mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 13:35:21 +02:00
791 lines
19 KiB
C
Executable File
791 lines
19 KiB
C
Executable File
/*
|
|
* linux/drivers/video/jzlcd.h -- Ingenic On-Chip LCD frame buffer device
|
|
*
|
|
* Copyright (C) 2005-2007, Ingenic Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#ifndef __JZLCD_H__
|
|
#define __JZLCD_H__
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define NR_PALETTE 256
|
|
|
|
struct lcd_desc{
|
|
unsigned int next_desc; /* LCDDAx */
|
|
unsigned int databuf; /* LCDSAx */
|
|
unsigned int frame_id; /* LCDFIDx */
|
|
unsigned int cmd; /* LCDCMDx */
|
|
};
|
|
|
|
#define MODE_MASK 0x0f
|
|
#define MODE_TFT_GEN 0x00
|
|
#define MODE_TFT_SHARP 0x01
|
|
#define MODE_TFT_CASIO 0x02
|
|
#define MODE_TFT_SAMSUNG 0x03
|
|
#define MODE_CCIR656_NONINT 0x04
|
|
#define MODE_CCIR656_INT 0x05
|
|
#define MODE_STN_COLOR_SINGLE 0x08
|
|
#define MODE_STN_MONO_SINGLE 0x09
|
|
#define MODE_STN_COLOR_DUAL 0x0a
|
|
#define MODE_STN_MONO_DUAL 0x0b
|
|
#define MODE_8BIT_SERIAL_TFT 0x0c
|
|
|
|
#define MODE_TFT_18BIT (1<<7)
|
|
|
|
#define STN_DAT_PIN1 (0x00 << 4)
|
|
#define STN_DAT_PIN2 (0x01 << 4)
|
|
#define STN_DAT_PIN4 (0x02 << 4)
|
|
#define STN_DAT_PIN8 (0x03 << 4)
|
|
#define STN_DAT_PINMASK STN_DAT_PIN8
|
|
|
|
#define STFT_PSHI (1 << 15)
|
|
#define STFT_CLSHI (1 << 14)
|
|
#define STFT_SPLHI (1 << 13)
|
|
#define STFT_REVHI (1 << 12)
|
|
|
|
#define SYNC_MASTER (0 << 16)
|
|
#define SYNC_SLAVE (1 << 16)
|
|
|
|
#define DE_P (0 << 9)
|
|
#define DE_N (1 << 9)
|
|
|
|
#define PCLK_P (0 << 10)
|
|
#define PCLK_N (1 << 10)
|
|
|
|
#define HSYNC_P (0 << 11)
|
|
#define HSYNC_N (1 << 11)
|
|
|
|
#define VSYNC_P (0 << 8)
|
|
#define VSYNC_N (1 << 8)
|
|
|
|
#define DATA_NORMAL (0 << 17)
|
|
#define DATA_INVERSE (1 << 17)
|
|
|
|
|
|
/* Jz LCDFB supported I/O controls. */
|
|
#define FBIOSETBACKLIGHT 0x4688
|
|
#define FBIODISPON 0x4689
|
|
#define FBIODISPOFF 0x468a
|
|
#define FBIORESET 0x468b
|
|
#define FBIOPRINT_REGS 0x468c
|
|
#define FBIOGETBUFADDRS 0x468d
|
|
#define FBIOROTATE 0x46a0 /* rotated fb */
|
|
|
|
struct jz_lcd_buffer_addrs_t {
|
|
int fb_num;
|
|
unsigned int lcd_desc_phys_addr;
|
|
