juhosg 57ffcdaccd ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards ... This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-01-26 10:44:23 +00:00
..
imagebuilder	ImageBuilder: respect the PROFILE parameter	2012-01-24 09:47:20 +00:00
linux	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	2012-01-26 10:44:23 +00:00
sdk	[sdk] fix generation for arm platforms	2011-09-13 07:39:14 +00:00
toolchain	target/toolchain: fix installation after r22723	2010-09-04 11:56:33 +00:00
Config.in	mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus	2011-01-16 01:25:06 +00:00
Makefile	Add a target (CONFIG_MAKE_CONFIG) that creates an exportable toolchain. The toolchain will zipped and saved under $(TOPDIR)/bin directory.	2009-11-14 17:51:32 +00:00