qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 14:36:14 +02:00
Code
70b0829237
openwrt-xburst/target/linux/octeon/patches-2.6.30/006-octeon_mgmt_driver.patch
florian e575c1b6f3 [octeon] move generic config and patches directory to be 2.6.30 specific 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-04 10:10:45 +00:00

2023 lines
56 KiB
Diff
Raw Blame History

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
arch/mips/include/asm/octeon/cvmx-mdio.h | 577 +++++++++++++++++++++
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1 +
drivers/net/octeon/Makefile | 11 +
drivers/net/octeon/cvmx-mgmt-port.c | 818 ++++++++++++++++++++++++++++++
drivers/net/octeon/cvmx-mgmt-port.h | 168 ++++++
drivers/net/octeon/octeon-mgmt-port.c | 389 ++++++++++++++
7 files changed, 1972 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/octeon/cvmx-mdio.h
create mode 100644 drivers/net/octeon/Makefile
create mode 100644 drivers/net/octeon/cvmx-mgmt-port.c
create mode 100644 drivers/net/octeon/cvmx-mgmt-port.h
create mode 100644 drivers/net/octeon/octeon-mgmt-port.c
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h
@@ -0,0 +1,577 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ *
+ * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3
+ * clause 22 and clause 45 operations.
+ *
+ */
+
+#ifndef __CVMX_MIO_H__
+#define __CVMX_MIO_H__
+
+#include "cvmx-smix-defs.h"
+
+/**
+ * PHY register 0 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_CONTROL 0
+union cvmx_mdio_phy_reg_control {
+ uint16_t u16;
+ struct {
+ uint16_t reset:1;
+ uint16_t loopback:1;
+ uint16_t speed_lsb:1;
+ uint16_t autoneg_enable:1;
+ uint16_t power_down:1;
+ uint16_t isolate:1;
+ uint16_t restart_autoneg:1;
+ uint16_t duplex:1;
+ uint16_t collision_test:1;
+ uint16_t speed_msb:1;
+ uint16_t unidirectional_enable:1;
+ uint16_t reserved_0_4:5;
+ } s;
+};
+
+/**
+ * PHY register 1 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_STATUS 1
+union cvmx_mdio_phy_reg_status {
+ uint16_t u16;
+ struct {
+ uint16_t capable_100base_t4:1;
+ uint16_t capable_100base_x_full:1;
+ uint16_t capable_100base_x_half:1;
+ uint16_t capable_10_full:1;
+ uint16_t capable_10_half:1;
+ uint16_t capable_100base_t2_full:1;
+ uint16_t capable_100base_t2_half:1;
+ uint16_t capable_extended_status:1;
+ uint16_t capable_unidirectional:1;
+ uint16_t capable_mf_preamble_suppression:1;
+ uint16_t autoneg_complete:1;
+ uint16_t remote_fault:1;
+ uint16_t capable_autoneg:1;
+ uint16_t link_status:1;
+ uint16_t jabber_detect:1;
+ uint16_t capable_extended_registers:1;
+
+ } s;
+};
+
+/**
+ * PHY register 2 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_ID1 2
+union cvmx_mdio_phy_reg_id1 {
+ uint16_t u16;
+ struct {
+ uint16_t oui_bits_3_18;
+ } s;
+};
+
+/**
+ * PHY register 3 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_ID2 3
+union cvmx_mdio_phy_reg_id2 {
+ uint16_t u16;
+ struct {
+ uint16_t oui_bits_19_24:6;
+ uint16_t model:6;
+ uint16_t revision:4;
+ } s;
+};
+
+/**
+ * PHY register 4 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4
+union cvmx_mdio_phy_reg_autoneg_adver {
+ uint16_t u16;
+ struct {
+ uint16_t next_page:1;
+ uint16_t reserved_14:1;
+ uint16_t remote_fault:1;
+ uint16_t reserved_12:1;
+ uint16_t asymmetric_pause:1;
+ uint16_t pause:1;
+ uint16_t advert_100base_t4:1;
+ uint16_t advert_100base_tx_full:1;
+ uint16_t advert_100base_tx_half:1;
+ uint16_t advert_10base_tx_full:1;
+ uint16_t advert_10base_tx_half:1;
+ uint16_t selector:5;
+ } s;
+};
+
+/**
+ * PHY register 5 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5
+union cvmx_mdio_phy_reg_link_partner_ability {
+ uint16_t u16;
+ struct {
+ uint16_t next_page:1;
+ uint16_t ack:1;
+ uint16_t remote_fault:1;
+ uint16_t reserved_12:1;
+ uint16_t asymmetric_pause:1;
+ uint16_t pause:1;
+ uint16_t advert_100base_t4:1;
+ uint16_t advert_100base_tx_full:1;
+ uint16_t advert_100base_tx_half:1;
+ uint16_t advert_10base_tx_full:1;
+ uint16_t advert_10base_tx_half:1;
+ uint16_t selector:5;
+ } s;
+};
+
+/**
+ * PHY register 6 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6
+union cvmx_mdio_phy_reg_autoneg_expansion {
+ uint16_t u16;
+ struct {
+ uint16_t reserved_5_15:11;
+ uint16_t parallel_detection_fault:1;
+ uint16_t link_partner_next_page_capable:1;
+ uint16_t local_next_page_capable:1;
+ uint16_t page_received:1;
+ uint16_t link_partner_autoneg_capable:1;
+
+ } s;
+};
+
+/**
+ * PHY register 9 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_CONTROL_1000 9
+union cvmx_mdio_phy_reg_control_1000 {
+ uint16_t u16;
+ struct {
+ uint16_t test_mode:3;
+ uint16_t manual_master_slave:1;
+ uint16_t master:1;
+ uint16_t port_type:1;
+ uint16_t advert_1000base_t_full:1;
+ uint16_t advert_1000base_t_half:1;
+ uint16_t reserved_0_7:8;
+ } s;
+};
+
+/**
+ * PHY register 10 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_STATUS_1000 10
+union cvmx_mdio_phy_reg_status_1000 {
+ uint16_t u16;
+ struct {
+ uint16_t master_slave_fault:1;
+ uint16_t is_master:1;
+ uint16_t local_receiver_ok:1;
+ uint16_t remote_receiver_ok:1;
+ uint16_t remote_capable_1000base_t_full:1;
+ uint16_t remote_capable_1000base_t_half:1;
+ uint16_t reserved_8_9:2;
+ uint16_t idle_error_count:8;
+ } s;
+};
+
+/**
+ * PHY register 15 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15
+union cvmx_mdio_phy_reg_extended_status {
+ uint16_t u16;
+ struct {
+ uint16_t capable_1000base_x_full:1;
+ uint16_t capable_1000base_x_half:1;
+ uint16_t capable_1000base_t_full:1;
+ uint16_t capable_1000base_t_half:1;
+ uint16_t reserved_0_11:12;
+ } s;
+};
+
+/**
+ * PHY register 13 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13
+union cvmx_mdio_phy_reg_mmd_control {
+ uint16_t u16;
+ struct {
+ uint16_t function:2;
+ uint16_t reserved_5_13:9;
+ uint16_t devad:5;
+ } s;
+};
+
+/**
+ * PHY register 14 from the 802.3 spec
+ */
+#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14
+union cvmx_mdio_phy_reg_mmd_address_data {
+ uint16_t u16;
+ struct {
+ uint16_t address_data:16;
+ } s;
+};
+
+/* Operating request encodings. */
+#define MDIO_CLAUSE_22_WRITE 0
+#define MDIO_CLAUSE_22_READ 1
+
+#define MDIO_CLAUSE_45_ADDRESS 0
