mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-14 15:21:56 +02:00
642064ae9a
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22323 3c298f89-4303-0410-b956-a3cf2f4a3e73
3351 lines
94 KiB
Diff
3351 lines
94 KiB
Diff
--- /dev/null
|
|
+++ b/drivers/ata/cns3xxx_ahci.c
|
|
@@ -0,0 +1,3281 @@
|
|
+/*
|
|
+ * ahci.c - AHCI SATA support
|
|
+ *
|
|
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
+ * Please ALWAYS copy linux-ide@vger.kernel.org
|
|
+ * on emails.
|
|
+ *
|
|
+ * Copyright 2004-2005 Red Hat, Inc.
|
|
+ *
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2, or (at your option)
|
|
+ * any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; see the file COPYING. If not, write to
|
|
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ *
|
|
+ *
|
|
+ * libata documentation is available via 'make {ps|pdf}docs',
|
|
+ * as Documentation/DocBook/libata.*
|
|
+ *
|
|
+ * AHCI hardware documentation:
|
|
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
|
|
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
|
|
+ *
|
|
+ */
|
|
+/*
|
|
+ * Cavium CNS3XXX notice
|
|
+ * This driver is copy from ahci, and this driver only modify memory access function.
|
|
+ * Let the driver support non-PCI device
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/blkdev.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/dmi.h>
|
|
+#include <scsi/scsi_host.h>
|
|
+#include <scsi/scsi_cmnd.h>
|
|
+#include <linux/libata.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <mach/pm.h>
|
|
+#include <mach/misc.h>
|
|
+
|
|
+#define DRV_NAME "cns3xxx_ahci"
|
|
+#define DRV_VERSION "3.0"
|
|
+
|
|
+#define MISC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT+offset)))
|
|
+#define CNS3XXX_MISC_REGISTER MISC_REG_VALUE(0x514)
|
|
+#define AHCI_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_SATA2_BASE_VIRT+offset)))
|
|
+#define CNS3XXX_AHCI_HOSTCTL_REG AHCI_REG_VALUE(0x04)
|
|
+
|
|
+/* Enclosure Management Control */
|
|
+#define EM_CTRL_MSG_TYPE 0x000f0000
|
|
+
|
|
+/* Enclosure Management LED Message Type */
|
|
+#define EM_MSG_LED_HBA_PORT 0x0000000f
|
|
+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
|
|
+#define EM_MSG_LED_VALUE 0xffff0000
|
|
+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
|
|
+#define EM_MSG_LED_VALUE_OFF 0xfff80000
|
|
+#define EM_MSG_LED_VALUE_ON 0x00010000
|
|
+
|
|
+/* PHY Misc Define */
|
|
+#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310)
|
|
+#define MISC_SATA_CORE_ID MISC_MEM_MAP_VALUE(0x600)
|
|
+#define MISC_SATA_PORT0_PHY_CFG MISC_MEM_MAP_VALUE(0x604)
|
|
+#define MISC_SATA_PORT1_PHY_CFG MISC_MEM_MAP_VALUE(0x608)
|
|
+#define MISC_SATA_PORT0_PHY_TST MISC_MEM_MAP_VALUE(0x60C)
|
|
+#define MISC_SATA_PORT1_PHY_TST MISC_MEM_MAP_VALUE(0x610)
|
|
+
|
|
+
|
|
+static int ahci_skip_host_reset;
|
|
+static int ahci_ignore_sss;
|
|
+
|
|
+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
|
|
+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
|
|
+
|
|
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
|
|
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
|
|
+
|
|
+static int ahci_enable_alpm(struct ata_port *ap,
|
|
+ enum link_pm policy);
|
|
+static void ahci_disable_alpm(struct ata_port *ap);
|
|
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
|
|
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
|
|
+ size_t size);
|
|
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
|
|
+ ssize_t size);
|
|
+
|
|
+enum {
|
|
+ AHCI_PCI_BAR = 5,
|
|
+ AHCI_MAX_PORTS = 32,
|
|
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
|
|
+ AHCI_DMA_BOUNDARY = 0xffffffff,
|
|
+ AHCI_MAX_CMDS = 32,
|
|
+ AHCI_CMD_SZ = 32,
|
|
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
|
|
+ AHCI_RX_FIS_SZ = 256,
|
|
+ AHCI_CMD_TBL_CDB = 0x40,
|
|
+ AHCI_CMD_TBL_HDR_SZ = 0x80,
|
|
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
|
|
+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
|
|
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
|
|
+ AHCI_RX_FIS_SZ,
|
|
+ AHCI_IRQ_ON_SG = (1 << 31),
|
|
+ AHCI_CMD_ATAPI = (1 << 5),
|
|
+ AHCI_CMD_WRITE = (1 << 6),
|
|
+ AHCI_CMD_PREFETCH = (1 << 7),
|
|
+ AHCI_CMD_RESET = (1 << 8),
|
|
+ AHCI_CMD_CLR_BUSY = (1 << 10),
|
|
+
|
|
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
|
|
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
|
|
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
|
|
+
|
|
+ board_ahci = 0,
|
|
+ board_ahci_vt8251 = 1,
|
|
+ board_ahci_ign_iferr = 2,
|
|
+ board_ahci_sb600 = 3,
|
|
+ board_ahci_mv = 4,
|
|
+ board_ahci_sb700 = 5, /* for SB700 and SB800 */
|
|
+ board_ahci_mcp65 = 6,
|
|
+ board_ahci_nopmp = 7,
|
|
+ board_ahci_yesncq = 8,
|
|
+
|
|
+ /* global controller registers */
|
|
+ HOST_CAP = 0x00, /* host capabilities */
|
|
+ HOST_CTL = 0x04, /* global host control */
|
|
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
|
|
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
|
|
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
|
|
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
|
|
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
|
|
+
|
|
+ /* HOST_CTL bits */
|
|
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
|
|
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
|
|
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
|
|
+
|
|
+ /* HOST_CAP bits */
|
|
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
|
|
+ HOST_CAP_SSC = (1 << 14), /* Slumber capable */
|
|
+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
|
|
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
|
|
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
|
|
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
|
|
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
|
|
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
|
|
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
|
|
+
|
|
+ /* registers for each SATA port */
|
|
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
|
|
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
|
|
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
|
|
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
|
|
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
|
|
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
|
|
+ PORT_CMD = 0x18, /* port command */
|
|
+ PORT_TFDATA = 0x20, /* taskfile data */
|
|
+ PORT_SIG = 0x24, /* device TF signature */
|
|
+ PORT_CMD_ISSUE = 0x38, /* command issue */
|
|
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
|
|
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
|
|
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
|
|
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
|
|
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
|
|
+
|
|
+ /* PORT_IRQ_{STAT,MASK} bits */
|
|
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
|
|
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
|
|
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
|
|
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
|
|
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
|
|
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
|
|
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
|
|
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
|
|
+
|
|
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
|
|
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
|
|
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
|
|
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
|
|
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
|
|
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
|
|
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
|
|
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
|
|
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
|
|
+
|
|
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
|
|
+ PORT_IRQ_IF_ERR |
|
|
+ PORT_IRQ_CONNECT |
|
|
+ PORT_IRQ_PHYRDY |
|
|
+ PORT_IRQ_UNK_FIS |
|
|
+ PORT_IRQ_BAD_PMP,
|
|
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
|
|
+ PORT_IRQ_TF_ERR |
|
|
+ PORT_IRQ_HBUS_DATA_ERR,
|
|
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
|
|
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
|
|
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
|
|
+
|
|
+ /* PORT_CMD bits */
|
|
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
|
|
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
|
|
+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
|
|
+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
|
|
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
|
|
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
|
|
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
|
|
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
|
|
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
|
|
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
|
|
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
|
|
+
|
|
+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
|
|
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
|
|
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
|
|
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
|
|
+
|
|
+ /* hpriv->flags bits */
|
|
+ AHCI_HFLAG_NO_NCQ = (1 << 0),
|
|
+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
|
|
+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
|
|
+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
|
|
+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
|
|
+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
|
|
+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
|
|
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
|
|
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
|
|
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
|
|
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
|
|
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
|
|
+ link offline */
|
|
+
|
|
+ /* ap->flags bits */
|
|
+
|
|
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
|
|
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
|
|
+ ATA_FLAG_IPM,
|
|
+
|
|
+ ICH_MAP = 0x90, /* ICH MAP register */
|
|
+
|
|
+ /* em constants */
|
|
+ EM_MAX_SLOTS = 8,
|
|
+ EM_MAX_RETRY = 5,
|
|
+
|
|
+ /* em_ctl bits */
|
|
+ EM_CTL_RST = (1 << 9), /* Reset */
|
|
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
|
|
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
|
|
+
|
|
+ /* CNS3XXX define */
|
|
+ HOST_TIMER1MS = 0xe0, /* Timer 1ms register */
|
|
+};
|
|
+
|
|
+struct ahci_cmd_hdr {
|
|
+ __le32 opts;
|
|
+ __le32 status;
|
|
+ __le32 tbl_addr;
|
|
+ __le32 tbl_addr_hi;
|
|
+ __le32 reserved[4];
|
|
+};
|
|
+
|
|
+struct ahci_sg {
|
|
+ __le32 addr;
|
|
+ __le32 addr_hi;
|
|
+ __le32 reserved;
|
|
+ __le32 flags_size;
|
|
+};
|
|
+
|
|
+struct ahci_em_priv {
|
|
+ enum sw_activity blink_policy;
|
|
+ struct timer_list timer;
|
|
+ unsigned long saved_activity;
|
|
+ unsigned long activity;
|
|
+ unsigned long led_state;
|
|
+};
|
|
+
|
|
+struct ahci_host_priv {
|
|
+ unsigned int flags; /* AHCI_HFLAG_* */
|
|
+ u32 cap; /* cap to use */
|
|
+ u32 port_map; /* port map to use */
|
|
+ u32 saved_cap; /* saved initial cap */
|
|
+ u32 saved_port_map; /* saved initial port_map */
|
|
+ u32 em_loc; /* enclosure management location */
|
|
+};
|
|
+
|
|
+struct ahci_port_priv {
|
|
+ struct ata_link *active_link;
|
|
+ struct ahci_cmd_hdr *cmd_slot;
|
|
+ dma_addr_t cmd_slot_dma;
|
|
+ void *cmd_tbl;
|
|
+ dma_addr_t cmd_tbl_dma;
|
|
+ void *rx_fis;
|
|
+ dma_addr_t rx_fis_dma;
|
|
+ /* for NCQ spurious interrupt analysis */
|
|
+ unsigned int ncq_saw_d2h:1;
|
|
+ unsigned int ncq_saw_dmas:1;
|
|
+ unsigned int ncq_saw_sdb:1;
|
|
+ u32 intr_mask; /* interrupts to enable */
|
|
+ /* enclosure management info per PM slot */
|
|
+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
|
|
+};
|
|
+
|
|
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
+#if 0
|
|
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
+#else
|
|
+static int ahci_probe(struct platform_device *pdev);
|
|
+static int ahci_remove(struct platform_device *pdev);
|
|
+#endif
|
|
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
|
|
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
|
|
+static int ahci_port_start(struct ata_port *ap);
|
|
+static void ahci_port_stop(struct ata_port *ap);
|
|
+static void ahci_qc_prep(struct ata_queued_cmd *qc);
|
|
+static void ahci_freeze(struct ata_port *ap);
|
|
+static void ahci_thaw(struct ata_port *ap);
|
|
+static void ahci_pmp_attach(struct ata_port *ap);
|
|
+static void ahci_pmp_detach(struct ata_port *ap);
|
|
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline);
|
|
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline);
|
|
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline);
