1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-10 03:39:22 +02:00
openwrt-xburst/target/linux/ar71xx/base-files/etc/uci-defaults/leds
juhosg 65ca4389f1 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:09 +00:00

230 lines
5.2 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
COMMIT_SYSTEM=0
set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
COMMIT_SYSTEM=1
}
set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
COMMIT_SYSTEM=1
}
set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
COMMIT_SYSTEM=1
}
set_led_switch() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
local port_mask=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.port_mask='$port_mask'
EOF
COMMIT_SYSTEM=1
}
set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
COMMIT_SYSTEM=1
}
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
case "$board" in
alfa-nx)
set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
;;
ap113)
set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
rb750)
set_led_default "act" "act" "rb750:green:act" "1"
set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
dir-615-e4)
set_led_netdev "wan" "WAN" "dir-615-e4:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "dir-615-e4:green:lan1" "switch0" "0x02"
set_led_switch "lan2" "LAN2" "dir-615-e4:green:lan2" "switch0" "0x04"
set_led_switch "lan3" "LAN3" "dir-615-e4:green:lan3" "switch0" "0x08"
set_led_switch "lan4" "LAN4" "dir-615-e4:green:lan4" "switch0" "0x10"
;;
dir-825-b1)
set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1"
;;
hornet-ub)
set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
mzk-w04u)
set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
;;
mzk-w300nh)
set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
;;
nbg460n_550n_550nh)
set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
;;
om2p)
set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
;;
tl-mr11u | \
tl-mr3020)
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tl-mr3220 | \
tl-mr3420 )
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
tl-wa901nd)
set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tl-wr741nd)
set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
;;
tl-wr741nd-v4)
set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tl-wr941nd)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr1043nd)
set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr2543n)
set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
;;
wrt160nl)
set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
;;
wndr3700)
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
;;
wzr-hp-g300nh)
set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
;;
zcn-1523h-2)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
;;
zcn-1523h-5)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
;;
esac
[ "$COMMIT_SYSTEM" == "1" ] && uci commit system
exit 0