mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-11 10:03:08 +02:00
b6db7329f4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2023 lines
56 KiB
Diff
2023 lines
56 KiB
Diff
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
|
|
---
|
|
arch/mips/include/asm/octeon/cvmx-mdio.h | 577 +++++++++++++++++++++
|
|
drivers/net/Kconfig | 8 +
|
|
drivers/net/Makefile | 1 +
|
|
drivers/net/octeon/Makefile | 11 +
|
|
drivers/net/octeon/cvmx-mgmt-port.c | 818 ++++++++++++++++++++++++++++++
|
|
drivers/net/octeon/cvmx-mgmt-port.h | 168 ++++++
|
|
drivers/net/octeon/octeon-mgmt-port.c | 389 ++++++++++++++
|
|
7 files changed, 1972 insertions(+), 0 deletions(-)
|
|
create mode 100644 arch/mips/include/asm/octeon/cvmx-mdio.h
|
|
create mode 100644 drivers/net/octeon/Makefile
|
|
create mode 100644 drivers/net/octeon/cvmx-mgmt-port.c
|
|
create mode 100644 drivers/net/octeon/cvmx-mgmt-port.h
|
|
create mode 100644 drivers/net/octeon/octeon-mgmt-port.c
|
|
|
|
--- /dev/null
|
|
+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h
|
|
@@ -0,0 +1,577 @@
|
|
+/***********************license start***************
|
|
+ * Author: Cavium Networks
|
|
+ *
|
|
+ * Contact: support@caviumnetworks.com
|
|
+ * This file is part of the OCTEON SDK
|
|
+ *
|
|
+ * Copyright (c) 2003-2008 Cavium Networks
|
|
+ *
|
|
+ * This file is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, Version 2, as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful, but
|
|
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
|
|
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
+ * NONINFRINGEMENT. See the GNU General Public License for more
|
|
+ * details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this file; if not, write to the Free Software
|
|
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
+ * or visit http://www.gnu.org/licenses/.
|
|
+ *
|
|
+ * This file may also be available under a different license from Cavium.
|
|
+ * Contact Cavium Networks for more information
|
|
+ ***********************license end**************************************/
|
|
+
|
|
+/**
|
|
+ *
|
|
+ * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3
|
|
+ * clause 22 and clause 45 operations.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#ifndef __CVMX_MIO_H__
|
|
+#define __CVMX_MIO_H__
|
|
+
|
|
+#include "cvmx-smix-defs.h"
|
|
+
|
|
+/**
|
|
+ * PHY register 0 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_CONTROL 0
|
|
+union cvmx_mdio_phy_reg_control {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t reset:1;
|
|
+ uint16_t loopback:1;
|
|
+ uint16_t speed_lsb:1;
|
|
+ uint16_t autoneg_enable:1;
|
|
+ uint16_t power_down:1;
|
|
+ uint16_t isolate:1;
|
|
+ uint16_t restart_autoneg:1;
|
|
+ uint16_t duplex:1;
|
|
+ uint16_t collision_test:1;
|
|
+ uint16_t speed_msb:1;
|
|
+ uint16_t unidirectional_enable:1;
|
|
+ uint16_t reserved_0_4:5;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 1 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_STATUS 1
|
|
+union cvmx_mdio_phy_reg_status {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t capable_100base_t4:1;
|
|
+ uint16_t capable_100base_x_full:1;
|
|
+ uint16_t capable_100base_x_half:1;
|
|
+ uint16_t capable_10_full:1;
|
|
+ uint16_t capable_10_half:1;
|
|
+ uint16_t capable_100base_t2_full:1;
|
|
+ uint16_t capable_100base_t2_half:1;
|
|
+ uint16_t capable_extended_status:1;
|
|
+ uint16_t capable_unidirectional:1;
|
|
+ uint16_t capable_mf_preamble_suppression:1;
|
|
+ uint16_t autoneg_complete:1;
|
|
+ uint16_t remote_fault:1;
|
|
+ uint16_t capable_autoneg:1;
|
|
+ uint16_t link_status:1;
|
|
+ uint16_t jabber_detect:1;
|
|
+ uint16_t capable_extended_registers:1;
|
|
+
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 2 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_ID1 2
|
|
+union cvmx_mdio_phy_reg_id1 {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t oui_bits_3_18;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 3 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_ID2 3
|
|
+union cvmx_mdio_phy_reg_id2 {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t oui_bits_19_24:6;
|
|
+ uint16_t model:6;
|
|
+ uint16_t revision:4;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 4 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4
|
|
+union cvmx_mdio_phy_reg_autoneg_adver {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t next_page:1;
|
|
+ uint16_t reserved_14:1;
|
|
+ uint16_t remote_fault:1;
|
|
+ uint16_t reserved_12:1;
|
|
+ uint16_t asymmetric_pause:1;
|
|
+ uint16_t pause:1;
|
|
+ uint16_t advert_100base_t4:1;
|
|
+ uint16_t advert_100base_tx_full:1;
|
|
+ uint16_t advert_100base_tx_half:1;
|
|
+ uint16_t advert_10base_tx_full:1;
|
|
+ uint16_t advert_10base_tx_half:1;
|
|
+ uint16_t selector:5;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 5 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5
|
|
+union cvmx_mdio_phy_reg_link_partner_ability {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t next_page:1;
|
|
+ uint16_t ack:1;
|
|
+ uint16_t remote_fault:1;
|
|
+ uint16_t reserved_12:1;
|
|
+ uint16_t asymmetric_pause:1;
|
|
+ uint16_t pause:1;
|
|
+ uint16_t advert_100base_t4:1;
|
|
+ uint16_t advert_100base_tx_full:1;
|
|
+ uint16_t advert_100base_tx_half:1;
|
|
+ uint16_t advert_10base_tx_full:1;
|
|
+ uint16_t advert_10base_tx_half:1;
|
|
+ uint16_t selector:5;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 6 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6
|
|
+union cvmx_mdio_phy_reg_autoneg_expansion {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t reserved_5_15:11;
|
|
+ uint16_t parallel_detection_fault:1;
|
|
+ uint16_t link_partner_next_page_capable:1;
|
|
+ uint16_t local_next_page_capable:1;
|
|
+ uint16_t page_received:1;
|
|
+ uint16_t link_partner_autoneg_capable:1;
|
|
+
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 9 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_CONTROL_1000 9
|
|
+union cvmx_mdio_phy_reg_control_1000 {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t test_mode:3;
|
|
+ uint16_t manual_master_slave:1;
|
|
+ uint16_t master:1;
|
|
+ uint16_t port_type:1;
|
|
+ uint16_t advert_1000base_t_full:1;
|
|
+ uint16_t advert_1000base_t_half:1;
|
|
+ uint16_t reserved_0_7:8;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 10 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_STATUS_1000 10
|
|
+union cvmx_mdio_phy_reg_status_1000 {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t master_slave_fault:1;
|
|
+ uint16_t is_master:1;
|
|
+ uint16_t local_receiver_ok:1;
|
|
+ uint16_t remote_receiver_ok:1;
|
|
+ uint16_t remote_capable_1000base_t_full:1;
|
|
+ uint16_t remote_capable_1000base_t_half:1;
|
|
+ uint16_t reserved_8_9:2;
|
|
+ uint16_t idle_error_count:8;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 15 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15
|
|
+union cvmx_mdio_phy_reg_extended_status {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t capable_1000base_x_full:1;
|
|
+ uint16_t capable_1000base_x_half:1;
|
|
+ uint16_t capable_1000base_t_full:1;
|
|
+ uint16_t capable_1000base_t_half:1;
|
|
+ uint16_t reserved_0_11:12;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 13 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13
|
|
+union cvmx_mdio_phy_reg_mmd_control {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t function:2;
|
|
+ uint16_t reserved_5_13:9;
|
|
+ uint16_t devad:5;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * PHY register 14 from the 802.3 spec