|
|
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline);
|
|
+#if 0
|
|
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline);
|
|
+#endif
|
|
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
|
|
+static void ahci_error_handler(struct ata_port *ap);
|
|
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
+static int ahci_port_resume(struct ata_port *ap);
|
|
+static void ahci_dev_config(struct ata_device *dev);
|
|
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
+ u32 opts);
|
|
+#ifdef CONFIG_PM
|
|
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
|
|
+static int ahci_pci_device_resume(struct pci_dev *pdev);
|
|
+#endif
|
|
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
|
|
+static ssize_t ahci_activity_store(struct ata_device *dev,
|
|
+ enum sw_activity val);
|
|
+static void ahci_init_sw_activity(struct ata_link *link);
|
|
+
|
|
+static struct device_attribute *ahci_shost_attrs[] = {
|
|
+ &dev_attr_link_power_management_policy,
|
|
+ &dev_attr_em_message_type,
|
|
+ &dev_attr_em_message,
|
|
+ NULL
|
|
+};
|
|
+
|
|
+static struct device_attribute *ahci_sdev_attrs[] = {
|
|
+ &dev_attr_sw_activity,
|
|
+ &dev_attr_unload_heads,
|
|
+ NULL
|
|
+};
|
|
+
|
|
+static struct scsi_host_template ahci_sht = {
|
|
+ ATA_NCQ_SHT(DRV_NAME),
|
|
+ .can_queue = AHCI_MAX_CMDS - 1,
|
|
+ .sg_tablesize = AHCI_MAX_SG,
|
|
+ .dma_boundary = AHCI_DMA_BOUNDARY,
|
|
+ .shost_attrs = ahci_shost_attrs,
|
|
+ .sdev_attrs = ahci_sdev_attrs,
|
|
+};
|
|
+
|
|
+static struct ata_port_operations ahci_ops = {
|
|
+ .inherits = &sata_pmp_port_ops,
|
|
+
|
|
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
+ .qc_prep = ahci_qc_prep,
|
|
+ .qc_issue = ahci_qc_issue,
|
|
+ .qc_fill_rtf = ahci_qc_fill_rtf,
|
|
+
|
|
+ .freeze = ahci_freeze,
|
|
+ .thaw = ahci_thaw,
|
|
+ .softreset = ahci_softreset,
|
|
+ .hardreset = ahci_hardreset,
|
|
+ .postreset = ahci_postreset,
|
|
+ .pmp_softreset = ahci_softreset,
|
|
+ .error_handler = ahci_error_handler,
|
|
+ .post_internal_cmd = ahci_post_internal_cmd,
|
|
+ .dev_config = ahci_dev_config,
|
|
+
|
|
+ .scr_read = ahci_scr_read,
|
|
+ .scr_write = ahci_scr_write,
|
|
+ .pmp_attach = ahci_pmp_attach,
|
|
+ .pmp_detach = ahci_pmp_detach,
|
|
+
|
|
+ .enable_pm = ahci_enable_alpm,
|
|
+ .disable_pm = ahci_disable_alpm,
|
|
+ .em_show = ahci_led_show,
|
|
+ .em_store = ahci_led_store,
|
|
+ .sw_activity_show = ahci_activity_show,
|
|
+ .sw_activity_store = ahci_activity_store,
|
|
+#ifdef CONFIG_PM
|
|
+ .port_suspend = ahci_port_suspend,
|
|
+ .port_resume = ahci_port_resume,
|
|
+#endif
|
|
+ .port_start = ahci_port_start,
|
|
+ .port_stop = ahci_port_stop,
|
|
+};
|
|
+
|
|
+static struct ata_port_operations ahci_vt8251_ops = {
|
|
+ .inherits = &ahci_ops,
|
|
+ .hardreset = ahci_vt8251_hardreset,
|
|
+};
|
|
+
|
|
+#if 0
|
|
+static struct ata_port_operations ahci_p5wdh_ops = {
|
|
+ .inherits = &ahci_ops,
|
|
+ .hardreset = ahci_p5wdh_hardreset,
|
|
+};
|
|
+#endif
|
|
+
|
|
+static struct ata_port_operations ahci_sb600_ops = {
|
|
+ .inherits = &ahci_ops,
|
|
+ .softreset = ahci_sb600_softreset,
|
|
+ .pmp_softreset = ahci_sb600_softreset,
|
|
+};
|
|
+
|
|
+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
|
|
+
|
|
+static const struct ata_port_info ahci_port_info[] = {
|
|
+ [board_ahci] =
|
|
+ {
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+ [board_ahci_vt8251] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_vt8251_ops,
|
|
+ },
|
|
+ [board_ahci_ign_iferr] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+ [board_ahci_sb600] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
|
|
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_sb600_ops,
|
|
+ },
|
|
+ [board_ahci_mv] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
|
|
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
|
|
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+ [board_ahci_sb700] = /* for SB700 and SB800 */
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_sb600_ops,
|
|
+ },
|
|
+ [board_ahci_mcp65] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+ [board_ahci_nopmp] =
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+ /* board_ahci_yesncq */
|
|
+ {
|
|
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
|
|
+ .flags = AHCI_FLAG_COMMON,
|
|
+ .pio_mask = ATA_PIO4,
|
|
+ .udma_mask = ATA_UDMA6,
|
|
+ .port_ops = &ahci_ops,
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct pci_device_id ahci_pci_tbl[] = {
|
|
+ /* Intel */
|
|
+ { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
|
|
+ { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
|
|
+ { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
|
|
+ { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
|
|
+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
|
|
+ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
|
|
+ { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
|
|
+ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
|
|
+ { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
|
|
+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
|
|
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
|
|
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
|
|
+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
|
|
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
|
|
+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
|
|
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
|
|
+
|
|
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
|
|
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
|
|
+
|
|
+ /* ATI */
|
|
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
|
|
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
|
|
+
|
|
+ /* VIA */
|
|
+ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
+ { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
+
|
|
+ /* NVIDIA */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
|
|
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
|
|
+
|
|
+ /* SiS */
|
|
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
|
|
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
|
|
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
|
|
+
|
|
+ /* Marvell */
|
|
+ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
|
|
+ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
|
|
+
|
|
+ /* Promise */
|
|
+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
|
|
+
|
|
+ /* Generic, PCI class code for AHCI */
|
|
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
|
|
+
|
|
+ { } /* terminate list */
|
|
+};
|
|
+
|
|
+
|
|
+#if 0
|
|
+static struct pci_driver ahci_pci_driver = {
|
|
+ .name = DRV_NAME,
|
|
+ .id_table = ahci_pci_tbl,
|
|
+ .probe = ahci_init_one,
|
|
+ .remove = ata_pci_remove_one,
|
|
+#ifdef CONFIG_PM
|
|
+ .suspend = ahci_pci_device_suspend,
|
|
+ .resume = ahci_pci_device_resume,
|
|
+#endif
|
|
+};
|
|
+#else
|
|
+static struct platform_driver ahci_driver = {
|
|
+ .probe = ahci_probe,
|
|
+ .remove = __devexit_p(ahci_remove),
|
|
+ .driver = {
|
|
+ .name = DRV_NAME,
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+#endif
|
|
+
|
|
+static int ahci_em_messages = 1;
|
|
+module_param(ahci_em_messages, int, 0444);
|
|
+/* add other LED protocol types when they become supported */
|
|
+MODULE_PARM_DESC(ahci_em_messages,
|
|
+ "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
|
|
+
|
|
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
|
|
+static int marvell_enable;
|
|
+#else
|
|
+static int marvell_enable = 1;
|
|
+#endif
|
|
+module_param(marvell_enable, int, 0644);
|
|
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
|
|
+
|
|
+
|
|
+static inline int ahci_nr_ports(u32 cap)
|
|
+{
|
|
+ return (cap & 0x1f) + 1;
|
|
+}
|
|
+
|
|
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
|
|
+ unsigned int port_no)
|
|
+{
|
|
+#if 0
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+
|
|
+ return mmio + 0x100 + (port_no * 0x80);
|
|
+}
|
|
+
|
|
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
|
|
+{
|
|
+ return __ahci_port_base(ap->host, ap->port_no);
|
|
+}
|
|
+
|
|
+static void ahci_enable_ahci(void __iomem *mmio)
|
|
+{
|
|
+ int i;
|
|
+ u32 tmp;
|
|
+
|
|
+ /* turn on AHCI_EN */
|
|
+ tmp = readl(mmio + HOST_CTL);
|
|
+ if (tmp & HOST_AHCI_EN)
|
|
+ return;
|
|
+
|
|
+ /* Some controllers need AHCI_EN to be written multiple times.
|
|
+ * Try a few times before giving up.
|
|
+ */
|
|
+ for (i = 0; i < 5; i++) {
|
|
+ tmp |= HOST_AHCI_EN;
|
|
+ writel(tmp, mmio + HOST_CTL);
|
|
+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
|
|
+ if (tmp & HOST_AHCI_EN)
|
|
+ return;
|
|
+ msleep(10);
|
|
+ }
|
|
+
|
|
+ WARN_ON(1);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * ahci_save_initial_config - Save and fixup initial config values
|
|
+ * @pdev: target PCI device
|
|
+ * @hpriv: host private area to store config values
|
|
+ *
|
|
+ * Some registers containing configuration info might be setup by
|
|
+ * BIOS and might be cleared on reset. This function saves the
|
|
+ * initial values of those registers into @hpriv such that they
|
|
+ * can be restored after controller reset.
|
|
+ *
|
|
+ * If inconsistent, config values are fixed up by this function.
|
|
+ *
|
|
+ * LOCKING:
|
|
+ * None.
|
|
+ */
|
|
+#if 0
|
|
+static void ahci_save_initial_config(struct pci_dev *pdev,
|
|
+ struct ahci_host_priv *hpriv)
|
|
+#else
|
|
+static void ahci_save_initial_config(struct platform_device *pdev,
|
|
+ struct ahci_host_priv *hpriv,
|
|
+ u8 * base)
|
|
+#endif
|
|
+{
|
|
+#if 0
|
|
+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)base;
|
|
+#endif
|
|
+ u32 cap, port_map;
|
|
+ int i;
|
|
+#if 0
|
|
+ int mv;
|
|
+#endif
|
|
+
|
|
+ /* make sure AHCI mode is enabled before accessing CAP */
|
|
+ ahci_enable_ahci(mmio);
|
|
+
|
|
+ /* Values prefixed with saved_ are written back to host after
|
|
+ * reset. Values without are used for driver operation.
|
|
+ */
|
|
+ hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
|
|
+ hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
|
|
+
|
|
+ /* some chips have errata preventing 64bit use */
|
|
+ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "controller can't do 64bit DMA, forcing 32bit\n");
|
|
+ cap &= ~HOST_CAP_64;
|
|
+ }
|
|
+
|
|
+ if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "controller can't do NCQ, turning off CAP_NCQ\n");
|
|
+ cap &= ~HOST_CAP_NCQ;
|
|
+ }
|
|
+
|
|
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "controller can do NCQ, turning on CAP_NCQ\n");
|
|
+ cap |= HOST_CAP_NCQ;
|
|
+ }
|
|
+
|
|
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "controller can't do PMP, turning off CAP_PMP\n");
|
|
+ cap &= ~HOST_CAP_PMP;
|
|
+ }
|
|
+#if 0
|
|
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
|
|
+ port_map != 1) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
|
|
+ port_map, 1);
|
|
+ port_map = 1;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Temporary Marvell 6145 hack: PATA port presence
|
|
+ * is asserted through the standard AHCI port
|
|
+ * presence register, as bit 4 (counting from 0)
|
|
+ */
|
|
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
+ if (pdev->device == 0x6121)
|
|
+ mv = 0x3;
|
|
+ else
|
|
+ mv = 0xf;
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "MV_AHCI HACK: port_map %x -> %x\n",
|
|
+ port_map,
|
|
+ port_map & mv);
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
|
|
+
|
|
+ port_map &= mv;
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ /* cross check port_map and cap.n_ports */
|
|
+ if (port_map) {
|
|
+ int map_ports = 0;
|
|
+
|
|
+ for (i = 0; i < AHCI_MAX_PORTS; i++)
|
|
+ if (port_map & (1 << i))
|
|
+ map_ports++;
|
|
+
|
|
+ /* If PI has more ports than n_ports, whine, clear
|
|
+ * port_map and let it be generated from n_ports.
|
|
+ */
|
|
+ if (map_ports > ahci_nr_ports(cap)) {
|
|
+ dev_printk(KERN_WARNING, &pdev->dev,
|
|
+ "implemented port map (0x%x) contains more "
|
|
+ "ports than nr_ports (%u), using nr_ports\n",
|
|
+ port_map, ahci_nr_ports(cap));
|
|
+ port_map = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* fabricate port_map from cap.nr_ports */
|
|
+ if (!port_map) {
|
|
+ port_map = (1 << ahci_nr_ports(cap)) - 1;
|
|
+ dev_printk(KERN_WARNING, &pdev->dev,
|
|
+ "forcing PORTS_IMPL to 0x%x\n", port_map);
|
|
+
|
|
+ /* write the fixed up value to the PI register */
|
|
+ hpriv->saved_port_map = port_map;
|
|
+ }
|
|
+
|
|
+ /* record values to use during operation */
|
|
+ hpriv->cap = cap;
|
|
+ hpriv->port_map = port_map;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * ahci_restore_initial_config - Restore initial config
|
|
+ * @host: target ATA host
|
|
+ *
|
|
+ * Restore initial config stored by ahci_save_initial_config().
|
|
+ *
|
|
+ * LOCKING:
|
|
+ * None.
