| .. |
|
ar71xx.c
|
ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
|
2011-05-31 22:53:35 +00:00 |
|
dev-ap91-pci.c
|
ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
|
2010-12-14 18:01:00 +00:00 |
|
dev-ap91-pci.h
|
ar71xx: fix build error w/o CONFIG_PCI
|
2011-04-12 13:14:56 +00:00 |
|
dev-ap94-pci.c
|
ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
|
2010-12-17 17:10:19 +00:00 |
|
dev-ap94-pci.h
|
ar71xx: remove stray semicolons
|
2010-12-17 17:57:20 +00:00 |
|
dev-ar9xxx-wmac.c
|
ar71xx: init external_reset for AR933X
|
2011-06-01 13:12:30 +00:00 |
|
dev-ar9xxx-wmac.h
|
ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
|
2011-04-11 17:37:08 +00:00 |
|
dev-db120-pci.c
|
ar71xx: add DB120 board specific PCI initialization
|
2011-04-07 20:53:41 +00:00 |
|
dev-db120-pci.h
|
ar71xx: add DB120 board specific PCI initialization
|
2011-04-07 20:53:41 +00:00 |
|
dev-dsa.c
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-dsa.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-gpio-buttons.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
dev-gpio-buttons.h
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
dev-leds-gpio.c
|
ar71xx: fix 2.6.34 build errors
|
2010-06-07 09:18:13 +00:00 |
|
dev-leds-gpio.h
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
|
dev-m25p80.c
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-m25p80.h
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-pb9x-pci.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb9x-pci.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb42-pci.c
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-pb42-pci.h
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-usb.c
|
ar71xx: enable USB support for the AR933x SoCs
|
2011-05-31 22:53:36 +00:00 |
|
dev-usb.h
|
ar71xx: move USB host device support into a separate file
|
2009-12-26 14:19:13 +00:00 |
|
devices.c
|
ar71xx: fix uart clock frequency for AR933X
|
2011-06-19 13:17:50 +00:00 |
|
devices.h
|
ar71xx: change mac address initialization
|
2010-08-18 16:00:28 +00:00 |
|
early_printk.c
|
ar71xx: update early_printk code
|
2011-06-13 08:12:38 +00:00 |
|
gpio.c
|
ar71xx: enable GPIO support for the AR933x SoCs
|
2011-05-31 22:53:30 +00:00 |
|
irq.c
|
ar71xx: use separate handlers for IP2 interrupts
|
2011-06-29 08:57:28 +00:00 |
|
Kconfig
|
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
|
2011-06-01 02:23:26 +00:00 |
|
mach-ap81.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-ap83.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-ap96.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-ap121.c
|
ar71xx: add support for the AP121/AP121-MINI reference boards
|
2011-05-31 22:53:43 +00:00 |
|
mach-aw-nr580.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-db120.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-dir-600-a1.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-dir-615-c1.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-dir-825-b1.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-eap7660d.c
|
ar71xx: fix build error w/o CONFIG_PCI
|
2011-04-12 13:14:56 +00:00 |
|
mach-ja76pf.c
|
ar71xx: populate LED3 on the JA76PF board
|
2011-05-08 21:38:51 +00:00 |
|
mach-jwap003.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-mzk-w04nu.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-mzk-w300nh.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-nbg460n.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-pb42.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-pb44.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-pb92.c
|
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
|
2011-04-28 21:27:42 +00:00 |
|
mach-rb4xx.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-rb750.c
|
ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection
|
2011-04-02 00:47:33 +00:00 |
|
mach-tew-632brp.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-mr3x20.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wa901nd-v2.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wa901nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wr741nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wr841n.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wr941nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-tl-wr1043nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-ubnt.c
|
ar71xx: don't probe the LAN PHY
|
2011-05-17 11:15:24 +00:00 |
|
mach-wndr3700.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-wnr2000.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-wp543.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-wrt160nl.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-wrt400n.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-wzr-hp-ag300h.c
|
ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
|
2011-06-25 13:48:47 +00:00 |
|
mach-wzr-hp-g300nh.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
|
mach-zcn-1523h.c
|
ar71xx: select the internal antenna by default on the ZCN-1523H boards
|
2011-06-04 12:30:09 +00:00 |
|
machtype.h
|
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
|
2011-06-01 02:23:26 +00:00 |
|
Makefile
|
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
|
2011-06-01 02:23:26 +00:00 |
|
nvram.c
|
ar71xx: fix whitespaces nits
|
2010-11-12 18:50:29 +00:00 |
|
nvram.h
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
|
pci-ath9k-fixup.c
|
ar71xx: move ath9k specific PCI fixup into a separate file
|
2010-09-27 14:53:46 +00:00 |
|
pci-ath9k-fixup.h
|
ar71xx: move ath9k specific PCI fixup into a separate file
|
2010-09-27 14:53:46 +00:00 |
|
pci.c
|
ar71xx: enable PCI for the AR934[24] SoCs
|
2011-04-07 20:53:05 +00:00 |
|
prom.c
|
ar71xx: fix inline attribute location
|
2010-11-12 18:51:21 +00:00 |
|
setup.c
|
ar71xx: export SoC revision
|
2011-06-01 13:12:24 +00:00 |
32852643ef