qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-09 23:02:28 +02:00
Code
4fdf829b30
openwrt-xburst/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch
hauke 90fac27f2a [brcm47xx] refresh patches and configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 20:19:55 +00:00

824 lines
30 KiB
Diff
Raw Blame History

Sent to mainline on 2009 Feb 03.
For further modifications, please use separate patch files. This simpifies
keeping track of what is upstream and what is not. Thanks.
--mb
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.
# built-in drivers
ssb-y += driver_chipcommon.o
+ssb-y += driver_chipcommon_pmu.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -0,0 +1,508 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/delay.h>
+
+#include "ssb_private.h"
+
+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
+{
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
+}
+
+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
+ u32 offset, u32 value)
+{
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+}
+
+struct pmu0_plltab_entry {
+ u16 freq; /* Crystal frequency in kHz.*/
+ u8 xf; /* Crystal frequency value for PMU control */
+ u8 wb_int;
+ u32 wb_frac;
+};
+
+static const struct pmu0_plltab_entry pmu0_plltab[] = {
+ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, },
+ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, },
+ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, },
+ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, },
+ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, },
+ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, },
+ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, },
+ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, },
+ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, },
+ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
+ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
+ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
+ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
+ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, },
+};
+#define SSB_PMU0_DEFAULT_XTALFREQ 20000
+
+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
+{
+ const struct pmu0_plltab_entry *e;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
+ e = &pmu0_plltab[i];
+ if (e->freq == crystalfreq)
+ return e;
+ }
+
+ return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
+ u32 crystalfreq)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ const struct pmu0_plltab_entry *e = NULL;
+ u32 pmuctl, tmp, pllctl;
+ unsigned int i;
+
+ if ((bus->chip_id == 0x5354) && !crystalfreq) {
+ /* The 5354 crystal freq is 25MHz */
+ crystalfreq = 25000;
+ }
+ if (crystalfreq)
+ e = pmu0_plltab_find_entry(crystalfreq);
+ if (!e)
+ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
+ BUG_ON(!e);
+ crystalfreq = e->freq;
+ cc->pmu.crystalfreq = e->freq;
+
+ /* Check if the PLL already is programmed to this frequency. */
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+ /* We're already there... */
+ return;
+ }
+
+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+ (crystalfreq / 1000), (crystalfreq % 1000));
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+ case 0x4328:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+ break;
+ case 0x5354:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ for (i = 1500; i; i--) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+ break;
+ udelay(10);
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
+ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
+ else
+ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
+
+ /* Set WILD in PLL control 1. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
+ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
+ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
+ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
+ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
+ if (e->wb_frac == 0)
+ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
+
+ /* Set WILD in PLL control 2. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
+ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
+
+ /* Set the crystalfrequency and the divisor. */
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
+ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+struct pmu1_plltab_entry {
+ u16 freq; /* Crystal frequency in kHz.*/
+ u8 xf; /* Crystal frequency value for PMU control */
+ u8 ndiv_int;
+ u32 ndiv_frac;
+ u8 p1div;
+ u8 p2div;
+};
+
+static const struct pmu1_plltab_entry pmu1_plltab[] = {
+ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, },
+ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, },
+ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, },
+ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, },
+ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, },
+ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, },
+ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, },
+ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, },
+ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, },
+ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, },
+ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, },
+ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
+ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, },
+ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, },
+ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, },
+};
+
+#define SSB_PMU1_DEFAULT_XTALFREQ 15360
+
+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
+{
+ const struct pmu1_plltab_entry *e;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
+ e = &pmu1_plltab[i];
+ if (e->freq == crystalfreq)
+ return e;
+ }
+
+ return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
+ u32 crystalfreq)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ const struct pmu1_plltab_entry *e = NULL;
+ u32 buffer_strength = 0;
+ u32 tmp, pllctl, pmuctl;
+ unsigned int i;
+
+ if (bus->chip_id == 0x4312) {
+ /* We do not touch the BCM4312 PLL and assume
+ * the default crystal settings work out-of-the-box. */
+ cc->pmu.crystalfreq = 20000;
+ return;
+ }
+
+ if (crystalfreq)
+ e = pmu1_plltab_find_entry(crystalfreq);
+ if (!e)
+ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
+ BUG_ON(!e);
+ crystalfreq = e->freq;
+ cc->pmu.crystalfreq = e->freq;
+
+ /* Check if the PLL already is programmed to this frequency. */
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+ /* We're already there... */
+ return;
+ }
+
+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+ (crystalfreq / 1000), (crystalfreq % 1000));
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+ case 0x4325:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+ (1 << SSB_PMURES_4325_HT_AVAIL)));
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+ (1 << SSB_PMURES_4325_HT_AVAIL)));