|
|
+ */
|
|
+#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14
|
|
+union cvmx_mdio_phy_reg_mmd_address_data {
|
|
+ uint16_t u16;
|
|
+ struct {
|
|
+ uint16_t address_data:16;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/* Operating request encodings. */
|
|
+#define MDIO_CLAUSE_22_WRITE 0
|
|
+#define MDIO_CLAUSE_22_READ 1
|
|
+
|
|
+#define MDIO_CLAUSE_45_ADDRESS 0
|
|
+#define MDIO_CLAUSE_45_WRITE 1
|
|
+#define MDIO_CLAUSE_45_READ_INC 2
|
|
+#define MDIO_CLAUSE_45_READ 3
|
|
+
|
|
+/* MMD identifiers, mostly for accessing devices withing XENPAK modules. */
|
|
+#define CVMX_MMD_DEVICE_PMA_PMD 1
|
|
+#define CVMX_MMD_DEVICE_WIS 2
|
|
+#define CVMX_MMD_DEVICE_PCS 3
|
|
+#define CVMX_MMD_DEVICE_PHY_XS 4
|
|
+#define CVMX_MMD_DEVICE_DTS_XS 5
|
|
+#define CVMX_MMD_DEVICE_TC 6
|
|
+#define CVMX_MMD_DEVICE_CL22_EXT 29
|
|
+#define CVMX_MMD_DEVICE_VENDOR_1 30
|
|
+#define CVMX_MMD_DEVICE_VENDOR_2 31
|
|
+
|
|
+/**
|
|
+ * Perform an MII read. This function is used to read PHY
|
|
+ * registers controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @location: Register location to read
|
|
+ *
|
|
+ * Returns Result from the read or -1 on failure
|
|
+ */
|
|
+static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
|
|
+{
|
|
+ union cvmx_smix_cmd smi_cmd;
|
|
+ union cvmx_smix_rd_dat smi_rd;
|
|
+ int timeout = 1000;
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = location;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
|
|
+ } while (smi_rd.s.pending && timeout--);
|
|
+
|
|
+ if (smi_rd.s.val)
|
|
+ return smi_rd.s.dat;
|
|
+ else
|
|
+ return -1;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Perform an MII write. This function is used to write PHY
|
|
+ * registers controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @location: Register location to write
|
|
+ * @val: Value to write
|
|
+ *
|
|
+ * Returns -1 on error
|
|
+ * 0 on success
|
|
+ */
|
|
+static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
|
|
+{
|
|
+ union cvmx_smix_cmd smi_cmd;
|
|
+ union cvmx_smix_wr_dat smi_wr;
|
|
+ int timeout = 1000;
|
|
+
|
|
+ smi_wr.u64 = 0;
|
|
+ smi_wr.s.dat = val;
|
|
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = location;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
|
|
+ } while (smi_wr.s.pending && --timeout);
|
|
+ if (timeout <= 0)
|
|
+ return -1;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Perform an IEEE 802.3 clause 45 MII read using clause 22 operations. This
|
|
+ * function is used to read PHY registers controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @device: MDIO Managable Device (MMD) id
|
|
+ * @location: Register location to read
|
|
+ *
|
|
+ * Returns Result from the read or -1 on failure
|
|
+ */
|
|
+
|
|
+static inline int cvmx_mdio_45_via_22_read(int bus_id, int phy_id, int device,
|
|
+ int location)
|
|
+{
|
|
+ union cvmx_mdio_phy_reg_mmd_control mmd_control;
|
|
+
|
|
+ /*
|
|
+ * a) To Register 13, write the Function field to 00 (address)
|
|
+ * and DEVAD field to the device address value for the
|
|
+ * desired MMD;
|
|
+ */
|
|
+ mmd_control.u16 = 0;
|
|
+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS;
|
|
+ mmd_control.s.devad = device;
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
|
|
+ mmd_control.u16);
|
|
+
|
|
+ /*
|
|
+ * b) To Register 14, write the desired address value to the
|
|
+ * MMD's address register;
|
|
+ */
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA,
|
|
+ location);
|
|
+
|
|
+ /*
|
|
+ * c) To Register 13, write the Function field to 01 (Data, no
|
|
+ * post increment) and DEVAD field to the same device
|
|
+ * address value for the desired MMD;
|
|
+ */
|
|
+ mmd_control.u16 = 0;
|
|
+ mmd_control.s.function = MDIO_CLAUSE_45_READ;
|
|
+ mmd_control.s.devad = device;
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
|
|
+ mmd_control.u16);
|
|
+
|
|
+ /*
|
|
+ * d) From Register 14, read the content of the MMD's selected
|
|
+ * register.
|
|
+ */
|
|
+ return cvmx_mdio_read(bus_id, phy_id,
|
|
+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Perform an IEEE 802.3 clause 45 MII write using clause 22
|
|
+ * operations. This function is used to write PHY registers
|
|
+ * controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @device: MDIO Managable Device (MMD) id
|
|
+ * @location: Register location to write
|
|
+ * @val: Value to write
|
|
+ *
|
|
+ * Returns -1 on error
|
|
+ * 0 on success
|
|
+ */
|
|
+static inline int cvmx_mdio_45_via_22_write(int bus_id, int phy_id, int device,
|
|
+ int location, int val)
|
|
+{
|
|
+ union cvmx_mdio_phy_reg_mmd_control mmd_control;
|
|
+
|
|
+ /*
|
|
+ * a) To Register 13, write the Function field to 00 (address)
|
|
+ * and DEVAD field to the device address value for the
|
|
+ * desired MMD;
|
|
+ */
|
|
+ mmd_control.u16 = 0;
|
|
+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS;
|
|
+ mmd_control.s.devad = device;
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
|
|
+ mmd_control.u16);
|
|
+
|
|
+ /*
|
|
+ * b) To Register 14, write the desired address value to the
|
|
+ * MMD's address register;
|
|
+ */
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA,
|
|
+ location);
|
|
+
|
|
+ /*
|
|
+ * c) To Register 13, write the Function field to 01 (Data, no
|
|
+ * post increment) and DEVAD field to the same device
|
|
+ * address value for the desired MMD;
|
|
+ */
|
|
+ mmd_control.u16 = 0;
|
|
+ mmd_control.s.function = MDIO_CLAUSE_45_READ;
|
|
+ mmd_control.s.devad = device;
|
|
+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL,
|
|
+ mmd_control.u16);
|
|
+
|
|
+ /*
|
|
+ * d) To Register 14, write the content of the MMD's selected
|
|
+ * register.
|
|
+ */
|
|
+ return cvmx_mdio_write(bus_id, phy_id,
|
|
+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA, val);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Perform an IEEE 802.3 clause 45 MII read. This function is used to read PHY
|
|
+ * registers controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @device: MDIO Managable Device (MMD) id
|
|
+ * @location: Register location to read
|
|
+ *
|
|
+ * Returns Result from the read or -1 on failure
|
|
+ */
|
|
+
|
|
+static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
|
|
+ int location)
|
|
+{
|
|
+ union cvmx_smix_cmd smi_cmd;
|
|
+ union cvmx_smix_rd_dat smi_rd;
|
|
+ union cvmx_smix_wr_dat smi_wr;
|
|
+ int timeout = 1000;
|
|
+
|
|
+ smi_wr.u64 = 0;
|
|
+ smi_wr.s.dat = location;
|
|
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = device;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
|
|
+ } while (smi_wr.s.pending && --timeout);
|
|
+ if (timeout <= 0)
|
|
+ return -1;
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = device;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
|
|
+ } while (smi_rd.s.pending && timeout--);
|
|
+
|
|
+ if (0 == timeout)
|
|
+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
|
|
+ "device %2d register %2d TIME OUT\n",
|
|
+ bus_id, phy_id, device, location);
|
|
+
|
|
+ if (smi_rd.s.val)
|
|
+ return smi_rd.s.dat;
|
|
+ else {
|
|
+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
|
|
+ "device %2d register %2d INVALID READ\n",
|
|
+ bus_id, phy_id, device, location);
|
|
+ return -1;
|
|
+ }
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Perform an IEEE 802.3 clause 45 MII write. This function is used to
|
|
+ * write PHY registers controlling auto negotiation.
|
|
+ *
|
|
+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
|
|
+ * support multiple busses.
