qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 17:14:03 +02:00
Code
48ed30fc1b
openwrt-xburst/target/linux/generic/patches-2.6.34/975-ssb_update.patch
florian 23b5e584a9 [kernel] refresh 2.6.34 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-01 12:41:09 +00:00

1229 lines
46 KiB
Diff
Raw Blame History

--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -135,7 +135,6 @@ static void b44_init_rings(struct b44 *)
static void b44_init_hw(struct b44 *, int);
-static int dma_desc_align_mask;
static int dma_desc_sync_size;
static int instance;
@@ -150,9 +149,8 @@ static inline void b44_sync_dma_desc_for
unsigned long offset,
enum dma_data_direction dir)
{
- ssb_dma_sync_single_range_for_device(sdev, dma_base,
- offset & dma_desc_align_mask,
- dma_desc_sync_size, dir);
+ dma_sync_single_for_device(sdev->dma_dev, dma_base + offset,
+ dma_desc_sync_size, dir);
}
static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev,
@@ -160,9 +158,8 @@ static inline void b44_sync_dma_desc_for
unsigned long offset,
enum dma_data_direction dir)
{
- ssb_dma_sync_single_range_for_cpu(sdev, dma_base,
- offset & dma_desc_align_mask,
- dma_desc_sync_size, dir);
+ dma_sync_single_for_cpu(sdev->dma_dev, dma_base + offset,
+ dma_desc_sync_size, dir);
}
static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
@@ -608,10 +605,10 @@ static void b44_tx(struct b44 *bp)
BUG_ON(skb == NULL);
- ssb_dma_unmap_single(bp->sdev,
- rp->mapping,
- skb->len,
- DMA_TO_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev,
+ rp->mapping,
+ skb->len,
+ DMA_TO_DEVICE);
rp->skb = NULL;
dev_kfree_skb_irq(skb);
}
@@ -648,29 +645,29 @@ static int b44_alloc_rx_skb(struct b44 *
if (skb == NULL)
return -ENOMEM;
- mapping = ssb_dma_map_single(bp->sdev, skb->data,
- RX_PKT_BUF_SZ,
- DMA_FROM_DEVICE);
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
+ RX_PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
/* Hardware bug work-around, the chip is unable to do PCI DMA
to/from anything above 1GB :-( */
- if (ssb_dma_mapping_error(bp->sdev, mapping) ||
+ if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
/* Sigh... */
- if (!ssb_dma_mapping_error(bp->sdev, mapping))
- ssb_dma_unmap_single(bp->sdev, mapping,
+ if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
+ dma_unmap_single(bp->sdev->dma_dev, mapping,
RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
if (skb == NULL)
return -ENOMEM;
- mapping = ssb_dma_map_single(bp->sdev, skb->data,
- RX_PKT_BUF_SZ,
- DMA_FROM_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
- if (!ssb_dma_mapping_error(bp->sdev, mapping))
- ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
+ RX_PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(bp->sdev->dma_dev, mapping) ||
+ mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
+ if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
+ dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
return -ENOMEM;
}
@@ -745,9 +742,9 @@ static void b44_recycle_rx(struct b44 *b
dest_idx * sizeof(*dest_desc),
DMA_BIDIRECTIONAL);
- ssb_dma_sync_single_for_device(bp->sdev, dest_map->mapping,
- RX_PKT_BUF_SZ,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_device(bp->sdev->dma_dev, dest_map->mapping,
+ RX_PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
}
static int b44_rx(struct b44 *bp, int budget)
@@ -767,9 +764,9 @@ static int b44_rx(struct b44 *bp, int bu
struct rx_header *rh;
u16 len;
- ssb_dma_sync_single_for_cpu(bp->sdev, map,
- RX_PKT_BUF_SZ,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(bp->sdev->dma_dev, map,
+ RX_PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
rh = (struct rx_header *) skb->data;
len = le16_to_cpu(rh->len);
if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
@@ -801,8 +798,8 @@ static int b44_rx(struct b44 *bp, int bu
skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
if (skb_size < 0)
goto drop_it;
- ssb_dma_unmap_single(bp->sdev, map,
- skb_size, DMA_FROM_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev, map,
+ skb_size, DMA_FROM_DEVICE);
/* Leave out rx_header */
skb_put(skb, len + RX_PKT_OFFSET);
skb_pull(skb, RX_PKT_OFFSET);
@@ -954,24 +951,24 @@ static netdev_tx_t b44_start_xmit(struct
