juhosg 6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 ... The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73		2011-12-13 14:59:40 +00:00
..
imagebuilder	[imagebuilder] Various enhancements from Manuel Munz <freifunk@somakoma.de>	2011-09-09 17:25:20 +00:00
linux	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2	2011-12-13 14:59:40 +00:00
sdk	[sdk] fix generation for arm platforms	2011-09-13 07:39:14 +00:00
toolchain	target/toolchain: fix installation after r22723	2010-09-04 11:56:33 +00:00
Config.in	mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus	2011-01-16 01:25:06 +00:00
Makefile	Add a target (CONFIG_MAKE_CONFIG) that creates an exportable toolchain. The toolchain will zipped and saved under $(TOPDIR)/bin directory.	2009-11-14 17:51:32 +00:00