qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 00:49:43 +02:00
Code
3bcbd52978
openwrt-xburst/target/linux/brcm47xx/patches-3.6/060-ssb-add-serial-flash-driver.patch
hauke 1d70fe9050 brcm47xx: add support for kernel 3.6 
This is based on the patch by Peter Wagner.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 21:27:00 +00:00

528 lines
15 KiB
Diff
Raw Blame History

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -143,6 +143,11 @@ config SSB_EMBEDDED
depends on SSB_DRIVER_MIPS
default y
+config SSB_SFLASH
+ bool
+ depends on SSB_DRIVER_MIPS
+ default y
+
config SSB_DRIVER_EXTIF
bool "SSB Broadcom EXTIF core driver"
depends on SSB_DRIVER_MIPS
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
ssb-y += driver_chipcommon_pmu.o
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,395 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon serial flash interface
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2010, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+
+#include "ssb_private.h"
+
+#define NUM_RETRIES 3
+
+static struct resource ssb_sflash_resource = {
+ .name = "ssb_sflash",
+ .start = SSB_FLASH2,
+ .end = 0,
+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device ssb_sflash_dev = {
+ .name = "bcm47xx-sflash",
+ .resource = &ssb_sflash_resource,
+ .num_resources = 1,
+};
+
+struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+ u32 blocksize;
+ u16 numblocks;
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { "M25P16", 0x14, 0x10000, 32, },
+ { "M25P32", 0x14, 0x10000, 64, },
+ { "M25P64", 0x16, 0x10000, 128, },
+ { "M25FL128", 0x17, 0x10000, 256, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { "SST25VF010", 0x49, 0x1000, 32, },
+ { "SST25WF020", 3, 0x1000, 64, },
+ { "SST25VF020", 0x43, 0x1000, 64, },
+ { "SST25WF040", 4, 0x1000, 128, },
+ { "SST25VF040", 0x44, 0x1000, 128, },
+ { "SST25VF040B", 0x8d, 0x1000, 128, },
+ { "SST25WF080", 5, 0x1000, 256, },
+ { "SST25VF080B", 0x8e, 0x1000, 256, },
+ { "SST25VF016", 0x41, 0x1000, 512, },
+ { "SST25VF032", 0x4a, 0x1000, 1024, },
+ { "SST25VF064", 0x4b, 0x1000, 2048, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+ { "AT45DB081", 0x24, 256, 4096, },
+ { "AT45DB161", 0x2c, 512, 4096, },
+ { "AT45DB321", 0x34, 512, 8192, },
+ { "AT45DB642", 0x3c, 1024, 8192, },
+ { 0 },
+};
+
+static void ssb_sflash_cmd(struct ssb_chipcommon *chipco, u32 opcode)
+{
+ int i;
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL,
+ SSB_CHIPCO_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(chipco_read32(chipco, SSB_CHIPCO_FLASHCTL) &
+ SSB_CHIPCO_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("SFLASH control command failed (timeout)!\n");
+}
+
+static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte)
+{
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte);
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+static int ssb_sflash_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
+{
+ u8 *from, *to;
+ u32 cnt, i;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > chipco->sflash.size)
+ return -EINVAL;
+
+ if ((len >= 4) && (offset & 3))
+ cnt = 4 - (offset & 3);
+ else if ((len >= 4) && ((u32)buf & 3))
+ cnt = 4 - ((u32)buf & 3);
+ else
+ cnt = len;
+
+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
+
+ to = (u8 *)buf;
+
+ if (cnt < 4) {
+ for (i = 0; i < cnt; i++) {
+ *to = readb(from);
+ from++;
+ to++;
+ }
+ return cnt;
+ }
+
+ while (cnt >= 4) {
+ *(u32 *)to = readl(from);
+ from += 4;
+ to += 4;
+ cnt -= 4;
+ }
+
+ return len - cnt;
+}
+
+/* Poll for command completion. Returns zero when complete. */
+static int ssb_sflash_poll(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -22;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ /* Check for ST Write In Progress bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR);
+ return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_ST_WIP;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ /* Check for Atmel Ready bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_AT_READY);
+ }
+
+ return 0;
+}
+
+
+static int sflash_st_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int written = 1;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ /* Enable writes */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ ssb_sflash_write_u8(chipco, offset, *buf++);
+ /* Issue a page program with CSA bit set */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP);
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, poll droping cs and return */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+ } else {
+ /* Write single byte */
+ ssb_sflash_cmd(chipco,
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
+ *buf++);
+ }
+ written++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs & poll */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+}
+
+static int sflash_at_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+ u32 page, byte, mask;
+ int ret = 0;
+
+ mask = dev->blocksize - 1;
+ page = (offset & ~mask) << 1;
+ byte = offset & mask;
+ /* Read main memory page into buffer 1 */
+ if (byte || (len < dev->blocksize)) {
+ int i = 100;
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ while (i > 0 && ssb_sflash_poll(dev, offset)) {
+ udelay(10);
+ i--;
+ }
+ BUG_ON(!ssb_sflash_poll(dev, offset));
+ }
+ /* Write into buffer 1 */
+ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
+ ssb_sflash_write_u8(chipco, byte++, *buf++);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
+ }
+ /* Write buffer 1 into main memory page */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
+
+ return ret;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+static int ssb_sflash_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int ret = 0, tries = NUM_RETRIES;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ do {
+ ret = sflash_st_write(dev, offset, len, buf);
+ tries--;
+ } while (ret == -EAGAIN && tries > 0);
+
+ if (ret == -EAGAIN && tries == 0) {
+ pr_info("ST Flash rejected write\n");
+ ret = -EIO;
+ }
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ret = sflash_at_write(dev, offset, len, buf);
+ break;
+ }
+
+ return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+static int ssb_sflash_erase(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ /* Newer flashes have "sub-sectors" which can be erased independently
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
+ * before.
