1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:39:25 +02:00
openwrt-xburst/package/linux/kernel-source/drivers/net/hnd/sbutils.c
wbx 4f531230a3 add all source code from linksys/broadcom which is free, to cvs for better maintainence inside
openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2005-03-16 13:50:00 +00:00

2165 lines
49 KiB
C

/*
* Misc utility routines for accessing chip-specific features
* of the SiliconBackplane-based Broadcom chips.
*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
* $Id$
*/
#include <typedefs.h>
#include <osl.h>
#include <bcmutils.h>
#include <bcmdevs.h>
#include <sbconfig.h>
#include <sbchipc.h>
#include <sbpci.h>
#include <pcicfg.h>
#include <sbpcmcia.h>
#include <sbextif.h>
#include <sbutils.h>
#include <bcmsrom.h>
/* debug/trace */
#define SB_ERROR(args)
typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
typedef bool (*sb_intrsenabled_t)(void *intr_arg);
/* misc sb info needed by some of the routines */
typedef struct sb_info {
uint chip; /* chip number */
uint chiprev; /* chip revision */
uint chippkg; /* chip package option */
uint boardtype; /* board type */
uint boardvendor; /* board vendor id */
uint bus; /* what bus type we are going through */
void *osh; /* osl os handle */
void *sdh; /* bcmsdh handle */
void *curmap; /* current regs va */
void *regs[SB_MAXCORES]; /* other regs va */
uint curidx; /* current core index */
uint dev_coreid; /* the core provides driver functions */
uint pciidx; /* pci core index */
uint pcirev; /* pci core rev */
uint pcmciaidx; /* pcmcia core index */
uint pcmciarev; /* pcmcia core rev */
bool memseg; /* flag to toggle MEM_SEG register */
uint ccrev; /* chipc core rev */
uint gpioidx; /* gpio control core index */
uint gpioid; /* gpio control coretype */
uint numcores; /* # discovered cores */
uint coreid[SB_MAXCORES]; /* id of each core */
void *intr_arg; /* interrupt callback function arg */
sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */
} sb_info_t;
/* local prototypes */
static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
static void sb_scan(sb_info_t *si);
static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
static uint _sb_coreidx(void *sbh);
static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
static uint sb_pcidev2chip(uint pcidev);
static uint sb_chip2numcores(uint chip);
#define SB_INFO(sbh) (sb_info_t*)sbh
#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE))
#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE))
#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
#define BADIDX (SB_MAXCORES+1)
#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
/*
* Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
* after core switching to avoid invalid register accesss inside ISR.
*/
#define INTR_OFF(si, intr_val) \
if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
#define INTR_RESTORE(si, intr_val) \
if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
/* power control defines */
#define LPOMINFREQ 25000 /* low power oscillator min */
#define LPOMAXFREQ 43000 /* low power oscillator max */
#define XTALMINFREQ 19800000 /* 20mhz - 1% */
#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
#define PCIMINFREQ 25000000 /* 25mhz */
#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
#define SCC_DEF_DIV 0 /* default slow clock divider */
#define XTAL_ON_DELAY 1000 /* Xtal power on delay in us */
#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
static uint32
sb_read_sbreg(void *sbh, volatile uint32 *sbr)
{
sb_info_t *si;
uint8 tmp;
uint32 val, intr_val = 0;
si = SB_INFO(sbh);
/*
* compact flash only has 11 bits address, while we needs 12 bits address.
* MEM_SEG will be OR'd with other 11 bits address in hardware,
* so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
* For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
*/
if(si->memseg) {
INTR_OFF(si, intr_val);
tmp = 1;
OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
(uint32)sbr &= ~(1 << 11); /* mask out bit 11*/
}
val = R_REG(sbr);
if(si->memseg) {
tmp = 0;
OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
INTR_RESTORE(si, intr_val);
}
return (val);
}
static void
sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
{
sb_info_t *si;
uint8 tmp;
volatile uint32 dummy;
uint32 intr_val = 0;
si = SB_INFO(sbh);
/*
* compact flash only has 11 bits address, while we needs 12 bits address.
* MEM_SEG will be OR'd with other 11 bits address in hardware,
* so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
* For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
*/
if(si->memseg) {
INTR_OFF(si, intr_val);
tmp = 1;
OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
(uint32)sbr &= ~(1 << 11); /* mask out bit 11 */
}
if (si->bus == PCMCIA_BUS) {
#ifdef IL_BIGENDIAN
dummy = R_REG(sbr);
W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
dummy = R_REG(sbr);
W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
#else
dummy = R_REG(sbr);
W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
dummy = R_REG(sbr);
W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
#endif
} else
W_REG(sbr, v);
if(si->memseg) {
tmp = 0;
OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
INTR_RESTORE(si, intr_val);
}
}
/*
* Allocate a sb handle.
