mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 10:37:07 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7919 3c298f89-4303-0410-b956-a3cf2f4a3e73
430 lines
12 KiB
Diff
430 lines
12 KiB
Diff
Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
|
|
@@ -0,0 +1,71 @@
|
|
+/*
|
|
+ * arch/arch/mach-ixp4xx/fsg-pci.c
|
|
+ *
|
|
+ * FSG board-level PCI initialization
|
|
+ *
|
|
+ * Author: Rod Whitby <rod@whitby.id.au>
|
|
+ * Maintainer: http://www.nslu2-linux.org/
|
|
+ *
|
|
+ * based on ixdp425-pci.c:
|
|
+ * Copyright (C) 2002 Intel Corporation.
|
|
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+
|
|
+#include <asm/mach/pci.h>
|
|
+#include <asm/mach-types.h>
|
|
+
|
|
+void __init fsg_pci_preinit(void)
|
|
+{
|
|
+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
|
|
+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
|
|
+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
|
|
+
|
|
+ ixp4xx_pci_preinit();
|
|
+}
|
|
+
|
|
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
+{
|
|
+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
|
|
+ IRQ_FSG_PCI_INTC,
|
|
+ IRQ_FSG_PCI_INTB,
|
|
+ IRQ_FSG_PCI_INTA,
|
|
+ };
|
|
+
|
|
+ int irq = -1;
|
|
+ slot = slot - 11;
|
|
+
|
|
+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
|
|
+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
|
|
+ irq = pci_irq_table[(slot - 1)];
|
|
+ }
|
|
+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
|
|
+
|
|
+ return irq;
|
|
+}
|
|
+
|
|
+struct hw_pci fsg_pci __initdata = {
|
|
+ .nr_controllers = 1,
|
|
+ .preinit = fsg_pci_preinit,
|
|
+ .swizzle = pci_std_swizzle,
|
|
+ .setup = ixp4xx_setup,
|
|
+ .scan = ixp4xx_scan_bus,
|
|
+ .map_irq = fsg_map_irq,
|
|
+};
|
|
+
|
|
+int __init fsg_pci_init(void)
|
|
+{
|
|
+ if (machine_is_fsg())
|
|
+ pci_common_init(&fsg_pci);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+subsys_initcall(fsg_pci_init);
|
|
Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
|
|
@@ -0,0 +1,223 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/fsg-setup.c
|
|
+ *
|
|
+ * FSG board-setup
|
|
+ *
|
|
+ * based ixdp425-setup.c:
|
|
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Author: Rod Whitby <rod@whitby.id.au>
|
|
+ * Maintainers: http://www.nslu2-linux.org/
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/leds.h>
|
|
+#include <linux/mtd/mtd.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+static struct flash_platform_data fsg_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource fsg_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device fsg_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &fsg_flash_data,
|
|
+ .num_resources = 1,
|
|
+ .resource = &fsg_flash_resource,
|
|
+};
|
|
+
|
|
+static struct ixp4xx_i2c_pins fsg_i2c_gpio_pins = {
|
|
+ .sda_pin = FSG_SDA_PIN,
|
|
+ .scl_pin = FSG_SCL_PIN,
|
|
+};
|
|
+
|
|
+static struct platform_device fsg_i2c_controller = {
|
|
+ .name = "IXP4XX-I2C",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &fsg_i2c_gpio_pins,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static struct resource fsg_uart_resources[] = {
|
|
+ {
|
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct plat_serial8250_port fsg_uart_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART1,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { }
|
|
+};
|
|
+
|
|
+static struct platform_device fsg_uart = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev.platform_data = fsg_uart_data,
|
|
+ .num_resources = ARRAY_SIZE(fsg_uart_resources),
|
|
+ .resource = fsg_uart_resources,
|
|
+};
|
|
+
|
|
+/* Built-in 10/100 Ethernet MAC interfaces */
|
|
+static struct resource res_mac0 = {
|
|
