mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-18 17:54:04 +02:00
a3a71d430b
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33781 3c298f89-4303-0410-b956-a3cf2f4a3e73
881 lines
21 KiB
ArmAsm
881 lines
21 KiB
ArmAsm
/*
|
|
* for jz4740 usb boot
|
|
*
|
|
* Copyright (c) 2009 Xiangfu Liu <xiangfu.z@gmail.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
.set noreorder
|
|
.globl usb_boot
|
|
.text
|
|
|
|
//----------------------------------------------------------------------
|
|
// Both NAND and USB boot load data to D-Cache first, then transfer
|
|
// data from D-Cache to I-Cache, and jump to execute the code in I-Cache.
|
|
// So init caches first and then dispatch to a proper boot routine.
|
|
//----------------------------------------------------------------------
|
|
|
|
.macro load_addr reg addr
|
|
li \reg, 0x80000000
|
|
addiu \reg, \reg, \addr
|
|
la $2, usbboot_begin
|
|
subu \reg, \reg, $2
|
|
.endm
|
|
|
|
usb_boot:
|
|
//--------------------------------------------------------------
|
|
// Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz.
|
|
//--------------------------------------------------------------
|
|
la $9, 0xB0000000 // CPCCR: Clock Control Register
|
|
la $8, 0x42041110 // I:S:M:P=1:2:2:2
|
|
sw $8, 0($9)
|
|
|
|
la $9, 0xB0000010 // CPPCR: PLL Control Register
|
|
la $8, 0x06000120 // M=12 N=0 D=0 CLK=12*(M+2)/(N+2)
|
|
sw $8, 0($9)
|
|
|
|
mtc0 $0, $26 // CP0_ERRCTL, restore WST reset state
|
|
nop
|
|
|
|
mtc0 $0, $16 // CP0_CONFIG
|
|
nop
|
|
|
|
// Relocate code to beginning of the ram
|
|
|
|
la $2, usbboot_begin
|
|
la $3, usbboot_end
|
|
li $4, 0x80000000
|
|
|
|
1:
|
|
lw $5, 0($2)
|
|
sw $5, 0($4)
|
|
addiu $2, $2, 4
|
|
bne $2, $3, 1b
|
|
addiu $4, $4, 4
|
|
|
|
li $2, 0x80000000
|
|
ori $3, $2, 0
|
|
addiu $3, $3, usbboot_end
|
|
la $4, usbboot_begin
|
|
subu $3, $3, $4
|
|
|
|
|
|
2:
|
|
cache 0x0, 0($2) // Index_Invalidate_I
|
|
cache 0x1, 0($2) // Index_Writeback_Inv_D
|
|
addiu $2, $2, 32
|
|
subu $4, $3, $2
|
|
bgtz $4, 2b
|
|
nop
|
|
|
|
load_addr $3, usb_boot_return
|
|
|
|
jr $3
|
|
|
|
usbboot_begin:
|
|
|
|
init_caches:
|
|
li $2, 3 // cacheable for kseg0 access
|
|
mtc0 $2, $16 // CP0_CONFIG
|
|
nop
|
|
|
|
li $2, 0x20000000 // enable idx-store-data cache insn
|
|
mtc0 $2, $26 // CP0_ERRCTL
|
|
|
|
ori $2, $28, 0 // start address
|
|
ori $3, $2, 0x3fe0 // end address, total 16KB
|
|
mtc0 $0, $28, 0 // CP0_TAGLO
|
|
mtc0 $0, $28, 1 // CP0_DATALO
|
|
cache_clear_a_line:
|
|
cache 0x8, 0($2) // Index_Store_Tag_I
|
|
cache 0x9, 0($2) // Index_Store_Tag_D
|
|
bne $2, $3, cache_clear_a_line
|
|
addiu $2, $2, 32 // increment CACHE_LINE_SIZE
|
|
|
|
ori $2, $28, 0 // start address
|
|
ori $3, $2, 0x3fe0 // end address, total 16KB
|
|
la $4, 0x1ffff000 // physical address and 4KB page mask
|
|
cache_alloc_a_line:
|
|
and $5, $2, $4
|
|
ori $5, $5, 1 // V bit of the physical tag
|
|
mtc0 $5, $28, 0 // CP0_TAGLO
|
|
cache 0x8, 0($2) // Index_Store_Tag_I
|
|
cache 0x9, 0($2) // Index_Store_Tag_D
|
|
bne $2, $3, cache_alloc_a_line
|
|
addiu $2, $2, 32 // increment CACHE_LINE_SIZE
|
|
|
|
nop
|
|
nop
|
|
nop
|
|
//--------------------------------------------------------------
|
|
// Transfer data from dcache to icache, then jump to icache.
