mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-28 23:32:50 +02:00
57ffcdaccd
This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
141 lines
2.6 KiB
Bash
Executable File
141 lines
2.6 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
. /etc/functions.sh
|
|
. /lib/ramips.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
if [ ! -x /usr/sbin/maccalc ]; then
|
|
echo "$0: maccalc not found!"
|
|
return
|
|
fi
|
|
|
|
ramips_setup_interfaces()
|
|
{
|
|
local board="$1"
|
|
|
|
ucidef_set_interface_loopback
|
|
|
|
case $board in
|
|
all0256n)
|
|
ucidef_set_interface_lan "eth0.1"
|
|
;;
|
|
|
|
argus-atp52b | \
|
|
b2c | \
|
|
nw718 | \
|
|
w502u)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
;;
|
|
|
|
f5d8235-v1 | \
|
|
rt-n15)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
ucidef_add_switch "rtl8366s" "1" "1"
|
|
ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
|
|
ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
|
|
;;
|
|
|
|
f5d8235-v2 | \
|
|
wl-351)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
ucidef_add_switch "rtl8366rb" "1" "1"
|
|
ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
|
|
ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
|
|
;;
|
|
|
|
wcr-150gn)
|
|
ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
|
|
;;
|
|
|
|
wli-tx4-ag300n)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
|
|
*)
|
|
RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
|
|
if [ -n "${RT3X5X}" ]; then
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
else
|
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
|
fi
|
|
;;
|
|
esac
|
|
}
|
|
|
|
ramips_setup_macs()
|
|
{
|
|
local board="$1"
|
|
local lan_mac=""
|
|
local wan_mac=""
|
|
|
|
case $board in
|
|
all0256n)
|
|
lan_mac=$(ramips_get_mac_binary factory 40)
|
|
;;
|
|
|
|
argus-atp52b | \
|
|
b2c | \
|
|
f5d8235-v1 | \
|
|
nw718 | \
|
|
rt-n15 | \
|
|
wl-351)
|
|
lan_mac=$(ramips_get_mac_binary factory 4)
|
|
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
|
|
;;
|
|
|
|
dir-300-b1 |\
|
|
dir-300-b2 |\
|
|
dir-600-b1)
|
|
lan_mac=$(ramips_get_mac_binary devdata 16388)
|
|
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
|
|
;;
|
|
|
|
esr-9753 | \
|
|
nbg-419n)
|
|
lan_mac=$(ramips_get_mac_binary factory 4)
|
|
wan_mac=$(ramips_get_mac_binary factory 40)
|
|
;;
|
|
|
|
f5d8235-v2)
|
|
lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
|
|
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
|
|
;;
|
|
|
|
w502u)
|
|
lan_mac=$(ramips_get_mac_binary factory 40)
|
|
wan_mac=$(ramips_get_mac_binary factory 46)
|
|
;;
|
|
|
|
wcr-150gn)
|
|
lan_mac=$(ramips_get_mac_binary factory 4)
|
|
wan_mac=$(ramips_get_mac_binary factory 40)
|
|
;;
|
|
|
|
wl341v3)
|
|
lan_mac=$(ramips_get_mac_binary board-nvram 65440)
|
|
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
|
|
;;
|
|
|
|
wli-tx4-ag300n)
|
|
lan_mac=$(ramips_get_mac_binary factory 4)
|
|
;;
|
|
|
|
esac
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
|
|
}
|
|
|
|
[ -e /etc/config/network ] && exit 0
|
|
|
|
touch /etc/config/network
|
|
|
|
board=$(ramips_board_name)
|
|
|
|
ramips_setup_interfaces $board
|
|
ramips_setup_macs $board
|
|
|
|
uci commit network
|
|
|
|
exit 0
|