mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 11:35:52 +03:00
- Includes large parts of the patch from #1021 by dpalffy - Includes RB532 NAND driver changes by n0-1 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5789 3c298f89-4303-0410-b956-a3cf2f4a3e73
169 lines
4.4 KiB
Diff
169 lines
4.4 KiB
Diff
diff -urN linux.old/drivers/mtd/nand/Kconfig linux.dev/drivers/mtd/nand/Kconfig
|
|
--- linux.old/drivers/mtd/nand/Kconfig 2006-11-29 22:57:37.000000000 +0100
|
|
+++ linux.dev/drivers/mtd/nand/Kconfig 2006-12-14 04:38:51.000000000 +0100
|
|
@@ -75,6 +75,12 @@
|
|
help
|
|
Support for NAND flash on Technologic Systems TS-7250 platform.
|
|
|
|
+config MTD_NAND_RB500
|
|
+ tristate "NAND Flash device on RB500 board"
|
|
+ depends on MTD_NAND
|
|
+ help
|
|
+ Support for NAND flash on RB500 platform.
|
|
+
|
|
config MTD_NAND_IDS
|
|
tristate
|
|
|
|
diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefile
|
|
--- linux.old/drivers/mtd/nand/Makefile 2006-11-29 22:57:37.000000000 +0100
|
|
+++ linux.dev/drivers/mtd/nand/Makefile 2006-12-14 04:38:51.000000000 +0100
|
|
@@ -9,6 +9,7 @@
|
|
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
|
|
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
|
|
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
|
|
+obj-$(CONFIG_MTD_NAND_RB500) += rbmipsnand.o
|
|
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
|
|
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
|
|
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
|
|
diff -urN linux.old/drivers/mtd/nand/rbmipsnand.c linux.dev/drivers/mtd/nand/rbmipsnand.c
|
|
--- linux.old/drivers/mtd/nand/rbmipsnand.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux.dev/drivers/mtd/nand/rbmipsnand.c 2006-12-14 04:39:52.000000000 +0100
|
|
@@ -0,0 +1,137 @@
|
|
+#include <linux/init.h>
|
|
+#include <linux/mtd/nand.h>
|
|
+#include <linux/mtd/mtd.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+#include <linux/delay.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/bootinfo.h>
|
|
+
|
|
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
|
|
+
|
|
+#define GPIOF 0x050000
|
|
+#define GPIOC 0x050004
|
|
+#define GPIOD 0x050008
|
|
+
|
|
+#define GPIO_RDY (1 << 0x08)
|
|
+#define GPIO_WPX (1 << 0x09)
|
|
+#define GPIO_ALE (1 << 0x0a)
|
|
+#define GPIO_CLE (1 << 0x0b)
|
|
+
|
|
+#define DEV2BASE 0x010020
|
|
+
|
|
+#define LO_WPX (1 << 0)
|
|
+#define LO_ALE (1 << 1)
|
|
+#define LO_CLE (1 << 2)
|
|
+#define LO_CEX (1 << 3)
|
|
+#define LO_FOFF (1 << 5)
|
|
+#define LO_SPICS (1 << 6)
|
|
+#define LO_ULED (1 << 7)
|
|
+
|
|
+#define MEM32(x) *((volatile unsigned *) (x))
|
|
+static void __iomem *p_nand;
|
|
+
|
|
+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
|
|
+
|
|
+static int rb500_dev_ready(struct mtd_info *mtd)
|
|
+{
|
|
+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * hardware specific access to control-lines
|
|
+ *
|
|
+ * ctrl:
|
|
+ * NAND_CLE: bit 2 -> bit 3
|
|
+ * NAND_ALE: bit 3 -> bit 2
|
|
+ */
|
|
+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
|
|
+ unsigned int ctrl)
|
|
+{
|
|
+ struct nand_chip *chip = mtd->priv;
|
|
+ unsigned char orbits, nandbits;
|
|
+
|
|
+ if (ctrl & NAND_CTRL_CHANGE) {
|
|
+
|
|
+ orbits = (ctrl & NAND_CLE) << 1;
|
|
+ orbits |= (ctrl & NAND_ALE) >> 1;
|
|
+
|
|
+ nandbits = (~ctrl & NAND_CLE) << 1;
|
|
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
|
|
+
|
|
+ changeLatchU5(orbits, nandbits);
|
|
+ }
|
|
+ if (cmd != NAND_CMD_NONE)
|
|
+ writeb(cmd, chip->IO_ADDR_W);
|
|
+
|
|
+}
|
|
+
|
|
+static struct mtd_partition partition_info[] = {
|
|
+ {
|
|
+ name:"RouterBoard NAND Boot",
|
|
+ offset:0,
|
|
+ size:4 * 1024 * 1024},
|
|
+ {
|
|
+ name:"RouterBoard NAND Main",
|
|
+ offset:MTDPART_OFS_NXTBLK,
|
|
+ size:MTDPART_SIZ_FULL}
|
|
+};
|
|
+
|
|
+static struct mtd_info rmtd;
|
|
+static struct nand_chip rnand;
|
|
+
|
|
+static unsigned init_ok = 0;
|
|
+
|
|
+unsigned get_rbnand_block_size(void)
|
|
+{
|
|
+ if (init_ok)
|
|
+ return rmtd.writesize;
|
|
+ else
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(get_rbnand_block_size);
|
|
+
|
|
+int __init rbmips_init(void)
|
|
+{
|
|
+ int *b;
|
|
+ memset(&rmtd, 0, sizeof(rmtd));
|
|
+ memset(&rnand, 0, sizeof(rnand));
|
|
+
|
|
+ printk("RB500 nand\n");
|
|
+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
|
|
+ LO_ULED | LO_ALE | LO_CLE);
|
|
+ rnand.cmd_ctrl = rbmips_hwcontrol500;
|
|
+
|
|
+ rnand.dev_ready = rb500_dev_ready;
|
|
+ rnand.IO_ADDR_W = (unsigned char *)
|
|
+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
|
|
+ rnand.IO_ADDR_R = rnand.IO_ADDR_W;
|
|
+
|
|
+ p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
|
|
+ if (!p_nand) {
|
|
+ printk("RBnand Unable ioremap buffer");
|
|
+ return -ENXIO;
|
|
+ }
|
|
+ rnand.ecc.mode = NAND_ECC_SOFT;
|
|
+ rnand.chip_delay = 25;
|
|
+ rnand.options |= NAND_NO_AUTOINCR;
|
|
+ rmtd.priv = &rnand;
|
|
+
|
|
+ b = (int *) KSEG1ADDR(0x18010020);
|
|
+ printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
|
|
+ b[1], b[2], b[3]);
|
|
+
|
|
+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
|
|
+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
|
|
+ printk("RBxxx nand device not found");
|
|
+ iounmap((void *) p_nand);
|
|
+ return -ENXIO;
|
|
+ }
|
|
+
|
|
+ add_mtd_partitions(&rmtd, partition_info, 2);
|
|
+ init_ok = 1;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+module_init(rbmips_init);
|