nbd 455e74f063 Several small fixes for ar8216 driver (patch by Jonas Gorski) ... * Create defines for some magic values/masks. * Change vlan_id to u16, to allow VIDs > 255. * Add a range check to set_pvid as it isn't a VID, but the index in the vlan table. * Set the max VID to 4094, since 4095 is a reserved value and should not be used. * In mangle_rx replace the provided VID with the VID of the table entry of the port, not the index of the table. * In hw_apply, remove a redundant emptyness check (was already checked several lines above). * In no vlan mode do not set the ingress mode to secure, as there are no vlan table entries, but to use the port's destination masks. Otherwise the switch won't forward anything. * In read_status tell that the phy is up (taken from the rtl8306 driver). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-03-09 14:35:41 +00:00
..
char	deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/	2009-12-25 10:34:21 +00:00
input/misc	kernel: change debounce logic in the gpio-buttons driver	2010-01-13 10:18:24 +00:00
leds	deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/	2009-12-25 10:34:21 +00:00
mtd	[kernel] generic-2.6: make MyLoader parser compatible with the old partition tables	2009-01-23 11:54:44 +00:00
net/phy	Several small fixes for ar8216 driver (patch by Jonas Gorski)	2010-03-09 14:35:41 +00:00