qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-28 07:06:27 +02:00
Code
6762e5d4cc
openwrt-xburst/target/linux/etrax-2.6/patches/cris/019-vhdl.patch
blogic 41e8f769da initial merge for vhdl support on the foxboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-17 02:53:53 +00:00

4837 lines
138 KiB
Diff
Raw Blame History

diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,533 @@
+/*
+ foxbone.c
+ Linux Kernel Driver for FoxBone on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+#include <linux/spinlock.h>
+#include <linux/autoconf.h>
+#include <linux/interrupt.h>
+#include <asm/etraxgpio.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/arch/io_interface_mux.h>
+
+
+#include "foxbone.h"
+#include "foxbone_userspace.h"
+
+
+#define Fox_line_Read (1<<1)
+#define Fox_line_WriteData (1<<2)
+#define Fox_line_Reset (1<<3)
+#define Fox_line_WriteAddress (1<<4)
+
+#define FOX_CLEAR_LINES (~(0x00FFFF00 | Fox_line_Read | Fox_line_WriteAddress | Fox_line_WriteData))
+
+#define DEV_NAME "foxbone"
+#define DEV_MAJOR 14
+
+spinlock_t foxbone_lock_var = SPIN_LOCK_UNLOCKED;
+unsigned long foxbone_irq_flags;
+// is the userspce device enables ?
+unsigned char foxbone_userspace_is_open = 0;
+
+// are we processing interrupts ? (during fpga_flash the ints are not allowed to be handles
+unsigned char foxbone_allow_int;
+
+// the shadow of which ints are enabled
+unsigned int foxbone_shadow_int_high = 0;
+unsigned int foxbone_shadow_int_low = 0;
+
+// the following four variables get filled when the foxbone driver is started
+// they hold the release and the the application words
+unsigned int FOXBONE_release = 0;
+unsigned int FOXBONE_application1 = 0;
+unsigned int FOXBONE_application2 = 0;
+unsigned int FOXBONE_application3 = 0;
+
+
+
+FOXINT_CALLBACK foxint_callbacks[32];
+
+unsigned int foxbone_read(unsigned int add);
+void foxbone_write(unsigned int add, unsigned int data);
+
+static irqreturn_t foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+unsigned int foxbone_interrupt_enabled = 0;
+
+
+
+void FOX_delay(unsigned int d){
+ while(d--){
+ unsigned int i = 0;
+ for(i = 0; i < 32000; i++){
+ i*=2;
+ i/=2;
+ };
+ };
+};
+
+
+void foxbone_lock(void){
+ spin_lock_irqsave(&foxbone_lock_var, foxbone_irq_flags);
+
+};
+
+void foxbone_unlock(void){
+ spin_unlock_irqrestore(&foxbone_lock_var, foxbone_irq_flags);
+
+};
+
+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback){
+ if(irq > 31){
+ printk("foxbone: trying to register invalid interrupt\n");
+ return 0;
+ };
+ if(!foxbone_interrupt_enabled){
+ foxbone_interrupt_enabled = 1;
+ printk("foxbone: starting interrupt system\n");
+ int err;
+ if ((err = request_irq(PA_IRQ_NBR, foxbone_pa_interrupt, SA_INTERRUPT | SA_SHIRQ, "foxbone", 123))){
+ printk("foxbone: request_irq failed: Error %d\n",err);
+ return ;
+ }
+ printk("foxbone: request_irq success -> irq: %ld\n",PA_IRQ_NBR);
+ *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);
+ };
+
+ printk("foxbone: new int %d registered\n", irq);
+ foxint_callbacks[irq] = callback;
+ if(irq < 15){
+ foxbone_shadow_int_high |= (1<<irq);
+ foxbone_write(0x08, foxbone_shadow_int_high);
+ } else {
+ foxbone_shadow_int_high |= (1<<15);
+ foxbone_write(0x08, foxbone_shadow_int_high);
+ foxbone_shadow_int_low |= (1<<(irq-16));
+ foxbone_write(0x09, foxbone_shadow_int_low);
+ };
+ return 1;
+};
+
+
+void foxbone_unregister_interrupt(unsigned char irq){
+ if(irq > 31){
+ printk("foxbone: trying to unregister invalid interrupt\n");
+ return ;
+ };
+ printk("foxbone: interrupt %d unregistered\n", irq);
+ if(irq < 15){
+ foxbone_shadow_int_high &= ~(1<<irq);
+ foxbone_write(0x08, foxbone_shadow_int_high);
+ } else {
+ foxbone_shadow_int_low &= ~(1<<(irq-16));
+ foxbone_write(0x09, foxbone_shadow_int_low);
+
+ if(!foxbone_shadow_int_low){
+ foxbone_shadow_int_high &= ~(1<<15);
+ foxbone_write(0x08, foxbone_shadow_int_high);
+ };
+ };
+};
+
+#if 0
+#define DBG_INT(x) x
+#else
+#define DBG_INT(x)
+#endif
+
+// this is the bottom half of our interrupt handler
+static void foxbone_handle_interrupt(void){
+ if(foxbone_allow_int){
+ foxbone_lock();
+ unsigned int irq_high, irq_low, i;
+ DBG_INT(printk("Int handler");)
+ if(*R_PORT_PA_DATA & (1)){
+ irq_high = foxbone_read(0x08);
+ DBG_INT(printk("Got high_int %d\n", irq_high);)
+ for(i = 0; i < 15; i++){
+ if(irq_high & (1<<i)){
+ DBG_INT(printk("Go high_int %d\n",i);)
+ if(foxint_callbacks[i]){
+ foxint_callbacks[i](i);
+ };
+ };
+ };
+ if(irq_high & (0x8000)){
+ irq_low = foxbone_read(0x09);
+ DBG_INT(printk("Got low_int %d\n", irq_low);)
+ for(i = 0; i < 16; i++){
+ if(irq_low & (1<<i)){
+ DBG_INT(printk("Go low_int %d\n", i);)
+ if(foxint_callbacks[i+16]){
+ foxint_callbacks[i+16](i+16);
+ };
+ };
+ };
+
+ };
+ };
+ foxbone_unlock();
+ };
+};
+
+// this is the top half of our interrupt handler
+static void tasklet_foxbone_int(unsigned long data);
+DECLARE_TASKLET(tl_foxint_descr, tasklet_foxbone_int, 0L);
+static void tasklet_foxbone_int(unsigned long data){
+
+ DBG_INT(printk("got an int\n");)
+ foxbone_handle_interrupt();
+
+};
+
+
+static irqreturn_t
+foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long tmp;
+
+ /* Find what PA interrupts are active */
+ tmp = (*R_IRQ_READ1);
+// printk("_____%ud",*R_IRQ_READ1);
+ /* Find those that we have enabled */
+// tmp &= (1 << R_IRQ_MASK1_SET__pa0__BITNR);
+
+ /* Clear them.. */
+ // *R_IRQ_MASK1_CLR = tmp;
+ //(1 << R_IRQ_MASK1_SET__pa0__BITNR);
+
+ tasklet_schedule(&tl_foxint_descr);
+ // *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);
+
+ return IRQ_RETVAL(1);
+}
+
+
+static void foxbone_bus_in(void){
+ // turn all the iog8-15 pins into outputs
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ // turn all the iog16-23 pins into outputs
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+};
+
+static void foxbone_bus_out(void){
+ // turn all the iog8-15 pins into outputs
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ // turn all the iog16-23 pins into outputs
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+};
+
+void foxbone_reset(unsigned char reset){
+ if(reset){
+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Reset;
+ } else {
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Reset;
+ };
+};
+
+static void foxbone_setadd(unsigned long address){
+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
+
+ *R_PORT_G_DATA = port_g_data_shadow |= (address << 8)| Fox_line_WriteAddress;
+
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteAddress;
+};
+
+
+static unsigned int foxbone_read_data(unsigned char next){
+ unsigned int data;
+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
+
+ foxbone_bus_in();
+
+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Read;
+
+ // do the reading now
+ data = *R_PORT_G_DATA;
+ data = *R_PORT_G_DATA;
+
+ // now return the Fox_line_ReadData to low state to idle the bus from the FPGA side
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Read;
+ foxbone_bus_out();
+ return ((unsigned int)((data&0x00FFFF00)>>8));
+}
+
+
+static unsigned int foxbone_write_data(unsigned int data, unsigned char next) {
+ // clear all address/data/control bits
+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
+
+ *R_PORT_G_DATA = port_g_data_shadow |= (data << 8)| Fox_line_WriteData;
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
+
+ return 0;
+}
+
+void foxbone_write(unsigned int add, unsigned int data){
+ foxbone_setadd(add);
+ foxbone_write_data(data, 0);
+};
+
+unsigned int foxbone_read(unsigned int add){
+ foxbone_setadd(add);
+ return foxbone_read_data(0);
+};
+
+void foxbone_write_next(unsigned data){
+ foxbone_write_data(data, 1);
+};
+
+unsigned int foxbone_read_next(void){
+ return foxbone_read_data(1);
+};
+
+void foxbone_bulk_write(unsigned int *data, unsigned int length, unsigned int add){
+ unsigned int i;
+ foxbone_write(add, *data);
+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
+ for(i = 1; i < length; i++){
+ *R_PORT_G_DATA = port_g_data_shadow = def_val | data[i]<<8;
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
+ };
+};
+
+void foxbone_bulk_read(unsigned int *data, unsigned int length, unsigned int add){
+ //printk("Get data from %d %d\n", add, length);
+ unsigned int i;
+ for(i = 0; i < length; i++){
+ if(i == 0){
+ data[i] = foxbone_read(add);
+ } else {
+ data[i] = foxbone_read_next();
+ };
+ };
+
+};
+
+void foxbone_initialise_bus(void){
+ memset(foxint_callbacks, 0, sizeof(FOXINT_CALLBACK)*32);
+
+ // clear all address/data/control bits
+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
+ foxbone_reset(0);
+ int i;
+ for(i = 0; i < 32000; i++){
+ i++;
+ i--;
+ };
+ foxbone_reset(1);
+
+ foxbone_bus_out();
+
+ FOXBONE_release = foxbone_read(0x04);
+ FOXBONE_application1 = foxbone_read(0x05);
+ FOXBONE_application2 = foxbone_read(0x06);
+ FOXBONE_application3 = foxbone_read(0x07);
+ printk("foxbone : release = 0x%04x\n", FOXBONE_release);
+ printk("foxbone : application word 1 = 0x%04x\n", FOXBONE_application1);
+ printk("foxbone : application word 2 = 0x%04x\n", FOXBONE_application2);
+ printk("foxbone : application word 3 = 0x%04x\n", FOXBONE_application3);
+
+
+};
+
+
+static ssize_t foxbone_userspace_write(struct file * file, const char * buffer, size_t count, loff_t *offset){
+ if(count > (64 * 1024)){
+ printk("foxbone: trying to bulk write too much data\n");
+ return 1;
+ };
+ unsigned int *bulk_data = (unsigned int) kmalloc(count, GFP_KERNEL);
+
+ copy_from_user((char*) bulk_data, buffer, count);
+
+ foxbone_bulk_write(&bulk_data[2], bulk_data[1], bulk_data[0]);
+
+ kfree(bulk_data);
+ return 0;
+};
+
+
+static ssize_t foxbone_userspace_read(struct file *file, char *buffer, size_t count, loff_t *offset){
+ if(count > (64 * 1024)){
+ printk("foxbone: trying to bulk read too much data\n");
+ return 0;
+ };
+
+ // find out which register we want to read
+ unsigned int bulk_data_info[2];
+ copy_from_user((char*) bulk_data_info, buffer, 8);
+
+ // read the data
+ unsigned int *bulk_data = (unsigned int)kmalloc(count, GFP_KERNEL);
+
