());
+ tmp = readl(mmio + HOST_TIMER1MS);
+ printk("*** Timer 1ms: %d(0x%x) ***\n",tmp,tmp);
+ writel(cns3xxx_cpu_clock()*500, mmio + HOST_TIMER1MS);
+ tmp = readl(mmio + HOST_TIMER1MS);
+ printk("*** Set to: %d(0x%x) ***\n",tmp, tmp);
+
+
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ port_mmio = ahci_port_base(ap);
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ahci_port_init(pdev, ap, i, mmio, port_mmio);
+ }
+
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+}
+
+static void ahci_dev_config(struct ata_device *dev)
+{
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
+ dev->max_sectors = 255;
+ ata_dev_printk(dev, KERN_INFO,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ }
+}
+
+static unsigned int ahci_dev_classify(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_taskfile tf;
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_SIG);
+ tf.lbah = (tmp >> 24) & 0xff;
+ tf.lbam = (tmp >> 16) & 0xff;
+ tf.lbal = (tmp >> 8) & 0xff;
+ tf.nsect = (tmp) & 0xff;
+
+ return ata_dev_classify(&tf);
+}
+
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts)
+{
+ dma_addr_t cmd_tbl_dma;
+
+ cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
+
+#if 0
+ pp->cmd_slot[tag].opts = cpu_to_le32(opts);
+#else
+ pp->cmd_slot[tag].opts = opts;
+#endif
+ pp->cmd_slot[tag].status = 0;
+#if 0
+ pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
+#else
+ pp->cmd_slot[tag].tbl_addr = cmd_tbl_dma & 0xffffffff;
+ pp->cmd_slot[tag].tbl_addr_hi = (cmd_tbl_dma >> 16) >> 16;
+#endif
+}
+
+static int ahci_kick_engine(struct ata_port *ap, int force_restart)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 tmp;
+ int busy, rc;
+
+ /* do we need to kick the port? */
+ busy = status & (ATA_BUSY | ATA_DRQ);
+ if (!busy && !force_restart)
+ return 0;
+
+ /* stop engine */
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ goto out_restart;
+
+ /* need to do CLO? */
+ if (!busy) {
+ rc = 0;
+ goto out_restart;
+ }
+
+ if (!(hpriv->cap & HOST_CAP_CLO)) {
+ rc = -EOPNOTSUPP;
+ goto out_restart;
+ }
+
+ /* perform CLO */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_CLO;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ rc = 0;
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
+ if (tmp & PORT_CMD_CLO)
+ rc = -EIO;
+
+ /* restart engine */
+ out_restart:
+ ahci_start_engine(ap);
+ return rc;
+}
+
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
+ struct ata_taskfile *tf, int is_cmd, u16 flags,
+ unsigned long timeout_msec)
+{
+ const u32 cmd_fis_len = 5; /* five dwords */
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u8 *fis = pp->cmd_tbl;
+ u32 tmp;
+
+ /* prep the command */
+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
+
+ /* issue & wait */
+ writel(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (timeout_msec) {
+ tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
+ 1, timeout_msec);
+ if (tmp & 0x1) {
+ ahci_kick_engine(ap, 1);
+ return -EBUSY;
+ }
+ } else
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
+}
+
+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ const char *reason = NULL;
+ unsigned long now, msecs;
+ struct ata_taskfile tf;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ /* prepare for SRST (AHCI-1.1 10.4.1) */
+ rc = ahci_kick_engine(ap, 1);
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_printk(link, KERN_WARNING,
+ "failed to reset engine (errno=%d)\n", rc);
+
+ ata_tf_init(link->device, &tf);
+
+ /* issue the first D2H Register FIS */
+ msecs = 0;
+ now = jiffies;
+ if (time_after(now, deadline))
+ msecs = jiffies_to_msecs(deadline - now);
+
+ tf.ctl |= ATA_SRST;
+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
+ rc = -EIO;
+ reason = "1st FIS failed";
+ goto fail;
+ }
+
+ /* spec says at least 5us, but be generous and sleep for 1ms */
+ msleep(1);
+
+ /* issue the second D2H Register FIS */
+ tf.ctl &= ~ATA_SRST;
+ ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
+
+ /* wait for link to become ready */
+ rc = ata_wait_after_reset(link, deadline, check_ready);
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
+ reason = "device not ready";
+ goto fail;
+ } else
+ *class = ahci_dev_classify(ap);
+
+ DPRINTK("EXIT, class=%u\n", *class);
+ return 0;
+
+ fail:
+ ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
+ return rc;
+}
+
+static int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ DPRINTK("ENTER\n");
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, timing, deadline, &online,
+ ahci_check_ready);
+
+ ahci_start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+ return rc;
+}
+
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ bool online;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+
+ /* vt8251 doesn't clear BSY on signature FIS reception,
+ * request follow-up softreset.
