mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-13 02:42:29 +02:00
3f2561bdea
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
70 lines
1.7 KiB
Plaintext
70 lines
1.7 KiB
Plaintext
config interface loopback
|
|
option ifname lo
|
|
option proto static
|
|
option ipaddr 127.0.0.1
|
|
option netmask 255.0.0.0
|
|
|
|
config interface lan
|
|
option ifname eth0.1
|
|
option type bridge
|
|
option proto static
|
|
option ipaddr 192.168.1.1
|
|
option netmask 255.255.255.0
|
|
|
|
config interface wan
|
|
option ifname eth1
|
|
option proto dhcp
|
|
|
|
config switch
|
|
option name rtl8366s
|
|
option reset 1
|
|
option enable_vlan 1
|
|
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
|
option blinkrate 2
|
|
|
|
config switch_vlan
|
|
option device rtl8366s
|
|
option vlan 1
|
|
option ports "0 1 2 3 5t"
|
|
|
|
config switch_port
|
|
# Port 1 controls the GREEN configuration of LEDs for
|
|
# the switch and the section does not correspond to a real
|
|
# switch port.
|
|
#
|
|
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
|
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
|
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
|
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
|
# 14: Link (master); 15: separate register
|
|
|
|
option device rtl8366s
|
|
option port 1
|
|
option led 6
|
|
|
|
config switch_port
|
|
# Port 2 controls the ORANGE configuration of LEDs for
|
|
# the switch and the section does not correspond to a real
|
|
# switch port.
|
|
#
|
|
# See the key above for switch port 1 for the meaning of the
|
|
# 'led' setting below.
|
|
|
|
option device rtl8366s
|
|
option port 2
|
|
option led 9
|
|
|
|
config switch_port
|
|
# Port 5 controls the configuration of the WAN LED and the
|
|
# section does not correspond to a real switch port.
|
|
#
|
|
# To toggle the use of green or orange LEDs for the WAN port,
|
|
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
|
#
|
|
# See the key above for switch port 1 for the meaning of the
|
|
# 'led' setting below.
|
|
|
|
option device rtl8366s
|
|
option port 5
|
|
option led 2
|