+#define MDIO_CLAUSE_45_WRITE 1
+#define MDIO_CLAUSE_45_READ_INC 2
+#define MDIO_CLAUSE_45_READ 3
+
+/* MMD identifiers, mostly for accessing devices withing XENPAK modules. */
+#define CVMX_MMD_DEVICE_PMA_PMD 1
+#define CVMX_MMD_DEVICE_WIS 2
+#define CVMX_MMD_DEVICE_PCS 3
+#define CVMX_MMD_DEVICE_PHY_XS 4
+#define CVMX_MMD_DEVICE_DTS_XS 5
+#define CVMX_MMD_DEVICE_TC 6
+#define CVMX_MMD_DEVICE_CL22_EXT 29
+#define CVMX_MMD_DEVICE_VENDOR_1 30
+#define CVMX_MMD_DEVICE_VENDOR_2 31
+
+/**
+ * Perform an MII read. This function is used to read PHY
+ * registers controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @location: Register location to read
+ *
+ * Returns Result from the read or -1 on failure
+ */
+static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_rd_dat smi_rd;
+ int timeout = 1000;
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = location;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
+ } while (smi_rd.s.pending && timeout--);
+
+ if (smi_rd.s.val)
+ return smi_rd.s.dat;
+ else
+ return -1;
+}
+
+/**
+ * Perform an MII write. This function is used to write PHY
+ * registers controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @location: Register location to write
+ * @val: Value to write
+ *
+ * Returns -1 on error
+ * 0 on success
+ */
+static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = val;
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = location;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
+ } while (smi_wr.s.pending && --timeout);
+ if (timeout <= 0)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Perform an IEEE 802.3 clause 45 MII read using clause 22 operations. This
+ * function is used to read PHY registers controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @device: MDIO Managable Device (MMD) id
+ * @location: Register location to read
+ *
+ * Returns Result from the read or -1 on failure
+ */
+
+static inline int cvmx_mdio_45_via_22_read(int bus_id, int phy_id, int device,
+ int location)
+{
+ union cvmx_mdio_phy_reg_mmd_control mmd_control;
+
+ /*
+ * a) To Register 13, write the Function field to 00 (address)
+ * and DEVAD field to the device address value for the
+ * desired MMD;
+ */
+ mmd_control.u16 = 0;
+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS;
+ mmd_control.s.devad = device;
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
+ mmd_control.u16);
+
+ /*
+ * b) To Register 14, write the desired address value to the
+ * MMD's address register;
+ */
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA,
+ location);
+
+ /*
+ * c) To Register 13, write the Function field to 01 (Data, no
+ * post increment) and DEVAD field to the same device
+ * address value for the desired MMD;
+ */
+ mmd_control.u16 = 0;
+ mmd_control.s.function = MDIO_CLAUSE_45_READ;
+ mmd_control.s.devad = device;
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
+ mmd_control.u16);
+
+ /*
+ * d) From Register 14, read the content of the MMD's selected
+ * register.
+ */
+ return cvmx_mdio_read(bus_id, phy_id,
+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA);
+}
+
+/**
+ * Perform an IEEE 802.3 clause 45 MII write using clause 22
+ * operations. This function is used to write PHY registers
+ * controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @device: MDIO Managable Device (MMD) id
+ * @location: Register location to write
+ * @val: Value to write
+ *
+ * Returns -1 on error
+ * 0 on success
+ */
+static inline int cvmx_mdio_45_via_22_write(int bus_id, int phy_id, int device,
+ int location, int val)
+{
+ union cvmx_mdio_phy_reg_mmd_control mmd_control;
+
+ /*
+ * a) To Register 13, write the Function field to 00 (address)
+ * and DEVAD field to the device address value for the
+ * desired MMD;
+ */
+ mmd_control.u16 = 0;
+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS;
+ mmd_control.s.devad = device;
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
+ mmd_control.u16);
+
+ /*
+ * b) To Register 14, write the desired address value to the
+ * MMD's address register;
+ */
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA,
+ location);
+
+ /*
+ * c) To Register 13, write the Function field to 01 (Data, no
+ * post increment) and DEVAD field to the same device
+ * address value for the desired MMD;
+ */
+ mmd_control.u16 = 0;
+ mmd_control.s.function = MDIO_CLAUSE_45_READ;
+ mmd_control.s.devad = device;
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
+ mmd_control.u16);
+
+ /*
+ * d) To Register 14, write the content of the MMD's selected
+ * register.
+ */
+ return cvmx_mdio_write(bus_id, phy_id,
+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA, val);
+
+ return 0;
+}
+
+/**
+ * Perform an IEEE 802.3 clause 45 MII read. This function is used to read PHY
+ * registers controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @device: MDIO Managable Device (MMD) id
+ * @location: Register location to read
+ *
+ * Returns Result from the read or -1 on failure
+ */
+
+static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
+ int location)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_rd_dat smi_rd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = location;
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = device;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
+ } while (smi_wr.s.pending && --timeout);
+ if (timeout <= 0)
+ return -1;
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = device;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
+ } while (smi_rd.s.pending && timeout--);
+
+ if (0 == timeout)
+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
+ "device %2d register %2d TIME OUT\n",
+ bus_id, phy_id, device, location);
+
+ if (smi_rd.s.val)
+ return smi_rd.s.dat;
+ else {
+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
+ "device %2d register %2d INVALID READ\n",
+ bus_id, phy_id, device, location);
+ return -1;
+ }
+}
+
+/**
+ * Perform an IEEE 802.3 clause 45 MII write. This function is used to
+ * write PHY registers controlling auto negotiation.
+ *
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
+ * support multiple busses.
