1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 05:31:53 +02:00
openwrt-xburst/target/linux/brcm-2.4/patches/004-flash.patch
florian 55877ca580 [brcm-2.4] update to 2.4.37, tested on wrt54gs (#4766)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28 15:55:54 +00:00

59 lines
2.1 KiB
Diff

--- a/drivers/mtd/devices/Config.in
+++ b/drivers/mtd/devices/Config.in
@@ -5,6 +5,7 @@
mainmenu_option next_comment
comment 'Self-contained MTD device drivers'
+bool ' Broadcom Chipcommon Serial Flash support' CONFIG_MTD_SFLASH
dep_tristate ' Ramix PMC551 PCI Mezzanine RAM card support' CONFIG_MTD_PMC551 $CONFIG_MTD $CONFIG_PCI
if [ "$CONFIG_MTD_PMC551" = "y" -o "$CONFIG_MTD_PMC551" = "m" ]; then
bool ' PMC551 256M DRAM Bugfix' CONFIG_MTD_PMC551_BUGFIX
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -3,6 +3,8 @@
#
# $Id: Makefile,v 1.4 2001/06/26 21:10:05 spse Exp $
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
+
O_TARGET := devlink.o
# *** BIG UGLY NOTE ***
@@ -12,6 +14,7 @@ O_TARGET := devlink.o
# here where previously there was none. We now have to ensure that
# doc200[01].o are linked before docprobe.o
+obj-$(CONFIG_MTD_SFLASH) += sflash.o
obj-$(CONFIG_MTD_DOC1000) += doc1000.o
obj-$(CONFIG_MTD_DOC2000) += doc2000.o
obj-$(CONFIG_MTD_DOC2001) += doc2001.o
--- a/drivers/mtd/maps/Config.in
+++ b/drivers/mtd/maps/Config.in
@@ -48,6 +48,7 @@ if [ "$CONFIG_PPC" = "y" ]; then
fi
if [ "$CONFIG_MIPS" = "y" ]; then
+ dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -3,6 +3,8 @@
#
# $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
+
BELOW25 := $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
ifeq ($(BELOW25),y)
@@ -10,6 +12,7 @@ O_TARGET := mapslink.o
endif
# Chip mappings
+obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o
obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o