mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-10 09:05:20 +02:00
d4aeb1b5c8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6848 3c298f89-4303-0410-b956-a3cf2f4a3e73
1050 lines
30 KiB
C
1050 lines
30 KiB
C
/*
|
|
<:copyright-gpl
|
|
Copyright 2002 Broadcom Corp. All Rights Reserved.
|
|
|
|
This program is free software; you can distribute it and/or modify it
|
|
under the terms of the GNU General Public License (Version 2) as
|
|
published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
for more details.
|
|
|
|
You should have received a copy of the GNU General Public License along
|
|
with this program; if not, write to the Free Software Foundation, Inc.,
|
|
59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
:>
|
|
*/
|
|
|
|
/* Description: Serial port driver for the BCM963XX. */
|
|
|
|
#define CARDNAME "bcm963xx_serial driver"
|
|
#define VERSION "2.0"
|
|
#define VER_STR CARDNAME " v" VERSION "\n"
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* for definition of struct console */
|
|
#include <linux/console.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serialP.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <bcmtypes.h>
|
|
#include <board.h>
|
|
#include <bcm_map_part.h>
|
|
#include <bcm_intr.h>
|
|
|
|
static DEFINE_SPINLOCK(bcm963xx_serial_lock);
|
|
|
|
extern void _putc(char);
|
|
extern void _puts(const char *);
|
|
|
|
typedef struct bcm_serial {
|
|
volatile Uart * port;
|
|
int type;
|
|
int flags;
|
|
int irq;
|
|
int baud_base;
|
|
int blocked_open;
|
|
unsigned short close_delay;
|
|
unsigned short closing_wait;
|
|
unsigned short line; /* port/line number */
|
|
unsigned short cflags; /* line configuration flag */
|
|
unsigned short x_char; /* xon/xoff character */
|
|
unsigned short read_status_mask; /* mask for read condition */
|
|
unsigned short ignore_status_mask; /* mask for ignore condition */
|
|
unsigned long event; /* mask used in BH */
|
|
int xmit_head; /* Position of the head */
|
|
int xmit_tail; /* Position of the tail */
|
|
int xmit_cnt; /* Count of the chars in the buffer */
|
|
int count; /* indicates how many times it has been opened */
|
|
int magic;
|
|
|
|
struct async_icount icount; /* keep track of things ... */
|
|
struct tty_struct *tty; /* tty associated */
|
|
struct termios normal_termios;
|
|
|
|
wait_queue_head_t open_wait;
|
|
wait_queue_head_t close_wait;
|
|
|
|
long session; /* Session of opening process */
|
|
long pgrp; /* pgrp of opening process */
|
|
|
|
unsigned char is_initialized;
|
|
} Context;
|
|
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
/* Define bits in the Interrupt Enable register */
|
|
/*---------------------------------------------------------------------*/
|
|
/* Enable receive interrupt */
|
|
#define RXINT (RXFIFONE|RXOVFERR)
|
|
|
|
/* Enable transmit interrupt */
|
|
#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
|
|
|
|
/* Enable receiver line status interrupt */
|
|
#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
|
|
|
|
#define BCM_NUM_UARTS 1
|
|
|
|
#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
|
|
|
|
|
|
static struct bcm_serial multi[BCM_NUM_UARTS];
|
|
static struct bcm_serial *lines[BCM_NUM_UARTS];
|
|
static struct tty_driver *serial_driver;
|
|
static struct termios *serial_termios[BCM_NUM_UARTS];
|
|
static struct termios *serial_termios_locked[BCM_NUM_UARTS];
|
|
|
|
|
|
static void bcm_stop (struct tty_struct *tty);
|
|
static void bcm_start (struct tty_struct *tty);
|
|
static inline void receive_chars (struct bcm_serial * info);
|
|
static int startup (struct bcm_serial *info);
|
|
static void shutdown (struct bcm_serial * info);
|
|
static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
|
|
static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
|
|
static int bcm63xx_cons_write (struct tty_struct *tty,
|
|
const unsigned char *buf, int count);
|
|
static int bcm63xx_cons_write_room (struct tty_struct *tty);
|
|
static int bcm_chars_in_buffer (struct tty_struct *tty);
|
|
static void bcm_flush_buffer (struct tty_struct *tty);
|
|
static void bcm_throttle (struct tty_struct *tty);
|
|
static void bcm_unthrottle (struct tty_struct *tty);
|
|
static void bcm_send_xchar (struct tty_struct *tty, char ch);
|
|
static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
|
|
static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
|
|
static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
|
|
static void send_break (struct bcm_serial *info, int duration);
|
|
static int bcm_ioctl (struct tty_struct * tty, struct file * file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
|
|
static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
|
|
static void bcm_hangup (struct tty_struct *tty);
|
|
static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
|
|
static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
|
|
static int __init bcm63xx_serialinit(void);
|
|
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* rs_stop () and rs_start ()
|
|
*
|
|
* These routines are called before setting or resetting
|
|
* tty->stopped. They enable or disable transmitter interrupts,
|
|
* as necessary.
