openwrt-xburst/target/linux/brcm63xx/patches-3.3/419-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch

From 2982127b8a0127667cb5354e03987cd3baa84b8c Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sat, 12 Nov 2011 12:19:55 +0100
Subject: [PATCH 54/79] SPI: MIPS: BCM63XX: Add HS SPI driver

Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h   |   18 +
 .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |    3 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  |   47 ++
 drivers/spi/Kconfig                                |    7 +
 drivers/spi/Makefile                               |    1 +
 drivers/spi/spi-bcm63xx-hsspi.c                    |  502 ++++++++++++++++++++
 6 files changed, 578 insertions(+)
 create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c

--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -116,6 +116,7 @@ enum bcm63xx_regs_set {
 	RSET_UART1,
 	RSET_GPIO,
 	RSET_SPI,
+	RSET_HSSPI,
 	RSET_UDC0,
 	RSET_OHCI0,
 	RSET_OHCI_PRIV,
@@ -161,6 +162,7 @@ enum bcm63xx_regs_set {
 #define RSET_ENETDMAS_SIZE(chans)	(16 * (chans))
 #define RSET_ENETSW_SIZE		65536
 #define RSET_UART_SIZE			24
+#define RSET_HSSPI_SIZE			2048
 #define RSET_UDC_SIZE			256
 #define RSET_OHCI_SIZE			256
 #define RSET_EHCI_SIZE			256
@@ -184,6 +186,7 @@ enum bcm63xx_regs_set {
 #define BCM_6328_UART1_BASE		(0xb0000120)
 #define BCM_6328_GPIO_BASE		(0xb0000080)
 #define BCM_6328_SPI_BASE		(0xdeadbeef)
+#define BCM_6328_HSSPI_BASE		(0xb0001000)
 #define BCM_6328_UDC0_BASE		(0xdeadbeef)
 #define BCM_6328_USBDMA_BASE		(0xdeadbeef)
 #define BCM_6328_OHCI0_BASE		(0xdeadbeef)
@@ -229,6 +232,7 @@ enum bcm63xx_regs_set {
 #define BCM_6338_UART1_BASE		(0xdeadbeef)
 #define BCM_6338_GPIO_BASE		(0xfffe0400)
 #define BCM_6338_SPI_BASE		(0xfffe0c00)
+#define BCM_6338_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6338_UDC0_BASE		(0xdeadbeef)
 #define BCM_6338_USBDMA_BASE		(0xfffe2400)
 #define BCM_6338_OHCI0_BASE		(0xdeadbeef)
@@ -275,6 +279,7 @@ enum bcm63xx_regs_set {
 #define BCM_6345_UART1_BASE		(0xdeadbeef)
 #define BCM_6345_GPIO_BASE		(0xfffe0400)
 #define BCM_6345_SPI_BASE		(0xdeadbeef)
+#define BCM_6345_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6345_UDC0_BASE		(0xdeadbeef)
 #define BCM_6345_USBDMA_BASE		(0xfffe2800)
 #define BCM_6345_ENET0_BASE		(0xfffe1800)
@@ -320,6 +325,7 @@ enum bcm63xx_regs_set {
 #define BCM_6348_UART1_BASE		(0xdeadbeef)
 #define BCM_6348_GPIO_BASE		(0xfffe0400)
 #define BCM_6348_SPI_BASE		(0xfffe0c00)
+#define BCM_6348_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6348_UDC0_BASE		(0xfffe1000)
 #define BCM_6348_OHCI0_BASE		(0xfffe1b00)
 #define BCM_6348_OHCI_PRIV_BASE		(0xfffe1c00)
@@ -363,6 +369,7 @@ enum bcm63xx_regs_set {
 #define BCM_6358_UART1_BASE		(0xfffe0120)
 #define BCM_6358_GPIO_BASE		(0xfffe0080)
 #define BCM_6358_SPI_BASE		(0xfffe0800)
+#define BCM_6358_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6358_UDC0_BASE		(0xfffe0800)
 #define BCM_6358_OHCI0_BASE		(0xfffe1400)
 #define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
@@ -407,6 +414,7 @@ enum bcm63xx_regs_set {
 #define BCM_6368_UART1_BASE		(0xb0000120)
