1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 11:46:28 +02:00
openwrt-xburst/package/hostapd/patches/100-pending_work.patch
nbd e827a711a3 hostapd: update to 20120326
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 10:42:47 +00:00

124 lines
3.5 KiB
Diff

--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -1488,13 +1488,6 @@ static void handle_assoc_cb(struct hosta
int new_assoc = 1;
struct ieee80211_ht_capabilities ht_cap;
- if (!ok) {
- hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
- HOSTAPD_LEVEL_DEBUG,
- "did not acknowledge association response");
- return;
- }
-
if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) :
sizeof(mgmt->u.assoc_resp))) {
printf("handle_assoc_cb(reassoc=%d) - too short payload "
@@ -1502,11 +1495,6 @@ static void handle_assoc_cb(struct hosta
return;
}
- if (reassoc)
- status = le_to_host16(mgmt->u.reassoc_resp.status_code);
- else
- status = le_to_host16(mgmt->u.assoc_resp.status_code);
-
sta = ap_get_sta(hapd, mgmt->da);
if (!sta) {
printf("handle_assoc_cb: STA " MACSTR " not found\n",
@@ -1514,6 +1502,19 @@ static void handle_assoc_cb(struct hosta
return;
}
+ if (!ok) {
+ hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
+ HOSTAPD_LEVEL_DEBUG,
+ "did not acknowledge association response");
+ sta->flags &= ~WLAN_STA_ASSOC_REQ_OK;
+ return;
+ }
+
+ if (reassoc)
+ status = le_to_host16(mgmt->u.reassoc_resp.status_code);
+ else
+ status = le_to_host16(mgmt->u.assoc_resp.status_code);
+
if (status != WLAN_STATUS_SUCCESS)
goto fail;
@@ -1812,6 +1813,9 @@ void ieee802_11_rx_from_unknown(struct h
sta = ap_get_sta(hapd, src);
if (sta && (sta->flags & WLAN_STA_ASSOC)) {
+ if (!hapd->conf->wds_sta)
+ return;
+
if (wds && !(sta->flags & WLAN_STA_WDS)) {
wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for "
"STA " MACSTR " (aid %u)",
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -2588,10 +2588,10 @@ static int wpa_driver_nl80211_capa(struc
drv->data_tx_status = info.data_tx_status;
/*
- * If poll command is supported mac80211 is new enough to
- * have everything we need to not need monitor interfaces.
+ * If poll command and tx status are supported, mac80211 is new enough
+ * to have everything we need to not need monitor interfaces.
*/
- drv->use_monitor = !info.poll_command_supported;
+ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status;
if (drv->device_ap_sme && drv->use_monitor) {
/*
@@ -6267,8 +6267,8 @@ static int wpa_driver_nl80211_hapd_send_
pos = (u8 *) (hdr + 1);
if (qos) {
- /* add an empty QoS header if needed */
- pos[0] = 0;
+ /* Set highest priority in QoS header */
+ pos[0] = 7;
pos[1] = 0;
pos += 2;
}
@@ -7533,6 +7533,10 @@ static int i802_set_wds_sta(void *priv,
linux_set_iface_flags(drv->global->ioctl_sock, name, 1);
return i802_set_sta_vlan(priv, addr, name, 0);
} else {
+ if (bridge_ifname)
+ linux_br_del_if(drv->global->ioctl_sock, bridge_ifname,
+ name);
+
i802_set_sta_vlan(priv, addr, bss->ifname, 0);
return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN,
name);
@@ -7900,7 +7904,12 @@ static int wpa_driver_nl80211_if_remove(
if (ifindex <= 0)
return -1;
+ nl80211_remove_iface(drv, ifindex);
+
#ifdef HOSTAPD
+ if (type != WPA_IF_AP_BSS)
+ return 0;
+
if (bss->added_if_into_bridge) {
if (linux_br_del_if(drv->global->ioctl_sock, bss->brname,
bss->ifname) < 0)
@@ -7914,13 +7923,6 @@ static int wpa_driver_nl80211_if_remove(
"bridge %s: %s",
bss->brname, strerror(errno));
}
-#endif /* HOSTAPD */
-
- nl80211_remove_iface(drv, ifindex);
-
-#ifdef HOSTAPD
- if (type != WPA_IF_AP_BSS)
- return 0;
if (bss != &drv->first_bss) {
struct i802_bss *tbss;