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static void bcm_stop (struct tty_struct *tty)
|
|
{
|
|
}
|
|
|
|
static void bcm_start (struct tty_struct *tty)
|
|
{
|
|
_puts(CARDNAME " Start\n");
|
|
}
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* receive_char ()
|
|
*
|
|
* This routine deals with inputs from any lines.
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static inline void receive_chars (struct bcm_serial * info)
|
|
{
|
|
struct tty_struct *tty = 0;
|
|
struct async_icount * icount;
|
|
int ignore = 0;
|
|
unsigned short status, tmp;
|
|
UCHAR ch = 0;
|
|
while ((status = info->port->intStatus) & RXINT)
|
|
{
|
|
char flag_char = TTY_NORMAL;
|
|
|
|
if (status & RXFIFONE)
|
|
ch = info->port->Data; // Read the character
|
|
tty = info->tty; /* now tty points to the proper dev */
|
|
icount = &info->icount;
|
|
if (! tty)
|
|
break;
|
|
if (!tty_buffer_request_room(tty, 1))
|
|
break;
|
|
icount->rx++;
|
|
if (status & RXBRK)
|
|
{
|
|
flag_char = TTY_BREAK;
|
|
icount->brk++;
|
|
}
|
|
// keep track of the statistics
|
|
if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
|
|
{
|
|
if (status & RXPARERR) /* parity error */
|
|
icount->parity++;
|
|
else
|
|
if (status & RXFRAMERR) /* frame error */
|
|
icount->frame++;
|
|
if (status & RXOVFERR)
|
|
{
|
|
// Overflow. Reset the RX FIFO
|
|
info->port->fifoctl |= RSTRXFIFOS;
|
|
icount->overrun++;
|
|
}
|
|
// check to see if we should ignore the character
|
|
// and mask off conditions that should be ignored
|
|
if (status & info->ignore_status_mask)
|
|
{
|
|
if (++ignore > 100 )
|
|
break;
|
|
goto ignore_char;
|
|
}
|
|
// Mask off the error conditions we want to ignore
|
|
tmp = status & info->read_status_mask;
|
|
if (tmp & RXPARERR)
|
|
{
|
|
flag_char = TTY_PARITY;
|
|
}
|
|
else
|
|
if (tmp & RXFRAMERR)
|
|
{
|
|
flag_char = TTY_FRAME;
|
|
}
|
|
if (tmp & RXOVFERR)
|
|
{
|
|
tty_insert_flip_char(tty, ch, flag_char);
|
|
ch = 0;
|
|
flag_char = TTY_OVERRUN;
|
|
if (!tty_buffer_request_room(tty, 1))
|
|
break;
|
|
}
|
|
}
|
|
tty_insert_flip_char(tty, ch, flag_char);
|
|
}
|
|
ignore_char:;
|
|
tty_flip_buffer_push(tty);
|
|
tty_schedule_flip(tty);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* bcm_interrupt ()
|
|
*
|
|
* this is the main interrupt routine for the chip.
|
|
* It deals with the multiple ports.
|
|
* ------------------------------------------------------------
|
|
*/
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
|
|
static irqreturn_t bcm_interrupt (int irq, void * dev)
|
|
#else
|
|
static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
|
|
#endif
|
|
{
|
|
struct bcm_serial * info = lines[0];
|
|
UINT16 intStat;
|
|
|
|
/* get pending interrupt flags from UART */
|
|
|
|
/* Mask with only the serial interrupts that are enabled */
|
|
intStat = info->port->intStatus & info->port->intMask;
|
|
while (intStat)
|
|
{
|
|
if (intStat & RXINT)
|
|
receive_chars (info);
|
|
else
|
|
if (intStat & TXINT)
|
|
info->port->intStatus = TXINT;
|
|
else /* don't know what it was, so let's mask it */
|
|
info->port->intMask &= ~intStat;
|
|
|
|
intStat = info->port->intStatus & info->port->intMask;
|
|
}
|
|
|
|
// Clear the interrupt
|
|
BcmHalInterruptEnable (INTERRUPT_ID_UART);
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
|
|
return IRQ_HANDLED;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* startup ()
|
|
*
|
|
* various initialization tasks
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static int startup (struct bcm_serial *info)
|
|
{
|
|
// Port is already started...