|
|
//
|
|
// Input parameters:
|
|
//
|
|
// $19: data length in bytes
|
|
// $20: jump target address
|
|
//--------------------------------------------------------------
|
|
xfer_d2i:
|
|
|
|
ori $8, $20, 0
|
|
addu $9, $8, $19 // total 16KB
|
|
|
|
1:
|
|
cache 0x0, 0($8) // Index_Invalidate_I
|
|
cache 0x1, 0($8) // Index_Writeback_Inv_D
|
|
bne $8, $9, 1b
|
|
addiu $8, $8, 32
|
|
|
|
// flush write-buffer
|
|
sync
|
|
|
|
// Invalidate BTB
|
|
mfc0 $8, $16, 7 // CP0_CONFIG
|
|
nop
|
|
ori $8, 2
|
|
mtc0 $8, $16, 7
|
|
nop
|
|
|
|
// Overwrite config to disable ram initalisation
|
|
li $2, 0xff
|
|
sb $2, 20($20)
|
|
|
|
jalr $20
|
|
nop
|
|
|
|
icache_return:
|
|
//--------------------------------------------------------------
|
|
// User code can return to here after executing itself in
|
|
// icache, by jumping to $31.
|
|
//--------------------------------------------------------------
|
|
b usb_boot_return
|
|
nop
|
|
|
|
|
|
usb_boot_return:
|
|
//--------------------------------------------------------------
|
|
// Enable the USB PHY
|
|
//--------------------------------------------------------------
|
|
la $9, 0xB0000024 // CPM_SCR
|
|
lw $8, 0($9)
|
|
ori $8, 0x40 // USBPHY_ENABLE
|
|
sw $8, 0($9)
|
|
|
|
//--------------------------------------------------------------
|
|
// Initialize USB registers
|
|
//--------------------------------------------------------------
|
|
la $27, 0xb3040000 // USB registers base address
|
|
|
|
sb $0, 0x0b($27) // INTRUSBE: disable common USB interrupts
|
|
sh $0, 0x06($27) // INTRINE: disable EPIN interrutps
|
|
sh $0, 0x08($27) // INTROUTE: disable EPOUT interrutps
|
|
|
|
li $9, 0x61
|
|
sb $9, 0x01($27) // POWER: HSENAB | SUSPENDM | SOFTCONN
|
|
|
|
//--------------------------------------------------------------
|
|
// Initialize USB states
|
|
//--------------------------------------------------------------
|
|
li $22, 0 // set EP0 to IDLE state
|
|
li $23, 1 // no data stage
|
|
|
|
//--------------------------------------------------------------
|
|
// Main loop of polling the usb commands
|
|
//--------------------------------------------------------------
|
|
usb_command_loop:
|
|
lbu $9, 0x0a($27) // read INTRUSB
|
|
andi $9, 0x04 // check USB_INTR_RESET
|
|
beqz $9, check_intr_ep0in
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 1. Handle USB reset interrupt
|
|
//--------------------------------------------------------------
|
|
handle_reset_intr:
|
|
lbu $9, 0x01($27) // read POWER
|
|
andi $9, 0x10 // test HS_MODE
|
|
bnez $9, _usb_set_maxpktsize
|
|
li $9, 512 // max packet size of HS mode
|
|
li $9, 64 // max packet size of FS mode
|
|
|
|
_usb_set_maxpktsize:
|
|
li $8, 1
|
|
sb $8, 0x0e($27) // set INDEX 1
|
|
|
|
sh $9, 0x10($27) // INMAXP
|
|
sb $0, 0x13($27) // INCSRH
|
|
sh $9, 0x14($27) // OUTMAXP
|
|
sb $0, 0x17($27) // OUTCSRH
|
|
|
|
_usb_flush_fifo:
|
|
li $8, 0x48 // INCSR_CDT && INCSR_FF
|
|
sb $8, 0x12($27) // INCSR
|
|
li $8, 0x90 // OUTCSR_CDT && OUTCSR_FF
|
