mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 05:42:04 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24858 3c298f89-4303-0410-b956-a3cf2f4a3e73
271 lines
8.8 KiB
Diff
271 lines
8.8 KiB
Diff
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
|
|
@@ -961,18 +961,6 @@ static void ar5008_hw_rfbus_done(struct
|
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
|
|
}
|
|
|
|
-static void ar5008_hw_enable_rfkill(struct ath_hw *ah)
|
|
-{
|
|
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
|
|
- AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
|
|
-
|
|
- REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
|
|
- AR_GPIO_INPUT_MUX2_RFSILENT);
|
|
-
|
|
- ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
|
|
- REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
|
|
-}
|
|
-
|
|
static void ar5008_restore_chainmask(struct ath_hw *ah)
|
|
{
|
|
int rx_chainmask = ah->rxchainmask;
|
|
@@ -1629,7 +1617,6 @@ void ar5008_hw_attach_phy_ops(struct ath
|
|
priv_ops->set_delta_slope = ar5008_hw_set_delta_slope;
|
|
priv_ops->rfbus_req = ar5008_hw_rfbus_req;
|
|
priv_ops->rfbus_done = ar5008_hw_rfbus_done;
|
|
- priv_ops->enable_rfkill = ar5008_hw_enable_rfkill;
|
|
priv_ops->restore_chainmask = ar5008_restore_chainmask;
|
|
priv_ops->set_diversity = ar5008_set_diversity;
|
|
priv_ops->do_getnf = ar5008_hw_do_getnf;
|
|
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
|
|
@@ -745,28 +745,6 @@ static void ar9003_hw_rfbus_done(struct
|
|
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
|
|
}
|
|
|
|
-/*
|
|
- * Set the interrupt and GPIO values so the ISR can disable RF
|
|
- * on a switch signal. Assumes GPIO port and interrupt polarity
|
|
- * are set prior to call.
|
|
- */
|
|
-static void ar9003_hw_enable_rfkill(struct ath_hw *ah)
|
|
-{
|
|
- /* Connect rfsilent_bb_l to baseband */
|
|
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
|
|
- AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
|
|
- /* Set input mux for rfsilent_bb_l to GPIO #0 */
|
|
- REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
|
|
- AR_GPIO_INPUT_MUX2_RFSILENT);
|
|
-
|
|
- /*
|
|
- * Configure the desired GPIO port for input and
|
|
- * enable baseband rf silence.
|
|
- */
|
|
- ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
|
|
- REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
|
|
-}
|
|
-
|
|
static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
|
|
{
|
|
u32 v = REG_READ(ah, AR_PHY_CCK_DETECT);
|
|
@@ -1203,7 +1181,6 @@ void ar9003_hw_attach_phy_ops(struct ath
|
|
priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
|
|
priv_ops->rfbus_req = ar9003_hw_rfbus_req;
|
|
priv_ops->rfbus_done = ar9003_hw_rfbus_done;
|
|
- priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
|
|
priv_ops->set_diversity = ar9003_hw_set_diversity;
|
|
priv_ops->ani_control = ar9003_hw_ani_control;
|
|
priv_ops->do_getnf = ar9003_hw_do_getnf;
|
|
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
|
|
@@ -189,6 +189,7 @@ struct ath_txq {
|
|
struct list_head axq_q;
|
|
spinlock_t axq_lock;
|
|
u32 axq_depth;
|
|
+ u32 axq_ampdu_depth;
|
|
bool stopped;
|
|
bool axq_tx_inprogress;
|
|
struct list_head axq_acq;
|
|
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
|
|
@@ -223,11 +223,6 @@ static inline void ath9k_hw_rfbus_done(s
|
|
return ath9k_hw_private_ops(ah)->rfbus_done(ah);
|
|
}
|
|
|
|
-static inline void ath9k_enable_rfkill(struct ath_hw *ah)
|
|
-{
|
|
- return ath9k_hw_private_ops(ah)->enable_rfkill(ah);
|
|
-}
|
|
-
|
|
static inline void ath9k_hw_restore_chainmask(struct ath_hw *ah)
|
|
{
|
|
if (!ath9k_hw_private_ops(ah)->restore_chainmask)
|
|
--- a/drivers/net/wireless/ath/ath9k/hw.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/hw.c
|
|
@@ -491,6 +491,17 @@ static int __ath9k_hw_init(struct ath_hw
|
|
if (ah->hw_version.devid == AR5416_AR9100_DEVID)
|
|
ah->hw_version.macVersion = AR_SREV_VERSION_9100;
|
|
|
|
+ ath9k_hw_read_revisions(ah);
|
|
+
|
|
+ /*
|
|
+ * Read back AR_WA into a permanent copy and set bits 14 and 17.