+ /* Adjust the BBPLL to 2 on all channels later. */
+ buffer_strength = 0x222222;
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ for (i = 1500; i; i--) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+ break;
+ udelay(10);
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
+ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
+ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
+
+ /* Set ndiv int and ndiv mode */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
+ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
+ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
+ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
+
+ /* Set ndiv frac */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
+ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
+ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
+
+ /* Change the drive strength, if required. */
+ if (buffer_strength) {
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
+ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
+ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
+ }
+
+ /* Tune the crystalfreq and the divisor. */
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
+ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+ /* TODO: The user may override the crystal frequency. */
+ }
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ case 0x4325:
+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
+ break;
+ case 0x4328:
+ case 0x5354:
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PLL init unknown for device %04X\n",
+ bus->chip_id);
+ }
+}
+
+struct pmu_res_updown_tab_entry {
+ u8 resource; /* The resource number */
+ u16 updown; /* The updown value */
+};
+
+enum pmu_res_depend_tab_task {
+ PMU_RES_DEP_SET = 1,
+ PMU_RES_DEP_ADD,
+ PMU_RES_DEP_REMOVE,
+};
+
+struct pmu_res_depend_tab_entry {
+ u8 resource; /* The resource number */
+ u8 task; /* SET | ADD | REMOVE */
+ u32 depend; /* The depend mask */
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
+ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, },
+ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, },
+ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, },
+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, },
+ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, },
+ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, },
+ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
+ {
+ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
+ .resource = SSB_PMURES_4328_ILP_REQUEST,
+ .task = PMU_RES_DEP_SET,
+ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
+ },
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
+ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
+ {
+ /* Adjust HT-Available dependencies. */
+ .resource = SSB_PMURES_4325_HT_AVAIL,
+ .task = PMU_RES_DEP_ADD,
+ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
+ (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
+ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
+ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
+ },
+};
+
+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 min_msk = 0, max_msk = 0;
+ unsigned int i;
+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
+ unsigned int updown_tab_size;
+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
+ unsigned int depend_tab_size;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ /* We keep the default settings:
+ * min_msk = 0xCBB
+ * max_msk = 0x7FFFF
+ */
+ break;
+ case 0x4325:
+ /* Power OTP down later. */
+ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
+ (1 << SSB_PMURES_4325_LNLDO2_PU);
+ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
+ SSB_CHIPCO_CHST_4325_PMUTOP_2B)
+ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
+ /* The PLL may turn on, if it decides so. */
+ max_msk = 0xFFFFF;
+ updown_tab = pmu_res_updown_tab_4325a0;
+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
+ depend_tab = pmu_res_depend_tab_4325a0;
+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
+ break;
+ case 0x4328:
+ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
+ (1 << SSB_PMURES_4328_XTAL_EN);
+ /* The PLL may turn on, if it decides so. */
+ max_msk = 0xFFFFF;
+ updown_tab = pmu_res_updown_tab_4328a0;
+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
+ depend_tab = pmu_res_depend_tab_4328a0;
+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
+ break;
+ case 0x5354:
+ /* The PLL may turn on, if it decides so. */
+ max_msk = 0xFFFFF;
+ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PMU resource config unknown for device %04X\n",
+ bus->chip_id);
+ }
+
+ if (updown_tab) {
+ for (i = 0; i < updown_tab_size; i++) {
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+ updown_tab[i].resource);
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
+ updown_tab[i].updown);
+ }
+ }
+ if (depend_tab) {
+ for (i = 0; i < depend_tab_size; i++) {
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+ depend_tab[i].resource);
+ switch (depend_tab[i].task) {
+ case PMU_RES_DEP_SET:
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+ depend_tab[i].depend);
+ break;
+ case PMU_RES_DEP_ADD:
+ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+ depend_tab[i].depend);
+ break;
+ case PMU_RES_DEP_REMOVE:
+ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+ ~(depend_tab[i].depend));
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ }
+ }
+
+ /* Set the resource masks. */
+ if (min_msk)
+ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
+ if (max_msk)
+ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+}
+
+void ssb_pmu_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 pmucap;
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+ return;
+
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev >= 1) {
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+ } else {
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
+ }
+ }
+ ssb_pmu_pll_init(cc);
+ ssb_pmu_resources_init(cc);
+}
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -26,19 +26,6 @@ enum ssb_clksrc {
};
-static inline u32 chipco_read32(struct ssb_chipcommon *cc,
- u16 offset)
-{
- return ssb_read32(cc->dev, offset);
-}
-
-static inline void chipco_write32(struct ssb_chipcommon *cc,
- u16 offset,
- u32 value)
-{
- ssb_write32(cc->dev, offset, value);
-}
-
static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
u32 mask, u32 value)
{
@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
{
if (!cc->dev)
return; /* We don't have a ChipCommon */
+ ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
calc_fast_powerup_delay(cc);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -181,6 +181,16 @@
#define SSB_CHIPCO_PROG_WAITCNT 0x0124
#define SSB_CHIPCO_FLASH_CFG 0x0128
#define SSB_CHIPCO_FLASH_WAITCNT 0x012C
+#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
+#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