unsigned int fb_phys_addr[CONFIG_JZLCD_FRAMEBUFFER_MAX];
|
|
};
|
|
|
|
|
|
/*
|
|
* LCD panel specific definition
|
|
*/
|
|
#if defined(CONFIG_JZLCD_TRULY_TFTG320240DTSW)
|
|
|
|
#if defined(CONFIG_JZ4730_PMP)
|
|
#define LCD_RESET_PIN 63
|
|
#endif
|
|
|
|
#define __lcd_special_on() \
|
|
do { \
|
|
__gpio_set_pin(LCD_RESET_PIN); \
|
|
__gpio_as_output(LCD_RESET_PIN); \
|
|
__gpio_clear_pin(LCD_RESET_PIN); \
|
|
udelay(100); \
|
|
__gpio_set_pin(LCD_RESET_PIN); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZLCD_TRULY_TFTG320240DTSW */
|
|
|
|
#if defined(CONFIG_JZLCD_SAMSUNG_LTV350QVF04)
|
|
|
|
#if defined(CONFIG_JZ4730_FPRINT)
|
|
#define PortSDI 60
|
|
#define PortSCL 61
|
|
#define PortCS 62
|
|
#define PortRST 63
|
|
#define PortSht 64
|
|
#endif
|
|
|
|
#if defined(CONFIG_JZ4730_GPS)
|
|
#define PortSDI 74
|
|
#define PortSCL 72
|
|
#define PortCS 73
|
|
#define PortRST 60
|
|
#define PortSht 59
|
|
#endif
|
|
|
|
#ifndef PortSDI
|
|
#define PortSDI 0
|
|
#endif
|
|
#ifndef PortSCL
|
|
#define PortSCL 0
|
|
#endif
|
|
#ifndef PortCS
|
|
#define PortCS 0
|
|
#endif
|
|
#ifndef PortRST
|
|
#define PortRST 0
|
|
#endif
|
|
#ifndef PortSht
|
|
#define PortSht 0
|
|
#endif
|
|
|
|
#define __lcd_special_pin_init() \
|
|
do { \
|
|
__gpio_as_output(PortSDI); /* SDI */\
|
|
__gpio_as_output(PortSCL); /* SCL */ \
|
|
__gpio_as_output(PortCS); /* CS */ \
|
|
__gpio_as_output(PortRST); /* Reset */ \
|
|
__gpio_as_output(PortSht); /* Shut Down # */ \
|
|
__gpio_set_pin(PortCS); \
|
|
__gpio_set_pin(PortSCL); \
|
|
__gpio_set_pin(PortSDI); \
|
|
} while (0)
|
|
|
|
#define __spi_out(val) \
|
|
do { \
|
|
int __i__; \
|
|
unsigned int _t_ = (val); \
|
|
__gpio_clear_pin(PortCS); \
|
|
udelay(25); \
|
|
for (__i__ = 0; __i__ < 24; __i__++ ) { \
|
|
__gpio_clear_pin(PortSCL); \
|
|
if (_t_ & 0x800000) \
|
|
__gpio_set_pin(PortSDI); \
|
|
else \
|
|
__gpio_clear_pin(PortSDI); \
|
|
_t_ <<= 1; \
|
|
udelay(25); \
|
|
__gpio_set_pin(PortSCL); \
|
|
udelay(25); \
|
|
} \
|
|
__gpio_set_pin(PortCS); \
|
|
udelay(25); \
|
|
__gpio_set_pin(PortSDI); \
|
|
udelay(25); \
|
|
__gpio_set_pin(PortSCL); \
|
|
} while (0)
|
|
|
|
#define __spi_id_op_data(rs, rw, val) \
|
|
__spi_out((0x1d<<18)|((rs)<<17)|((rw)<<16)|(val))
|
