mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 23:35:20 +02:00
cc05485408
Add ident_callback which is called after the nand chip has been identified and before it is setup. This can be used by board code to set partition and ecc info depending on the chip.
419 lines
10 KiB
C
419 lines
10 KiB
C
/*
|
|
* Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
|
|
* JZ4720/JZ4740 SoC NAND controller driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/mtd/jz4740_nand.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#define JZ_REG_NAND_CTRL 0x50
|
|
#define JZ_REG_NAND_ECC_CTRL 0x100
|
|
#define JZ_REG_NAND_DATA 0x104
|
|
#define JZ_REG_NAND_PAR0 0x108
|
|
#define JZ_REG_NAND_PAR1 0x10C
|
|
#define JZ_REG_NAND_PAR2 0x110
|
|
#define JZ_REG_NAND_IRQ_STAT 0x114
|
|
#define JZ_REG_NAND_IRQ_CTRL 0x118
|
|
#define JZ_REG_NAND_ERR(x) (0x11C + (x << 2))
|
|
|
|
#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
|
|
#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
|
|
#define JZ_NAND_ECC_CTRL_RS BIT(2)
|
|
#define JZ_NAND_ECC_CTRL_RESET BIT(1)
|
|
#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
|
|
|
|
#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
|
|
#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
|
|
#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
|
|
#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
|
|
#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
|
|
#define JZ_NAND_STATUS_ERROR BIT(0)
|
|
|
|
#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT(x << 1)
|
|
#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT((x << 1) + 1)
|
|
|
|
#define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
|
|
#define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
|
|
#define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
|
|
|
|
struct jz_nand {
|
|
struct mtd_info mtd;
|
|
struct nand_chip chip;
|
|
void __iomem *base;
|
|
struct resource *mem;
|
|
|
|
struct jz_nand_platform_data *pdata;
|
|
};
|
|
|
|
static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
|
|
{
|
|
return container_of(mtd, struct jz_nand, mtd);
|
|
}
|
|
|
|
static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
struct nand_chip *chip = mtd->priv;
|
|
uint32_t reg;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
|
|
if (ctrl & NAND_ALE)
|
|
chip->IO_ADDR_W = JZ_NAND_ADDR_ADDR;
|
|
else if (ctrl & NAND_CLE)
|
|
chip->IO_ADDR_W = JZ_NAND_CMD_ADDR;
|
|
else
|
|
chip->IO_ADDR_W = JZ_NAND_DATA_ADDR;
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_CTRL);
|
|
if ( ctrl & NAND_NCE )
|
|
reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
else
|
|
reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
writel(reg, nand->base + JZ_REG_NAND_CTRL);
|
|
}
|
|
if (dat != NAND_CMD_NONE)
|
|
writeb(dat, chip->IO_ADDR_W);
|
|
}
|
|
|
|
static int jz_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
return gpio_get_value_cansleep(nand->pdata->busy_gpio);
|
|
}
|
|
|
|
static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
uint32_t reg;
|
|
|
|
|
|
writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
reg |= JZ_NAND_ECC_CTRL_RESET;
|
|
reg |= JZ_NAND_ECC_CTRL_ENABLE;
|
|
reg |= JZ_NAND_ECC_CTRL_RS;
|
|
|
|
switch(mode) {
|
|
case NAND_ECC_READ:
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
|
|
break;
|
|
case NAND_ECC_WRITE:
|
|
reg |= JZ_NAND_ECC_CTRL_ENCODING;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
}
|
|
|
|