* devid - pci device id (used to determine chip#)
* osh - opaque OS handle
* regs - virtual address of initial core registers
* bustype - pci/pcmcia/sb/sdio/etc
* vars - pointer to a pointer area for "environment" variables
* varsz - pointer to int to return the size of the vars
*/
void*
sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
{
sb_info_t *si;
/* alloc sb_info_t */
if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
SB_ERROR(("sb_attach: malloc failed!\n"));
return (NULL);
}
return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
}
/* global kernel resource */
static sb_info_t ksi;
/* generic kernel variant of sb_attach() */
void*
sb_kattach()
{
uint32 *regs;
char *unused;
int varsz;
if (ksi.curmap == NULL) {
uint32 cid;
regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
cid = R_REG((uint32 *)regs);
if (((cid & CID_ID_MASK) == 0x4712) &&
((cid & CID_REV_MASK) <= 0x00020000)) {
uint32 *scc, val;
scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
val = R_REG(scc);
SB_ERROR((" initial scc = 0x%x\n", val));
val |= SCC_SS_XTAL;
W_REG(scc, val);
}
sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
SB_BUS, NULL, &unused, &varsz);
}
return &ksi;
}
static void*
sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
{
uint origidx;
chipcregs_t *cc;
uint32 w;
ASSERT(GOODREGS(regs));
bzero((uchar*)si, sizeof (sb_info_t));
si->pciidx = si->gpioidx = BADIDX;
si->osh = osh;
si->curmap = regs;
si->sdh = sdh;
/* check to see if we are a sb core mimic'ing a pci core */
if (bustype == PCI_BUS) {
if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
bustype = SB_BUS;
else
bustype = PCI_BUS;
}
si->bus = bustype;
if (si->bus == PCMCIA_BUS)
/* need to set memseg flag for CF card first before any sb registers access,
* such as the access inside sb_scan. the card type is detected and memseg
* flag is reassigned later after srom_var_init. there should be no effect
* for PCMCIA cards even though the memseg flag is set
*/
si->memseg = TRUE;
/* kludge to enable the clock on the 4306 which lacks a slowclock */
if (si->bus == PCI_BUS)
sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
/* initialize current core index value */
si->curidx = _sb_coreidx((void*)si);
if (si->curidx == BADIDX)
goto bad;
/* keep and reuse the initial register mapping */
origidx = si->curidx;
if (si->bus == SB_BUS)
si->regs[origidx] = regs;
/* is core-0 a chipcommon core? */
si->numcores = 1;
cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
if (sb_coreid((void*)si) != SB_CC)
cc = NULL;
/* determine chip id and rev */
if (cc) {
/* chip common core found! */
si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
} else {
/* The only pcmcia chip without a chipcommon core is a 4301 */
if (si->bus == PCMCIA_BUS)
devid = BCM4301_DEVICE_ID;
/* no chip common core -- must convert device id to chip id */
if ((si->chip = sb_pcidev2chip(devid)) == 0) {
SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
goto bad;
}
}
/* get chipcommon rev */
si->ccrev = cc? sb_corerev((void*)si) : 0;
/* determine numcores */
if ((si->ccrev == 4) || (si->ccrev >= 6))
si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
else
si->numcores = sb_chip2numcores(si->chip);
/* return to original core */
sb_setcoreidx((void*)si, origidx);
/* sanity checks */
ASSERT(si->chip);
/* scan for cores */
sb_scan(si);
/* initialize the vars after sb_scan so that the core rev. information
* collected by sb_scan is available for the srom_var_init.
*/
if (srom_var_init(si, si->bus, si->curmap, osh, vars, varsz)) {
SB_ERROR(("sb_attach: srom_var_init failed\n"));
goto bad;
}
if (cc == NULL) {
/*
* The chip revision number is hardwired into all
* of the pci function config rev fields and is
* independent from the individual core revision numbers.
* For example, the "A0" silicon of each chip is chip rev 0.
* For PCMCIA we get it from the CIS instead.
*/
if (si->bus == PCMCIA_BUS) {
ASSERT(vars);
si->chiprev = getintvar(*vars, "chiprev");
} else if (si->bus == PCI_BUS) {
w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
si->chiprev = w & 0xff;
} else
si->chiprev = 0;
}
if (si->bus == PCMCIA_BUS) {
w = getintvar(*vars, "regwindowsz");
si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
}
/* pci core is required */
if (!GOODIDX(si->pciidx)) {
SB_ERROR(("sb_attach: pci core not found\n"));
goto bad;
}
/* gpio control core is required */
if (!GOODIDX(si->gpioidx)) {
SB_ERROR(("sb_attach: gpio control core not found\n"));
goto bad;
}
/* get boardtype and boardrev */
switch (si->bus) {
case PCI_BUS:
/* do a pci config read to get subsystem id and subvendor id */
w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
si->boardvendor = w & 0xffff;
si->boardtype = (w >> 16) & 0xffff;
break;
case PCMCIA_BUS:
case SDIO_BUS:
si->boardvendor = getintvar(*vars, "manfid");
si->boardtype = getintvar(*vars, "prodid");
break;
case SB_BUS:
si->boardvendor = VENDOR_BROADCOM;
si->boardtype = 0xffff;
break;
}
if (si->boardtype == 0) {
SB_ERROR(("sb_attach: unknown board type\n"));
ASSERT(si->boardtype);
}
/* clear any previous epidiag-induced target abort */
sb_taclear((void*)si);
return ((void*)si);
bad:
MFREE(si, sizeof (sb_info_t));
return (NULL);
}
uint
sb_coreid(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
}
uint
sb_coreidx(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->curidx);
}
/* return current index of core */
static uint
_sb_coreidx(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
uint32 sbaddr = 0;
si = SB_INFO(sbh);
ASSERT(si);
switch (si->bus) {
case SB_BUS:
sb = REGS2SB(si->curmap);
sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
break;
case PCI_BUS:
sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
break;
case PCMCIA_BUS: {
uint8 tmp;
OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
sbaddr = (uint)tmp << 12;
OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
sbaddr |= (uint)tmp << 16;
OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
sbaddr |= (uint)tmp << 24;
break;
}
default:
ASSERT(0);
}
if (!GOODCOREADDR(sbaddr))
return BADIDX;
return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
}
uint
sb_corevendor(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
}
uint
sb_corerev(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
}
#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
/* set/clear sbtmstatelow core-specific flags */
uint32
sb_coreflags(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
sbconfig_t *sb;
uint32 w;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
ASSERT((val & ~mask) == 0);
ASSERT((mask & ~SBTML_ALLOW) == 0);
/* mask and set */
if (mask || val) {
w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
W_SBREG(sbh, &sb->sbtmstatelow, w);
}
/* return the new value */
return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
}
/* set/clear sbtmstatehigh core-specific flags */
uint32
sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
sbconfig_t *sb;
uint32 w;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
ASSERT((val & ~mask) == 0);
ASSERT((mask & ~SBTMH_FL_MASK) == 0);
/* mask and set */
if (mask || val) {
w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
W_SBREG(sbh, &sb->sbtmstatehigh, w);
}
/* return the new value */
return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
}
bool
sb_iscoreup(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
si = SB_INFO(sbh);
sb = REGS2SB(si->curmap);
return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
}
/*
* Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
* switch back to the original core, and return the new value.