|
|
|
#define __spi_write_reg(reg, val) \
|
|
do { \
|
|
__spi_id_op_data(0, 0, (reg)); \
|
|
__spi_id_op_data(1, 0, (val)); \
|
|
} while (0)
|
|
|
|
#define __lcd_special_on() \
|
|
do { \
|
|
__gpio_set_pin(PortSht); \
|
|
__gpio_clear_pin(PortRST); \
|
|
mdelay(10); \
|
|
__gpio_set_pin(PortRST); \
|
|
mdelay(1); \
|
|
__spi_write_reg(0x09, 0); \
|
|
mdelay(10); \
|
|
__spi_write_reg(0x09, 0x4000); \
|
|
__spi_write_reg(0x0a, 0x2000); \
|
|
mdelay(40); \
|
|
__spi_write_reg(0x09, 0x4055); \
|
|
mdelay(50); \
|
|
__spi_write_reg(0x01, 0x409d); \
|
|
__spi_write_reg(0x02, 0x0204); \
|
|
__spi_write_reg(0x03, 0x0100); \
|
|
__spi_write_reg(0x04, 0x3000); \
|
|
__spi_write_reg(0x05, 0x4003); \
|
|
__spi_write_reg(0x06, 0x000a); \
|
|
__spi_write_reg(0x07, 0x0021); \
|
|
__spi_write_reg(0x08, 0x0c00); \
|
|
__spi_write_reg(0x10, 0x0103); \
|
|
__spi_write_reg(0x11, 0x0301); \
|
|
__spi_write_reg(0x12, 0x1f0f); \
|
|
__spi_write_reg(0x13, 0x1f0f); \
|
|
__spi_write_reg(0x14, 0x0707); \
|
|
__spi_write_reg(0x15, 0x0307); \
|
|
__spi_write_reg(0x16, 0x0707); \
|
|
__spi_write_reg(0x17, 0x0000); \
|
|
__spi_write_reg(0x18, 0x0004); \
|
|
__spi_write_reg(0x19, 0x0000); \
|
|
mdelay(60); \
|
|
__spi_write_reg(0x09, 0x4a55); \
|
|
__spi_write_reg(0x05, 0x5003); \
|
|
} while (0)
|
|
|
|
#define __lcd_special_off() \
|
|
do { \
|
|
__spi_write_reg(0x09, 0x4055); \
|
|
__spi_write_reg(0x05, 0x4003); \
|
|
__spi_write_reg(0x0a, 0x0000); \
|
|
mdelay(10); \
|
|
__spi_write_reg(0x09, 0x4000); \
|
|
__gpio_clear_pin(PortSht); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZLCD_SAMSUNG_LTV350QVF04 */
|
|
|
|
#if defined(CONFIG_JZLCD_AUO_A030FL01_V1)
|
|
#if defined(CONFIG_JZ4740_PAVO) /* board pavo */
|
|
#define SPEN (32*1+18) /*LCD_CS*/
|
|
#define SPCK (32*1+17) /*LCD_SCL*/
|
|
#define SPDA (32*2+12) /*LCD_SDA*/
|
|
#define LCD_RET (32*2+23) /*use for lcd reset*/
|
|
#elif defined(CONFIG_JZ4740_LYRA) /* board lyra */
|
|
#define SPEN (32*3+19) //LCD_CS
|
|
#define SPCK (32*3+18) //LCD_SCL
|
|
#define SPDA (32*3+20) //LCD_SDA
|
|
#define LCD_RET (32*3+31) //use for lcd reset
|
|
#else
|
|
#error "driver/video/Jzlcd.h, please define SPI pins on your board."