|
|
+ * @phy_id: The MII phy id
|
|
+ * @device: MDIO Managable Device (MMD) id
|
|
+ * @location: Register location to write
|
|
+ * @val: Value to write
|
|
+ *
|
|
+ * Returns -1 on error
|
|
+ * 0 on success
|
|
+ */
|
|
+static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
|
|
+ int location, int val)
|
|
+{
|
|
+ union cvmx_smix_cmd smi_cmd;
|
|
+ union cvmx_smix_wr_dat smi_wr;
|
|
+ int timeout = 1000;
|
|
+
|
|
+ smi_wr.u64 = 0;
|
|
+ smi_wr.s.dat = location;
|
|
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = device;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
|
|
+ } while (smi_wr.s.pending && --timeout);
|
|
+ if (timeout <= 0)
|
|
+ return -1;
|
|
+
|
|
+ smi_wr.u64 = 0;
|
|
+ smi_wr.s.dat = val;
|
|
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
|
|
+
|
|
+ smi_cmd.u64 = 0;
|
|
+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE;
|
|
+ smi_cmd.s.phy_adr = phy_id;
|
|
+ smi_cmd.s.reg_adr = device;
|
|
+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
|
|
+
|
|
+ do {
|
|
+ cvmx_wait(1000);
|
|
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
|
|
+ } while (smi_wr.s.pending && --timeout);
|
|
+ if (timeout <= 0)
|
|
+ return -1;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#endif
|
|
--- a/drivers/net/Kconfig
|
|
+++ b/drivers/net/Kconfig
|
|
@@ -2035,6 +2035,14 @@ config ATL2
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called atl2.
|
|
|
|
+config OCTEON_MGMT
|
|
+ tristate "OCTEON Management port ethernet driver (CN5XXX)"
|
|
+ depends on CPU_CAVIUM_OCTEON
|
|
+ default y
|
|
+ help
|
|
+ This option enables the ethernet driver for the management port on
|
|
+ CN52XX, CN57XX, CN56XX, CN55XX, and CN54XX chips.
|
|
+
|
|
source "drivers/net/fs_enet/Kconfig"
|
|
|
|
endif # NET_ETHERNET
|
|
--- a/drivers/net/Makefile
|
|
+++ b/drivers/net/Makefile
|
|
@@ -234,6 +234,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
|
|
obj-$(CONFIG_MLX4_CORE) += mlx4/
|
|
obj-$(CONFIG_ENC28J60) += enc28j60.o
|
|
obj-$(CONFIG_ETHOC) += ethoc.o
|
|
+obj-$(CONFIG_OCTEON_MGMT) += octeon/
|
|
|
|
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
|
|
|
|
--- /dev/null
|
|
+++ b/drivers/net/octeon/Makefile
|
|
@@ -0,0 +1,11 @@
|
|
+# Makefile for the Cavium OCTEON Ethernet drivers.
|
|
+#
|
|
+# This file is subject to the terms and conditions of the GNU General Public
|
|
+# License. See the file "COPYING" in the main directory of this archive
|
|
+# for more details.
|
|
+#
|
|
+# Copyright (C) 2008 Cavium Networks
|
|
+
|
|
+obj-$(CONFIG_OCTEON_MGMT) += octeon_mgmt.o
|
|
+
|
|
+octeon_mgmt-objs := octeon-mgmt-port.o cvmx-mgmt-port.o
|
|
\ No newline at end of file
|
|
--- /dev/null
|
|
+++ b/drivers/net/octeon/cvmx-mgmt-port.c
|
|
@@ -0,0 +1,818 @@
|
|
+/***********************license start***************
|
|
+ * Author: Cavium Networks
|
|
+ *
|
|
+ * Contact: support@caviumnetworks.com
|
|
+ * This file is part of the OCTEON SDK
|
|
+ *
|
|
+ * Copyright (c) 2003-2008 Cavium Networks
|
|
+ *
|
|
+ * This file is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, Version 2, as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful, but
|
|
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
|
|
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
+ * NONINFRINGEMENT. See the GNU General Public License for more
|
|
+ * details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this file; if not, write to the Free Software
|
|
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
+ * or visit http://www.gnu.org/licenses/.
|
|
+ *
|
|
+ * This file may also be available under a different license from Cavium.
|
|
+ * Contact Cavium Networks for more information
|
|
+ ***********************license end**************************************/
|
|
+
|
|
+/**
|
|
+ *
|
|
+ * Support functions for managing the MII management port
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <asm/octeon/octeon.h>
|
|
+#include <asm/octeon/cvmx-spinlock.h>
|
|
+#include <asm/octeon/cvmx-bootmem.h>
|
|
+#include <asm/octeon/cvmx-mdio.h>
|
|
+
|
|
+#include <asm/octeon/cvmx-mixx-defs.h>
|
|
+#include <asm/octeon/cvmx-agl-defs.h>
|
|
+
|
|
+#include "cvmx-mgmt-port.h"
|
|
+
|
|
+#define CVMX_MGMT_PORT_NUM_PORTS 2
|
|
+/* Number of TX ring buffer entries and buffers */
|
|
+#define CVMX_MGMT_PORT_NUM_TX_BUFFERS 16
|
|
+/* Number of RX ring buffer entries and buffers */
|
|
+#define CVMX_MGMT_PORT_NUM_RX_BUFFERS 128
|
|
+
|
|
+#define CVMX_MGMT_PORT_TX_BUFFER_SIZE 12288
|
|
+#define CVMX_MGMT_PORT_RX_BUFFER_SIZE 1536
|
|
+
|
|
+/**
|
|
+ * Format of the TX/RX ring buffer entries
|
|
+ */
|
|
+union cvmx_mgmt_port_ring_entry {
|
|
+ uint64_t u64;
|
|
+ struct {
|
|
+ uint64_t reserved_62_63:2;
|
|
+ /* Length of the buffer/packet in bytes */
|
|
+ uint64_t len:14;
|
|
+ /* The RX error code */
|
|
+ uint64_t code:8;
|
|
+ /* Physical address of the buffer */
|
|
+ uint64_t addr:40;
|
|
+ } s;
|
|
+};
|
|
+
|
|
+/**
|
|
+ * Per port state required for each mgmt port
|
|
+ */
|
|
+struct cvmx_mgmt_port_state {
|
|
+ /* Used for exclusive access to this structure */
|
|
+ cvmx_spinlock_t lock;
|
|
+ /* Where the next TX will write in the tx_ring and tx_buffers */
|
|
+ int tx_write_index;
|
|
+ /* Where the next RX will be in the rx_ring and rx_buffers */
|
|
+ int rx_read_index;
|
|
+ /* The SMI/MDIO PHY address */
|
|
+ int phy_id;
|
|
+ /* Our MAC address */
|
|
+ uint64_t mac;
|
|
+ union cvmx_mgmt_port_ring_entry tx_ring[CVMX_MGMT_PORT_NUM_TX_BUFFERS];
|
|
+ union cvmx_mgmt_port_ring_entry rx_ring[CVMX_MGMT_PORT_NUM_RX_BUFFERS];
|
|
+ char tx_buffers[CVMX_MGMT_PORT_NUM_TX_BUFFERS]
|
|
+ [CVMX_MGMT_PORT_TX_BUFFER_SIZE];
|
|
+ char rx_buffers[CVMX_MGMT_PORT_NUM_RX_BUFFERS]
|
|
+ [CVMX_MGMT_PORT_RX_BUFFER_SIZE];
|
|
+};
|
|
+
|
|
+/**
|
|
+ * Pointers to each mgmt port's state
|
|
+ */
|
|
+struct cvmx_mgmt_port_state *cvmx_mgmt_port_state_ptr;
|
|
+
|
|
+/**
|
|
+ * Return the number of management ports supported by this chip
|
|
+ *
|
|
+ * Returns Number of ports
|
|
+ */
|
|
+int __cvmx_mgmt_port_num_ports(void)
|
|
+{
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX))
|
|
+ return 1;
|
|
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
+ return 2;
|
|
+ else
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Called to initialize a management port for use. Multiple calls
|
|
+ * to this function accross applications is safe.