+ * @phy_id: The MII phy id
+ * @device: MDIO Managable Device (MMD) id
+ * @location: Register location to write
+ * @val: Value to write
+ *
+ * Returns -1 on error
+ * 0 on success
+ */
+static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
+ int location, int val)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = location;
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = device;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
+ } while (smi_wr.s.pending && --timeout);
+ if (timeout <= 0)
+ return -1;
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = val;
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = device;
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
+
+ do {
+ cvmx_wait(1000);
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
+ } while (smi_wr.s.pending && --timeout);
+ if (timeout <= 0)
+ return -1;
+
+ return 0;
+}
+
+#endif
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2035,6 +2035,14 @@ config ATL2
To compile this driver as a module, choose M here. The module
will be called atl2.
+config OCTEON_MGMT
+ tristate "OCTEON Management port ethernet driver (CN5XXX)"
+ depends on CPU_CAVIUM_OCTEON
+ default y
+ help
+ This option enables the ethernet driver for the management port on
+ CN52XX, CN57XX, CN56XX, CN55XX, and CN54XX chips.
+
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -234,6 +234,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
+obj-$(CONFIG_OCTEON_MGMT) += octeon/
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
--- /dev/null
+++ b/drivers/net/octeon/Makefile
@@ -0,0 +1,11 @@
+# Makefile for the Cavium OCTEON Ethernet drivers.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Cavium Networks
+
+obj-$(CONFIG_OCTEON_MGMT) += octeon_mgmt.o
+
+octeon_mgmt-objs := octeon-mgmt-port.o cvmx-mgmt-port.o
\ No newline at end of file
--- /dev/null
+++ b/drivers/net/octeon/cvmx-mgmt-port.c
@@ -0,0 +1,818 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ *
+ * Support functions for managing the MII management port
+ *
+ */
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-spinlock.h>
+#include <asm/octeon/cvmx-bootmem.h>
+#include <asm/octeon/cvmx-mdio.h>
+
+#include <asm/octeon/cvmx-mixx-defs.h>
+#include <asm/octeon/cvmx-agl-defs.h>
+
+#include "cvmx-mgmt-port.h"
+
+#define CVMX_MGMT_PORT_NUM_PORTS 2
+/* Number of TX ring buffer entries and buffers */
+#define CVMX_MGMT_PORT_NUM_TX_BUFFERS 16
+/* Number of RX ring buffer entries and buffers */
+#define CVMX_MGMT_PORT_NUM_RX_BUFFERS 128
+
+#define CVMX_MGMT_PORT_TX_BUFFER_SIZE 12288
+#define CVMX_MGMT_PORT_RX_BUFFER_SIZE 1536
+
+/**
+ * Format of the TX/RX ring buffer entries
+ */
+union cvmx_mgmt_port_ring_entry {
+ uint64_t u64;
+ struct {
+ uint64_t reserved_62_63:2;
+ /* Length of the buffer/packet in bytes */
+ uint64_t len:14;
+ /* The RX error code */
+ uint64_t code:8;
+ /* Physical address of the buffer */
+ uint64_t addr:40;
+ } s;
+};
+
+/**
+ * Per port state required for each mgmt port
+ */
+struct cvmx_mgmt_port_state {
+ /* Used for exclusive access to this structure */
+ cvmx_spinlock_t lock;
+ /* Where the next TX will write in the tx_ring and tx_buffers */
+ int tx_write_index;
+ /* Where the next RX will be in the rx_ring and rx_buffers */
+ int rx_read_index;
+ /* The SMI/MDIO PHY address */
+ int phy_id;
+ /* Our MAC address */
+ uint64_t mac;
+ union cvmx_mgmt_port_ring_entry tx_ring[CVMX_MGMT_PORT_NUM_TX_BUFFERS];
+ union cvmx_mgmt_port_ring_entry rx_ring[CVMX_MGMT_PORT_NUM_RX_BUFFERS];
+ char tx_buffers[CVMX_MGMT_PORT_NUM_TX_BUFFERS]
+ [CVMX_MGMT_PORT_TX_BUFFER_SIZE];
+ char rx_buffers[CVMX_MGMT_PORT_NUM_RX_BUFFERS]
+ [CVMX_MGMT_PORT_RX_BUFFER_SIZE];
+};
+
+/**
+ * Pointers to each mgmt port's state
+ */
+struct cvmx_mgmt_port_state *cvmx_mgmt_port_state_ptr;
+
+/**
+ * Return the number of management ports supported by this chip
+ *
+ * Returns Number of ports
+ */
+int __cvmx_mgmt_port_num_ports(void)
+{
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+ return 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ return 2;
+ else
+ return 0;
+}
+
+/**
+ * Called to initialize a management port for use. Multiple calls
+ * to this function accross applications is safe.
+ *
+ * @port: Port to initialize
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port)
+{
+ char *alloc_name = "cvmx_mgmt_port";
+ union cvmx_mixx_oring1 oring1;
+ union cvmx_mixx_ctl mix_ctl;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ cvmx_mgmt_port_state_ptr =
+ cvmx_bootmem_alloc_named(CVMX_MGMT_PORT_NUM_PORTS *
+ sizeof(struct cvmx_mgmt_port_state), 128,
+ alloc_name);
+ if (cvmx_mgmt_port_state_ptr) {
+ memset(cvmx_mgmt_port_state_ptr, 0,
+ CVMX_MGMT_PORT_NUM_PORTS *
+ sizeof(struct cvmx_mgmt_port_state));
+ } else {
+ struct cvmx_bootmem_named_block_desc *block_desc =
+ cvmx_bootmem_find_named_block(alloc_name);
+ if (block_desc)
+ cvmx_mgmt_port_state_ptr =
+ cvmx_phys_to_ptr(block_desc->base_addr);
+ else {
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_initialize: "
+ "Unable to get named block %s.\n",
+ alloc_name);
+ return CVMX_MGMT_PORT_NO_MEMORY;
+ }
+ }
+
+ /*
+ * Reset the MIX block if the previous user had a different TX
+ * ring size.