*/
static uint
sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
{
sb_info_t *si;
uint origidx;
uint32 *r;
uint w;
uint intr_val = 0;
ASSERT(GOODIDX(coreidx));
ASSERT(regoff < SB_CORE_SIZE);
ASSERT((val & ~mask) == 0);
si = SB_INFO(sbh);
INTR_OFF(si, intr_val);
/* save current core index */
origidx = sb_coreidx(sbh);
/* switch core */
r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
/* mask and set */
if (mask || val) {
if (regoff >= SBCONFIGOFF) {
w = (R_SBREG(sbh, r) & ~mask) | val;
W_SBREG(sbh, r, w);
} else {
w = (R_REG(r) & ~mask) | val;
W_REG(r, w);
}
}
/* readback */
if (regoff >= SBCONFIGOFF)
w = R_SBREG(sbh, r);
else
w = R_REG(r);
/* restore core index */
if (origidx != coreidx)
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
return (w);
}
/* scan the sb enumerated space to identify all cores */
static void
sb_scan(sb_info_t *si)
{
void *sbh;
uint origidx;
uint i;
sbh = (void*) si;
/* numcores should already be set */
ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
/* save current core index */
origidx = sb_coreidx(sbh);
si->pciidx = si->gpioidx = BADIDX;
for (i = 0; i < si->numcores; i++) {
sb_setcoreidx(sbh, i);
si->coreid[i] = sb_coreid(sbh);
if (si->coreid[i] == SB_PCI) {
si->pciidx = i;
si->pcirev = sb_corerev(sbh);
} else if (si->coreid[i] == SB_PCMCIA) {
si->pcmciaidx = i;
si->pcmciarev = sb_corerev(sbh);
}
}
/*
* Find the gpio "controlling core" type and index.
* Precedence:
* - if there's a chip common core - use that
* - else if there's a pci core (rev >= 2) - use that
* - else there had better be an extif core (4710 only)
*/
if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
si->gpioid = SB_CC;
} else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
si->gpioidx = si->pciidx;
si->gpioid = SB_PCI;
} else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
si->gpioid = SB_EXTIF;
}
/* return to original core index */
sb_setcoreidx(sbh, origidx);
}
/* may be called with core in reset */
void
sb_detach(void *sbh)
{
sb_info_t *si;
uint idx;
si = SB_INFO(sbh);
if (si == NULL)
return;
if (si->bus == SB_BUS)
for (idx = 0; idx < SB_MAXCORES; idx++)
if (si->regs[idx]) {
REG_UNMAP(si->regs[idx]);
si->regs[idx] = NULL;
}
MFREE(si, sizeof (sb_info_t));
}
/* use pci dev id to determine chip id for chips not having a chipcommon core */
static uint
sb_pcidev2chip(uint pcidev)
{
if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
return (BCM4710_DEVICE_ID);
if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
return (BCM4610_DEVICE_ID);
if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
return (BCM4402_DEVICE_ID);
if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
return (BCM4307_DEVICE_ID);
if (pcidev == BCM4301_DEVICE_ID)
return (BCM4301_DEVICE_ID);
return (0);
}
/* convert chip number to number of i/o cores */
static uint
sb_chip2numcores(uint chip)
{
if (chip == 0x4710)
return (9);
if (chip == 0x4610)
return (9);
if (chip == 0x4402)
return (3);
if ((chip == 0x4307) || (chip == 0x4301))
return (5);
if (chip == 0x4310)
return (8);
if (chip == 0x4306) /* < 4306c0 */
return (6);
if (chip == 0x4704)
return (9);
if (chip == 0x5365)
return (7);
SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
ASSERT(0);
return (1);
}
/* return index of coreid or BADIDX if not found */
static uint
sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
{
sb_info_t *si;
uint found;
uint i;
si = SB_INFO(sbh);
found = 0;
for (i = 0; i < si->numcores; i++)
if (si->coreid[i] == coreid) {
if (found == coreunit)
return (i);
found++;
}
return (BADIDX);
}
/*
* this function changes logical "focus" to the indiciated core,
* must be called with interrupt off.
* Moreover, callers should keep interrupts off during switching out of and back to d11 core
*/
void*
sb_setcoreidx(void *sbh, uint coreidx)
{
sb_info_t *si;
uint32 sbaddr;
uint8 tmp;
si = SB_INFO(sbh);
if (coreidx >= si->numcores)
return (NULL);
/*
* If the user has provided an interrupt mask enabled function,
* then assert interrupts are disabled before switching the core.