goto err_out;
}
- mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
struct sk_buff *bounce_skb;
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
- if (!ssb_dma_mapping_error(bp->sdev, mapping))
- ssb_dma_unmap_single(bp->sdev, mapping, len,
+ if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
+ dma_unmap_single(bp->sdev->dma_dev, mapping, len,
DMA_TO_DEVICE);
bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb)
goto err_out;
- mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data,
- len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
- if (!ssb_dma_mapping_error(bp->sdev, mapping))
- ssb_dma_unmap_single(bp->sdev, mapping,
+ mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data,
+ len, DMA_TO_DEVICE);
+ if (dma_mapping_error(bp->sdev->dma_dev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
+ if (!dma_mapping_error(bp->sdev->dma_dev, mapping))
+ dma_unmap_single(bp->sdev->dma_dev, mapping,
len, DMA_TO_DEVICE);
dev_kfree_skb_any(bounce_skb);
goto err_out;
@@ -1014,8 +1011,6 @@ static netdev_tx_t b44_start_xmit(struct
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- dev->trans_start = jiffies;
-
out_unlock:
spin_unlock_irqrestore(&bp->lock, flags);
@@ -1070,8 +1065,8 @@ static void b44_free_rings(struct b44 *b
if (rp->skb == NULL)
continue;
- ssb_dma_unmap_single(bp->sdev, rp->mapping, RX_PKT_BUF_SZ,
- DMA_FROM_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ,
+ DMA_FROM_DEVICE);
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
}
@@ -1082,8 +1077,8 @@ static void b44_free_rings(struct b44 *b
if (rp->skb == NULL)
continue;
- ssb_dma_unmap_single(bp->sdev, rp->mapping, rp->skb->len,
- DMA_TO_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
}
@@ -1105,14 +1100,12 @@ static void b44_init_rings(struct b44 *b
memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
if (bp->flags & B44_FLAG_RX_RING_HACK)
- ssb_dma_sync_single_for_device(bp->sdev, bp->rx_ring_dma,
- DMA_TABLE_BYTES,
- DMA_BIDIRECTIONAL);
+ dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma,
+ DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
if (bp->flags & B44_FLAG_TX_RING_HACK)
- ssb_dma_sync_single_for_device(bp->sdev, bp->tx_ring_dma,
- DMA_TABLE_BYTES,
- DMA_TO_DEVICE);
+ dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma,
+ DMA_TABLE_BYTES, DMA_TO_DEVICE);
for (i = 0; i < bp->rx_pending; i++) {
if (b44_alloc_rx_skb(bp, -1, i) < 0)
@@ -1132,27 +1125,23 @@ static void b44_free_consistent(struct b
bp->tx_buffers = NULL;
if (bp->rx_ring) {
if (bp->flags & B44_FLAG_RX_RING_HACK) {
- ssb_dma_unmap_single(bp->sdev, bp->rx_ring_dma,
- DMA_TABLE_BYTES,
- DMA_BIDIRECTIONAL);
+ dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma,
+ DMA_TABLE_BYTES, DMA_BIDIRECTIONAL);
kfree(bp->rx_ring);
} else
- ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
- bp->rx_ring, bp->rx_ring_dma,
- GFP_KERNEL);
+ dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
+ bp->rx_ring, bp->rx_ring_dma);
bp->rx_ring = NULL;
bp->flags &= ~B44_FLAG_RX_RING_HACK;
}
if (bp->tx_ring) {
if (bp->flags & B44_FLAG_TX_RING_HACK) {
- ssb_dma_unmap_single(bp->sdev, bp->tx_ring_dma,
- DMA_TABLE_BYTES,
- DMA_TO_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma,
+ DMA_TABLE_BYTES, DMA_TO_DEVICE);
kfree(bp->tx_ring);
} else
- ssb_dma_free_consistent(bp->sdev, DMA_TABLE_BYTES,
- bp->tx_ring, bp->tx_ring_dma,
- GFP_KERNEL);
+ dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
+ bp->tx_ring, bp->tx_ring_dma);
bp->tx_ring = NULL;
bp->flags &= ~B44_FLAG_TX_RING_HACK;
}
@@ -1177,7 +1166,8 @@ static int b44_alloc_consistent(struct b
goto out_err;
size = DMA_TABLE_BYTES;
- bp->rx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->rx_ring_dma, gfp);
+ bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
+ &bp->rx_ring_dma, gfp);
if (!bp->rx_ring) {
/* Allocation may have failed due to pci_alloc_consistent
insisting on use of GFP_DMA, which is more restrictive
@@ -1189,11 +1179,11 @@ static int b44_alloc_consistent(struct b
if (!rx_ring)
goto out_err;
- rx_ring_dma = ssb_dma_map_single(bp->sdev, rx_ring,
- DMA_TABLE_BYTES,
- DMA_BIDIRECTIONAL);
+ rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring,
+ DMA_TABLE_BYTES,
+ DMA_BIDIRECTIONAL);
- if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) ||
+ if (dma_mapping_error(bp->sdev->dma_dev, rx_ring_dma) ||
rx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(rx_ring);
goto out_err;
@@ -1204,7 +1194,8 @@ static int b44_alloc_consistent(struct b
bp->flags |= B44_FLAG_RX_RING_HACK;
}
- bp->tx_ring = ssb_dma_alloc_consistent(bp->sdev, size, &bp->tx_ring_dma, gfp);
+ bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size,
+ &bp->tx_ring_dma, gfp);
if (!bp->tx_ring) {
/* Allocation may have failed due to ssb_dma_alloc_consistent
insisting on use of GFP_DMA, which is more restrictive
@@ -1216,11 +1207,11 @@ static int b44_alloc_consistent(struct b
if (!tx_ring)
goto out_err;
- tx_ring_dma = ssb_dma_map_single(bp->sdev, tx_ring,
- DMA_TABLE_BYTES,
- DMA_TO_DEVICE);
+ tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring,
+ DMA_TABLE_BYTES,
+ DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) ||
+ if (dma_mapping_error(bp->sdev->dma_dev, tx_ring_dma) ||
tx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(tx_ring);
goto out_err;
@@ -2178,12 +2169,14 @@ static int __devinit b44_init_one(struct
"Failed to powerup the bus\n");
goto err_out_free_dev;
}
- err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
- if (err) {
+
+ if (dma_set_mask(sdev->dma_dev, DMA_BIT_MASK(30)) ||
+ dma_set_coherent_mask(sdev->dma_dev, DMA_BIT_MASK(30))) {
dev_err(sdev->dev,
"Required 30BIT DMA mask unsupported by the system\n");
goto err_out_powerdown;
}
+
err = b44_get_invariants(bp);
if (err) {
dev_err(sdev->dev,
@@ -2346,7 +2339,6 @@ static int __init b44_init(void)
int err;
/* Setup paramaters for syncing RX/TX DMA descriptors */
- dma_desc_align_mask = ~(dma_desc_align_size - 1);
dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
err = b44_pci_init();
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
+static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ case 0x4322:
+ case 0x4328:
+ return 7000;
+ case 0x4325:
+ /* TODO: */
+ default:
+ return 15000;
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
if (bus->bustype != SSB_BUSTYPE_PCI)
return;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
+ return;
+ }
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
{
if (!cc->dev)
return; /* We don't have a ChipCommon */
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
{
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
}
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -502,9 +502,9 @@ static void ssb_pmu_resources_init(struc
chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
}
+/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
void ssb_pmu_init(struct ssb_chipcommon *cc)
{
- struct ssb_bus *bus = cc->dev->bus;
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
- if (cc->pmu.rev >= 1) {
- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
- ~SSB_CHIPCO_PMU_CTL_NOILPONW);
- } else {
- chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
- SSB_CHIPCO_PMU_CTL_NOILPONW);
- }
- }
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+ else
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -486,11 +486,12 @@ static int ssb_devices_register(struct s
#ifdef CONFIG_SSB_PCIHOST
sdev->irq = bus->host_pci->irq;
dev->parent = &bus->host_pci->dev;
+ sdev->dma_dev = dev->parent;
#endif
break;
case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
- sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
+ sdev->irq = bus->host_pcmcia->irq;
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
break;
case SSB_BUSTYPE_SSB:
dev->dma_mask = &dev->coherent_dma_mask;
+ sdev->dma_dev = dev;
break;
}
@@ -834,6 +836,9 @@ int ssb_bus_pcibus_register(struct ssb_b
if (!err) {
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
"PCI device %s\n", dev_name(&host_pci->dev));
+ } else {
+ ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+ " of SSB with error %d\n", err);
}
return err;
@@ -1223,80 +1228,6 @@ u32 ssb_dma_translation(struct ssb_devic
}
EXPORT_SYMBOL(ssb_dma_translation);
-int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
-{
-#ifdef CONFIG_SSB_PCIHOST