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* shutdown ()
|
|
*
|
|
* This routine will shutdown a serial port; interrupts are disabled, and
|
|
* DTR is dropped if the hangup on close termio flag is on.
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static void shutdown (struct bcm_serial * info)
|
|
{
|
|
unsigned long flags;
|
|
if (!info->is_initialized)
|
|
return;
|
|
|
|
spin_lock_irqsave(&bcm963xx_serial_lock, flags);
|
|
|
|
info->port->control &= ~(BRGEN|TXEN|RXEN);
|
|
if (info->tty)
|
|
set_bit (TTY_IO_ERROR, &info->tty->flags);
|
|
info->is_initialized = 0;
|
|
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
}
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* change_speed ()
|
|
*
|
|
* Set the baud rate, character size, parity and stop bits.
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
|
|
{
|
|
unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
|
|
|
|
spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
|
|
switch( cFlag & (CBAUD | CBAUDEX) )
|
|
{
|
|
case B115200:
|
|
ulBaud = 115200;
|
|
break;
|
|
case B57600:
|
|
ulBaud = 57600;
|
|
break;
|
|
case B38400:
|
|
ulBaud = 38400;
|
|
break;
|
|
case B19200:
|
|
ulBaud = 19200;
|
|
break;
|
|
case B9600:
|
|
ulBaud = 9600;
|
|
break;
|
|
case B4800:
|
|
ulBaud = 4800;
|
|
break;
|
|
case B2400:
|
|
ulBaud = 2400;
|
|
break;
|
|
case B1800:
|
|
ulBaud = 1800;
|
|
break;
|
|
case B1200:
|
|
ulBaud = 1200;
|
|
break;
|
|
case B600:
|
|
ulBaud = 600;
|
|
break;
|
|
case B300:
|
|
ulBaud = 300;
|
|
break;
|
|
case B200:
|
|
ulBaud = 200;
|
|
break;
|
|
case B150:
|
|
ulBaud = 150;
|
|
break;
|
|
case B134:
|
|
ulBaud = 134;
|
|
break;
|
|
case B110:
|
|
ulBaud = 110;
|
|
break;
|
|
case B75:
|
|
ulBaud = 75;
|
|
break;
|
|
case B50:
|
|
ulBaud = 50;
|
|
break;
|
|
default:
|
|
ulBaud = 115200;
|
|
break;
|
|
}
|
|
|
|
/* Calculate buad rate. */
|
|
ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
|
|
ulTmp = (ulClockFreqHz / ulBaud) / 16;
|
|
if( ulTmp & 0x01 )
|
|
ulTmp /= 2; /* Rounding up, so sub is already accounted for */
|
|
else
|
|
ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
|
|
pUart->baudword = ulTmp;
|
|
|
|
/* Set character size, stop bits and parity. */
|
|
switch( cFlag & CSIZE )
|
|
{
|
|
case CS5:
|
|
ulTmp = BITS5SYM; /* select transmit 5 bit data size */
|
|
break;
|
|
case CS6:
|
|
ulTmp = BITS6SYM; /* select transmit 6 bit data size */
|
|
break;
|
|
case CS7:
|
|
ulTmp = BITS7SYM; /* select transmit 7 bit data size */
|
|
break;
|
|
default:
|
|
ulTmp = BITS8SYM; /* select transmit 8 bit data size */
|
|
break;
|
|
}
|
|
if( cFlag & CSTOPB )
|
|
ulTmp |= TWOSTOP; /* select 2 stop bits */
|
|
else
|
|
ulTmp |= ONESTOP; /* select one stop bit */
|
|
|
|
/* Write these values into the config reg. */
|
|
pUart->config = ulTmp;
|
|
pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
|
|
switch( cFlag & (PARENB | PARODD) )
|
|
{
|
|
case PARENB|PARODD:
|
|
pUart->control |= RXPARITYEN | TXPARITYEN;
|
|
break;
|
|
case PARENB:
|
|
pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
|
|
break;
|
|
default:
|
|
pUart->control |= 0;
|
|
break;
|
|
}
|
|
|
|
/* Reset and flush uart */
|
|
pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
|
|
}
|
|
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* bcm_flush_char ()
|
|
*
|
|
* Nothing to flush. Polled I/O is used.