|
|
#endif
|
|
|
|
#define __spi_write_reg(reg, val) \
|
|
do { \
|
|
unsigned char no; \
|
|
unsigned short value; \
|
|
unsigned char a=0; \
|
|
unsigned char b=0; \
|
|
__gpio_as_output(SPEN); /* use SPDA */ \
|
|
__gpio_as_output(SPCK); /* use SPCK */ \
|
|
__gpio_as_output(SPDA); /* use SPDA */ \
|
|
a=reg; \
|
|
b=val; \
|
|
__gpio_set_pin(SPEN); \
|
|
__gpio_clear_pin(SPCK); \
|
|
udelay(50); \
|
|
__gpio_clear_pin(SPDA); \
|
|
__gpio_clear_pin(SPEN); \
|
|
udelay(50); \
|
|
value=((a<<8)|(b&0xFF)); \
|
|
for(no=0;no<16;no++) \
|
|
{ \
|
|
if((value&0x8000)==0x8000){ \
|
|
__gpio_set_pin(SPDA);} \
|
|
else{ \
|
|
__gpio_clear_pin(SPDA); } \
|
|
udelay(400); \
|
|
__gpio_set_pin(SPCK); \
|
|
value=(value<<1); \
|
|
udelay(50); \
|
|
__gpio_clear_pin(SPCK); \
|
|
} \
|
|
__gpio_set_pin(SPEN); \
|
|
udelay(400); \
|
|
} while (0)
|
|
#define __spi_read_reg(reg,val) \
|
|
do{ \
|
|
unsigned char no; \
|
|
unsigned short value; \
|
|
__gpio_as_output(SPEN); /* use SPDA */ \
|
|
__gpio_as_output(SPCK); /* use SPCK */ \
|
|
__gpio_as_output(SPDA); /* use SPDA */ \
|
|
value = ((reg << 0) | (1 << 7)); \
|
|
val = 0; \
|
|
__gpio_as_output(SPDA); \
|
|
__gpio_set_pin(SPEN); \
|
|
__gpio_set_pin(SPCK); \
|
|
udelay(1); \
|
|
__gpio_clear_pin(SPDA); \
|
|
__gpio_clear_pin(SPEN); \
|
|
udelay(1); \
|
|
for (no = 0; no < 16; no++ ) { \
|
|
__gpio_clear_pin(SPCK); \
|
|
udelay(1); \
|
|
if(no < 8) \
|
|
{ \
|
|
if (value & 0x80) /* send data */ \
|
|
__gpio_set_pin(SPDA); \
|
|
else \
|
|
__gpio_clear_pin(SPDA); \
|
|
value = (value << 1); \
|
|
udelay(1); \
|
|
__gpio_set_pin(SPCK); \
|
|
udelay(1); \
|
|
} \
|
|
else \
|
|
{ \
|
|
__gpio_as_input(SPDA); \
|
|
udelay(1); \
|
|
__gpio_set_pin(SPCK); \
|
|
udelay(1); \
|
|
val = (val << 1); \
|
|
val |= __gpio_get_pin(SPDA); \
|
|
udelay(1); \
|
|
} \
|
|
udelay(400); \
|
|
} \
|
|
__gpio_as_output(SPDA); \
|
|
__gpio_set_pin(SPEN); \
|
|
udelay(400); \
|
|
} while(0)
|
|
|
|
#define __lcd_special_pin_init() \
|
|
do { \
|
|
__gpio_as_output(SPEN); /* use SPDA */ \
|
|
__gpio_as_output(SPCK); /* use SPCK */ \
|
|
__gpio_as_output(SPDA); /* use SPDA */ \
|
|
__gpio_as_output(LCD_RET); \
|
|
udelay(50); \
|
|
__gpio_clear_pin(LCD_RET); \
|
|
udelay(100); \
|
|
__gpio_set_pin(LCD_RET); \
|
|
} while (0)
|
|
#define __lcd_special_on() \
|
|
do { \
|
|
udelay(50); \
|
|
__gpio_clear_pin(LCD_RET); \
|
|
udelay(100); \
|
|
__gpio_set_pin(LCD_RET); \
|
|
__spi_write_reg(0x0D, 0x44); \
|
|
__spi_write_reg(0x0D, 0x4D); \
|
|
__spi_write_reg(0x0B, 0x06); \
|
|
__spi_write_reg(0x40, 0xC0); \
|
|
__spi_write_reg(0x42, 0x43); \
|
|
__spi_write_reg(0x44, 0x28); \
|
|
__spi_write_reg(0x0D, 0x4F); \
|
|
} while (0)
|
|
|
|
#define __lcd_special_off() \
|
|
do { \
|
|
__spi_write_reg(0x04, 0x4C); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZLCD_AUO_A030FL01_V1 */
|