|
|
+ */
|
|
+static void ahci_restore_initial_config(struct ata_host *host)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = host->private_data;
|
|
+#if 0
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+
|
|
+ writel(hpriv->saved_cap, mmio + HOST_CAP);
|
|
+ writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
|
|
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
|
|
+}
|
|
+
|
|
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
|
|
+{
|
|
+ static const int offset[] = {
|
|
+ [SCR_STATUS] = PORT_SCR_STAT,
|
|
+ [SCR_CONTROL] = PORT_SCR_CTL,
|
|
+ [SCR_ERROR] = PORT_SCR_ERR,
|
|
+ [SCR_ACTIVE] = PORT_SCR_ACT,
|
|
+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
|
|
+ };
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+
|
|
+ if (sc_reg < ARRAY_SIZE(offset) &&
|
|
+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
|
|
+ return offset[sc_reg];
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
+ int offset = ahci_scr_offset(link->ap, sc_reg);
|
|
+
|
|
+ if (offset) {
|
|
+ *val = readl(port_mmio + offset);
|
|
+ return 0;
|
|
+ }
|
|
+ return -EINVAL;
|
|
+}
|
|
+
|
|
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
+ int offset = ahci_scr_offset(link->ap, sc_reg);
|
|
+
|
|
+ if (offset) {
|
|
+ writel(val, port_mmio + offset);
|
|
+ return 0;
|
|
+ }
|
|
+ return -EINVAL;
|
|
+}
|
|
+
|
|
+static void ahci_start_engine(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 tmp;
|
|
+
|
|
+ /* start DMA */
|
|
+ tmp = readl(port_mmio + PORT_CMD);
|
|
+ tmp |= PORT_CMD_START;
|
|
+ writel(tmp, port_mmio + PORT_CMD);
|
|
+ readl(port_mmio + PORT_CMD); /* flush */
|
|
+}
|
|
+
|
|
+static int ahci_stop_engine(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 tmp;
|
|
+
|
|
+ tmp = readl(port_mmio + PORT_CMD);
|
|
+
|
|
+ /* check if the HBA is idle */
|
|
+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
|
|
+ return 0;
|
|
+
|
|
+ /* setting HBA to idle */
|
|
+ tmp &= ~PORT_CMD_START;
|
|
+ writel(tmp, port_mmio + PORT_CMD);
|
|
+
|
|
+ /* wait for engine to stop. This could be as long as 500 msec */
|
|
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
|
|
+ if (tmp & PORT_CMD_LIST_ON)
|
|
+ return -EIO;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ahci_start_fis_rx(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u32 tmp;
|
|
+
|
|
+ /* set FIS registers */
|
|
+ if (hpriv->cap & HOST_CAP_64)
|
|
+ writel((pp->cmd_slot_dma >> 16) >> 16,
|
|
+ port_mmio + PORT_LST_ADDR_HI);
|
|
+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
|
|
+
|
|
+ if (hpriv->cap & HOST_CAP_64)
|
|
+ writel((pp->rx_fis_dma >> 16) >> 16,
|
|
+ port_mmio + PORT_FIS_ADDR_HI);
|
|
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
|
|
+
|
|
+ /* enable FIS reception */
|
|
+ tmp = readl(port_mmio + PORT_CMD);
|
|
+ tmp |= PORT_CMD_FIS_RX;
|
|
+ writel(tmp, port_mmio + PORT_CMD);
|
|
+
|
|
+ /* flush */
|
|
+ readl(port_mmio + PORT_CMD);
|
|
+}
|
|
+
|
|
+static int ahci_stop_fis_rx(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 tmp;
|
|
+
|
|
+ /* disable FIS reception */
|
|
+ tmp = readl(port_mmio + PORT_CMD);
|
|
+ tmp &= ~PORT_CMD_FIS_RX;
|
|
+ writel(tmp, port_mmio + PORT_CMD);
|
|
+
|
|
+ /* wait for completion, spec says 500ms, give it 1000 */
|
|
+ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
|
|
+ PORT_CMD_FIS_ON, 10, 1000);
|
|
+ if (tmp & PORT_CMD_FIS_ON)
|
|
+ return -EBUSY;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ahci_power_up(struct ata_port *ap)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 cmd;
|
|
+
|
|
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
+
|
|
+ /* spin up device */
|
|
+ if (hpriv->cap & HOST_CAP_SSS) {
|
|
+ cmd |= PORT_CMD_SPIN_UP;
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+ }
|
|
+
|
|
+ /* wake up link */
|
|
+ writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
|
|
+}
|
|
+
|
|
+static void ahci_disable_alpm(struct ata_port *ap)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 cmd;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+
|
|
+ /* IPM bits should be disabled by libata-core */
|
|
+ /* get the existing command bits */
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+
|
|
+ /* disable ALPM and ASP */
|
|
+ cmd &= ~PORT_CMD_ASP;
|
|
+ cmd &= ~PORT_CMD_ALPE;
|
|
+
|
|
+ /* force the interface back to active */
|
|
+ cmd |= PORT_CMD_ICC_ACTIVE;
|
|
+
|
|
+ /* write out new cmd value */
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+
|
|
+ /* wait 10ms to be sure we've come out of any low power state */
|
|
+ msleep(10);
|
|
+
|
|
+ /* clear out any PhyRdy stuff from interrupt status */
|
|
+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
|
|
+
|
|
+ /* go ahead and clean out PhyRdy Change from Serror too */
|
|
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
+
|
|
+ /*
|
|
+ * Clear flag to indicate that we should ignore all PhyRdy
|
|
+ * state changes
|
|
+ */
|
|
+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
|
|
+
|
|
+ /*
|
|
+ * Enable interrupts on Phy Ready.
|
|
+ */
|
|
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
|
|
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
+
|
|
+ /*
|
|
+ * don't change the link pm policy - we can be called
|
|
+ * just to turn of link pm temporarily
|
|
+ */
|
|
+}
|
|
+
|
|
+static int ahci_enable_alpm(struct ata_port *ap,
|
|
+ enum link_pm policy)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 cmd;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u32 asp;
|
|
+
|
|
+ /* Make sure the host is capable of link power management */
|
|
+ if (!(hpriv->cap & HOST_CAP_ALPM))
|
|
+ return -EINVAL;
|
|
+
|
|
+ switch (policy) {
|
|
+ case MAX_PERFORMANCE:
|
|
+ case NOT_AVAILABLE:
|
|
+ /*
|
|
+ * if we came here with NOT_AVAILABLE,
|
|
+ * it just means this is the first time we
|
|
+ * have tried to enable - default to max performance,
|
|
+ * and let the user go to lower power modes on request.
|
|
+ */
|
|
+ ahci_disable_alpm(ap);
|
|
+ return 0;
|
|
+ case MIN_POWER:
|
|
+ /* configure HBA to enter SLUMBER */
|
|
+ asp = PORT_CMD_ASP;
|
|
+ break;
|
|
+ case MEDIUM_POWER:
|
|
+ /* configure HBA to enter PARTIAL */
|
|
+ asp = 0;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Disable interrupts on Phy Ready. This keeps us from
|
|
+ * getting woken up due to spurious phy ready interrupts
|
|
+ * TBD - Hot plug should be done via polling now, is
|
|
+ * that even supported?
|
|
+ */
|
|
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
|
|
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
+
|
|
+ /*
|
|
+ * Set a flag to indicate that we should ignore all PhyRdy
|
|
+ * state changes since these can happen now whenever we
|
|
+ * change link state
|
|
+ */
|
|
+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
|
|
+
|
|
+ /* get the existing command bits */
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+
|
|
+ /*
|
|
+ * Set ASP based on Policy
|
|
+ */
|
|
+ cmd |= asp;
|
|
+
|
|
+ /*
|
|
+ * Setting this bit will instruct the HBA to aggressively
|
|
+ * enter a lower power link state when it's appropriate and
|
|
+ * based on the value set above for ASP
|
|
+ */
|
|
+ cmd |= PORT_CMD_ALPE;
|
|
+
|
|
+ /* write out new cmd value */
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+
|
|
+ /* IPM bits should be set by libata-core */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+static void ahci_power_down(struct ata_port *ap)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 cmd, scontrol;
|
|
+
|
|
+ if (!(hpriv->cap & HOST_CAP_SSS))
|
|
+ return;
|
|
+
|
|
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
|
|
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
|
|
+ scontrol &= ~0xf;
|
|
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
|
|
+
|
|
+ /* then set PxCMD.SUD to 0 */
|
|
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
+ cmd &= ~PORT_CMD_SPIN_UP;
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void ahci_start_port(struct ata_port *ap)
|
|
+{
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ata_link *link;
|
|
+ struct ahci_em_priv *emp;
|
|
+ ssize_t rc;
|
|
+ int i;
|
|
+
|
|
+ /* enable FIS reception */
|
|
+ ahci_start_fis_rx(ap);
|
|
+
|
|
+ /* enable DMA */
|
|
+ ahci_start_engine(ap);
|
|
+
|
|
+ /* turn on LEDs */
|
|
+ if (ap->flags & ATA_FLAG_EM) {
|
|
+ ata_for_each_link(link, ap, EDGE) {
|
|
+ emp = &pp->em_priv[link->pmp];
|
|
+
|
|
+ /* EM Transmit bit maybe busy during init */
|
|
+ for (i = 0; i < EM_MAX_RETRY; i++) {
|
|
+ rc = ahci_transmit_led_message(ap,
|
|
+ emp->led_state,
|
|
+ 4);
|
|
+ if (rc == -EBUSY)
|
|
+ msleep(1);
|
|
+ else
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
|
|
+ ata_for_each_link(link, ap, EDGE)
|
|
+ ahci_init_sw_activity(link);
|
|
+
|
|
+}
|
|
+
|
|
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
|
|
+{
|
|
+ int rc;
|
|
+
|
|
+ /* disable DMA */
|
|
+ rc = ahci_stop_engine(ap);
|
|
+ if (rc) {
|
|
+ *emsg = "failed to stop engine";
|
|
+ return rc;
|
|
+ }
|
|
+
|
|
+ /* disable FIS reception */
|
|
+ rc = ahci_stop_fis_rx(ap);
|
|
+ if (rc) {
|
|
+ *emsg = "failed stop FIS RX";
|
|
+ return rc;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ahci_reset_controller(struct ata_host *host)
|
|
+{
|
|
+#if 0
|
|
+ struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
+ struct ahci_host_priv *hpriv = host->private_data;
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ u32 tmp;
|
|
+
|
|
+ /* we must be in AHCI mode, before using anything
|
|
+ * AHCI-specific, such as HOST_RESET.
|
|
+ */
|
|
+ ahci_enable_ahci(mmio);
|
|
+
|
|
+ /* global controller reset */
|
|
+ if (!ahci_skip_host_reset) {
|
|
+ tmp = readl(mmio + HOST_CTL);
|
|
+ if ((tmp & HOST_RESET) == 0) {
|
|
+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
|
|
+ readl(mmio + HOST_CTL); /* flush */
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * to perform host reset, OS should set HOST_RESET
|
|
+ * and poll until this bit is read to be "0".
|
|
+ * reset must complete within 1 second, or
|
|
+ * the hardware should be considered fried.
|
|
+ */
|
|
+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
|
|
+ HOST_RESET, 10, 1000);
|
|
+
|
|
+ if (tmp & HOST_RESET) {
|
|
+ dev_printk(KERN_ERR, host->dev,
|
|
+ "controller reset failed (0x%x)\n", tmp);
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ /* turn on AHCI mode */
|
|
+ ahci_enable_ahci(mmio);
|
|
+
|
|
+ /* Some registers might be cleared on reset. Restore
|
|
+ * initial values.
|
|
+ */
|
|
+ ahci_restore_initial_config(host);
|
|
+ } else
|
|
+ dev_printk(KERN_INFO, host->dev,
|
|
+ "skipping global host reset\n");
|
|
+
|
|
+#if 0
|
|
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
|
|
+ u16 tmp16;
|
|
+
|
|
+ /* configure PCS */
|
|
+ pci_read_config_word(pdev, 0x92, &tmp16);
|
|
+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
|
|
+ tmp16 |= hpriv->port_map;
|
|
+ pci_write_config_word(pdev, 0x92, tmp16);
|
|
+ }
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ahci_sw_activity(struct ata_link *link)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
+
|
|
+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
|
|
+ return;
|
|
+
|
|
+ emp->activity++;
|
|
+ if (!timer_pending(&emp->timer))
|
|
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
|
|
+}
|
|
+
|
|
+static void ahci_sw_activity_blink(unsigned long arg)
|
|
+{
|
|
+ struct ata_link *link = (struct ata_link *)arg;
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
+ unsigned long led_message = emp->led_state;
|
|
+ u32 activity_led_state;
|
|
+ unsigned long flags;
|
|
+
|
|
+ led_message &= EM_MSG_LED_VALUE;
|
|
+ led_message |= ap->port_no | (link->pmp << 8);
|
|
+
|
|
+ /* check to see if we've had activity. If so,
|
|
+ * toggle state of LED and reset timer. If not,
|
|
+ * turn LED to desired idle state.
