1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 23:04:06 +02:00
openwrt-xburst/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
juhosg 0464c077a4 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:43 +00:00

112 lines
1.7 KiB
Bash

#!/bin/sh
rt2x00_eeprom_die() {
echo "rt2x00 eeprom: " "$*"
exit 1
}
rt2x00_eeprom_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
. /etc/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
rt2x00_eeprom_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
rt2x00_eeprom_die "failed to extract from $mtd"
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/ramips.sh
board=$(ramips_board_name)
case "$FIRMWARE" in
"RT288X.eeprom" | \
"RT305X.eeprom" | \
"RT3883.eeprom")
case $board in
dir-300-b1 | \
dir-600-b1 | \
dir-600-b2)
rt2x00_eeprom_extract "devdata" 16384 272
;;
dap-1350)
rt2x00_eeprom_extract "devdata" 0 272
;;
rt-n10-plus | \
rt-g32-b1)
rt2x00_eeprom_extract "devconf" 0 272
;;
f5d8235-v1 | \
f5d8235-v2)
rt2x00_eeprom_extract "u-boot" 262144 272
;;
3g-6200n | \
all0239-3g | \
all0256n | \
all5002 | \
argus-atp52b | \
bc2 | \
carambola | \
dir-615-h1 | \
dir-620-a1 | \
esr-9753 | \
fonera20n | \
freestation5 | \
hw550-3g | \
mofi3500-3gn | \
pwh2004 | \
nbg-419n | \
nw718 | \
omni-emb | \
psr-680w | \
rt-n15 | \
rt-n56u | \
sl-r7205 | \
v11st-fe | \
v22rw-2x2 | \
w306r-v20 | \
w502u | \
wcr-150gn | \
whr-g300n | \
wl-330n | \
wl-330n3g | \
wl-351 | \
wli-tx4-ag300n | \
wr512-3gn | \
wr6202 | \
ur-336un | \
xdxrn502j)
rt2x00_eeprom_extract "factory" 0 272
;;
wl341v3)
rt2x00_eeprom_extract "board-nvram" 64880 272
;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
esac
;;
"rt2x00pci_1_0.eeprom")
case $board in
rt-n56u)
rt2x00_eeprom_extract "factory" 32768 272
;;
esac
;;
esac