|
|
+ *
|
|
+ * @port: Port to initialize
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port)
|
|
+{
|
|
+ char *alloc_name = "cvmx_mgmt_port";
|
|
+ union cvmx_mixx_oring1 oring1;
|
|
+ union cvmx_mixx_ctl mix_ctl;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ cvmx_mgmt_port_state_ptr =
|
|
+ cvmx_bootmem_alloc_named(CVMX_MGMT_PORT_NUM_PORTS *
|
|
+ sizeof(struct cvmx_mgmt_port_state), 128,
|
|
+ alloc_name);
|
|
+ if (cvmx_mgmt_port_state_ptr) {
|
|
+ memset(cvmx_mgmt_port_state_ptr, 0,
|
|
+ CVMX_MGMT_PORT_NUM_PORTS *
|
|
+ sizeof(struct cvmx_mgmt_port_state));
|
|
+ } else {
|
|
+ struct cvmx_bootmem_named_block_desc *block_desc =
|
|
+ cvmx_bootmem_find_named_block(alloc_name);
|
|
+ if (block_desc)
|
|
+ cvmx_mgmt_port_state_ptr =
|
|
+ cvmx_phys_to_ptr(block_desc->base_addr);
|
|
+ else {
|
|
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_initialize: "
|
|
+ "Unable to get named block %s.\n",
|
|
+ alloc_name);
|
|
+ return CVMX_MGMT_PORT_NO_MEMORY;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Reset the MIX block if the previous user had a different TX
|
|
+ * ring size.
|
|
+ */
|
|
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
|
|
+ if (!mix_ctl.s.reset) {
|
|
+ oring1.u64 = cvmx_read_csr(CVMX_MIXX_ORING1(port));
|
|
+ if (oring1.s.osize != CVMX_MGMT_PORT_NUM_TX_BUFFERS) {
|
|
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
|
|
+ mix_ctl.s.en = 0;
|
|
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
|
|
+ do {
|
|
+ mix_ctl.u64 =
|
|
+ cvmx_read_csr(CVMX_MIXX_CTL(port));
|
|
+ } while (mix_ctl.s.busy);
|
|
+ mix_ctl.s.reset = 1;
|
|
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
|
|
+ cvmx_read_csr(CVMX_MIXX_CTL(port));
|
|
+ memset(cvmx_mgmt_port_state_ptr + port, 0,
|
|
+ sizeof(struct cvmx_mgmt_port_state));
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (cvmx_mgmt_port_state_ptr[port].tx_ring[0].u64 == 0) {
|
|
+ struct cvmx_mgmt_port_state *state =
|
|
+ cvmx_mgmt_port_state_ptr + port;
|
|
+ int i;
|
|
+ union cvmx_mixx_bist mix_bist;
|
|
+ union cvmx_agl_gmx_bist agl_gmx_bist;
|
|
+ union cvmx_mixx_oring1 oring1;
|
|
+ union cvmx_mixx_iring1 iring1;
|
|
+ union cvmx_mixx_ctl mix_ctl;
|
|
+
|
|
+ /* Make sure BIST passed */
|
|
+ mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(port));
|
|
+ if (mix_bist.u64)
|
|
+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: "
|
|
+ "Managment port MIX failed BIST "
|
|
+ "(0x%016llx)\n",
|
|
+ (unsigned long long)mix_bist.u64);
|
|
+
|
|
+ agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST);
|
|
+ if (agl_gmx_bist.u64)
|
|
+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: "
|
|
+ "Managment port AGL failed BIST "
|
|
+ "(0x%016llx)\n",
|
|
+ (unsigned long long)agl_gmx_bist.u64);
|
|
+
|
|
+ /* Clear all state information */
|
|
+ memset(state, 0, sizeof(*state));
|
|
+
|
|
+ /* Take the control logic out of reset */
|
|
+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port));
|
|
+ mix_ctl.s.reset = 0;
|
|
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
|
|
+
|
|
+ /* Set the PHY address */
|
|
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
|
|
+ state->phy_id = -1;
|
|
+ else
|
|
+ /* Will need to be change to match the board */
|
|
+ state->phy_id = port;
|
|
+
|
|
+ /* Create a default MAC address */
|
|
+ state->mac = 0x000000dead000000ull;
|
|
+ state->mac += 0xffffff & CAST64(state);
|
|
+
|
|
+ /* Setup the TX ring */
|
|
+ for (i = 0; i < CVMX_MGMT_PORT_NUM_TX_BUFFERS; i++) {
|
|
+ state->tx_ring[i].s.len = CVMX_MGMT_PORT_TX_BUFFER_SIZE;
|
|
+ state->tx_ring[i].s.addr =
|
|
+ cvmx_ptr_to_phys(state->tx_buffers[i]);
|
|
+ }
|
|
+
|
|
+ /* Tell the HW where the TX ring is */
|
|
+ oring1.u64 = 0;
|
|
+ oring1.s.obase = cvmx_ptr_to_phys(state->tx_ring) >> 3;
|
|
+ oring1.s.osize = CVMX_MGMT_PORT_NUM_TX_BUFFERS;
|
|
+ CVMX_SYNCWS;
|
|
+ cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64);
|
|
+
|
|
+ /* Setup the RX ring */
|
|
+ for (i = 0; i < CVMX_MGMT_PORT_NUM_RX_BUFFERS; i++) {
|
|
+ /* This size is -8 due to an errata for CN56XX pass 1 */
|
|
+ state->rx_ring[i].s.len =
|
|
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
|
|
+ state->rx_ring[i].s.addr =
|
|
+ cvmx_ptr_to_phys(state->rx_buffers[i]);
|
|
+ }
|
|
+
|
|
+ /* Tell the HW where the RX ring is */
|
|
+ iring1.u64 = 0;
|
|
+ iring1.s.ibase = cvmx_ptr_to_phys(state->rx_ring) >> 3;
|
|
+ iring1.s.isize = CVMX_MGMT_PORT_NUM_RX_BUFFERS;
|
|
+ CVMX_SYNCWS;
|
|
+ cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64);
|
|
+ cvmx_write_csr(CVMX_MIXX_IRING2(port),
|
|
+ CVMX_MGMT_PORT_NUM_RX_BUFFERS);
|
|
+
|
|
+ /* Disable the external input/output */
|
|
+ cvmx_mgmt_port_disable(port);
|
|
+
|
|
+ /* Set the MAC address filtering up */
|
|
+ cvmx_mgmt_port_set_mac(port, state->mac);
|
|
+
|
|
+ /*
|
|
+ * Set the default max size to an MTU of 1500 with L2
|
|
+ * and VLAN.
|
|
+ */
|
|
+ cvmx_mgmt_port_set_max_packet_size(port, 1518);
|
|
+
|
|
+ /*
|
|
+ * Enable the port HW. Packets are not allowed until
|
|
+ * cvmx_mgmt_port_enable() is called.
|
|
+ */
|
|
+ mix_ctl.u64 = 0;
|
|
+ /* Strip the ending CRC */
|
|
+ mix_ctl.s.crc_strip = 1;
|
|
+ /* Enable the port */
|
|
+ mix_ctl.s.en = 1;
|
|
+ /* Arbitration mode */
|
|
+ mix_ctl.s.nbtarb = 0;
|
|
+ /* MII CB-request FIFO programmable high watermark */
|
|
+ mix_ctl.s.mrq_hwm = 1;
|
|
+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64);
|
|
+
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
|
|
+ || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
|
|
+ /*
|
|
+ * Force compensation values, as they are not
|
|
+ * determined properly by HW.
|
|
+ */
|
|
+ union cvmx_agl_gmx_drv_ctl drv_ctl;
|
|
+
|
|
+ drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL);
|
|
+ if (port) {
|
|
+ drv_ctl.s.byp_en1 = 1;
|
|
+ drv_ctl.s.nctl1 = 6;
|
|
+ drv_ctl.s.pctl1 = 6;
|
|
+ } else {
|
|
+ drv_ctl.s.byp_en = 1;
|
|
+ drv_ctl.s.nctl = 6;
|
|
+ drv_ctl.s.pctl = 6;
|
|
+ }
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64);
|
|
+ }
|
|
+ }
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Shutdown a management port. This currently disables packet IO
|
|
+ * but leaves all hardware and buffers. Another application can then
|
|
+ * call initialize() without redoing the hardware setup.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port)
|
|
+{
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ /* Stop packets from comming in */
|
|
+ cvmx_mgmt_port_disable(port);
|
|
+
|
|
+ /*
|
|
+ * We don't free any memory so the next intialize can reuse
|
|
+ * the HW setup.
|
|
+ */
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Enable packet IO on a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
|
|
+ union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode;
|
|
+ union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ rxx_frm_ctl.u64 = 0;
|
|
+ rxx_frm_ctl.s.pre_align = 1;
|
|
+ /*
|
|
+ * When set, disables the length check for non-min sized pkts
|
|
+ * with padding in the client data.
