mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-05 03:21:54 +02:00
c756188f9a
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24505 3c298f89-4303-0410-b956-a3cf2f4a3e73
222 lines
9.4 KiB
Diff
222 lines
9.4 KiB
Diff
--- a/nl80211.h
|
|
+++ b/nl80211.h
|
|
@@ -295,7 +295,9 @@
|
|
* auth and assoc steps. For this, you need to specify the SSID in a
|
|
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
|
|
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
|
|
- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
|
|
+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
|
|
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
|
|
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
|
|
* It is also sent as an event, with the BSSID and response IEs when the
|
|
* connection is established or failed to be established. This can be
|
|
* determined by the STATUS_CODE attribute.
|
|
@@ -313,8 +315,8 @@
|
|
* channel for the specified amount of time. This can be used to do
|
|
* off-channel operations like transmit a Public Action frame and wait for
|
|
* a response while being associated to an AP on another channel.
|
|
- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
|
|
- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
|
|
+ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
|
|
+ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
|
|
* frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
|
|
* optionally used to specify additional channel parameters.
|
|
* %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
|
|
@@ -385,6 +387,8 @@
|
|
* of any other interfaces, and other interfaces will again take
|
|
* precedence when they are used.
|
|
*
|
|
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
|
|
+ *
|
|
* @NL80211_CMD_MAX: highest used command number
|
|
* @__NL80211_CMD_AFTER_LAST: internal use
|
|
*/
|
|
@@ -487,6 +491,7 @@ enum nl80211_commands {
|
|
NL80211_CMD_NOTIFY_CQM,
|
|
|
|
NL80211_CMD_SET_CHANNEL,
|
|
+ NL80211_CMD_SET_WDS_PEER,
|
|
|
|
/* add new commands above here */
|
|
|
|
@@ -686,6 +691,15 @@ enum nl80211_commands {
|
|
* request, the driver will assume that the port is unauthorized until
|
|
* authorized by user space. Otherwise, port is marked authorized by
|
|
* default in station mode.
|
|
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
|
|
+ * ethertype that will be used for key negotiation. It can be
|
|
+ * specified with the associate and connect commands. If it is not
|
|
+ * specified, the value defaults to 0x888E (PAE, 802.1X). This
|
|
+ * attribute is also used as a flag in the wiphy information to
|
|
+ * indicate that protocols other than PAE are supported.
|
|
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
|
|
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
|
|
+ * ethertype frames used for key negotiation must not be encrypted.
|
|
*
|
|
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
|
|
* We recommend using nested, driver-specific attributes within this.
|
|
@@ -787,6 +801,33 @@ enum nl80211_commands {
|
|
* This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
|
|
* for non-automatic settings.
|
|
*
|
|
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
|
|
+ * means support for per-station GTKs.
|
|
+ *
|
|
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
|
|
+ * This can be used to mask out antennas which are not attached or should
|
|
+ * not be used for transmitting. If an antenna is not selected in this
|
|
+ * bitmap the hardware is not allowed to transmit on this antenna.
|
|
+ *
|
|
+ * Each bit represents one antenna, starting with antenna 1 at the first
|
|
+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
|
|
+ * drivers can derive which chainmasks to use (if all antennas belonging to
|
|
+ * a particular chain are disabled this chain should be disabled) and if
|
|
+ * a chain has diversity antennas wether diversity should be used or not.
|
|
+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
|
|
+ * derived from the available chains after applying the antenna mask.
|
|
+ * Non-802.11n drivers can derive wether to use diversity or not.
|
|
+ * Drivers may reject configurations or RX/TX mask combinations they cannot
|
|
+ * support by returning -EINVAL.
|
|
+ *
|
|
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
|
|
+ * This can be used to mask out antennas which are not attached or should
|
|
+ * not be used for receiving. If an antenna is not selected in this bitmap
|
|
+ * the hardware should not be configured to receive on this antenna.