 #define BCM_6368_GPIO_BASE		(0xb0000080)
 #define BCM_6368_SPI_BASE		(0xb0000800)
+#define BCM_6368_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6368_UDC0_BASE		(0xdeadbeef)
 #define BCM_6368_OHCI0_BASE		(0xb0001600)
 #define BCM_6368_OHCI_PRIV_BASE		(0xdeadbeef)
@@ -456,6 +464,7 @@ extern const unsigned long *bcm63xx_regs
 	__GEN_RSET_BASE(__cpu, UART1)					\
 	__GEN_RSET_BASE(__cpu, GPIO)					\
 	__GEN_RSET_BASE(__cpu, SPI)					\
+	__GEN_RSET_BASE(__cpu, HSSPI)					\
 	__GEN_RSET_BASE(__cpu, UDC0)					\
 	__GEN_RSET_BASE(__cpu, OHCI0)					\
 	__GEN_RSET_BASE(__cpu, OHCI_PRIV)				\
@@ -497,6 +506,7 @@ extern const unsigned long *bcm63xx_regs
 	[RSET_UART1]		= BCM_## __cpu ##_UART1_BASE,		\
 	[RSET_GPIO]		= BCM_## __cpu ##_GPIO_BASE,		\
 	[RSET_SPI]		= BCM_## __cpu ##_SPI_BASE,		\
+	[RSET_HSSPI]		= BCM_## __cpu ##_HSSPI_BASE,		\
 	[RSET_UDC0]		= BCM_## __cpu ##_UDC0_BASE,		\
 	[RSET_OHCI0]		= BCM_## __cpu ##_OHCI0_BASE,		\
 	[RSET_OHCI_PRIV]	= BCM_## __cpu ##_OHCI_PRIV_BASE,	\
@@ -569,6 +579,7 @@ enum bcm63xx_irq {
 	IRQ_ENET0,
 	IRQ_ENET1,
 	IRQ_ENET_PHY,
+	IRQ_HSSPI,
 	IRQ_OHCI0,
 	IRQ_EHCI0,
 	IRQ_ENET0_RXDMA,
@@ -604,6 +615,7 @@ enum bcm63xx_irq {
 #define BCM_6328_ENET0_IRQ		0
 #define BCM_6328_ENET1_IRQ		0
 #define BCM_6328_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6328_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
 #define BCM_6328_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 9)
 #define BCM_6328_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
 #define BCM_6328_PCMCIA_IRQ		0
@@ -642,6 +654,7 @@ enum bcm63xx_irq {
 #define BCM_6338_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6338_ENET1_IRQ		0
 #define BCM_6338_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_HSSPI_IRQ		0
 #define BCM_6338_OHCI0_IRQ		0
 #define BCM_6338_EHCI0_IRQ		0
 #define BCM_6338_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
@@ -673,6 +686,7 @@ enum bcm63xx_irq {
 #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6345_ENET1_IRQ		0
 #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_HSSPI_IRQ		0
 #define BCM_6345_OHCI0_IRQ		0
 #define BCM_6345_EHCI0_IRQ		0
 #define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
@@ -704,6 +718,7 @@ enum bcm63xx_irq {
 #define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
 #define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_HSSPI_IRQ		0
 #define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
 #define BCM_6348_EHCI0_IRQ		0
 #define BCM_6348_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 20)
@@ -735,6 +750,7 @@ enum bcm63xx_irq {
 #define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
 #define BCM_6358_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_HSSPI_IRQ		0
 #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6358_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
 #define BCM_6358_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
@@ -775,6 +791,7 @@ enum bcm63xx_irq {
 #define BCM_6368_ENET0_IRQ		0
 #define BCM_6368_ENET1_IRQ		0
 #define BCM_6368_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 15)
+#define BCM_6368_HSSPI_IRQ		0