|
|
+ */
|
|
+ rxx_frm_ctl.s.pad_len = 1;
|
|
+ /* When set, disables the length check for VLAN pkts */
|
|
+ rxx_frm_ctl.s.vlan_len = 1;
|
|
+ /* When set, PREAMBLE checking is less strict */
|
|
+ rxx_frm_ctl.s.pre_free = 1;
|
|
+ /* Control Pause Frames can match station SMAC */
|
|
+ rxx_frm_ctl.s.ctl_smac = 0;
|
|
+ /* Control Pause Frames can match globally assign Multicast address */
|
|
+ rxx_frm_ctl.s.ctl_mcst = 1;
|
|
+ /* Forward pause information to TX block */
|
|
+ rxx_frm_ctl.s.ctl_bck = 1;
|
|
+ /* Drop Control Pause Frames */
|
|
+ rxx_frm_ctl.s.ctl_drp = 1;
|
|
+ /* Strip off the preamble */
|
|
+ rxx_frm_ctl.s.pre_strp = 1;
|
|
+ /*
|
|
+ * This port is configured to send PREAMBLE+SFD to begin every
|
|
+ * frame. GMX checks that the PREAMBLE is sent correctly.
|
|
+ */
|
|
+ rxx_frm_ctl.s.pre_chk = 1;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64);
|
|
+
|
|
+ /* Enable the AGL block */
|
|
+ agl_gmx_inf_mode.u64 = 0;
|
|
+ agl_gmx_inf_mode.s.en = 1;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64);
|
|
+
|
|
+ /* Configure the port duplex and enables */
|
|
+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
|
|
+ agl_gmx_prtx.s.tx_en = 1;
|
|
+ agl_gmx_prtx.s.rx_en = 1;
|
|
+ if (cvmx_mgmt_port_get_link(port) < 0)
|
|
+ agl_gmx_prtx.s.duplex = 0;
|
|
+ else
|
|
+ agl_gmx_prtx.s.duplex = 1;
|
|
+ agl_gmx_prtx.s.en = 1;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
|
|
+
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Disable packet IO on a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
|
|
+ agl_gmx_prtx.s.en = 0;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
|
|
+
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Send a packet out the management port. The packet is copied so
|
|
+ * the input buffer isn't used after this call.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @packet_len: Length of the packet to send. It does not include the final CRC
|
|
+ * @buffer: Packet data
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len,
|
|
+ void *buffer)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ union cvmx_mixx_oring2 mix_oring2;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ /* Max sure the packet size is valid */
|
|
+ if ((packet_len < 1) || (packet_len > CVMX_MGMT_PORT_TX_BUFFER_SIZE))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ if (buffer == NULL)
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ mix_oring2.u64 = cvmx_read_csr(CVMX_MIXX_ORING2(port));
|
|
+ if (mix_oring2.s.odbell >= CVMX_MGMT_PORT_NUM_TX_BUFFERS - 1) {
|
|
+ /* No room for another packet */
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return CVMX_MGMT_PORT_NO_MEMORY;
|
|
+ } else {
|
|
+ /* Copy the packet into the output buffer */
|
|
+ memcpy(state->tx_buffers[state->tx_write_index], buffer,
|
|
+ packet_len);
|
|
+ /* Insert the source MAC */
|
|
+ memcpy(state->tx_buffers[state->tx_write_index] + 6,
|
|
+ ((char *)&state->mac) + 2, 6);
|
|
+ /* Update the TX ring buffer entry size */
|
|
+ state->tx_ring[state->tx_write_index].s.len = packet_len;
|
|
+ /* Increment our TX index */
|
|
+ state->tx_write_index =
|
|
+ (state->tx_write_index + 1) % CVMX_MGMT_PORT_NUM_TX_BUFFERS;
|
|
+ /* Ring the doorbell, send ing the packet */
|
|
+ CVMX_SYNCWS;
|
|
+ cvmx_write_csr(CVMX_MIXX_ORING2(port), 1);
|
|
+ if (cvmx_read_csr(CVMX_MIXX_ORCNT(port)))
|
|
+ cvmx_write_csr(CVMX_MIXX_ORCNT(port),
|
|
+ cvmx_read_csr(CVMX_MIXX_ORCNT(port)));
|
|
+
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+ }
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Receive a packet from the management port.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @buffer_len: Size of the buffer to receive the packet into
|
|
+ * @buffer: Buffer to receive the packet into
|
|
+ *
|
|
+ * Returns The size of the packet, or a negative erorr code on failure. Zero
|
|
+ * means that no packets were available.
|
|
+ */
|
|
+int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer)
|
|
+{
|
|
+ union cvmx_mixx_ircnt mix_ircnt;
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ int result;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ /* Max sure the buffer size is valid */
|
|
+ if (buffer_len < 1)
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ if (buffer == NULL)
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ /* Find out how many RX packets are pending */
|
|
+ mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port));
|
|
+ if (mix_ircnt.s.ircnt) {
|
|
+ void *source = state->rx_buffers[state->rx_read_index];
|
|
+ uint64_t *zero_check = source;
|
|
+ /*
|
|
+ * CN56XX pass 1 has an errata where packets might
|
|
+ * start 8 bytes into the buffer instead of at their
|
|
+ * correct location. If the first 8 bytes is zero we
|
|
+ * assume this has happened.
|
|
+ */
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
|
|
+ && (*zero_check == 0))
|
|
+ source += 8;
|
|
+ /* Start off with zero bytes received */
|
|
+ result = 0;
|
|
+ /*
|
|
+ * While the completion code signals more data, copy
|
|
+ * the buffers into the user's data.
|
|
+ */
|
|
+ while (state->rx_ring[state->rx_read_index].s.code == 16) {
|
|
+ /* Only copy what will fit in the user's buffer */
|
|
+ int length = state->rx_ring[state->rx_read_index].s.len;
|
|
+ if (length > buffer_len)
|
|
+ length = buffer_len;
|
|
+ memcpy(buffer, source, length);
|
|
+ /*
|
|
+ * Reduce the size of the buffer to the
|
|
+ * remaining space. If we run out we will
|
|
+ * signal an error when the code 15 buffer
|
|
+ * doesn't fit.
|
|
+ */
|
|
+ buffer += length;
|
|
+ buffer_len -= length;
|
|
+ result += length;
|
|
+ /*
|
|
+ * Update this buffer for reuse in future
|
|
+ * receives. This size is -8 due to an errata
|
|
+ * for CN56XX pass 1.
|
|
+ */
|
|
+ state->rx_ring[state->rx_read_index].s.code = 0;
|
|
+ state->rx_ring[state->rx_read_index].s.len =
|
|
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
|
|
+ state->rx_read_index =
|
|
+ (state->rx_read_index +
|
|
+ 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS;
|
|
+ /*
|
|
+ * Zero the beginning of the buffer for use by
|
|
+ * the errata check.
|
|
+ */
|
|
+ *zero_check = 0;
|
|
+ CVMX_SYNCWS;
|
|
+ /* Increment the number of RX buffers */
|
|
+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1);
|
|
+ source = state->rx_buffers[state->rx_read_index];
|
|
+ zero_check = source;
|
|
+ }
|
|
+
|
|
+ /* Check for the final good completion code */
|
|
+ if (state->rx_ring[state->rx_read_index].s.code == 15) {
|
|
+ if (buffer_len >=
|
|
+ state->rx_ring[state->rx_read_index].s.len) {
|
|
+ int length =
|
|
+ state->rx_ring[state->rx_read_index].s.len;
|
|
+ memcpy(buffer, source, length);
|
|
+ result += length;
|
|
+ } else {
|
|
+ /* Not enough room for the packet */
|
|
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: "
|
|
+ "Packet (%d) larger than "
|
|
+ "supplied buffer (%d)\n",
|
|
+ state->rx_ring[state->rx_read_index].s.len,
|
|
+ buffer_len);
|
|
+ result = CVMX_MGMT_PORT_NO_MEMORY;
|
|
+ }
|
|
+ } else {
|
|
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
|
|
+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: Receive "
|
|
+ "error code %d. Packet dropped(Len %d)\n",
|
|
+ state->rx_ring[state->rx_read_index].s.code,
|
|
+ state->rx_ring[state->rx_read_index].s.len +
|
|
+ result);
|
|
+ result = -state->rx_ring[state->rx_read_index].s.code;
|
|
+
|
|
+ /* Check to see if we need to change the duplex. */
|
|
+ agl_gmx_prtx.u64 =
|
|
+ cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
|
|
+ if (cvmx_mgmt_port_get_link(port) < 0)
|
|
+ agl_gmx_prtx.s.duplex = 0;
|
|
+ else
|
|
+ agl_gmx_prtx.s.duplex = 1;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port),
|
|
+ agl_gmx_prtx.u64);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Clean out the ring buffer entry. This size is -8
|
|
+ * due to an errata for CN56XX pass 1.