+ */
+ return online ? -EAGAIN : rc;
+}
+
+#if 0
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ int rc;
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline, &online, NULL);
+
+ ahci_start_engine(ap);
+
+ /* The pseudo configuration device on SIMG4726 attached to
+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
+ * hardreset if no device is attached to the first downstream
+ * port && the pseudo device locks up on SRST w/ PMP==0. To
+ * work around this, wait for !BSY only briefly. If BSY isn't
+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
+ *
+ * Wait for two seconds. Devices attached to downstream port
+ * which can't process the following IDENTIFY after this will
+ * have to be reset again. For most cases, this should
+ * suffice while making probing snappish enough.
+ */
+ if (online) {
+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
+ ahci_check_ready);
+ if (rc)
+ ahci_kick_engine(ap, 0);
+ }
+ return rc;
+}
+#endif
+
+static void ahci_postreset(struct ata_link *link, unsigned int *class)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 new_tmp, tmp;
+
+ ata_std_postreset(link, class);
+
+ /* Make sure port's ATAPI bit is set appropriately */
+ new_tmp = tmp = readl(port_mmio + PORT_CMD);
+ if (*class == ATA_DEV_ATAPI)
+ new_tmp |= PORT_CMD_ATAPI;
+ else
+ new_tmp &= ~PORT_CMD_ATAPI;
+ if (new_tmp != tmp) {
+ writel(new_tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ }
+}
+
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
+{
+ struct scatterlist *sg;
+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+ unsigned int si;
+
+ VPRINTK("ENTER\n");
+
+ /*
+ * Next, the S/G list.
+ */
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_addr_t addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+#if 0
+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
+#else
+ ahci_sg[si].addr = addr & 0xffffffff;
+ ahci_sg[si].addr_hi = (addr >> 16) >> 16;
+ ahci_sg[si].flags_size = sg_len - 1;
+#endif
+ }
+
+ return si;
+}
+
+static void ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
+ void *cmd_tbl;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+ unsigned int n_elem;
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+ if (is_atapi) {
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+ }
+
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = ahci_fill_sg(qc, cmd_tbl);
+
+ /*
+ * Fill in command slot information.
+ */
+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+ ahci_fill_cmd_slot(pp, qc->tag, opts);
+}
+
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_eh_info *host_ehi = &ap->link.eh_info;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *active_qc;
+ struct ata_eh_info *active_ehi;
+ u32 serror;
+
+ /* determine active link */
+ ata_for_each_link(link, ap, EDGE)
+ if (ata_link_active(link))
+ break;
+ if (!link)
+ link = &ap->link;
+
+ active_qc = ata_qc_from_tag(ap, link->active_tag);
+ active_ehi = &link->eh_info;
+
+ /* record irq stat */
+ ata_ehi_clear_desc(host_ehi);
+ ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
+
+ /* AHCI needs SError cleared; otherwise, it might lock up */
+ ahci_scr_read(&ap->link, SCR_ERROR, &serror);
+ ahci_scr_write(&ap->link, SCR_ERROR, serror);
+ host_ehi->serror |= serror;
+
+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
+ if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
+ irq_stat &= ~PORT_IRQ_IF_ERR;
+
+ if (irq_stat & PORT_IRQ_TF_ERR) {
+ /* If qc is active, charge it; otherwise, the active
+ * link. There's no active qc on NCQ errors. It will
+ * be determined by EH by reading log page 10h.
+ */
+ if (active_qc)
+ active_qc->err_mask |= AC_ERR_DEV;
+ else
+ active_ehi->err_mask |= AC_ERR_DEV;
+
+ if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
+ host_ehi->serror &= ~SERR_INTERNAL;
+ }
+
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
+ u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
+
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi,
+ "unknown FIS %08x %08x %08x %08x" ,
+ unk[0], unk[1], unk[2], unk[3]);
+ }
+
+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi, "incorrect PMP");
+ }
+
+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
+ host_ehi->err_mask |= AC_ERR_HOST_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(host_ehi, "host bus error");
+ }
+
+ if (irq_stat & PORT_IRQ_IF_ERR) {
+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(host_ehi, "interface fatal error");
+ }
+
+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
+ ata_ehi_hotplugged(host_ehi);
+ ata_ehi_push_desc(host_ehi, "%s",
+ irq_stat & PORT_IRQ_CONNECT ?