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
|
|
{
|
|
}
|
|
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* bcm63xx_cons_write ()
|
|
*
|
|
* Main output routine using polled I/O.
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static int bcm63xx_cons_write (struct tty_struct *tty,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
int c;
|
|
|
|
for (c = 0; c < count; c++)
|
|
_putc(buf[c]);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* bcm63xx_cons_write_room ()
|
|
*
|
|
* Compute the amount of space available for writing.
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static int bcm63xx_cons_write_room (struct tty_struct *tty)
|
|
{
|
|
/* Pick a number. Any number. Polled I/O is used. */
|
|
return 1024;
|
|
}
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* bcm_chars_in_buffer ()
|
|
*
|
|
* compute the amount of char left to be transmitted
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static int bcm_chars_in_buffer (struct tty_struct *tty)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* -------------------------------------------------------------------
|
|
* bcm_flush_buffer ()
|
|
*
|
|
* Empty the output buffer
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
static void bcm_flush_buffer (struct tty_struct *tty)
|
|
{
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* bcm_throttle () and bcm_unthrottle ()
|
|
*
|
|
* This routine is called by the upper-layer tty layer to signal that
|
|
* incoming characters should be throttled (or not).
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static void bcm_throttle (struct tty_struct *tty)
|
|
{
|
|
struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
|
|
if (I_IXOFF(tty))
|
|
info->x_char = STOP_CHAR(tty);
|
|
}
|
|
|
|
static void bcm_unthrottle (struct tty_struct *tty)
|
|
{
|
|
struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
|
|
if (I_IXOFF(tty))
|
|
{
|
|
if (info->x_char)
|
|
info->x_char = 0;
|
|
else
|
|
info->x_char = START_CHAR(tty);
|
|
}
|
|
}
|
|
|
|
static void bcm_send_xchar (struct tty_struct *tty, char ch)
|
|
{
|
|
struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
|
|
info->x_char = ch;
|
|
if (ch)
|
|
bcm_start (info->tty);
|
|
}
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* rs_ioctl () and friends
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
|
|
{
|
|
struct serial_struct tmp;
|
|
|
|
if (!retinfo)
|
|
return -EFAULT;
|
|
|
|
memset (&tmp, 0, sizeof(tmp));
|
|
tmp.type = info->type;
|
|
tmp.line = info->line;
|
|
tmp.port = (int) info->port;
|
|
tmp.irq = info->irq;
|
|
tmp.flags = 0;
|
|
tmp.baud_base = info->baud_base;
|
|
tmp.close_delay = info->close_delay;
|
|
tmp.closing_wait = info->closing_wait;
|
|
|
|
return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
|
|
}
|
|
|
|
static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
|
|
{
|
|
struct serial_struct new_serial;
|
|
struct bcm_serial old_info;
|
|
int retval = 0;
|
|
|
|
if (!new_info)
|
|
return -EFAULT;
|
|
|
|
copy_from_user (&new_serial, new_info, sizeof(new_serial));
|
|
old_info = *info;
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
|
|
if (info->count > 1)
|
|
return -EBUSY;
|
|
|
|
/* OK, past this point, all the error checking has been done.
|
|
* At this point, we start making changes.....
|
|
*/
|
|
info->baud_base = new_serial.baud_base;
|
|
info->type = new_serial.type;
|
|
info->close_delay = new_serial.close_delay;
|
|
info->closing_wait = new_serial.closing_wait;
|
|
retval = startup (info);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* get_lsr_info - get line status register info
|
|
*
|
|
* Purpose: Let user call ioctl() to get info when the UART physically
|
|
* is emptied. On bus types like RS485, the transmitter must
|
|
* release the bus after transmitting. This must be done when
|
|
* the transmit shift register is empty, not be done when the
|
|
* transmit holding register is empty. This functionality
|
|
* allows an RS485 driver to be written in user space.