|
sb $8, 0x16($27) // OUTCSR
|
|
|
|
li $22, 0 // set EP0 to IDLE state
|
|
li $23, 1 // no data stage
|
|
|
|
//--------------------------------------------------------------
|
|
// 2. Check and handle EP0 interrupt
|
|
//--------------------------------------------------------------
|
|
check_intr_ep0in:
|
|
lhu $10, 0x02($27) // read INTRIN
|
|
andi $9, $10, 0x1 // check EP0 interrupt
|
|
beqz $9, check_intr_ep1in
|
|
nop
|
|
|
|
handle_ep0_intr:
|
|
sb $0, 0x0e($27) // set INDEX 0
|
|
lbu $11, 0x12($27) // read CSR0
|
|
|
|
andi $9, $11, 0x04 // check SENTSTALL
|
|
beqz $9, _ep0_setupend
|
|
nop
|
|
|
|
_ep0_sentstall:
|
|
andi $9, $11, 0xdb
|
|
sb $9, 0x12($27) // clear SENDSTALL and SENTSTALL
|
|
li $22, 0 // set EP0 to IDLE state
|
|
|
|
_ep0_setupend:
|
|
andi $9, $11, 0x10 // check SETUPEND
|
|
beqz $9, ep0_idle_state
|
|
nop
|
|
|
|
ori $9, $11, 0x80
|
|
sb $9, 0x12($27) // set SVDSETUPEND
|
|
li $22, 0 // set EP0 to IDLE state
|
|
|
|
ep0_idle_state:
|
|
bnez $22, ep0_tx_state
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 2.1 Handle EP0 IDLE state interrupt
|
|
//--------------------------------------------------------------
|
|
andi $9, $11, 0x01 // check OUTPKTRDY
|
|
beqz $9, check_intr_ep1in
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// Read 8-bytes setup packet from the FIFO
|
|
//--------------------------------------------------------------
|
|
lw $25, 0x20($27) // first word of setup packet
|
|
lw $26, 0x20($27) // second word of setup packet
|
|
|
|
andi $9, $25, 0x60 // bRequestType & USB_TYPE_MASK
|
|
beqz $9, _ep0_std_req
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 2.1.1 Vendor-specific setup request
|
|
//--------------------------------------------------------------
|
|
_ep0_vend_req:
|
|
li $22, 0 // set EP0 to IDLE state
|
|
li $23, 1 // NoData = 1
|
|
|
|
andi $9, $25, 0xff00 // check bRequest
|
|
srl $9, $9, 8
|
|
beqz $9, __ep0_get_cpu_info
|
|
sub $8, $9, 0x1
|
|
beqz $8, __ep0_set_data_address
|
|
sub $8, $9, 0x2
|
|
beqz $8, __ep0_set_data_length
|
|
sub $8, $9, 0x3
|
|
beqz $8, __ep0_flush_caches
|
|
sub $8, $9, 0x4
|
|
beqz $8, __ep0_prog_start1
|
|
sub $8, $9, 0x5
|
|
beqz $8, __ep0_prog_start2
|
|
nop
|
|
b _ep0_idle_state_fini // invalid request
|
|
nop
|
|
|
|
__ep0_get_cpu_info:
|
|
load_addr $20, cpu_info_data // data pointer to transfer
|
|
li $21, 8 // bytes left to transfer
|
|
li $22, 1 // set EP0 to TX state
|
|
li $23, 0 // NoData = 0
|
|
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
__ep0_set_data_address:
|
|
li $9, 0xffff0000
|
|
and $9, $25, $9
|
|
andi $8, $26, 0xffff
|
|
or $20, $9, $8 // data address of next transfer
|
|
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
__ep0_set_data_length:
|
|
li $9, 0xffff0000
|
|
and $9, $25, $9
|
|
andi $8, $26, 0xffff
|
|
or $21, $9, $8 // data length of next transfer
|
|
|
|
li $9, 0x48 // SVDOUTPKTRDY and DATAEND
|
|
sb $9, 0x12($27) // CSR0
|
|
|
|
// We must write packet to FIFO before EP1-IN interrupt here.