|
|
+ * We need to do this to avoid RMW of this register. We cannot
|
|
+ * read the reg when chip is asleep.
|
|
+ */
|
|
+ ah->WARegVal = REG_READ(ah, AR_WA);
|
|
+ ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
|
|
+ AR_WA_ASPM_TIMER_BASED_DISABLE);
|
|
+
|
|
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
|
|
ath_err(common, "Couldn't reset chip\n");
|
|
return -EIO;
|
|
@@ -559,14 +570,6 @@ static int __ath9k_hw_init(struct ath_hw
|
|
|
|
ath9k_hw_init_mode_regs(ah);
|
|
|
|
- /*
|
|
- * Read back AR_WA into a permanent copy and set bits 14 and 17.
|
|
- * We need to do this to avoid RMW of this register. We cannot
|
|
- * read the reg when chip is asleep.
|
|
- */
|
|
- ah->WARegVal = REG_READ(ah, AR_WA);
|
|
- ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
|
|
- AR_WA_ASPM_TIMER_BASED_DISABLE);
|
|
|
|
if (ah->is_pciexpress)
|
|
ath9k_hw_configpcipowersave(ah, 0, 0);
|
|
@@ -1078,8 +1081,6 @@ static bool ath9k_hw_set_reset_power_on(
|
|
return false;
|
|
}
|
|
|
|
- ath9k_hw_read_revisions(ah);
|
|
-
|
|
return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
|
|
}
|
|
|
|
@@ -1399,7 +1400,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
|
|
ath9k_hw_init_qos(ah);
|
|
|
|
if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
|
|
- ath9k_enable_rfkill(ah);
|
|
+ ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
|
|
|
|
ath9k_hw_init_global_settings(ah);
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/hw.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/hw.h
|
|
@@ -576,7 +576,6 @@ struct ath_hw_private_ops {
|
|
void (*set_delta_slope)(struct ath_hw *ah, struct ath9k_channel *chan);
|
|
bool (*rfbus_req)(struct ath_hw *ah);
|
|
void (*rfbus_done)(struct ath_hw *ah);
|
|
- void (*enable_rfkill)(struct ath_hw *ah);
|
|
void (*restore_chainmask)(struct ath_hw *ah);
|
|
void (*set_diversity)(struct ath_hw *ah, bool value);
|
|
u32 (*compute_pll_control)(struct ath_hw *ah,
|
|
--- a/drivers/net/wireless/ath/ath9k/xmit.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
|
|
@@ -838,7 +838,7 @@ static void ath_tx_sched_aggr(struct ath
|
|
ath_tx_txqaddbuf(sc, txq, &bf_q);
|
|
TX_STAT_INC(txq->axq_qnum, a_aggr);
|
|
|
|
- } while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
|
|
+ } while (txq->axq_ampdu_depth < ATH_AGGR_MIN_QDEPTH &&
|
|
status != ATH_AGGR_BAW_CLOSED);
|
|
}
|
|
|
|
@@ -999,6 +999,7 @@ struct ath_txq *ath_txq_setup(struct ath
|
|
INIT_LIST_HEAD(&txq->axq_acq);
|
|
spin_lock_init(&txq->axq_lock);
|
|
txq->axq_depth = 0;
|
|
+ txq->axq_ampdu_depth = 0;
|
|
txq->axq_tx_inprogress = false;
|
|
sc->tx.txqsetup |= 1<<qnum;
|
|
|
|
@@ -1068,6 +1069,12 @@ int ath_cabq_update(struct ath_softc *sc
|
|
return 0;
|
|
}
|
|
|
|
+static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
|
|
+{
|
|
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
|
|
+ return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
|
|
+}
|
|
+
|
|
/*
|
|
* Drain a given TX queue (could be Beacon or Data)