|
|
*/
|
|
static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
|
|
{
|
|
return( 0 );
|
|
}
|
|
|
|
/*
|
|
* This routine sends a break character out the serial port.
|
|
*/
|
|
static void send_break (struct bcm_serial *info, int duration)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!info->port)
|
|
return;
|
|
|
|
current->state = TASK_INTERRUPTIBLE;
|
|
|
|
/*save_flags (flags);
|
|
cli();*/
|
|
spin_lock_irqsave(&bcm963xx_serial_lock, flags);
|
|
|
|
info->port->control |= XMITBREAK;
|
|
schedule_timeout(duration);
|
|
info->port->control &= ~XMITBREAK;
|
|
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
//restore_flags (flags);
|
|
}
|
|
|
|
static int bcm_ioctl (struct tty_struct * tty, struct file * file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int error;
|
|
struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
|
|
int retval;
|
|
|
|
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
|
|
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
|
|
(cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
|
|
{
|
|
if (tty->flags & (1 << TTY_IO_ERROR))
|
|
return -EIO;
|
|
}
|
|
switch (cmd)
|
|
{
|
|
|
|
case TCSBRK: /* SVID version: non-zero arg --> no break */
|
|
retval = tty_check_change (tty);
|
|
if (retval)
|
|
return retval;
|
|
tty_wait_until_sent (tty, 0);
|
|
if (!arg)
|
|
send_break (info, HZ/4); /* 1/4 second */
|
|
return 0;
|
|
|
|
case TCSBRKP: /* support for POSIX tcsendbreak() */
|
|
retval = tty_check_change (tty);
|
|
if (retval)
|
|
return retval;
|
|
tty_wait_until_sent (tty, 0);
|
|
send_break (info, arg ? arg*(HZ/10) : HZ/4);
|
|
return 0;
|
|
|
|
case TIOCGSOFTCAR:
|
|
error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
|
|
if (!error)
|
|
return -EFAULT;
|
|
else
|
|
{
|
|
put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
|
|
return 0;
|
|
}
|
|
|
|
case TIOCSSOFTCAR:
|
|
error = get_user (arg, (unsigned long *)arg);
|
|
if (error)
|
|
return error;
|
|
tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
|
|
return 0;
|
|
|
|
case TIOCGSERIAL:
|
|
error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
|
|
if (!error)
|
|
return -EFAULT;
|
|
else
|
|
return get_serial_info (info, (struct serial_struct *)arg);
|
|
|
|
case TIOCSSERIAL:
|
|
return set_serial_info (info, (struct serial_struct *) arg);
|
|
|
|
case TIOCSERGETLSR: /* Get line status register */
|
|
error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
|
|
if (!error)
|
|
return -EFAULT;
|
|
else
|
|
return get_lsr_info (info, (unsigned int *)arg);
|
|
|
|
case TIOCSERGSTRUCT:
|
|
error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
|
|
if (!error)
|
|
return -EFAULT;
|
|
else
|
|
{
|
|
copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
|
|
return 0;
|
|
}
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
|
|
{
|
|
struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
|
|
|
|
if( tty->termios->c_cflag != old_termios->c_cflag )
|
|
change_speed (info->port, tty->termios->c_cflag);
|
|
}
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* bcm63xx_cons_close()
|
|
*
|
|
* This routine is called when the serial port gets closed. First, we
|
|
* wait for the last remaining data to be sent. Then, we turn off
|
|
* the transmit enable and receive enable flags.
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (!info)
|
|
return;
|
|
|
|
/*save_flags (flags);
|
|
cli();*/
|
|
spin_lock_irqsave(&bcm963xx_serial_lock, flags);
|
|
|
|
if (tty_hung_up_p (filp))
|
|
{
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
//restore_flags (flags);
|
|
return;
|
|
}
|
|
|
|
if ((tty->count == 1) && (info->count != 1))
|
|
{
|
|
|
|
/* Uh, oh. tty->count is 1, which means that the tty
|
|
* structure will be freed. Info->count should always
|
|
* be one in these conditions. If it's greater than
|
|
* one, we've got real problems, since it means the
|
|
* serial port won't be shutdown.
