mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-27 07:32:59 +02:00
70a23a1138
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26268 3c298f89-4303-0410-b956-a3cf2f4a3e73
341 lines
8.6 KiB
Diff
341 lines
8.6 KiB
Diff
--- a/arch/arm/mach-ixp4xx/Kconfig
|
|
+++ b/arch/arm/mach-ixp4xx/Kconfig
|
|
@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
|
|
Engineering Sidewinder board. For more information on this
|
|
platform, see http://www.adiengineering.com
|
|
|
|
+config MACH_USR8200
|
|
+ bool "USRobotics USR8200"
|
|
+ select PCI
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support the USRobotics
|
|
+ USR8200 router board. For more information on this platform, see
|
|
+ http://openwrt.org
|
|
+
|
|
config MACH_COMPEX
|
|
bool "Compex WP18 / NP18A"
|
|
select PCI
|
|
--- a/arch/arm/mach-ixp4xx/Makefile
|
|
+++ b/arch/arm/mach-ixp4xx/Makefile
|
|
@@ -26,6 +26,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
|
|
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
|
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
|
|
obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
|
|
+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
|
|
|
|
obj-y += common.o
|
|
|
|
@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
|
|
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
|
obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
|
|
obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
|
|
+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
|
|
|
|
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
|
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
|
|
@@ -0,0 +1,78 @@
|
|
+/*
|
|
+ * arch/arch/mach-ixp4xx/usr8200-pci.c
|
|
+ *
|
|
+ * PCI setup routines for USRobotics USR8200
|
|
+ *
|
|
+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
|
|
+ *
|
|
+ * based on pronghorn-pci.c
|
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * based on coyote-pci.c:
|
|
+ * Copyright (C) 2002 Jungo Software Technologies.
|
|
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
|
|
+ *
|
|
+ * Maintainer: Peter Denison <openwrt@marshadder.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+#include <mach/hardware.h>
|
|
+
|
|
+#include <asm/mach/pci.h>
|
|
+
|
|
+void __init usr8200_pci_preinit(void)
|
|
+{
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
|
|
+
|
|
+ ixp4xx_pci_preinit();
|
|
+}
|
|
+
|
|
+static int __init usr8200_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
+{
|
|
+ if (slot == 14)
|
|
+ return IRQ_IXP4XX_GPIO7;
|
|
+ else if (slot == 15)
|
|
+ return IRQ_IXP4XX_GPIO8;
|
|
+ else if (slot == 16) {
|
|
+ if (pin == 1)
|
|
+ return IRQ_IXP4XX_GPIO11;
|
|
+ else if (pin == 2)
|
|
+ return IRQ_IXP4XX_GPIO10;
|
|
+ else if (pin == 3)
|
|
+ return IRQ_IXP4XX_GPIO9;
|
|
+ else
|
|
+ return -1;
|
|
+ } else
|
|
+ return -1;
|
|
+}
|
|
+
|
|
+struct hw_pci usr8200_pci __initdata = {
|
|
+ .nr_controllers = 1,
|
|
+ .preinit = usr8200_pci_preinit,
|
|
+ .swizzle = pci_std_swizzle,
|
|
+ .setup = ixp4xx_setup,
|
|
+ .scan = ixp4xx_scan_bus,
|
|
+ .map_irq = usr8200_map_irq,
|
|
+};
|
|
+
|
|
+int __init usr8200_pci_init(void)
|
|
+{
|
|
+ if (machine_is_usr8200())
|
|
+ pci_common_init(&usr8200_pci);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+subsys_initcall(usr8200_pci_init);
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
|
|
@@ -0,0 +1,210 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/usr8200-setup.c
|
|
+ *
|
|
+ * Board setup for the USRobotics USR8200
|
|
+ *
|
|
+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
|
|
+ *
|
|
+ * based on pronghorn-setup.c:
|
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * based on coyote-setup.c:
|
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Author: Peter Denison <openwrt@marshadder.org>
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/memory.h>
|
|
+#include <linux/i2c-gpio.h>
|
|
+#include <linux/leds.h>
|
|
+
|
|
+#include <asm/setup.h>
|
|
+#include <mach/hardware.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+static struct flash_platform_data usr8200_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource usr8200_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device usr8200_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &usr8200_flash_data,