+ foxbone_bulk_read(&bulk_data[0], bulk_data_info[1], bulk_data_info[0]);
+
+ copy_to_user((char*)buffer, (char*)bulk_data, count);
+
+ kfree(bulk_data);
+
+ return count / 4;
+};
+
+// the app has send us some control data
+static int foxbone_userspace_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ int retval = 0;
+ FOXBONE_WRITE fb_write;
+ switch (cmd) {
+ case IOCTL_FOXBONE_INIT_BUS:
+ foxbone_initialise_bus();
+ break;
+
+ case IOCTL_FOXBONE_WRITE_REG:
+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
+ foxbone_write(fb_write.reg, fb_write.data);
+ break;
+
+ case IOCTL_FOXBONE_READ_REG:
+ retval = foxbone_read(arg);
+ break;
+
+ case IOCTL_FOXBONE_WRITE_NEXT:
+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
+ foxbone_write_next(fb_write.data);
+ break;
+
+ case IOCTL_FOXBONE_READ_NEXT:
+ retval = foxbone_read_next();
+ break;
+
+ case IOCTL_FOXBONE_INTERRUPTS:
+ foxbone_allow_int = arg;
+ break;
+
+ default:
+ printk("foxbone_userspace : unknown ioctl\n");
+ break;
+ }
+ return retval;
+};
+
+
+
+static int foxbone_userspace_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("foxbone_userspace : trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxbone_userspace_is_open) {
+ printk("foxbone_userspace : Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int foxbone_userspace_close(struct inode * inode, struct file * file){
+
+ foxbone_userspace_is_open = 0;
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxbone_userspace_fops = {
+ ioctl: foxbone_userspace_ioctl,
+ write: foxbone_userspace_write,
+ read: foxbone_userspace_read,
+ open: foxbone_userspace_open,
+ release: foxbone_userspace_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int foxbone_userspace_init(void){
+ // flame the kprintk
+ printk("foxbone_userspace : FOX-VHDL userspace access module\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxbone_userspace_fops)) {
+ printk( "fpga_mod.ko : Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+ foxbone_userspace_is_open = 0;
+ printk("foxbone_userspace : Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void foxbone_userspace_exit(void){
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+
+static int __init foxbone_init(void){
+ printk("foxbone : FOX-VHDL FOXBONE access module started\n");
+ foxbone_initialise_bus();
+ foxbone_allow_int = 1;
+ foxbone_userspace_init();
+ return 0;
+}
+
+
+static void __exit foxbone_exit(void){
+ printk( "foxbone : Cleanup\n" );
+ foxbone_userspace_exit();
+}
+
+module_init (foxbone_init);
+module_exit (foxbone_exit);
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,21 @@
+// prototypes for foxbone compliant modules
+
+typedef void (*FOXINT_CALLBACK) (unsigned int);
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
+void foxbone_unregister_interrupt(unsigned char irq);
+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback);
+void foxbone_reset(unsigned char reset);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,155 @@
+/*
+ foxbone_syscalls.c
+ Linux Kernel syscalls for FoxBone on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/kernel.h>
+#include <asm/uaccess.h>
+#include <linux/foxbone_syscalls.h>
+#include "foxbone.h"
+
+asmlinkage unsigned short int sys_foxboneread(unsigned short int reg){
+ return foxbone_read(reg);
+};
+
+asmlinkage void sys_foxbonewrite(unsigned short int reg, unsigned short int value){
+ foxbone_write(reg, value);
+};
+
+asmlinkage void sys_foxbonebulkread(unsigned short int reg, unsigned short int *value, unsigned int length){
+ unsigned int i;
+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
+ *buffer = foxbone_read(reg);
+ for(i = 1; i < length; i++){
+ buffer[i] = foxbone_read_next();
+ };
+ copy_to_user(value, buffer, length * 2);
+ kfree(buffer);
+
+};
+
+asmlinkage void sys_foxbonebulkwrite(unsigned short int reg, unsigned short int *value, unsigned int length){
+ unsigned int i;
+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
+ copy_from_user(buffer, value, length * 2);
+ foxbone_write(reg, *buffer);
+ for(i = 1; i < length; i++){
+ foxbone_write_next(buffer[i]);
+ };
+ kfree(buffer);
+};
+
+
+/*
+ interrupt handling from userspace
+*/
+
+typedef struct _FOX_INT {
+ unsigned char enabled;
+ unsigned char count;
+ unsigned char wakeup;
+ wait_queue_head_t wait_queue;
+} FOX_INT;
+
+
+FOX_INT syscall_interrupts[32];
+
+
+void foxbone_interrupt_callback(unsigned int interrupt){
+ //printk("GOT INT %d\n", irq_no);
+ if(syscall_interrupts[interrupt].enabled){
+ syscall_interrupts[interrupt].count ++;
+ if(syscall_interrupts[interrupt].wakeup){
+ wake_up_interruptible(&syscall_interrupts[interrupt].wait_queue);
+ };
+ };
+};
+
+
+asmlinkage void sys_foxboneintreg(unsigned long int interrupt, unsigned char state){
+ if(interrupt > 31){
+ interrupt = 31;
+ };
+ if(state){
+ foxbone_register_interrupt(interrupt, foxbone_interrupt_callback);
+ syscall_interrupts[interrupt].enabled = 1;
+ syscall_interrupts[interrupt].count = 0;
+ init_waitqueue_head(&syscall_interrupts[interrupt].wait_queue);
+ } else {
+ foxbone_unregister_interrupt(interrupt);
+ syscall_interrupts[interrupt].enabled = 0;
+ };
+};
+
+
+asmlinkage unsigned int sys_foxboneintcheck( unsigned long int interrupt){
+ unsigned int retval = 0xffff;
+ if(interrupt > 31){
+ interrupt = 31;
+ };
+ if(syscall_interrupts[interrupt].enabled){
+ retval = syscall_interrupts[interrupt].count;
+ syscall_interrupts[interrupt].count = 0;
+ };
+ return retval;
+};
+
+
+asmlinkage unsigned int sys_foxboneintwait(unsigned long int interrupt, unsigned char timeout){
+ unsigned int retval = 0xffff;
+ if(interrupt > 31){
+ interrupt = 31;
+ };
+ if(syscall_interrupts[interrupt].enabled){
+ syscall_interrupts[interrupt].wakeup = 1;
+ syscall_interrupts[interrupt].count = 0;
+ interruptible_sleep_on_timeout(&syscall_interrupts[interrupt].wait_queue, timeout*HZ);
+ if(syscall_interrupts[interrupt].count != 0){
+ retval = syscall_interrupts[interrupt].count;
+ };
+ syscall_interrupts[interrupt].count = 0;
+ syscall_interrupts[interrupt].wakeup = 0;
+ };
+ return retval;
+};
+
+
+asmlinkage void sys_foxbonereset(unsigned short int reg){
+ foxbone_reset(0);
+ int i;
+ for(i = 0; i < 32000; i++){
+ i++;
+ i--;
+ };
+ foxbone_reset(1);
+};
+
+static int __init foxbone_syscall_init(void){
+ memset(syscall_interrupts, 0, sizeof(FOX_INT) * 32);
+ return 0;
+}
+
+
+static void __exit foxbone_syscall_exit(void){
+}
+
+module_init (foxbone_syscall_init);
+module_exit (foxbone_syscall_exit);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,17 @@
+// These are the ioctls for accessing /dev/foxbone
+
+#define IOCTL_FOXBONE_INIT_BUS 0x3341
+#define IOCTL_FOXBONE_WRITE_REG 0x3342
+#define IOCTL_FOXBONE_READ_REG 0x3343
+#define IOCTL_FOXBONE_WRITE_NEXT 0x3344
+#define IOCTL_FOXBONE_READ_NEXT 0x3345
+#define IOCTL_FOXBONE_INTERRUPTS 0x3346
+
+// the data structure used to write a register
+typedef struct _FOXBONE_WRITE {
+ unsigned int reg;
+ unsigned int data;
+} FOXBONE_WRITE;
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,2 @@
+obj-$(CONFIG_FOXBONE) += foxbone.o
+obj-$(CONFIG_FOXBONE) += foxbone_syscalls.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,170 @@
+/*
+ fox_event.c
+ Linux Kernel Driver for FoxBone EventCounter on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "event"
+#define DEV_MAJOR 193
+
+#include "foxbone.h"
+
+unsigned char foxevent_is_open = 0;
+
+
+#define IOCTL_FOXBONE_EVENT_SET_ALARM 0x4745
+#define IOCTL_FOXBONE_EVENT_GET_COUNT 0x4746
+#define IOCTL_FOXBONE_EVENT_GET_ALARM 0x4747
+#define IOCTL_FOXBONE_EVENT_RESET_ALARM 0x4748
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ unsigned int current_io = 0;
+ switch (cmd) {
+ case IOCTL_FOXBONE_EVENT_SET_ALARM:
+ foxbone_write(0x0040, 0);
+ foxbone_write(0x0041, arg);
+ foxbone_write(0x0040, 3);
+ break;
+
+ case IOCTL_FOXBONE_EVENT_GET_COUNT:
+ retval = foxbone_read(0x0042);
+ break;
+
+ case IOCTL_FOXBONE_EVENT_GET_ALARM:
+ retval = foxbone_read(0x0043);
+ break;
+
+ case IOCTL_FOXBONE_EVENT_RESET_ALARM:
+ current_io = foxbone_read(0x0040);
+ current_io &= ~(1<<1);
+ foxbone_write(0x0040, 0);
+ current_io |= (1<<1);
+ foxbone_write(0x0040, 0);
+ break;
+
+ default:
+ printk("fox_event: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_event: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxevent_is_open) {
+ printk("fox_event: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ printk("fox_event: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxevent_is_open = 0;
+
+
+ // more flaming
+ printk("fox_event: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxevent_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_event: FOX-VHDL FPGA io module\n");
+ //printk("fox_event: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_event: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxevent_module_fops)) {
+ printk( "fox_event: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxevent_is_open = 0;
+ printk("fox_event: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_event: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_EVENT) += fox_event.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,2 @@
+obj-$(CONFIG_FOX_FPGA) += dpa3palg.oo dpalg.oo dpjtag2.oo dpjtag.oo dpuncomp.oo dpuser.oo fpga_module.oo
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOX_FPGA) += dpa3palg.o dpalg.o dpjtag2.o dpjtag.o dpuncomp.o dpuser.o fpga_module.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,164 @@
+/*
+ fox_io.c
+ Linux Kernel Driver for FoxBone I/O on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "foxio"
+#define DEV_MAJOR 190
+
+#include "foxbone.h"
+
+unsigned char foxio_is_open = 0;
+
+
+#define IOCTL_FOXBONE_IO_SET 0x4545
+#define IOCTL_FOXBONE_IO_CLR 0x4546
+#define IOCTL_FOXBONE_IO_GET 0x4547
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ unsigned int current_io = 0;
+ switch (cmd) {
+ case IOCTL_FOXBONE_IO_SET:
+ current_io = foxbone_read(0x0014);
+ current_io |= (1<<arg);
+ foxbone_write(0x0014, current_io);
+ break;
+
+ case IOCTL_FOXBONE_IO_CLR:
+ current_io = foxbone_read(0x0014);