+ "connection status changed" : "PHY RDY changed");
+ }
+
+ /* okay, let's hand over to EH */
+
+ if (irq_stat & PORT_IRQ_FREEZE)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void ahci_port_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+ u32 status, qc_active;
+ int rc;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ /* ignore BAD_PMP while resetting */
+ if (unlikely(resetting))
+ status &= ~PORT_IRQ_BAD_PMP;
+
+ /* If we are getting PhyRdy, this is
+ * just a power state change, we should
+ * clear out this, plus the PhyRdy/Comm
+ * Wake bits from Serror
+ */
+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
+ (status & PORT_IRQ_PHYRDY)) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ }
+
+ if (unlikely(status & PORT_IRQ_ERROR)) {
+ ahci_error_intr(ap, status);
+ return;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS) {
+ /* If SNotification is available, leave notification
+ * handling to sata_async_notification(). If not,
+ * emulate it by snooping SDB FIS RX area.
+ *
+ * Snooping FIS RX area is probably cheaper than
+ * poking SNotification but some constrollers which
+ * implement SNotification, ICH9 for example, don't
+ * store AN SDB FIS into receive area.
+ */
+ if (hpriv->cap & HOST_CAP_SNTF)
+ sata_async_notification(ap);
+ else {
+ /* If the 'N' bit in word 0 of the FIS is set,
+ * we just received asynchronous notification.
+ * Tell libata about it.
+ */
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+#if 0
+ u32 f0 = le32_to_cpu(f[0]);
+#else
+ u32 f0 = f[0];
+#endif
+
+ if (f0 & (1 << 15))
+ sata_async_notification(ap);
+ }
+ }
+
+ /* pp->active_link is valid iff any command is in flight */
+ if (ap->qc_active && pp->active_link->sactive)
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ else
+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+
+ rc = ata_qc_complete_multiple(ap, qc_active);
+
+ /* while resetting, invalid completions are expected */
+ if (unlikely(rc < 0 && !resetting)) {
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
+ }
+}
+
+static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int i, handled = 0;
+ void __iomem *mmio;
+ u32 irq_stat, irq_masked;
+
+ VPRINTK("ENTER\n");
+
+ hpriv = host->private_data;
+#if 0
+ mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ if (!(irq_masked & (1 << i)))
+ continue;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_port_intr(ap);
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host->dev,
+ "interrupt on disabled port %u\n", i);
+ }
+
+ handled = 1;
+ }
+
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+ spin_unlock(&host->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* Keep track of the currently active link. It will be used
+ * in completion path to determine whether NCQ phase is in
+ * progress.
+ */
+ pp->active_link = qc->dev->link;
+
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
+
+ ahci_sw_activity(qc->dev->link);
+
+ return 0;
+}
+
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+ ata_tf_from_fis(d2h_fis, &qc->result_tf);
+ return true;
+}
+
+static void ahci_freeze(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ /* turn IRQ off */
+ writel(0, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_thaw(struct ata_port *ap)
+{
+#if 0
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
+#endif
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* clear IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
+
+ /* turn IRQ back on */
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ /* restart engine */
+ ahci_stop_engine(ap);
+ ahci_start_engine(ap);
+ }
+
+ sata_pmp_error_handler(ap);
+}
+
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ ahci_kick_engine(ap, 1);
+}
+
+static void ahci_pmp_attach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ pp->intr_mask |= PORT_IRQ_BAD_PMP;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_pmp_detach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd &= ~PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static int ahci_port_resume(struct ata_port *ap)
+{
+ ahci_power_up(ap);
+ ahci_start_port(ap);
+
+ if (sata_pmp_attached(ap))
+ ahci_pmp_attach(ap);
+ else
+ ahci_pmp_detach(ap);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+ const char *emsg = NULL;
+ int rc;
+
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc == 0)
+ ahci_power_down(ap);
+ else {
+ ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+ ahci_start_port(ap);
+ }
+
+ return rc;
+}
+
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+ u32 ctl;
+
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ if (mesg.event & PM_EVENT_SLEEP) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int ahci_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+static int ahci_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct ahci_port_priv *pp;
+ void *mem;
+ dma_addr_t mem_dma;
+
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
+ GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = mem;
+ pp->cmd_slot_dma = mem_dma;
+
+ mem += AHCI_CMD_SLOT_SZ;
+ mem_dma += AHCI_CMD_SLOT_SZ;
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = mem;
+ pp->rx_fis_dma = mem_dma;
+
+ mem += AHCI_RX_FIS_SZ;
+ mem_dma += AHCI_RX_FIS_SZ;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ pp->cmd_tbl_dma = mem_dma;
+
+ /*
+ * Save off initial list of interrupts to be enabled.