|
|
*
|
|
@@ -1126,7 +1133,8 @@ void ath_draintxq(struct ath_softc *sc,
|
|
}
|
|
|
|
txq->axq_depth--;
|
|
-
|
|
+ if (bf_is_ampdu_not_probing(bf))
|
|
+ txq->axq_ampdu_depth--;
|
|
spin_unlock_bh(&txq->axq_lock);
|
|
|
|
if (bf_isampdu(bf))
|
|
@@ -1316,6 +1324,8 @@ static void ath_tx_txqaddbuf(struct ath_
|
|
ath9k_hw_txstart(ah, txq->axq_qnum);
|
|
}
|
|
txq->axq_depth++;
|
|
+ if (bf_is_ampdu_not_probing(bf))
|
|
+ txq->axq_ampdu_depth++;
|
|
}
|
|
|
|
static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
|
|
@@ -1336,7 +1346,7 @@ static void ath_tx_send_ampdu(struct ath
|
|
*/
|
|
if (!list_empty(&tid->buf_q) || tid->paused ||
|
|
!BAW_WITHIN(tid->seq_start, tid->baw_size, fi->seqno) ||
|
|
- txctl->txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) {
|
|
+ txctl->txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) {
|
|
/*
|
|
* Add this frame to software queue for scheduling later
|
|
* for aggregation.
|
|
@@ -2040,6 +2050,9 @@ static void ath_tx_processq(struct ath_s
|
|
txq->axq_tx_inprogress = false;
|
|
if (bf_held)
|
|
list_del(&bf_held->list);
|
|
+
|
|
+ if (bf_is_ampdu_not_probing(bf))
|
|
+ txq->axq_ampdu_depth--;
|
|
spin_unlock_bh(&txq->axq_lock);
|
|
|
|
if (bf_held)
|
|
@@ -2168,6 +2181,8 @@ void ath_tx_edma_tasklet(struct ath_soft
|
|
INCR(txq->txq_tailidx, ATH_TXFIFO_DEPTH);
|
|
txq->axq_depth--;
|
|
txq->axq_tx_inprogress = false;
|
|
+ if (bf_is_ampdu_not_probing(bf))
|
|
+ txq->axq_ampdu_depth--;
|
|
spin_unlock_bh(&txq->axq_lock);
|
|
|
|
txok = !(txs.ts_status & ATH9K_TXERR_MASK);
|
|
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
|
|
@@ -714,8 +714,7 @@ static void ath9k_set_hw_capab(struct at
|
|
IEEE80211_HW_HAS_RATE_CONTROL |
|
|
IEEE80211_HW_RX_INCLUDES_FCS |
|
|
IEEE80211_HW_SUPPORTS_PS |
|
|
- IEEE80211_HW_PS_NULLFUNC_STACK |
|
|
- IEEE80211_HW_NEED_DTIM_PERIOD;
|
|
+ IEEE80211_HW_PS_NULLFUNC_STACK;
|
|
|
|
hw->wiphy->interface_modes =
|
|
BIT(NL80211_IFTYPE_STATION) |
|
|
--- a/drivers/net/wireless/ath/ath9k/init.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/init.c
|
|
@@ -646,8 +646,7 @@ void ath9k_set_hw_capab(struct ath_softc
|
|
IEEE80211_HW_SUPPORTS_PS |
|
|
IEEE80211_HW_PS_NULLFUNC_STACK |
|
|
IEEE80211_HW_SPECTRUM_MGMT |
|
|
- IEEE80211_HW_REPORTS_TX_ACK_STATUS |
|
|
- IEEE80211_HW_NEED_DTIM_PERIOD;
|
|
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS;
|
|
|
|
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
|
|
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
|
|
--- a/drivers/net/wireless/ath/ath9k/main.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/main.c
|
|
@@ -285,7 +285,8 @@ int ath_set_channel(struct ath_softc *sc
|
|
ath9k_hw_set_interrupts(ah, ah->imask);
|
|
|
|
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
|
|
- ath_beacon_config(sc, NULL);
|
|
+ if (sc->sc_flags & SC_OP_BEACONS)
|
|
+ ath_beacon_config(sc, NULL);
|
|
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
|
|
ath_start_ani(common);
|
|
}
|