+ current_io &= ~(1<<arg);
+ foxbone_write(0x0014, current_io);
+ break;
+
+ case IOCTL_FOXBONE_IO_GET:
+ retval = foxbone_read(0x0015);
+ break;
+
+
+ default:
+ printk("fox_io: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_io: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxio_is_open) {
+ printk("fox_io: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ printk("fox_io: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxio_is_open = 0;
+
+
+ // more flaming
+ printk("fox_io: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxio_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_io: FOX-VHDL FPGA io module\n");
+ //printk("fox_io: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_io: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxio_module_fops)) {
+ printk( "fox_io: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxio_is_open = 0;
+ printk("fox_io: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_io: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_IO) += fox_io.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,154 @@
+/*
+ fox_loopback.c
+ Linux Kernel Driver for FoxBone Loopback Register on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "loopback"
+#define DEV_MAJOR 192
+
+#include "foxbone.h"
+
+unsigned char foxloopback_is_open = 0;
+
+
+#define IOCTL_FOXBONE_LOOPBACK_SET 0x4045
+#define IOCTL_FOXBONE_LOOPBACK_GET 0x4046
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ unsigned int current_io = 0;
+ switch (cmd) {
+ case IOCTL_FOXBONE_LOOPBACK_SET:
+ foxbone_write(0x0013, arg);
+ break;
+
+ case IOCTL_FOXBONE_LOOPBACK_GET:
+ retval = foxbone_read(0x0013);
+ break;
+
+ default:
+ printk("fox_loopback: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_loopback: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxloopback_is_open) {
+ printk("fox_loopback: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ printk("fox_loopback: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxloopback_is_open = 0;
+
+
+ // more flaming
+ printk("fox_loopback: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxloopback_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_loopback: FOX-VHDL FPGA io module\n");
+ //printk("fox_loopback: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_loopback: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxloopback_module_fops)) {
+ printk( "fox_loopback: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxloopback_is_open = 0;
+ printk("fox_loopback: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_loopback: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,172 @@
+/*
+ fox_multiply.c
+ Linux Kernel Driver for FoxBone 32x32 fast multiplier on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "multiply"
+#define DEV_MAJOR 194
+
+#include "foxbone.h"
+
+unsigned char foxmultiply_is_open = 0;
+
+
+#define IOCTL_FOXBONE_MUTIPLY 0x4945
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ long data[3], i;
+ int retval = 0;
+ switch (cmd) {
+ case IOCTL_FOXBONE_MUTIPLY:
+ copy_from_user((char*)&data[0], (char*)arg, sizeof(long) * 3);
+ data[2] = jiffies;
+ printk("%ld, %ld\n", data[0], data[1]);
+ //for(i = 0; i < 1024*1024; i++){
+ foxbone_write(0x0021, (data[0]>>16)&0xffff);
+ foxbone_write(0x0020, data[0]&0xffff);
+ foxbone_write(0x0023, (data[1]>>16)&0xffff);
+ foxbone_write(0x0022, data[1]&0xffff);
+ data[0] = foxbone_read(0x0025);
+ data[0] = (data[0] << 16) + foxbone_read(0x0024);
+ data[1] = foxbone_read(0x0027);
+ data[1] = (data[1] << 16) + foxbone_read(0x0026);
+ /*printk("%4x\n", foxbone_read(0x0020));
+ printk("%4x\n", foxbone_read(0x0021));
+ printk("%4x\n", foxbone_read(0x0022));
+ printk("%4x\n", foxbone_read(0x0023));
+
+ printk("%4x\n", foxbone_read(0x0024));
+ printk("%4x\n", foxbone_read(0x0025));
+ printk("%4x\n", foxbone_read(0x0026));
+ printk("%4x\n", foxbone_read(0x0027));
+ */
+ //};
+ data[2] = jiffies - data[2];
+ copy_to_user((char*)arg, (char*)&data[0], sizeof(unsigned long) * 3);
+ break;
+
+ default:
+ printk("fox_multiply: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_multiply: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxmultiply_is_open) {
+ printk("fox_multiply: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ //printk("fox_multiply: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ // unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxmultiply_is_open = 0;
+
+
+ // more flaming
+ //printk("fox_multiply: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxmultiply_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_multiply: FOX-VHDL FPGA multiplier module\n");
+ //printk("fox_multiply: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_multiply: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxmultiply_module_fops)) {
+ printk( "fox_multiply: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxmultiply_is_open = 0;
+ printk("fox_multiply: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_multiply: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,180 @@
+/*
+ fox_pwm.c
+ Linux Kernel Driver for FoxBone 16 channel PWM generator on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "pwm"
+#define DEV_MAJOR 15
+
+#include "foxbone.h"
+
+unsigned char foxpwm_is_open = 0;
+
+
+#define IOCTL_PWM_ENABLE 0x2310
+#define IOCTL_PWM_DISABLE 0x2311
+#define IOCTL_PWM_CHANNEL_BASE 0x2320
+#define IOCTL_PWM_CHANNEL0 0x2320
+#define IOCTL_PWM_CHANNEL1 0x2321
+#define IOCTL_PWM_CHANNEL2 0x2322
+#define IOCTL_PWM_CHANNEL3 0x2323
+#define IOCTL_PWM_CHANNEL4 0x2324
+#define IOCTL_PWM_CHANNEL5 0x2325
+#define IOCTL_PWM_CHANNEL6 0x2326
+#define IOCTL_PWM_CHANNEL7 0x2327
+#define IOCTL_PWM_CHANNEL8 0x2328
+#define IOCTL_PWM_CHANNEL9 0x2329
+#define IOCTL_PWM_CHANNELA 0x232a
+#define IOCTL_PWM_CHANNELB 0x232b
+#define IOCTL_PWM_CHANNELC 0x232c
+#define IOCTL_PWM_CHANNELD 0x232d
+#define IOCTL_PWM_CHANNELE 0x232e
+#define IOCTL_PWM_CHANNELF 0x232f
+
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ unsigned int current_pwm;
+ if((cmd >= IOCTL_PWM_CHANNEL0) && (cmd <= IOCTL_PWM_CHANNELF)){
+ foxbone_write(0x0050 + (cmd - IOCTL_PWM_CHANNEL_BASE), arg);
+ } else {
+ switch (cmd) {
+ case IOCTL_PWM_ENABLE:
+ current_pwm = foxbone_read(0x0060);
+ current_pwm |= (1<<arg);
+ foxbone_write(0x0060, current_pwm);
+ break;
+
+ case IOCTL_PWM_DISABLE:
+ current_pwm = foxbone_read(0x0060);
+ current_pwm &= ~(1<<arg);
+ foxbone_write(0x0060, current_pwm);
+ break;
+
+ default:
+ printk("fox_pwm: unknown ioctl\n");
+ break;
+ }
+ };
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_pwm: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxpwm_is_open) {
+ printk("fox_pwm: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ printk("fox_pwm: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxpwm_is_open = 0;
+
+
+ // more flaming
+ printk("fox_pwm: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxpwm_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_pwm: FOX-VHDL FPGA PWM module\n");
+ //printk("fox_pwm: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_pwm: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxpwm_module_fops)) {
+ printk( "fox_pwm: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxpwm_is_open = 0;
+ printk("fox_pwm: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_pwm: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,16 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,168 @@
+/*
+ fox_timebase.c
+ Linux Kernel Driver for FoxBone TimeBase on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "timebase"
+#define DEV_MAJOR 191
+
+#include "foxbone.h"
+
+unsigned char foxtimebase_is_open = 0;
+
+
+#define IOCTL_FOXBONE_TIMEBASE_ENABLE 0x4645
+#define IOCTL_FOXBONE_TIMEBASE_DISABLE 0x4646
+#define IOCTL_FOXBONE_TIMEBASE_SETLO 0x4647
+#define IOCTL_FOXBONE_TIMEBASE_SETHI 0x4648
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ switch (cmd) {
+ case IOCTL_FOXBONE_TIMEBASE_ENABLE:
+ foxbone_write(0x0100, 0x01);
+ break;
+
+ case IOCTL_FOXBONE_TIMEBASE_DISABLE:
+ foxbone_write(0x0100, 0x00);
+ break;
+
+ case IOCTL_FOXBONE_TIMEBASE_SETLO:
+ foxbone_write(0x0100, 0x00);
+ foxbone_write(0x0102, arg);
+ foxbone_write(0x0100, 0x01);
+ break;
+
+ case IOCTL_FOXBONE_TIMEBASE_SETHI:
+ foxbone_write(0x0100, 0x00);
+ foxbone_write(0x0103, arg);
+ foxbone_write(0x0100, 0x01);
+ break;
+
+ default:
+ printk("fox_timebase: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("fox_timebase: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(foxtimebase_is_open) {
+ printk("fox_timebase: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+
+ // more flaming
+ printk("fox_timebase: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ foxtimebase_is_open = 0;
+
+
+ // more flaming
+ printk("fox_timebase: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations foxtimebase_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("fox_timebase: FOX-VHDL FPGA timebase module\n");
+ //printk("fox_timebase: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("fox_timebase: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxtimebase_module_fops)) {
+ printk( "fox_timebase: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ foxtimebase_is_open = 0;
+ printk("fox_timebase: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "fox_timebase: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,661 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/uaccess.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+#include "foxbone.h"
+
+
+#if 0
+#define DBG(x) x
+#else
+#define DBG(x)
+#endif
+
+
+
+// software delay
+void FOXVHDL_delay(int ms) {
+ int i,a;
+ int delayvar=10;
+
+ for (a=0;a<ms;a++) {
+ for (i=0;i<35;i++) {
+ delayvar*=2;
+ delayvar/=2;
+ }
+ }
+}
+
+
+
+/*
+||
+|| FOXVHDL CTL functions
+||
+*/
+
+
+static unsigned char FOXVHDL_current_bank = 0xff;
+
+static unsigned char blitting = 1;
+
+static unsigned char refreshrate = 6;
+
+
+
+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
+ // translate the three color passed in a single 16 bit color word
+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