*/
ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg));
sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
switch (si->bus) {
case SB_BUS:
/* map new one */
if (!si->regs[coreidx]) {
si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
ASSERT(GOODREGS(si->regs[coreidx]));
}
si->curmap = si->regs[coreidx];
break;
case PCI_BUS:
/* point bar0 window */
OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
break;
case PCMCIA_BUS:
tmp = (sbaddr >> 12) & 0x0f;
OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
tmp = (sbaddr >> 16) & 0xff;
OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
tmp = (sbaddr >> 24) & 0xff;
OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
break;
}
si->curidx = coreidx;
return (si->curmap);
}
/*
* this function changes logical "focus" to the indiciated core,
* must be called with interrupt off.
* Moreover, callers should keep interrupts off during switching out of and back to d11 core
*/
void*
sb_setcore(void *sbh, uint coreid, uint coreunit)
{
sb_info_t *si;
uint idx;
si = SB_INFO(sbh);
idx = sb_findcoreidx(sbh, coreid, coreunit);
if (!GOODIDX(idx))
return (NULL);
return (sb_setcoreidx(sbh, idx));
}
/* return chip number */
uint
sb_chip(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->chip);
}
/* return chip revision number */
uint
sb_chiprev(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->chiprev);
}
/* return chip common revision number */
uint
sb_chipcrev(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->ccrev);
}
/* return chip package option */
uint
sb_chippkg(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->chippkg);
}
/* return PCI core rev. */
uint
sb_pcirev(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->pcirev);
}
/* return PCMCIA core rev. */
uint
sb_pcmciarev(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->pcmciarev);
}
/* return board vendor id */
uint
sb_boardvendor(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->boardvendor);
}
/* return boardtype */
uint
sb_boardtype(void *sbh)
{
sb_info_t *si;
char *var;
si = SB_INFO(sbh);
if (si->bus == SB_BUS && si->boardtype == 0xffff) {
/* boardtype format is a hex string */
si->boardtype = getintvar(NULL, "boardtype");
/* backward compatibility for older boardtype string format */
if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
if (!strcmp(var, "bcm94710dev"))
si->boardtype = BCM94710D_BOARD;
else if (!strcmp(var, "bcm94710ap"))
si->boardtype = BCM94710AP_BOARD;
else if (!strcmp(var, "bcm94310u"))
si->boardtype = BCM94310U_BOARD;
else if (!strcmp(var, "bu4711"))
si->boardtype = BU4711_BOARD;
else if (!strcmp(var, "bu4710"))
si->boardtype = BU4710_BOARD;
else if (!strcmp(var, "bcm94702mn"))
si->boardtype = BCM94702MN_BOARD;
else if (!strcmp(var, "bcm94710r1"))
si->boardtype = BCM94710R1_BOARD;
else if (!strcmp(var, "bcm94710r4"))
si->boardtype = BCM94710R4_BOARD;
else if (!strcmp(var, "bcm94702cpci"))
si->boardtype = BCM94702CPCI_BOARD;
else if (!strcmp(var, "bcm95380_rr"))
si->boardtype = BCM95380RR_BOARD;
}
}
return (si->boardtype);
}
/* return board bus style */
uint
sb_boardstyle(void *sbh)
{
sb_info_t *si;
uint16 w;
si = SB_INFO(sbh);
if (si->bus == PCMCIA_BUS)
return (BOARDSTYLE_PCMCIA);
if (si->bus == SB_BUS)
return (BOARDSTYLE_SOC);
/* bus is PCI */
if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
return (BOARDSTYLE_CARDBUS);
if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
(w == 0x0313))
return (BOARDSTYLE_CARDBUS);
return (BOARDSTYLE_PCI);
}
/* return boolean if sbh device is in pci hostmode or client mode */
uint
sb_bus(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (si->bus);
}
/* return list of found cores */
uint
sb_corelist(void *sbh, uint coreid[])
{
sb_info_t *si;
si = SB_INFO(sbh);
bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
return (si->numcores);
}
/* return current register mapping */
void *
sb_coreregs(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
ASSERT(GOODREGS(si->curmap));
return (si->curmap);
}
/* traverse all cores to find and clear source of serror */
static void
sb_serr_clear(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
uint origidx;
uint i, intr_val = 0;
void * corereg = NULL;
si = SB_INFO(sbh);
INTR_OFF(si, intr_val);
origidx = sb_coreidx(sbh);
for (i = 0; i < si->numcores; i++) {
corereg = sb_setcoreidx(sbh, i);
if (NULL != corereg) {
sb = REGS2SB(corereg);
if ((si->chip == BCM4317_DEVICE_ID) && (si->chiprev == 0)) {
W_SBREG(sbh, &sb->sbtmstatehigh, 0);
} else {
if ((R_SBREG(sbh, &sb->sbtmstatehigh)) & SBTMH_SERR) {
AND_SBREG(sbh, &sb->sbtmstatehigh, ~SBTMH_SERR);
SB_ERROR(("sb_serr_clear: SError at core 0x%x\n", sb_coreid(sbh)));
}
}
}
}
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
}
/* check if any inband, outband or timeout errors has happened and clear them */
/* !! must be called with chip clk on */
bool
sb_taclear(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
uint origidx;
uint intr_val = 0;
bool rc = FALSE;
uint32 inband = 0, serror = 0, timeout = 0;
void *corereg = NULL;
volatile uint32 imstate, tmstate;
si = SB_INFO(sbh);
if (si->bus == PCI_BUS) {
volatile uint32 stcmd;
/* inband error is Target abort for PCI */
stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32));
inband = stcmd & PCI_CFG_CMD_STAT_TA;
if (inband)
OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32), stcmd);
/* serror */
stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32));
serror = stcmd & PCI_SBIM_STATUS_SERR;
if (serror) {
sb_serr_clear(sbh);
OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32), stcmd);
}
/* timeout */
imstate = sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), 0, 0);
