mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 21:59:34 +02:00
57ffcdaccd
This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
366 lines
14 KiB
Makefile
366 lines
14 KiB
Makefile
#
|
|
# Copyright (C) 2008-2011 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define imgname
|
|
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
|
|
endef
|
|
|
|
VMLINUX:=$(IMG_PREFIX)-vmlinux
|
|
UIMAGE:=$(IMG_PREFIX)-uImage
|
|
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
|
|
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
|
|
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
|
|
endif
|
|
|
|
ifeq ($(CONFIG_RALINK_RT288X),y)
|
|
define kernel_entry
|
|
-a 0x88000000 -e 0x88000000
|
|
endef
|
|
else
|
|
define kernel_entry
|
|
-a 0x80000000 -e 0x80000000
|
|
endef
|
|
endif
|
|
|
|
define CompressLzma
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
|
|
endef
|
|
|
|
define PatchKernelLzma
|
|
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
|
|
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
|
|
endef
|
|
|
|
define MkImage
|
|
mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(2) $(3)
|
|
endef
|
|
|
|
define Image/BuildKernel
|
|
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
|
|
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
|
|
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
|
|
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
|
|
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
|
|
endef
|
|
|
|
define BuildFirmware/Generic
|
|
$(call PatchKernelLzma,$(2),$(3) $($(4)))
|
|
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
|
|
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
|
|
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
|
|
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
|
|
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
|
else \
|
|
( \
|
|
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
|
) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
|
|
fi; fi
|
|
endef
|
|
|
|
define BuildFirmware/WL341V3
|
|
$(call PatchKernelLzma,$(2),$(3) $($(4)))
|
|
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
|
|
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
|
|
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
|
|
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
|
|
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
|
else \
|
|
( \
|
|
dd if=/dev/zero bs=195936 count=1; \
|
|
echo "1.01"; \
|
|
dd if=/dev/zero bs=581 count=1; \
|
|
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
|
|
dd if=/dev/zero bs=65552 count=1; \
|
|
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
|
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(5) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
|
|
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
|
|
) > $(call imgname,$(1),$(2))-factory.bin; \
|
|
fi; fi
|
|
endef
|
|
|
|
define BuildFirmware/Buffalo
|
|
$(call PatchKernelLzma,$(2),board=$(3) $($(4)))
|
|
$(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
|
|
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
|
|
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
|
|
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
|
|
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
|
else \
|
|
buffalo-enc -p $(3) -v 1.76 \
|
|
-i $(KDIR)/vmlinux-$(2).uImage \
|
|
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
|
|
buffalo-enc -p $(3) -v 1.76 \
|
|
-i $(KDIR)/root.$(1) \
|
|
-o $(KDIR)/root.$(2).enc; \
|
|
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
|
|
-l mlang8 -f 1 -r EU \
|
|
-i $(KDIR)/vmlinux-$(2).uImage.enc \
|
|
-i $(KDIR)/root.$(2).enc \
|
|
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
|
|
fi; fi
|
|
endef
|
|
|
|
define BuildFirmware/Buffalo2
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
|
|
endef
|
|
|
|
define BuildFirmware/NW718
|
|
$(call PatchKernelLzma,$(2),$(3) $($(4)))
|
|
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
|
|
-n "ARA1B4NCRNW718;1" \
|
|
-d "$(KDIR)/vmlinux-$(2).bin.lzma" \
|
|
"$(KDIR)/vmlinux-$(2).uImage"
|
|
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
|
|
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
|
|
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
|
|
echo "Warning: $(KDIR)/root.$(1) is too big"; \
|
|
else \
|
|
( \
|
|
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
|
) > $(call imgname,$(1),$(2))-factory.bin; \
|
|
fi; fi
|
|
endef
|
|
|
|
define BuildFirmware/Edimax
|
|
mkedimaximg -i $(call imgname,$(1),$(2))-sysupgrade.bin \
|
|
-o $(call imgname,$(1),$(2))-factory.bin \
|
|
-s $(3) -m $(4) -f $(5) -S $(6)
|
|
endef
|
|
|
|
mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
|
|
define Image/Build/Template/GENERIC_4M
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
|
|
endef
|
|
|
|
mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
|
|
kernel_size_8M=851968
|
|
rootfs_size_8M=7208960
|
|
define Image/Build/Template/GENERIC_8M
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
|
|
endef
|
|
|
|
mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
|
|
mtd_dir300b1_kernel_part_size=851968
|
|
mtd_dir300b1_rootfs_part_size=3014656
|
|
define Image/Build/Template/DIR300B1
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
|
|
mkwrgimg -s $(4) -d /dev/mtdblock/2 \
|
|
-i $(call imgname,$(1),$(2))-sysupgrade.bin \
|
|
-o $(call imgname,$(1),$(2))-factory.bin
|
|
endef
|
|
|
|
mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
|
|
define Image/Build/Template/NW718
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
|
|
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
|
|
endef
|
|
|
|
console_OMNIEMB=ttyS1,57600
|
|
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
|
|
define Image/Build/Template/OMNIEMB
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352)
|
|
endef
|
|
|
|
mtdlayout_sercomm_4M=mtdparts=physmap-flash.0:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,832k(kernel),2944k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
|
|
define Image/Build/Template/WL341V3
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