+ return result;
+}
+
+
+
+
+// wait until the videostate pin has the wanted value
+void FOXVHDL_wait_videostate(unsigned char wait_state){
+/* unsigned char vid_state = 0;
+ unsigned int max_error = 0xffff;
+ //printk("Start wait\n");
+ do {
+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
+ max_error--;
+ } while((vid_state != wait_state)&&(max_error > 10));
+ */
+ DBG(if(max_error < 11){printk("Stop wait\n");};)
+};
+
+
+// choose the bank that we want to display
+// OG5 == 0 --> Bank0
+// OG5 == 1 --> Bank1
+void FOXVHDL_set_bank(unsigned char bank){
+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
+ if(FOXVHDL_current_bank == bank){
+ return;
+ };
+
+ DBG(printk("FOXVHDL_set_bank\n");)
+
+ FOXVHDL_current_bank = bank;
+ foxbone_write(0x7001, FOXVHDL_current_bank);
+
+
+};
+
+
+// blit the bank
+void FOXVHDL_swap_bank(void){
+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));
+};
+
+
+// initialise the I/O pins
+void FOXVHDL_init(void){
+ DBG(printk("FOXVHDL_init\n");)
+
+ FOXVHDL_current_bank = 0;
+
+ FOXVHDL_set_bank(1);
+
+};
+
+/*
+||
+|| FOXVHDL IMAGE FUNCTIONS
+||
+*/
+#define Fox_line_WriteData (1<<2)
+
+void FOXVHDL_blit(unsigned short int *image){
+ unsigned long i;
+ unsigned int fb_ctl_reg;
+
+ if(blitting){
+ // reset the address pointer
+ fb_ctl_reg = foxbone_read(0x7001);
+ fb_ctl_reg |= (1<<4);
+ foxbone_write(0x7001, fb_ctl_reg);
+ fb_ctl_reg &= ~(1<<4);
+ foxbone_write(0x7001, fb_ctl_reg);
+
+ foxbone_write(0x7000, image[0]);
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ for(i = 1; i < 640 * 400; i++){
+
+ *R_PORT_G_DATA = port_g_data_shadow =
+ (port_g_data_shadow & 0xff0000ff) | image[i]<<8;
+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_WriteData;
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
+ };
+ for(i = 0; i <6144; i++){
+ foxbone_write_next(0);
+ };
+ FOXVHDL_swap_bank();
+ };
+};
+
+
+
+
+
+
+/*
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||
+|| FRAMEBUFFER CODE
+||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+
+*/
+
+
+
+
+#define VIDEOMEMSIZE (640 * 400 * 2) //512K
+
+static void *videomemory;
+static u_long videomemorysize = VIDEOMEMSIZE;
+
+static unsigned char fb_started = 0;
+
+static struct fb_var_screeninfo foxfb_default __initdata = {
+ .xres = 640,
+ .yres = 400,
+ .xres_virtual = 640,
+ .yres_virtual = 400,
+ .bits_per_pixel = 16,
+ .red = { 0, 5, 0 },
+ .green = { 5, 6, 0 },
+ .blue = { 11, 5, 0 },
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo foxfb_fix __initdata = {
+ .id = "FOX-VHDL FB",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int foxfb_set_par(struct fb_info *info);
+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
+
+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+static struct fb_ops foxfb_ops = {
+ .fb_check_var = foxfb_check_var,
+ .fb_set_par = foxfb_set_par,
+ .fb_setcolreg = foxfb_setcolreg,
+
+ .fb_pan_display = foxfb_pan_display,
+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect,
+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea,
+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit,
+ .fb_mmap = foxfb_mmap,
+ .fb_ioctl = foxfb_ioctl,
+};
+
+// this function is defined in fbmem.c
+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+// this should be a free one
+#define FOX_FBIOGET_SCREEN 0x4642
+#define FOX_FBBLIT 0x4643
+#define FOX_FB_RATE 0x4645
+#define FOX_FB_TFT 0x4646
+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
+ void __user *argp = (void __user *)arg;
+ unsigned int fb_ctl_reg;
+ switch(cmd){
+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
+ case FOX_FBIOGET_SCREEN:
+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
+ return 0;
+ } else {
+ return -1;
+ };
+ case FOX_FBBLIT:
+ fb_ctl_reg = foxbone_read(0x7001);
+ if(arg){
+ printk("Enable FB\n");
+ fb_ctl_reg &= ~(1<<1);
+ } else {
+ printk("Disable FB\n");
+ fb_ctl_reg |= (1<<1);
+ };
+ blitting = arg;
+ foxbone_write(0x7001, fb_ctl_reg);
+ break;
+ case FOX_FB_RATE:
+ if((arg > 9) || (arg < 1)){
+ printk("fb0 : Illegal refreshrate\n");
+ break;
+ };
+ refreshrate = arg;
+ printk("fb0 : new refreshrate\n");
+ break;
+ case FOX_FB_TFT:
+ fb_ctl_reg = foxbone_read(0x7001);
+ if(arg){
+ printk("Enable TFT\n");
+ fb_ctl_reg |= (1<<3);
+ } else {
+ printk("Disable TFT\n");
+ fb_ctl_reg &= ~(1<<3);
+ };
+ foxbone_write(0x7001, fb_ctl_reg);
+ break;
+ default:
+ return fb_ioctl(inode, file, cmd, arg);
+ };
+ return 0;
+};
+
+// TODO add our own optimized code here
+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
+ cfb_fillrect(info, rect);
+};
+
+
+// TODO add our own optimized code here
+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
+ cfb_copyarea(info, area);
+};
+
+// TODO add our own optimized code here
+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
+ cfb_imageblit(info, image);
+};
+
+
+/*
+ * Internal routines
+ */
+
+static u_long get_line_length(int xres_virtual, int bpp)
+{
+ u_long length;
+
+ length = xres_virtual * bpp;
+ length = (length + 31) & ~31;
+ length >>= 3;
+ return (length);
+}
+
+ /*
+ * Setting the video mode has been split into two parts.
+ * First part, xxxfb_check_var, must not write anything
+ * to hardware, it should only verify and adjust var.
+ * This means it doesn't alter par but it does use hardware
+ * data from it to check this var.
+ */
+
+static int foxfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ u_long line_length;
+
+ if (var->vmode & FB_VMODE_CONUPDATE) {
+ var->vmode |= FB_VMODE_YWRAP;
+ var->xoffset = info->var.xoffset;
+ var->yoffset = info->var.yoffset;
+ }
+
+ var->xres = 640;
+ var->yres = 400;
+
+ var->bits_per_pixel = 16;
+
+ if (var->xres_virtual < var->xoffset + var->xres)
+ var->xres_virtual = var->xoffset + var->xres;
+ if (var->yres_virtual < var->yoffset + var->yres)
+ var->yres_virtual = var->yoffset + var->yres;
+
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > videomemorysize)
+ return -ENOMEM;
+
+ var->red.offset = 0;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 11;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ return 0;
+}
+
+
+
+/* This routine actually sets the video mode. It's in here where we
+ * the hardware state info->par and fix which can be affected by the
+ * change in par. For this driver it doesn't do much.
+ */
+static int foxfb_set_par(struct fb_info *info){
+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
+ return 0;
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+
+
+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
+ if (regno >= 256) /* no. of hw registers */
+ return 1;
+
+ /* grayscale works only partially under directcolor */
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue =
+ (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ /* Directcolor:
+ * var->{color}.offset contains start of bitfield
+ * var->{color}.length contains length of bitfield
+ * {hardwarespecific} contains width of RAMDAC
+ * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
+ * RAMDAC[X] is programmed to (red, green, blue)
+ *
+ * Pseudocolor:
+ * uses offset = 0 && length = RAMDAC register width.
+ * var->{color}.offset is 0
+ * var->{color}.length contains widht of DAC
+ * cmap is not used
+ * RAMDAC[X] is programmed to (red, green, blue)
+ * Truecolor:
+ * does not use DAC. Usually 3 are present.
+ * var->{color}.offset contains start of bitfield
+ * var->{color}.length contains length of bitfield
+ * cmap is programmed to (red << red.offset) | (green << green.offset) |
+ * (blue << blue.offset) | (transp << transp.offset)
+ * RAMDAC does not exist
+ */
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+ break;
+ case FB_VISUAL_DIRECTCOLOR:
+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
+ green = CNVT_TOHW(green, 8);
+ blue = CNVT_TOHW(blue, 8);
+ /* hey, there is bug in transp handling... */
+ transp = CNVT_TOHW(transp, 8);
+ break;
+ }
+#undef CNVT_TOHW
+ /* Truecolor has hardware independent palette */
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+
+ if (regno >= 16)
+ return 1;
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ break;
+ case 16:
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ break;
+ case 24:
+ case 32:
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ break;
+ }
+ return 0;
+ }
+ return 0;
+}
+
+ /*
+ * Pan or Wrap the Display
+ *
+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+
+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->yoffset < 0
+ || var->yoffset >= info->var.yres_virtual
+ || var->xoffset)
+ return -EINVAL;
+ } else {
+ if (var->xoffset + var->xres > info->var.xres_virtual ||
+ var->yoffset + var->yres > info->var.yres_virtual)
+ return -EINVAL;
+ }
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+ return 0;
+}
+
+/*
+ * Most drivers don't need their own mmap function
+ */
+
+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
+ unsigned long page, pos;
+ unsigned long start = vma->vm_start;
+ unsigned long size = vma->vm_end-vma->vm_start;
+ printk("mmap : %ld %ld\n", size, info->fix.smem_len);
+ //if (size > info->fix.smem_len){
+ // return -EINVAL;
+ //}
+ printk("MMAP2\n");
+ pos = (unsigned long) info->screen_base;
+ while (size > 0) {
+ page = page_to_pfn(vmalloc_to_page((void *)pos));
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+ return 0;
+}
+
+
+
+
+
+// our timer
+struct timer_list foxfb_timer;
+
+
+// the prototype for the callback
+static void foxfb_timer_callback(unsigned long ptr);
+
+
+// setup the mmc timer
+static void foxfb_timer_setup(void){
+ init_timer(&foxfb_timer);
+ foxfb_timer.function = foxfb_timer_callback;
+ foxfb_timer.data = 0;
+ foxfb_timer.expires = jiffies + ( HZ / refreshrate);
+ add_timer(&foxfb_timer);
+};
+
+
+// the timer callback function that detects if the card status has changed
+static void foxfb_timer_callback(unsigned long ptr){
+ del_timer(&foxfb_timer);
+ FOXVHDL_blit(videomemory);
+ foxfb_timer_setup();
+};
+
+
+static void foxfb_platform_release(struct device *device){
+ // This is called when the reference count goes to zero.
