mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-20 07:09:41 +02:00
52696b5d81
* new mii bus code, mac0 and mac1 can use the mac0's miii bus from now on * swap eth0 & eth1 on RB433/450 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11995 3c298f89-4303-0410-b956-a3cf2f4a3e73
291 lines
6.3 KiB
C
291 lines
6.3 KiB
C
/*
|
|
* Atheros AR71xx built-in ethernet mac driver
|
|
*
|
|
* Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
*
|
|
* Based on Atheros' AG7100 driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "ag71xx.h"
|
|
|
|
#define PLL_SEC_CONFIG 0x18050004
|
|
#define PLL_ETH0_INT_CLOCK 0x18050010
|
|
#define PLL_ETH1_INT_CLOCK 0x18050014
|
|
#define PLL_ETH_EXT_CLOCK 0x18050018
|
|
|
|
#define ag71xx_pll_shift(_ag) (((_ag)->pdev->id) ? 19 : 17)
|
|
#define ag71xx_pll_offset(_ag) (((_ag)->pdev->id) ? PLL_ETH1_INT_CLOCK \
|
|
: PLL_ETH0_INT_CLOCK)
|
|
|
|
static void ag71xx_set_pll(struct ag71xx *ag, u32 pll_val)
|
|
{
|
|
void __iomem *pll_reg = ioremap_nocache(ag71xx_pll_offset(ag), 4);
|
|
void __iomem *pll_cfg = ioremap_nocache(PLL_SEC_CONFIG, 4);
|
|
u32 s;
|
|
u32 t;
|
|
|
|
s = ag71xx_pll_shift(ag);
|
|
|
|
t = __raw_readl(pll_cfg);
|
|
t &= ~(3 << s);
|
|
t |= (2 << s);
|
|
__raw_writel(t, pll_cfg);
|
|
udelay(100);
|
|
|
|
__raw_writel(pll_val, pll_reg);
|
|
|
|
t |= (3 << s);
|
|
__raw_writel(t, pll_cfg);
|
|
udelay(100);
|
|
|
|
t &= ~(3 << s);
|
|
__raw_writel(t, pll_cfg);
|
|
udelay(100);
|
|
DBG("%s: pll_reg %#x: %#x\n", ag->dev->name,
|
|
(unsigned int)pll_reg, __raw_readl(pll_reg));
|
|
|
|
iounmap(pll_cfg);
|
|
iounmap(pll_reg);
|
|
}
|
|
|
|
static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
|
|
{
|
|
switch (ag->speed) {
|
|
case SPEED_1000:
|
|
return "1000";
|
|
case SPEED_100:
|
|
return "100";
|
|
case SPEED_10:
|
|
return "10";
|
|
}
|
|
|
|
return "?";
|
|
}
|
|
|
|
#if 1
|
|
#define PLL_VAL_1000 0x00110000
|
|
#define PLL_VAL_100 0x00001099
|
|
#define PLL_VAL_10 0x00991099
|
|
#else
|
|
#define PLL_VAL_1000 0x01111000
|
|
#define PLL_VAL_100 0x09991000
|
|
#define PLL_VAL_10 0x09991999
|
|
#endif
|
|
|
|
static void ag71xx_phy_link_update(struct ag71xx *ag)
|
|
{
|
|
u32 cfg2;
|
|
u32 ifctl;
|
|
u32 pll;
|
|
u32 fifo5;
|
|
u32 mii_speed;
|
|
|
|
if (!ag->link) {
|
|
netif_carrier_off(ag->dev);
|
|
printk(KERN_INFO "%s: link down\n", ag->dev->name);
|
|
return;
|
|
}
|
|
|
|
cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
|
|
cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
|
|
cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
|
|
|
|
ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
|
|
ifctl &= ~(MAC_IFCTL_SPEED);
|
|
|
|
fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
|
|
fifo5 &= ~FIFO_CFG5_BYTE_PER_CLK;
|
|
|
|
switch (ag->speed) {
|
|
case SPEED_1000:
|
|
mii_speed = MII_CTRL_SPEED_1000;
|
|
cfg2 |= MAC_CFG2_IF_1000;
|
|
pll = PLL_VAL_1000;
|
|
fifo5 |= FIFO_CFG5_BYTE_PER_CLK;
|
|
break;
|
|
case SPEED_100:
|
|
mii_speed = MII_CTRL_SPEED_100;
|
|
cfg2 |= MAC_CFG2_IF_10_100;
|
|
ifctl |= MAC_IFCTL_SPEED;
|
|
pll = PLL_VAL_100;
|
|
break;
|
|
case SPEED_10:
|
|
mii_speed = MII_CTRL_SPEED_10;
|
|
cfg2 |= MAC_CFG2_IF_10_100;
|
|
pll = PLL_VAL_10;
|
|
break;
|
|
default:
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
|
|
ag71xx_set_pll(ag, pll);
|
|
ag71xx_mii_ctrl_set_speed(ag, mii_speed);
|
|
|
|
ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
|
|
ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
|
|
ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
|
|
|
|
netif_carrier_on(ag->dev);
|
|
printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n",
|
|
ag->dev->name,
|
|
ag71xx_speed_str(ag),
|
|
(DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
|
|
|
|