+ .start = IXP4XX_EthB_BASE_PHYS,
|
|
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct resource res_mac1 = {
|
|
+ .start = IXP4XX_EthC_BASE_PHYS,
|
|
+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct mac_plat_info plat_mac0 = {
|
|
+ .npe_id = 1,
|
|
+ .phy_id = 5,
|
|
+ .eth_id = 0,
|
|
+ .rxq_id = 27,
|
|
+ .txq_id = 24,
|
|
+ .rxdoneq_id = 4,
|
|
+};
|
|
+
|
|
+static struct mac_plat_info plat_mac1 = {
|
|
+ .npe_id = 2,
|
|
+ .phy_id = 4,
|
|
+ .eth_id = 1,
|
|
+ .rxq_id = 28,
|
|
+ .txq_id = 25,
|
|
+ .rxdoneq_id = 5,
|
|
+};
|
|
+
|
|
+static struct platform_device mac0 = {
|
|
+ .name = "ixp4xx_mac",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &plat_mac0,
|
|
+ .num_resources = 1,
|
|
+ .resource = &res_mac0,
|
|
+};
|
|
+
|
|
+static struct platform_device mac1 = {
|
|
+ .name = "ixp4xx_mac",
|
|
+ .id = 1,
|
|
+ .dev.platform_data = &plat_mac1,
|
|
+ .num_resources = 1,
|
|
+ .resource = &res_mac1,
|
|
+};
|
|
+
|
|
+struct npe_ucode_platform_data fsg_npe_ucode_data = {
|
|
+ .mtd_partition = "microcode",
|
|
+};
|
|
+
|
|
+static struct platform_device fsg_npe_ucode = {
|
|
+ .name = "ixp4xx_npe_ucode",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &fsg_npe_ucode_data,
|
|
+};
|
|
+
|
|
+static struct platform_device *fsg_devices[] __initdata = {
|
|
+ &fsg_i2c_controller,
|
|
+ &fsg_flash,
|
|
+ &mac0,
|
|
+ &mac1,
|
|
+ &fsg_npe_ucode,
|
|
+};
|
|
+
|
|
+static void fsg_flash_add(struct mtd_info *mtd)
|
|
+{
|
|
+ if (strcmp(mtd->name, "RedBoot config") == 0) {
|
|
+ size_t retlen;
|
|
+ u_char mac[6];
|
|
+
|
|
+ if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) {
|
|
+ printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
|
|
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
+ memcpy(plat_mac0.hwaddr, mac, 6);
|
|
+ mac[5]++;
|
|
+ printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
|
|
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
+ memcpy(plat_mac1.hwaddr, mac, 6);
|
|
+ } else {
|
|
+ printk(KERN_ERR "fsg mac: read failed\n");
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+static void fsg_flash_remove(struct mtd_info *mtd) {
|
|
+}
|
|
+
|
|
+static struct mtd_notifier fsg_flash_notifier = {
|
|
+ .add = fsg_flash_add,
|
|
+ .remove = fsg_flash_remove,
|
|
+};
|
|
+
|
|
+static void __init fsg_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ fsg_flash_resource.end =
|
|
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
|
+
|
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
|
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
|
+
|
|
+ /* Configure CS2 for operation, 8bit and writable */
|
|
+ *IXP4XX_EXP_CS2 = 0xbfff0002;
|
|
+
|
|
+ /* This is only useful on a modified machine, but it is valuable
|
|
+ * to have it first in order to see debug messages, and so that
|
|
+ * it does *not* get removed if platform_add_devices fails!
|
|
+ */
|
|
+ (void)platform_device_register(&fsg_uart);
|
|
+
|
|
+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
|
|
+
|
|
+ register_mtd_user(&fsg_flash_notifier);
|
|
+}
|
|
+
|
|
+MACHINE_START(FSG, "Freecom FSG-3")
|
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .boot_params = 0x0100,
|
|
+ .init_machine = fsg_init,
|
|
+MACHINE_END
|
|
+
|
|
Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h
|
|
@@ -0,0 +1,58 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-ixp4xx/fsg.h
|
|
+ *
|
|
+ * Freecom FSG-3 platform specific definitions
|
|
+ *
|
|
+ * Author: Rod Whitby <rod@whitby.id.au>
|
|
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
|
|
+ * Maintainers: http://www.nslu2-linux.org
|
|
+ *
|
|
+ * Based on coyote.h by
|
|
+ * Copyright 2004 (c) MontaVista, Software, Inc.