|
|
|
//#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01)
|
|
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
|
|
|
|
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */
|
|
#define MODE 0xcd /* 24bit parellel RGB */
|
|
#endif
|
|
#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
|
|
#define MODE 0xc9 /* 8bit serial RGB */
|
|
#endif
|
|
|
|
#if defined(CONFIG_JZ4730_PMP)
|
|
#define SPEN 60 //LCD_SPL
|
|
#define SPCK 61 //LCD_CLS
|
|
#define SPDA 62 //LCD_PS
|
|
#define LCD_RET 63 //LCD_REV //use for lcd reset
|
|
#elif defined(CONFIG_JZ4740_LEO) /* board leo */
|
|
#define SPEN (32*1+18) //LCD_SPL
|
|
#define SPCK (32*1+17) //LCD_CLS
|
|
#define SPDA (32*2+22) //LCD_PS
|
|
#define LCD_RET (32*2+23) //LCD_REV //use for lcd reset
|
|
#elif defined(CONFIG_JZ4740_PAVO) /* board pavo */
|
|
#define SPEN (32*1+18) //LCD_SPL
|
|
#define SPCK (32*1+17) //LCD_CLS
|
|
#define SPDA (32*2+12) //LCD_D12
|
|
#define LCD_RET (32*2+23) //LCD_REV, GPC23
|
|
#if 0 /*old driver*/
|
|
#define SPEN (32*1+18) //LCD_SPL
|
|
#define SPCK (32*1+17) //LCD_CLS
|
|
#define SPDA (32*2+12) //LCD_D12
|
|
#define LCD_RET (32*3+27) //PWM4 //use for lcd reset
|
|
#endif
|
|
#else
|
|
#error "driver/video/Jzlcd.h, please define SPI pins on your board."
|
|
#endif
|
|
|
|
#define __spi_write_reg1(reg, val) \
|
|
do { \
|
|
unsigned char no;\
|
|
unsigned short value;\
|
|
unsigned char a=0;\
|
|
unsigned char b=0;\
|
|
a=reg;\
|
|
b=val;\
|
|
__gpio_set_pin(SPEN);\
|
|
__gpio_set_pin(SPCK);\
|
|
__gpio_clear_pin(SPDA);\
|
|
__gpio_clear_pin(SPEN);\
|
|
udelay(25);\
|
|
value=((a<<8)|(b&0xFF));\
|
|
for(no=0;no<16;no++)\
|
|
{\
|
|
__gpio_clear_pin(SPCK);\
|
|
if((value&0x8000)==0x8000)\
|
|
__gpio_set_pin(SPDA);\
|
|
else\
|
|
__gpio_clear_pin(SPDA);\
|
|
udelay(25);\
|
|
__gpio_set_pin(SPCK);\
|
|
value=(value<<1); \
|
|
udelay(25);\
|
|
}\
|
|
__gpio_set_pin(SPEN);\
|
|
udelay(100);\
|
|
} while (0)
|
|
|
|
#define __spi_write_reg(reg, val) \
|
|
do {\
|
|
__spi_write_reg1((reg<<2|2), val); \
|
|
udelay(100); \
|
|
}while(0)
|
|
|
|
#define __lcd_special_pin_init() \
|
|
do { \
|
|
__gpio_as_output(SPEN); /* use SPDA */\
|
|
__gpio_as_output(SPCK); /* use SPCK */\
|
|
__gpio_as_output(SPDA); /* use SPDA */\
|
|
__gpio_as_output(LCD_RET);\
|
|
udelay(50);\
|
|
__gpio_clear_pin(LCD_RET);\
|
|
mdelay(150);\
|
|
__gpio_set_pin(LCD_RET);\
|
|
} while (0)
|
|
|
|
#define __lcd_special_on() \
|
|
do { \
|
|
udelay(50);\
|
|
__gpio_clear_pin(LCD_RET);\
|
|
mdelay(150);\
|
|
__gpio_set_pin(LCD_RET);\
|
|
mdelay(10);\
|
|
__spi_write_reg(0x00, 0x03); \
|
|
__spi_write_reg(0x01, 0x40); \
|
|
__spi_write_reg(0x02, 0x11); \
|
|
__spi_write_reg(0x03, MODE); /* mode */ \
|
|
__spi_write_reg(0x04, 0x32); \
|
|
