1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 03:50:36 +02:00
openwrt-xburst/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c
juhosg 9e32544f7a ar71xx: add a common function to configure USB power GPIOs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:41 +00:00

170 lines
3.9 KiB
C

/*
* Buffalo WZR-HP-G450G board support
*
* Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-m25p80.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#include "machtypes.h"
#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
static struct mtd_partition wzrhpg450h_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
}, {
.name = "ART",
.offset = 0x0050000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "uImage",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e80000,
}, {
.name = "user_property",
.offset = 0x1fe0000,
.size = 0x0020000,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f80000,
}
};
static struct flash_platform_data wzrhpg450h_flash_data = {
.parts = wzrhpg450h_partitions,
.nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
};
static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
{
.name = "buffalo:red:diag",
.gpio = 14,
.active_low = 1,
},
{
.name = "buffalo:orange:security",
.gpio = 13,
.active_low = 1,
},
};
static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
{
.name = "buffalo:blue:movie_engine",
.gpio = 13,
.active_low = 1,
},
{
.name = "buffalo:green:router",
.gpio = 14,
.active_low = 1,
},
};
static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 6,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 1,
.active_low = 1,
}, {
.desc = "aoss",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 8,
.active_low = 1,
}, {
.desc = "movie_engine",
.type = EV_KEY,
.code = BTN_6,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 0,
}, {
.desc = "router_off",
.type = EV_KEY,
.code = BTN_5,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 12,
.active_low = 0,
}
};
static void __init wzrhpg450h_init(void)
{
u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac = (u8 *) ee + 2;
ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
ath79_register_mdio(0, ~BIT(0));
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
wzrhpg450h_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg450h_gpio_keys),
wzrhpg450h_gpio_keys);
ath79_register_eth(0);
ath79_set_usb_power_gpio(16, GPIOF_OUT_INIT_HIGH, "USB power");
ath79_register_usb();
ap91_pci_init(ee, NULL);
ap9x_pci_setup_wmac_led_pin(0, 15);
ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
}
MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
wzrhpg450h_init);