- int err;
-#endif
-
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- err = pci_set_dma_mask(dev->bus->host_pci, mask);
- if (err)
- return err;
- err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
- return err;
-#endif
- case SSB_BUSTYPE_SSB:
- return dma_set_mask(dev->dev, mask);
- default:
- __ssb_dma_not_implemented(dev);
- }
- return -ENOSYS;
-}
-EXPORT_SYMBOL(ssb_dma_set_mask);
-
-void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t gfp_flags)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- if (gfp_flags & GFP_DMA) {
- /* Workaround: The PCI API does not support passing
- * a GFP flag. */
- return dma_alloc_coherent(&dev->bus->host_pci->dev,
- size, dma_handle, gfp_flags);
- }
- return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
-#endif
- case SSB_BUSTYPE_SSB:
- return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
- default:
- __ssb_dma_not_implemented(dev);
- }
- return NULL;
-}
-EXPORT_SYMBOL(ssb_dma_alloc_consistent);
-
-void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle,
- gfp_t gfp_flags)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- if (gfp_flags & GFP_DMA) {
- /* Workaround: The PCI API does not support passing
- * a GFP flag. */
- dma_free_coherent(&dev->bus->host_pci->dev,
- size, vaddr, dma_handle);
- return;
- }
- pci_free_consistent(dev->bus->host_pci, size,
- vaddr, dma_handle);
- return;
-#endif
- case SSB_BUSTYPE_SSB:
- dma_free_coherent(dev->dev, size, vaddr, dma_handle);
- return;
- default:
- __ssb_dma_not_implemented(dev);
- }
-}
-EXPORT_SYMBOL(ssb_dma_free_consistent);
-
int ssb_bus_may_powerdown(struct ssb_bus *bus)
{
struct ssb_chipcommon *cc;
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -168,7 +168,7 @@ err_pci:
}
/* Get the word-offset for a SSB_SPROM_XXX define. */
-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
+#define SPOFF(offset) ((offset) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
int i;
for (i = 0; i < bus->sprom_size; i++)
- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
return 0;
}
@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
ssb_printk("75%%");
else if (i % 2)
ssb_printk(".");
- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
mmiowb();
msleep(20);
}
@@ -621,6 +621,28 @@ static int ssb_pci_sprom_get(struct ssb_
int err = -ENOMEM;
u16 *buf;
+ if (!ssb_is_sprom_available(bus)) {
+ ssb_printk(KERN_ERR PFX "No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailible! */
+ /*
+ * get SPROM offset: SSB_SPROM_BASE1 except for
+ * chipcommon rev >= 31 or chip ID is 0x4312 and
+ * chipcommon status & 3 == 2
+ */
+ if (bus->chipco.dev->id.revision >= 31)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else if (bus->chip_id == 0x4312 &&
+ (bus->chipco.status & 0x03) == 2)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
goto out;
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -176,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
{
return fallback_sprom;
}
+
+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
+bool ssb_is_sprom_available(struct ssb_bus *bus)
+{
+ /* status register only exists on chipcomon rev >= 11 and we need check
+ for >= 31 only */
+ /* this routine differs from specs as we do not access SPROM directly
+ on PCMCIA */
+ if (bus->bustype == SSB_BUSTYPE_PCI &&
+ bus->chipco.dev && /* can be unavailible! */
+ bus->chipco.dev->id.revision >= 31)
+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
+
+ return true;
+}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -167,7 +167,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
- struct device *dev;
+ struct device *dev, *dma_dev;
struct ssb_bus *bus;
struct ssb_device_id id;
@@ -305,6 +305,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
u16 chip_rev;
+ u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
extern void ssb_bus_unregister(struct ssb_bus *bus);
+/* Does the device have an SPROM? */
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
+
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
@@ -466,14 +470,6 @@ extern u32 ssb_dma_translation(struct ss
#define SSB_DMA_TRANSLATION_MASK 0xC0000000
#define SSB_DMA_TRANSLATION_SHIFT 30
-extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask);
-
-extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t gfp_flags);
-extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle,
- gfp_t gfp_flags);
-
static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
{
#ifdef CONFIG_SSB_DEBUG
@@ -482,155 +478,6 @@ static inline void __cold __ssb_dma_not_
#endif /* DEBUG */
}
-static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- return pci_dma_mapping_error(dev->bus->host_pci, addr);
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- return dma_mapping_error(dev->dev, addr);
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
- return -ENOSYS;
-}
-
-static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p,
- size_t size, enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- return pci_map_single(dev->bus->host_pci, p, size, dir);
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- return dma_map_single(dev->dev, p, size, dir);
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
- return 0;
-}
-
-static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
- return;
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- dma_unmap_single(dev->dev, dma_addr, size, dir);
- return;
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
-}
-
-static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
- dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
- size, dir);
- return;
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
- return;
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
-}
-
-static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
- dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
- size, dir);
- return;
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
- return;
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
-}
-
-static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
- dma_addr_t dma_addr,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- /* Just sync everything. That's all the PCI API can do. */
- pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
- offset + size, dir);
- return;
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
- size, dir);
- return;
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
-}
-
-static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
- dma_addr_t dma_addr,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
-{
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
- /* Just sync everything. That's all the PCI API can do. */
- pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
- offset + size, dir);
- return;
-#endif
- break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
- size, dir);
- return;
- default:
- break;
- }
- __ssb_dma_not_implemented(dev);
-}
-
-
#ifdef CONFIG_SSB_PCIHOST
/* PCI-host wrapper driver */
extern int ssb_pcihost_register(struct pci_driver *driver);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -53,6 +53,7 @@
#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
#define SSB_CHIPCO_CORECTL 0x0008
#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
@@ -385,6 +386,7 @@
/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
@@ -398,6 +400,18 @@
#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
+/** Macros to determine SPROM presence based on Chip-Status register. */
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_OTP_SEL)
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_OTP_SEL))
+
/** Clockcontrol masks and values **/
@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
struct ssb_chipcommon {
struct ssb_device *dev;
u32 capabilities;
+ u32 status;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct ssb_chipcommon_pmu pmu;
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -170,26 +170,27 @@
#define SSB_SPROMSIZE_WORDS_R4 220
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE 0x1000
-#define SSB_SPROM_REVISION 0x107E
+#define SSB_SPROM_BASE1 0x1000
+#define SSB_SPROM_BASE31 0x0800
+#define SSB_SPROM_REVISION 0x007E
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
#define SSB_SPROM_REVISION_CRC_SHIFT 8
/* SPROM Revision 1 */
-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM1_BINF 0x105C /* Board info */