|
|
+ */
|
|
+ state->rx_ring[state->rx_read_index].s.code = 0;
|
|
+ state->rx_ring[state->rx_read_index].s.len =
|
|
+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8;
|
|
+ state->rx_read_index =
|
|
+ (state->rx_read_index + 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS;
|
|
+ /*
|
|
+ * Zero the beginning of the buffer for use by the
|
|
+ * errata check.
|
|
+ */
|
|
+ *zero_check = 0;
|
|
+ CVMX_SYNCWS;
|
|
+ /* Increment the number of RX buffers */
|
|
+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1);
|
|
+ /* Decrement the pending RX count */
|
|
+ cvmx_write_csr(CVMX_MIXX_IRCNT(port), 1);
|
|
+ } else {
|
|
+ /* No packets available */
|
|
+ result = 0;
|
|
+ }
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return result;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Get the management port link status:
|
|
+ * 100 = 100Mbps, full duplex
|
|
+ * 10 = 10Mbps, full duplex
|
|
+ * 0 = Link down
|
|
+ * -10 = 10Mpbs, half duplex
|
|
+ * -100 = 100Mbps, half duplex
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns
|
|
+ */
|
|
+int cvmx_mgmt_port_get_link(int port)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ int phy_status;
|
|
+ int duplex;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ /* Assume 100Mbps if we don't know the PHY address */
|
|
+ if (state->phy_id == -1)
|
|
+ return 100;
|
|
+
|
|
+ /* Read the PHY state */
|
|
+ phy_status =
|
|
+ cvmx_mdio_read(state->phy_id >> 8, state->phy_id & 0xff, 17);
|
|
+
|
|
+ /* Only return a link if the PHY has finished auto negotiation
|
|
+ and set the resolved bit (bit 11) */
|
|
+ if (!(phy_status & (1 << 11)))
|
|
+ return 0;
|
|
+
|
|
+ /* Create multiple factor to represent duplex */
|
|
+ if ((phy_status >> 13) & 1)
|
|
+ duplex = 1;
|
|
+ else
|
|
+ duplex = -1;
|
|
+
|
|
+ /* Speed is encoded on bits 15-14 */
|
|
+ switch ((phy_status >> 14) & 3) {
|
|
+ case 0: /* 10 Mbps */
|
|
+ return 10 * duplex;
|
|
+ case 1: /* 100 Mbps */
|
|
+ return 100 * duplex;
|
|
+ default:
|
|
+ return 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Set the MAC address for a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @mac: New MAC address. The lower 6 bytes are used.
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port, uint64_t mac)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ agl_gmx_rxx_adr_ctl.u64 = 0;
|
|
+ /* Only accept matching MAC addresses */
|
|
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1;
|
|
+ /* Drop multicast */
|
|
+ agl_gmx_rxx_adr_ctl.s.mcst = 0;
|
|
+ /* Allow broadcast */
|
|
+ agl_gmx_rxx_adr_ctl.s.bcst = 1;
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64);
|
|
+
|
|
+ /* Only using one of the CAMs */
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), (mac >> 40) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), (mac >> 32) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), (mac >> 24) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), (mac >> 16) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), (mac >> 8) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), (mac >> 0) & 0xff);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1);
|
|
+ state->mac = mac;
|
|
+
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+ return CVMX_MGMT_PORT_SUCCESS;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Get the MAC address for a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns MAC address
|
|
+ */
|
|
+uint64_t cvmx_mgmt_port_get_mac(int port)
|
|
+{
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return CVMX_MGMT_PORT_INVALID_PARAM;
|
|
+
|
|
+ return cvmx_mgmt_port_state_ptr[port].mac;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Set the multicast list.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @flags: Interface flags
|
|
+ *
|
|
+ * Returns
|
|
+ */
|
|
+void cvmx_mgmt_port_set_multicast_list(int port, int flags)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+
|
|
+ agl_gmx_rxx_adr_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port));
|
|
+
|
|
+ /* Allow broadcast MAC addresses */
|
|
+ if (!agl_gmx_rxx_adr_ctl.s.bcst)
|
|
+ agl_gmx_rxx_adr_ctl.s.bcst = 1;
|
|
+
|
|
+ if ((flags & CVMX_IFF_ALLMULTI) || (flags & CVMX_IFF_PROMISC))
|
|
+ /* Force accept multicast packets */
|
|
+ agl_gmx_rxx_adr_ctl.s.mcst = 2;
|
|
+ else
|
|
+ /* Force reject multicast packets */
|
|
+ agl_gmx_rxx_adr_ctl.s.mcst = 1;
|
|
+
|
|
+ if (flags & CVMX_IFF_PROMISC)
|
|
+ /*
|
|
+ * Reject matches if promisc. Since CAM is shut off,
|
|
+ * should accept everything.
|
|
+ */
|
|
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 0;
|
|
+ else
|
|
+ /* Filter packets based on the CAM */
|
|
+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1;
|
|
+
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64);
|
|
+
|
|
+ if (flags & CVMX_IFF_PROMISC)
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 0);
|
|
+ else
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1);
|
|
+
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Set the maximum packet allowed in. Size is specified
|
|
+ * including L2 but without FCS. A normal MTU would corespond
|
|
+ * to 1514 assuming the standard 14 byte L2 header.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @size_without_fcs:
|
|
+ * Size in bytes without FCS
|
|
+ */
|
|
+void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs)
|
|
+{
|
|
+ struct cvmx_mgmt_port_state *state;
|
|
+
|
|
+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports()))
|
|
+ return;
|
|
+
|
|
+ state = cvmx_mgmt_port_state_ptr + port;
|
|
+
|
|
+ cvmx_spinlock_lock(&state->lock);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port),
|
|
+ (size_without_fcs + 7) & 0xfff8);
|
|
+ cvmx_spinlock_unlock(&state->lock);
|
|
+}
|
|
--- /dev/null
|
|
+++ b/drivers/net/octeon/cvmx-mgmt-port.h
|
|
@@ -0,0 +1,168 @@
|
|
+/***********************license start***************
|
|
+ * Author: Cavium Networks
|
|
+ *
|
|
+ * Contact: support@caviumnetworks.com
|
|
+ * This file is part of the OCTEON SDK
|
|
+ *
|
|
+ * Copyright (c) 2003-2008 Cavium Networks
|
|
+ *
|
|
+ * This file is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, Version 2, as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful, but
|
|
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
|
|
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
+ * NONINFRINGEMENT. See the GNU General Public License for more
|
|
+ * details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this file; if not, write to the Free Software
|
|
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
+ * or visit http://www.gnu.org/licenses/.
|
|
+ *
|
|
+ * This file may also be available under a different license from Cavium.
|
|
+ * Contact Cavium Networks for more information
|
|
+ ***********************license end**************************************/
|
|
+
|
|
+/**
|
|
+ *
|
|
+ * Support functions for managing the MII management port
|
|
+ *
|
|
+ */
|
|
+
|
|
+#ifndef __CVMX_MGMT_PORT_H__
|
|
+#define __CVMX_MGMT_PORT_H__
|
|
+
|
|
+enum cvmx_mgmt_port_result {
|
|
+ CVMX_MGMT_PORT_SUCCESS = 0,
|
|
+ CVMX_MGMT_PORT_NO_MEMORY = -1,
|
|
+ CVMX_MGMT_PORT_INVALID_PARAM = -2,
|
|
+};
|
|
+
|
|
+/* Enumeration of Net Device interface flags. */
|
|
+enum cvmx_mgmt_port_netdevice_flags {
|
|
+ CVMX_IFF_PROMISC = 0x100, /* receive all packets */
|
|
+ CVMX_IFF_ALLMULTI = 0x200, /* receive all multicast packets */
|
|
+};
|
|
+
|
|
+/**
|
|
+ * Called to initialize a management port for use. Multiple calls
|
|
+ * to this function accross applications is safe.