+}
+
+
+static int __init foxfb_probe(struct platform_device *dev){
+ struct fb_info *info;
+ int retval = -ENOMEM;
+
+ if (!(videomemory = vmalloc(videomemorysize)))
+ return retval;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
+ if (!info)
+ goto err;
+
+ info->screen_base = (char*)videomemory;
+ info->fbops = &foxfb_ops;
+ info->fix.smem_len = videomemorysize;
+ retval = fb_find_mode(&info->var, info, NULL,
+ NULL, 0, NULL, 8);
+
+ if (!retval || (retval == 4))
+ info->var = foxfb_default;
+
+ info->fix = foxfb_fix;
+ info->pseudo_palette = info->par;
+ info->par = NULL;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0)
+ goto err1;
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err2;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+
+ //FOXVHDL_blit(videomemory);
+ foxfb_timer_setup();
+ return 0;
+err2:
+ fb_dealloc_cmap(&info->cmap);
+err1:
+ framebuffer_release(info);
+err:
+ vfree(videomemory);
+ return retval;
+}
+
+static int foxfb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ unregister_framebuffer(info);
+ vfree(videomemory);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver foxfb_driver = {
+ .probe = foxfb_probe,
+ .remove = foxfb_remove,
+ .driver = {
+ .name = "foxfb",
+ },
+};
+
+static struct platform_device foxfb_device = {
+ .name = "foxfb",
+ .id = 0,
+ .dev = {
+ .release = foxfb_platform_release,
+ }
+};
+
+static int __init foxfb_init(void)
+{
+ int ret = 0;
+ refreshrate = 8;
+ printk(KERN_INFO "fb: Initialising framebuffer\n");
+
+ FOXVHDL_init();
+
+ ret = platform_driver_register(&foxfb_driver);
+
+ if (!ret) {
+ ret = platform_device_register(&foxfb_device);
+ if (ret)
+ platform_driver_unregister(&foxfb_driver);
+ }
+ fb_started = 1;
+ return ret;
+}
+
+static void __exit foxfb_exit(void)
+{
+ platform_device_unregister(&foxfb_device);
+ platform_driver_unregister(&foxfb_driver);
+}
+
+module_exit(foxfb_exit);
+module_init(foxfb_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,20 @@
+// prototypes for foxbone compliant modules
+
+extern unsigned int FOXBONE_release;
+extern unsigned int FOXBONE_application1;
+extern unsigned int FOXBONE_application2;
+extern unsigned int FOXBONE_application3;
+
+void foxbone_write(unsigned int add, unsigned int data);
+
+unsigned int foxbone_read(unsigned int add);
+
+void foxbone_write_next(unsigned data);
+
+unsigned int foxbone_read_next(void);
+
+void foxbone_initialise_bus(void);
+
+void foxbone_lock(void);
+
+void foxbone_unlock(void);
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,691 @@
+/*
+ foxvhdlfb.c
+ Linux Kernel Driver for FoxBone FrameBuffer on FOX VHDL Board
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/uaccess.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+#include "foxbone.h"
+
+
+#if 0
+#define DBG(x) x
+#else
+#define DBG(x)
+#endif
+
+
+/*
+||
+|| FOXVHDL CTL functions
+||
+*/
+
+
+static unsigned char FOXVHDL_current_bank = 0xff;
+
+static unsigned char blitting = 1;
+
+static unsigned char refreshrate = 6;
+
+
+
+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
+ // translate the three color passed in a single 16 bit color word
+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
+ return result;
+}
+
+
+
+
+// wait until the videostate pin has the wanted value
+void FOXVHDL_wait_videostate(unsigned char wait_state){
+/* unsigned char vid_state = 0;
+ unsigned int max_error = 0xffff;
+ //printk("Start wait\n");
+ do {
+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
+ max_error--;
+ } while((vid_state != wait_state)&&(max_error > 10));
+ */
+ DBG(if(max_error < 11){printk("Stop wait\n");};)
+};
+
+
+// choose the bank that we want to display
+// OG5 == 0 --> Bank0
+// OG5 == 1 --> Bank1
+void FOXVHDL_set_bank(unsigned char bank){
+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
+ if(FOXVHDL_current_bank == bank){
+ return;
+ };
+
+ DBG(printk("FOXVHDL_set_bank\n");)
+
+ FOXVHDL_current_bank = bank;
+ foxbone_write(0x7001, FOXVHDL_current_bank);
+
+
+};
+
+
+// blit the bank
+void FOXVHDL_swap_bank(void){
+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));
+};
+
+
+// initialise the I/O pins
+void FOXVHDL_init(void){
+ DBG(printk("FOXVHDL_init\n");)
+
+ FOXVHDL_current_bank = 0;
+
+ FOXVHDL_set_bank(1);
+
+};
+
+/*
+||
+|| FOXVHDL IMAGE FUNCTIONS
+||
+*/
+#define Fox_line_WriteData (1<<2)
+
+// for performance reasons, we do not use the foxbone access functions here
+// we rather use an optimised algorithm. blitting now only takes about 6 ms.
+// meaning we can that effectivley achieve 17 frame. however the refresh rate by
+// default is 4 fps
+
+#if 0
+#define DBG_TIMER(x) x
+#else
+#define DBG_TIMER(x)
+#endif
+
+#if 0
+#define DOUBLE_DATA_RATE
+#endif
+
+void FOXVHDL_blit(unsigned short int *image){
+ unsigned long i;
+ unsigned int fb_ctl_reg;
+
+ if(blitting){
+ foxbone_lock();
+ DBG_TIMER(unsigned long j = jiffies;)
+ // reset the address pointer
+ fb_ctl_reg = foxbone_read(0x7001);
+ fb_ctl_reg |= (1<<4);
+ foxbone_write(0x7001, fb_ctl_reg);
+ fb_ctl_reg &= ~(1<<4);
+ foxbone_write(0x7001, fb_ctl_reg);
+
+ foxbone_write(0x7000, image[0]);
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ *R_PORT_G_DATA = port_g_data_shadow = (port_g_data_shadow & 0xff0000ff);
+
+
+#ifdef DOUBLE_DATA_RATE
+
+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff);
+ for(i = 1; i < 640 * 400; i+=2){
+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8 | Fox_line_WriteData;
+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i+1]<<8;
+ };
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
+
+#else
+
+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
+ for(i = 1; i < 640 * 400; i++){
+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8;
+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
+ };
+#endif
+ foxbone_unlock();
+ FOXVHDL_swap_bank();
+ DBG_TIMER(printk("%ld\n", jiffies - j);)
+
+ };
+};
+
+
+
+
+
+
+/*
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||
+|| FRAMEBUFFER CODE
+||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
+
+*/
+
+
+
+
+#define VIDEOMEMSIZE (640 * 400 * 2) //512K
+
+static void *videomemory;
+static u_long videomemorysize = VIDEOMEMSIZE;
+
+static unsigned char fb_started = 0;
+
+static unsigned char fb_update = 0;
+
+static unsigned char fb_mmap_enable = 0;
+
+static struct fb_var_screeninfo foxfb_default __initdata = {
+ .xres = 640,
+ .yres = 400,
+ .xres_virtual = 640,
+ .yres_virtual = 400,
+ .bits_per_pixel = 16,
+ .red = { 0, 5, 0 },
+ .green = { 5, 6, 0 },
+ .blue = { 11, 5, 0 },
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo foxfb_fix __initdata = {
+ .id = "FOX-VHDL FB",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int foxfb_set_par(struct fb_info *info);
+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
+
+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+static struct fb_ops foxfb_ops = {
+ .fb_check_var = foxfb_check_var,
+ .fb_set_par = foxfb_set_par,
+ .fb_setcolreg = foxfb_setcolreg,
+
+ .fb_pan_display = foxfb_pan_display,
+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect,
+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea,
+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit,
+ .fb_mmap = foxfb_mmap,
+ .fb_ioctl = foxfb_ioctl,
+};
+
+// this function is defined in fbmem.c
+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+// this should be a free one
+#define FOX_FBIOGET_SCREEN 0x4642
+#define FOX_FBBLIT 0x4643
+#define FOX_FB_RATE 0x4645
+#define FOX_FB_TFT 0x4646
+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
+ void __user *argp = (void __user *)arg;
+ unsigned int fb_ctl_reg;
+ switch(cmd){
+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
+ case FOX_FBIOGET_SCREEN:
+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
+ return 0;
+ } else {
+ return -1;
+ };
+ case FOX_FBBLIT:
+ fb_ctl_reg = foxbone_read(0x7001);
+ if(arg){
+ printk("Enable FB\n");
+ fb_ctl_reg &= ~(1<<1);
+ } else {
+ printk("Disable FB\n");
+ fb_ctl_reg |= (1<<1);
+ };
+ blitting = arg;
+ foxbone_write(0x7001, fb_ctl_reg);
+ break;
+ case FOX_FB_RATE:
+ if((arg > 9) || (arg < 1)){
+ printk("fb0 : Illegal refreshrate\n");
+ break;
+ };
+ refreshrate = arg;
+ printk("fb0 : new refreshrate\n");
+ break;
+ case FOX_FB_TFT:
+ fb_ctl_reg = foxbone_read(0x7001);
+ if(arg){
+ printk("Enable TFT\n");
+ fb_ctl_reg |= (1<<3);
+ } else {
+ printk("Disable TFT\n");
+ fb_ctl_reg &= ~(1<<3);
+ };
+ foxbone_write(0x7001, fb_ctl_reg);
+ break;
+ default:
+ return fb_ioctl(inode, file, cmd, arg);
+ };
+ return 0;
+};
+
+// TODO add our own optimized code here
+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
+ cfb_fillrect(info, rect);
+ fb_update = 1;
+};
+
+
+// TODO add our own optimized code here
+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
+ cfb_copyarea(info, area);
+ fb_update = 1;
+};
+
+// TODO add our own optimized code here
+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
+ cfb_imageblit(info, image);
+ fb_update = 1;
+};
+
+
+/*
+ * Internal routines
+ */
+
+static u_long get_line_length(int xres_virtual, int bpp)
+{
+ u_long length;
+
+ length = xres_virtual * bpp;
+ length = (length + 31) & ~31;
+ length >>= 3;
+ return (length);
+}
+
+ /*
+ * Setting the video mode has been split into two parts.
+ * First part, xxxfb_check_var, must not write anything
+ * to hardware, it should only verify and adjust var.
+ * This means it doesn't alter par but it does use hardware
+ * data from it to check this var.
+ */
+
+static int foxfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ u_long line_length;
+
+ if (var->vmode & FB_VMODE_CONUPDATE) {
+ var->vmode |= FB_VMODE_YWRAP;
+ var->xoffset = info->var.xoffset;
+ var->yoffset = info->var.yoffset;
+ }
+
+ var->xres = 640;
+ var->yres = 400;
+
+ var->bits_per_pixel = 16;
+
+ if (var->xres_virtual < var->xoffset + var->xres)
+ var->xres_virtual = var->xoffset + var->xres;
+ if (var->yres_virtual < var->yoffset + var->yres)
+ var->yres_virtual = var->yoffset + var->yres;
+
+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > videomemorysize)
+ return -ENOMEM;
+
+ var->red.offset = 0;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 11;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ return 0;
+}
+
+
+
+/* This routine actually sets the video mode. It's in here where we
+ * the hardware state info->par and fix which can be affected by the
+ * change in par. For this driver it doesn't do much.
+ */
+static int foxfb_set_par(struct fb_info *info){
+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
+ return 0;
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+
+
+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
+ if (regno >= 256) /* no. of hw registers */
+ return 1;
+
+ /* grayscale works only partially under directcolor */
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue =
+ (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+ break;
+ case FB_VISUAL_DIRECTCOLOR:
+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
+ green = CNVT_TOHW(green, 8);
+ blue = CNVT_TOHW(blue, 8);
+ /* hey, there is bug in transp handling... */
+ transp = CNVT_TOHW(transp, 8);
+ break;
+ }
+#undef CNVT_TOHW
+ /* Truecolor has hardware independent palette */
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+
+ if (regno >= 16)
+ return 1;
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ break;
+ case 16:
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ break;
+ case 24:
+ case 32:
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ break;
+ }
+ return 0;
+ }
+ return 0;
+}
+
+
+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->yoffset < 0
+ || var->yoffset >= info->var.yres_virtual
+ || var->xoffset)
+ return -EINVAL;
+ } else {
+ if (var->xoffset + var->xres > info->var.xres_virtual ||
+ var->yoffset + var->yres > info->var.yres_virtual)
+ return -EINVAL;
+ }
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+ return 0;
+}
+
+
+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
+ unsigned long page, pos;
+ unsigned long start = vma->vm_start;
+ unsigned long size = vma->vm_end-vma->vm_start;
+ fb_mmap_enable = 1;
+ printk("mmap : %ld %ld\n", size, (long)info->fix.smem_len);
+ //if (size > info->fix.smem_len){
+ // return -EINVAL;
+ //}
+ pos = (unsigned long) info->screen_base;
+ while (size > 0) {
+ page = page_to_pfn(vmalloc_to_page((void *)pos));
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+ return 0;
+}
+
+
+// our timer
+struct timer_list foxfb_timer;
+
+// are we currently blitting ?