+#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
+#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
+#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
#define SSB_CHIPCO_UART0_FCR 0x0308
@@ -197,6 +207,196 @@
#define SSB_CHIPCO_UART1_LSR 0x0414
#define SSB_CHIPCO_UART1_MSR 0x0418
#define SSB_CHIPCO_UART1_SCRATCH 0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
+#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
+#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
+#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2
+#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
+#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */
+#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */
+#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */
+#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA 0x0654
+#define SSB_CHIPCO_REGCTL_ADDR 0x0658
+#define SSB_CHIPCO_REGCTL_DATA 0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR 0x0660
+#define SSB_CHIPCO_PLLCTL_DATA 0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0 0
+#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001
+#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */
+#define SSB_PMU0_PLLCTL1 1
+#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */
+#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28
+#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */
+#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8
+#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2 2
+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */
+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0 0
+#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */
+#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20
+#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */
+#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24
+#define SSB_PMU1_PLLCTL1 1
+#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */
+#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0
+#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */
+#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8
+#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */
+#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16
+#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */
+#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24
+#define SSB_PMU1_PLLCTL2 2
+#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */
+#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0
+#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */
+#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8
+#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */
+#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17
+#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */
+#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20
+#define SSB_PMU1_PLLCTL3 3
+#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */
+#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0
+#define SSB_PMU1_PLLCTL4 4
+#define SSB_PMU1_PLLCTL5 5
+#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */
+#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST 0
+#define SSB_PMURES_4312_SWITCHER_PWM 1
+#define SSB_PMURES_4312_PA_REF_LDO 2
+#define SSB_PMURES_4312_CORE_LDO_BURST 3
+#define SSB_PMURES_4312_CORE_LDO_PWM 4
+#define SSB_PMURES_4312_RADIO_LDO 5
+#define SSB_PMURES_4312_ILP_REQUEST 6
+#define SSB_PMURES_4312_BG_FILTBYP 7
+#define SSB_PMURES_4312_TX_FILTBYP 8
+#define SSB_PMURES_4312_RX_FILTBYP 9
+#define SSB_PMURES_4312_XTAL_PU 10
+#define SSB_PMURES_4312_ALP_AVAIL 11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP 12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP 13
+#define SSB_PMURES_4312_HT_AVAIL 14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST 0
+#define SSB_PMURES_4325_CBUCK_BURST 1
+#define SSB_PMURES_4325_CBUCK_PWM 2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM 5
+#define SSB_PMURES_4325_ILP_REQUEST 6
+#define SSB_PMURES_4325_ABUCK_BURST 7
+#define SSB_PMURES_4325_ABUCK_PWM 8
+#define SSB_PMURES_4325_LNLDO1_PU 9
+#define SSB_PMURES_4325_LNLDO2_PU 10
+#define SSB_PMURES_4325_LNLDO3_PU 11
+#define SSB_PMURES_4325_LNLDO4_PU 12
+#define SSB_PMURES_4325_XTAL_PU 13
+#define SSB_PMURES_4325_ALP_AVAIL 14
+#define SSB_PMURES_4325_RX_PWRSW_PU 15
+#define SSB_PMURES_4325_TX_PWRSW_PU 16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18
+#define SSB_PMURES_4325_AFE_PWRSW_PU 19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20
+#define SSB_PMURES_4325_HT_AVAIL 21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM 1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST 2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3
+#define SSB_PMURES_4328_ILP_REQUEST 4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6
+#define SSB_PMURES_4328_ROM_SWITCH 7
+#define SSB_PMURES_4328_PA_REF_LDO 8
+#define SSB_PMURES_4328_RADIO_LDO 9
+#define SSB_PMURES_4328_AFE_LDO 10
+#define SSB_PMURES_4328_PLL_LDO 11
+#define SSB_PMURES_4328_BG_FILTBYP 12
+#define SSB_PMURES_4328_TX_FILTBYP 13
+#define SSB_PMURES_4328_RX_FILTBYP 14
+#define SSB_PMURES_4328_XTAL_PU 15
+#define SSB_PMURES_4328_XTAL_EN 16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP 17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP 18
+#define SSB_PMURES_4328_BB_PLL_PU 19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM 1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST 2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3
+#define SSB_PMURES_5354_ILP_REQUEST 4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6
+#define SSB_PMURES_5354_ROM_SWITCH 7
+#define SSB_PMURES_5354_PA_REF_LDO 8
+#define SSB_PMURES_5354_RADIO_LDO 9
+#define SSB_PMURES_5354_AFE_LDO 10
+#define SSB_PMURES_5354_PLL_LDO 11
+#define SSB_PMURES_5354_BG_FILTBYP 12
+#define SSB_PMURES_5354_TX_FILTBYP 13
+#define SSB_PMURES_5354_RX_FILTBYP 14
+#define SSB_PMURES_5354_XTAL_PU 15
+#define SSB_PMURES_5354_XTAL_EN 16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP 17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP 18
+#define SSB_PMURES_5354_BB_PLL_PU 19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
@@ -353,11 +553,20 @@
struct ssb_device;
struct ssb_serial_port;
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+ u8 rev; /* PMU revision */
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
+};
+
struct ssb_chipcommon {
struct ssb_device *dev;
u32 capabilities;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
+ struct ssb_chipcommon_pmu pmu;
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
return (cc->dev != NULL);
}
+/* Register access */
+#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
struct ssb_serial_port *ports);
#endif /* CONFIG_SSB_SERIAL */
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+
#endif /* LINUX_SSB_CHIPCO_H_ */
View Git Blame Copy Permalink