if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), ~0,
(imstate & ~(SBIM_IBE | SBIM_TO)));
/* inband = imstate & SBIM_IBE; same as TA above */
timeout = imstate & SBIM_TO;
}
} else if (si->bus == PCMCIA_BUS) {
INTR_OFF(si, intr_val);
origidx = sb_coreidx(sbh);
corereg = sb_setcore(sbh, SB_PCMCIA, 0);
if (NULL != corereg) {
sb = REGS2SB(corereg);
imstate = R_SBREG(sbh, &sb->sbimstate);
/* handle surprise removal */
if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
inband = imstate & SBIM_IBE;
timeout = imstate & SBIM_TO;
}
tmstate = R_SBREG(sbh, &sb->sbtmstatehigh);
if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) {
if (!inband) {
serror = 1;
sb_serr_clear(sbh);
}
OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK);
AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK);
}
}
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
} else if (si->bus == SDIO_BUS) {
INTR_OFF(si, intr_val);
origidx = sb_coreidx(sbh);
corereg = sb_setcore(sbh, SB_PCMCIA, 0);
if (NULL != corereg) {
sb = REGS2SB(corereg);
imstate = R_SBREG(sbh, &sb->sbimstate);
if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
/* inband = imstate & SBIM_IBE; cmd error */
timeout = imstate & SBIM_TO;
}
tmstate = R_SBREG(sbh, &sb->sbtmstatehigh);
if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) {
sb_serr_clear(sbh);
serror = 1;
OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK);
AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK);
}
}
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
}
if ((inband | timeout | serror) != 0) {
rc = TRUE;
SB_ERROR(("sb_taclear: inband 0x%x, serror 0x%x, timeout 0x%x!\n", inband, serror, timeout));
}
return (rc);
}
/* do buffered registers update */
void
sb_commit(void *sbh)
{
sb_info_t *si;
sbpciregs_t *pciregs;
uint origidx;
uint intr_val = 0;
si = SB_INFO(sbh);
origidx = si->curidx;
ASSERT(GOODIDX(origidx));
INTR_OFF(si, intr_val);
/* switch over to pci core */
pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
/* do the buffer registers update */
W_REG(&pciregs->bcastaddr, SB_COMMIT);
W_REG(&pciregs->bcastdata, 0x0);
/* restore core index */
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
}
/* reset and re-enable a core */
void
sb_core_reset(void *sbh, uint32 bits)
{
sb_info_t *si;
sbconfig_t *sb;
volatile uint32 dummy;
si = SB_INFO(sbh);
ASSERT(GOODREGS(si->curmap));
sb = REGS2SB(si->curmap);
/*
* Must do the disable sequence first to work for arbitrary current core state.
*/
sb_core_disable(sbh, bits);
/*
* Now do the initialization sequence.
*/
/* set reset while enabling the clock and forcing them on throughout the core */
W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
dummy = R_SBREG(sbh, &sb->sbtmstatelow);
if (sb_coreid(sbh) == SB_ILINE100) {
bcm_mdelay(50);
} else {
OSL_DELAY(1);
}
if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
W_SBREG(sbh, &sb->sbtmstatehigh, 0);
}
if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
}
/* clear reset and allow it to propagate throughout the core */
W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
dummy = R_SBREG(sbh, &sb->sbtmstatelow);
OSL_DELAY(1);
/* leave clock enabled */
W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
dummy = R_SBREG(sbh, &sb->sbtmstatelow);
OSL_DELAY(1);
}
void
sb_core_tofixup(void *sbh)
{
sb_info_t *si;
sbconfig_t *sb;
si = SB_INFO(sbh);
if (si->pcirev >= 5)
return;
ASSERT(GOODREGS(si->curmap));
sb = REGS2SB(si->curmap);
if (si->bus == SB_BUS) {
SET_SBREG(sbh, &sb->sbimconfiglow,
SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
(0x5 << SBIMCL_RTO_SHIFT) | 0x3);
} else {
if (sb_coreid(sbh) == SB_PCI) {
SET_SBREG(sbh, &sb->sbimconfiglow,
SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
} else {
SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
}
}
sb_commit(sbh);
}
void
sb_core_disable(void *sbh, uint32 bits)
{
sb_info_t *si;
volatile uint32 dummy;
sbconfig_t *sb;
si = SB_INFO(sbh);
ASSERT(GOODREGS(si->curmap));
sb = REGS2SB(si->curmap);
/* must return if core is already in reset */
if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
return;
/* put into reset and return if clocks are not enabled */
if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
goto disable;
/* set the reject bit */
W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
/* spin until reject is set */
while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
OSL_DELAY(1);
/* spin until sbtmstatehigh.busy is clear */
while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
OSL_DELAY(1);
/* set reset and reject while enabling the clocks */
W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
dummy = R_SBREG(sbh, &sb->sbtmstatelow);
OSL_DELAY(10);
disable:
/* leave reset and reject asserted */
W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
OSL_DELAY(1);
}
void
sb_watchdog(void *sbh, uint ticks)
{
sb_info_t *si = SB_INFO(sbh);
/* instant NMI */
switch (si->gpioid) {
case SB_CC:
sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
break;
case SB_EXTIF:
sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
break;
}
}
/* initialize the pcmcia core */
void
sb_pcmcia_init(void *sbh)
{
sb_info_t *si;
uint8 cor;
si = SB_INFO(sbh);
/* enable d11 mac interrupts */
if (si->chip == BCM4301_DEVICE_ID) {
/* Have to use FCR2 in 4301 */
OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
cor |= COR_IRQEN | COR_FUNEN;
OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
} else {
OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
cor |= COR_IRQEN | COR_FUNEN;
OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
}
}
/*
* Configure the pci core for pci client (NIC) action
* and get appropriate dma offset value.