|
|
b handle_epin1_intr
|
|
nop
|
|
|
|
__ep0_flush_caches:
|
|
// Flush dcache and invalidate icache.
|
|
li $8, 0x80000000
|
|
addi $9, $8, 0x3fe0 // total 16KB
|
|
|
|
1:
|
|
cache 0x0, 0($8) // Index_Invalidate_I
|
|
cache 0x1, 0($8) // Index_Writeback_Inv_D
|
|
bne $8, $9, 1b
|
|
addiu $8, $8, 32
|
|
|
|
// flush write-buffer
|
|
sync
|
|
|
|
// Invalidate BTB
|
|
mfc0 $8, $16, 7 // CP0_CONFIG
|
|
nop
|
|
ori $8, 2
|
|
mtc0 $8, $16, 7
|
|
nop
|
|
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
__ep0_prog_start1:
|
|
li $9, 0x48 // SVDOUTPKTRDY and DATAEND
|
|
sb $9, 0x12($27) // CSR0
|
|
|
|
li $9, 0xffff0000
|
|
and $9, $25, $9
|
|
andi $8, $26, 0xffff
|
|
or $20, $9, $8 // target address
|
|
|
|
b xfer_d2i
|
|
li $19, 0x2000 // 16KB data length
|
|
|
|
__ep0_prog_start2:
|
|
li $9, 0x48 // SVDOUTPKTRDY and DATAEND
|
|
sb $9, 0x12($27) // CSR0
|
|
|
|
li $9, 0xffff0000
|
|
and $9, $25, $9
|
|
andi $8, $26, 0xffff
|
|
or $20, $9, $8 // target address
|
|
|
|
jalr $20 // jump, and place the return address in $31
|
|
nop
|
|
|
|
__ep0_prog_start2_return:
|
|
// User code can return to here after executing itself, by jumping to $31.
|
|
b usb_boot_return
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 2.1.2 Standard setup request
|
|
//--------------------------------------------------------------
|
|
_ep0_std_req:
|
|
andi $12, $25, 0xff00 // check bRequest
|
|
srl $12, $12, 8
|
|
sub $9, $12, 0x05 // check USB_REQ_SET_ADDRESS
|
|
bnez $9, __ep0_req_set_config
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// Handle USB_REQ_SET_ADDRESS
|
|
//--------------------------------------------------------------
|
|
__ep0_req_set_addr:
|
|
srl $9, $25, 16 // get wValue
|
|
sb $9, 0x0($27) // set FADDR
|
|
li $23, 1 // NoData = 1
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
__ep0_req_set_config:
|
|
sub $9, $12, 0x09 // check USB_REQ_SET_CONFIGURATION
|
|
bnez $9, __ep0_req_get_desc
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// Handle USB_REQ_SET_CONFIGURATION
|
|
//--------------------------------------------------------------
|
|
li $23, 1 // NoData = 1
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
__ep0_req_get_desc:
|
|
sub $9, $12, 0x06 // check USB_REQ_GET_DESCRIPTOR
|
|
bnez $9, _ep0_idle_state_fini
|
|
li $23, 1 // NoData = 1
|
|
|
|
//--------------------------------------------------------------
|
|
// Handle USB_REQ_GET_DESCRIPTOR
|
|
//--------------------------------------------------------------
|
|
li $23, 0 // NoData = 0
|
|
|
|
srl $9, $25, 24 // wValue >> 8
|
|
sub $8, $9, 0x01 // check USB_DT_DEVICE
|
|
beqz $8, ___ep0_get_dev_desc
|
|
srl $21, $26, 16 // get wLength
|
|
sub $8, $9, 0x02 // check USB_DT_CONFIG
|
|
beqz $8, ___ep0_get_conf_desc