|
|
+ },
|
|
+ .num_resources = 1,
|
|
+ .resource = &usr8200_flash_resource,
|
|
+};
|
|
+
|
|
+static struct resource usr8200_uart_resources [] = {
|
|
+ {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ },
|
|
+ {
|
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct plat_serial8250_port usr8200_uart_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART1,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device usr8200_uart = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev = {
|
|
+ .platform_data = usr8200_uart_data,
|
|
+ },
|
|
+ .num_resources = 2,
|
|
+ .resource = usr8200_uart_resources,
|
|
+};
|
|
+
|
|
+static struct gpio_led usr8200_led_pin[] = {
|
|
+ {
|
|
+ .name = "usr8200:usb1",
|
|
+ .gpio = 0,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "usr8200:usb2",
|
|
+ .gpio = 1,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "usr8200:ieee1394",
|
|
+ .gpio = 2,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "usr8200:internal",
|
|
+ .gpio = 3,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "usr8200:power",
|
|
+ .gpio = 14,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_led_platform_data usr8200_led_data = {
|
|
+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
|
|
+ .leds = usr8200_led_pin,
|
|
+};
|
|
+
|
|
+static struct platform_device usr8200_led = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = -1,
|
|
+ .dev.platform_data = &usr8200_led_data,
|
|
+};
|
|
+
|
|
+static struct eth_plat_info usr8200_plat_eth[] = {
|
|
+ { /* NPEC - LAN with Marvell 88E6060 switch */
|
|
+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
|
|
+ .phy_mask = 0x0F0000,
|
|
+ .rxq = 4,
|
|
+ .txreadyq = 21,
|
|
+ }, { /* NPEB - WAN */
|
|
+ .phy = 9,
|
|
+ .rxq = 3,
|
|
+ .txreadyq = 20,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device usr8200_eth[] = {
|
|
+ {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEC,
|
|
+ .dev.platform_data = usr8200_plat_eth,
|
|
+ }, {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEB,
|
|
+ .dev.platform_data = usr8200_plat_eth + 1,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct resource usr8200_rtc_resources = {
|
|
+ .flags = IORESOURCE_MEM
|
|
+};
|
|
+
|
|
+static struct platform_device usr8200_rtc = {
|
|
+ .name = "rtc7301",
|
|
+ .id = 0,
|
|
+ .num_resources = 1,
|
|
+ .resource = &usr8200_rtc_resources,
|
|
+};
|
|
+
|
|
+static struct platform_device *usr8200_devices[] __initdata = {
|
|
+ &usr8200_flash,
|
|
+ &usr8200_uart,
|
|
+ &usr8200_led,
|
|
+ &usr8200_eth[0],
|
|
+ &usr8200_eth[1],
|
|
+ &usr8200_rtc,
|
|
+};
|
|
+
|
|
+static void __init usr8200_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
|
|
+
|
|
+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
|
|
+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
|
|
+
|
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
|
+ *IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
|
|
+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
|
|
+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
|
|
+
|
|
+ /* configure button as input */
|
|
+ gpio_line_config(12, IXP4XX_GPIO_IN);
|
|
+
|
|
+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
|
|
+}
|
|
+
|
|
+MACHINE_START(USR8200, "USRobotics USR8200")
|
|
+ /* Maintainer: Peter Denison <openwrt@marshadder.org> */
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .boot_params = 0x0100,
|
|
+ .init_machine = usr8200_init,
|
|
+MACHINE_END
|
|
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
|
|
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
|
|
@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
|
|
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
|
|
machine_is_gateway7001() || machine_is_wg302v2() ||
|
|
machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
|
|
- machine_is_tw5334())
|
|
+ machine_is_tw5334() || machine_is_usr8200())
|
|
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
|
|
else
|
|
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
|