+ */
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
+ if (!mix_ctl.s.reset) {
+ oring1.u64 = cvmx_read_csr(CVMX_MIXX_ORING1(port));
+ if (oring1.s.osize != CVMX_MGMT_PORT_NUM_TX_BUFFERS) {
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
+ mix_ctl.s.en = 0;
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+ do {
+ mix_ctl.u64 =
+ cvmx_read_csr(CVMX_MIXX_CTL(port));
+ } while (mix_ctl.s.busy);
+ mix_ctl.s.reset = 1;
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+ cvmx_read_csr(CVMX_MIXX_CTL(port));
+ memset(cvmx_mgmt_port_state_ptr + port, 0,
+ sizeof(struct cvmx_mgmt_port_state));
+ }
+ }
+
+ if (cvmx_mgmt_port_state_ptr[port].tx_ring[0].u64 == 0) {
+ struct cvmx_mgmt_port_state *state =
+ cvmx_mgmt_port_state_ptr + port;
+ int i;
+ union cvmx_mixx_bist mix_bist;
+ union cvmx_agl_gmx_bist agl_gmx_bist;
+ union cvmx_mixx_oring1 oring1;
+ union cvmx_mixx_iring1 iring1;
+ union cvmx_mixx_ctl mix_ctl;
+
+ /* Make sure BIST passed */
+ mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(port));
+ if (mix_bist.u64)
+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: "
+ "Managment port MIX failed BIST "
+ "(0x%016llx)\n",
+ (unsigned long long)mix_bist.u64);
+
+ agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST);
+ if (agl_gmx_bist.u64)
+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: "
+ "Managment port AGL failed BIST "
+ "(0x%016llx)\n",
+ (unsigned long long)agl_gmx_bist.u64);
+
+ /* Clear all state information */
+ memset(state, 0, sizeof(*state));
+
+ /* Take the control logic out of reset */
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
+ mix_ctl.s.reset = 0;
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+
+ /* Set the PHY address */
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
+ state->phy_id = -1;
+ else
+ /* Will need to be change to match the board */
+ state->phy_id = port;
+
+ /* Create a default MAC address */
+ state->mac = 0x000000dead000000ull;
+ state->mac += 0xffffff & CAST64(state);
+
+ /* Setup the TX ring */
+ for (i = 0; i < CVMX_MGMT_PORT_NUM_TX_BUFFERS; i++) {
+ state->tx_ring[i].s.len = CVMX_MGMT_PORT_TX_BUFFER_SIZE;
+ state->tx_ring[i].s.addr =
+ cvmx_ptr_to_phys(state->tx_buffers[i]);
+ }
+
+ /* Tell the HW where the TX ring is */
+ oring1.u64 = 0;
+ oring1.s.obase = cvmx_ptr_to_phys(state->tx_ring) >> 3;
+ oring1.s.osize = CVMX_MGMT_PORT_NUM_TX_BUFFERS;
+ CVMX_SYNCWS;
+ cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64);
+
+ /* Setup the RX ring */
+ for (i = 0; i < CVMX_MGMT_PORT_NUM_RX_BUFFERS; i++) {
+ /* This size is -8 due to an errata for CN56XX pass 1 */
+ state->rx_ring[i].s.len =
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
+ state->rx_ring[i].s.addr =
+ cvmx_ptr_to_phys(state->rx_buffers[i]);
+ }
+
+ /* Tell the HW where the RX ring is */
+ iring1.u64 = 0;
+ iring1.s.ibase = cvmx_ptr_to_phys(state->rx_ring) >> 3;
+ iring1.s.isize = CVMX_MGMT_PORT_NUM_RX_BUFFERS;
+ CVMX_SYNCWS;
+ cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64);
+ cvmx_write_csr(CVMX_MIXX_IRING2(port),
+ CVMX_MGMT_PORT_NUM_RX_BUFFERS);
+
+ /* Disable the external input/output */
+ cvmx_mgmt_port_disable(port);
+
+ /* Set the MAC address filtering up */
+ cvmx_mgmt_port_set_mac(port, state->mac);
+
+ /*
+ * Set the default max size to an MTU of 1500 with L2
+ * and VLAN.
+ */
+ cvmx_mgmt_port_set_max_packet_size(port, 1518);
+
+ /*
+ * Enable the port HW. Packets are not allowed until
+ * cvmx_mgmt_port_enable() is called.
+ */
+ mix_ctl.u64 = 0;
+ /* Strip the ending CRC */
+ mix_ctl.s.crc_strip = 1;
+ /* Enable the port */
+ mix_ctl.s.en = 1;
+ /* Arbitration mode */
+ mix_ctl.s.nbtarb = 0;
+ /* MII CB-request FIFO programmable high watermark */
+ mix_ctl.s.mrq_hwm = 1;
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
+ || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+ /*
+ * Force compensation values, as they are not
+ * determined properly by HW.
+ */
+ union cvmx_agl_gmx_drv_ctl drv_ctl;
+
+ drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL);
+ if (port) {
+ drv_ctl.s.byp_en1 = 1;
+ drv_ctl.s.nctl1 = 6;
+ drv_ctl.s.pctl1 = 6;
+ } else {
+ drv_ctl.s.byp_en = 1;
+ drv_ctl.s.nctl = 6;
+ drv_ctl.s.pctl = 6;
+ }
+ cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64);
+ }
+ }
+ return CVMX_MGMT_PORT_SUCCESS;
+}
+
+/**
+ * Shutdown a management port. This currently disables packet IO
+ * but leaves all hardware and buffers. Another application can then
+ * call initialize() without redoing the hardware setup.
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port)
+{
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ /* Stop packets from comming in */
+ cvmx_mgmt_port_disable(port);
+
+ /*
+ * We don't free any memory so the next intialize can reuse
+ * the HW setup.
+ */
+ return CVMX_MGMT_PORT_SUCCESS;
+}
+
+/**
+ * Enable packet IO on a management port
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port)
+{
+ struct cvmx_mgmt_port_state *state;
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
+ union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode;
+ union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ rxx_frm_ctl.u64 = 0;
+ rxx_frm_ctl.s.pre_align = 1;
+ /*
+ * When set, disables the length check for non-min sized pkts
+ * with padding in the client data.
+ */
+ rxx_frm_ctl.s.pad_len = 1;
+ /* When set, disables the length check for VLAN pkts */
+ rxx_frm_ctl.s.vlan_len = 1;
+ /* When set, PREAMBLE checking is less strict */
+ rxx_frm_ctl.s.pre_free = 1;
+ /* Control Pause Frames can match station SMAC */
+ rxx_frm_ctl.s.ctl_smac = 0;
+ /* Control Pause Frames can match globally assign Multicast address */
+ rxx_frm_ctl.s.ctl_mcst = 1;
+ /* Forward pause information to TX block */
+ rxx_frm_ctl.s.ctl_bck = 1;
+ /* Drop Control Pause Frames */
+ rxx_frm_ctl.s.ctl_drp = 1;
+ /* Strip off the preamble */
+ rxx_frm_ctl.s.pre_strp = 1;
+ /*
+ * This port is configured to send PREAMBLE+SFD to begin every
+ * frame. GMX checks that the PREAMBLE is sent correctly.