static int jz_nand_calculate_ecc_rs(struct mtd_info* mtd, const uint8_t* dat,
|
|
uint8_t *ecc_code)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
uint32_t reg, status;
|
|
int i;
|
|
|
|
do {
|
|
status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
} while(!(status & JZ_NAND_STATUS_ENC_FINISH));
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
for (i = 0; i < 9; ++i) {
|
|
ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void correct_data(uint8_t *dat, int index, int mask)
|
|
{
|
|
int offset = index & 0x7;
|
|
uint16_t data;
|
|
printk("correct: ");
|
|
|
|
index += (index >> 3);
|
|
|
|
data = dat[index];
|
|
data |= dat[index+1] << 8;
|
|
|
|
printk("0x%x -> ", data);
|
|
|
|
mask ^= (data >> offset) & 0x1ff;
|
|
data &= ~(0x1ff << offset);
|
|
data |= (mask << offset);
|
|
|
|
printk("0x%x\n", data);
|
|
|
|
dat[index] = data & 0xff;
|
|
dat[index+1] = (data >> 8) & 0xff;
|
|
}
|
|
|
|
static int jz_nand_correct_ecc_rs(struct mtd_info* mtd, uint8_t *dat,
|
|
uint8_t *read_ecc, uint8_t *calc_ecc)
|
|
{
|
|
struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
int i, error_count, index;
|
|
uint32_t reg, status, error;
|
|
|
|
for(i = 0; i < 9; ++i) {
|
|
if (read_ecc[i] != 0xff)
|
|
break;
|
|
}
|
|
if (i == 9) {
|
|
for (i = 0; i < nand->chip.ecc.size; ++i) {
|
|
if (dat[i] != 0xff)
|
|
break;
|
|
}
|
|
if (i == nand->chip.ecc.size)
|
|
return 0;
|
|
}
|
|
|
|
for(i = 0; i < 9; ++i)
|
|
writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg |= JZ_NAND_ECC_CTRL_PAR_READY;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
do {
|
|
status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
} while (!(status & JZ_NAND_STATUS_DEC_FINISH));
|
|
|
|
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
|
|
if (status & JZ_NAND_STATUS_ERROR) {
|
|
if (status & JZ_NAND_STATUS_UNCOR_ERROR) {
|
|
printk("uncorrectable ecc:");
|
|
for(i = 0; i < 9; ++i)
|
|
printk(" 0x%x", read_ecc[i]);
|
|
printk("\n");
|
|
printk("uncorrectable data:");
|
|
for(i = 0; i < 32; ++i)
|
|
printk(" 0x%x", dat[i]);
|
|
printk("\n");
|
|
return -1;
|
|
}
|
|
|
|
error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
|
|
|
|
printk("error_count: %d %x\n", error_count, status);
|
|
|
|
for(i = 0; i < error_count; ++i) {
|
|
error = readl(nand->base + JZ_REG_NAND_ERR(i));
|
|
index = ((error >> 16) & 0x1ff) - 1;
|
|
if (index >= 0 && index < 512) {
|
|
correct_data(dat, index, error & 0x1ff);
|
|
}
|
|
}
|
|
|
|
return error_count;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
static const char *part_probes[] = {"cmdline", NULL};
|
|
#endif
|
|
|
|
static int __devinit jz_nand_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct jz_nand *nand;
|
|
struct nand_chip *chip;
|
|
struct mtd_info *mtd;
|
|
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
struct mtd_partition *partition_info;
|
|
int num_partitions = 0;
|
|
#endif
|
|
|
|
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
|
|
if (!nand) {
|
|
dev_err(&pdev->dev, "Failed to allocate device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
nand->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!nand->mem) {
|
|
dev_err(&pdev->dev, "Failed to get platform mmio memory\n");
|
|
ret = -ENOENT;
|
|
goto err_free;
|
|
}
|
|
|
|
nand->mem = request_mem_region(nand->mem->start, resource_size(nand->mem),
|
|
pdev->name);
|
|
|
|
if (!nand->mem) {
|
|
dev_err(&pdev->dev, "Failed to request mmio memory region\n");
|
|
ret = -EBUSY;
|
|
goto err_free;
|
|
}
|
|
|
|
