mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-30 23:49:42 +02:00
1c466b799b
* rework the arcadyan sku support * adds a few new boards and switches git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25273 3c298f89-4303-0410-b956-a3cf2f4a3e73
135 lines
4.0 KiB
C
135 lines
4.0 KiB
C
#ifndef _ATHRS26_PHY_H
|
|
#define _ATHRS26_PHY_H
|
|
|
|
/*****************/
|
|
/* PHY Registers */
|
|
/*****************/
|
|
#define ATHR_PHY_CONTROL 0
|
|
#define ATHR_PHY_STATUS 1
|
|
#define ATHR_PHY_ID1 2
|
|
#define ATHR_PHY_ID2 3
|
|
#define ATHR_AUTONEG_ADVERT 4
|
|
#define ATHR_LINK_PARTNER_ABILITY 5
|
|
#define ATHR_AUTONEG_EXPANSION 6
|
|
#define ATHR_NEXT_PAGE_TRANSMIT 7
|
|
#define ATHR_LINK_PARTNER_NEXT_PAGE 8
|
|
#define ATHR_1000BASET_CONTROL 9
|
|
#define ATHR_1000BASET_STATUS 10
|
|
#define ATHR_PHY_SPEC_CONTROL 16
|
|
#define ATHR_PHY_SPEC_STATUS 17
|
|
#define ATHR_DEBUG_PORT_ADDRESS 29
|
|
#define ATHR_DEBUG_PORT_DATA 30
|
|
|
|
/* ATHR_PHY_CONTROL fields */
|
|
#define ATHR_CTRL_SOFTWARE_RESET 0x8000
|
|
#define ATHR_CTRL_SPEED_LSB 0x2000
|
|
#define ATHR_CTRL_AUTONEGOTIATION_ENABLE 0x1000
|
|
#define ATHR_CTRL_RESTART_AUTONEGOTIATION 0x0200
|
|
#define ATHR_CTRL_SPEED_FULL_DUPLEX 0x0100
|
|
#define ATHR_CTRL_SPEED_MSB 0x0040
|
|
|
|
#define ATHR_RESET_DONE(phy_control) \
|
|
(((phy_control) & (ATHR_CTRL_SOFTWARE_RESET)) == 0)
|
|
|
|
/* Phy status fields */
|
|
#define ATHR_STATUS_AUTO_NEG_DONE 0x0020
|
|
|
|
#define ATHR_AUTONEG_DONE(ip_phy_status) \
|
|
(((ip_phy_status) & \
|
|
(ATHR_STATUS_AUTO_NEG_DONE)) == \
|
|
(ATHR_STATUS_AUTO_NEG_DONE))
|
|
|
|
/* Link Partner ability */
|
|
#define ATHR_LINK_100BASETX_FULL_DUPLEX 0x0100
|
|
#define ATHR_LINK_100BASETX 0x0080
|
|
#define ATHR_LINK_10BASETX_FULL_DUPLEX 0x0040
|
|
#define ATHR_LINK_10BASETX 0x0020
|
|
|
|
/* Advertisement register. */
|
|
#define ATHR_ADVERTISE_NEXT_PAGE 0x8000
|
|
#define ATHR_ADVERTISE_ASYM_PAUSE 0x0800
|
|
#define ATHR_ADVERTISE_PAUSE 0x0400
|
|
#define ATHR_ADVERTISE_100FULL 0x0100
|
|
#define ATHR_ADVERTISE_100HALF 0x0080
|
|
#define ATHR_ADVERTISE_10FULL 0x0040
|
|
#define ATHR_ADVERTISE_10HALF 0x0020
|
|
|
|
#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \
|
|
ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL)
|
|
|
|
/* 1000BASET_CONTROL */
|
|
#define ATHR_ADVERTISE_1000FULL 0x0200
|
|
|
|
/* Phy Specific status fields */
|
|
#define ATHER_STATUS_LINK_MASK 0xC000
|
|
#define ATHER_STATUS_LINK_SHIFT 14
|
|
#define ATHER_STATUS_FULL_DEPLEX 0x2000
|
|
#define ATHR_STATUS_LINK_PASS 0x0400
|
|
#define ATHR_STATUS_RESOVLED 0x0800
|
|
|
|
/*phy debug port register */
|
|
#define ATHER_DEBUG_SERDES_REG 5
|
|
|
|
/* Serdes debug fields */
|
|
#define ATHER_SERDES_BEACON 0x0100
|
|
|
|
#ifndef BOOL
|
|
#define BOOL int
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
#endif
|
|
|
|
#define sysMsDelay(_x) udelay((_x) * 1000)
|
|
|
|
#undef S26_VER_1_0
|
|
|
|
#ifdef CFG_ATHRHDR_EN
|
|
|
|
#include <net.h>
|
|
#define header_xmit(dev,pkt,len) dev->send(dev,pkt,len) //dev_queue_xmit(skb)
|
|
#define header_recv_ack(dev) dev->recv(dev) //dev_queue_xmit(skb)
|
|
|
|
typedef enum {
|
|
NORMAL_PACKET,
|
|
RESERVED0,
|
|
MIB_1ST,
|
|
RESERVED1,
|
|
RESERVED2,
|
|
READ_WRITE_REG,
|
|
READ_WRITE_REG_ACK,
|
|
RESERVED3
|
|
} ATHR_HDR_TYPE;
|
|
|
|
typedef struct {
|
|
uint16_t reserved0;
|
|
uint16_t priority;
|
|
uint16_t type ;
|
|
uint16_t broadcast;
|
|
uint16_t from_cpu;
|
|
uint16_t reserved1;
|
|
uint16_t port_num;
|
|
}at_header_t;
|
|
|
|
typedef struct {
|
|
uint64_t reg_addr;
|
|
uint64_t reserved0;
|
|
uint64_t cmd_len;
|
|
uint64_t reserved1;
|
|
uint64_t cmd;
|
|
uint64_t reserved2;
|
|
uint64_t seq_num;
|
|
}reg_cmd_t;
|
|
void athrs26_reg_init(void);
|
|
int header_receive_pkt(uchar *pkt);
|
|
void athrs26_reg_dev(struct eth_device *mac);
|
|
|
|
#endif
|
|
|
|
int athrs26_phy_is_up(int unit);
|
|
int athrs26_phy_is_fdx(int unit);
|
|
int athrs26_phy_speed(int unit);
|
|
BOOL athrs26_phy_setup(int unit);
|
|
|
|
#endif /* _ATHRS26_PHY_H */
|
|
|