+ */
+ if (dev->blocksize < (64 * 1024))
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE);
+ else
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE);
+ return dev->blocksize;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
+ return dev->blocksize;
+ }
+
+ return 0;
+}
+
+/* Initialize serial flash achipcoess */
+int ssb_sflash_init(struct ssb_chipcommon *chipco)
+{
+ struct bcm47xx_sflash *sflash = &chipco->sflash;
+ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_DP);
+
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, 0);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA);
+
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, 1);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id2 = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA);
+
+ switch (id) {
+ case 0xbf:
+ for (e = ssb_sflash_sst_tbl; e->name; e++) {
+ if (e->id == id2)
+ break;
+ }
+ break;
+ case 0x13:
+ return -ENOTSUPP;
+ default:
+ for (e = ssb_sflash_st_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
+ return -ENOTSUPP;
+ }
+
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ id = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA) & 0x3c;
+
+ for (e = ssb_sflash_at_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", id);
+ return -ENOTSUPP;
+ }
+
+ break;
+ default:
+ pr_err("Unsupported flash type\n");
+ return -ENOTSUPP;
+ }
+
+ sflash->window = SSB_FLASH2;
+ sflash->blocksize = e->blocksize;
+ sflash->numblocks = e->numblocks;
+ sflash->size = sflash->blocksize * sflash->numblocks;
+ sflash->present = true;
+ sflash->read = ssb_sflash_read;
+ sflash->poll = ssb_sflash_poll;
+ sflash->write = ssb_sflash_write;
+ sflash->erase = ssb_sflash_erase;
+ sflash->type = BCM47XX_SFLASH_SSB;
+ sflash->scc = chipco;
+
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, sflash->blocksize,
+ sflash->numblocks);
+
+ /* Prepare platform device, but don't register it yet. It's too early,
+ * malloc (required by device_private_init) is not available yet. */
+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+ sflash->size;
+ ssb_sflash_dev.dev.platform_data = sflash;
+
+ return 0;
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -203,7 +203,8 @@ static void ssb_mips_flash_detect(struct
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
- pr_err("Serial flash not supported\n");
+ pr_debug("Found serial flash\n");
+ ssb_sflash_init(&bus->chipco);
break;
case SSB_CHIPCO_FLASHT_PARA:
pr_debug("Found parallel flash\n");
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -18,6 +18,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <linux/mmc/sdio_func.h>
#include <linux/slab.h>
@@ -534,6 +535,15 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+#ifdef CONFIG_SSB_SFLASH
+ if (bus->chipco.sflash.present) {
+ err = platform_device_register(&ssb_sflash_dev);
+ if (err)
+ ssb_printk(KERN_ERR PFX
+ "Error registering serial flash\n");
+ }
+#endif
+
return 0;
error:
/* Unwind the already registered devices. */
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -211,4 +211,16 @@ static inline void b43_pci_ssb_bridge_ex
extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
+#ifdef CONFIG_SSB_SFLASH
+/* driver_chipcommon_sflash.c */
+int ssb_sflash_init(struct ssb_chipcommon *chipco);
+extern struct platform_device ssb_sflash_dev;
+#else
+static inline int ssb_sflash_init(struct ssb_chipcommon *chipco)
+{
+ pr_err("Serial flash not supported\n");
+ return 0;
+}
+#endif /* CONFIG_SSB_SFLASH */
+
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -13,6 +13,8 @@
* Licensed under the GPL version 2. See COPYING for details.
*/
+#include <linux/mtd/bcm47xx_sflash.h>
+
/** ChipCommon core registers. **/
#define SSB_CHIPCO_CHIPID 0x0000
@@ -121,6 +123,17 @@
#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
#define SSB_CHIPCO_FLASHADDR 0x0044
#define SSB_CHIPCO_FLASHDATA 0x0048
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
+#define SSB_CHIPCO_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT 2
+#define SSB_CHIPCO_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHDATA_AT_READY 0x80
+#define SSB_CHIPCO_FLASHDATA_AT_MISMATCH 0x40
+#define SSB_CHIPCO_FLASHDATA_AT_ID_MASK 0x38
+#define SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT 3
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
@@ -503,7 +516,7 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
@@ -591,6 +604,9 @@ struct ssb_chipcommon {
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct ssb_chipcommon_pmu pmu;
+#ifdef CONFIG_SSB_SFLASH
+ struct bcm47xx_sflash sflash;
+#endif
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
View Git Blame Copy Permalink