nand->base = ioremap(nand->mem->start, resource_size(nand->mem));
|
|
|
|
if (!nand->base) {
|
|
dev_err(&pdev->dev, "Faild to ioremap mmio memory region\n");
|
|
ret = -EBUSY;
|
|
goto err_release_mem;
|
|
}
|
|
|
|
if (pdata && gpio_is_valid(pdata->busy_gpio)) {
|
|
ret = gpio_request(pdata->busy_gpio, "jz nand busy line");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to request busy gpio %d: %d\n",
|
|
pdata->busy_gpio, ret);
|
|
goto err_iounmap;
|
|
}
|
|
}
|
|
|
|
mtd = &nand->mtd;
|
|
chip = &nand->chip;
|
|
mtd->priv = chip;
|
|
mtd->owner = THIS_MODULE;
|
|
mtd->name = "jz4740-nand";
|
|
|
|
chip->ecc.hwctl = jz_nand_hwctl;
|
|
|
|
chip->ecc.calculate = jz_nand_calculate_ecc_rs;
|
|
chip->ecc.correct = jz_nand_correct_ecc_rs;
|
|
chip->ecc.mode = NAND_ECC_HW;
|
|
chip->ecc.size = 512;
|
|
chip->ecc.bytes = 9;
|
|
if (pdata)
|
|
chip->ecc.layout = pdata->ecc_layout;
|
|
|
|
chip->chip_delay = 50;
|
|
chip->cmd_ctrl = jz_nand_cmd_ctrl;
|
|
|
|
if (pdata && gpio_is_valid(pdata->busy_gpio))
|
|
chip->dev_ready = jz_nand_dev_ready;
|
|
|
|
chip->IO_ADDR_R = JZ_NAND_DATA_ADDR;
|
|
chip->IO_ADDR_W = JZ_NAND_DATA_ADDR;
|
|
|
|
nand->pdata = pdata;
|
|
platform_set_drvdata(pdev, nand);
|
|
|
|
ret = nand_scan_ident(mtd, 1);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
goto err_gpio_free;
|
|
}
|
|
|
|
if (pdata && pdata->ident_callback) {
|
|
pdata->ident_callback(pdev, chip, &pdata->partitions, &pdata->num_partitions);
|
|
}
|
|
|
|
ret = nand_scan_tail(mtd);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
goto err_gpio_free;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
num_partitions = parse_mtd_partitions(mtd, part_probes,
|
|
&partition_info, 0);
|
|
#endif
|
|
if (num_partitions <= 0 && pdata) {
|
|
num_partitions = pdata->num_partitions;
|
|
partition_info = pdata->partitions;
|
|
}
|
|
|
|
if (num_partitions > 0)
|
|
ret = add_mtd_partitions(mtd, partition_info, num_partitions);
|
|
else
|
|
#endif
|
|
ret = add_mtd_device(mtd);
|
|
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add mtd device\n");
|
|
goto err_nand_release;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
|
|
|
|
return 0;
|
|
err_nand_release:
|
|
nand_release(&nand->mtd);
|
|
err_gpio_free:
|
|
platform_set_drvdata(pdev, NULL);
|
|
gpio_free(pdata->busy_gpio);
|
|
err_iounmap:
|
|
iounmap(nand->base);
|
|
err_release_mem:
|
|
release_mem_region(nand->mem->start, resource_size(nand->mem));
|
|
err_free:
|
|
kfree(nand);
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit jz_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz_nand *nand = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&nand->mtd);
|
|
|
|
iounmap(nand->base);
|
|
|
|
release_mem_region(nand->mem->start, resource_size(nand->mem));
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(nand);
|
|
}
|
|
|
|
struct platform_driver jz_nand_driver = {
|
|
.probe = jz_nand_probe,
|
|
.remove = __devexit_p(jz_nand_probe),
|
|
.driver = {
|
|
.name = "jz4740-nand",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init jz_nand_init(void)
|
|
{
|
|
return platform_driver_register(&jz_nand_driver);
|
|
}
|
|
module_init(jz_nand_init);
|
|
|
|
static void __exit jz_nand_exit(void)
|
|
{
|
|
platform_driver_unregister(&jz_nand_driver);
|
|
}
|
|
module_exit(jz_nand_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("NAND controller driver for JZ4720/JZ4740 SoC");
|
|
MODULE_ALIAS("platform:jz4740-nand");
|
|
MODULE_ALIAS("platform:jz4720-nand");
|