* coremask is the bitvec of cores by index to be enabled.
*/
void
sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
{
sb_info_t *si;
sbconfig_t *sb;
sbpciregs_t *pciregs;
uint32 sbflag;
uint32 w;
uint idx;
si = SB_INFO(sbh);
if (dmaoffset)
*dmaoffset = 0;
/* if not pci bus, we're done */
if (si->bus != PCI_BUS)
return;
ASSERT(si->pciidx);
/* get current core index */
idx = si->curidx;
/* we interrupt on this backplane flag number */
ASSERT(GOODREGS(si->curmap));
sb = REGS2SB(si->curmap);
sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
/* switch over to pci core */
pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
sb = REGS2SB(pciregs);
/*
* Enable sb->pci interrupts. Assume
* PCI rev 2.3 support was added in pci core rev 6 and things changed..
*/
if (si->pcirev < 6) {
/* set sbintvec bit for our flag number */
OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
} else {
/* pci config write to set this core bit in PCIIntMask */
w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
w |= (coremask << PCI_SBIM_SHIFT);
OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
}
/* enable prefetch and bursts for sonics-to-pci translation 2 */
OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
if (si->pcirev < 5) {
SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
sb_commit(sbh);
}
/* switch back to previous core */
sb_setcoreidx(sbh, idx);
/* use large sb pci dma window */
if (dmaoffset)
*dmaoffset = SB_PCI_DMA;
}
uint32
sb_base(uint32 admatch)
{
uint32 base;
uint type;
type = admatch & SBAM_TYPE_MASK;
ASSERT(type < 3);
base = 0;
if (type == 0) {
base = admatch & SBAM_BASE0_MASK;
} else if (type == 1) {
ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
base = admatch & SBAM_BASE1_MASK;
} else if (type == 2) {
ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
base = admatch & SBAM_BASE2_MASK;
}
return (base);
}
uint32
sb_size(uint32 admatch)
{
uint32 size;
uint type;
type = admatch & SBAM_TYPE_MASK;
ASSERT(type < 3);
size = 0;
if (type == 0) {
size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
} else if (type == 1) {
ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
} else if (type == 2) {
ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
}
return (size);
}
/* return the core-type instantiation # of the current core */
uint
sb_coreunit(void *sbh)
{
sb_info_t *si;
uint idx;
uint coreid;
uint coreunit;
uint i;
si = SB_INFO(sbh);
coreunit = 0;
idx = si->curidx;
ASSERT(GOODREGS(si->curmap));
coreid = sb_coreid(sbh);
/* count the cores of our type */
for (i = 0; i < idx; i++)
if (si->coreid[i] == coreid)
coreunit++;
return (coreunit);
}
static INLINE uint32
factor6(uint32 x)
{
switch (x) {
case CC_F6_2: return 2;
case CC_F6_3: return 3;
case CC_F6_4: return 4;
case CC_F6_5: return 5;
case CC_F6_6: return 6;
case CC_F6_7: return 7;
default: return 0;
}
}
/* calculate the speed the SB would run at given a set of clockcontrol values */
uint32
sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
{
uint32 n1, n2, clock, m1, m2, m3, mc;
n1 = n & CN_N1_MASK;
n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
n1 = factor6(n1);
n2 += CC_F5_BIAS;
} else if (pll_type == PLL_TYPE2) {
n1 += CC_T2_BIAS;
n2 += CC_T2_BIAS;
ASSERT((n1 >= 2) && (n1 <= 7));
ASSERT((n2 >= 5) && (n2 <= 23));
} else if (pll_type == PLL_TYPE3) {
return (100000000);
} else
ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
clock = CC_CLOCK_BASE * n1 * n2;
if (clock == 0)
return 0;
m1 = m & CC_M1_MASK;
m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
m1 = factor6(m1);
if (pll_type == PLL_TYPE1)
m2 += CC_F5_BIAS;
else
m2 = factor6(m2);
m3 = factor6(m3);
switch (mc) {
case CC_MC_BYPASS: return (clock);
case CC_MC_M1: return (clock / m1);
case CC_MC_M1M2: return (clock / (m1 * m2));
case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3));
case CC_MC_M1M3: return (clock / (m1 * m3));
default: return (0);
}
} else {
ASSERT(pll_type == PLL_TYPE2);
m1 += CC_T2_BIAS;
m2 += CC_T2M2_BIAS;
m3 += CC_T2_BIAS;
ASSERT((m1 >= 2) && (m1 <= 7));
ASSERT((m2 >= 3) && (m2 <= 10));
ASSERT((m3 >= 2) && (m3 <= 7));
if ((mc & CC_T2MC_M1BYP) == 0)
clock /= m1;
if ((mc & CC_T2MC_M2BYP) == 0)
clock /= m2;
if ((mc & CC_T2MC_M3BYP) == 0)
clock /= m3;
return(clock);
}
}
/* returns the current speed the SB is running at */
uint32
sb_clock(void *sbh)
{
sb_info_t *si;
extifregs_t *eir;
chipcregs_t *cc;
uint32 n, m;
uint idx;
uint32 pll_type, rate;
uint intr_val = 0;
si = SB_INFO(sbh);
idx = si->curidx;
pll_type = PLL_TYPE1;
INTR_OFF(si, intr_val);
/* switch to extif or chipc core */
if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
n = R_REG(&eir->clockcontrol_n);
m = R_REG(&eir->clockcontrol_sb);
} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
