mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 17:02:05 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28108 3c298f89-4303-0410-b956-a3cf2f4a3e73
348 lines
8.9 KiB
Diff
348 lines
8.9 KiB
Diff
--- a/drivers/net/wireless/ath/ath9k/main.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/main.c
|
|
@@ -212,83 +212,39 @@ static int ath_update_survey_stats(struc
|
|
return ret;
|
|
}
|
|
|
|
-/*
|
|
- * Set/change channels. If the channel is really being changed, it's done
|
|
- * by reseting the chip. To accomplish this we must first cleanup any pending
|
|
- * DMA, then restart stuff.
|
|
-*/
|
|
-static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
|
|
- struct ath9k_channel *hchan)
|
|
+static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx)
|
|
{
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
- struct ath_common *common = ath9k_hw_common(ah);
|
|
- struct ieee80211_conf *conf = &common->hw->conf;
|
|
- bool fastcc = true, stopped;
|
|
- struct ieee80211_channel *channel = hw->conf.channel;
|
|
- struct ath9k_hw_cal_data *caldata = NULL;
|
|
- int r;
|
|
+ bool ret;
|
|
|
|
- if (sc->sc_flags & SC_OP_INVALID)
|
|
- return -EIO;
|
|
+ ieee80211_stop_queues(sc->hw);
|
|
|
|
sc->hw_busy_count = 0;
|
|
-
|
|
- del_timer_sync(&common->ani.timer);
|
|
cancel_work_sync(&sc->paprd_work);
|
|
cancel_work_sync(&sc->hw_check_work);
|
|
cancel_delayed_work_sync(&sc->tx_complete_work);
|
|
cancel_delayed_work_sync(&sc->hw_pll_work);
|
|
|
|
- ath9k_ps_wakeup(sc);
|
|
-
|
|
- spin_lock_bh(&sc->sc_pcu_lock);
|
|
-
|
|
- /*
|
|
- * This is only performed if the channel settings have
|
|
- * actually changed.
|
|
- *
|
|
- * To switch channels clear any pending DMA operations;
|
|
- * wait long enough for the RX fifo to drain, reset the
|
|
- * hardware at the new frequency, and then re-enable
|
|
- * the relevant bits of the h/w.
|
|
- */
|
|
ath9k_hw_disable_interrupts(ah);
|
|
- stopped = ath_drain_all_txq(sc, false);
|
|
|
|
- if (!ath_stoprecv(sc))
|
|
- stopped = false;
|
|
-
|
|
- if (!ath9k_hw_check_alive(ah))
|
|
- stopped = false;
|
|
-
|
|
- /* XXX: do not flush receive queue here. We don't want
|
|
- * to flush data frames already in queue because of
|
|
- * changing channel. */
|
|
+ ret = ath_drain_all_txq(sc, retry_tx);
|
|
|
|
- if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
|
|
- fastcc = false;
|
|
+ if (!ath_stoprecv(sc))
|
|
+ ret = false;
|
|
|
|
- if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
|
|
- caldata = &sc->caldata;
|
|
+ ath_flushrecv(sc);
|
|
|
|
- ath_dbg(common, ATH_DBG_CONFIG,
|
|
- "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
|
|
- sc->sc_ah->curchan->channel,
|
|
- channel->center_freq, conf_is_ht40(conf),
|
|
- fastcc);
|
|
+ return ret;
|
|
+}
|
|
|
|
- r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
|
|
- if (r) {
|
|
- ath_err(common,
|
|
- "Unable to reset channel (%u MHz), reset status %d\n",
|
|
- channel->center_freq, r);
|
|
- goto ps_restore;
|
|
- }
|
|
+static bool ath_complete_reset(struct ath_softc *sc, bool start)
|
|
+{
|
|
+ struct ath_hw *ah = sc->sc_ah;
|
|
+ struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
if (ath_startrecv(sc) != 0) {
|
|
ath_err(common, "Unable to restart recv logic\n");
|
|
- r = -EIO;
|
|
- goto ps_restore;
|
|
+ return false;
|
|
}
|
|
|
|
ath9k_cmn_update_txpow(ah, sc->curtxpow,
|
|
@@ -296,21 +252,87 @@ static int ath_set_channel(struct ath_so
|
|