|
|
sub $8, $9, 0x03 // check USB_DT_STRING
|
|
beqz $8, ___ep0_get_string_desc
|
|
sub $8, $9, 0x06 // check USB_DT_DEVICE_QUALIFIER
|
|
beqz $8, ___ep0_get_dev_qualifier
|
|
nop
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
___ep0_get_dev_desc:
|
|
load_addr $20, device_desc // data pointer
|
|
li $22, 1 // set EP0 to TX state
|
|
sub $8, $21, 18
|
|
blez $8, _ep0_idle_state_fini // wLength <= 18
|
|
nop
|
|
li $21, 18 // max length of device_desc
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
___ep0_get_dev_qualifier:
|
|
load_addr $20, dev_qualifier // data pointer
|
|
li $22, 1 // set EP0 to TX state
|
|
sub $8, $21, 10
|
|
blez $8, _ep0_idle_state_fini // wLength <= 10
|
|
nop
|
|
li $21, 10 // max length of dev_qualifier
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
___ep0_get_conf_desc:
|
|
load_addr $20, config_desc_fs // data pointer of FS mode
|
|
lbu $8, 0x01($27) // read POWER
|
|
andi $8, 0x10 // test HS_MODE
|
|
beqz $8, ___ep0_get_conf_desc2
|
|
nop
|
|
load_addr $20, config_desc_hs // data pointer of HS mode
|
|
|
|
___ep0_get_conf_desc2:
|
|
li $22, 1 // set EP0 to TX state
|
|
sub $8, $21, 32
|
|
blez $8, _ep0_idle_state_fini // wLength <= 32
|
|
nop
|
|
li $21, 32 // max length of config_desc
|
|
b _ep0_idle_state_fini
|
|
nop
|
|
|
|
___ep0_get_string_desc:
|
|
li $22, 1 // set EP0 to TX state
|
|
|
|
srl $9, $25, 16 // wValue & 0xff
|
|
andi $9, 0xff
|
|
|
|
sub $8, $9, 1
|
|
beqz $8, ___ep0_get_string_manufacture
|
|
sub $8, $9, 2
|
|
beqz $8, ___ep0_get_string_product
|
|
nop
|
|
|
|
___ep0_get_string_lang_ids:
|
|
load_addr $20, string_lang_ids // data pointer
|
|
b _ep0_idle_state_fini
|
|
li $21, 4 // data length
|
|
|
|
___ep0_get_string_manufacture:
|
|
load_addr $20, string_manufacture // data pointer
|
|
b _ep0_idle_state_fini
|
|
li $21, 16 // data length
|
|
|
|
___ep0_get_string_product:
|
|
load_addr $20, string_product // data pointer
|
|
b _ep0_idle_state_fini
|
|
li $21, 46 // data length
|
|
|
|
_ep0_idle_state_fini:
|
|
li $9, 0x40 // SVDOUTPKTRDY
|
|
beqz $23, _ep0_idle_state_fini2
|
|
nop
|
|
ori $9, $9, 0x08 // DATAEND
|
|
_ep0_idle_state_fini2:
|
|
sb $9, 0x12($27) // CSR0
|
|
beqz $22, check_intr_ep1in
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 2.2 Handle EP0 TX state interrupt
|
|
//--------------------------------------------------------------
|
|
ep0_tx_state:
|
|
sub $9, $22, 1
|
|
bnez $9, check_intr_ep1in
|
|
nop
|
|
|
|
sub $9, $21, 64 // max packetsize
|
|
blez $9, _ep0_tx_state2 // data count <= 64
|
|
ori $19, $21, 0
|
|
li $19, 64
|
|
|
|
_ep0_tx_state2:
|
|
beqz $19, _ep0_tx_state3 // send ZLP
|
|
ori $18, $19, 0 // record bytes to be transferred
|
|
sub $21, $21, $19 // decrement data count