n = R_REG(&cc->clockcontrol_n);
m = R_REG(&cc->clockcontrol_sb);
} else {
INTR_RESTORE(si, intr_val);
return 0;
}
/* calculate rate */
rate = sb_clock_rate(pll_type, n, m);
/* switch back to previous core */
sb_setcoreidx(sbh, idx);
INTR_RESTORE(si, intr_val);
return rate;
}
/* change logical "focus" to the gpio core for optimized access */
void*
sb_gpiosetcore(void *sbh)
{
sb_info_t *si;
si = SB_INFO(sbh);
return (sb_setcoreidx(sbh, si->gpioidx));
}
/* mask&set gpiocontrol bits */
uint32
sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpiocontrol);
break;
case SB_PCI:
regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
break;
case SB_EXTIF:
return (0);
}
return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
}
/* mask&set gpio output enable bits */
uint32
sb_gpioouten(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpioouten);
break;
case SB_PCI:
regoff = OFFSETOF(sbpciregs_t, gpioouten);
break;
case SB_EXTIF:
regoff = OFFSETOF(extifregs_t, gpio[0].outen);
break;
}
return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
}
/* mask&set gpio output bits */
uint32
sb_gpioout(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpioout);
break;
case SB_PCI:
regoff = OFFSETOF(sbpciregs_t, gpioout);
break;
case SB_EXTIF:
regoff = OFFSETOF(extifregs_t, gpio[0].out);
break;
}
return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
}
/* return the current gpioin register value */
uint32
sb_gpioin(void *sbh)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpioin);
break;
case SB_PCI:
regoff = OFFSETOF(sbpciregs_t, gpioin);
break;
case SB_EXTIF:
regoff = OFFSETOF(extifregs_t, gpioin);
break;
}
return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
}
/* mask&set gpio interrupt polarity bits */
uint32
sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
break;
case SB_PCI:
/* pci gpio implementation does not support interrupt polarity */
ASSERT(0);
break;
case SB_EXTIF:
regoff = OFFSETOF(extifregs_t, gpiointpolarity);
break;
}
return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
}
/* mask&set gpio interrupt mask bits */
uint32
sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
{
sb_info_t *si;
uint regoff;
si = SB_INFO(sbh);
regoff = 0;
switch (si->gpioid) {
case SB_CC:
regoff = OFFSETOF(chipcregs_t, gpiointmask);
break;
case SB_PCI:
/* pci gpio implementation does not support interrupt mask */
ASSERT(0);
break;
case SB_EXTIF:
regoff = OFFSETOF(extifregs_t, gpiointmask);
break;
}
return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
}
/*
* Return the slow clock source.
* Three sources of SLOW CLOCK: LPO, Xtal, PCI
*/
static uint
sb_slowclk_src(void *sbh)
{
sb_info_t *si;
chipcregs_t *cc;
uint32 v;
si = SB_INFO(sbh);
ASSERT(sb_coreid(sbh) == SB_CC);
if (si->ccrev < 6) {
switch (si->bus) {
case PCMCIA_BUS: return (SCC_SS_XTAL);
case PCI_BUS:
v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
if (v & PCI_CFG_GPIO_SCS)
return (SCC_SS_PCI);
else
return (SCC_SS_XTAL);
default: return (SCC_SS_XTAL);
}
} else if (si->ccrev < 10) {
cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
return (v);
} else {
return (SCC_SS_XTAL);
}
}
/*
* Return the slowclock min or max frequency.
* Three sources of SLOW CLOCK:
* 1. On Chip LPO - 32khz or 160khz
* 2. On Chip Xtal OSC - 20mhz/4*(divider+1)
* 3. External PCI clock - 66mhz/4*(divider+1)
*/
static uint
sb_slowclk_freq(void *sbh, bool max)
{
sb_info_t *si;
chipcregs_t *cc;
uint32 slowclk;
uint div;
si = SB_INFO(sbh);
ASSERT(sb_coreid(sbh) == SB_CC);
cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
/* shouldn't be here unless we've established the chip has dynamic power control */
ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
slowclk = sb_slowclk_src(sbh);
if (si->ccrev < 6) {
if (slowclk == SCC_SS_PCI)
return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
else
return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
} else if (si->ccrev < 10) {
div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
if (slowclk == SCC_SS_LPO)
return (max? LPOMAXFREQ : LPOMINFREQ);
else if (slowclk == SCC_SS_XTAL)
return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
else if (slowclk == SCC_SS_PCI)
return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
else
ASSERT(0);
} else {
/* Chipc rev 10 is InstaClock */
div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHF;
div = 4 * (div + 1);
return (max ? XTALMAXFREQ : (XTALMINFREQ/div));
}
return (0);
}
static void
sb_pwrctl_setdelay(void *sbh, void *chipcregs)
{
chipcregs_t * cc;
uint slowmaxfreq, pll_delay, slowclk;
uint pll_on_delay, fref_sel_delay;
pll_delay = PLL_DELAY;
/* If the slow clock is not sourced by the xtal then add the xtal_on_delay
* since the xtal will also be powered down by dynamic power control logic.