__spi_write_reg(0x05, 0x0e); \
|
|
__spi_write_reg(0x07, 0x03); \
|
|
__spi_write_reg(0x08, 0x08); \
|
|
__spi_write_reg(0x09, 0x32); \
|
|
__spi_write_reg(0x0A, 0x88); \
|
|
__spi_write_reg(0x0B, 0xc6); \
|
|
__spi_write_reg(0x0C, 0x20); \
|
|
__spi_write_reg(0x0D, 0x20); \
|
|
} while (0) //reg 0x0a is control the display direction:DB0->horizontal level DB1->vertical level
|
|
|
|
/* __spi_write_reg(0x02, 0x03); \
|
|
__spi_write_reg(0x06, 0x40); \
|
|
__spi_write_reg(0x0a, 0x11); \
|
|
__spi_write_reg(0x0e, 0xcd); \
|
|
__spi_write_reg(0x12, 0x32); \
|
|
__spi_write_reg(0x16, 0x0e); \
|
|
__spi_write_reg(0x1e, 0x03); \
|
|
__spi_write_reg(0x22, 0x08); \
|
|
__spi_write_reg(0x26, 0x40); \
|
|
__spi_write_reg(0x2a, 0x88); \
|
|
__spi_write_reg(0x2e, 0x88); \
|
|
__spi_write_reg(0x32, 0x20); \
|
|
__spi_write_reg(0x36, 0x20); \
|
|
*/
|
|
// } while (0) //reg 0x0a is control the display direction:DB0->horizontal level DB1->vertical level
|
|
|
|
#define __lcd_special_off() \
|
|
do { \
|
|
__spi_write_reg(0x00, 0x03); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 or CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL */
|
|
|
|
|
|
#ifndef __lcd_special_pin_init
|
|
#define __lcd_special_pin_init()
|
|
#endif
|
|
#ifndef __lcd_special_on
|
|
#define __lcd_special_on()
|
|
#endif
|
|
#ifndef __lcd_special_off
|
|
#define __lcd_special_off()
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Platform specific definition
|
|
*/
|
|
|
|
#if defined(CONFIG_JZ4730_GPS)
|
|
|
|
#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
; \
|
|
} while (0)
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__lcd_special_pin_init(); \
|
|
__gpio_as_output(94); /* PWM0 pin */ \
|
|
__gpio_as_output(95); /* PWM1 pin */ \
|
|
} while (0)
|
|
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_special_on(); \
|
|
__gpio_set_pin(94); /* PWM0 pin */ \
|
|
__gpio_set_pin(95); /* PWM1 pin */ \
|
|
__lcd_set_backlight_level(8); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZ4730_GPS */
|
|
|
|
#if defined(CONFIG_JZ4730_FPRINT)
|
|
|
|
#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
REG_PWM_DUT(0) = n; \
|
|
REG_PWM_PER(0) = 7; \
|
|
REG_PWM_CTR(0) = 0x81; \
|
|
} while (0)
|
|
|
|
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01)
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__lcd_special_pin_init();\
|
|
__gpio_as_pwm();\
|
|
__lcd_set_backlight_level(8);\
|
|
} while (0)
|
|
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_set_backlight_level(8); \
|
|
__lcd_special_on();\
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_set_backlight_level(0); \
|
|
__lcd_special_off();\
|
|
} while (0)
|
|
|
|
#else
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__gpio_as_output(GPIO_DISP_OFF_N); \
|
|
__gpio_as_pwm(); \
|
|