|
|
|
|
_ep0_fifo_write_loop:
|
|
lbu $9, 0($20) // read data
|
|
sb $9, 0x20($27) // load FIFO
|
|
sub $19, $19, 1 // decrement counter
|
|
bnez $19, _ep0_fifo_write_loop
|
|
addi $20, $20, 1 // increment data pointer
|
|
|
|
sub $9, $18, 64 // max packetsize
|
|
beqz $9, _ep0_tx_state4
|
|
nop
|
|
|
|
_ep0_tx_state3:
|
|
// transferred bytes < max packetsize
|
|
li $9, 0x0a // set INPKTRDY and DATAEND
|
|
sb $9, 0x12($27) // CSR0
|
|
li $22, 0 // set EP0 to IDLE state
|
|
b check_intr_ep1in
|
|
nop
|
|
|
|
_ep0_tx_state4:
|
|
// transferred bytes == max packetsize
|
|
li $9, 0x02 // set INPKTRDY
|
|
sb $9, 0x12($27) // CSR0
|
|
b check_intr_ep1in
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 3. Check and handle EP1 BULK-IN interrupt
|
|
//--------------------------------------------------------------
|
|
check_intr_ep1in:
|
|
andi $9, $10, 0x2 // check EP1 IN interrupt
|
|
beqz $9, check_intr_ep1out
|
|
nop
|
|
|
|
handle_epin1_intr:
|
|
li $9, 1
|
|
sb $9, 0x0e($27) // set INDEX 1
|
|
lbu $9, 0x12($27) // read INCSR
|
|
|
|
andi $8, $9, 0x2 // check INCSR_FFNOTEMPT
|
|
bnez $8, _epin1_tx_state4
|
|
nop
|
|
|
|
_epin1_write_fifo:
|
|
lhu $9, 0x10($27) // get INMAXP
|
|
sub $8, $21, $9
|
|
blez $8, _epin1_tx_state1 // bytes left <= INMAXP
|
|
ori $19, $21, 0
|
|
ori $19, $9, 0
|
|
|
|
_epin1_tx_state1:
|
|
beqz $19, _epin1_tx_state4 // No data
|
|
nop
|
|
|
|
sub $21, $21, $19 // decrement data count
|
|
|
|
srl $5, $19, 2 // # of word
|
|
andi $6, $19, 0x3 // # of byte
|
|
beqz $5, _epin1_tx_state2
|
|
nop
|
|
|
|
_epin1_fifo_write_word:
|
|
lw $9, 0($20) // read data from source address
|
|
sw $9, 0x24($27) // write FIFO
|
|
sub $5, $5, 1 // decrement counter
|
|
bnez $5, _epin1_fifo_write_word
|
|
addiu $20, $20, 4 // increment dest address
|
|
|
|
_epin1_tx_state2:
|
|
beqz $6, _epin1_tx_state3
|
|
nop
|
|
|
|
_epin1_fifo_write_byte:
|
|
lbu $9, 0($20) // read data from source address
|
|
sb $9, 0x24($27) // write FIFO
|
|
sub $6, $6, 1 // decrement counter
|
|
bnez $6, _epin1_fifo_write_byte
|
|
addiu $20, $20, 1 // increment dest address
|
|
|
|
_epin1_tx_state3:
|
|
li $9, 0x1
|
|
sb $9, 0x12($27) // INCSR, set INPKTRDY
|
|
|
|
_epin1_tx_state4:
|
|
// nop
|
|
|
|
//--------------------------------------------------------------
|
|
// 4. Check and handle EP1 BULK-OUT interrupt
|
|
//--------------------------------------------------------------
|
|
check_intr_ep1out:
|
|
lhu $9, 0x04($27) // read INTROUT
|
|
andi $9, 0x2
|
|
beqz $9, check_status_next
|
|
nop
|
|
|
|
handle_epout1_intr:
|
|
li $9, 1
|
|
sb $9, 0x0e($27) // set INDEX 1
|
|
|
|
lbu $9, 0x16($27) // read OUTCSR
|
|
andi $9, 0x1 // check OUTPKTRDY
|
|
beqz $9, check_status_next
|
|
nop
|
|
|
|