*/
slowclk = sb_slowclk_src(sbh);
if (slowclk != SCC_SS_XTAL)
pll_delay += XTAL_ON_DELAY;
slowmaxfreq = sb_slowclk_freq(sbh, TRUE);
pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
cc = (chipcregs_t *)chipcregs;
W_REG(&cc->pll_on_delay, pll_on_delay);
W_REG(&cc->fref_sel_delay, fref_sel_delay);
}
/* set or get slow clock divider */
int
sb_pwrctl_slowclk(void *sbh, bool set, uint *div)
{
sb_info_t *si;
uint origidx;
chipcregs_t *cc;
uint intr_val = 0;
uint err = 0;
si = SB_INFO(sbh);
/* chipcommon cores prior to rev6 don't support slowclkcontrol */
if (si->ccrev < 6)
return 1;
/* chipcommon cores rev10 are a whole new ball game */
if (si->ccrev >= 10)
return 1;
if (set && ((*div % 4) || (*div < 4)))
return 2;
INTR_OFF(si, intr_val);
origidx = si->curidx;
cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
ASSERT(cc != NULL);
if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) {
err = 3;
goto done;
}
if (set) {
SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHF));
sb_pwrctl_setdelay(sbh, (void *)cc);
} else
*div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
done:
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
return err;
}
/* initialize power control delay registers */
void
sb_pwrctl_init(void *sbh)
{
sb_info_t *si;
uint origidx;
chipcregs_t *cc;
si = SB_INFO(sbh);
if (si->bus == SB_BUS)
return;
origidx = si->curidx;
if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
return;
if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
goto done;
/* 4317pc does not work with SlowClock less than 5Mhz */
if (si->bus == PCMCIA_BUS) {
if ((si->ccrev >= 6) && (si->ccrev < 10))
SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (SCC_DEF_DIV << SCC_CD_SHF));
}
sb_pwrctl_setdelay(sbh, (void *)cc);
done:
sb_setcoreidx(sbh, origidx);
}
/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
uint16
sb_pwrctl_fast_pwrup_delay(void *sbh)
{
sb_info_t *si;
uint origidx;
chipcregs_t *cc;
uint slowminfreq;
uint16 fpdelay;
uint intr_val = 0;
si = SB_INFO(sbh);
fpdelay = 0;
origidx = si->curidx;
if (si->bus == SB_BUS)
goto done;
INTR_OFF(si, intr_val);
if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
goto done;
if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
goto done;
slowminfreq = sb_slowclk_freq(sbh, FALSE);
fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
done:
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
return (fpdelay);
}
/* turn primary xtal and/or pll off/on */
int
sb_pwrctl_xtal(void *sbh, uint what, bool on)
{
sb_info_t *si;
uint32 in, out, outen;
si = SB_INFO(sbh);
switch (si->bus) {
case PCMCIA_BUS:
return (0);
case PCI_BUS:
in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
/*
* We can't actually read the state of the PLLPD so we infer it
* by the value of XTAL_PU which *is* readable via gpioin.
*/
if (on && (in & PCI_CFG_GPIO_XTAL))
return (0);
if (what & XTAL)
outen |= PCI_CFG_GPIO_XTAL;
if (what & PLL)
outen |= PCI_CFG_GPIO_PLL;
if (on) {
/* turn primary xtal on */
if (what & XTAL) {
out |= PCI_CFG_GPIO_XTAL;
if (what & PLL)
out |= PCI_CFG_GPIO_PLL;
OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
OSL_DELAY(XTAL_ON_DELAY);
}
/* turn pll on */
if (what & PLL) {
out &= ~PCI_CFG_GPIO_PLL;
OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
OSL_DELAY(2000);
}
} else {
if (what & XTAL)
out &= ~PCI_CFG_GPIO_XTAL;
if (what & PLL)
out |= PCI_CFG_GPIO_PLL;
OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
}
default:
return (-1);
}
return (0);
}
/* set dynamic power control mode (forceslow, forcefast, dynamic) */
/* returns true if ignore pll off is set and false if it is not */
bool
sb_pwrctl_clk(void *sbh, uint mode)
{
sb_info_t *si;
uint origidx;
chipcregs_t *cc;
uint32 scc;
bool forcefastclk=FALSE;
uint intr_val = 0;
si = SB_INFO(sbh);
/* chipcommon cores prior to rev6 don't support slowclkcontrol */
if (si->ccrev < 6)
return (FALSE);
/* chipcommon cores rev10 are a whole new ball game */
if (si->ccrev >= 10)
return (FALSE);
INTR_OFF(si, intr_val);
origidx = si->curidx;
cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
ASSERT(cc != NULL);
if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
goto done;
switch (mode) {
case CLK_FAST: /* force fast (pll) clock */
/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
sb_pwrctl_xtal(sbh, XTAL, ON);
SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
break;
case CLK_SLOW: /* force slow clock */
if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
return (-1);
if (si->ccrev >= 6)
OR_REG(&cc->slow_clk_ctl, SCC_FS);
break;
case CLK_DYNAMIC: /* enable dynamic power control */
scc = R_REG(&cc->slow_clk_ctl);
scc &= ~(SCC_FS | SCC_IP | SCC_XC);
if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
scc |= SCC_XC;
W_REG(&cc->slow_clk_ctl, scc);
/* for dynamic control, we have to release our xtal_pu "force on" */
if (scc & SCC_XC)
sb_pwrctl_xtal(sbh, XTAL, OFF);
break;
}
/* Is the h/w forcing the use of the fast clk */
forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
done:
sb_setcoreidx(sbh, origidx);
INTR_RESTORE(si, intr_val);
return (forcefastclk);
}
/* register driver interrupt disabling and restoring callback functions */
void
sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg)
{
sb_info_t *si;
si = SB_INFO(sbh);
si->intr_arg = intr_arg;
si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn;
/* save current core id. when this function called, the current core
* must be the core which provides driver functions(il, et, wl, etc.)
*/
si->dev_coreid = si->coreid[si->curidx];
}