|
|
$(call BuildFirmware/WL341V3,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL341V3
|
|
$(call Image/Build/Template/WL341V3,$(1),wl341v3,WL341V3)
|
|
endef
|
|
|
|
define Image/Build/Profile/DIR300B1
|
|
$(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
|
|
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
|
|
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
|
|
endef
|
|
|
|
mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
|
|
mtd_rtg32b1_kernel_part_size=851968
|
|
mtd_rtg32b1_rootfs_part_size=3014656
|
|
define Image/Build/Template/RTG32B1
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
|
|
endef
|
|
|
|
define Image/Build/Profile/RTG32B1
|
|
$(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
|
|
endef
|
|
|
|
define Image/Build/Profile/ESR9753
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753)
|
|
endef
|
|
|
|
define Image/Build/Profile/FONERA20N
|
|
$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
|
|
$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
|
|
endef
|
|
|
|
define Image/Build/Profile/BC2
|
|
$(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2)
|
|
endef
|
|
|
|
define Image/Build/Profile/ALL0256N
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),all0256n,ALL0256N)
|
|
endef
|
|
|
|
define Image/Build/Profile/NBG419N
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL351
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351)
|
|
endef
|
|
|
|
define Image/Build/Profile/NW718
|
|
$(call Image/Build/Template/NW718,$(1),nw718,NW718)
|
|
endef
|
|
|
|
define Image/Build/Profile/OMNIEMB
|
|
$(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB)
|
|
endef
|
|
|
|
define Image/Build/Profile/PWH2004
|
|
$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
|
|
endef
|
|
|
|
define Image/Build/Profile/V22RW2X2
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
|
|
endef
|
|
|
|
mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
|
|
define Image/Build/Profile/WHRG300N
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
|
|
$(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
|
|
( \
|
|
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
|
|
dd bs=512 count=1 conv=sync; \
|
|
dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
|
|
) > $(KDIR)/whr-g300n-tftp.tmp
|
|
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
|
|
-o $(call imgname,$(1),whr-g300n)-tftp.bin
|
|
endef
|
|
|
|
define Image/Build/Profile/HW5503G
|
|
$(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
|
|
endef
|
|
|
|
define Image/Build/Profile/MOFI35003GN
|
|
$(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
|
|
endef
|
|
|
|
define Image/Build/Profile/WCR150GN
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
|
|
endef
|
|
|
|
w502u_cmdline=board=W502U console=ttyS1,115200
|
|
define Image/Build/Profile/W502U
|
|
$(call BuildFirmware/Generic,$(1),w502u,$(w502u_cmdline),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
|
|
endef
|
|
|
|
mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
|
|
mtd_argus_atp52b_kernel_part_size=1179648
|
|
mtd_argus_atp52b_rootfs_part_size=6815744
|
|
define Image/Build/Template/ARGUS_ATP52B
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
|
|
endef
|
|
|
|
define Image/Build/Profile/ARGUS_ATP52B
|
|
$(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
|
|
endef
|
|
|
|
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
|
|
mtd_f5d8235_kernel_part_size=1572864
|
|
mtd_f5d8235_rootfs_part_size=6356992
|
|
define Image/Build/Template/F5D8235V2
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
|
|
endef
|
|
|
|
define Image/Build/Profile/F5D8235V2
|
|
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
|
|
endef
|
|
|
|
define Image/Build/Template/F5D8235V1
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
|
|
endef
|
|
|
|
|
|
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
|
|
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
|
|
define Image/Build/Profile/WR5123GN
|
|
$(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
|
|
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
|
|
endef
|
|
|
|
ifeq ($(CONFIG_RALINK_RT305X),y)
|
|
define Image/Build/Profile/Default
|
|
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
|
|
$(call Image/Build/Profile/BC2,$(1))
|
|
$(call Image/Build/Profile/ALL0256N,$(1))
|
|
$(call Image/Build/Profile/DIR300B1,$(1))
|
|
$(call Image/Build/Profile/ESR9753,$(1))
|
|
$(call Image/Build/Profile/RTG32B1,$(1))
|
|
$(call Image/Build/Profile/FONERA20N,$(1))
|
|
$(call Image/Build/Profile/V22RW2X2,$(1))
|
|
$(call Image/Build/Profile/NBG419N,$(1))
|
|
$(call Image/Build/Profile/NW718,$(1))
|
|
$(call Image/Build/Profile/OMNIEMB,$(1))
|
|
$(call Image/Build/Profile/PWH2004,$(1))
|
|
$(call Image/Build/Profile/WHRG300N,$(1))
|
|
$(call Image/Build/Profile/WCR150GN,$(1))
|
|
$(call Image/Build/Profile/F5D8235V2,$(1))
|
|
$(call Image/Build/Profile/HW5503G,$(1))
|
|
$(call Image/Build/Profile/MOFI35003GN,$(1))
|
|
$(call Image/Build/Profile/W502U,$(1))
|
|
$(call Image/Build/Profile/WR5123GN,$(1))
|
|
$(call Image/Build/Profile/WL341V3,$(1))
|
|
$(call Image/Build/Profile/WL351,$(1))
|
|
endef
|
|
endif
|
|
|
|
define Image/Build/Profile/F5D8235V1
|
|
$(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
|
|
endef
|
|
|
|
define Image/Build/Profile/RTN15
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
|
|
endef
|
|
|
|
mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
|
|
define Image/Build/Profile/WLITX4AG300N
|
|
$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
|
|
endef
|
|
|
|
ifeq ($(CONFIG_RALINK_RT288X),y)
|
|
define Image/Build/Profile/Default
|
|
$(call Image/Build/Profile/F5D8235V1,$(1))
|
|
$(call Image/Build/Profile/RTN15,$(1))
|
|
$(call Image/Build/Profile/WLITX4AG300N,$(1))
|
|
endef
|
|
endif
|
|
|
|
define Image/Build/squashfs
|
|
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
|
endef
|
|
|
|
define Image/Build
|
|
$(call Image/Build/$(1))
|
|
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
|
|
$(call Image/Build/Profile/$(PROFILE),$(1))
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|