_epout1_read_fifo:
|
|
lhu $19, 0x18($27) // read OUTCOUNT
|
|
srl $5, $19, 2 // # of word
|
|
andi $6, $19, 0x3 // # of byte
|
|
beqz $5, _epout1_rx_state1
|
|
nop
|
|
|
|
_epout1_fifo_read_word:
|
|
lw $9, 0x24($27) // read FIFO
|
|
sw $9, 0($20) // store to dest address
|
|
sub $5, $5, 1 // decrement counter
|
|
bnez $5, _epout1_fifo_read_word
|
|
addiu $20, $20, 4 // increment dest address
|
|
|
|
_epout1_rx_state1:
|
|
beqz $6, _epout1_rx_state2
|
|
nop
|
|
|
|
_epout1_fifo_read_byte:
|
|
lbu $9, 0x24($27) // read FIFO
|
|
sb $9, 0($20) // store to dest address
|
|
sub $6, $6, 1 // decrement counter
|
|
bnez $6, _epout1_fifo_read_byte
|
|
addiu $20, $20, 1 // increment dest address
|
|
|
|
_epout1_rx_state2:
|
|
sb $0, 0x16($27) // clear OUTPKTRDY
|
|
|
|
check_status_next:
|
|
b usb_command_loop
|
|
nop
|
|
|
|
//--------------------------------------------------------------
|
|
// Device/Configuration/Interface/Endpoint/String Descriptors
|
|
//--------------------------------------------------------------
|
|
|
|
.align 2
|
|
device_desc:
|
|
.byte 0x12 // bLength
|
|
.byte 0x01 // bDescriptorType
|
|
.byte 0x00 // bcdUSB
|
|
.byte 0x02 // bcdUSB
|
|
.byte 0x00 // bDeviceClass
|
|
.byte 0x00 // bDeviceSubClass
|
|
.byte 0x00 // bDeviceProtocol
|
|
.byte 0x40 // bMaxPacketSize0
|
|
.byte 0x1a // idVendor
|
|
.byte 0x60 // idVendor
|
|
.byte 0x40 // idProduct
|
|
.byte 0x47 // idProduct
|
|
.byte 0x00 // bcdDevice
|
|
.byte 0x01 // bcdDevice
|
|
.byte 0x01 // iManufacturer
|
|
.byte 0x02 // iProduct
|
|
.byte 0x00 // iSerialNumber
|
|
.byte 0x01 // bNumConfigurations
|
|
|
|
.align 2
|
|
dev_qualifier:
|
|
.byte 0x0a // bLength
|
|
.byte 0x06 // bDescriptorType
|
|
.byte 0x00 // bcdUSB
|
|
.byte 0x02 // bcdUSB
|
|
.byte 0x00 // bDeviceClass
|
|
.byte 0x00 // bDeviceSubClass
|
|
.byte 0x00 // bDeviceProtocol
|
|
.byte 0x40 // bMaxPacketSize0
|
|
.byte 0x01 // bNumConfigurations
|
|
.byte 0x00 // bRESERVED
|
|
|
|
.align 2
|
|
config_desc_hs:
|
|
.byte 0x09 // bLength
|
|
.byte 0x02 // bDescriptorType
|
|
.byte 0x20 // wTotalLength
|
|
.byte 0x00 // wTotalLength
|
|
.byte 0x01 // bNumInterfaces
|
|
.byte 0x01 // bConfigurationValue
|
|
.byte 0x00 // iConfiguration
|
|
.byte 0xc0 // bmAttributes
|
|
.byte 0x01 // MaxPower
|
|
intf_desc_hs:
|
|
.byte 0x09 // bLength
|
|
.byte 0x04 // bDescriptorType
|
|
.byte 0x00 // bInterfaceNumber
|
|
.byte 0x00 // bAlternateSetting
|
|
.byte 0x02 // bNumEndpoints
|
|
.byte 0xff // bInterfaceClass
|
|
.byte 0x00 // bInterfaceSubClass
|
|
.byte 0x50 // bInterfaceProtocol
|
|
.byte 0x00 // iInterface
|
|
ep1_desc_hs:
|
|
.byte 0x07 // bLength
|
|
.byte 0x05 // bDescriptorType
|
|
.byte 0x01 // bEndpointAddress
|
|
.byte 0x02 // bmAttributes
|
|