|
|
+ */
|
|
+ spin_lock_irqsave(ap->lock, flags);
|
|
+ if (emp->saved_activity != emp->activity) {
|
|
+ emp->saved_activity = emp->activity;
|
|
+ /* get the current LED state */
|
|
+ activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
|
|
+
|
|
+ if (activity_led_state)
|
|
+ activity_led_state = 0;
|
|
+ else
|
|
+ activity_led_state = 1;
|
|
+
|
|
+ /* clear old state */
|
|
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
+
|
|
+ /* toggle state */
|
|
+ led_message |= (activity_led_state << 16);
|
|
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
|
|
+ } else {
|
|
+ /* switch to idle */
|
|
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
+ if (emp->blink_policy == BLINK_OFF)
|
|
+ led_message |= (1 << 16);
|
|
+ }
|
|
+ spin_unlock_irqrestore(ap->lock, flags);
|
|
+ ahci_transmit_led_message(ap, led_message, 4);
|
|
+}
|
|
+
|
|
+static void ahci_init_sw_activity(struct ata_link *link)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
+
|
|
+ /* init activity stats, setup timer */
|
|
+ emp->saved_activity = emp->activity = 0;
|
|
+ setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
|
|
+
|
|
+ /* check our blink policy and set flag for link if it's enabled */
|
|
+ if (emp->blink_policy)
|
|
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
|
|
+}
|
|
+
|
|
+static int ahci_reset_em(struct ata_host *host)
|
|
+{
|
|
+#if 0
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ u32 em_ctl;
|
|
+
|
|
+ em_ctl = readl(mmio + HOST_EM_CTL);
|
|
+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
|
|
+ return -EINVAL;
|
|
+
|
|
+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
|
|
+ ssize_t size)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+#if 0
|
|
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ u32 em_ctl;
|
|
+ u32 message[] = {0, 0};
|
|
+ unsigned long flags;
|
|
+ int pmp;
|
|
+ struct ahci_em_priv *emp;
|
|
+
|
|
+ /* get the slot number from the message */
|
|
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
|
|
+ if (pmp < EM_MAX_SLOTS)
|
|
+ emp = &pp->em_priv[pmp];
|
|
+ else
|
|
+ return -EINVAL;
|
|
+
|
|
+ spin_lock_irqsave(ap->lock, flags);
|
|
+
|
|
+ /*
|
|
+ * if we are still busy transmitting a previous message,
|
|
+ * do not allow
|
|
+ */
|
|
+ em_ctl = readl(mmio + HOST_EM_CTL);
|
|
+ if (em_ctl & EM_CTL_TM) {
|
|
+ spin_unlock_irqrestore(ap->lock, flags);
|
|
+ return -EBUSY;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * create message header - this is all zero except for
|
|
+ * the message size, which is 4 bytes.
|
|
+ */
|
|
+ message[0] |= (4 << 8);
|
|
+
|
|
+ /* ignore 0:4 of byte zero, fill in port info yourself */
|
|
+ message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
|
|
+
|
|
+ /* write message to EM_LOC */
|
|
+ writel(message[0], mmio + hpriv->em_loc);
|
|
+ writel(message[1], mmio + hpriv->em_loc+4);
|
|
+
|
|
+ /* save off new led state for port/slot */
|
|
+ emp->led_state = state;
|
|
+
|
|
+ /*
|
|
+ * tell hardware to transmit the message
|
|
+ */
|
|
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
|
|
+
|
|
+ spin_unlock_irqrestore(ap->lock, flags);
|
|
+ return size;
|
|
+}
|
|
+
|
|
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
|
|
+{
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ata_link *link;
|
|
+ struct ahci_em_priv *emp;
|
|
+ int rc = 0;
|
|
+
|
|
+ ata_for_each_link(link, ap, EDGE) {
|
|
+ emp = &pp->em_priv[link->pmp];
|
|
+ rc += sprintf(buf, "%lx\n", emp->led_state);
|
|
+ }
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
|
|
+ size_t size)
|
|
+{
|
|
+ int state;
|
|
+ int pmp;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp;
|
|
+
|
|
+ state = simple_strtoul(buf, NULL, 0);
|
|
+
|
|
+ /* get the slot number from the message */
|
|
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
|
|
+ if (pmp < EM_MAX_SLOTS)
|
|
+ emp = &pp->em_priv[pmp];
|
|
+ else
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* mask off the activity bits if we are in sw_activity
|
|
+ * mode, user should turn off sw_activity before setting
|
|
+ * activity led through em_message
|
|
+ */
|
|
+ if (emp->blink_policy)
|
|
+ state &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
+
|
|
+ return ahci_transmit_led_message(ap, state, size);
|
|
+}
|
|
+
|
|
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
|
|
+{
|
|
+ struct ata_link *link = dev->link;
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
+ u32 port_led_state = emp->led_state;
|
|
+
|
|
+ /* save the desired Activity LED behavior */
|
|
+ if (val == OFF) {
|
|
+ /* clear LFLAG */
|
|
+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
|
|
+
|
|
+ /* set the LED to OFF */
|
|
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
|
|
+ port_led_state |= (ap->port_no | (link->pmp << 8));
|
|
+ ahci_transmit_led_message(ap, port_led_state, 4);
|
|
+ } else {
|
|
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
|
|
+ if (val == BLINK_OFF) {
|
|
+ /* set LED to ON for idle */
|
|
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
|
|
+ port_led_state |= (ap->port_no | (link->pmp << 8));
|
|
+ port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
|
|
+ ahci_transmit_led_message(ap, port_led_state, 4);
|
|
+ }
|
|
+ }
|
|
+ emp->blink_policy = val;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
|
|
+{
|
|
+ struct ata_link *link = dev->link;
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
+
|
|
+ /* display the saved value of activity behavior for this
|
|
+ * disk.
|
|
+ */
|
|
+ return sprintf(buf, "%d\n", emp->blink_policy);
|
|
+}
|
|
+
|
|
+#if 0
|
|
+static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
|
|
+ int port_no, void __iomem *mmio,
|
|
+ void __iomem *port_mmio)
|
|
+#else
|
|
+static void ahci_port_init(struct platform_device *pdev, struct ata_port *ap,
|
|
+ int port_no, void __iomem *mmio,
|
|
+ void __iomem *port_mmio)
|
|
+#endif
|
|
+{
|
|
+ const char *emsg = NULL;
|
|
+ int rc;
|
|
+ u32 tmp;
|
|
+
|
|
+ /* make sure port is not active */
|
|
+ rc = ahci_deinit_port(ap, &emsg);
|
|
+ if (rc)
|
|
+ dev_printk(KERN_WARNING, &pdev->dev,
|
|
+ "%s (%d)\n", emsg, rc);
|
|
+
|
|
+ /* clear SError */
|
|
+ tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
|
|
+ writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
+
|
|
+ /* clear port IRQ */
|
|
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
+ if (tmp)
|
|
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
+
|
|
+ writel(1 << port_no, mmio + HOST_IRQ_STAT);
|
|
+}
|
|
+
|
|
+static void ahci_init_controller(struct ata_host *host)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = host->private_data;
|
|
+#if 0
|
|
+ struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ struct platform_device *pdev = to_platform_device(host->dev);
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ int i;
|
|
+ void __iomem *port_mmio;
|
|
+ u32 tmp;
|
|
+ int mv;
|
|
+
|
|
+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
+#if 0
|
|
+ if (pdev->device == 0x6121)
|
|
+ mv = 2;
|
|
+ else
|
|
+ mv = 4;
|
|
+#else
|
|
+ mv = 0;
|
|
+#endif
|
|
+ port_mmio = __ahci_port_base(host, mv);
|
|
+
|
|
+ writel(0, port_mmio + PORT_IRQ_MASK);
|
|
+
|
|
+ /* clear port IRQ */
|
|
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
+ if (tmp)
|
|
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
+ }
|
|
+
|
|
+ /* set Timer 1ms, hclk = 200Mhz */
|
|
+ /* FIXME: Add auto detect function */
|
|
+ printk("CPU clock : %d \n", cns3xxx_cpu_clock());
|
|
+ tmp = readl(mmio + HOST_TIMER1MS);
|
|
+ printk("*** Timer 1ms: %d(0x%x) ***\n",tmp,tmp);
|
|
+ writel(cns3xxx_cpu_clock()*500, mmio + HOST_TIMER1MS);
|
|
+ tmp = readl(mmio + HOST_TIMER1MS);
|
|
+ printk("*** Set to: %d(0x%x) ***\n",tmp, tmp);
|
|
+
|
|
+
|
|
+
|
|
+ for (i = 0; i < host->n_ports; i++) {
|
|
+ struct ata_port *ap = host->ports[i];
|
|
+
|
|
+ port_mmio = ahci_port_base(ap);
|
|
+ if (ata_port_is_dummy(ap))
|
|
+ continue;
|
|
+
|
|
+ ahci_port_init(pdev, ap, i, mmio, port_mmio);
|
|
+ }
|
|
+
|
|
+ tmp = readl(mmio + HOST_CTL);
|
|
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
|
|
+ tmp = readl(mmio + HOST_CTL);
|
|
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
+}
|
|
+
|
|
+static void ahci_dev_config(struct ata_device *dev)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
|
|
+
|
|
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
|
|
+ dev->max_sectors = 255;
|
|
+ ata_dev_printk(dev, KERN_INFO,
|
|
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int ahci_dev_classify(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ata_taskfile tf;
|
|
+ u32 tmp;
|
|
+
|
|
+ tmp = readl(port_mmio + PORT_SIG);
|
|
+ tf.lbah = (tmp >> 24) & 0xff;
|
|
+ tf.lbam = (tmp >> 16) & 0xff;
|
|
+ tf.lbal = (tmp >> 8) & 0xff;
|
|
+ tf.nsect = (tmp) & 0xff;
|
|
+
|
|
+ return ata_dev_classify(&tf);
|
|
+}
|
|
+
|
|
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
+ u32 opts)
|
|
+{
|
|
+ dma_addr_t cmd_tbl_dma;
|
|
+
|
|
+ cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
|
|
+
|
|
+#if 0
|
|
+ pp->cmd_slot[tag].opts = cpu_to_le32(opts);
|
|
+#else
|
|
+ pp->cmd_slot[tag].opts = opts;
|
|
+#endif
|
|
+ pp->cmd_slot[tag].status = 0;
|
|
+#if 0
|
|
+ pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
|
|
+ pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
|
|
+#else
|
|
+ pp->cmd_slot[tag].tbl_addr = cmd_tbl_dma & 0xffffffff;
|
|
+ pp->cmd_slot[tag].tbl_addr_hi = (cmd_tbl_dma >> 16) >> 16;
|
|
+#endif
|
|
+}
|
|
+
|
|
+static int ahci_kick_engine(struct ata_port *ap, int force_restart)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
+ u32 tmp;
|
|
+ int busy, rc;
|
|
+
|
|
+ /* do we need to kick the port? */
|
|
+ busy = status & (ATA_BUSY | ATA_DRQ);
|
|
+ if (!busy && !force_restart)
|
|
+ return 0;
|
|
+
|
|
+ /* stop engine */
|
|
+ rc = ahci_stop_engine(ap);
|
|
+ if (rc)
|
|
+ goto out_restart;
|
|
+
|
|
+ /* need to do CLO? */
|
|
+ if (!busy) {
|
|
+ rc = 0;
|
|
+ goto out_restart;
|
|
+ }
|
|
+
|
|
+ if (!(hpriv->cap & HOST_CAP_CLO)) {
|
|
+ rc = -EOPNOTSUPP;
|
|
+ goto out_restart;
|
|
+ }
|
|
+
|
|
+ /* perform CLO */
|
|
+ tmp = readl(port_mmio + PORT_CMD);
|
|
+ tmp |= PORT_CMD_CLO;
|
|
+ writel(tmp, port_mmio + PORT_CMD);
|
|
+
|
|
+ rc = 0;
|
|
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
+ PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
|
|
+ if (tmp & PORT_CMD_CLO)
|
|
+ rc = -EIO;
|
|
+
|
|
+ /* restart engine */
|
|
+ out_restart:
|
|
+ ahci_start_engine(ap);
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
|
|
+ struct ata_taskfile *tf, int is_cmd, u16 flags,
|
|
+ unsigned long timeout_msec)
|
|
+{
|
|
+ const u32 cmd_fis_len = 5; /* five dwords */
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u8 *fis = pp->cmd_tbl;
|
|
+ u32 tmp;
|
|
+
|
|
+ /* prep the command */
|
|
+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
|
|
+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
|
|
+
|
|
+ /* issue & wait */
|
|
+ writel(1, port_mmio + PORT_CMD_ISSUE);
|
|
+
|
|
+ if (timeout_msec) {
|
|
+ tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
|
|
+ 1, timeout_msec);
|
|
+ if (tmp & 0x1) {
|
|
+ ahci_kick_engine(ap, 1);
|
|
+ return -EBUSY;
|
|
+ }
|
|
+ } else
|
|
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
|
|
+ int pmp, unsigned long deadline,
|
|
+ int (*check_ready)(struct ata_link *link))
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ const char *reason = NULL;
|
|
+ unsigned long now, msecs;
|
|
+ struct ata_taskfile tf;
|
|
+ int rc;
|
|
+
|
|
+ DPRINTK("ENTER\n");
|
|
+
|
|
+ /* prepare for SRST (AHCI-1.1 10.4.1) */
|
|
+ rc = ahci_kick_engine(ap, 1);
|
|
+ if (rc && rc != -EOPNOTSUPP)
|
|
+ ata_link_printk(link, KERN_WARNING,
|
|
+ "failed to reset engine (errno=%d)\n", rc);
|
|
+
|
|
+ ata_tf_init(link->device, &tf);
|
|
+
|
|
+ /* issue the first D2H Register FIS */
|
|
+ msecs = 0;
|
|
+ now = jiffies;
|
|
+ if (time_after(now, deadline))
|
|
+ msecs = jiffies_to_msecs(deadline - now);
|
|
+
|
|
+ tf.ctl |= ATA_SRST;
|
|
+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
|
|
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
|
|
+ rc = -EIO;
|
|
+ reason = "1st FIS failed";
|
|
+ goto fail;
|
|
+ }
|
|
+
|
|
+ /* spec says at least 5us, but be generous and sleep for 1ms */
|
|
+ msleep(1);
|
|
+
|
|
+ /* issue the second D2H Register FIS */
|
|
+ tf.ctl &= ~ATA_SRST;
|
|
+ ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
|
|
+
|
|
+ /* wait for link to become ready */
|
|
+ rc = ata_wait_after_reset(link, deadline, check_ready);
|
|
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
|
|
+ /*
|
|
+ * Workaround for cases where link online status can't
|
|
+ * be trusted. Treat device readiness timeout as link
|
|
+ * offline.