 #define BCM_6368_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6368_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 7)
 #define BCM_6368_PCMCIA_IRQ		0
@@ -815,6 +832,7 @@ extern const int *bcm63xx_irqs;
 	[IRQ_ENET0]		= BCM_## __cpu ##_ENET0_IRQ,		\
 	[IRQ_ENET1]		= BCM_## __cpu ##_ENET1_IRQ,		\
 	[IRQ_ENET_PHY]		= BCM_## __cpu ##_ENET_PHY_IRQ,		\
+	[IRQ_HSSPI]		= BCM_## __cpu ##_HSSPI_IRQ,		\
 	[IRQ_OHCI0]		= BCM_## __cpu ##_OHCI0_IRQ,		\
 	[IRQ_EHCI0]		= BCM_## __cpu ##_EHCI0_IRQ,		\
 	[IRQ_ENET0_RXDMA]	= BCM_## __cpu ##_ENET0_RXDMA_IRQ,	\
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
@@ -23,4 +23,7 @@ struct bcm63xx_hsspi_pdata {
 #define HSSPI_OP_WRITE		(2 << HSSPI_OP_CODE_SHIFT)
 #define HSSPI_OP_READ		(3 << HSSPI_OP_CODE_SHIFT)
 
+#define HS_SPI_CLOCK_DEF    40000000
+#define HS_SPI_BUFFER_LEN   512
+
 #endif /* BCM63XX_DEV_HSSPI_H */
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -1276,4 +1276,51 @@
 
 #define PCIE_DEVICE_OFFSET		0x8000
 
+/*************************************************************************
+ * _REG relative to RSET_HSSPI
+ *************************************************************************/
+
+#define HSSPI_GLOBAL_CTRL_REG			0x0
+#define GLOBAL_CTRL_CLK_POLARITY		BIT(17)
+#define GLOBAL_CTRL_CLK_GATE_SSOFF		BIT(16)
+
+#define HSSPI_GLOBAL_EXT_TRIGGER_REG		0x4
+
+#define HSSPI_INT_STATUS_REG			0x8
+#define HSSPI_INT_STATUS_MASKED_REG		0xc
+#define HSSPI_INT_MASK_REG			0x10
+
+#define HSSPI_PING0_CMD_DONE			BIT(0)
+
+#define HSSPI_INT_CLEAR_ALL			0xff001f1f
+
+#define HSSPI_PINGPONG_COMMAND_REG(x)		(0x80 + (x) * 0x40)
+#define PINGPONG_CMD_COMMAND_MASK		0xf
+#define PINGPONG_COMMAND_NOOP			0
+#define PINGPONG_COMMAND_START_NOW		1
+#define PINGPONG_COMMAND_START_TRIGGER		2
+#define PINGPONG_COMMAND_HALT			3
+#define PINGPONG_COMMAND_FLUSH			4
+#define PINGPONG_CMD_PROFILE_SHIFT		8
+#define PINGPONG_CMD_SS_SHIFT			12
+
+#define HSSPI_PINGPONG_STATUS_REG(x)		(0x84 + (x) * 0x40)
+
+#define HSSPI_PROFILE_CLK_CTRL_REG(x)		(0x100 + (x) * 0x20)
+#define CLK_CTRL_ACCUM_RST_ON_LOOP		BIT(15)
+
+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x)	(0x104 + (x) * 0x20)
+#define SIGNAL_CTRL_LATCH_RISING		BIT(12)
+#define SIGNAL_CTRL_LAUNCH_RISING		BIT(13)
+#define SIGNAL_CTRL_ASYNC_INPUT_PATH		BIT(16)
+
+#define HSSPI_PROFILE_MODE_CTRL_REG(x)		(0x108 + (x) * 0x20)
+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT	8
+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT	12
+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT	16
+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT	18
+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT		24
+
+#define HSSPI_FIFO_REG(x)			(0x200 + (x) * 0x200)
+
 #endif /* BCM63XX_REGS_H_ */
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -100,6 +100,13 @@ config SPI_BCM63XX
 	help
           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
 
+config SPI_BCM63XX_HSSPI
+	tristate "Broadcom BCM63XX HS SPI controller driver"
+	depends on BCM63XX
+	help
+	  This enables support for the High Speed SPI controller present on
+	  newer Broadcom BCM63XX SoCs.
