mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-19 00:19:42 +02:00
9bb8c69134
Add basic support for the internal ethernet switch on bcm6368. It behaves as a dumb switch for now, but allows basic connectivity. Also drop the ethernet patch for bcm6345 for now, it needs rework. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31129 3c298f89-4303-0410-b956-a3cf2f4a3e73
170 lines
4.7 KiB
Diff
170 lines
4.7 KiB
Diff
From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
|
|
From: Jonas Gorski <jonas.gorski@gmail.com>
|
|
Date: Fri, 6 Jan 2012 12:24:18 +0100
|
|
Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
|
|
|
|
Only connect/disconnect the phy during probe and remove, not during any
|
|
open/close. The phy seldom changes during the runtime, and disconnecting
|
|
the phy during close will prevent it from keeping any configuration over
|
|
a down/up cycle.
|
|
|
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
---
|
|
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 84 +++++++++++++-------------
|
|
1 files changed, 41 insertions(+), 43 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
|
|
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
|
|
@@ -784,10 +784,8 @@ static int bcm_enet_open(struct net_devi
|
|
struct bcm_enet_priv *priv;
|
|
struct sockaddr addr;
|
|
struct device *kdev;
|
|
- struct phy_device *phydev;
|
|
int i, ret;
|
|
unsigned int size;
|
|
- char phy_id[MII_BUS_ID_SIZE + 3];
|
|
void *p;
|
|
u32 val;
|
|
|
|
@@ -795,40 +793,10 @@ static int bcm_enet_open(struct net_devi
|
|
kdev = &priv->pdev->dev;
|
|
|
|
if (priv->has_phy) {
|
|
- /* connect to PHY */
|
|
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
|
|
- priv->mii_bus->id, priv->phy_id);
|
|
-
|
|
- phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
|
|
- PHY_INTERFACE_MODE_MII);
|
|
-
|
|
- if (IS_ERR(phydev)) {
|
|
- dev_err(kdev, "could not attach to PHY\n");
|
|
- return PTR_ERR(phydev);
|
|
- }
|
|
-
|
|
- /* mask with MAC supported features */
|
|
- phydev->supported &= (SUPPORTED_10baseT_Half |
|
|
- SUPPORTED_10baseT_Full |
|
|
- SUPPORTED_100baseT_Half |
|
|
- SUPPORTED_100baseT_Full |
|
|
- SUPPORTED_Autoneg |
|
|
- SUPPORTED_Pause |
|
|
- SUPPORTED_MII);
|
|
- phydev->advertising = phydev->supported;
|
|
-
|
|
- if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
|
|
- phydev->advertising |= SUPPORTED_Pause;
|
|
- else
|
|
- phydev->advertising &= ~SUPPORTED_Pause;
|
|
-
|
|
- dev_info(kdev, "attached PHY at address %d [%s]\n",
|
|
- phydev->addr, phydev->drv->name);
|
|
-
|
|
+ /* Reset state */
|
|
priv->old_link = 0;
|
|
priv->old_duplex = -1;
|
|
priv->old_pause = -1;
|
|
- priv->phydev = phydev;
|
|
}
|
|
|
|
/* mask all interrupts and request them */
|
|
@@ -838,7 +806,7 @@ static int bcm_enet_open(struct net_devi
|
|
|
|
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
|
|
if (ret)
|
|
- goto out_phy_disconnect;
|
|
+ return ret;
|
|
|
|
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
|
|
dev->name, dev);
|
|
@@ -1025,9 +993,6 @@ out_freeirq_rx:
|
|
out_freeirq:
|
|
free_irq(dev->irq, dev);
|
|
|
|
-out_phy_disconnect:
|
|
- phy_disconnect(priv->phydev);
|
|
-
|
|
return ret;
|
|
}
|
|
|
|
@@ -1132,12 +1097,6 @@ static int bcm_enet_stop(struct net_devi
|
|
free_irq(priv->irq_rx, dev);
|
|
free_irq(dev->irq, dev);
|
|
|
|
- /* release phy */
|
|
- if (priv->has_phy) {
|
|
- phy_disconnect(priv->phydev);
|
|
- priv->phydev = NULL;
|
|
- }
|
|
-
|
|
return 0;
|
|
}
|
|
|
|
@@ -1714,6 +1673,8 @@ static int __devinit bcm_enet_probe(stru
|
|
|
|
/* MII bus registration */
|
|
if (priv->has_phy) {
|
|
+ struct phy_device *phydev;
|
|
+ char phy_id[MII_BUS_ID_SIZE + 3];
|
|
|
|
priv->mii_bus = mdiobus_alloc();
|
|
if (!priv->mii_bus) {
|
|
@@ -1750,6 +1711,38 @@ static int __devinit bcm_enet_probe(stru
|
|
dev_err(&pdev->dev, "unable to register mdio bus\n");
|
|
goto out_free_mdio;
|
|
}
|
|
+
|
|
+ /* connect to PHY */
|
|
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
|
|
+ priv->mii_bus->id, priv->phy_id);
|
|
+
|
|
+ phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
|
|
+ PHY_INTERFACE_MODE_MII);
|
|
+
|
|
+ if (IS_ERR(phydev)) {
|
|
+ dev_err(&pdev->dev, "could not attach to PHY\n");
|
|
+ goto out_unregister_mdio;
|
|
+ }
|
|
+
|
|
+ /* mask with MAC supported features */
|
|
+ phydev->supported &= (SUPPORTED_10baseT_Half |
|
|
+ SUPPORTED_10baseT_Full |
|
|
+ SUPPORTED_100baseT_Half |
|
|
+ SUPPORTED_100baseT_Full |
|
|
+ SUPPORTED_Autoneg |
|
|
+ SUPPORTED_Pause |
|
|
+ SUPPORTED_MII);
|
|
+ phydev->advertising = phydev->supported;
|
|
+
|
|
+ if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
|
|
+ phydev->advertising |= SUPPORTED_Pause;
|
|
+ else
|
|
+ phydev->advertising &= ~SUPPORTED_Pause;
|
|
+
|
|
+ dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
|
|
+ phydev->addr, phydev->drv->name);
|
|
+
|
|
+ priv->phydev = phydev;
|
|
} else {
|
|
|
|
/* run platform code to initialize PHY device */
|
|
@@ -1795,6 +1788,9 @@ static int __devinit bcm_enet_probe(stru
|
|
return 0;
|
|
|
|
out_unregister_mdio:
|
|
+ if (priv->phydev)
|
|
+ phy_disconnect(priv->phydev);
|
|
+
|
|
if (priv->mii_bus) {
|
|
mdiobus_unregister(priv->mii_bus);
|
|
kfree(priv->mii_bus->irq);
|
|
@@ -1845,6 +1841,8 @@ static int __devexit bcm_enet_remove(str
|
|
enet_writel(priv, 0, ENET_MIISC_REG);
|
|
|
|
if (priv->has_phy) {
|
|
+ phy_disconnect(priv->phydev);
|
|
+ priv->phydev = NULL;
|
|
mdiobus_unregister(priv->mii_bus);
|
|
kfree(priv->mii_bus->irq);
|
|
mdiobus_free(priv->mii_bus);
|