|
|
+ */
|
|
+ ata_link_printk(link, KERN_INFO,
|
|
+ "device not ready, treating as offline\n");
|
|
+ *class = ATA_DEV_NONE;
|
|
+ } else if (rc) {
|
|
+ /* link occupied, -ENODEV too is an error */
|
|
+ reason = "device not ready";
|
|
+ goto fail;
|
|
+ } else
|
|
+ *class = ahci_dev_classify(ap);
|
|
+
|
|
+ DPRINTK("EXIT, class=%u\n", *class);
|
|
+ return 0;
|
|
+
|
|
+ fail:
|
|
+ ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int ahci_check_ready(struct ata_link *link)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
+
|
|
+ return ata_check_ready(status);
|
|
+}
|
|
+
|
|
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline)
|
|
+{
|
|
+ int pmp = sata_srst_pmp(link);
|
|
+
|
|
+ DPRINTK("ENTER\n");
|
|
+
|
|
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
|
|
+}
|
|
+
|
|
+static int ahci_sb600_check_ready(struct ata_link *link)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
|
|
+
|
|
+ /*
|
|
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
|
|
+ * which can save timeout delay.
|
|
+ */
|
|
+ if (irq_status & PORT_IRQ_BAD_PMP)
|
|
+ return -EIO;
|
|
+
|
|
+ return ata_check_ready(status);
|
|
+}
|
|
+
|
|
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ int pmp = sata_srst_pmp(link);
|
|
+ int rc;
|
|
+ u32 irq_sts;
|
|
+
|
|
+ DPRINTK("ENTER\n");
|
|
+
|
|
+ rc = ahci_do_softreset(link, class, pmp, deadline,
|
|
+ ahci_sb600_check_ready);
|
|
+
|
|
+ /*
|
|
+ * Soft reset fails on some ATI chips with IPMS set when PMP
|
|
+ * is enabled but SATA HDD/ODD is connected to SATA port,
|
|
+ * do soft reset again to port 0.
|
|
+ */
|
|
+ if (rc == -EIO) {
|
|
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
|
|
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
|
|
+ ata_link_printk(link, KERN_WARNING,
|
|
+ "applying SB600 PMP SRST workaround "
|
|
+ "and retrying\n");
|
|
+ rc = ahci_do_softreset(link, class, 0, deadline,
|
|
+ ahci_check_ready);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline)
|
|
+{
|
|
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
+ struct ata_taskfile tf;
|
|
+ bool online;
|
|
+ int rc;
|
|
+
|
|
+ DPRINTK("ENTER\n");
|
|
+
|
|
+ ahci_stop_engine(ap);
|
|
+
|
|
+ /* clear D2H reception area to properly wait for D2H FIS */
|
|
+ ata_tf_init(link->device, &tf);
|
|
+ tf.command = 0x80;
|
|
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
+
|
|
+ rc = sata_link_hardreset(link, timing, deadline, &online,
|
|
+ ahci_check_ready);
|
|
+
|
|
+ ahci_start_engine(ap);
|
|
+
|
|
+ if (online)
|
|
+ *class = ahci_dev_classify(ap);
|
|
+
|
|
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ bool online;
|
|
+ int rc;
|
|
+
|
|
+ DPRINTK("ENTER\n");
|
|
+
|
|
+ ahci_stop_engine(ap);
|
|
+
|
|
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
+ deadline, &online, NULL);
|
|
+
|
|
+ ahci_start_engine(ap);
|
|
+
|
|
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
+
|
|
+ /* vt8251 doesn't clear BSY on signature FIS reception,
|
|
+ * request follow-up softreset.
|
|
+ */
|
|
+ return online ? -EAGAIN : rc;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
|
|
+ unsigned long deadline)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
+ struct ata_taskfile tf;
|
|
+ bool online;
|
|
+ int rc;
|
|
+
|
|
+ ahci_stop_engine(ap);
|
|
+
|
|
+ /* clear D2H reception area to properly wait for D2H FIS */
|
|
+ ata_tf_init(link->device, &tf);
|
|
+ tf.command = 0x80;
|
|
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
+
|
|
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
+ deadline, &online, NULL);
|
|
+
|
|
+ ahci_start_engine(ap);
|
|
+
|
|
+ /* The pseudo configuration device on SIMG4726 attached to
|
|
+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
|
|
+ * hardreset if no device is attached to the first downstream
|
|
+ * port && the pseudo device locks up on SRST w/ PMP==0. To
|
|
+ * work around this, wait for !BSY only briefly. If BSY isn't
|
|
+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
|
|
+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
|
|
+ *
|
|
+ * Wait for two seconds. Devices attached to downstream port
|
|
+ * which can't process the following IDENTIFY after this will
|
|
+ * have to be reset again. For most cases, this should
|
|
+ * suffice while making probing snappish enough.
|
|
+ */
|
|
+ if (online) {
|
|
+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
|
|
+ ahci_check_ready);
|
|
+ if (rc)
|
|
+ ahci_kick_engine(ap, 0);
|
|
+ }
|
|
+ return rc;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void ahci_postreset(struct ata_link *link, unsigned int *class)
|
|
+{
|
|
+ struct ata_port *ap = link->ap;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 new_tmp, tmp;
|
|
+
|
|
+ ata_std_postreset(link, class);
|
|
+
|
|
+ /* Make sure port's ATAPI bit is set appropriately */
|
|
+ new_tmp = tmp = readl(port_mmio + PORT_CMD);
|
|
+ if (*class == ATA_DEV_ATAPI)
|
|
+ new_tmp |= PORT_CMD_ATAPI;
|
|
+ else
|
|
+ new_tmp &= ~PORT_CMD_ATAPI;
|
|
+ if (new_tmp != tmp) {
|
|
+ writel(new_tmp, port_mmio + PORT_CMD);
|
|
+ readl(port_mmio + PORT_CMD); /* flush */
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
|
|
+{
|
|
+ struct scatterlist *sg;
|
|
+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
|
|
+ unsigned int si;
|
|
+
|
|
+ VPRINTK("ENTER\n");
|
|
+
|
|
+ /*
|
|
+ * Next, the S/G list.
|
|
+ */
|
|
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
+ dma_addr_t addr = sg_dma_address(sg);
|
|
+ u32 sg_len = sg_dma_len(sg);
|
|
+
|
|
+#if 0
|
|
+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
|
|
+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
|
|
+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
|
|
+#else
|
|
+ ahci_sg[si].addr = addr & 0xffffffff;
|
|
+ ahci_sg[si].addr_hi = (addr >> 16) >> 16;
|
|
+ ahci_sg[si].flags_size = sg_len - 1;
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ return si;
|
|
+}
|
|
+
|
|
+static void ahci_qc_prep(struct ata_queued_cmd *qc)
|
|
+{
|
|
+ struct ata_port *ap = qc->ap;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
|
|
+ void *cmd_tbl;
|
|
+ u32 opts;
|
|
+ const u32 cmd_fis_len = 5; /* five dwords */
|
|
+ unsigned int n_elem;
|
|
+
|
|
+ /*
|
|
+ * Fill in command table information. First, the header,
|
|
+ * a SATA Register - Host to Device command FIS.
|
|
+ */
|
|
+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
|
|
+
|
|
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
|
|
+ if (is_atapi) {
|
|
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
|
|
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
|
|
+ }
|
|
+
|
|
+ n_elem = 0;
|
|
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
+ n_elem = ahci_fill_sg(qc, cmd_tbl);
|
|
+
|
|
+ /*
|
|
+ * Fill in command slot information.
|
|
+ */
|
|
+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
|
|
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
+ opts |= AHCI_CMD_WRITE;
|
|
+ if (is_atapi)
|
|
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
|
|
+
|
|
+ ahci_fill_cmd_slot(pp, qc->tag, opts);
|
|
+}
|
|
+
|
|
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ata_eh_info *host_ehi = &ap->link.eh_info;
|
|
+ struct ata_link *link = NULL;
|
|
+ struct ata_queued_cmd *active_qc;
|
|
+ struct ata_eh_info *active_ehi;
|
|
+ u32 serror;
|
|
+
|
|
+ /* determine active link */
|
|
+ ata_for_each_link(link, ap, EDGE)
|
|
+ if (ata_link_active(link))
|
|
+ break;
|
|
+ if (!link)
|
|
+ link = &ap->link;
|
|
+
|
|
+ active_qc = ata_qc_from_tag(ap, link->active_tag);
|
|
+ active_ehi = &link->eh_info;
|
|
+
|
|
+ /* record irq stat */
|
|
+ ata_ehi_clear_desc(host_ehi);
|
|
+ ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
|
|
+
|
|
+ /* AHCI needs SError cleared; otherwise, it might lock up */
|
|
+ ahci_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
+ ahci_scr_write(&ap->link, SCR_ERROR, serror);
|
|
+ host_ehi->serror |= serror;
|
|
+
|
|
+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
|
|
+ if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
|
|
+ irq_stat &= ~PORT_IRQ_IF_ERR;
|
|
+
|
|
+ if (irq_stat & PORT_IRQ_TF_ERR) {
|
|
+ /* If qc is active, charge it; otherwise, the active
|
|
+ * link. There's no active qc on NCQ errors. It will
|
|
+ * be determined by EH by reading log page 10h.
|
|
+ */
|
|
+ if (active_qc)
|
|
+ active_qc->err_mask |= AC_ERR_DEV;
|
|
+ else
|
|
+ active_ehi->err_mask |= AC_ERR_DEV;
|
|
+
|
|
+ if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
|
|
+ host_ehi->serror &= ~SERR_INTERNAL;
|
|
+ }
|
|
+
|
|
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
+ u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
|
|
+
|
|
+ active_ehi->err_mask |= AC_ERR_HSM;
|
|
+ active_ehi->action |= ATA_EH_RESET;
|
|
+ ata_ehi_push_desc(active_ehi,
|
|
+ "unknown FIS %08x %08x %08x %08x" ,
|
|
+ unk[0], unk[1], unk[2], unk[3]);
|
|
+ }
|
|
+
|
|
+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
|
|
+ active_ehi->err_mask |= AC_ERR_HSM;
|
|
+ active_ehi->action |= ATA_EH_RESET;
|
|
+ ata_ehi_push_desc(active_ehi, "incorrect PMP");
|
|
+ }
|
|
+
|
|
+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
|
|
+ host_ehi->err_mask |= AC_ERR_HOST_BUS;
|
|
+ host_ehi->action |= ATA_EH_RESET;
|
|
+ ata_ehi_push_desc(host_ehi, "host bus error");
|
|
+ }
|
|
+
|
|
+ if (irq_stat & PORT_IRQ_IF_ERR) {
|
|
+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
|
|
+ host_ehi->action |= ATA_EH_RESET;
|
|
+ ata_ehi_push_desc(host_ehi, "interface fatal error");
|
|
+ }
|
|
+
|
|
+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
|
|
+ ata_ehi_hotplugged(host_ehi);
|
|
+ ata_ehi_push_desc(host_ehi, "%s",
|
|
+ irq_stat & PORT_IRQ_CONNECT ?