|
|
*/
|
|
printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
|
|
"info->count is %d\n", info->count);
|
|
info->count = 1;
|
|
}
|
|
|
|
if (--info->count < 0)
|
|
{
|
|
printk("ds_close: bad serial port count for ttys%d: %d\n",
|
|
info->line, info->count);
|
|
info->count = 0;
|
|
}
|
|
|
|
if (info->count)
|
|
{
|
|
//restore_flags (flags);
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Now we wait for the transmit buffer to clear; and we notify
|
|
* the line discipline to only process XON/XOFF characters.
|
|
*/
|
|
tty->closing = 1;
|
|
|
|
/* At this point we stop accepting input. To do this, we
|
|
* disable the receive line status interrupts.
|
|
*/
|
|
shutdown (info);
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
|
|
if (tty->driver->flush_buffer)
|
|
tty->driver->flush_buffer (tty);
|
|
#else
|
|
if (tty->driver.flush_buffer)
|
|
tty->driver.flush_buffer (tty);
|
|
#endif
|
|
if (tty->ldisc.flush_buffer)
|
|
tty->ldisc.flush_buffer (tty);
|
|
|
|
tty->closing = 0;
|
|
info->event = 0;
|
|
info->tty = 0;
|
|
if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
|
|
{
|
|
if (tty->ldisc.close)
|
|
(tty->ldisc.close)(tty);
|
|
tty->ldisc = *tty_ldisc_get(N_TTY);
|
|
tty->termios->c_line = N_TTY;
|
|
if (tty->ldisc.open)
|
|
(tty->ldisc.open)(tty);
|
|
}
|
|
if (info->blocked_open)
|
|
{
|
|
if (info->close_delay)
|
|
{
|
|
current->state = TASK_INTERRUPTIBLE;
|
|
schedule_timeout(info->close_delay);
|
|
}
|
|
wake_up_interruptible (&info->open_wait);
|
|
}
|
|
wake_up_interruptible (&info->close_wait);
|
|
|
|
//restore_flags (flags);
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
|
|
*/
|
|
static void bcm_hangup (struct tty_struct *tty)
|
|
{
|
|
|
|
struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
|
|
|
|
shutdown (info);
|
|
info->event = 0;
|
|
info->count = 0;
|
|
info->tty = 0;
|
|
wake_up_interruptible (&info->open_wait);
|
|
}
|
|
|
|
/*
|
|
* ------------------------------------------------------------
|
|
* rs_open() and friends
|
|
* ------------------------------------------------------------
|
|
*/
|
|
static int block_til_ready (struct tty_struct *tty, struct file *filp,
|
|
struct bcm_serial *info)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This routine is called whenever a serial port is opened. It
|
|
* enables interrupts for a serial port. It also performs the
|
|
* serial-specific initialization for the tty structure.
|
|
*/
|
|
static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
|
|
{
|
|
struct bcm_serial *info;
|
|
int retval, line;
|
|
|
|
// Make sure we're only opening on of the ports we support
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
|
|
line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
|
|
#else
|
|
line = MINOR(tty->device) - tty->driver.minor_start;
|
|
#endif
|
|
|
|
if ((line < 0) || (line >= BCM_NUM_UARTS))
|
|
return -ENODEV;
|
|
|
|
info = lines[line];
|
|
|
|
tty->low_latency=1;
|
|
info->port->intMask = 0; /* Clear any pending interrupts */
|
|
info->port->intMask = RXINT; /* Enable RX */
|
|
|
|
info->count++;
|
|
tty->driver_data = info;
|
|
info->tty = tty;
|
|
BcmHalInterruptEnable (INTERRUPT_ID_UART);
|
|
|
|
// Start up serial port
|
|
retval = startup (info);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = block_til_ready (tty, filp, info);
|
|
if (retval)
|
|
return retval;
|
|
|
|
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
|
|
info->pgrp = process_group(current);
|
|
info->session = current->signal->session;
|
|
#else
|
|
info->session = current->session;
|
|
info->pgrp = current->pgrp;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct tty_operations rs_ops = {
|
|
.open = bcm63xx_cons_open,
|
|
.close = bcm63xx_cons_close,
|
|
.write = bcm63xx_cons_write,
|
|
.flush_chars = bcm63xx_cons_flush_chars,
|
|
.write_room = bcm63xx_cons_write_room,
|
|
.chars_in_buffer = bcm_chars_in_buffer,
|
|