+#define SSB_SPROM1_BINF 0x005C /* Board info */
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
@@ -197,63 +198,63 @@
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
-#define SSB_SPROM1_PA0B0 0x105E
-#define SSB_SPROM1_PA0B1 0x1060
-#define SSB_SPROM1_PA0B2 0x1062
-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
+#define SSB_SPROM1_PA0B0 0x005E
+#define SSB_SPROM1_PA0B1 0x0060
+#define SSB_SPROM1_PA0B2 0x0062
+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
-#define SSB_SPROM1_PA1B0 0x106A
-#define SSB_SPROM1_PA1B1 0x106C
-#define SSB_SPROM1_PA1B2 0x106E
-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
+#define SSB_SPROM1_PA1B0 0x006A
+#define SSB_SPROM1_PA1B1 0x006C
+#define SSB_SPROM1_PA1B2 0x006E
+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_ITSSI_A_SHIFT 8
-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
/* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
#define SSB_SPROM2_OPO_VALUE 0x00FF
#define SSB_SPROM2_OPO_UNUSED 0xFF00
-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
/* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
@@ -264,100 +265,100 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM4_AGAIN1_SHIFT 8
-#define SSB_SPROM4_AGAIN23 0x1060
+#define SSB_SPROM4_AGAIN23 0x0060
#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM4_AGAIN2_SHIFT 0
#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM4_AGAIN3_SHIFT 8
-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM4_ITSSI_BG_SHIFT 8
-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM4_ITSSI_A_SHIFT 8
-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
-#define SSB_SPROM4_PA0B2 0x1086
-#define SSB_SPROM4_PA1B0 0x108E
-#define SSB_SPROM4_PA1B1 0x1090
-#define SSB_SPROM4_PA1B2 0x1092
+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
+#define SSB_SPROM4_PA0B2 0x0086
+#define SSB_SPROM4_PA1B0 0x008E
+#define SSB_SPROM4_PA1B1 0x0090
+#define SSB_SPROM4_PA1B2 0x0092
/* SPROM Revision 5 (inherits most data from rev 4) */
-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM5_GPIOA_P1_SHIFT 8
-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM8_GPIOA_P1_SHIFT 8
+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM8_GPIOB_P3_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM8_AGAIN0_SHIFT 0
#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM8_AGAIN1_SHIFT 8
-#define SSB_SPROM8_AGAIN23 0x10A0
+#define SSB_SPROM8_AGAIN23 0x00A0
#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM8_GPIOA_P1_SHIFT 8
-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
#define SSB_SPROM8_RSSISMC2G_SHIFT 4
@@ -365,7 +366,7 @@
#define SSB_SPROM8_RSSISAV2G_SHIFT 8
#define SSB_SPROM8_BXA2G 0x1800
#define SSB_SPROM8_BXA2G_SHIFT 11
-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
#define SSB_SPROM8_RSSISMF5G 0x000F
#define SSB_SPROM8_RSSISMC5G 0x00F0
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
@@ -373,47 +374,47 @@
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
#define SSB_SPROM8_BXA5G 0x1800
#define SSB_SPROM8_BXA5G_SHIFT 11
-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
#define SSB_SPROM8_TRI5G_SHIFT 8
-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
#define SSB_SPROM8_TRI5GH_SHIFT 8
-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
-#define SSB_SPROM8_PA0B1 0x10C4
-#define SSB_SPROM8_PA0B2 0x10C6
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1 0x00C4
+#define SSB_SPROM8_PA0B2 0x00C6
+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
#define SSB_SPROM8_MAXP_AL_SHIFT 8
-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
-#define SSB_SPROM8_PA1B1 0x10CE
-#define SSB_SPROM8_PA1B2 0x10D0
-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
-#define SSB_SPROM8_PA1LOB1 0x10D4
-#define SSB_SPROM8_PA1LOB2 0x10D6
-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
-#define SSB_SPROM8_PA1HIB1 0x10DA
-#define SSB_SPROM8_PA1HIB2 0x10DC
-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1 0x00CE
+#define SSB_SPROM8_PA1B2 0x00D0
+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1 0x00D4
+#define SSB_SPROM8_PA1LOB2 0x00D6
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
View Git Blame Copy Permalink