|
|
+ "connection status changed" : "PHY RDY changed");
|
|
+ }
|
|
+
|
|
+ /* okay, let's hand over to EH */
|
|
+
|
|
+ if (irq_stat & PORT_IRQ_FREEZE)
|
|
+ ata_port_freeze(ap);
|
|
+ else
|
|
+ ata_port_abort(ap);
|
|
+}
|
|
+
|
|
+static void ahci_port_intr(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
|
|
+ u32 status, qc_active;
|
|
+ int rc;
|
|
+
|
|
+ status = readl(port_mmio + PORT_IRQ_STAT);
|
|
+ writel(status, port_mmio + PORT_IRQ_STAT);
|
|
+
|
|
+ /* ignore BAD_PMP while resetting */
|
|
+ if (unlikely(resetting))
|
|
+ status &= ~PORT_IRQ_BAD_PMP;
|
|
+
|
|
+ /* If we are getting PhyRdy, this is
|
|
+ * just a power state change, we should
|
|
+ * clear out this, plus the PhyRdy/Comm
|
|
+ * Wake bits from Serror
|
|
+ */
|
|
+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
|
|
+ (status & PORT_IRQ_PHYRDY)) {
|
|
+ status &= ~PORT_IRQ_PHYRDY;
|
|
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
+ }
|
|
+
|
|
+ if (unlikely(status & PORT_IRQ_ERROR)) {
|
|
+ ahci_error_intr(ap, status);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ if (status & PORT_IRQ_SDB_FIS) {
|
|
+ /* If SNotification is available, leave notification
|
|
+ * handling to sata_async_notification(). If not,
|
|
+ * emulate it by snooping SDB FIS RX area.
|
|
+ *
|
|
+ * Snooping FIS RX area is probably cheaper than
|
|
+ * poking SNotification but some constrollers which
|
|
+ * implement SNotification, ICH9 for example, don't
|
|
+ * store AN SDB FIS into receive area.
|
|
+ */
|
|
+ if (hpriv->cap & HOST_CAP_SNTF)
|
|
+ sata_async_notification(ap);
|
|
+ else {
|
|
+ /* If the 'N' bit in word 0 of the FIS is set,
|
|
+ * we just received asynchronous notification.
|
|
+ * Tell libata about it.
|
|
+ */
|
|
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
|
|
+#if 0
|
|
+ u32 f0 = le32_to_cpu(f[0]);
|
|
+#else
|
|
+ u32 f0 = f[0];
|
|
+#endif
|
|
+
|
|
+ if (f0 & (1 << 15))
|
|
+ sata_async_notification(ap);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* pp->active_link is valid iff any command is in flight */
|
|
+ if (ap->qc_active && pp->active_link->sactive)
|
|
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
|
|
+ else
|
|
+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
|
|
+
|
|
+ rc = ata_qc_complete_multiple(ap, qc_active);
|
|
+
|
|
+ /* while resetting, invalid completions are expected */
|
|
+ if (unlikely(rc < 0 && !resetting)) {
|
|
+ ehi->err_mask |= AC_ERR_HSM;
|
|
+ ehi->action |= ATA_EH_RESET;
|
|
+ ata_port_freeze(ap);
|
|
+ }
|
|
+}
|
|
+
|
|
+static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
|
|
+{
|
|
+ struct ata_host *host = dev_instance;
|
|
+ struct ahci_host_priv *hpriv;
|
|
+ unsigned int i, handled = 0;
|
|
+ void __iomem *mmio;
|
|
+ u32 irq_stat, irq_masked;
|
|
+
|
|
+ VPRINTK("ENTER\n");
|
|
+
|
|
+ hpriv = host->private_data;
|
|
+#if 0
|
|
+ mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+
|
|
+ /* sigh. 0xffffffff is a valid return from h/w */
|
|
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
|
|
+ if (!irq_stat)
|
|
+ return IRQ_NONE;
|
|
+
|
|
+ irq_masked = irq_stat & hpriv->port_map;
|
|
+
|
|
+ spin_lock(&host->lock);
|
|
+
|
|
+ for (i = 0; i < host->n_ports; i++) {
|
|
+ struct ata_port *ap;
|
|
+
|
|
+ if (!(irq_masked & (1 << i)))
|
|
+ continue;
|
|
+
|
|
+ ap = host->ports[i];
|
|
+ if (ap) {
|
|
+ ahci_port_intr(ap);
|
|
+ VPRINTK("port %u\n", i);
|
|
+ } else {
|
|
+ VPRINTK("port %u (no irq)\n", i);
|
|
+ if (ata_ratelimit())
|
|
+ dev_printk(KERN_WARNING, host->dev,
|
|
+ "interrupt on disabled port %u\n", i);
|
|
+ }
|
|
+
|
|
+ handled = 1;
|
|
+ }
|
|
+
|
|
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
|
|
+ * it should be cleared after all the port events are cleared;
|
|
+ * otherwise, it will raise a spurious interrupt after each
|
|
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
|
|
+ * information.
|
|
+ *
|
|
+ * Also, use the unmasked value to clear interrupt as spurious
|
|
+ * pending event on a dummy port might cause screaming IRQ.
|
|
+ */
|
|
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
|
|
+
|
|
+ spin_unlock(&host->lock);
|
|
+
|
|
+ VPRINTK("EXIT\n");
|
|
+
|
|
+ return IRQ_RETVAL(handled);
|
|
+}
|
|
+
|
|
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
|
|
+{
|
|
+ struct ata_port *ap = qc->ap;
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+
|
|
+ /* Keep track of the currently active link. It will be used
|
|
+ * in completion path to determine whether NCQ phase is in
|
|
+ * progress.
|
|
+ */
|
|
+ pp->active_link = qc->dev->link;
|
|
+
|
|
+ if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
|
|
+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
|
|
+
|
|
+ ahci_sw_activity(qc->dev->link);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
|
|
+{
|
|
+ struct ahci_port_priv *pp = qc->ap->private_data;
|
|
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
+
|
|
+ ata_tf_from_fis(d2h_fis, &qc->result_tf);
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static void ahci_freeze(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+
|
|
+ /* turn IRQ off */
|
|
+ writel(0, port_mmio + PORT_IRQ_MASK);
|
|
+}
|
|
+
|
|
+static void ahci_thaw(struct ata_port *ap)
|
|
+{
|
|
+#if 0
|
|
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ u32 tmp;
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+
|
|
+ /* clear IRQ */
|
|
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
|
|
+
|
|
+ /* turn IRQ back on */
|
|
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
+}
|
|
+
|
|
+static void ahci_error_handler(struct ata_port *ap)
|
|
+{
|
|
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
+ /* restart engine */
|
|
+ ahci_stop_engine(ap);
|
|
+ ahci_start_engine(ap);
|
|
+ }
|
|
+
|
|
+ sata_pmp_error_handler(ap);
|
|
+}
|
|
+
|
|
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
+{
|
|
+ struct ata_port *ap = qc->ap;
|
|
+
|
|
+ /* make DMA engine forget about the failed command */
|
|
+ if (qc->flags & ATA_QCFLAG_FAILED)
|
|
+ ahci_kick_engine(ap, 1);
|
|
+}
|
|
+
|
|
+static void ahci_pmp_attach(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u32 cmd;
|
|
+
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+ cmd |= PORT_CMD_PMP;
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+
|
|
+ pp->intr_mask |= PORT_IRQ_BAD_PMP;
|
|
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
+}
|
|
+
|
|
+static void ahci_pmp_detach(struct ata_port *ap)
|
|
+{
|
|
+ void __iomem *port_mmio = ahci_port_base(ap);
|
|
+ struct ahci_port_priv *pp = ap->private_data;
|
|
+ u32 cmd;
|
|
+
|
|
+ cmd = readl(port_mmio + PORT_CMD);
|
|
+ cmd &= ~PORT_CMD_PMP;
|
|
+ writel(cmd, port_mmio + PORT_CMD);
|
|
+
|
|
+ pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
|
|
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
+}
|
|
+
|
|
+static int ahci_port_resume(struct ata_port *ap)
|
|
+{
|
|
+ ahci_power_up(ap);
|
|
+ ahci_start_port(ap);
|
|
+
|
|
+ if (sata_pmp_attached(ap))
|
|
+ ahci_pmp_attach(ap);
|
|
+ else
|
|
+ ahci_pmp_detach(ap);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
+{
|
|
+ const char *emsg = NULL;
|
|
+ int rc;
|
|
+
|
|
+ rc = ahci_deinit_port(ap, &emsg);
|
|
+ if (rc == 0)
|
|
+ ahci_power_down(ap);
|
|
+ else {
|
|
+ ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
|
|
+ ahci_start_port(ap);
|
|
+ }
|
|
+
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
+{
|
|
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
+ struct ahci_host_priv *hpriv = host->private_data;
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+ u32 ctl;
|
|
+
|
|
+ if (mesg.event & PM_EVENT_SUSPEND &&
|
|
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "BIOS update required for suspend/resume\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ if (mesg.event & PM_EVENT_SLEEP) {
|
|
+ /* AHCI spec rev1.1 section 8.3.3:
|
|
+ * Software must disable interrupts prior to requesting a
|
|
+ * transition of the HBA to D3 state.
|
|
+ */
|
|
+ ctl = readl(mmio + HOST_CTL);
|
|
+ ctl &= ~HOST_IRQ_EN;
|
|
+ writel(ctl, mmio + HOST_CTL);
|
|
+ readl(mmio + HOST_CTL); /* flush */
|
|
+ }
|
|
+
|
|
+ return ata_pci_device_suspend(pdev, mesg);
|
|
+}
|
|
+
|
|
+static int ahci_pci_device_resume(struct pci_dev *pdev)
|
|
+{
|
|
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
+ int rc;
|
|
+
|
|
+ rc = ata_pci_device_do_resume(pdev);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+
|
|
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
+ rc = ahci_reset_controller(host);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+
|
|
+ ahci_init_controller(host);
|
|
+ }
|
|
+
|
|
+ ata_host_resume(host);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static int ahci_port_start(struct ata_port *ap)
|
|
+{
|
|
+ struct device *dev = ap->host->dev;
|
|
+ struct ahci_port_priv *pp;
|
|
+ void *mem;
|
|
+ dma_addr_t mem_dma;
|
|
+
|
|
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
+ if (!pp)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
|
|
+ GFP_KERNEL);
|
|
+ if (!mem)
|
|
+ return -ENOMEM;
|
|
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
|
|
+
|
|
+ /*
|
|
+ * First item in chunk of DMA memory: 32-slot command table,
|
|
+ * 32 bytes each in size
|
|
+ */
|
|
+ pp->cmd_slot = mem;
|
|
+ pp->cmd_slot_dma = mem_dma;
|
|
+
|
|
+ mem += AHCI_CMD_SLOT_SZ;
|
|
+ mem_dma += AHCI_CMD_SLOT_SZ;
|
|
+
|
|
+ /*
|
|
+ * Second item: Received-FIS area
|
|
+ */
|
|
+ pp->rx_fis = mem;
|
|
+ pp->rx_fis_dma = mem_dma;
|
|
+
|
|
+ mem += AHCI_RX_FIS_SZ;
|
|
+ mem_dma += AHCI_RX_FIS_SZ;
|
|
+
|
|
+ /*
|
|
+ * Third item: data area for storing a single command
|
|
+ * and its scatter-gather table
|
|
+ */
|
|
+ pp->cmd_tbl = mem;
|
|
+ pp->cmd_tbl_dma = mem_dma;
|
|
+
|
|
+ /*
|
|
+ * Save off initial list of interrupts to be enabled.
