blogic d8df31cd7d [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) ...

Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73

2012-12-21 20:04:04 +00:00

..

0001-MIPS-lantiq-unbreak-devicetree-init.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0002-MIPS-lantiq-fix-bootselect-bits-on-XRX200-SoC.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0003-MIPS-lantiq-verbose-init-of-dma-core.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0004-MIPS-lantiq-adds-xrx200-ethernet-clock-definition.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0006-MIPS-lantiq-adds-GPHY-firmware-loader.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0100-MIPS-lantiq-honour-model-property-inside-devicetree-.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0101-MIPS-lantiq-adds-support-for-SVIP-SoC-Family.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0102-MIPS-lantiq-add-GPHY-clock-gate-bits.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0103-MIPS-lantiq-adds-static-clock-for-PP32.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0104-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0105-MIPS-lantiq-rework-external-irq-code.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0106-MIPS-lantiq-adds-minimal-dcdc-driver.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0107-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0108-PINCTRL-lantiq-fixes.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0109-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0110-Document-devicetree-add-OF-documents-for-lantiq-seri.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0111-MTD-MIPS-lantiq-Add-NAND-support-on-Lantiq-FALCON-So.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0112-MTD-lantiq-xway-fix-NAND-reset-timeout-handling.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0113-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0114-SPI-MIPS-lantiq-adds-spi-xway.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

[lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys

2012-12-21 14:41:35 +00:00

0116-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0117-NET-MIPS-lantiq-adds-xrx200-net.patch

[lantiq] add phy-reset gpio handling to xrx200-net

2012-12-21 13:47:44 +00:00

0118-owrt-adds-PHY11G-firmware-blobs.patch

[lantiq] refresh patch and install v1.1 gphy blobs

2012-12-21 13:47:35 +00:00

0119-owrt-ATM-adds-lantiq-specific-hacks.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0120-owrt-generic-dtb-image-hack.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0121-owrt-lantiq-dtb-image-hack.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0122-MIPS-lantiq-adds-pcie-driver.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0123-USB-fix-roothub-for-IFXHCD.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0124-pci_fix.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0125-falcon-pad.patch

[lantiq] make pinctrl-falcon honour status="disbaled";

2012-12-16 10:03:28 +00:00

0126-lantiq_etop-Change-MDIO-clock.patch

[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)

2012-12-21 20:04:04 +00:00

0127-lantiq_etop-Fix-supported-modes-flag.patch

[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)

2012-12-21 20:04:04 +00:00

0300-owrt-mtd-split.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0301-gptu.patch

[lantiq] fix gptu clocks

2012-12-19 15:17:31 +00:00

0302-wifi-eep.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0303-vmmc.patch

[lantiq] add linux-v3.7

2012-12-15 01:59:45 +00:00

0304-etop.patch

[lantiq] adds a fix for ar8216 mii detection on etop driver

2012-12-19 16:20:24 +00:00