qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 14:40:17 +02:00
Code
5e4cd88141
openwrt-xburst/target/linux/generic/patches-3.3/132-solos-dma.patch
juhosg 170303015d kernel: add solos-pci update for 3.3 
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.

Submitted more for the benefit of the AA branch than for trunk.

[juhosg: refresh the patch with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 10:38:33 +00:00

443 lines
14 KiB
Diff
Raw Blame History

commit b4bd8ad9bb311e8536f726f7a633620ccd358cde
Author: David Woodhouse <dwmw2@infradead.org>
Date: Thu May 24 04:58:27 2012 +0000
solos-pci: Fix DMA support
DMA support has finally made its way to the top of the TODO list, having
realised that a Geode using MMIO can't keep up with two ADSL2+ lines
each running at 21Mb/s.
This patch fixes a couple of bugs in the DMA support in the driver, so
once the corresponding FPGA update is complete and tested everything
should work properly.
We weren't storing the currently-transmitting skb, so we were never
unmapping it and never freeing/popping it when the TX was done.
And the addition of pci_set_master() is fairly self-explanatory.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 152a2a8b5e1d4cbe91a7c66f1028db15164a3766
Author: David Woodhouse <David.Woodhouse@intel.com>
Date: Wed Dec 19 11:01:21 2012 +0000
solos-pci: ensure all TX packets are aligned to 4 bytes
The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
if skb->data isn't suitably aligned.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 13af816469db3449c072afbae6c4c1bd9ccecccb
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:20 2012 +0000
solos-pci: add firmware upgrade support for new models
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7fbdadb5e951e4f0c0fc991ff5f50295568786e6
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:19 2012 +0000
solos-pci: remove superfluous debug output
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f9baad02e7411d9f38d5ebe1a1cdcde4ceec100d
Author: Nathan Williams <nathan@traverse.com.au>
Date: Wed Dec 19 11:01:18 2012 +0000
solos-pci: add GPIO support for newer versions on Geos board
dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
only register on newer boards, register under PCI device instead of
duplicating them under each ATM device.
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit cae49ede00ec3d0cda290b03fee55b72b49efc11
Author: David Woodhouse <dwmw2@infradead.org>
Date: Tue Dec 11 14:57:14 2012 +0000
solos-pci: fix double-free of TX skb in DMA mode
We weren't clearing card->tx_skb[port] when processing the TX done interrupt.
If there wasn't another skb ready to transmit immediately, this led to a
double-free because we'd free it *again* next time we did have a packet to
send.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
==
There is a typo here so we do a double lock instead of an unlock.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Only needed in linux-next. Introduced in f9baad02e7411d9 [14/17]
solos-pci: add GPIO support for newer versions on Geos board
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -42,7 +42,8 @@
#include <linux/swab.h>
#include <linux/slab.h>
-#define VERSION "0.07"
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
#define PTAG "solos-pci"
#define CONFIG_RAM_SIZE 128
@@ -56,16 +57,21 @@
#define FLASH_BUSY 0x60
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
+#define GPIO_STATUS 0x54
+#define DRIVER_VER 0x50
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
#define BUF_SIZE 2048
#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE 528 /* FPGA flash page size*/
-#define SOLOS_PAGE 512 /* Solos flash page size*/
-#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK (256 * 64)
#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -123,11 +129,14 @@ struct solos_card {
struct sk_buff_head cli_queue[4];
struct sk_buff *tx_skb[4];
struct sk_buff *rx_skb[4];
+ unsigned char *dma_bounce;
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
+ int dma_alignment;
int fpga_version;
int buffer_size;
+ int atmel_flash;
};
@@ -452,7 +461,6 @@ static ssize_t console_show(struct devic
len = skb->len;
memcpy(buf, skb->data, len);
- dev_dbg(&card->dev->dev, "len: %d\n", len);
kfree_skb(skb);
return len;
@@ -499,6 +507,78 @@ static ssize_t console_store(struct devi
return err?:count;
}
+struct geos_gpio_attr {
+ struct device_attribute attr;
+ int offset;
+};
+
+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
+ struct geos_gpio_attr gpio_attr_##_name = { \
+ .attr = __ATTR(_name, _mode, _show, _store), \
+ .offset = _offset }
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ if (count != 1 && (count != 2 || buf[1] != '\n'))
+ return -EINVAL;
+
+ spin_lock_irq(&card->param_queue_lock);
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ if (buf[0] == '1') {
+ data32 |= 1 << gattr->offset;
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else if (buf[0] == '0') {
+ data32 &= ~(1 << gattr->offset);
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else {
+ count = -EINVAL;
+ }
+ spin_unlock_irq(&card->param_queue_lock);
+ return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ data32 = (data32 >> gattr->offset) & 1;
+
+ return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = pci_get_drvdata(pdev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ switch (gattr->offset) {