|
|
+ * This could be changed later
|
|
+ */
|
|
+ pp->intr_mask = DEF_PORT_IRQ;
|
|
+
|
|
+ ap->private_data = pp;
|
|
+
|
|
+ /* engage engines, captain */
|
|
+ return ahci_port_resume(ap);
|
|
+}
|
|
+
|
|
+static void ahci_port_stop(struct ata_port *ap)
|
|
+{
|
|
+ const char *emsg = NULL;
|
|
+ int rc;
|
|
+
|
|
+ /* de-initialize port */
|
|
+ rc = ahci_deinit_port(ap, &emsg);
|
|
+ if (rc)
|
|
+ ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
|
|
+}
|
|
+
|
|
+#if 0
|
|
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
|
|
+{
|
|
+ int rc;
|
|
+
|
|
+ if (using_dac &&
|
|
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
+ if (rc) {
|
|
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
+ if (rc) {
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "64-bit DMA enable failed\n");
|
|
+ return rc;
|
|
+ }
|
|
+ }
|
|
+ } else {
|
|
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
+ if (rc) {
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "32-bit DMA enable failed\n");
|
|
+ return rc;
|
|
+ }
|
|
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
+ if (rc) {
|
|
+ dev_printk(KERN_ERR, &pdev->dev,
|
|
+ "32-bit consistent DMA enable failed\n");
|
|
+ return rc;
|
|
+ }
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void ahci_print_info(struct ata_host *host)
|
|
+{
|
|
+ struct ahci_host_priv *hpriv = host->private_data;
|
|
+#if 0
|
|
+ struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
+#else
|
|
+ struct platform_device *pdev = to_platform_device(host->dev);
|
|
+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
|
|
+#endif
|
|
+ u32 vers, cap, impl, speed;
|
|
+ const char *speed_s;
|
|
+#if 0
|
|
+ u16 cc;
|
|
+#endif
|
|
+ const char *scc_s;
|
|
+
|
|
+ vers = readl(mmio + HOST_VERSION);
|
|
+ cap = hpriv->cap;
|
|
+ impl = hpriv->port_map;
|
|
+
|
|
+ speed = (cap >> 20) & 0xf;
|
|
+ if (speed == 1)
|
|
+ speed_s = "1.5";
|
|
+ else if (speed == 2)
|
|
+ speed_s = "3";
|
|
+ else if (speed == 3)
|
|
+ speed_s = "6";
|
|
+ else
|
|
+ speed_s = "?";
|
|
+
|
|
+#if 0
|
|
+ pci_read_config_word(pdev, 0x0a, &cc);
|
|
+ if (cc == PCI_CLASS_STORAGE_IDE)
|
|
+ scc_s = "IDE";
|
|
+ else if (cc == PCI_CLASS_STORAGE_SATA)
|
|
+ scc_s = "SATA";
|
|
+ else if (cc == PCI_CLASS_STORAGE_RAID)
|
|
+ scc_s = "RAID";
|
|
+ else
|
|
+ scc_s = "unknown";
|
|
+#else
|
|
+ scc_s = "SATA";
|
|
+#endif
|
|
+
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "AHCI %02x%02x.%02x%02x "
|
|
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
|
|
+ ,
|
|
+
|
|
+ (vers >> 24) & 0xff,
|
|
+ (vers >> 16) & 0xff,
|
|
+ (vers >> 8) & 0xff,
|
|
+ vers & 0xff,
|
|
+
|
|
+ ((cap >> 8) & 0x1f) + 1,
|
|
+ (cap & 0x1f) + 1,
|
|
+ speed_s,
|
|
+ impl,
|
|
+ scc_s);
|
|
+
|
|
+ dev_printk(KERN_INFO, &pdev->dev,
|
|
+ "flags: "
|
|
+ "%s%s%s%s%s%s%s"
|
|
+ "%s%s%s%s%s%s%s"
|
|
+ "%s\n"
|
|
+ ,
|
|
+
|
|
+ cap & (1 << 31) ? "64bit " : "",
|
|
+ cap & (1 << 30) ? "ncq " : "",
|
|
+ cap & (1 << 29) ? "sntf " : "",
|
|
+ cap & (1 << 28) ? "ilck " : "",
|
|
+ cap & (1 << 27) ? "stag " : "",
|
|
+ cap & (1 << 26) ? "pm " : "",
|
|
+ cap & (1 << 25) ? "led " : "",
|
|
+
|
|
+ cap & (1 << 24) ? "clo " : "",
|
|
+ cap & (1 << 19) ? "nz " : "",
|
|
+ cap & (1 << 18) ? "only " : "",
|
|
+ cap & (1 << 17) ? "pmp " : "",
|
|
+ cap & (1 << 15) ? "pio " : "",
|
|
+ cap & (1 << 14) ? "slum " : "",
|
|
+ cap & (1 << 13) ? "part " : "",
|
|
+ cap & (1 << 6) ? "ems ": ""
|
|
+ );
|
|
+}
|
|
+
|
|
+#if 0
|
|
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
|
|
+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
|
|
+ * support PMP and the 4726 either directly exports the device
|
|
+ * attached to the first downstream port or acts as a hardware storage
|
|
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
|
|
+ * other configuration).
|
|
+ *
|
|
+ * When there's no device attached to the first downstream port of the
|
|
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
|
|
+ * configure the 4726. However, ATA emulation of the device is very
|
|
+ * lame. It doesn't send signature D2H Reg FIS after the initial
|
|
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
|
|
+ *
|
|
+ * The following function works around the problem by always using
|
|
+ * hardreset on the port and not depending on receiving signature FIS
|
|
+ * afterward. If signature FIS isn't received soon, ATA class is
|
|
+ * assumed without follow-up softreset.
|
|
+ */
|
|
+static void ahci_p5wdh_workaround(struct ata_host *host)
|
|
+{
|
|
+ static struct dmi_system_id sysids[] = {
|
|
+ {
|
|
+ .ident = "P5W DH Deluxe",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR,
|
|
+ "ASUSTEK COMPUTER INC"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
|
|
+ },
|
|
+ },
|
|
+ { }
|
|
+ };
|
|
+ struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
+
|
|
+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
|
|
+ dmi_check_system(sysids)) {
|
|
+ struct ata_port *ap = host->ports[1];
|
|
+
|
|
+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
|
|
+ "Deluxe on-board SIMG4726 workaround\n");
|
|
+
|
|
+ ap->ops = &ahci_p5wdh_ops;
|
|
+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older
|
|
+ * BIOS. The oldest version known to be broken is 0901 and working is
|
|
+ * 1501 which was released on 2007-10-26. Force 32bit DMA on anything
|
|
+ * older than 1501. Please read bko#9412 for more info.
|
|
+ */
|
|
+static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev)
|
|
+{
|
|
+ static const struct dmi_system_id sysids[] = {
|
|
+ {
|
|
+ .ident = "ASUS M2A-VM",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_BOARD_VENDOR,
|
|
+ "ASUSTeK Computer INC."),
|
|
+ DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
|
|
+ },
|
|
+ },
|
|
+ { }
|
|
+ };
|
|
+ const char *cutoff_mmdd = "10/26";
|
|
+ const char *date;
|
|
+ int year;
|
|
+
|
|
+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
|
|
+ !dmi_check_system(sysids))
|
|
+ return false;
|
|
+
|
|
+ /*
|
|
+ * Argh.... both version and date are free form strings.
|
|
+ * Let's hope they're using the same date format across
|
|
+ * different versions.
|
|
+ */
|
|
+ date = dmi_get_system_info(DMI_BIOS_DATE);
|
|
+ year = dmi_get_year(DMI_BIOS_DATE);
|
|
+ if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' &&
|
|
+ (year > 2007 ||
|
|
+ (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0)))
|
|
+ return false;
|
|
+
|
|
+ dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, "
|
|
+ "forcing 32bit DMA, update BIOS\n");
|
|
+
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
|
|
+{
|
|
+ static const struct dmi_system_id broken_systems[] = {
|
|
+ {
|
|
+ .ident = "HP Compaq nx6310",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
|
|
+ },
|
|
+ /* PCI slot number of the controller */
|
|
+ .driver_data = (void *)0x1FUL,
|
|
+ },
|
|
+ {
|
|
+ .ident = "HP Compaq 6720s",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
|
|
+ },
|
|
+ /* PCI slot number of the controller */
|
|
+ .driver_data = (void *)0x1FUL,
|
|
+ },
|
|
+
|
|
+ { } /* terminate list */
|
|
+ };
|
|
+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
|
|
+
|
|
+ if (dmi) {
|
|
+ unsigned long slot = (unsigned long)dmi->driver_data;
|
|
+ /* apply the quirk only to on-board controllers */
|
|
+ return slot == PCI_SLOT(pdev->devfn);
|
|
+ }
|
|
+
|
|
+ return false;
|
|
+}
|
|
+
|
|
+static bool ahci_broken_suspend(struct pci_dev *pdev)
|
|
+{
|
|
+ static const struct dmi_system_id sysids[] = {
|
|
+ /*
|
|
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
|
|
+ * to the harddisk doesn't become online after
|
|
+ * resuming from STR. Warn and fail suspend.
|
|
+ */
|
|
+ {
|
|
+ .ident = "dv4",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME,
|
|
+ "HP Pavilion dv4 Notebook PC"),
|
|
+ },
|
|
+ .driver_data = "F.30", /* cutoff BIOS version */
|
|
+ },
|
|
+ {
|
|
+ .ident = "dv5",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME,
|
|
+ "HP Pavilion dv5 Notebook PC"),
|
|
+ },
|
|
+ .driver_data = "F.16", /* cutoff BIOS version */
|
|
+ },
|
|
+ {
|
|
+ .ident = "dv6",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME,
|
|
+ "HP Pavilion dv6 Notebook PC"),
|
|
+ },
|
|
+ .driver_data = "F.21", /* cutoff BIOS version */
|
|
+ },
|
|
+ {
|
|
+ .ident = "HDX18",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
|
|
+ DMI_MATCH(DMI_PRODUCT_NAME,
|
|
+ "HP HDX18 Notebook PC"),
|
|
+ },
|
|
+ .driver_data = "F.23", /* cutoff BIOS version */
|
|
+ },
|
|
+ { } /* terminate list */
|
|
+ };
|
|
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
|
|
+ const char *ver;
|
|
+
|
|
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
|
|
+ return false;
|
|
+
|
|
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
|
|
+
|
|
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
|
|
+}
|
|
+
|
|
+static bool ahci_broken_online(struct pci_dev *pdev)
|
|
+{
|
|
+#define ENCODE_BUSDEVFN(bus, slot, func) \
|
|
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
|
|
+ static const struct dmi_system_id sysids[] = {
|
|
+ /*
|
|
+ * There are several gigabyte boards which use
|
|
+ * SIMG5723s configured as hardware RAID. Certain
|
|
+ * 5723 firmware revisions shipped there keep the link
|
|
+ * online but fail to answer properly to SRST or
|
|
+ * IDENTIFY when no device is attached downstream
|
|
+ * causing libata to retry quite a few times leading
|
|
+ * to excessive detection delay.
|
|
+ *
|
|
+ * As these firmwares respond to the second reset try
|
|
+ * with invalid device signature, considering unknown
|
|
+ * sig as offline works around the problem acceptably.
|
|
+ */
|
|
+ {
|
|
+ .ident = "EP45-DQ6",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_BOARD_VENDOR,
|
|
+ "Gigabyte Technology Co., Ltd."),
|
|
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
|
|
+ },
|
|
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
|
|
+ },
|
|
+ {
|
|
+ .ident = "EP45-DS5",
|
|
+ .matches = {
|
|
+ DMI_MATCH(DMI_BOARD_VENDOR,
|
|
+ "Gigabyte Technology Co., Ltd."),
|
|
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
|
|
+ },
|
|
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
|
|
+ },
|
|
+ { } /* terminate list */
|
|
+ };
|
|
+#undef ENCODE_BUSDEVFN
|
|
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
|
|
+ unsigned int val;
|
|
+
|
|
+ if (!dmi)
|
|
+ return false;
|
|
+
|
|
+ val = (unsigned long)dmi->driver_data;
|
|
+
|
|
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
|
|
+}
|
|
+
|
|
+#endif
|
|
+static int ahci_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct ata_host *host = dev_get_drvdata(dev);
|
|
+
|
|
+ ata_host_detach(host);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
+#else
|
|
+static int __init ahci_probe(struct platform_device *pdev)
|
|
+#endif
|
|
+{
|
|
+ static int printed_version;
|
|
+#if 0
|
|
+ unsigned int board_id = ent->driver_data;
|
|
+ struct ata_port_info pi = ahci_port_info[board_id];
|
|
+#else
|
|
+ struct ata_port_info pi = ahci_port_info[board_ahci];
|
|
+#endif
|
|
+ const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct ahci_host_priv *hpriv;
|
|
+ struct ata_host *host;
|
|
+ int n_ports, i, rc;
|
|
+ struct resource *res;
|
|
+ u8 *base = NULL;
|
|
+
|
|
+ VPRINTK("ENTER\n");
|
|
+
|
|
+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
|
|
+
|
|
+ if (!printed_version++)
|
|
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
+
|
|
+#if 0
|
|
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
|
|
+ can drive them all so if both drivers are selected make sure
|
|
+ AHCI stays out of the way */
|
|
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* acquire resources */
|
|
+ rc = pcim_enable_device(pdev);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+
|
|
+ /* AHCI controllers often implement SFF compatible interface.
