1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-06 02:01:53 +02:00
openwrt-xburst/target/linux/ramips/base-files/etc/uci-defaults/network
juhosg 6f559fde75 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17 17:56:07 +00:00

188 lines
3.5 KiB
Bash
Executable File

#!/bin/sh
. /etc/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
if [ ! -x /usr/sbin/maccalc ]; then
echo "$0: maccalc not found!"
return
fi
ramips_setup_interfaces()
{
local board="$1"
ucidef_set_interface_loopback
case $board in
all0256n | \
all5002 | \
dir-615-h1 | \
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;
3g-6200n | \
argus-atp52b | \
b2c | \
nw718 | \
psr-680w | \
sl-r7205 | \
w502u | \
wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
f5d8235-v1 | \
f5d8235-v2 | \
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
rt-n15 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "switch0" "2" "4 5t"
;;
rt-n56u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
freestation5 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;
wli-tx4-ag300n)
ucidef_set_interface_lan "eth0"
;;
*)
RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
if [ -n "${RT3X5X}" ]; then
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
else
ucidef_set_interfaces_lan_wan "eth0" "eth1"
fi
;;
esac
}
ramips_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
all0256n | \
all5002 | \
dir-615-h1)
lan_mac=$(ramips_get_mac_binary factory 40)
;;
3g-6200n | \
argus-atp52b | \
bc2 | \
f5d8235-v1 | \
nw718 | \
psr-680w | \
rt-n15 | \
sl-r7205 | \
wl-351)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
w306r-v20)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
;;
fonera20n)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
dir-620-a1)
lan_mac=$(ramips_get_mac_binary factory 4)
lan_mac=$(maccalc or "$lan_mac" "02:00:00:00:00:00")
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
esr-9753 | \
ur-336un)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
nbg-419n | \
wcr-150gn)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 40)
;;
f5d8235-v2)
lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
rt-n56u)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 32772)
;;
all0239-3g | \
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)
;;
wl341v3)
lan_mac=$(ramips_get_mac_binary board-nvram 65440)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
wli-tx4-ag300n)
lan_mac=$(ramips_get_mac_binary factory 4)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
board=$(ramips_board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
uci commit network
exit 0