+
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"
 	help
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
+obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BFIN)			+= spi-bfin5xx.o
 obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
--- /dev/null
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -0,0 +1,502 @@
+/*
+ * Broadcom BCM63XX High Speed SPI Controller driver
+ *
+ * Copyright 2000-2010 Broadcom Corporation
+ * Copyright 2011 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_hsspi.h>
+
+
+#define PFX		KBUILD_MODNAME
+
+struct bcm63xx_hsspi {
+	spinlock_t		lock;
+	int			irq;
+	u8			stopping;
+
+	struct list_head	queue;
+	struct workqueue_struct	*workqueue;
+	struct work_struct	ws;
+	struct completion	done;
+
+	struct spi_transfer	*curr_trans;
+
+	struct platform_device  *pdev;
+	void __iomem		*regs;
+	struct clk		*clk;
+
+	/* Platform data */
+	u32			speed_hz;
+
+	/* data iomem */
+	u8 __iomem		*fifo;
+
+
+};
+
+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
+				  int profile)
+{
+	int clock;
+
+	clock = bs->speed_hz / hz;
+	if (bs->speed_hz % HS_SPI_CLOCK_DEF)
+		clock++;
+
+	clock = 2048 / clock;
+	if (2048 % clock)
+		clock++;
+
+	bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | clock,
+			 HSSPI_PROFILE_CLK_CTRL_REG(profile));
+}
+
+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
+				 struct spi_transfer *t1,
+				 struct spi_transfer *t2)
+{
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
+	u8 chip_select = spi->chip_select;
+	u16 opcode = 0;
+	int prepend_size = 0;
+
+	init_completion(&bs->done);
+	bs->curr_trans = t2 ? t2 : t1;
+	bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
+
+	BUG_ON(t2 && !t1->tx_buf && t1->rx_buf && t2->tx_buf && !t2->rx_buf);
+
+	if (t2 && !t2->tx_buf)
+		prepend_size = t1->len;
+
+	bcm_hsspi_writel(prepend_size<<MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
+			 2<<MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
+			 2<<MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
+			 HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
+
+	if (t1->rx_buf && t1->tx_buf)
+		opcode = HSSPI_OP_READ_WRITE;
+	else if (t1->rx_buf || (t2 && t2->rx_buf))
+		opcode = HSSPI_OP_READ;
+	else if (t1->tx_buf)
+		opcode = HSSPI_OP_WRITE;
+
+	BUG_ON(opcode == 0);
+
+	if (opcode == HSSPI_OP_READ && t2)
+		opcode |= t2->len;
+	else
+		opcode |= t1->len;
+
+	if (t1->tx_buf) {
+		memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
+		if (t2 && t2->tx_buf) {
+			memcpy_toio(bs->fifo + 2 + t1->len,
+				    t2->tx_buf, t2->len);
+			opcode += t2->len;
+		}
+	}
+
+	memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
+
+	/* enable interrupt */
+	bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
+
+	/* start the transfer */
+	bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
+			 chip_select << PINGPONG_CMD_PROFILE_SHIFT |
+			 PINGPONG_COMMAND_START_NOW,
+			 HSSPI_PINGPONG_COMMAND_REG(0));
+
+	wait_for_completion(&bs->done);
+	return t1->len + (t2 ? t2->len : 0);
+}
+static int bcm63xx_hsspi_setup(struct spi_device *spi)
+{
+	struct bcm63xx_hsspi *bs;
+	u32 reg;
+	bs = spi_master_get_devdata(spi->master);
+
+	if (bs->stopping)
+		return -ESHUTDOWN;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (spi->bits_per_word != 8)
+		return -EINVAL;
+
+	if (spi->max_speed_hz == 0)
+		return -EINVAL;
+
+	reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+	reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
+
+	if (spi->mode & SPI_CPHA)
+		reg |= SIGNAL_CTRL_LAUNCH_RISING;
+	else
+		reg |= SIGNAL_CTRL_LATCH_RISING;
+
+	bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
+
+	return 0;
+}
+
+
+static int bcm63xx_hsspi_transfer(struct spi_device *spi,
+				  struct spi_message *msg)
+{