+ */
+ rxx_frm_ctl.s.pre_chk = 1;
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64);
+
+ /* Enable the AGL block */
+ agl_gmx_inf_mode.u64 = 0;
+ agl_gmx_inf_mode.s.en = 1;
+ cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64);
+
+ /* Configure the port duplex and enables */
+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+ agl_gmx_prtx.s.tx_en = 1;
+ agl_gmx_prtx.s.rx_en = 1;
+ if (cvmx_mgmt_port_get_link(port) < 0)
+ agl_gmx_prtx.s.duplex = 0;
+ else
+ agl_gmx_prtx.s.duplex = 1;
+ agl_gmx_prtx.s.en = 1;
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ cvmx_spinlock_unlock(&state->lock);
+ return CVMX_MGMT_PORT_SUCCESS;
+}
+
+/**
+ * Disable packet IO on a management port
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port)
+{
+ struct cvmx_mgmt_port_state *state;
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+ agl_gmx_prtx.s.en = 0;
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ cvmx_spinlock_unlock(&state->lock);
+ return CVMX_MGMT_PORT_SUCCESS;
+}
+
+/**
+ * Send a packet out the management port. The packet is copied so
+ * the input buffer isn't used after this call.
+ *
+ * @port: Management port
+ * @packet_len: Length of the packet to send. It does not include the final CRC
+ * @buffer: Packet data
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len,
+ void *buffer)
+{
+ struct cvmx_mgmt_port_state *state;
+ union cvmx_mixx_oring2 mix_oring2;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ /* Max sure the packet size is valid */
+ if ((packet_len < 1) || (packet_len > CVMX_MGMT_PORT_TX_BUFFER_SIZE))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ if (buffer == NULL)
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ mix_oring2.u64 = cvmx_read_csr(CVMX_MIXX_ORING2(port));
+ if (mix_oring2.s.odbell >= CVMX_MGMT_PORT_NUM_TX_BUFFERS - 1) {
+ /* No room for another packet */
+ cvmx_spinlock_unlock(&state->lock);
+ return CVMX_MGMT_PORT_NO_MEMORY;
+ } else {
+ /* Copy the packet into the output buffer */
+ memcpy(state->tx_buffers[state->tx_write_index], buffer,
+ packet_len);
+ /* Insert the source MAC */
+ memcpy(state->tx_buffers[state->tx_write_index] + 6,
+ ((char *)&state->mac) + 2, 6);
+ /* Update the TX ring buffer entry size */
+ state->tx_ring[state->tx_write_index].s.len = packet_len;
+ /* Increment our TX index */
+ state->tx_write_index =
+ (state->tx_write_index + 1) % CVMX_MGMT_PORT_NUM_TX_BUFFERS;
+ /* Ring the doorbell, send ing the packet */
+ CVMX_SYNCWS;
+ cvmx_write_csr(CVMX_MIXX_ORING2(port), 1);
+ if (cvmx_read_csr(CVMX_MIXX_ORCNT(port)))
+ cvmx_write_csr(CVMX_MIXX_ORCNT(port),
+ cvmx_read_csr(CVMX_MIXX_ORCNT(port)));
+
+ cvmx_spinlock_unlock(&state->lock);
+ return CVMX_MGMT_PORT_SUCCESS;
+ }
+}
+
+/**
+ * Receive a packet from the management port.
+ *
+ * @port: Management port
+ * @buffer_len: Size of the buffer to receive the packet into
+ * @buffer: Buffer to receive the packet into
+ *
+ * Returns The size of the packet, or a negative erorr code on failure. Zero
+ * means that no packets were available.
+ */
+int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer)
+{
+ union cvmx_mixx_ircnt mix_ircnt;
+ struct cvmx_mgmt_port_state *state;
+ int result;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ /* Max sure the buffer size is valid */
+ if (buffer_len < 1)
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ if (buffer == NULL)
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ /* Find out how many RX packets are pending */
+ mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port));
+ if (mix_ircnt.s.ircnt) {
+ void *source = state->rx_buffers[state->rx_read_index];
+ uint64_t *zero_check = source;
+ /*
+ * CN56XX pass 1 has an errata where packets might
+ * start 8 bytes into the buffer instead of at their
+ * correct location. If the first 8 bytes is zero we
+ * assume this has happened.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
+ && (*zero_check == 0))
+ source += 8;
+ /* Start off with zero bytes received */
+ result = 0;
+ /*
+ * While the completion code signals more data, copy
+ * the buffers into the user's data.
+ */
+ while (state->rx_ring[state->rx_read_index].s.code == 16) {
+ /* Only copy what will fit in the user's buffer */
+ int length = state->rx_ring[state->rx_read_index].s.len;
+ if (length > buffer_len)
+ length = buffer_len;
+ memcpy(buffer, source, length);
+ /*
+ * Reduce the size of the buffer to the
+ * remaining space. If we run out we will
+ * signal an error when the code 15 buffer
+ * doesn't fit.
+ */
+ buffer += length;
+ buffer_len -= length;
+ result += length;
+ /*
+ * Update this buffer for reuse in future
+ * receives. This size is -8 due to an errata
+ * for CN56XX pass 1.
+ */
+ state->rx_ring[state->rx_read_index].s.code = 0;
+ state->rx_ring[state->rx_read_index].s.len =
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
+ state->rx_read_index =
+ (state->rx_read_index +
+ 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS;
+ /*
+ * Zero the beginning of the buffer for use by
+ * the errata check.
+ */
+ *zero_check = 0;
+ CVMX_SYNCWS;
+ /* Increment the number of RX buffers */
+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1);
+ source = state->rx_buffers[state->rx_read_index];
+ zero_check = source;
+ }
+
+ /* Check for the final good completion code */
+ if (state->rx_ring[state->rx_read_index].s.code == 15) {
+ if (buffer_len >=
+ state->rx_ring[state->rx_read_index].s.len) {
+ int length =
+ state->rx_ring[state->rx_read_index].s.len;
+ memcpy(buffer, source, length);
+ result += length;
+ } else {
+ /* Not enough room for the packet */
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: "
+ "Packet (%d) larger than "
+ "supplied buffer (%d)\n",
+ state->rx_ring[state->rx_read_index].s.len,
+ buffer_len);
+ result = CVMX_MGMT_PORT_NO_MEMORY;
+ }
+ } else {
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: Receive "
+ "error code %d. Packet dropped(Len %d)\n",
+ state->rx_ring[state->rx_read_index].s.code,
+ state->rx_ring[state->rx_read_index].s.len +
+ result);
+ result = -state->rx_ring[state->rx_read_index].s.code;
+
+ /* Check to see if we need to change the duplex. */
+ agl_gmx_prtx.u64 =
+ cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+ if (cvmx_mgmt_port_get_link(port) < 0)
+ agl_gmx_prtx.s.duplex = 0;
+ else
+ agl_gmx_prtx.s.duplex = 1;
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port),
+ agl_gmx_prtx.u64);
+ }
+
+ /*
+ * Clean out the ring buffer entry. This size is -8
+ * due to an errata for CN56XX pass 1.