+static unsigned char we_are_blitting = 0;
+
+// the prototype for the callback
+static void foxfb_timer_callback(unsigned long ptr);
+
+
+static void tasklet_foxfb(unsigned long data);
+DECLARE_TASKLET(tl_foxfb_descr, tasklet_foxfb, 0L);
+static void tasklet_foxfb(unsigned long data){
+ if(fb_update || fb_mmap_enable ){
+ FOXVHDL_blit(videomemory);
+ } else {
+ DBG(printk("FBWAIT");)
+ };
+ we_are_blitting = 0;
+ fb_update = 0;
+}
+
+
+// setup the fb timer
+static void foxfb_timer_setup(void){
+ init_timer(&foxfb_timer);
+ foxfb_timer.function = foxfb_timer_callback;
+ foxfb_timer.data = 0;
+ foxfb_timer.expires = jiffies + ( HZ / refreshrate);
+ add_timer(&foxfb_timer);
+};
+
+
+// the timer callback function that detects if the card status has changed
+static void foxfb_timer_callback(unsigned long ptr){
+ if((!we_are_blitting)){
+ we_are_blitting = 1;
+ del_timer(&foxfb_timer);
+ tasklet_schedule(&tl_foxfb_descr);
+ foxfb_timer_setup();
+ };
+};
+
+
+static void foxfb_platform_release(struct device *device){
+ // This is called when the reference count goes to zero.
+}
+
+
+static int __init foxfb_probe(struct platform_device *dev){
+ struct fb_info *info;
+ int retval = -ENOMEM;
+
+ if (!(videomemory = vmalloc(videomemorysize)))
+ return retval;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
+ if (!info)
+ goto err;
+
+ info->screen_base = (char*)videomemory;
+ info->fbops = &foxfb_ops;
+ info->fix.smem_len = videomemorysize;
+ retval = fb_find_mode(&info->var, info, NULL,
+ NULL, 0, NULL, 8);
+
+ if (!retval || (retval == 4))
+ info->var = foxfb_default;
+
+ info->fix = foxfb_fix;
+ info->pseudo_palette = info->par;
+ info->par = NULL;
+ info->flags = FBINFO_FLAG_DEFAULT;
+ //info->cursor.mode &= ~CURSOR_BLINK;
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0)
+ goto err1;
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err2;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+
+ //FOXVHDL_blit(videomemory);
+ foxfb_timer_setup();
+ return 0;
+err2:
+ fb_dealloc_cmap(&info->cmap);
+err1:
+ framebuffer_release(info);
+err:
+ vfree(videomemory);
+ return retval;
+}
+
+static int foxfb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ unregister_framebuffer(info);
+ vfree(videomemory);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver foxfb_driver = {
+ .probe = foxfb_probe,
+ .remove = foxfb_remove,
+ .driver = {
+ .name = "foxfb",
+ },
+};
+
+static struct platform_device foxfb_device = {
+ .name = "foxfb",
+ .id = 0,
+ .dev = {
+ .release = foxfb_platform_release,
+ }
+};
+
+static int __init foxfb_init(void)
+{
+ int ret = 0;
+ refreshrate = 8;
+ printk(KERN_INFO "fb: Initialising framebuffer\n");
+
+ FOXVHDL_init();
+
+ ret = platform_driver_register(&foxfb_driver);
+
+ if (!ret) {
+ ret = platform_device_register(&foxfb_device);
+ if (ret)
+ platform_driver_unregister(&foxfb_driver);
+ }
+ fb_started = 1;
+ return ret;
+}
+
+static void __exit foxfb_exit(void)
+{
+ platform_device_unregister(&foxfb_device);
+ platform_driver_unregister(&foxfb_driver);
+}
+
+module_exit(foxfb_exit);
+module_init(foxfb_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,5 @@
+# Makefile for fox_vhdl drivers
+# 23.04.2006 <mailto:john@phrozen.org>
+
+# the fox_vhdl_framebuffer driver
+obj-$(CONFIG_FOX_VHDL_FB) += foxvhdlfb.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig linux-2.6.19.2/drivers/fox-vhdl/Kconfig
--- linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,274 @@
+menu "Acmesystems FPGA"
+
+config FOX_VHDL
+ bool "Support for FOX-VHDL Board"
+ default n
+
+config FOX_FPGA
+ bool "FPGA flash module"
+ depends on FOX_VHDL
+ help
+ Adds the module needed to flash the fpga from the FOX
+
+config FOXBONE
+ bool "Basic FOXBONE support"
+ depends on FOX_VHDL
+ help
+ Include this to get basic FOXBONE support
+
+config VT
+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
+ select INPUT
+ default y if !VIOCONS
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+
+menu "Framebuffer"
+depends on VT
+
+config FB
+ bool "Support for frame buffer devices"
+ depends on VT
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+config DUMMY_CONSOLE
+ bool "Dummy Console"
+ depends on FB
+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
+ default n
+
+config FRAMEBUFFER_CONSOLE
+ bool "Framebuffer Console support"
+ depends on FB
+ select CRC32
+ help
+ Low-level framebuffer-based console driver.
+config LOGO
+ bool "Bootup logo"
+ depends on FB || SGI_NEWPORT_CONSOLE
+ help
+ Enable and select frame buffer bootup logos.
+
+config LOGO_LINUX_CLUT224
+ bool "Standard 224-color Linux logo"
+ depends on LOGO
+ default y
+config FONTS
+ bool "Select compiled-in fonts"
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ help
+ Say Y here if you would like to use fonts other than the default
+ your frame buffer console usually use.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about foreign fonts.
+
+ If unsure, say N (the default choices are safe).
+
+config FONT_8x8
+ bool "VGA 8x8 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the text console 80x50 (and higher) modes).
+
+ Note that this is a poor quality font. The VGA 8x16 font is quite a
+ lot more readable.
+
+ Given the resolution provided by the frame buffer device, answer N
+ here is safe.
+
+config FONT_8x16
+ bool "VGA 8x16 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the VGA text console 80x25 mode.
+
+ If unsure, say Y.
+
+
+config FOX_VHDL_FB
+ bool "FOX_VHDL Framebuffer"
+ depends on FOXBONE
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VT_CONSOLE
+ select DUMMY_CONSOLE
+ select FRAMEBUFFER_CONSOLE
+ select FONTS
+ select LOGO
+ select LOGO_LINUX_CLUT224
+
+config NANOXKBD
+ bool "nano-X keyboard support"
+ default n
+ depends on FOX_VHDL_FB
+ help
+ Enable the keyboard driver patches for nano-X
+
+
+
+#if FOX_VHDL_FB
+ #source "drivers/video/console/Kconfig"
+#endif
+
+#if FOX_VHDL_FB
+# source "drivers/video/logo/Kconfig"
+#endif
+
+endmenu
+
+
+config FOXBONE_IO
+ bool "FOXBONE I/O pins"
+ depends on FOXBONE
+ help
+ Include this to get access to the I/O pins of the foxbone
+
+config FOXBONE_TIMEBASE
+ bool "FOXBONE Timebase"
+ depends on FOXBONE
+ help
+ Include this to get access to the timebase part of the fpga
+
+config FOXBONE_MMC
+ bool "FOXBONE MMC/SD module"
+ depends on FOXBONE
+ help
+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
+
+config FOXBONE_PWM
+ bool "FOXBONE PWM module"
+ depends on FOXBONE
+ help
+ Include this to enable PWM support into the kernel
+
+config FOXBONE_EVENT
+ bool "FOXBONE EVENT counter module"
+ depends on FOXBONE
+ help
+ Include this to enable foxbone event counter support
+
+config FOXBONE_LOOPBACK
+ bool "FOXBONE Loopback module"
+ depends on FOXBONE
+ help
+ Include this to be able to load the loopback module, that you can base your own driver on
+
+config FOXBONE_MULTIPLY
+ bool "FOXBONE Multiplier example"
+ depends on FOXBONE
+ help
+ Include this to use the 64 bit multiplier
+
+menu "FOXBONE interrupt handlers"
+config FOXBONE_SAMPLE_ISR
+ bool "FOXBONE example interrupt handlers"
+ depends on FOXBONE
+
+config FOXBONE_INT14
+ bool "Int 14 - bit 0 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
+
+config FOXBONE_INT31
+ bool "Int 31 - bit 1 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
+
+endmenu
+
+
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
+ help
+ use if no framebuffer is enabled console=ttyS0
+ use if framebuffer is enabled console=tty0
+
+endmenu
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_NANOXKBD) += nanoxkbd.o
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c
--- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,173 @@
+/*
+ nanoxkbd.c
+ Linux Kernel Driver for Nanox Keyboard driver for FOX VHDL Board framebuffer
+ (based on FoxBone protocol interface specifications rel 0.7)
+ For more info see: http://www.acmesystems.it/?id=120
+ Author: John Crispin
+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
+
+ This is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This example is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ To have a copy of the GNU General Public License write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+
+#define DEV_NAME "keyboard"
+#define DEV_MAJOR 195
+
+
+unsigned char nanoxkbd_is_open = 0;
+
+#define MAX_KEYS 128
+unsigned int keys[MAX_KEYS];
+unsigned char keys_count = 0;
+unsigned char keys_pos = 0;
+
+#define IOCTL_NANOXKBD_GET 0x7878
+
+unsigned char nanoxkbd_add(unsigned int keycode){
+ if(nanoxkbd_is_open){
+ if(keys_count < MAX_KEYS){
+ keys[(keys_pos + keys_count) % MAX_KEYS] = keycode;
+ keys_count++;
+ printk("got key %d, %d, %d\n", keycode, keys_pos, keys_count);
+ };
+ return 1;
+ };
+ return 0;
+};
+
+// the app has send us some control data
+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
+ int retval = 0;
+ switch (cmd) {
+ case IOCTL_NANOXKBD_GET:
+ if(keys_count > 0){
+ keys_count--;
+ copy_to_user((char*)arg, (char*)&keys[keys_pos], sizeof(unsigned int));
+ keys_pos++;
+ if(keys_pos >= MAX_KEYS){
+ keys_pos = 0;
+ };
+ retval = 1;
+ };
+ break;
+
+ default:
+ printk("nanoxkbd: unknown ioctl\n");
+ break;
+ }
+
+ return retval;
+};
+
+
+
+static int module_open(struct inode *inode, struct file *file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // we only supprt minor 0 at the moment
+ if(dev_minor != 0){
+ printk("nanoxkbd: trying to access unknown minor device -> %d\n", dev_minor);
+ return -ENODEV;
+ }
+
+ // check if another app is currently using the device
+ if(nanoxkbd_is_open) {
+ printk("nanoxkbd: Device with minor ID %d already in use\n", dev_minor);
+ return -EBUSY;
+ }
+ nanoxkbd_is_open = 1;
+
+ // more flaming
+ printk("nanoxkbd: Minor %d has been opened\n", dev_minor);
+ return 0;
+};
+
+
+// gets called when an app closes the device
+static int module_close(struct inode * inode, struct file * file){
+ // Which minor device is the user trying to access ?