.flush_buffer = bcm_flush_buffer,
|
|
.ioctl = bcm_ioctl,
|
|
.throttle = bcm_throttle,
|
|
.unthrottle = bcm_unthrottle,
|
|
.send_xchar = bcm_send_xchar,
|
|
.set_termios = bcm_set_termios,
|
|
.stop = bcm_stop,
|
|
.start = bcm_start,
|
|
.hangup = bcm_hangup,
|
|
};
|
|
|
|
/* --------------------------------------------------------------------------
|
|
Name: bcm63xx_serialinit
|
|
Purpose: Initialize our BCM63xx serial driver
|
|
-------------------------------------------------------------------------- */
|
|
static int __init bcm63xx_serialinit(void)
|
|
{
|
|
int i, flags;
|
|
struct bcm_serial * info;
|
|
|
|
// Print the driver version information
|
|
printk(VER_STR);
|
|
serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
|
|
if (!serial_driver)
|
|
return -ENOMEM;
|
|
|
|
serial_driver->owner = THIS_MODULE;
|
|
// serial_driver->devfs_name = "tts/";
|
|
// serial_driver.magic = TTY_DRIVER_MAGIC;
|
|
serial_driver->name = "ttyS";
|
|
serial_driver->major = TTY_MAJOR;
|
|
serial_driver->minor_start = 64;
|
|
// serial_driver.num = BCM_NUM_UARTS;
|
|
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
serial_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
serial_driver->init_termios = tty_std_termios;
|
|
serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
serial_driver->flags = TTY_DRIVER_REAL_RAW;
|
|
|
|
serial_driver->termios = serial_termios;
|
|
serial_driver->termios_locked = serial_termios_locked;
|
|
|
|
tty_set_operations(serial_driver, &rs_ops);
|
|
|
|
if (tty_register_driver (serial_driver))
|
|
panic("Couldn't register serial driver\n");
|
|
|
|
//save_flags(flags); cli();
|
|
spin_lock_irqsave(&bcm963xx_serial_lock, flags);
|
|
|
|
for (i = 0; i < BCM_NUM_UARTS; i++)
|
|
{
|
|
info = &multi[i];
|
|
lines[i] = info;
|
|
info->magic = SERIAL_MAGIC;
|
|
info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
|
|
info->tty = 0;
|
|
info->irq = (2 - i) + 8;
|
|
info->line = i;
|
|
info->close_delay = 50;
|
|
info->closing_wait = 3000;
|
|
info->x_char = 0;
|
|
info->event = 0;
|
|
info->count = 0;
|
|
info->blocked_open = 0;
|
|
info->normal_termios = serial_driver->init_termios;
|
|
init_waitqueue_head(&info->open_wait);
|
|
init_waitqueue_head(&info->close_wait);
|
|
|
|
/* If we are pointing to address zero then punt - not correctly
|
|
* set up in setup.c to handle this.
|
|
*/
|
|
if (! info->port)
|
|
return 0;
|
|
BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
|
|
}
|
|
|
|
/* order matters here... the trick is that flags
|
|
* is updated... in request_irq - to immediatedly obliterate
|
|
* it is unwise.
|
|
*/
|
|
spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
module_init(bcm63xx_serialinit);
|
|
|
|
/* --------------------------------------------------------------------------
|
|
Name: bcm_console_print
|
|
Purpose: bcm_console_print is registered for printk.
|
|
The console_lock must be held when we get here.
|
|
-------------------------------------------------------------------------- */
|
|
static void bcm_console_print (struct console * cons, const char * str,
|
|
unsigned int count)
|
|
{
|
|
unsigned int i;
|
|
//_puts(str);
|
|
for(i=0; i<count; i++, str++)
|
|
{
|
|
_putc(*str);
|
|
if (*str == 10)
|
|
{
|
|
_putc(13);
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct tty_driver * bcm_console_device(struct console * c, int *index)
|
|
{
|
|
*index = c->index;
|
|
return serial_driver;
|
|
}
|
|
|
|
static int __init bcm_console_setup(struct console * co, char * options)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct console bcm_sercons = {
|
|
.name = "ttyS",
|
|
.write = bcm_console_print,
|
|
.device = bcm_console_device,
|
|
.setup = bcm_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
};
|
|
|
|
static int __init bcm63xx_console_init(void)
|
|
{
|
|
register_console(&bcm_sercons);
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(bcm63xx_console_init);
|