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#ifndef __ASM_ARCH_HARDWARE_H__
|
|
+#error "Do not include this directly, instead #include <asm/hardware.h>"
|
|
+#endif
|
|
+
|
|
+#define FSG_SDA_PIN 12
|
|
+#define FSG_SCL_PIN 13
|
|
+
|
|
+/*
|
|
+ * FSG PCI IRQs
|
|
+ */
|
|
+#define FSG_PCI_MAX_DEV 3
|
|
+#define FSG_PCI_IRQ_LINES 3
|
|
+
|
|
+
|
|
+/* PCI controller GPIO to IRQ pin mappings */
|
|
+#define FSG_PCI_INTA_PIN 6
|
|
+#define FSG_PCI_INTB_PIN 7
|
|
+#define FSG_PCI_INTC_PIN 5
|
|
+
|
|
+/* Buttons */
|
|
+
|
|
+#define FSG_SB_GPIO 4
|
|
+#define FSG_RB_GPIO 9
|
|
+#define FSG_UB_GPIO 10
|
|
+
|
|
+#define FSG_SB_IRQ IRQ_IXP4XX_GPIO4
|
|
+#define FSG_RB_IRQ IRQ_IXP4XX_GPIO9
|
|
+#define FSG_UB_IRQ IRQ_IXP4XX_GPIO10
|
|
+
|
|
+#define FSG_SB_BM (1L << FSG_SB_GPIO)
|
|
+#define FSG_RB_BM (1L << FSG_RB_GPIO)
|
|
+#define FSG_UB_BM (1L << FSG_UB_GPIO)
|
|
+
|
|
+/* LEDs */
|
|
+
|
|
+#define FSG_LED_RING_BIT 0
|
|
+#define FSG_LED_SYNC_BIT 1
|
|
+#define FSG_LED_USB_BIT 2
|
|
+#define FSG_LED_SATA_BIT 3
|
|
+#define FSG_LED_WAN_BIT 4
|
|
+#define FSG_LED_WLAN_BIT 5
|
|
Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h
|
|
===================================================================
|
|
--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h
|
|
+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h
|
|
@@ -48,5 +48,6 @@ extern unsigned int processor_id;
|
|
#include "nslu2.h"
|
|
#include "nas100d.h"
|
|
#include "dsmg600.h"
|
|
+#include "fsg.h"
|
|
|
|
#endif /* _ASM_ARCH_HARDWARE_H */
|
|
Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h
|
|
===================================================================
|
|
--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h
|
|
+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h
|
|
@@ -128,4 +128,11 @@
|
|
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
|
|
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
|
|
|
|
+/*
|
|
+ * Freecom FSG-3 board IRQs
|
|
+ */
|
|
+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
|
|
+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
|
|
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
|
|
+
|
|
#endif
|
|
--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile~ 2007-07-11 22:20:52.000000000 +0930
|
|
+++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile 2007-07-11 22:22:02.000000000 +0930
|
|
@@ -13,6 +13,7 @@
|
|
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
|
|
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
|
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
|
|
+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
|
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
|
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
|
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
|
|
@@ -29,6 +30,7 @@
|
|
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
|
|
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
|
|
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
|
|
+obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
|
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
|
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
|
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
|
|
--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig~ 2007-07-11 22:23:24.000000000 +0930
|
|
+++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig 2007-07-11 22:23:47.000000000 +0930
|
|
@@ -138,6 +138,14 @@
|
|
DSM-G600 RevA device. For more information on this platform,
|
|
see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
|
|
|
|
+config MACH_FSG
|
|
+ bool
|
|
+ prompt "Freecom FSG-3"
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support Freecom's
|
|
+ FSG-3 device. For more information on this
|
|
+ platform see http://www.openfsg.com/
|
|
+
|
|
#
|
|
# Avila and IXDP share the same source for now. Will change in future
|
|
#
|