__lcd_set_backlight_level(8); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_set_backlight_level(8); \
|
|
__gpio_set_pin(GPIO_DISP_OFF_N); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_set_backlight_level(0); \
|
|
__gpio_clear_pin(GPIO_DISP_OFF_N); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#endif /* CONFIG_JZ4730_FPRINT */
|
|
|
|
#if defined(CONFIG_JZ4730_LIBRA)
|
|
|
|
#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
} while (0)
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__lcd_special_pin_init(); \
|
|
__gpio_clear_pin(100); \
|
|
__gpio_as_output(100); \
|
|
__gpio_as_output(94); \
|
|
__gpio_as_output(95); \
|
|
__lcd_set_backlight_level(8); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_special_on(); \
|
|
__gpio_set_pin(100); \
|
|
__gpio_set_pin(94); \
|
|
__gpio_set_pin(95); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
__gpio_clear_pin(100); \
|
|
__gpio_clear_pin(94); \
|
|
__gpio_clear_pin(95); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZ4730_LIBRA */
|
|
|
|
#if defined(CONFIG_JZ4730_PMP)
|
|
|
|
#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
REG_PWM_DUT(0) = n; \
|
|
REG_PWM_PER(0) = 7; \
|
|
REG_PWM_CTR(0) = 0x81; \
|
|
} while (0)
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__gpio_as_output(GPIO_DISP_OFF_N); \
|
|
__gpio_as_pwm(); \
|
|
__lcd_set_backlight_level(10); \
|
|
__lcd_special_pin_init(); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_special_on(); \
|
|
__lcd_set_backlight_level(8); \
|
|
__gpio_set_pin(GPIO_DISP_OFF_N); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
__lcd_set_backlight_level(0); \
|
|
__gpio_clear_pin(GPIO_DISP_OFF_N); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_JZ4730_PMP */
|
|
|
|
/*#if defined(CONFIG_JZ4740_LEO) || defined(CONFIG_JZ4740_PAVO)*/
|
|
#if defined(CONFIG_SOC_JZ4740)
|
|
#if defined(CONFIG_JZ4740_PAVO) || defined(CONFIG_JZ4740_LYRA)
|
|
#define PWM_CHN 4 /* pwm channel */
|
|
#define PWM_FULL 101
|
|
/* 100 level: 0,1,...,100 */
|
|
#define __lcd_set_backlight_level(n)\
|
|
do { \
|
|
__gpio_as_output(GPIO_PWM); \
|
|
__gpio_set_pin(GPIO_PWM); \
|
|
} while (0)
|
|
|
|
#define __lcd_close_backlight() \
|
|
do { \
|
|
__gpio_as_output(GPIO_PWM); \
|
|
__gpio_clear_pin(GPIO_PWM); \
|
|
} while (0)
|
|
|
|
#elif defined(CONFIG_JZ4720_VIRGO)
|
|
#define GPIO_PWM 119 /* GP_D23 */
|
|
#define PWM_CHN 0 /* pwm channel */
|
|
#define PWM_FULL 101
|
|
/* 100 level: 0,1,...,100 */
|
|
/*#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
__gpio_as_pwm(0); \
|
|
__tcu_disable_pwm_output(PWM_CHN); \
|
|
__tcu_stop_counter(PWM_CHN); \
|
|
__tcu_init_pwm_output_high(PWM_CHN); \
|
|
__tcu_set_pwm_output_shutdown_abrupt(PWM_CHN); \
|
|
__tcu_select_clk_div1(PWM_CHN); \
|
|
__tcu_mask_full_match_irq(PWM_CHN); \
|
|