+ unsigned int dev_minor = MINOR(inode->i_rdev);
+
+ // remember that the device has been closed
+ nanoxkbd_is_open = 0;
+
+
+ // more flaming
+ printk("nanoxkbd: Minor %d has been closed\n", dev_minor);
+
+ return 0;
+};
+
+// so the kernel knows which functions to access for a given operation
+struct file_operations nanoxkbd_module_fops = {
+ ioctl: module_ioctl,
+ open: module_open,
+ release: module_close
+};
+
+
+// module gets loaded into kernel / char dev is registered
+static int __init mod_init(void){
+ // flame the kprintk
+ printk("nanoxkbd: FOX-VHDL FPGA io module\n");
+ //printk("nanoxkbd: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
+ //printk("nanoxkbd: Starting ...\n");
+
+ // register the character device
+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &nanoxkbd_module_fops)) {
+ printk( "nanoxkbd: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
+ return( -ENODEV );
+ };
+
+
+ // remember that the driver has been opened
+ nanoxkbd_is_open = 0;
+ printk("nanoxkbd: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
+ return 0;
+}
+
+
+// we are done so shut everything down
+static void __exit mod_exit(void){
+ printk( "nanoxkbd: Cleanup\n" );
+ // tell the kernel that the device is not needed anymore
+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
+
+}
+
+module_init (mod_init);
+module_exit (mod_exit);
+
+
+
+
+
+
diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile linux-2.6.19.2/drivers/fox-vhdl/Makefile
--- linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/drivers/fox-vhdl/Makefile 2007-06-17 02:46:15.000000000 +0200
@@ -0,0 +1,13 @@
+#
+# Makefile for the i2c core.
+#
+obj-$(CONFIG_FOXBONE) += foxbone/
+obj-$(CONFIG_FOX_VHDL_FB) += fox_vhdl_fb/
+obj-$(CONFIG_FOX_FPGA) += fox_fpga_flash/
+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm/
+obj-$(CONFIG_FOXBONE_IO) += fox_io/
+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase/
+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback/
+obj-$(CONFIG_FOXBONE_EVENT) += fox_event/
+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply/
+obj-$(CONFIG_NANOXKBD) += keyboard/
--- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
@@ -1,244 +1,274 @@
-#
-# For a description of the syntax of this configuration file,
-# see the Configure script.
-#
+menu "Acmesystems FPGA"
-mainmenu "Linux/CRIS Kernel Configuration"
-
-config MMU
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_IOMAP
- bool
- default y
-
-config GENERIC_FIND_NEXT_BIT
- bool
- default y
-
-config GENERIC_HWEIGHT
- bool
+config FOX_VHDL
+ bool "Support for FOX-VHDL Board"
+ default n
+
+config FOX_FPGA
+ bool "FPGA flash module"
+ depends on FOX_VHDL
+ help
+ Adds the module needed to flash the fpga from the FOX
+
+config FOXBONE
+ bool "Basic FOXBONE support"
+ depends on FOX_VHDL
+ help
+ Include this to get basic FOXBONE support
+
+config VT
+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
+ select INPUT
+ default y if !VIOCONS
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+
+menu "Framebuffer"
+depends on VT
+
+config FB
+ bool "Support for frame buffer devices"
+ depends on VT
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+config DUMMY_CONSOLE
+ bool "Dummy Console"
+ depends on FB
+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
+ default n
+
+config FRAMEBUFFER_CONSOLE
+ bool "Framebuffer Console support"
+ depends on FB
+ select CRC32
+ help
+ Low-level framebuffer-based console driver.
+config LOGO
+ bool "Bootup logo"
+ depends on FB || SGI_NEWPORT_CONSOLE
+ help
+ Enable and select frame buffer bootup logos.
+
+config LOGO_LINUX_CLUT224
+ bool "Standard 224-color Linux logo"
+ depends on LOGO
default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config IRQ_PER_CPU
- bool
- default y
-
-config CRIS
- bool
- default y
-
-source "init/Kconfig"
-
-menu "General setup"
-
-source "fs/Kconfig.binfmt"
-
-config GENERIC_HARDIRQS
- bool
- default y
-
-config SMP
- bool "SMP"
- help
- SMP support. Always Say N.
-
-config NR_CPUS
- int
- depends on SMP
- default 2
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-config ETRAX_CMDLINE
- string "Kernel command line"
- default "root=/dev/mtdblock3"
- help
- Pass additional commands to the kernel.
-
-config ETRAX_WATCHDOG
- bool "Enable ETRAX watchdog"
- help
- Enable the built-in watchdog timer support on ETRAX based embedded
- network computers.
-
-config ETRAX_WATCHDOG_NICE_DOGGY
- bool "Disable watchdog during Oops printouts"
- depends on ETRAX_WATCHDOG
- help
- By enabling this you make sure that the watchdog does not bite while
- printing oopses. Recommended for development systems but not for
- production releases.
-
-config ETRAX_FAST_TIMER
- bool "Enable ETRAX fast timer API"
- help
- This options enables the API to a fast timer implementation using
- timer1 to get sub jiffie resolution timers (primarily one-shot
- timers).
- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
-
-config OOM_REBOOT
- bool "Enable reboot at out of memory"
-
-source "kernel/Kconfig.preempt"
-source "kernel/Kconfig.sched"
-
-source mm/Kconfig
+config FONTS
+ bool "Select compiled-in fonts"
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ help
+ Say Y here if you would like to use fonts other than the default
+ your frame buffer console usually use.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about foreign fonts.
+
+ If unsure, say N (the default choices are safe).
+
+config FONT_8x8
+ bool "VGA 8x8 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the text console 80x50 (and higher) modes).
+
+ Note that this is a poor quality font. The VGA 8x16 font is quite a
+ lot more readable.
+
+ Given the resolution provided by the frame buffer device, answer N
+ here is safe.
+
+config FONT_8x16
+ bool "VGA 8x16 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the VGA text console 80x25 mode.
+
+ If unsure, say Y.
+
+
+config FOX_VHDL_FB
+ bool "FOX_VHDL Framebuffer"
+ depends on FOXBONE
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VT_CONSOLE
+ select DUMMY_CONSOLE
+ select FRAMEBUFFER_CONSOLE
+ select FONTS
+ select LOGO
+ select LOGO_LINUX_CLUT224
+
+config NANOXKBD
+ bool "nano-X keyboard support"
+ default n
+ depends on FOX_VHDL_FB
+ help
+ Enable the keyboard driver patches for nano-X
+
+
+
+#if FOX_VHDL_FB
+ #source "drivers/video/console/Kconfig"
+#endif
+
+#if FOX_VHDL_FB
+# source "drivers/video/logo/Kconfig"
+#endif
endmenu
-menu "Hardware setup"
-
-choice
- prompt "Processor type"
- default ETRAX100LX
-config ETRAX100LX
- bool "ETRAX-100LX-v1"
+config FOXBONE_IO
+ bool "FOXBONE I/O pins"
+ depends on FOXBONE
help
- Support version 1 of the ETRAX 100LX.
+ Include this to get access to the I/O pins of the foxbone
-config ETRAX100LX_V2
- bool "ETRAX-100LX-v2"
+config FOXBONE_TIMEBASE
+ bool "FOXBONE Timebase"
+ depends on FOXBONE
help
- Support version 2 of the ETRAX 100LX.
+ Include this to get access to the timebase part of the fpga
-config SVINTO_SIM
- bool "ETRAX-100LX-for-xsim-simulator"
+config FOXBONE_MMC
+ bool "FOXBONE MMC/SD module"
+ depends on FOXBONE
help
- Support the xsim ETRAX Simulator.
+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-config ETRAXFS
- bool "ETRAX-FS-V32"
+config FOXBONE_PWM
+ bool "FOXBONE PWM module"
+ depends on FOXBONE
help
- Support CRIS V32.
+ Include this to enable PWM support into the kernel
-config ETRAXFS_SIM
- bool "ETRAX-FS-V32-Simulator"
+config FOXBONE_EVENT
+ bool "FOXBONE EVENT counter module"
+ depends on FOXBONE
help
- Support CRIS V32 VCS simualtor.
+ Include this to enable foxbone event counter support
-endchoice
-
-config ETRAX_ARCH_V10
- bool
- default y if ETRAX100LX || ETRAX100LX_V2
- default n if !(ETRAX100LX || ETRAX100LX_V2)
-
-config ETRAX_ARCH_V32
- bool
- default y if ETRAXFS || ETRAXFS_SIM
- default n if !(ETRAXFS || ETRAXFS_SIM)
-
-config ETRAX_DRAM_SIZE
- int "DRAM size (dec, in MB)"
- default "8"
+config FOXBONE_LOOPBACK
+ bool "FOXBONE Loopback module"
+ depends on FOXBONE
help
- Size of DRAM (decimal in MB) typically 2, 8 or 16.
+ Include this to be able to load the loopback module, that you can base your own driver on
-config ETRAX_FLASH_BUSWIDTH
- int "Buswidth of NOR flash in bytes"
- default "2"
+config FOXBONE_MULTIPLY
+ bool "FOXBONE Multiplier example"
+ depends on FOXBONE
help
- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
+ Include this to use the 64 bit multiplier
-config ETRAX_NANDFLASH_BUSWIDTH
- int "Buswidth of NAND flash in bytes"
- default "1"
- help
- Width in bytes of the NAND flash (1 or 2).
+menu "FOXBONE interrupt handlers"
+config FOXBONE_SAMPLE_ISR
+ bool "FOXBONE example interrupt handlers"
+ depends on FOXBONE
+
+config FOXBONE_INT14
+ bool "Int 14 - bit 0 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
-config ETRAX_FLASH1_SIZE
- int "FLASH1 size (dec, in MB. 0 = Unknown)"
- default "0"
+config FOXBONE_INT31
+ bool "Int 31 - bit 1 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
-# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-source arch/cris/arch/Kconfig
+endmenu
-endmenu
-
-source "net/Kconfig"
-
-# bring in ETRAX built-in drivers
-menu "Drivers for built-in interfaces"
-# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-source arch/cris/arch/drivers/Kconfig
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
+ help
+ use if no framebuffer is enabled console=ttyS0
+ use if framebuffer is enabled console=tty0
+
endmenu
-
-source "drivers/base/Kconfig"
-
-# standard linux drivers
-source "drivers/mtd/Kconfig"
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/telephony/Kconfig"
-
-source "drivers/cdrom/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/cris/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
--- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
@@ -1,244 +1,274 @@
-#
-# For a description of the syntax of this configuration file,
-# see the Configure script.