ath9k_hw_set_interrupts(ah, ah->imask);
|
|
ath9k_hw_enable_interrupts(ah);
|
|
|
|
- if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
|
|
+ if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) {
|
|
if (sc->sc_flags & SC_OP_BEACONS)
|
|
ath_set_beacon(sc);
|
|
+
|
|
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
|
|
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
|
|
if (!common->disable_ani)
|
|
ath_start_ani(common);
|
|
}
|
|
|
|
- ps_restore:
|
|
- ieee80211_wake_queues(hw);
|
|
+ ieee80211_wake_queues(sc->hw);
|
|
+
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
|
|
+ bool retry_tx)
|
|
+{
|
|
+ struct ath_hw *ah = sc->sc_ah;
|
|
+ struct ath_common *common = ath9k_hw_common(ah);
|
|
+ struct ath9k_hw_cal_data *caldata = NULL;
|
|
+ bool fastcc = true;
|
|
+ int r;
|
|
+
|
|
+ if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) {
|
|
+ fastcc = false;
|
|
+ caldata = &sc->caldata;
|
|
+ }
|
|
|
|
+ if (!hchan) {
|
|
+ fastcc = false;
|
|
+ hchan = ah->curchan;
|
|
+ }
|
|
+
|
|
+ if (fastcc && !ath9k_hw_check_alive(ah))
|
|
+ fastcc = false;
|
|
+
|
|
+ if (!ath_prepare_reset(sc, retry_tx))
|
|
+ fastcc = false;
|
|
+
|
|
+ ath_dbg(common, ATH_DBG_CONFIG,
|
|
+ "Reset to %u MHz, HT40: %d fastcc: %d\n",
|
|
+ hchan->channel, !!(hchan->channelFlags & (CHANNEL_HT40MINUS |
|
|
+ CHANNEL_HT40PLUS)),
|
|
+ fastcc);
|
|
+
|
|
+ r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
|
|
+ if (r) {
|
|
+ ath_err(common,
|
|
+ "Unable to reset channel, reset status %d\n", r);
|
|
+ return r;
|
|
+ }
|
|
+
|
|
+ if (!ath_complete_reset(sc, true))
|
|
+ return -EIO;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Set/change channels. If the channel is really being changed, it's done
|
|
+ * by reseting the chip. To accomplish this we must first cleanup any pending
|
|
+ * DMA, then restart stuff.
|
|
+*/
|
|
+static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
|
|
+ struct ath9k_channel *hchan)
|
|
+{
|
|
+ int r;
|
|
+
|
|
+ if (sc->sc_flags & SC_OP_INVALID)
|
|
+ return -EIO;
|
|
+
|
|
+ ath9k_ps_wakeup(sc);
|
|
+
|
|
+ spin_lock_bh(&sc->sc_pcu_lock);
|
|
+ r = ath_reset_internal(sc, hchan, false);
|
|
spin_unlock_bh(&sc->sc_pcu_lock);
|
|
|
|
ath9k_ps_restore(sc);
|
|
+
|
|
return r;
|
|
}
|
|
|
|
@@ -893,28 +915,13 @@ static void ath_radio_enable(struct ath_
|
|
channel->center_freq, r);
|
|
}
|
|
|
|
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
|
|
- sc->config.txpowlimit, &sc->curtxpow);
|
|
- if (ath_startrecv(sc) != 0) {
|
|
- ath_err(common, "Unable to restart recv logic\n");
|
|
- goto out;
|
|
- }
|
|
- if (sc->sc_flags & SC_OP_BEACONS)
|
|
- ath_set_beacon(sc); /* restart beacons */
|
|
-
|
|
- /* Re-Enable interrupts */
|
|
- ath9k_hw_set_interrupts(ah, ah->imask);
|
|
- ath9k_hw_enable_interrupts(ah);
|
|
+ ath_complete_reset(sc, true);
|
|
|
|
/* Enable LED */
|
|
ath9k_hw_cfg_output(ah, ah->led_pin,
|
|
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
|
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
|
|
|
|
- ieee80211_wake_queues(hw);
|
|
- ieee80211_queue_delayed_work(hw, &sc->hw_pll_work, HZ/2);
|
|
-
|
|
-out:
|
|
spin_unlock_bh(&sc->sc_pcu_lock);
|
|
|
|
ath9k_ps_restore(sc);
|
|
@@ -942,13 +949,7 @@ void ath_radio_disable(struct ath_softc
|
|
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
|
|
}
|
|
|
|
- /* Disable interrupts */
|
|
- ath9k_hw_disable_interrupts(ah);
|
|
-
|
|
- ath_drain_all_txq(sc, false); /* clear pending tx frames */
