qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 13:14:39 +02:00
Code
6cc1945af5
openwrt-xburst/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch
florian 238839d6be [kernel] backport SPI master with no RXTX support (from 2.6.36) 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:39 +00:00

218 lines
7.4 KiB
Diff
Raw Blame History

From 3c8e1a84fd6b984a7bce8816db2e3defc57bbfe4 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 30 Jun 2010 14:27:37 -0600
Subject: [PATCH] spi/spi-gpio: add support for controllers without MISO or MOSI pin
There are some boards that do not strictly follow SPI standard and use
only 3 wires (SCLK, MOSI or MISO, SS) for connecting some simple auxiliary
chips and controls them with GPIO based 'spi controller'. In this
configuration the MISO or MOSI line is missing (it is not required if the
chip does not transfer any data back to host or host only reads data from
chip).
This patch adds support for such non-standard configuration in GPIO-based
SPI controller. It has been tested in configuration without MISO pin.
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/spi/spi_gpio.c | 101 ++++++++++++++++++++++++++++++++++-------
include/linux/spi/spi_gpio.h | 5 ++
2 files changed, 88 insertions(+), 18 deletions(-)
--- a/drivers/spi/spi_gpio.c
+++ b/drivers/spi/spi_gpio.c
@@ -178,6 +178,44 @@ static u32 spi_gpio_txrx_word_mode3(stru
return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
}
+/*
+ * These functions do not call setmosi or getmiso if respective flag
+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * call when such pin is not present or defined in the controller.
+ * A separate set of callbacks is defined to get highest possible
+ * speed in the generic case (when both MISO and MOSI lines are
+ * available), as optimiser will remove the checks when argument is
+ * constant.
+ */
+
+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ unsigned flags = spi->master->flags;
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
+}
+
/*----------------------------------------------------------------------*/
static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
@@ -243,19 +281,30 @@ static int __devinit spi_gpio_alloc(unsi
}
static int __devinit
-spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
+ u16 *res_flags)
{
int value;
/* NOTE: SPI_*_GPIO symbols may reference "pdata" */
- value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
- if (value)
- goto done;
-
- value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
- if (value)
- goto free_mosi;
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
+ value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
+ if (value)
+ goto done;
+ } else {
+ /* HW configuration without MOSI pin */
+ *res_flags |= SPI_MASTER_NO_TX;
+ }
+
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
+ value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
+ if (value)
+ goto free_mosi;
+ } else {
+ /* HW configuration without MISO pin */
+ *res_flags |= SPI_MASTER_NO_RX;
+ }
value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
if (value)
@@ -264,9 +313,11 @@ spi_gpio_request(struct spi_gpio_platfor
goto done;
free_miso:
- gpio_free(SPI_MISO_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
free_mosi:
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
done:
return value;
}
@@ -277,6 +328,7 @@ static int __devinit spi_gpio_probe(stru
struct spi_master *master;
struct spi_gpio *spi_gpio;
struct spi_gpio_platform_data *pdata;
+ u16 master_flags = 0;
pdata = pdev->dev.platform_data;
#ifdef GENERIC_BITBANG
@@ -284,7 +336,7 @@ static int __devinit spi_gpio_probe(stru
return -ENODEV;
#endif
- status = spi_gpio_request(pdata, dev_name(&pdev->dev));
+ status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
if (status < 0)
return status;
@@ -300,6 +352,7 @@ static int __devinit spi_gpio_probe(stru
if (pdata)
spi_gpio->pdata = *pdata;
+ master->flags = master_flags;
master->bus_num = pdev->id;
master->num_chipselect = SPI_N_CHIPSEL;
master->setup = spi_gpio_setup;
@@ -307,10 +360,18 @@ static int __devinit spi_gpio_probe(stru
spi_gpio->bitbang.master = spi_master_get(master);
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
- spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
- spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
- spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
- spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+
+ if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+ } else {
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
+ }
spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
spi_gpio->bitbang.flags = SPI_CS_HIGH;
@@ -318,8 +379,10 @@ static int __devinit spi_gpio_probe(stru
if (status < 0) {
spi_master_put(spi_gpio->bitbang.master);
gpio_free:
- gpio_free(SPI_MISO_GPIO);
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
gpio_free(SPI_SCK_GPIO);
spi_master_put(master);
}
@@ -342,8 +405,10 @@ static int __devexit spi_gpio_remove(str
platform_set_drvdata(pdev, NULL);
- gpio_free(SPI_MISO_GPIO);
- gpio_free(SPI_MOSI_GPIO);
+ if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+ gpio_free(SPI_MISO_GPIO);
+ if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+ gpio_free(SPI_MOSI_GPIO);
gpio_free(SPI_SCK_GPIO);
return status;
--- a/include/linux/spi/spi_gpio.h
+++ b/include/linux/spi/spi_gpio.h
@@ -29,11 +29,16 @@
* SPI_GPIO_NO_CHIPSELECT to the controller_data:
* .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
*
+ * If the MISO or MOSI pin is not available then it should be set to
+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
+ *
* If the bitbanged bus is later switched to a "native" controller,
* that platform_device and controller_data should be removed.
*/
#define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l)
+#define SPI_GPIO_NO_MISO ((unsigned long)-1l)
+#define SPI_GPIO_NO_MOSI ((unsigned long)-1l)
/**
* struct spi_gpio_platform_data - parameter for bitbanged SPI master
View Git Blame Copy Permalink