DBG("%s: fifo1=%#x, fifo2=%#x, fifo3=%#x, fifo4=%#x, fifo5=%#x\n",
|
|
ag->dev->name,
|
|
ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
|
|
ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2),
|
|
ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
|
|
ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
|
|
ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
|
|
|
|
DBG("%s: mac_cfg2=%#x, ifctl=%#x, mii_ctrl=%#x\n",
|
|
ag->dev->name,
|
|
ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
|
|
ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
|
|
ag71xx_mii_ctrl_rr(ag));
|
|
}
|
|
|
|
static void ag71xx_phy_link_adjust(struct net_device *dev)
|
|
{
|
|
struct ag71xx *ag = netdev_priv(dev);
|
|
struct phy_device *phydev = ag->phy_dev;
|
|
unsigned long flags;
|
|
int status_change = 0;
|
|
|
|
spin_lock_irqsave(&ag->lock, flags);
|
|
|
|
if (phydev->link) {
|
|
if (ag->duplex != phydev->duplex
|
|
|| ag->speed != phydev->speed) {
|
|
status_change = 1;
|
|
}
|
|
}
|
|
|
|
if (phydev->link != ag->link) {
|
|
if (phydev->link)
|
|
netif_schedule(dev);
|
|
|
|
status_change = 1;
|
|
}
|
|
|
|
ag->link = phydev->link;
|
|
ag->duplex = phydev->duplex;
|
|
ag->speed = phydev->speed;
|
|
|
|
if (status_change)
|
|
ag71xx_phy_link_update(ag);
|
|
|
|
spin_unlock_irqrestore(&ag->lock, flags);
|
|
}
|
|
|
|
void ag71xx_phy_start(struct ag71xx *ag)
|
|
{
|
|
if (ag->phy_dev) {
|
|
phy_start(ag->phy_dev);
|
|
} else {
|
|
ag->duplex = DUPLEX_FULL;
|
|
ag->speed = SPEED_100;
|
|
ag->link = 1;
|
|
ag71xx_phy_link_update(ag);
|
|
}
|
|
}
|
|
|
|
void ag71xx_phy_stop(struct ag71xx *ag)
|
|
{
|
|
if (ag->phy_dev) {
|
|
phy_stop(ag->phy_dev);
|
|
} else {
|
|
ag->duplex = -1;
|
|
ag->link = 0;
|
|
ag->speed = 0;
|
|
ag71xx_phy_link_update(ag);
|
|
}
|
|
}
|
|
|
|
int ag71xx_phy_connect(struct ag71xx *ag)
|
|
{
|
|
struct net_device *dev = ag->dev;
|
|
struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
|
|
struct phy_device *phydev = NULL;
|
|
int phy_count = 0;
|
|
int phy_addr;
|
|
|
|
if (ag->mii_bus) {
|
|
/* TODO: use mutex of the mdio bus */
|
|
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
|
|
if (!(pdata->phy_mask & (1 << phy_addr)))
|
|
continue;
|
|
|
|
if (ag->mii_bus->phy_map[phy_addr] == NULL)
|
|
continue;
|
|
|
|
DBG("%s: PHY found at %s, uid=%08x\n",
|
|
dev->name,
|
|
ag->mii_bus->phy_map[phy_addr]->dev.bus_id,
|
|
ag->mii_bus->phy_map[phy_addr]->phy_id);
|
|
|
|
if (phydev == NULL)
|
|
phydev = ag->mii_bus->phy_map[phy_addr];
|
|
|
|
phy_count++;
|
|
}
|
|
}
|
|
|
|
switch (phy_count) {
|
|
case 0:
|
|
printk(KERN_ERR "%s: no PHY found\n", dev->name);
|
|
return -ENODEV;
|
|
case 1:
|
|
ag->phy_dev = phy_connect(dev, phydev->dev.bus_id,
|
|
&ag71xx_phy_link_adjust, 0, pdata->phy_if_mode);
|
|
|
|
if (IS_ERR(ag->phy_dev)) {
|
|
printk(KERN_ERR "%s: could not connect to PHY at %s\n",
|
|
dev->name, phydev->dev.bus_id);
|
|
return PTR_ERR(ag->phy_dev);
|
|
}
|
|
|
|
/* mask with MAC supported features */
|
|
phydev->supported &= (SUPPORTED_10baseT_Half
|
|
| SUPPORTED_10baseT_Full
|
|
| SUPPORTED_100baseT_Half
|
|
| SUPPORTED_100baseT_Full
|
|
| SUPPORTED_Autoneg
|
|
| SUPPORTED_MII
|
|
| SUPPORTED_TP);
|
|
|
|
phydev->advertising = phydev->supported;
|
|
|
|
printk(KERN_DEBUG "%s: connected to PHY at %s "
|
|
"[uid=%08x, driver=%s]\n",
|
|
dev->name, phydev->dev.bus_id,
|
|
phydev->phy_id, phydev->drv->name);
|
|
|
|
ag->link = 0;
|
|
ag->speed = 0;
|
|
ag->duplex = -1;
|
|
break;
|
|
default:
|
|
ag->phy_dev = NULL;
|
|
printk(KERN_DEBUG "%s: connected to multiple PHYs (%d)\n",
|
|
dev->name, phy_count);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ag71xx_phy_disconnect(struct ag71xx *ag)
|
|
{
|
|
if (ag->phy_dev)
|
|
phy_disconnect(ag->phy_dev);
|
|
}
|