|
|
+ * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
|
|
+ *
|
|
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
|
|
+ *
|
|
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
|
* @__NL80211_ATTR_AFTER_LAST: internal use
|
|
*/
|
|
@@ -951,6 +992,16 @@ enum nl80211_attrs {
|
|
NL80211_ATTR_RX_FRAME_TYPES,
|
|
NL80211_ATTR_FRAME_TYPE,
|
|
|
|
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
|
|
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
|
|
+
|
|
+ NL80211_ATTR_SUPPORT_IBSS_RSN,
|
|
+
|
|
+ NL80211_ATTR_WIPHY_ANTENNA_TX,
|
|
+ NL80211_ATTR_WIPHY_ANTENNA_RX,
|
|
+
|
|
+ NL80211_ATTR_MCAST_RATE,
|
|
+
|
|
/* add attributes here, update the policy in nl80211.c */
|
|
|
|
__NL80211_ATTR_AFTER_LAST,
|
|
@@ -1006,6 +1057,8 @@ enum nl80211_attrs {
|
|
* @NL80211_IFTYPE_WDS: wireless distribution interface
|
|
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
|
|
* @NL80211_IFTYPE_MESH_POINT: mesh point
|
|
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
|
|
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
|
|
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
|
|
* @NUM_NL80211_IFTYPES: number of defined interface types
|
|
*
|
|
@@ -1022,6 +1075,8 @@ enum nl80211_iftype {
|
|
NL80211_IFTYPE_WDS,
|
|
NL80211_IFTYPE_MONITOR,
|
|
NL80211_IFTYPE_MESH_POINT,
|
|
+ NL80211_IFTYPE_P2P_CLIENT,
|
|
+ NL80211_IFTYPE_P2P_GO,
|
|
|
|
/* keep last */
|
|
NUM_NL80211_IFTYPES,
|
|
@@ -1111,6 +1166,8 @@ enum nl80211_rate_info {
|
|
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
|
|
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
|
|
* station)
|
|
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
|
|
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
|
|
*/
|
|
enum nl80211_sta_info {
|
|
__NL80211_STA_INFO_INVALID,
|
|
@@ -1124,6 +1181,8 @@ enum nl80211_sta_info {
|
|
NL80211_STA_INFO_TX_BITRATE,
|
|
NL80211_STA_INFO_RX_PACKETS,
|
|
NL80211_STA_INFO_TX_PACKETS,
|
|
+ NL80211_STA_INFO_TX_RETRIES,
|
|
+ NL80211_STA_INFO_TX_FAILED,
|
|
|
|
/* keep last */
|
|
__NL80211_STA_INFO_AFTER_LAST,
|
|
@@ -1277,7 +1336,11 @@ enum nl80211_bitrate_attr {
|
|
* wireless core it thinks its knows the regulatory domain we should be in.
|
|
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
|
|
* 802.11 country information element with regulatory information it
|
|
- * thinks we should consider.
|
|
+ * thinks we should consider. cfg80211 only processes the country
|
|
+ * code from the IE, and relies on the regulatory domain information
|
|
+ * structure pased by userspace (CRDA) from our wireless-regdb.
|
|
+ * If a channel is enabled but the country code indicates it should
|
|
+ * be disabled we disable the channel and re-enable it upon disassociation.
|
|
*/
|
|
enum nl80211_reg_initiator {
|
|
NL80211_REGDOM_SET_BY_CORE,
|
|
@@ -1382,6 +1445,17 @@ enum nl80211_reg_rule_flags {
|
|
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
|
|
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
|
|
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
|
|
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
|
|
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
|
|
+ * spent on this channel
|
|
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
|
|
+ * channel was sensed busy (either due to activity or energy detect)
|
|
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
|
|
+ * channel was sensed busy
|
|
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
|
|
+ * receiving data
|
|
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
|
|
+ * transmitting data
|
|
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
|
|
* currently defined
|
|
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
|
|
@@ -1390,6 +1464,12 @@ enum nl80211_survey_info {
|
|
__NL80211_SURVEY_INFO_INVALID,
|
|
NL80211_SURVEY_INFO_FREQUENCY,
|
|
NL80211_SURVEY_INFO_NOISE,
|
|
+ NL80211_SURVEY_INFO_IN_USE,
|
|
+ NL80211_SURVEY_INFO_CHANNEL_TIME,
|
|
+ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
|
|
+ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
|
|
+ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
|
|
+ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
|
|
|
|
/* keep last */
|
|
__NL80211_SURVEY_INFO_AFTER_LAST,
|
|
@@ -1636,11 +1716,14 @@ enum nl80211_auth_type {
|
|
* @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
|
|
* @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
|
|
* @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
|
|
+ * @NUM_NL80211_KEYTYPES: number of defined key types
|
|
*/
|
|
enum nl80211_key_type {
|
|
NL80211_KEYTYPE_GROUP,
|
|
NL80211_KEYTYPE_PAIRWISE,
|
|
NL80211_KEYTYPE_PEERKEY,
|
|
+
|
|
+ NUM_NL80211_KEYTYPES
|
|
};
|
|
|
|
/**
|
|
@@ -1671,6 +1754,9 @@ enum nl80211_wpa_versions {
|
|
* CCMP keys, each six bytes in little endian
|
|
* @NL80211_KEY_DEFAULT: flag indicating default key
|
|
* @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
|
|
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
|
|
+ * specified the default depends on whether a MAC address was
|
|
+ * given with the command using the key or not (u32)
|
|
* @__NL80211_KEY_AFTER_LAST: internal
|
|
* @NL80211_KEY_MAX: highest key attribute
|
|
*/
|
|
@@ -1682,6 +1768,7 @@ enum nl80211_key_attributes {
|
|
NL80211_KEY_SEQ,
|
|
NL80211_KEY_DEFAULT,
|
|
NL80211_KEY_DEFAULT_MGMT,
|
|
+ NL80211_KEY_TYPE,
|
|
|
|
/* keep last */
|
|
__NL80211_KEY_AFTER_LAST,
|