|
|
+ *
|
|
+ * @port: Port to initialize
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port);
|
|
+
|
|
+/**
|
|
+ * Shutdown a management port. This currently disables packet IO
|
|
+ * but leaves all hardware and buffers. Another application can then
|
|
+ * call initialize() without redoing the hardware setup.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port);
|
|
+
|
|
+/**
|
|
+ * Enable packet IO on a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port);
|
|
+
|
|
+/**
|
|
+ * Disable packet IO on a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port);
|
|
+
|
|
+/**
|
|
+ * Send a packet out the management port. The packet is copied so
|
|
+ * the input buffer isn't used after this call.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @packet_len: Length of the packet to send. It does not include the final CRC
|
|
+ * @buffer: Packet data
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len,
|
|
+ void *buffer);
|
|
+
|
|
+/**
|
|
+ * Receive a packet from the management port.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @buffer_len: Size of the buffer to receive the packet into
|
|
+ * @buffer: Buffer to receive the packet into
|
|
+ *
|
|
+ * Returns The size of the packet, or a negative erorr code on failure. Zero
|
|
+ * means that no packets were available.
|
|
+ */
|
|
+extern int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer);
|
|
+
|
|
+/**
|
|
+ * Get the management port link status:
|
|
+ * 100 = 100Mbps, full duplex
|
|
+ * 10 = 10Mbps, full duplex
|
|
+ * 0 = Link down
|
|
+ * -10 = 10Mpbs, half duplex
|
|
+ * -100 = 100Mbps, half duplex
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns
|
|
+ */
|
|
+extern int cvmx_mgmt_port_get_link(int port);
|
|
+
|
|
+/**
|
|
+ * Set the MAC address for a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @mac: New MAC address. The lower 6 bytes are used.
|
|
+ *
|
|
+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code
|
|
+ */
|
|
+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port,
|
|
+ uint64_t mac);
|
|
+
|
|
+/**
|
|
+ * Get the MAC address for a management port
|
|
+ *
|
|
+ * @port: Management port
|
|
+ *
|
|
+ * Returns MAC address
|
|
+ */
|
|
+extern uint64_t cvmx_mgmt_port_get_mac(int port);
|
|
+
|
|
+/**
|
|
+ * Set the multicast list.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @flags: Interface flags
|
|
+ *
|
|
+ * Returns
|
|
+ */
|
|
+extern void cvmx_mgmt_port_set_multicast_list(int port, int flags);
|
|
+
|
|
+/**
|
|
+ * Set the maximum packet allowed in. Size is specified
|
|
+ * including L2 but without FCS. A normal MTU would corespond
|
|
+ * to 1514 assuming the standard 14 byte L2 header.
|
|
+ *
|
|
+ * @port: Management port
|
|
+ * @size_without_crc:
|
|
+ * Size in bytes without FCS
|
|
+ */
|
|
+extern void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs);
|
|
+
|
|
+#endif /* __CVMX_MGMT_PORT_H__ */
|
|
--- /dev/null
|
|
+++ b/drivers/net/octeon/octeon-mgmt-port.c
|
|
@@ -0,0 +1,389 @@
|
|
+/*
|
|
+ * Octeon Management Port Ethernet Driver
|
|
+ *
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ *
|
|
+ * Copyright (C) 2007, 2008 Cavium Networks
|
|
+ */
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/netdevice.h>
|
|
+#include <linux/etherdevice.h>
|
|
+#include <linux/ip.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/octeon/octeon.h>
|
|
+#include <asm/octeon/cvmx-mixx-defs.h>
|
|
+#include <asm/octeon/cvmx-agl-defs.h>
|
|
+
|
|
+#include "cvmx-mgmt-port.h"
|
|
+
|
|
+static struct net_device *global_dev[2] = { NULL, NULL };
|
|
+
|
|
+#define DEBUGPRINT(format, ...) do {if (printk_ratelimit()) \
|
|
+ printk(format, ##__VA_ARGS__); \
|
|
+ } while (0)
|
|
+
|
|
+/**
|
|
+ * This is the definition of the Ethernet driver's private
|
|
+ * driver state stored in dev->priv.
|
|
+ */
|
|
+struct device_private {
|
|
+ int port;
|
|
+ struct net_device_stats stats; /* Device statistics */
|
|
+};
|
|
+
|
|
+
|
|
+/**
|
|
+ * Packet transmit
|
|
+ *
|
|
+ * @param skb Packet to send
|
|
+ * @param dev Device info structure
|
|
+ * @return Always returns zero
|
|
+ */
|
|
+static int packet_transmit(struct sk_buff *skb, struct net_device *dev)
|
|
+{
|
|
+ uint64_t flags;
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ enum cvmx_mgmt_port_result result;
|
|
+ local_irq_save(flags);
|
|
+ result = cvmx_mgmt_port_send(priv->port, skb->len, skb->data);
|
|
+ local_irq_restore(flags);
|
|
+ if (result == CVMX_MGMT_PORT_SUCCESS) {
|
|
+ priv->stats.tx_packets++;
|
|
+ priv->stats.tx_bytes += skb->len;
|
|
+ } else {
|
|
+ /* DEBUGPRINT("ERROR: cvmx_mgmt_port_send() failed with %d\n",
|
|
+ result);
|
|
+ */
|
|
+ priv->stats.tx_dropped++;
|
|
+ }
|
|
+ dev_kfree_skb(skb);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * Interrupt handler. The interrupt occurs whenever the POW
|
|
+ * transitions from 0->1 packets in our group.
|
|
+ *
|
|
+ * @param cpl
|
|
+ * @param dev_id
|
|
+ * @param regs
|
|
+ * @return
|
|
+ */
|
|
+static irqreturn_t do_interrupt(int cpl, void *dev_id)
|
|
+{
|
|
+ uint64_t flags;
|
|
+ struct sk_buff *skb;
|
|
+ int result;
|
|
+ char packet[2048];
|
|
+ struct net_device *dev = (struct net_device *) dev_id;
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+
|
|
+ do {
|
|
+ local_irq_save(flags);
|
|
+ result = cvmx_mgmt_port_receive(priv->port, sizeof(packet),
|
|
+ packet);
|
|
+ local_irq_restore(flags);
|
|
+
|
|
+ /* Silently drop packets if we aren't up */
|
|
+ if ((dev->flags & IFF_UP) == 0)
|
|
+ continue;
|
|
+
|
|
+ if (result > 0) {
|
|
+ skb = dev_alloc_skb(result);
|
|
+ if (skb) {
|
|
+ memcpy(skb_put(skb, result), packet, result);
|
|
+ skb->protocol = eth_type_trans(skb, dev);
|
|
+ skb->dev = dev;
|
|
+ skb->ip_summed = CHECKSUM_NONE;
|
|
+ priv->stats.rx_bytes += skb->len;
|
|
+ priv->stats.rx_packets++;
|
|
+ netif_rx(skb);
|
|
+ } else {
|
|
+ DEBUGPRINT("%s: Failed to allocate skbuff, "
|
|
+ "packet dropped\n",
|
|
+ dev->name);
|
|
+ priv->stats.rx_dropped++;
|
|
+ }
|
|
+ } else if (result < 0) {
|
|
+ DEBUGPRINT("%s: Receive error code %d, packet "
|
|
+ "dropped\n",
|
|
+ dev->name, result);
|
|
+ priv->stats.rx_errors++;
|
|
+ }
|
|
+ } while (result != 0);
|
|
+
|
|
+ /* Clear any pending interrupts */
|
|
+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port),
|
|
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port)));
|
|
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port));
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+
|
|
+#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
+/**
|
|
+ * This is called when the kernel needs to manually poll the
|
|
+ * device. For Octeon, this is simply calling the interrupt
|
|
+ * handler. We actually poll all the devices, not just the
|
|
+ * one supplied.