+ * This could be changed later
+ */
+ pp->intr_mask = DEF_PORT_IRQ;
+
+ ap->private_data = pp;
+
+ /* engage engines, captain */
+ return ahci_port_resume(ap);
+}
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+ const char *emsg = NULL;
+ int rc;
+
+ /* de-initialize port */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
+}
+
+#if 0
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
+{
+ int rc;
+
+ if (using_dac &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return 0;
+}
+#endif
+
+static void ahci_print_info(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+#if 0
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+#else
+ struct platform_device *pdev = to_platform_device(host->dev);
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
+#endif
+ u32 vers, cap, impl, speed;
+ const char *speed_s;
+#if 0
+ u16 cc;
+#endif
+ const char *scc_s;
+
+ vers = readl(mmio + HOST_VERSION);
+ cap = hpriv->cap;
+ impl = hpriv->port_map;
+
+ speed = (cap >> 20) & 0xf;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
+ else
+ speed_s = "?";
+
+#if 0
+ pci_read_config_word(pdev, 0x0a, &cc);
+ if (cc == PCI_CLASS_STORAGE_IDE)
+ scc_s = "IDE";
+ else if (cc == PCI_CLASS_STORAGE_SATA)
+ scc_s = "SATA";
+ else if (cc == PCI_CLASS_STORAGE_RAID)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+#else
+ scc_s = "SATA";
+#endif
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
+ ,
+
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+
+ ((cap >> 8) & 0x1f) + 1,
+ (cap & 0x1f) + 1,
+ speed_s,
+ impl,
+ scc_s);
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "flags: "
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s\n"
+ ,
+
+ cap & (1 << 31) ? "64bit " : "",
+ cap & (1 << 30) ? "ncq " : "",
+ cap & (1 << 29) ? "sntf " : "",
+ cap & (1 << 28) ? "ilck " : "",
+ cap & (1 << 27) ? "stag " : "",
+ cap & (1 << 26) ? "pm " : "",
+ cap & (1 << 25) ? "led " : "",
+
+ cap & (1 << 24) ? "clo " : "",
+ cap & (1 << 19) ? "nz " : "",
+ cap & (1 << 18) ? "only " : "",
+ cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 15) ? "pio " : "",
+ cap & (1 << 14) ? "slum " : "",
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 6) ? "ems ": ""
+ );
+}
+
+#if 0
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
+ * support PMP and the 4726 either directly exports the device
+ * attached to the first downstream port or acts as a hardware storage
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
+ * other configuration).
+ *
+ * When there's no device attached to the first downstream port of the
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
+ * configure the 4726. However, ATA emulation of the device is very
+ * lame. It doesn't send signature D2H Reg FIS after the initial
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
+ *
+ * The following function works around the problem by always using
+ * hardreset on the port and not depending on receiving signature FIS
+ * afterward. If signature FIS isn't received soon, ATA class is
+ * assumed without follow-up softreset.
+ */
+static void ahci_p5wdh_workaround(struct ata_host *host)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ .ident = "P5W DH Deluxe",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "ASUSTEK COMPUTER INC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
+ },
+ },
+ { }
+ };
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
+ dmi_check_system(sysids)) {
+ struct ata_port *ap = host->ports[1];
+
+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
+ "Deluxe on-board SIMG4726 workaround\n");
+
+ ap->ops = &ahci_p5wdh_ops;
+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
+ }
+}
+
+/*
+ * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older
+ * BIOS. The oldest version known to be broken is 0901 and working is
+ * 1501 which was released on 2007-10-26. Force 32bit DMA on anything
+ * older than 1501. Please read bko#9412 for more info.
+ */
+static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ {
+ .ident = "ASUS M2A-VM",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
+ },
+ },
+ { }
+ };
+ const char *cutoff_mmdd = "10/26";
+ const char *date;
+ int year;
+
+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
+ !dmi_check_system(sysids))
+ return false;
+
+ /*
+ * Argh.... both version and date are free form strings.
+ * Let's hope they're using the same date format across
+ * different versions.