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
+	struct spi_transfer *t, *prev = NULL;
+
+	if (unlikely(list_empty(&msg->transfers)))
+		return -EINVAL;
+
+	if (bs->stopping)
+		return -ESHUTDOWN;
+
+	list_for_each_entry(t, &msg->transfers, transfer_list)	{
+		/* check transfer parameters */
+		if (!t->tx_buf && !t->rx_buf)
+			return -EINVAL;
+
+		if (t->speed_hz == 0)
+			t->speed_hz = spi->max_speed_hz;
+
+		if (t->speed_hz > spi->max_speed_hz)
+			return -EINVAL;
+
+		if (t->len > HS_SPI_BUFFER_LEN)
+			return -EINVAL;
+
+		/* reject if we have to combine two tx transfers and their
+		 * combined length is bigger than the buffer
+		 */
+		if (prev && !prev->cs_change && !t->cs_change && prev->tx_buf &&
+		    t->tx_buf && (prev->len + t->len) > HS_SPI_BUFFER_LEN)
+			return -EINVAL;
+
+		prev = t;
+	}
+
+
+	msg->actual_length = 0;
+
+#if 0
+	/* disable interrupts for the SPI controller
+	   using spin_lock_irqsave would disable all interrupts */
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+#endif
+	spin_lock(&bs->lock);
+	list_add_tail(&msg->queue, &bs->queue);
+	queue_work(bs->workqueue, &bs->ws);
+	spin_unlock(&bs->lock);
+
+#if 0
+	bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
+#endif
+	return 0;
+}
+
+static void bcm63xx_hsspi_do_work(struct work_struct *work)
+{
+	struct bcm63xx_hsspi *bs = container_of(work, struct bcm63xx_hsspi,
+						ws);
+	struct spi_message *msg;
+	struct spi_transfer *prev = NULL;
+	struct spi_transfer *t;
+	u32 reg;
+
+	int len = 0;
+
+	spin_lock(&bs->lock);
+	msg = list_entry(bs->queue.next, struct spi_message, queue);
+	list_del(&msg->queue);
+	spin_unlock(&bs->lock);
+
+	if (bs->stopping) {
+		msg->status = -ESHUTDOWN;
+		goto out;
+	}
+
+	/* setup clock polarity */
+	reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
+	reg &= ~GLOBAL_CTRL_CLK_POLARITY;
+
+	if (msg->spi->mode & SPI_CPOL)
+		reg |= GLOBAL_CTRL_CLK_POLARITY;
+
+	bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		/*
+		 * This controller does not support keeping the chip select
+		 * active between transfers.
+		 * This logic currently supports combining:
+		 *  write then read with no cs_change (e.g. m25p80 RDSR)
+		 *  write then write with no cs_change (e.g. m25p80 PP)
+		 */
+		if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
+			/* combine write with following transfer */
+			len += bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
+			prev = NULL;
+			continue;
+		}
+
+		/* write the previous pending transfer */
+		if (prev != NULL)
+			len += bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+
+		prev = t;
+	}
+
+	/* do last pending transfer */
+	if (prev != NULL)
+		len += bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
+
+	msg->status = 0;
+	msg->actual_length = len;
+out:
+	msg->complete(msg->context);
+}
+
+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
+{
+	struct spi_master *master = (struct spi_master *)dev_id;
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+
+	if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
+		return IRQ_NONE;
+
+	bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+	spin_lock(&bs->lock);
+
+	if (bs->curr_trans && bs->curr_trans->rx_buf)
+		memcpy_fromio(bs->curr_trans->rx_buf,  bs->fifo,
+			      bs->curr_trans->len);
+
+	complete(&bs->done);
+	spin_unlock(&bs->lock);
+
+	return IRQ_HANDLED;
+}
+
+
+static void bcm63xx_hsspi_cleanup(struct spi_device *spi)
+{
+	/* would free spi_controller memory here if any was allocated */
+}
+
+static int __devinit bcm63xx_hsspi_probe(struct platform_device *pdev)
+{
+
+	struct spi_master *master;
+	struct bcm63xx_hsspi *bs;
+	struct resource *res_mem;
+	struct device *dev = &pdev->dev;
+	struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(dev, "no iomem\n");