|
|
+ *
|
|
+ * @param dev Device to poll. Unused
|
|
+ */
|
|
+static void device_poll_controller(struct net_device *dev)
|
|
+{
|
|
+ do_interrupt(0, dev);
|
|
+}
|
|
+#endif
|
|
+
|
|
+
|
|
+/**
|
|
+ * Open a device for use. Device should be able to send and
|
|
+ * receive packets after this is called.
|
|
+ *
|
|
+ * @param dev Device to bring up
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static int device_open(struct net_device *dev)
|
|
+{
|
|
+ /* Clear the statistics whenever the interface is brought up */
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ memset(&priv->stats, 0, sizeof(priv->stats));
|
|
+ cvmx_mgmt_port_enable(priv->port);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * Stop an ethernet device. No more packets should be
|
|
+ * received from this device.
|
|
+ *
|
|
+ * @param dev Device to bring down
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static int device_close(struct net_device *dev)
|
|
+{
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ cvmx_mgmt_port_disable(priv->port);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * Get the low level ethernet statistics
|
|
+ *
|
|
+ * @param dev Device to get the statistics from
|
|
+ * @return Pointer to the statistics
|
|
+ */
|
|
+static struct net_device_stats *device_get_stats(struct net_device *dev)
|
|
+{
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ return &priv->stats;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Set the multicast list. Currently unimplemented.
|
|
+ *
|
|
+ * @param dev Device to work on
|
|
+ */
|
|
+static void ethernet_mgmt_port_set_multicast_list(struct net_device *dev)
|
|
+{
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ int port = priv->port;
|
|
+ int num_ports;
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
+ num_ports = 2;
|
|
+ else
|
|
+ num_ports = 1;
|
|
+ if (port < num_ports)
|
|
+ cvmx_mgmt_port_set_multicast_list(port, dev->flags);
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Set the hardware MAC address for a management port device
|
|
+ *
|
|
+ * @param dev Device to change the MAC address for
|
|
+ * @param addr Address structure to change it too. MAC address is addr + 2.
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static int ethernet_mgmt_port_set_mac_address(struct net_device *dev,
|
|
+ void *addr)
|
|
+{
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ union cvmx_agl_gmx_prtx_cfg agl_gmx_cfg;
|
|
+ int port = priv->port;
|
|
+ int num_ports;
|
|
+
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
+ num_ports = 2;
|
|
+ else
|
|
+ num_ports = 1;
|
|
+
|
|
+ memcpy(dev->dev_addr, addr + 2, 6);
|
|
+
|
|
+ if (port < num_ports) {
|
|
+ int i;
|
|
+ uint8_t *ptr = addr;
|
|
+ uint64_t mac = 0;
|
|
+ for (i = 0; i < 6; i++)
|
|
+ mac = (mac<<8) | (uint64_t)(ptr[i+2]);
|
|
+
|
|
+ agl_gmx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port));
|
|
+ cvmx_mgmt_port_set_mac(port, mac);
|
|
+ ethernet_mgmt_port_set_multicast_list(dev);
|
|
+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_cfg.u64);
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * Per network device initialization
|
|
+ *
|
|
+ * @param dev Device to initialize
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static int device_init(struct net_device *dev)
|
|
+{
|
|
+ struct device_private *priv = netdev_priv(dev);
|
|
+ uint64_t mac = cvmx_mgmt_port_get_mac(priv->port);
|
|
+
|
|
+ dev->hard_start_xmit = packet_transmit;
|
|
+ dev->get_stats = device_get_stats;
|
|
+ dev->open = device_open;
|
|
+ dev->stop = device_close;
|
|
+#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
+ dev->poll_controller = device_poll_controller;
|
|
+#endif
|
|
+ dev->dev_addr[0] = (mac >> 40) & 0xff;
|
|
+ dev->dev_addr[1] = (mac >> 32) & 0xff;
|
|
+ dev->dev_addr[2] = (mac >> 24) & 0xff;
|
|
+ dev->dev_addr[3] = (mac >> 16) & 0xff;
|
|
+ dev->dev_addr[4] = (mac >> 8) & 0xff;
|
|
+ dev->dev_addr[5] = (mac >> 0) & 0xff;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * Module/ driver initialization. Creates the linux network
|
|
+ * devices.
|
|
+ *
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static int __init ethernet_mgmt_port_init(void)
|
|
+{
|
|
+ struct net_device *dev;
|
|
+ struct device_private *priv;
|
|
+ union cvmx_mixx_irhwm mix_irhwm;
|
|
+ union cvmx_mixx_intena mix_intena;
|
|
+ int num_ports;
|
|
+ int port;
|
|
+
|
|
+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
+ return 0;
|
|
+
|
|
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
+ num_ports = 2;
|
|
+ else
|
|
+ num_ports = 1;
|
|
+
|
|
+ printk("Octeon management port ethernet driver\n");
|
|
+
|
|
+ for (port = 0; port < num_ports; port++) {
|
|
+ if (cvmx_mgmt_port_initialize(port) != CVMX_MGMT_PORT_SUCCESS) {
|
|
+ pr_err("ERROR: cvmx_mgmt_port_initialize(%d) "
|
|
+ "failed\n", port);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* Setup is complete, create the virtual ethernet devices */
|
|
+ dev = alloc_etherdev(sizeof(struct device_private));
|
|
+ if (dev == NULL) {
|
|
+ pr_err("ERROR: Failed to allocate ethernet device\n");
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ dev->init = device_init;
|
|
+ strcpy(dev->name, "mgmt%d");
|
|
+
|
|
+ /* Initialize the device private structure. */
|
|
+ priv = netdev_priv(dev);
|
|
+ memset(priv, 0, sizeof(struct device_private));
|
|
+ priv->port = port;
|
|
+
|
|
+ if (register_netdev(dev) < 0) {
|
|
+ pr_err("ERROR: Failed to register ethernet device\n");
|
|
+ kfree(dev);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* Clear any pending interrupts */
|
|
+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port),
|
|
+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port)));
|
|
+
|
|
+ /* Register an IRQ hander for to receive interrupts */
|
|
+ dev->irq =
|
|
+ (priv->port == 0) ? OCTEON_IRQ_MII0 : OCTEON_IRQ_MII1;
|
|
+ if (request_irq(dev->irq, do_interrupt, IRQF_SHARED, dev->name,
|
|
+ dev))
|
|
+ pr_err("ethernet-mgmt: Failed to assign "
|
|
+ "interrupt %d\n", dev->irq);
|
|
+
|
|
+ /* Interrupt every single RX packet */
|
|
+ mix_irhwm.u64 = 0;
|
|
+ mix_irhwm.s.irhwm = 0;
|
|
+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), mix_irhwm.u64);
|
|
+
|
|
+ /* Enable receive interrupts */
|
|
+ mix_intena.u64 = 0;
|
|
+ mix_intena.s.ithena = 1;
|
|
+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), mix_intena.u64);
|
|
+
|
|
+ global_dev[priv->port] = dev;
|
|
+
|
|
+ dev->set_mac_address = ethernet_mgmt_port_set_mac_address;
|
|
+ dev->set_multicast_list = ethernet_mgmt_port_set_multicast_list;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * Module / driver shutdown
|
|
+ *
|
|
+ * @return Zero on success
|
|
+ */
|
|
+static void __exit ethernet_mgmt_port_cleanup(void)
|
|
+{
|
|
+ int port;
|
|
+ for (port = 0; port < 2; port++) {
|
|
+ if (global_dev[port]) {
|
|
+ struct device_private *priv =
|
|
+ netdev_priv(global_dev[port]);
|
|
+ /* Disable interrupt */
|
|
+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), 0);
|
|
+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), 0);
|
|
+ cvmx_mgmt_port_shutdown(priv->port);
|
|
+
|
|
+ /* Free the interrupt handler */
|
|
+ free_irq(global_dev[port]->irq, global_dev[port]);
|
|
+
|
|
+ /* Free the ethernet devices */
|
|
+ unregister_netdev(global_dev[port]);
|
|
+ kfree(global_dev[port]);
|
|
+ global_dev[port] = NULL;
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
|
|
+MODULE_DESCRIPTION("Cavium Networks Octeon management port ethernet driver.");
|
|
+module_init(ethernet_mgmt_port_init);
|
|
+module_exit(ethernet_mgmt_port_cleanup);
|