mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-29 18:43:55 +02:00
fc54b9bf15
(stable-branch of Openmoko) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73
166 lines
5.6 KiB
Diff
166 lines
5.6 KiB
Diff
From eee43706c5969f5d99096dddefae3be0c41a6ed2 Mon Sep 17 00:00:00 2001
|
|
From: Harald Welte <laforge@gnumonks.org>
|
|
Date: Thu, 13 Nov 2008 08:29:11 +0000
|
|
Subject: [PATCH] [ARM] S3C24xx: Add preliminary E-TEN glofiish M800 support
|
|
|
|
This patch adds preliminary support for the M800. If booted
|
|
through haret, the system has the following working components:
|
|
* NAND read support
|
|
* framebuffer / LCM (no jbt6k74 power management yet)
|
|
* USB device controller (incl. Pullup)
|
|
* microSD card (incl. card-detect)
|
|
* backlight brightness control (using gta01-bl.c)
|
|
* input event device for power, camera and record button
|
|
* input event device for keyboard slide event
|
|
* bluetooth power control (using gta01-pm-bt)
|
|
|
|
Many things are still missing, like
|
|
* NAND write support
|
|
* GPS power control
|
|
* GSM/3G modem interface
|
|
* capsense buttons, joystick and querty-keyboard
|
|
* camera
|
|
* audio
|
|
|
|
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
---
|
|
arch/arm/mach-s3c2440/Kconfig | 7 +++++++
|
|
arch/arm/mach-s3c2440/Makefile | 1 +
|
|
arch/arm/plat-s3c24xx/neo1973_pm_bt.c | 17 +++++++++++++++++
|
|
arch/arm/tools/mach-types | 1 +
|
|
drivers/input/keyboard/Kconfig | 11 +++++++++++
|
|
drivers/input/keyboard/Makefile | 1 +
|
|
drivers/mtd/nand/nand_bbt.c | 2 ++
|
|
7 files changed, 40 insertions(+), 0 deletions(-)
|
|
|
|
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
|
|
index 4a211d8..4c3b6b2 100644
|
|
--- a/arch/arm/mach-s3c2440/Kconfig
|
|
+++ b/arch/arm/mach-s3c2440/Kconfig
|
|
@@ -98,6 +98,13 @@ config NEO1973_GTA02_2440
|
|
Say Y here if you are using an early hardware revision
|
|
of the FIC/Openmoko Neo1973 GTA02 GSM Phone.
|
|
|
|
+config MACH_M800
|
|
+ bool "E-TEN glofiish M800/X800"
|
|
+ select CPU_S3C2442
|
|
+ help
|
|
+ Say Y here if you are using the E-TEN glofiish M800/X800.
|
|
+
|
|
+
|
|
endmenu
|
|
|
|
#source "arch/arm/mach-s3c2440/camera/Kconfig"
|
|
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
|
|
index e3ca9e3..8617820 100644
|
|
--- a/arch/arm/mach-s3c2440/Makefile
|
|
+++ b/arch/arm/mach-s3c2440/Makefile
|
|
@@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
|
|
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
|
|
obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o
|
|
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
|
|
+obj-$(CONFIG_MACH_M800) += mach-glofiish.o
|
|
diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
|
|
index dfc9ae8..dcb251b 100644
|
|
--- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
|
|
+++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
|
|
@@ -30,6 +30,9 @@
|
|
#include <linux/pcf50633.h>
|
|
#endif
|
|
|
|
+#ifdef CONFIG_MACH_M800
|
|
+#include <asm/arch/glofiish.h>
|
|
+#endif
|
|
|
|
#define DRVMSG "FIC Neo1973 Bluetooth Power Management"
|
|
|
|
@@ -56,6 +59,14 @@ static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
|
|
break;
|
|
#endif /* CONFIG_MACH_NEO1973_GTA02 */
|
|
|
|
+#ifdef CONFIG_MACH_M800
|
|
+ case MACH_TYPE_M800:
|
|
+ if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) &&
|
|
+ s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2))
|
|
+ goto out_1;
|
|
+ break;
|
|
+#endif /* CONFIG_MACH_M800 */
|
|
+
|
|
}
|
|
} else if (!strcmp(attr->attr.name, "reset")) {
|
|
switch (machine_arch_type) {
|
|
@@ -121,6 +132,12 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
|
|
break;
|
|
#endif /* CONFIG_MACH_NEO1973_GTA02 */
|
|
|
|
+#ifdef CONFIG_MACH_M800
|
|
+ case MACH_TYPE_M800:
|
|
+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on);
|
|
+ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on);
|
|
+ break;
|
|
+#endif /* CONFIG_MACH_M800 */
|
|
}
|
|
} else if (!strcmp(attr->attr.name, "reset")) {
|
|
/* reset is low-active, so we need to invert */
|
|
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
|
|
index 0a9a5e7..2578091 100644
|
|
--- a/arch/arm/tools/mach-types
|
|
+++ b/arch/arm/tools/mach-types
|
|
@@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358
|
|
csb726 MACH_CSB726 CSB726 1359
|
|
tik27 MACH_TIK27 TIK27 1360
|
|
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
|
|
+m800 MACH_M800 M800 1772
|
|
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
|
|
index a61ca45..68a893f 100644
|
|
--- a/drivers/input/keyboard/Kconfig
|
|
+++ b/drivers/input/keyboard/Kconfig
|
|
@@ -304,6 +304,17 @@ config KEYBOARD_NEO1973
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called neo1973kbd.
|
|
|
|
+config KEYBOARD_M800
|
|
+ tristate "E-TEN glofiish M800 buttons"
|
|
+ depends on MACH_M800
|
|
+ default y
|
|
+ help
|
|
+ Say Y here to enable the buttons on the E-TEN glofiish
|
|
+ M800 GSM phone.
|
|
+
|
|
+ To compile this driver as a module, choose M here: the
|
|
+ module will be called m800kbd.
|
|
+
|
|
config KEYBOARD_QT2410
|
|
tristate "QT2410 buttons"
|
|
depends on MACH_QT2410
|
|
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
|
|
index 34bfc33..005a050 100644
|
|
--- a/drivers/input/keyboard/Makefile
|
|
+++ b/drivers/input/keyboard/Makefile
|
|
@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
|
|
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
|
|
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
|
|
obj-$(CONFIG_KEYBOARD_NEO1973) += neo1973kbd.o
|
|
+obj-$(CONFIG_KEYBOARD_M800) += m800kbd.o
|
|
obj-$(CONFIG_KEYBOARD_QT2410) += qt2410kbd.o
|
|
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
|
|
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
|
|
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
|
|
index 5e121ce..7e20816 100644
|
|
--- a/drivers/mtd/nand/nand_bbt.c
|
|
+++ b/drivers/mtd/nand/nand_bbt.c
|
|
@@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
|
|
|
|
if (ret) {
|
|
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
|
|
+#if 0
|
|
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
|
|
i >> 1, (unsigned int)from);
|
|
+#endif
|
|
mtd->ecc_stats.badblocks++;
|
|
}
|
|
|
|
--
|
|
1.5.6.5
|
|
|