+ */
+ date = dmi_get_system_info(DMI_BIOS_DATE);
+ year = dmi_get_year(DMI_BIOS_DATE);
+ if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' &&
+ (year > 2007 ||
+ (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0)))
+ return false;
+
+ dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, "
+ "forcing 32bit DMA, update BIOS\n");
+
+ return true;
+}
+
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id broken_systems[] = {
+ {
+ .ident = "HP Compaq nx6310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+ {
+ .ident = "HP Compaq 6720s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
+
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+ if (dmi) {
+ unsigned long slot = (unsigned long)dmi->driver_data;
+ /* apply the quirk only to on-board controllers */
+ return slot == PCI_SLOT(pdev->devfn);
+ }
+
+ return false;
+}
+
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+ * to the harddisk doesn't become online after
+ * resuming from STR. Warn and fail suspend.
+ */
+ {
+ .ident = "dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv4 Notebook PC"),
+ },
+ .driver_data = "F.30", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv5 Notebook PC"),
+ },
+ .driver_data = "F.16", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv6 Notebook PC"),
+ },
+ .driver_data = "F.21", /* cutoff BIOS version */
+ },
+ {
+ .ident = "HDX18",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP HDX18 Notebook PC"),
+ },
+ .driver_data = "F.23", /* cutoff BIOS version */
+ },
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ const char *ver;
+
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+ return false;
+
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
+#endif
+static int ahci_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+ return 0;
+}
+
+#if 0
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+#else
+static int __init ahci_probe(struct platform_device *pdev)
+#endif
+{
+ static int printed_version;
+#if 0
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
+#else
+ struct ata_port_info pi = ahci_port_info[board_ahci];
+#endif
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ int n_ports, i, rc;
+ struct resource *res;
+ u8 *base = NULL;
+
+ VPRINTK("ENTER\n");
+
+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+#if 0
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
+ /* acquire resources */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
+ u8 map;
+
+ /* ICH6s share the same PCI ID for both piix and ahci
+ * modes. Enabling ahci mode while MAP indicates
+ * combined mode is a bad idea. Yield to ata_piix.
+ */
+ pci_read_config_byte(pdev, ICH_MAP, &map);
+ if (map & 0x3) {
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
+ "combined mode, can't enable AHCI mode\n");
+ return -ENODEV;
+ }
+ }
+#endif
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+#if 0
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
+ /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
+ if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
+ hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
+
+ /* apply ASUS M2A_VM quirk */
+ if (ahci_asus_m2a_vm_32bit_only(pdev))
+ hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+
+ if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
+ pci_enable_msi(pdev);
+#endif
+
+ /* Cavium CNS3XXX Initial */
+ /* Get SATA register base address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no reg addr\n");
+ return -ENODEV;
+ }
+
+ /* ioremap SATA registers */
+ base = devm_ioremap(&pdev->dev, res->start, res->end - res->start + 1);
+
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed for 0x%x\n", res->start);
+ return -ENODEV;
+ }
+
+#if 0
+ /* reset PHY test chip */
+ printk("*** Reset PHY ***\n");
+ CNS3XXX_MISC_REGISTER |= 0xF;
+ mdelay(100);
+
+ printk("%s %d, base:0x%x\n",__FUNCTION__,__LINE__,(u32)base);
+
+ /* set PI first */
+ printk("*** Manually set PI ***\n");
+ writel(0x1, (void __iomem *)base + HOST_PORTS_IMPL);
+ printk("*** Now PI is: 0x%x ***\n",readl((void __iomem *)base + HOST_PORTS_IMPL));
+#endif
+
+
+
+
+ /* save initial config */
+#if 0
+ ahci_save_initial_config(pdev, hpriv);
+#else
+ ahci_save_initial_config(pdev, hpriv, base);
+#endif
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
+ u8 messages;
+#if 0
+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+#else
+ void __iomem *mmio = (void __iomem *)base;
+#endif
+ u32 em_loc = readl(mmio + HOST_EM_LOC);
+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+ messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
