mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-29 15:24:36 +02:00
165 lines
4.2 KiB
Diff
165 lines
4.2 KiB
Diff
--- a/drivers/serial/8250.c
|
|
+++ b/drivers/serial/8250.c
|
|
@@ -194,7 +194,7 @@ static const struct serial8250_config ua
|
|
[PORT_16550A] = {
|
|
.name = "16550A",
|
|
.fifo_size = 16,
|
|
- .tx_loadsz = 16,
|
|
+ .tx_loadsz = 8,
|
|
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
|
|
.flags = UART_CAP_FIFO,
|
|
},
|
|
@@ -401,6 +401,10 @@ static unsigned int mem_serial_in(struct
|
|
static void mem_serial_out(struct uart_port *p, int offset, int value)
|
|
{
|
|
offset = map_8250_out_reg(p, offset) << p->regshift;
|
|
+#if defined(CONFIG_JZSOC)
|
|
+ if (offset == (UART_FCR << p->regshift))
|
|
+ value |= 0x10; /* set FCR.UUE */
|
|
+#endif
|
|
writeb(value, p->membase + offset);
|
|
}
|
|
|
|
@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u
|
|
serial_unlink_irq_chain(up);
|
|
}
|
|
|
|
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
|
|
+static unsigned short quot1[3] = {0}; /* quot[0]:baud_div, quot[1]:umr, quot[2]:uacr */
|
|
+static unsigned short * serial8250_get_divisor(struct uart_port *port, unsigned int baud)
|
|
+{
|
|
+ int err, sum, i, j;
|
|
+ int a[12], b[12];
|
|
+ unsigned short div, umr, uacr;
|
|
+ unsigned short umr_best, div_best, uacr_best;
|
|
+ long long t0, t1, t2, t3;
|
|
+
|
|
+ sum = 0;
|
|
+ umr_best = div_best = uacr_best = 0;
|
|
+ div = 1;
|
|
+
|
|
+ if ((port->uartclk % (16 * baud)) == 0) {
|
|
+ quot1[0] = port->uartclk / (16 * baud);
|
|
+ quot1[1] = 16;
|
|
+ quot1[2] = 0;
|
|
+ return quot1;
|
|
+ }
|
|
+
|
|
+ while (1) {
|
|
+ umr = port->uartclk / (baud * div);
|
|
+ if (umr > 32) {
|
|
+ div++;
|
|
+ continue;
|
|
+ }
|
|
+ if (umr < 4) {
|
|
+ break;
|
|
+ }
|
|
+ for (i = 0; i < 12; i++) {
|
|
+ a[i] = umr;
|
|
+ b[i] = 0;
|
|
+ sum = 0;
|
|
+ for (j = 0; j <= i; j++) {
|
|
+ sum += a[j];
|
|
+ }
|
|
+
|
|
+ /* the precision could be 1/2^(36) due to the value of t0 */
|
|
+ t0 = 0x1000000000LL;
|
|
+ t1 = (i + 1) * t0;
|
|
+ t2 = (sum * div) * t0;
|
|
+ t3 = div * t0;
|
|
+ do_div(t1, baud);
|
|
+ do_div(t2, port->uartclk);
|
|
+ do_div(t3, (2 * port->uartclk));
|
|
+ err = t1 - t2 - t3;
|
|
+
|
|
+ if (err > 0) {
|
|
+ a[i] += 1;
|
|
+ b[i] = 1;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ uacr = 0;
|
|
+ for (i = 0; i < 12; i++) {
|
|
+ if (b[i] == 1) {
|
|
+ uacr |= 1 << i;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* the best value of umr should be near 16, and the value of uacr should better be smaller */
|
|
+ if (abs(umr - 16) < abs(umr_best - 16) || (abs(umr - 16) == abs(umr_best - 16) && uacr_best > uacr)) {
|
|
+ div_best = div;
|
|
+ umr_best = umr;
|
|
+ uacr_best = uacr;
|
|
+ }
|
|
+ div++;
|
|
+ }
|
|
+
|
|
+ quot1[0] = div_best;
|
|
+ quot1[1] = umr_best;
|
|
+ quot1[2] = uacr_best;
|
|
+
|
|
+ return quot1;
|
|
+}
|
|
+#else
|
|
static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
|
|
{
|
|
unsigned int quot;
|
|
@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis
|
|
|
|
return quot;
|
|
}
|
|
+#endif
|
|
|
|
static void
|
|
serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port
|
|
unsigned char cval, fcr = 0;
|
|
unsigned long flags;
|
|
unsigned int baud, quot;
|
|
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
|
|
+ unsigned short *quot1;
|
|
+#endif
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
@@ -2273,7 +2358,12 @@ serial8250_set_termios(struct uart_port
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
|
|
+ quot1 = serial8250_get_divisor(port, baud);
|
|
+ quot = quot1[0]; /* not usefull, just let gcc happy */
|
|
+#else
|
|
quot = serial8250_get_divisor(port, baud);
|
|
+#endif
|
|
|
|
/*
|
|
* Oxford Semi 952 rev B workaround
|
|
@@ -2351,6 +2441,10 @@ serial8250_set_termios(struct uart_port
|
|
if (up->capabilities & UART_CAP_UUE)
|
|
up->ier |= UART_IER_UUE | UART_IER_RTOIE;
|
|
|
|
+#ifdef CONFIG_JZSOC
|
|
+ up->ier |= UART_IER_RTOIE; /* Set this flag, or very slow */
|
|
+#endif
|
|
+
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
if (up->capabilities & UART_CAP_EFR) {
|
|
@@ -2385,7 +2479,15 @@ serial8250_set_termios(struct uart_port
|
|
serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
|
|
}
|
|
|
|
+#if defined(CONFIG_JZSOC) && !defined(CONFIG_SOC_JZ4730)
|
|
+#define UART_UMR 9
|
|
+#define UART_UACR 10
|
|
+ serial_dl_write(up, quot1[0]);
|
|
+ serial_outp(up, UART_UMR, quot1[1]);
|
|
+ serial_outp(up, UART_UACR, quot1[2]);
|
|
+#else
|
|
serial_dl_write(up, quot);
|
|
+#endif
|
|
|
|
/*
|
|
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
|