+ case 0:
+ /* HardwareVersion */
+ data32 = data32 & 0x1F;
+ break;
+ case 1:
+ /* HardwareVariant */
+ data32 = (data32 >> 5) & 0x0F;
+ break;
+ }
+ return sprintf(buf, "%d\n", data32);
+}
+
static DEVICE_ATTR(console, 0644, console_show, console_store);
@@ -507,6 +587,14 @@ static DEVICE_ATTR(console, 0644, consol
#include "solos-attrlist.c"
+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
#undef SOLOS_ATTR_RO
#undef SOLOS_ATTR_RW
@@ -523,6 +611,23 @@ static struct attribute_group solos_attr
.name = "parameters",
};
+static struct attribute *gpio_attrs[] = {
+ &gpio_attr_GPIO1.attr.attr,
+ &gpio_attr_GPIO2.attr.attr,
+ &gpio_attr_GPIO3.attr.attr,
+ &gpio_attr_GPIO4.attr.attr,
+ &gpio_attr_GPIO5.attr.attr,
+ &gpio_attr_PushButton.attr.attr,
+ &gpio_attr_HardwareVersion.attr.attr,
+ &gpio_attr_HardwareVariant.attr.attr,
+ NULL
+};
+
+static struct attribute_group gpio_attr_group = {
+ .attrs = gpio_attrs,
+ .name = "gpio",
+};
+
static int flash_upgrade(struct solos_card *card, int chip)
{
const struct firmware *fw;
@@ -534,16 +639,25 @@ static int flash_upgrade(struct solos_ca
switch (chip) {
case 0:
fw_name = "solos-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 1:
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 2:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-db-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -553,7 +667,10 @@ static int flash_upgrade(struct solos_ca
case 3:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -569,6 +686,9 @@ static int flash_upgrade(struct solos_ca
dev_info(&card->dev->dev, "Flash upgrade starting\n");
+ /* New FPGAs require driver version before permitting flash upgrades */
+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
numblocks = fw->size / blocksize;
dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
@@ -598,9 +718,13 @@ static int flash_upgrade(struct solos_ca
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
- /* Copy block to buffer, swapping each 16 bits */
+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */
for(i = 0; i < blocksize; i += 4) {
- uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+ uint32_t word;
+ if (card->atmel_flash)
+ word = swahb32p((uint32_t *)(fw->data + offset + i));
+ else
+ word = *(uint32_t *)(fw->data + offset + i);
if(card->fpga_version > LEGACY_BUFFERS)
iowrite32(word, FLASH_BUF + i);
else
@@ -945,10 +1069,11 @@ static uint32_t fpga_tx(struct solos_car
for (port = 0; tx_pending; tx_pending >>= 1, port++) {
if (tx_pending & 1) {
struct sk_buff *oldskb = card->tx_skb[port];
- if (oldskb)
+ if (oldskb) {
pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
oldskb->len, PCI_DMA_TODEVICE);
-
+ card->tx_skb[port] = NULL;
+ }
spin_lock(&card->tx_queue_lock);
skb = skb_dequeue(&card->tx_queue[port]);
if (!skb)
@@ -960,8 +1085,14 @@ static uint32_t fpga_tx(struct solos_car
tx_started |= 1 << port;
oldskb = skb; /* We're done with this skb already */
} else if (skb && card->using_dma) {
- SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
+ unsigned char *data = skb->data;
+ if ((unsigned long)data & card->dma_alignment) {
+ data = card->dma_bounce + (BUF_SIZE * port);
+ memcpy(data, skb->data, skb->len);
+ }
+ SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data,
skb->len, PCI_DMA_TODEVICE);
+ card->tx_skb[port] = skb;
iowrite32(SKB_CB(skb)->dma_addr,
card->config_regs + TX_DMA_ADDR(port));
}
@@ -1133,17 +1264,33 @@ static int fpga_probe(struct pci_dev *de
db_fpga_upgrade = db_firmware_upgrade = 0;
}
- if (card->fpga_version >= DMA_SUPPORTED){
+ /* Stopped using Atmel flash after 0.03-38 */
+ if (fpga_ver < 39)
+ card->atmel_flash = 1;
+ else
+ card->atmel_flash = 0;
+
+ data32 = ioread32(card->config_regs + PORTS);
+ card->nr_ports = (data32 & 0x000000FF);
+
+ if (card->fpga_version >= DMA_SUPPORTED) {
+ pci_set_master(dev);
card->using_dma = 1;
+ if (1) { /* All known FPGA versions so far */
+ card->dma_alignment = 3;
+ card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL);
+ if (!card->dma_bounce) {
+ dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
+ /* Fallback to MMIO doesn't work */
+ goto out_unmap_both;
+ }
+ }
} else {
card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
- data32 = ioread32(card->config_regs + PORTS);
- card->nr_ports = (data32 & 0x000000FF);
-
pci_set_drvdata(dev, card);
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
@@ -1178,6 +1325,10 @@ static int fpga_probe(struct pci_dev *de
if (err)
goto out_free_irq;
+ if (card->fpga_version >= DMA_SUPPORTED &&
+ sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
+ dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
+
return 0;
out_free_irq:
@@ -1186,6 +1337,7 @@ static int fpga_probe(struct pci_dev *de
tasklet_kill(&card->tlet);
out_unmap_both:
+ kfree(card->dma_bounce);
pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->buffers);
out_unmap_config:
@@ -1288,11 +1440,16 @@ static void fpga_remove(struct pci_dev *
iowrite32(1, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);
+ if (card->fpga_version >= DMA_SUPPORTED)
+ sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
+
atm_remove(card);
free_irq(dev->irq, card);
tasklet_kill(&card->tlet);
+ kfree(card->dma_bounce);
+
/* Release device from reset */
iowrite32(0, card->config_regs + FPGA_MODE);
(void)ioread32(card->config_regs + FPGA_MODE);
View Git Blame Copy Permalink