|
|
-
|
|
- ath_stoprecv(sc); /* turn off frame recv */
|
|
- ath_flushrecv(sc); /* flush recv queue */
|
|
+ ath_prepare_reset(sc, false);
|
|
|
|
if (!ah->curchan)
|
|
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
|
|
@@ -970,48 +971,11 @@ void ath_radio_disable(struct ath_softc
|
|
|
|
int ath_reset(struct ath_softc *sc, bool retry_tx)
|
|
{
|
|
- struct ath_hw *ah = sc->sc_ah;
|
|
- struct ath_common *common = ath9k_hw_common(ah);
|
|
- struct ieee80211_hw *hw = sc->hw;
|
|
int r;
|
|
|
|
- sc->hw_busy_count = 0;
|
|
-
|
|
- /* Stop ANI */
|
|
-
|
|
- del_timer_sync(&common->ani.timer);
|
|
-
|
|
ath9k_ps_wakeup(sc);
|
|
|
|
- ieee80211_stop_queues(hw);
|
|
-
|
|
- ath9k_hw_disable_interrupts(ah);
|
|
- ath_drain_all_txq(sc, retry_tx);
|
|
-
|
|
- ath_stoprecv(sc);
|
|
- ath_flushrecv(sc);
|
|
-
|
|
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
|
|
- if (r)
|
|
- ath_err(common,
|
|
- "Unable to reset hardware; reset status %d\n", r);
|
|
-
|
|
- if (ath_startrecv(sc) != 0)
|
|
- ath_err(common, "Unable to start recv logic\n");
|
|
-
|
|
- /*
|
|
- * We may be doing a reset in response to a request
|
|
- * that changes the channel so update any state that
|
|
- * might change as a result.
|
|
- */
|
|
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
|
|
- sc->config.txpowlimit, &sc->curtxpow);
|
|
-
|
|
- if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
|
|
- ath_set_beacon(sc); /* restart beacons */
|
|
-
|
|
- ath9k_hw_set_interrupts(ah, ah->imask);
|
|
- ath9k_hw_enable_interrupts(ah);
|
|
+ r = ath_reset_internal(sc, NULL, retry_tx);
|
|
|
|
if (retry_tx) {
|
|
int i;
|
|
@@ -1024,12 +988,6 @@ int ath_reset(struct ath_softc *sc, bool
|
|
}
|
|
}
|
|
|
|
- ieee80211_wake_queues(hw);
|
|
-
|
|
- /* Start ANI */
|
|
- if (!common->disable_ani)
|
|
- ath_start_ani(common);
|
|
-
|
|
ath9k_ps_restore(sc);
|
|
|
|
return r;
|
|
@@ -1081,28 +1039,6 @@ static int ath9k_start(struct ieee80211_
|
|
goto mutex_unlock;
|
|
}
|
|
|
|
- /*
|
|
- * This is needed only to setup initial state
|
|
- * but it's best done after a reset.
|
|
- */
|
|
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
|
|
- sc->config.txpowlimit, &sc->curtxpow);
|
|
-
|
|
- /*
|
|
- * Setup the hardware after reset:
|
|
- * The receive engine is set going.
|
|
- * Frame transmit is handled entirely
|
|
- * in the frame output path; there's nothing to do
|
|
- * here except setup the interrupt mask.
|
|
- */
|
|
- if (ath_startrecv(sc) != 0) {
|
|
- ath_err(common, "Unable to start recv logic\n");
|
|
- r = -EIO;
|
|
- spin_unlock_bh(&sc->sc_pcu_lock);
|
|
- goto mutex_unlock;
|
|
- }
|
|
- spin_unlock_bh(&sc->sc_pcu_lock);
|
|
-
|
|
/* Setup our intr mask. */
|
|
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
|
|
ATH9K_INT_RXORN | ATH9K_INT_FATAL |
|
|
@@ -1125,12 +1061,14 @@ static int ath9k_start(struct ieee80211_
|
|
|
|
/* Disable BMISS interrupt when we're not associated */
|
|
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
|
|
- ath9k_hw_set_interrupts(ah, ah->imask);
|
|
- ath9k_hw_enable_interrupts(ah);
|
|
|
|
- ieee80211_wake_queues(hw);
|
|
+ if (!ath_complete_reset(sc, false)) {
|
|
+ r = -EIO;
|
|
+ spin_unlock_bh(&sc->sc_pcu_lock);
|
|
+ goto mutex_unlock;
|
|
+ }
|
|
|
|
- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
|
|
+ spin_unlock_bh(&sc->sc_pcu_lock);
|
|
|
|
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
|
|
!ah->btcoex_hw.enabled) {
|