+		return -ENXIO;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq\n");
+		return -ENXIO;
+	}
+
+	clk = clk_get(dev, "hsspi");
+
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_release;
+	}
+	clk_enable(clk);
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+	if (!master) {
+		ret = -ENOMEM;
+		goto out_disable_clk;
+	}
+
+	bs = spi_master_get_devdata(master);
+	init_completion(&bs->done);
+	bs->pdev = pdev;
+	bs->clk = clk;
+
+	bs->regs = devm_request_and_ioremap(dev, res_mem);
+	if (!bs->regs) {
+		dev_err(dev, "unable to ioremap regs\n");
+		ret = -ENOMEM;
+		goto out_put_master;
+	}
+
+	master->bus_num        = pdata->bus_num;
+	master->num_chipselect = 8;
+	master->setup          = bcm63xx_hsspi_setup;
+	master->transfer       = bcm63xx_hsspi_transfer;
+	master->cleanup        = bcm63xx_hsspi_cleanup;
+	master->mode_bits      = SPI_CPOL | SPI_CPHA;
+
+	bs->speed_hz = pdata->speed_hz;
+	bs->fifo = (u8 *)(bs->regs + HSSPI_FIFO_REG(0));
+
+	platform_set_drvdata(pdev, master);
+
+	spin_lock_init(&bs->lock);
+	INIT_LIST_HEAD(&bs->queue);
+	INIT_WORK(&bs->ws, bcm63xx_hsspi_do_work);
+	bs->workqueue = create_singlethread_workqueue(pdev->name);
+	bs->curr_trans = NULL;
+
+	/* Initialize the hardware */
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+	bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
+			 GLOBAL_CTRL_CLK_GATE_SSOFF,
+			 HSSPI_GLOBAL_CTRL_REG);
+
+	ret = request_irq(irq, bcm63xx_hsspi_interrupt, IRQF_SHARED, pdev->name,
+			  master);
+
+	if (ret)
+		goto out_destroy_workqueue;
+
+	spin_lock(&bs->lock);
+	bs->irq = irq;
+	spin_unlock(&bs->lock);
+
+	/* register and we are done */
+	ret = spi_register_master(master);
+	if (ret)
+		goto out_free_irq;
+
+	return 0;
+
+out_free_irq:
+	free_irq(bs->irq, master);
+out_destroy_workqueue:
+	flush_workqueue(bs->workqueue);
+	destroy_workqueue(bs->workqueue);
+	iounmap(bs->regs);
+out_put_master:
+	spi_master_put(master);
+out_disable_clk:
+	clk_disable(clk);
+	clk_put(clk);
+out_release:
+	release_mem_region(res_mem->start, resource_size(res_mem));
+
+	return ret;
+}
+
+
+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
+	struct spi_message *msg;
+
+	cancel_work_sync(&bs->ws);
+
+	/* reset the hardware and block queue progress */
+	bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
+
+	spin_lock(&bs->lock);
+	/* HW shutdown */
+	bs->stopping = 1;
+	spin_unlock(&bs->lock);
+
+
+	/* Terminate remaining queued transfers */
+	list_for_each_entry(msg, &bs->queue, queue) {
+		msg->status = -ESHUTDOWN;
+		msg->complete(msg->context);
+	}
+
+
+	free_irq(bs->irq, master);
+	flush_workqueue(bs->workqueue);
+	destroy_workqueue(bs->workqueue);
+
+	clk_disable(bs->clk);
+	clk_put(bs->clk);
+
+	spi_unregister_master(master);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
+				 pm_message_t mesg)
+{
+	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi	*bs = spi_master_get_devdata(master);
+
+	clk_disable(bs->clk);
+
+	return 0;
+}
+
+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
+{
+	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct bcm63xx_hsspi	*bs = spi_master_get_devdata(master);
+
+	clk_enable(bs->clk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
+	.suspend	= bcm63xx_hsspi_suspend,
+	.resume		= bcm63xx_hsspi_resume,
+};
+
+#define BCM63XX_HSSPI_PM_OPS	(&bcm63xx_hsspi_pm_ops)
+#else
+#define BCM63XX_HSSPI_PM_OPS	NULL
+#endif
+
+
+
+static struct platform_driver bcm63xx_hsspi_driver = {
+	.driver = {
+		.name	= "bcm63xx-hsspi",
+		.owner	= THIS_MODULE,
+		.pm	= BCM63XX_HSSPI_PM_OPS,
+	},
+	.probe		= bcm63xx_hsspi_probe,
+	.remove		= __exit_p(bcm63xx_hsspi_remove),
+};
+
+module_platform_driver(bcm63xx_hsspi_driver);
+
+MODULE_ALIAS("platform:bcm63xx_hsspi");
+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
+MODULE_LICENSE("GPL");