-#
+menu "Acmesystems FPGA"
-mainmenu "Linux/CRIS Kernel Configuration"
-
-config MMU
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_IOMAP
- bool
- default y
-
-config GENERIC_FIND_NEXT_BIT
- bool
- default y
-
-config GENERIC_HWEIGHT
- bool
+config FOX_VHDL
+ bool "Support for FOX-VHDL Board"
+ default n
+
+config FOX_FPGA
+ bool "FPGA flash module"
+ depends on FOX_VHDL
+ help
+ Adds the module needed to flash the fpga from the FOX
+
+config FOXBONE
+ bool "Basic FOXBONE support"
+ depends on FOX_VHDL
+ help
+ Include this to get basic FOXBONE support
+
+config VT
+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
+ select INPUT
+ default y if !VIOCONS
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+
+menu "Framebuffer"
+depends on VT
+
+config FB
+ bool "Support for frame buffer devices"
+ depends on VT
+ ---help---
+ The frame buffer device provides an abstraction for the graphics
+ hardware. It represents the frame buffer of some video hardware and
+ allows application software to access the graphics hardware through
+ a well-defined interface, so the software doesn't need to know
+ anything about the low-level (hardware register) stuff.
+
+ Frame buffer devices work identically across the different
+ architectures supported by Linux and make the implementation of
+ application programs easier and more portable; at this point, an X
+ server exists which uses the frame buffer device exclusively.
+ On several non-X86 architectures, the frame buffer device is the
+ only way to use the graphics hardware.
+
+ The device is accessed through special device nodes, usually located
+ in the /dev directory, i.e. /dev/fb*.
+
+ You need an utility program called fbset to make full use of frame
+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+ and the Framebuffer-HOWTO at
+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ information.
+
+ Say Y here and to the driver for your graphics board below if you
+ are compiling a kernel for a non-x86 architecture.
+
+ If you are compiling for the x86 architecture, you can say Y if you
+ want to play with it, but it is not essential. Please note that
+ running graphical applications that directly touch the hardware
+ (e.g. an accelerated X server) and that are not frame buffer
+ device-aware may cause unexpected results. If unsure, say N.
+
+config FB_CFB_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version.
+
+config FB_CFB_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version.
+
+config FB_CFB_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the cfb_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version.
+config DUMMY_CONSOLE
+ bool "Dummy Console"
+ depends on FB
+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
+ default n
+
+config FRAMEBUFFER_CONSOLE
+ bool "Framebuffer Console support"
+ depends on FB
+ select CRC32
+ help
+ Low-level framebuffer-based console driver.
+config LOGO
+ bool "Bootup logo"
+ depends on FB || SGI_NEWPORT_CONSOLE
+ help
+ Enable and select frame buffer bootup logos.
+
+config LOGO_LINUX_CLUT224
+ bool "Standard 224-color Linux logo"
+ depends on LOGO
default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config IRQ_PER_CPU
- bool
- default y
-
-config CRIS
- bool
- default y
-
-source "init/Kconfig"
-
-menu "General setup"
-
-source "fs/Kconfig.binfmt"
-
-config GENERIC_HARDIRQS
- bool
- default y
-
-config SMP
- bool "SMP"
- help
- SMP support. Always Say N.
-
-config NR_CPUS
- int
- depends on SMP
- default 2
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-config ETRAX_CMDLINE
- string "Kernel command line"
- default "root=/dev/mtdblock3"
- help
- Pass additional commands to the kernel.
-
-config ETRAX_WATCHDOG
- bool "Enable ETRAX watchdog"
- help
- Enable the built-in watchdog timer support on ETRAX based embedded
- network computers.
-
-config ETRAX_WATCHDOG_NICE_DOGGY
- bool "Disable watchdog during Oops printouts"
- depends on ETRAX_WATCHDOG
- help
- By enabling this you make sure that the watchdog does not bite while
- printing oopses. Recommended for development systems but not for
- production releases.
-
-config ETRAX_FAST_TIMER
- bool "Enable ETRAX fast timer API"
- help
- This options enables the API to a fast timer implementation using
- timer1 to get sub jiffie resolution timers (primarily one-shot
- timers).
- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
-
-config OOM_REBOOT
- bool "Enable reboot at out of memory"
-
-source "kernel/Kconfig.preempt"
-source "kernel/Kconfig.sched"
-
-source mm/Kconfig
+config FONTS
+ bool "Select compiled-in fonts"
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ help
+ Say Y here if you would like to use fonts other than the default
+ your frame buffer console usually use.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about foreign fonts.
+
+ If unsure, say N (the default choices are safe).
+
+config FONT_8x8
+ bool "VGA 8x8 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the text console 80x50 (and higher) modes).
+
+ Note that this is a poor quality font. The VGA 8x16 font is quite a
+ lot more readable.
+
+ Given the resolution provided by the frame buffer device, answer N
+ here is safe.
+
+config FONT_8x16
+ bool "VGA 8x16 font" if FONTS
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
+ default y if !SPARC && !FONTS
+ help
+ This is the "high resolution" font for the VGA frame buffer (the one
+ provided by the VGA text console 80x25 mode.
+
+ If unsure, say Y.
+
+
+config FOX_VHDL_FB
+ bool "FOX_VHDL Framebuffer"
+ depends on FOXBONE
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VT_CONSOLE
+ select DUMMY_CONSOLE
+ select FRAMEBUFFER_CONSOLE
+ select FONTS
+ select LOGO
+ select LOGO_LINUX_CLUT224
+
+config NANOXKBD
+ bool "nano-X keyboard support"
+ default n
+ depends on FOX_VHDL_FB
+ help
+ Enable the keyboard driver patches for nano-X
+
+
+
+#if FOX_VHDL_FB
+ #source "drivers/video/console/Kconfig"
+#endif
+
+#if FOX_VHDL_FB
+# source "drivers/video/logo/Kconfig"
+#endif
endmenu
-menu "Hardware setup"
-
-choice
- prompt "Processor type"
- default ETRAX100LX
-config ETRAX100LX
- bool "ETRAX-100LX-v1"
+config FOXBONE_IO
+ bool "FOXBONE I/O pins"
+ depends on FOXBONE
help
- Support version 1 of the ETRAX 100LX.
+ Include this to get access to the I/O pins of the foxbone
-config ETRAX100LX_V2
- bool "ETRAX-100LX-v2"
+config FOXBONE_TIMEBASE
+ bool "FOXBONE Timebase"
+ depends on FOXBONE
help
- Support version 2 of the ETRAX 100LX.
+ Include this to get access to the timebase part of the fpga
-config SVINTO_SIM
- bool "ETRAX-100LX-for-xsim-simulator"
+config FOXBONE_MMC
+ bool "FOXBONE MMC/SD module"
+ depends on FOXBONE
help
- Support the xsim ETRAX Simulator.
+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-config ETRAXFS
- bool "ETRAX-FS-V32"
+config FOXBONE_PWM
+ bool "FOXBONE PWM module"
+ depends on FOXBONE
help
- Support CRIS V32.
+ Include this to enable PWM support into the kernel
-config ETRAXFS_SIM
- bool "ETRAX-FS-V32-Simulator"
+config FOXBONE_EVENT
+ bool "FOXBONE EVENT counter module"
+ depends on FOXBONE
help
- Support CRIS V32 VCS simualtor.
+ Include this to enable foxbone event counter support
-endchoice
-
-config ETRAX_ARCH_V10
- bool
- default y if ETRAX100LX || ETRAX100LX_V2
- default n if !(ETRAX100LX || ETRAX100LX_V2)
-
-config ETRAX_ARCH_V32
- bool
- default y if ETRAXFS || ETRAXFS_SIM
- default n if !(ETRAXFS || ETRAXFS_SIM)
-
-config ETRAX_DRAM_SIZE
- int "DRAM size (dec, in MB)"
- default "8"
+config FOXBONE_LOOPBACK
+ bool "FOXBONE Loopback module"
+ depends on FOXBONE
help
- Size of DRAM (decimal in MB) typically 2, 8 or 16.
+ Include this to be able to load the loopback module, that you can base your own driver on
-config ETRAX_FLASH_BUSWIDTH
- int "Buswidth of NOR flash in bytes"
- default "2"
+config FOXBONE_MULTIPLY
+ bool "FOXBONE Multiplier example"
+ depends on FOXBONE
help
- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
+ Include this to use the 64 bit multiplier
-config ETRAX_NANDFLASH_BUSWIDTH
- int "Buswidth of NAND flash in bytes"
- default "1"
- help
- Width in bytes of the NAND flash (1 or 2).
+menu "FOXBONE interrupt handlers"
+config FOXBONE_SAMPLE_ISR
+ bool "FOXBONE example interrupt handlers"
+ depends on FOXBONE
+
+config FOXBONE_INT14
+ bool "Int 14 - bit 0 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
-config ETRAX_FLASH1_SIZE
- int "FLASH1 size (dec, in MB. 0 = Unknown)"
- default "0"
+config FOXBONE_INT31
+ bool "Int 31 - bit 1 of reg 0x13 set"
+ depends on FOXBONE_SAMPLE_ISR
-# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-source arch/cris/arch/Kconfig
+endmenu
-endmenu
-
-source "net/Kconfig"
-
-# bring in ETRAX built-in drivers
-menu "Drivers for built-in interfaces"
-# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-source arch/cris/arch/drivers/Kconfig
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
+ help
+ use if no framebuffer is enabled console=ttyS0
+ use if framebuffer is enabled console=tty0
+
endmenu
-
-source "drivers/base/Kconfig"
-
-# standard linux drivers
-source "drivers/mtd/Kconfig"
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/telephony/Kconfig"
-
-source "drivers/cdrom/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/cris/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
--- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
+++ linux-2.6.19.2/arch/cris/Kconfig 2007-06-17 02:52:11.000000000 +0200
@@ -242,3 +242,6 @@
source "crypto/Kconfig"
source "lib/Kconfig"
+menu "Acmesystems"
+source "drivers/fox-vhdl/Kconfig"
+endmenu
79a80
> obj-$(CONFIG_FOX_VHDL) += fox-vhdl/
diff -urN linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h linux-2.6.19.2/include/linux/foxbone_syscalls.h
--- linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2/include/linux/foxbone_syscalls.h 2007-06-17 03:31:39.000000000 +0200
@@ -0,0 +1,18 @@
+#ifndef __LINUX_SYSCALL_FOXBONE
+#define __LINUX_SYSCALL_FOXBONE
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <asm/unistd.h>
+
+extern int errno;
+_syscall1(void, foxbonereset, unsigned short int, reg);
+_syscall1(unsigned short int, foxboneread, unsigned short int, reg);
+_syscall2(void, foxbonewrite, unsigned short int, reg, unsigned short int, value);
+_syscall3(void, foxbonebulkread, unsigned short int, reg, unsigned short int *, value, unsigned int, length);
+_syscall3(void, foxbonebulkwrite, unsigned short int, reg, unsigned short int *, value, unsigned int, length);
+_syscall2(void, foxboneintreg, unsigned long int, interrupt, unsigned char, state);
+_syscall1(unsigned int, foxboneintcheck, unsigned long int, interrupt);
+_syscall2(unsigned int, foxboneintwait, unsigned long int, interrupt, unsigned char, timeout);
+
+#endif
View Git Blame Copy Permalink