+ */
+ state->rx_ring[state->rx_read_index].s.code = 0;
+ state->rx_ring[state->rx_read_index].s.len =
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
+ state->rx_read_index =
+ (state->rx_read_index + 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS;
+ /*
+ * Zero the beginning of the buffer for use by the
+ * errata check.
+ */
+ *zero_check = 0;
+ CVMX_SYNCWS;
+ /* Increment the number of RX buffers */
+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1);
+ /* Decrement the pending RX count */
+ cvmx_write_csr(CVMX_MIXX_IRCNT(port), 1);
+ } else {
+ /* No packets available */
+ result = 0;
+ }
+ cvmx_spinlock_unlock(&state->lock);
+ return result;
+}
+
+/**
+ * Get the management port link status:
+ * 100 = 100Mbps, full duplex
+ * 10 = 10Mbps, full duplex
+ * 0 = Link down
+ * -10 = 10Mpbs, half duplex
+ * -100 = 100Mbps, half duplex
+ *
+ * @port: Management port
+ *
+ * Returns
+ */
+int cvmx_mgmt_port_get_link(int port)
+{
+ struct cvmx_mgmt_port_state *state;
+ int phy_status;
+ int duplex;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ /* Assume 100Mbps if we don't know the PHY address */
+ if (state->phy_id == -1)
+ return 100;
+
+ /* Read the PHY state */
+ phy_status =
+ cvmx_mdio_read(state->phy_id >> 8, state->phy_id & 0xff, 17);
+
+ /* Only return a link if the PHY has finished auto negotiation
+ and set the resolved bit (bit 11) */
+ if (!(phy_status & (1 << 11)))
+ return 0;
+
+ /* Create multiple factor to represent duplex */
+ if ((phy_status >> 13) & 1)
+ duplex = 1;
+ else
+ duplex = -1;
+
+ /* Speed is encoded on bits 15-14 */
+ switch ((phy_status >> 14) & 3) {
+ case 0: /* 10 Mbps */
+ return 10 * duplex;
+ case 1: /* 100 Mbps */
+ return 100 * duplex;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * Set the MAC address for a management port
+ *
+ * @port: Management port
+ * @mac: New MAC address. The lower 6 bytes are used.
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port, uint64_t mac)
+{
+ struct cvmx_mgmt_port_state *state;
+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ agl_gmx_rxx_adr_ctl.u64 = 0;
+ /* Only accept matching MAC addresses */
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1;
+ /* Drop multicast */
+ agl_gmx_rxx_adr_ctl.s.mcst = 0;
+ /* Allow broadcast */
+ agl_gmx_rxx_adr_ctl.s.bcst = 1;
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64);
+
+ /* Only using one of the CAMs */
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), (mac >> 40) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), (mac >> 32) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), (mac >> 24) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), (mac >> 16) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), (mac >> 8) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), (mac >> 0) & 0xff);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1);
+ state->mac = mac;
+
+ cvmx_spinlock_unlock(&state->lock);
+ return CVMX_MGMT_PORT_SUCCESS;
+}
+
+/**
+ * Get the MAC address for a management port
+ *
+ * @port: Management port
+ *
+ * Returns MAC address
+ */
+uint64_t cvmx_mgmt_port_get_mac(int port)
+{
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return CVMX_MGMT_PORT_INVALID_PARAM;
+
+ return cvmx_mgmt_port_state_ptr[port].mac;
+}
+
+/**
+ * Set the multicast list.
+ *
+ * @port: Management port
+ * @flags: Interface flags
+ *
+ * Returns
+ */
+void cvmx_mgmt_port_set_multicast_list(int port, int flags)
+{
+ struct cvmx_mgmt_port_state *state;
+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+
+ agl_gmx_rxx_adr_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port));
+
+ /* Allow broadcast MAC addresses */
+ if (!agl_gmx_rxx_adr_ctl.s.bcst)
+ agl_gmx_rxx_adr_ctl.s.bcst = 1;
+
+ if ((flags & CVMX_IFF_ALLMULTI) || (flags & CVMX_IFF_PROMISC))
+ /* Force accept multicast packets */
+ agl_gmx_rxx_adr_ctl.s.mcst = 2;
+ else
+ /* Force reject multicast packets */
+ agl_gmx_rxx_adr_ctl.s.mcst = 1;
+
+ if (flags & CVMX_IFF_PROMISC)
+ /*
+ * Reject matches if promisc. Since CAM is shut off,
+ * should accept everything.
+ */
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 0;
+ else
+ /* Filter packets based on the CAM */
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1;
+
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64);
+
+ if (flags & CVMX_IFF_PROMISC)
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 0);
+ else
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1);
+
+ cvmx_spinlock_unlock(&state->lock);
+}
+
+/**
+ * Set the maximum packet allowed in. Size is specified
+ * including L2 but without FCS. A normal MTU would corespond
+ * to 1514 assuming the standard 14 byte L2 header.
+ *
+ * @port: Management port
+ * @size_without_fcs:
+ * Size in bytes without FCS
+ */
+void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs)
+{
+ struct cvmx_mgmt_port_state *state;
+
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
+ return;
+
+ state = cvmx_mgmt_port_state_ptr + port;
+
+ cvmx_spinlock_lock(&state->lock);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs);
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port),
+ (size_without_fcs + 7) & 0xfff8);
+ cvmx_spinlock_unlock(&state->lock);
+}
--- /dev/null
+++ b/drivers/net/octeon/cvmx-mgmt-port.h
@@ -0,0 +1,168 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ *
+ * Support functions for managing the MII management port
+ *
+ */
+
+#ifndef __CVMX_MGMT_PORT_H__
+#define __CVMX_MGMT_PORT_H__
+
+enum cvmx_mgmt_port_result {
+ CVMX_MGMT_PORT_SUCCESS = 0,
+ CVMX_MGMT_PORT_NO_MEMORY = -1,
+ CVMX_MGMT_PORT_INVALID_PARAM = -2,
+};
+
+/* Enumeration of Net Device interface flags. */
+enum cvmx_mgmt_port_netdevice_flags {
+ CVMX_IFF_PROMISC = 0x100, /* receive all packets */
+ CVMX_IFF_ALLMULTI = 0x200, /* receive all multicast packets */
+};
+
+/**
+ * Called to initialize a management port for use. Multiple calls
+ * to this function accross applications is safe.