.byte 0x00 // wMaxPacketSize
|
|
.byte 0x02 // wMaxPacketSize
|
|
.byte 0x00 // bInterval
|
|
ep2_desc_hs:
|
|
.byte 0x07 // bLength
|
|
.byte 0x05 // bDescriptorType
|
|
.byte 0x81 // bEndpointAddress
|
|
.byte 0x02 // bmAttributes
|
|
.byte 0x00 // wMaxPacketSize
|
|
.byte 0x02 // wMaxPacketSize
|
|
.byte 0x00 // bInterval
|
|
|
|
.align 2
|
|
config_desc_fs:
|
|
.byte 0x09 // bLength
|
|
.byte 0x02 // bDescriptorType
|
|
.byte 0x20 // wTotalLength
|
|
.byte 0x00 // wTotalLength
|
|
.byte 0x01 // bNumInterfaces
|
|
.byte 0x01 // bConfigurationValue
|
|
.byte 0x00 // iConfiguration
|
|
.byte 0xc0 // bmAttributes
|
|
.byte 0x01 // MaxPower
|
|
intf_desc_fs:
|
|
.byte 0x09 // bLength
|
|
.byte 0x04 // bDescriptorType
|
|
.byte 0x00 // bInterfaceNumber
|
|
.byte 0x00 // bAlternateSetting
|
|
.byte 0x02 // bNumEndpoints
|
|
.byte 0xff // bInterfaceClass
|
|
.byte 0x00 // bInterfaceSubClass
|
|
.byte 0x50 // bInterfaceProtocol
|
|
.byte 0x00 // iInterface
|
|
ep1_desc_fs:
|
|
.byte 0x07 // bLength
|
|
.byte 0x05 // bDescriptorType
|
|
.byte 0x01 // bEndpointAddress
|
|
.byte 0x02 // bmAttributes
|
|
.byte 0x40 // wMaxPacketSize
|
|
.byte 0x00 // wMaxPacketSize
|
|
.byte 0x00 // bInterval
|
|
ep2_desc_fs:
|
|
.byte 0x07 // bLength
|
|
.byte 0x05 // bDescriptorType
|
|
.byte 0x81 // bEndpointAddress
|
|
.byte 0x02 // bmAttributes
|
|
.byte 0x40 // wMaxPacketSize
|
|
.byte 0x00 // wMaxPacketSize
|
|
.byte 0x00 // bInterval
|
|
|
|
.align 2
|
|
string_lang_ids:
|
|
.byte 0x04
|
|
.byte 0x03
|
|
.byte 0x09
|
|
.byte 0x04
|
|
|
|
.align 2
|
|
string_manufacture:
|
|
.byte 0x10
|
|
.byte 0x03
|
|
.byte 0x49
|
|
.byte 0x00
|
|
.byte 0x6e
|
|
.byte 0x00
|
|
.byte 0x67
|
|
.byte 0x00
|
|
.byte 0x65
|
|
.byte 0x00
|
|
.byte 0x6e
|
|
.byte 0x00
|
|
.byte 0x69
|
|
.byte 0x00
|
|
.byte 0x63
|
|
.byte 0x00
|
|
|
|
.align 2
|
|
string_product:
|
|
.byte 0x2e
|
|
.byte 0x03
|
|
.byte 0x4a
|
|
.byte 0x00
|
|
.byte 0x5a
|
|
.byte 0x00
|
|
.byte 0x34
|
|
.byte 0x00
|
|
.byte 0x37
|
|
.byte 0x00
|
|
.byte 0x34
|
|
.byte 0x00
|
|
.byte 0x30
|
|
.byte 0x00
|
|
.byte 0x20
|
|
.byte 0x00
|
|
.byte 0x55
|
|
.byte 0x00
|
|
.byte 0x53
|
|
.byte 0x00
|
|
.byte 0x42
|
|
.byte 0x00
|
|
.byte 0x20
|
|
.byte 0x00
|
|
.byte 0x42
|
|
.byte 0x00
|
|
.byte 0x6f
|
|
.byte 0x00
|
|
.byte 0x6f
|
|
.byte 0x00
|
|
.byte 0x74
|
|
.byte 0x00
|
|
.byte 0x20
|
|
.byte 0x00
|
|
.byte 0x44
|
|
.byte 0x00
|
|
.byte 0x65
|
|
.byte 0x00
|
|
.byte 0x76
|
|
.byte 0x00
|
|
.byte 0x69
|
|
.byte 0x00
|
|
.byte 0x63
|
|
.byte 0x00
|
|
.byte 0x65
|
|
.byte 0x00
|
|
|
|
.align 2
|
|
cpu_info_data:
|
|
.byte 0x4a
|
|
.byte 0x5a
|
|
.byte 0x34
|
|
.byte 0x37
|
|
.byte 0x34
|
|
.byte 0x30
|
|
.byte 0x56
|
|
.byte 0x31
|
|
usbboot_end:
|
|
|
|
.set reorder
|