|
|
+ * Grab all PCI BARs just in case.
|
|
+ */
|
|
+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
|
|
+ if (rc == -EBUSY)
|
|
+ pcim_pin_device(pdev);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+
|
|
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
|
|
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
|
|
+ u8 map;
|
|
+
|
|
+ /* ICH6s share the same PCI ID for both piix and ahci
|
|
+ * modes. Enabling ahci mode while MAP indicates
|
|
+ * combined mode is a bad idea. Yield to ata_piix.
|
|
+ */
|
|
+ pci_read_config_byte(pdev, ICH_MAP, &map);
|
|
+ if (map & 0x3) {
|
|
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
|
|
+ "combined mode, can't enable AHCI mode\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
|
|
+ if (!hpriv)
|
|
+ return -ENOMEM;
|
|
+ hpriv->flags |= (unsigned long)pi.private_data;
|
|
+
|
|
+#if 0
|
|
+ /* MCP65 revision A1 and A2 can't do MSI */
|
|
+ if (board_id == board_ahci_mcp65 &&
|
|
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
|
|
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
|
|
+
|
|
+ /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
|
|
+ if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
|
|
+ hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
|
|
+
|
|
+ /* apply ASUS M2A_VM quirk */
|
|
+ if (ahci_asus_m2a_vm_32bit_only(pdev))
|
|
+ hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
|
|
+
|
|
+ if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
|
|
+ pci_enable_msi(pdev);
|
|
+#endif
|
|
+
|
|
+ /* Cavium CNS3XXX Initial */
|
|
+ /* Get SATA register base address */
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res) {
|
|
+ dev_err(&pdev->dev, "no reg addr\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* ioremap SATA registers */
|
|
+ base = devm_ioremap(&pdev->dev, res->start, res->end - res->start + 1);
|
|
+
|
|
+ if (!base) {
|
|
+ dev_err(&pdev->dev, "ioremap failed for 0x%x\n", res->start);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+#if 0
|
|
+ /* reset PHY test chip */
|
|
+ printk("*** Reset PHY ***\n");
|
|
+ CNS3XXX_MISC_REGISTER |= 0xF;
|
|
+ mdelay(100);
|
|
+
|
|
+ printk("%s %d, base:0x%x\n",__FUNCTION__,__LINE__,(u32)base);
|
|
+
|
|
+ /* set PI first */
|
|
+ printk("*** Manually set PI ***\n");
|
|
+ writel(0x1, (void __iomem *)base + HOST_PORTS_IMPL);
|
|
+ printk("*** Now PI is: 0x%x ***\n",readl((void __iomem *)base + HOST_PORTS_IMPL));
|
|
+#endif
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+ /* save initial config */
|
|
+#if 0
|
|
+ ahci_save_initial_config(pdev, hpriv);
|
|
+#else
|
|
+ ahci_save_initial_config(pdev, hpriv, base);
|
|
+#endif
|
|
+
|
|
+ /* prepare host */
|
|
+ if (hpriv->cap & HOST_CAP_NCQ)
|
|
+ pi.flags |= ATA_FLAG_NCQ;
|
|
+
|
|
+ if (hpriv->cap & HOST_CAP_PMP)
|
|
+ pi.flags |= ATA_FLAG_PMP;
|
|
+
|
|
+ if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
|
|
+ u8 messages;
|
|
+#if 0
|
|
+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
|
|
+#else
|
|
+ void __iomem *mmio = (void __iomem *)base;
|
|
+#endif
|
|
+ u32 em_loc = readl(mmio + HOST_EM_LOC);
|
|
+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
|
|
+
|
|
+ messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
|
|
+
|
|
+ /* we only support LED message type right now */
|
|
+ if ((messages & 0x01) && (ahci_em_messages == 1)) {
|
|
+ /* store em_loc */
|
|
+ hpriv->em_loc = ((em_loc >> 16) * 4);
|
|
+ pi.flags |= ATA_FLAG_EM;
|
|
+ if (!(em_ctl & EM_CTL_ALHD))
|
|
+ pi.flags |= ATA_FLAG_SW_ACTIVITY;
|
|
+ }
|
|
+ }
|
|
+
|
|
+#if 0
|
|
+ if (ahci_broken_system_poweroff(pdev)) {
|
|
+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
|
|
+ dev_info(&pdev->dev,
|
|
+ "quirky BIOS, skipping spindown on poweroff\n");
|
|
+ }
|
|
+
|
|
+ if (ahci_broken_suspend(pdev)) {
|
|
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
|
|
+ dev_printk(KERN_WARNING, &pdev->dev,
|
|
+ "BIOS update required for suspend/resume\n");
|
|
+ }
|
|
+
|
|
+ if (ahci_broken_online(pdev)) {
|
|
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
|
|
+ dev_info(&pdev->dev,
|
|
+ "online status unreliable, applying workaround\n");
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ /* CAP.NP sometimes indicate the index of the last enabled
|
|
+ * port, at other times, that of the last possible port, so
|
|
+ * determining the maximum port number requires looking at
|
|
+ * both CAP.NP and port_map.
|
|
+ */
|
|
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
|
|
+
|
|
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
+ if (!host)
|
|
+ return -ENOMEM;
|
|
+#if 0
|
|
+ host->iomap = pcim_iomap_table(pdev);
|
|
+#else
|
|
+ host->iomap = (void __iomem *)base;
|
|
+#endif
|
|
+ host->private_data = hpriv;
|
|
+
|
|
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
|
|
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
|
|
+ else
|
|
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
|
|
+
|
|
+ if (pi.flags & ATA_FLAG_EM)
|
|
+ ahci_reset_em(host);
|
|
+
|
|
+ for (i = 0; i < host->n_ports; i++) {
|
|
+ struct ata_port *ap = host->ports[i];
|
|
+
|
|
+#if 0
|
|
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
|
|
+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
|
|
+ 0x100 + ap->port_no * 0x80, "port");
|
|
+#else
|
|
+ ata_port_desc(ap, "%s %s%llu@0x%llx", "ahci bar", "m",
|
|
+ (long long)(res->end - res->start) + 1, (long long)res->start);
|
|
+ ata_port_desc(ap, "%s 0x%llx", "port",
|
|
+ (long long)res->start + 0x100 + ap->port_no * 0x80);
|
|
+#endif
|
|
+
|
|
+ /* set initial link pm policy */
|
|
+ ap->pm_policy = NOT_AVAILABLE;
|
|
+
|
|
+ /* set enclosure management message type */
|
|
+ if (ap->flags & ATA_FLAG_EM)
|
|
+ ap->em_message_type = ahci_em_messages;
|
|
+
|
|
+
|
|
+ /* disabled/not-implemented port */
|
|
+ if (!(hpriv->port_map & (1 << i)))
|
|
+ ap->ops = &ata_dummy_port_ops;
|
|
+ }
|
|
+
|
|
+#if 0
|
|
+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
|
|
+ ahci_p5wdh_workaround(host);
|
|
+
|
|
+ /* initialize adapter */
|
|
+ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+#endif
|
|
+
|
|
+ rc = ahci_reset_controller(host);
|
|
+ if (rc)
|
|
+ return rc;
|
|
+
|
|
+ ahci_init_controller(host);
|
|
+ ahci_print_info(host);
|
|
+
|
|
+#if 0
|
|
+ pci_set_master(pdev);
|
|
+#endif
|
|
+
|
|
+
|
|
+
|
|
+#if 0
|
|
+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
|
|
+ &ahci_sht);
|
|
+#else
|
|
+ /* Get SATA port interrupt number */
|
|
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
+ if (!res) {
|
|
+ dev_err(&pdev->dev, "no SATA irq\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ return ata_host_activate(host, res->start, ahci_interrupt, IRQF_SHARED,
|
|
+ &ahci_sht);
|
|
+
|
|
+
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
|
|
+static void ahci_phy_init(void){
|
|
+
|
|
+ u32 u32tmp;
|
|
+
|
|
+
|
|
+ u32tmp = MISC_SATA_POWER_MODE;
|
|
+ u32tmp |= 0x1<< 16; // Disable SATA PHY 0 from SLUMBER Mode
|
|
+ u32tmp |= 0x1<< 17; // Disable SATA PHY 1 from SLUMBER Mode
|
|
+ MISC_SATA_POWER_MODE = u32tmp;
|
|
+
|
|
+ /* Enable SATA PHY */
|
|
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
|
|
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
|
|
+
|
|
+ /* Enable SATA Clock */
|
|
+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
|
|
+
|
|
+ /* De-Asscer SATA Reset */
|
|
+ u32tmp = PM_SOFT_RST_REG;
|
|
+ u32tmp |= 0x1 << PM_SOFT_RST_REG_OFFST_SATA;
|
|
+ PM_SOFT_RST_REG = u32tmp;
|
|
+}
|
|
+#endif
|
|
+
|
|
+
|
|
+
|
|
+static int __init ahci_init(void)
|
|
+{
|
|
+#if 0
|
|
+ return pci_register_driver(&ahci_pci_driver);
|
|
+#else
|
|
+ printk("CNS3XXX AHCI SATA low-level driver\n");
|
|
+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
|
|
+ ahci_phy_init();
|
|
+#endif
|
|
+ return platform_driver_register(&ahci_driver);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void __exit ahci_exit(void)
|
|
+{
|
|
+#if 0
|
|
+ pci_unregister_driver(&ahci_pci_driver);
|
|
+#else
|
|
+ platform_driver_unregister(&ahci_driver);
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+MODULE_AUTHOR("Jeff Garzik");
|
|
+MODULE_DESCRIPTION("AHCI SATA low-level driver");
|
|
+MODULE_LICENSE("GPL");
|
|
+#if 0
|
|
+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
|
|
+#endif
|
|
+MODULE_VERSION(DRV_VERSION);
|
|
+
|
|
+module_init(ahci_init);
|
|
+module_exit(ahci_exit);
|
|
--- a/drivers/ata/Kconfig
|
|
+++ b/drivers/ata/Kconfig
|
|
@@ -47,6 +47,14 @@ config SATA_PMP
|
|
This option adds support for SATA Port Multipliers
|
|
(the SATA version of an ethernet hub, or SAS expander).
|
|
|
|
+config SATA_CNS3XXX_AHCI
|
|
+ tristate "Cavium CNS3XXX AHCI SATA support"
|
|
+ help
|
|
+ This option enables support for AHCI Serial ATA support for Cavium CNS3XXX.
|
|
+
|
|
+ If unsure, say N.
|
|
+
|
|
+
|
|
config SATA_AHCI
|
|
tristate "AHCI SATA support"
|
|
depends on PCI
|
|
--- a/drivers/ata/libata-scsi.c
|
|
+++ b/drivers/ata/libata-scsi.c
|
|
@@ -3096,12 +3096,22 @@ int ata_scsi_queuecmd(struct scsi_cmnd *
|
|
struct scsi_device *scsidev = cmd->device;
|
|
struct Scsi_Host *shost = scsidev->host;
|
|
int rc = 0;
|
|
-
|
|
+#ifdef CONFIG_SMP
|
|
+ u32 flags;
|
|
+ local_save_flags(flags);
|
|
+#endif
|
|
ap = ata_shost_to_port(shost);
|
|
|
|
spin_unlock(shost->host_lock);
|
|
+#ifndef CONFIG_SMP
|
|
spin_lock(ap->lock);
|
|
-
|
|
+#else
|
|
+ while(!spin_trylock(ap->lock)){
|
|
+ if(!irqs_disabled()) continue;
|
|
+ local_irq_enable();
|
|
+ local_irq_restore(flags);
|
|
+ }
|
|
+#endif
|
|
ata_scsi_dump_cdb(ap, cmd);
|
|
|
|
dev = ata_scsi_find_dev(ap, scsidev);
|
|
--- a/drivers/ata/libata-sff.c
|
|
+++ b/drivers/ata/libata-sff.c
|
|
@@ -893,6 +893,9 @@ static void ata_pio_sector(struct ata_qu
|
|
do_write);
|
|
}
|
|
|
|
+ if (!do_write)
|
|
+ flush_dcache_page(page);
|
|
+
|
|
qc->curbytes += qc->sect_size;
|
|
qc->cursg_ofs += qc->sect_size;
|
|
|
|
--- a/drivers/ata/Makefile
|
|
+++ b/drivers/ata/Makefile
|
|
@@ -1,6 +1,7 @@
|
|
|
|
obj-$(CONFIG_ATA) += libata.o
|
|
|
|
+obj-$(CONFIG_SATA_CNS3XXX_AHCI) += cns3xxx_ahci.o
|
|
obj-$(CONFIG_SATA_AHCI) += ahci.o
|
|
obj-$(CONFIG_SATA_SVW) += sata_svw.o
|
|
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
|