+ *
+ * @port: Port to initialize
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port);
+
+/**
+ * Shutdown a management port. This currently disables packet IO
+ * but leaves all hardware and buffers. Another application can then
+ * call initialize() without redoing the hardware setup.
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port);
+
+/**
+ * Enable packet IO on a management port
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port);
+
+/**
+ * Disable packet IO on a management port
+ *
+ * @port: Management port
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port);
+
+/**
+ * Send a packet out the management port. The packet is copied so
+ * the input buffer isn't used after this call.
+ *
+ * @port: Management port
+ * @packet_len: Length of the packet to send. It does not include the final CRC
+ * @buffer: Packet data
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len,
+ void *buffer);
+
+/**
+ * Receive a packet from the management port.
+ *
+ * @port: Management port
+ * @buffer_len: Size of the buffer to receive the packet into
+ * @buffer: Buffer to receive the packet into
+ *
+ * Returns The size of the packet, or a negative erorr code on failure. Zero
+ * means that no packets were available.
+ */
+extern int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer);
+
+/**
+ * Get the management port link status:
+ * 100 = 100Mbps, full duplex
+ * 10 = 10Mbps, full duplex
+ * 0 = Link down
+ * -10 = 10Mpbs, half duplex
+ * -100 = 100Mbps, half duplex
+ *
+ * @port: Management port
+ *
+ * Returns
+ */
+extern int cvmx_mgmt_port_get_link(int port);
+
+/**
+ * Set the MAC address for a management port
+ *
+ * @port: Management port
+ * @mac: New MAC address. The lower 6 bytes are used.
+ *
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
+ */
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port,
+ uint64_t mac);
+
+/**
+ * Get the MAC address for a management port
+ *
+ * @port: Management port
+ *
+ * Returns MAC address
+ */
+extern uint64_t cvmx_mgmt_port_get_mac(int port);
+
+/**
+ * Set the multicast list.
+ *
+ * @port: Management port
+ * @flags: Interface flags
+ *
+ * Returns
+ */
+extern void cvmx_mgmt_port_set_multicast_list(int port, int flags);
+
+/**
+ * Set the maximum packet allowed in. Size is specified
+ * including L2 but without FCS. A normal MTU would corespond
+ * to 1514 assuming the standard 14 byte L2 header.
+ *
+ * @port: Management port
+ * @size_without_crc:
+ * Size in bytes without FCS
+ */
+extern void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs);
+
+#endif /* __CVMX_MGMT_PORT_H__ */
--- /dev/null
+++ b/drivers/net/octeon/octeon-mgmt-port.c
@@ -0,0 +1,389 @@
+/*
+ * Octeon Management Port Ethernet Driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, 2008 Cavium Networks
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-mixx-defs.h>
+#include <asm/octeon/cvmx-agl-defs.h>
+
+#include "cvmx-mgmt-port.h"
+
+static struct net_device *global_dev[2] = { NULL, NULL };
+
+#define DEBUGPRINT(format, ...) do {if (printk_ratelimit()) \
+ printk(format, ##__VA_ARGS__); \
+ } while (0)
+
+/**
+ * This is the definition of the Ethernet driver's private
+ * driver state stored in dev->priv.
+ */
+struct device_private {
+ int port;
+ struct net_device_stats stats; /* Device statistics */
+};
+
+
+/**
+ * Packet transmit
+ *
+ * @param skb Packet to send
+ * @param dev Device info structure
+ * @return Always returns zero
+ */
+static int packet_transmit(struct sk_buff *skb, struct net_device *dev)
+{
+ uint64_t flags;
+ struct device_private *priv = netdev_priv(dev);
+ enum cvmx_mgmt_port_result result;
+ local_irq_save(flags);
+ result = cvmx_mgmt_port_send(priv->port, skb->len, skb->data);
+ local_irq_restore(flags);
+ if (result == CVMX_MGMT_PORT_SUCCESS) {
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += skb->len;
+ } else {
+ /* DEBUGPRINT("ERROR: cvmx_mgmt_port_send() failed with %d\n",
+ result);
+ */
+ priv->stats.tx_dropped++;
+ }
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+
+/**
+ * Interrupt handler. The interrupt occurs whenever the POW
+ * transitions from 0->1 packets in our group.
+ *
+ * @param cpl
+ * @param dev_id
+ * @param regs
+ * @return
+ */
+static irqreturn_t do_interrupt(int cpl, void *dev_id)
+{
+ uint64_t flags;
+ struct sk_buff *skb;
+ int result;
+ char packet[2048];
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct device_private *priv = netdev_priv(dev);
+
+ do {
+ local_irq_save(flags);
+ result = cvmx_mgmt_port_receive(priv->port, sizeof(packet),
+ packet);
+ local_irq_restore(flags);
+
+ /* Silently drop packets if we aren't up */
+ if ((dev->flags & IFF_UP) == 0)
+ continue;
+
+ if (result > 0) {
+ skb = dev_alloc_skb(result);
+ if (skb) {
+ memcpy(skb_put(skb, result), packet, result);
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ priv->stats.rx_bytes += skb->len;
+ priv->stats.rx_packets++;
+ netif_rx(skb);
+ } else {
+ DEBUGPRINT("%s: Failed to allocate skbuff, "
+ "packet dropped\n",
+ dev->name);
+ priv->stats.rx_dropped++;
+ }
+ } else if (result < 0) {
+ DEBUGPRINT("%s: Receive error code %d, packet "
+ "dropped\n",
+ dev->name, result);
+ priv->stats.rx_errors++;
+ }
+ } while (result != 0);
+
+ /* Clear any pending interrupts */
+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port),
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port)));
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port));
+
+ return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * This is called when the kernel needs to manually poll the
+ * device. For Octeon, this is simply calling the interrupt
+ * handler. We actually poll all the devices, not just the
+ * one supplied.
+ *
+ * @param dev Device to poll. Unused
+ */
+static void device_poll_controller(struct net_device *dev)
+{
+ do_interrupt(0, dev);
+}
+#endif
+
+
+/**
+ * Open a device for use. Device should be able to send and
+ * receive packets after this is called.
+ *
+ * @param dev Device to bring up
+ * @return Zero on success
+ */
+static int device_open(struct net_device *dev)
+{
+ /* Clear the statistics whenever the interface is brought up */
+ struct device_private *priv = netdev_priv(dev);
+ memset(&priv->stats, 0, sizeof(priv->stats));
+ cvmx_mgmt_port_enable(priv->port);
+ return 0;
+}
+
+
+/**
+ * Stop an ethernet device. No more packets should be
+ * received from this device.
