1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-28 07:22:25 +02:00
openwrt-xburst/target/linux/generic-2.6/patches/050-mtdpart_redboot_byteswap_partition_truncate.patch
2006-10-27 12:32:10 +00:00

62 lines
2.2 KiB
Diff

--- linux-2.6.18/drivers/mtd/redboot.c.orig 2006-10-23 11:41:56.000000000 -0400
+++ linux-2.6.18/drivers/mtd/redboot.c 2006-10-23 11:42:09.000000000 -0400
@@ -92,22 +92,47 @@
* swab32(erasesize) then we know we are looking at
* a byte swapped FIS directory - swap all the entries!
* (NOTE: this is 'size' not 'data_length'; size is
- * the full size of the entry.)
+ * the full size of the entry.)
+ *
+ * Handle cases where the FIS directory is less than
+ * a full erase block (like combine FIS directory
+ * and RedBoot config).
+ *
+ * IMHO the best solution would be to compute the
+ * flash address of the RedBoot FIS directory and
+ * compare that with the entry in the FIS directory
+ * entry swabbed. However, I haven't yet figured out
+ * how to compute that.
*/
- if (swab32(buf[i].size) == master->erasesize) {
+
+ unsigned long erasesize_mask = master->erasesize -1;
+ unsigned long eraseaddr_mask = 0xFFFFFFFF ^ erasesize_mask;
+
+ if (((swab32(buf[i].size)+erasesize_mask)
+ & eraseaddr_mask) == master->erasesize) {
int j;
- for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+
+ /* N.B. The full table being processed so adjust size now */
+ numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
+ for (j = 0; j < numslots; ++j) {
/* The unsigned long fields were written with the
* wrong byte sex, name and pad have no byte sex.
- */
- swab32s(&buf[j].flash_base);
- swab32s(&buf[j].mem_base);
- swab32s(&buf[j].size);
- swab32s(&buf[j].entry_point);
- swab32s(&buf[j].data_length);
- swab32s(&buf[j].desc_cksum);
- swab32s(&buf[j].file_cksum);
+ *
+ * Only process non-deleted entries. Don't exit early.
+ */
+ if (buf[j].name[0] != 0xff) {
+ swab32s(&buf[j].flash_base);
+ swab32s(&buf[j].mem_base);
+ swab32s(&buf[j].size);
+ swab32s(&buf[j].entry_point);
+ swab32s(&buf[j].data_length);
+ swab32s(&buf[j].desc_cksum);
+ swab32s(&buf[j].file_cksum);
+ }
}
+ } else {
+ /* Update numslots based on actual FIS directory size */
+ numslots = buf[i].size / sizeof (struct fis_image_desc);
}
break;
}