__tcu_mask_half_match_irq(PWM_CHN); \
|
|
__tcu_set_count(PWM_CHN,0); \
|
|
__tcu_set_full_data(PWM_CHN,__cpm_get_extalclk()/1000); \
|
|
__tcu_set_half_data(PWM_CHN,__cpm_get_extalclk()/1000*n/100); \
|
|
__tcu_enable_pwm_output(PWM_CHN); \
|
|
__tcu_select_extalclk(PWM_CHN); \
|
|
__tcu_start_counter(PWM_CHN); \
|
|
} while (0)
|
|
*/
|
|
|
|
#define __lcd_set_backlight_level(n) \
|
|
do { \
|
|
__gpio_as_output(GPIO_PWM); \
|
|
__gpio_set_pin(GPIO_PWM); \
|
|
} while (0)
|
|
|
|
#define __lcd_close_backlight() \
|
|
do { \
|
|
__gpio_as_output(GPIO_PWM); \
|
|
__gpio_clear_pin(GPIO_PWM); \
|
|
} while (0)
|
|
|
|
#else
|
|
#define __lcd_set_backlight_level(n)
|
|
#define __lcd_close_backlight()
|
|
|
|
#endif /* #if defined(CONFIG_MIPS_JZ4740_PAVO) */
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__gpio_as_output(GPIO_DISP_OFF_N); \
|
|
__cpm_start_tcu(); \
|
|
__lcd_special_pin_init(); \
|
|
} while (0)
|
|
/* __lcd_set_backlight_level(100); \*/
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__gpio_set_pin(GPIO_DISP_OFF_N); \
|
|
__lcd_special_on(); \
|
|
__lcd_set_backlight_level(80); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
__lcd_close_backlight(); \
|
|
__gpio_clear_pin(GPIO_DISP_OFF_N); \
|
|
} while (0)
|
|
|
|
#endif /* CONFIG_MIPS_JZ4740_LEO */
|
|
|
|
#if defined(CONFIG_JZLCD_MSTN_240x128)
|
|
|
|
#if 0 /* The final version does not use software emulation of VCOM. */
|
|
|
|
#define GPIO_VSYNC 59
|
|
#define GPIO_VCOM 90
|
|
|
|
#define REG_VCOM REG_GPIO_GPDR((GPIO_VCOM>>5))
|
|
#define VCOM_BIT (1 << (GPIO_VCOM & 0x1f))
|
|
static unsigned int vcom_static;
|
|
static void vsync_irq(int irq, void *dev_id, struct pt_regs *reg)
|
|
{
|
|
vcom_static = REG_VCOM;
|
|
vcom_static ^= VCOM_BIT;
|
|
REG_VCOM = vcom_static;
|
|
}
|
|
|
|
#define __lcd_display_pin_init() \
|
|
__gpio_as_irq_rise_edge(GPIO_VSYNC); \
|
|
__gpio_as_output(GPIO_VCOM); \
|
|
{ \
|
|
static int inited = 0; \
|
|
if (!inited) { \
|
|
inited = 1; \
|
|
if (request_irq(IRQ_GPIO_0 + GPIO_VSYNC, vsync_irq, SA_INTERRUPT, \
|
|
"vsync", 0)) { \
|
|
err = -EBUSY; \
|
|
goto failed; \
|
|
}}}
|
|
|
|
#endif
|
|
|
|
/* We uses AC BIAs pin to generate VCOM signal, so above code should be removed.
|
|
*/
|
|
#endif
|
|
/*****************************************************************************
|
|
* LCD display pin dummy macros
|
|
*****************************************************************************/
|
|
#ifndef __lcd_display_pin_init
|
|
#define __lcd_display_pin_init()
|
|
#endif
|
|
#ifndef __lcd_display_on
|
|
#define __lcd_display_on()
|
|
#endif
|
|
#ifndef __lcd_display_off
|
|
#define __lcd_display_off()
|
|
#endif
|
|
#ifndef __lcd_set_backlight_level
|
|
#define __lcd_set_backlight_level(n)
|
|
#endif
|
|
|
|
#endif /* __JZLCD_H__ */
|