+ *
+ * @param dev Device to bring down
+ * @return Zero on success
+ */
+static int device_close(struct net_device *dev)
+{
+ struct device_private *priv = netdev_priv(dev);
+ cvmx_mgmt_port_disable(priv->port);
+ return 0;
+}
+
+
+/**
+ * Get the low level ethernet statistics
+ *
+ * @param dev Device to get the statistics from
+ * @return Pointer to the statistics
+ */
+static struct net_device_stats *device_get_stats(struct net_device *dev)
+{
+ struct device_private *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+/**
+ * Set the multicast list. Currently unimplemented.
+ *
+ * @param dev Device to work on
+ */
+static void ethernet_mgmt_port_set_multicast_list(struct net_device *dev)
+{
+ struct device_private *priv = netdev_priv(dev);
+ int port = priv->port;
+ int num_ports;
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ num_ports = 2;
+ else
+ num_ports = 1;
+ if (port < num_ports)
+ cvmx_mgmt_port_set_multicast_list(port, dev->flags);
+}
+
+/**
+ * Set the hardware MAC address for a management port device
+ *
+ * @param dev Device to change the MAC address for
+ * @param addr Address structure to change it too. MAC address is addr + 2.
+ * @return Zero on success
+ */
+static int ethernet_mgmt_port_set_mac_address(struct net_device *dev,
+ void *addr)
+{
+ struct device_private *priv = netdev_priv(dev);
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_cfg;
+ int port = priv->port;
+ int num_ports;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ num_ports = 2;
+ else
+ num_ports = 1;
+
+ memcpy(dev->dev_addr, addr + 2, 6);
+
+ if (port < num_ports) {
+ int i;
+ uint8_t *ptr = addr;
+ uint64_t mac = 0;
+ for (i = 0; i < 6; i++)
+ mac = (mac<<8) | (uint64_t)(ptr[i+2]);
+
+ agl_gmx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
+ cvmx_mgmt_port_set_mac(port, mac);
+ ethernet_mgmt_port_set_multicast_list(dev);
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_cfg.u64);
+ }
+ return 0;
+}
+
+/**
+ * Per network device initialization
+ *
+ * @param dev Device to initialize
+ * @return Zero on success
+ */
+static int device_init(struct net_device *dev)
+{
+ struct device_private *priv = netdev_priv(dev);
+ uint64_t mac = cvmx_mgmt_port_get_mac(priv->port);
+
+ dev->hard_start_xmit = packet_transmit;
+ dev->get_stats = device_get_stats;
+ dev->open = device_open;
+ dev->stop = device_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = device_poll_controller;
+#endif
+ dev->dev_addr[0] = (mac >> 40) & 0xff;
+ dev->dev_addr[1] = (mac >> 32) & 0xff;
+ dev->dev_addr[2] = (mac >> 24) & 0xff;
+ dev->dev_addr[3] = (mac >> 16) & 0xff;
+ dev->dev_addr[4] = (mac >> 8) & 0xff;
+ dev->dev_addr[5] = (mac >> 0) & 0xff;
+ return 0;
+}
+
+
+/**
+ * Module/ driver initialization. Creates the linux network
+ * devices.
+ *
+ * @return Zero on success
+ */
+static int __init ethernet_mgmt_port_init(void)
+{
+ struct net_device *dev;
+ struct device_private *priv;
+ union cvmx_mixx_irhwm mix_irhwm;
+ union cvmx_mixx_intena mix_intena;
+ int num_ports;
+ int port;
+
+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
+ return 0;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ num_ports = 2;
+ else
+ num_ports = 1;
+
+ printk("Octeon management port ethernet driver\n");
+
+ for (port = 0; port < num_ports; port++) {
+ if (cvmx_mgmt_port_initialize(port) != CVMX_MGMT_PORT_SUCCESS) {
+ pr_err("ERROR: cvmx_mgmt_port_initialize(%d) "
+ "failed\n", port);
+ return -1;
+ }
+
+ /* Setup is complete, create the virtual ethernet devices */
+ dev = alloc_etherdev(sizeof(struct device_private));
+ if (dev == NULL) {
+ pr_err("ERROR: Failed to allocate ethernet device\n");
+ return -1;
+ }
+
+ dev->init = device_init;
+ strcpy(dev->name, "mgmt%d");
+
+ /* Initialize the device private structure. */
+ priv = netdev_priv(dev);
+ memset(priv, 0, sizeof(struct device_private));
+ priv->port = port;
+
+ if (register_netdev(dev) < 0) {
+ pr_err("ERROR: Failed to register ethernet device\n");
+ kfree(dev);
+ return -1;
+ }
+
+ /* Clear any pending interrupts */
+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port),
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port)));
+
+ /* Register an IRQ hander for to receive interrupts */
+ dev->irq =
+ (priv->port == 0) ? OCTEON_IRQ_MII0 : OCTEON_IRQ_MII1;
+ if (request_irq(dev->irq, do_interrupt, IRQF_SHARED, dev->name,
+ dev))
+ pr_err("ethernet-mgmt: Failed to assign "
+ "interrupt %d\n", dev->irq);
+
+ /* Interrupt every single RX packet */
+ mix_irhwm.u64 = 0;
+ mix_irhwm.s.irhwm = 0;
+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), mix_irhwm.u64);
+
+ /* Enable receive interrupts */
+ mix_intena.u64 = 0;
+ mix_intena.s.ithena = 1;
+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), mix_intena.u64);
+
+ global_dev[priv->port] = dev;
+
+ dev->set_mac_address = ethernet_mgmt_port_set_mac_address;
+ dev->set_multicast_list = ethernet_mgmt_port_set_multicast_list;
+ }
+ return 0;
+}
+
+
+/**
+ * Module / driver shutdown
+ *
+ * @return Zero on success
+ */
+static void __exit ethernet_mgmt_port_cleanup(void)
+{
+ int port;
+ for (port = 0; port < 2; port++) {
+ if (global_dev[port]) {
+ struct device_private *priv =
+ netdev_priv(global_dev[port]);
+ /* Disable interrupt */
+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), 0);
+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), 0);
+ cvmx_mgmt_port_shutdown(priv->port);
+
+ /* Free the interrupt handler */
+ free_irq(global_dev[port]->irq, global_dev[port]);
+
+ /* Free the ethernet devices */
+ unregister_netdev(global_dev[port]);
+ kfree(global_dev[port]);
+ global_dev[port] = NULL;
+ }
+ }
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium Networks Octeon management port ethernet driver.");
+module_init(ethernet_mgmt_port_init);
+module_exit(ethernet_mgmt_port_cleanup);
View Git Blame Copy Permalink