+
+ /* we only support LED message type right now */
+ if ((messages & 0x01) && (ahci_em_messages == 1)) {
+ /* store em_loc */
+ hpriv->em_loc = ((em_loc >> 16) * 4);
+ pi.flags |= ATA_FLAG_EM;
+ if (!(em_ctl & EM_CTL_ALHD))
+ pi.flags |= ATA_FLAG_SW_ACTIVITY;
+ }
+ }
+
+#if 0
+ if (ahci_broken_system_poweroff(pdev)) {
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+ dev_info(&pdev->dev,
+ "quirky BIOS, skipping spindown on poweroff\n");
+ }
+
+ if (ahci_broken_suspend(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ }
+
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+#endif
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+#if 0
+ host->iomap = pcim_iomap_table(pdev);
+#else
+ host->iomap = (void __iomem *)base;
+#endif
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+#if 0
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+ 0x100 + ap->port_no * 0x80, "port");
+#else
+ ata_port_desc(ap, "%s %s%llu@0x%llx", "ahci bar", "m",
+ (long long)(res->end - res->start) + 1, (long long)res->start);
+ ata_port_desc(ap, "%s 0x%llx", "port",
+ (long long)res->start + 0x100 + ap->port_no * 0x80);
+#endif
+
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = ahci_em_messages;
+
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+#if 0
+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
+ ahci_p5wdh_workaround(host);
+
+ /* initialize adapter */
+ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
+ if (rc)
+ return rc;
+#endif
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ ahci_print_info(host);
+
+#if 0
+ pci_set_master(pdev);
+#endif
+
+
+
+#if 0
+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_sht);
+#else
+ /* Get SATA port interrupt number */
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no SATA irq\n");
+ return -ENODEV;
+ }
+
+ return ata_host_activate(host, res->start, ahci_interrupt, IRQF_SHARED,
+ &ahci_sht);
+
+
+#endif
+}
+
+
+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
+static void ahci_phy_init(void){
+
+ u32 u32tmp;
+
+
+ u32tmp = MISC_SATA_POWER_MODE;
+ u32tmp |= 0x1<< 16; // Disable SATA PHY 0 from SLUMBER Mode
+ u32tmp |= 0x1<< 17; // Disable SATA PHY 1 from SLUMBER Mode
+ MISC_SATA_POWER_MODE = u32tmp;
+
+ /* Enable SATA PHY */
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+ /* Enable SATA Clock */
+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+ /* De-Asscer SATA Reset */
+ u32tmp = PM_SOFT_RST_REG;
+ u32tmp |= 0x1 << PM_SOFT_RST_REG_OFFST_SATA;
+ PM_SOFT_RST_REG = u32tmp;
+}
+#endif
+
+
+
+static int __init ahci_init(void)
+{
+#if 0
+ return pci_register_driver(&ahci_pci_driver);
+#else
+ printk("CNS3XXX AHCI SATA low-level driver\n");
+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
+ ahci_phy_init();
+#endif
+ return platform_driver_register(&ahci_driver);
+#endif
+}
+
+static void __exit ahci_exit(void)
+{
+#if 0
+ pci_unregister_driver(&ahci_pci_driver);
+#else
+ platform_driver_unregister(&ahci_driver);
+#endif
+}
+
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("AHCI SATA low-level driver");
+MODULE_LICENSE("GPL");
+#if 0
+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+#endif
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ahci_init);
+module_exit(ahci_exit);
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -47,6 +47,14 @@ config SATA_PMP
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
+config SATA_CNS3XXX_AHCI
+ tristate "Cavium CNS3XXX AHCI SATA support"
+ help
+ This option enables support for AHCI Serial ATA support for Cavium CNS3XXX.
+
+ If unsure, say N.
+
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3096,12 +3096,22 @@ int ata_scsi_queuecmd(struct scsi_cmnd *
struct scsi_device *scsidev = cmd->device;
struct Scsi_Host *shost = scsidev->host;
int rc = 0;
-
+#ifdef CONFIG_SMP
+ u32 flags;
+ local_save_flags(flags);
+#endif
ap = ata_shost_to_port(shost);
spin_unlock(shost->host_lock);
+#ifndef CONFIG_SMP
spin_lock(ap->lock);
-
+#else
+ while(!spin_trylock(ap->lock)){
+ if(!irqs_disabled()) continue;
+ local_irq_enable();
+ local_irq_restore(flags);
+ }
+#endif
ata_scsi_dump_cdb(ap, cmd);
dev = ata_scsi_find_dev(ap, scsidev);
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -893,6 +893,9 @@ static void ata_pio_sector(struct ata_qu
do_write);
}
+ if (!do_write)
+ flush_dcache_page(page);
+
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_ATA) += libata.o
+obj-$(CONFIG_SATA_CNS3XXX_AHCI) += cns3xxx_ahci.o
obj-$(CONFIG_SATA_AHCI) += ahci.o
obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
View Git Blame Copy Permalink