mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-19 16:50:37 +02:00
631f7403d8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7689 3c298f89-4303-0410-b956-a3cf2f4a3e73
403 lines
9.1 KiB
C
403 lines
9.1 KiB
C
/*
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006, 2007 OpenWrt.org
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/ar7/vlynq.h>
|
|
|
|
#define VLYNQ_PCI_SLOTS 2
|
|
|
|
struct vlynq_reg_config {
|
|
u32 offset;
|
|
u32 value;
|
|
};
|
|
|
|
struct vlynq_pci_config {
|
|
u32 chip_id;
|
|
char name[32];
|
|
struct vlynq_mapping rx_mapping[4];
|
|
int irq;
|
|
int irq_type;
|
|
u32 chip;
|
|
u32 class;
|
|
int num_regs;
|
|
struct vlynq_reg_config regs[10];
|
|
};
|
|
|
|
struct vlynq_pci_private {
|
|
u32 latency;
|
|
u32 cache_line;
|
|
u32 command;
|
|
u32 sz_mask;
|
|
struct vlynq_pci_config *config;
|
|
};
|
|
|
|
static struct vlynq_pci_config known_devices[] = {
|
|
{
|
|
.chip_id = 0x00000009, .name = "TI ACX111",
|
|
.rx_mapping = {
|
|
{ .size = 0x22000, .offset = 0xf0000000 },
|
|
{ .size = 0x40000, .offset = 0xc0000000 },
|
|
{ .size = 0x0, .offset = 0x0 },
|
|
{ .size = 0x0, .offset = 0x0 },
|
|
},
|
|
.irq = 0, .chip = 0x9066104c,
|
|
.irq_type = IRQ_TYPE_EDGE_RISING,
|
|
.class = PCI_CLASS_NETWORK_OTHER,
|
|
.num_regs = 5,
|
|
.regs = {
|
|
{ .offset = 0x790, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
|
|
{ .offset = 0x794, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
|
|
{ .offset = 0x740, .value = 0 },
|
|
{ .offset = 0x744, .value = 0x00010000 },
|
|
{ .offset = 0x764, .value = 0x00010000 },
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, };
|
|
|
|
static struct resource vlynq_io_resource = {
|
|
.start = 0x00000000,
|
|
.end = 0x00000000,
|
|
.name = "pci IO space",
|
|
.flags = IORESOURCE_IO
|
|
};
|
|
|
|
static struct resource vlynq_mem_resource = {
|
|
.start = 0x00000000,
|
|
.end = 0x00000000,
|
|
.name = "pci memory space",
|
|
.flags = IORESOURCE_MEM
|
|
};
|
|
|
|
static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res)
|
|
{
|
|
int i;
|
|
struct vlynq_pci_private *priv = dev->priv;
|
|
u32 ret = dev->mem_start;
|
|
if (!priv->config->rx_mapping[res].size) return 0;
|
|
for (i = 0; i < res; i++)
|
|
ret += priv->config->rx_mapping[i].size;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline u32 vlynq_read(u32 val, int size) {
|
|
switch (size) {
|
|
case 1:
|
|
return *(u8 *)&val;
|
|
case 2:
|
|
return *(u16 *)&val;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
|
|
{
|
|
struct vlynq_device *dev;
|
|
struct vlynq_pci_private *priv;
|
|
int resno, slot = PCI_SLOT(devfn);
|
|
|
|
if ((size == 2) && (where & 1))
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
else if ((size == 4) && (where & 3))
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
if (slot >= VLYNQ_PCI_SLOTS)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
dev = slots[slot];
|
|
|
|
if (!dev || (PCI_FUNC(devfn) > 0))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
priv = dev->priv;
|
|
|
|
switch (where) {
|
|
case PCI_VENDOR_ID:
|
|
*val = vlynq_read(priv->config->chip, size);
|
|
break;
|
|
case PCI_DEVICE_ID:
|
|
*val = priv->config->chip & 0xffff;
|
|
case PCI_COMMAND:
|
|
*val = priv->command;
|
|
case PCI_STATUS:
|
|
/* *val = PCI_STATUS_CAP_LIST;*/
|
|
*val = 0;
|
|
break;
|
|
case PCI_CLASS_REVISION:
|
|
*val = priv->config->class;
|
|
break;
|
|
case PCI_LATENCY_TIMER:
|
|
*val = priv->latency;
|
|
break;
|
|
case PCI_HEADER_TYPE:
|
|
*val = PCI_HEADER_TYPE_NORMAL;
|
|
break;
|
|
case PCI_CACHE_LINE_SIZE:
|
|
*val = priv->cache_line;
|
|
break;
|
|
case PCI_BASE_ADDRESS_0:
|
|
case PCI_BASE_ADDRESS_1:
|
|
case PCI_BASE_ADDRESS_2:
|
|
case PCI_BASE_ADDRESS_3:
|
|
resno = (where - PCI_BASE_ADDRESS_0) >> 2;
|
|
if (priv->sz_mask & (1 << resno)) {
|
|
priv->sz_mask &= ~(1 << resno);
|
|
*val = priv->config->rx_mapping[resno].size;
|
|
} else {
|
|
*val = vlynq_get_mapped(dev, resno);
|
|
}
|
|
break;
|
|
case PCI_BASE_ADDRESS_4:
|
|
case PCI_BASE_ADDRESS_5:
|
|
case PCI_SUBSYSTEM_VENDOR_ID:
|
|
case PCI_SUBSYSTEM_ID:
|
|
case PCI_ROM_ADDRESS:
|
|
case PCI_INTERRUPT_LINE:
|
|
case PCI_CARDBUS_CIS:
|
|
case PCI_CAPABILITY_LIST:
|
|
*val = 0;
|
|
break;
|
|
case PCI_INTERRUPT_PIN:
|
|
*val = 1;
|
|
break;
|
|
default:
|
|
printk("%s: Read of unknown register 0x%x (size %d)\n",
|
|
dev->dev.bus_id, where, size);
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
|
|
{
|
|
struct vlynq_device *dev;
|
|
struct vlynq_pci_private *priv;
|
|
int resno, slot = PCI_SLOT(devfn);
|
|
|
|
if ((size == 2) && (where & 1))
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
else if ((size == 4) && (where & 3))
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
if (slot >= VLYNQ_PCI_SLOTS)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
dev = slots[slot];
|
|
|
|
if (!dev || (PCI_FUNC(devfn) > 0))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
priv = dev->priv;
|
|
|
|
switch (where) {
|
|
case PCI_VENDOR_ID:
|
|
case PCI_DEVICE_ID:
|
|
case PCI_STATUS:
|
|
case PCI_CLASS_REVISION:
|
|
case PCI_HEADER_TYPE:
|
|
case PCI_CACHE_LINE_SIZE:
|
|
case PCI_SUBSYSTEM_VENDOR_ID:
|
|
case PCI_SUBSYSTEM_ID:
|
|
case PCI_INTERRUPT_LINE:
|
|
case PCI_INTERRUPT_PIN:
|
|
case PCI_CARDBUS_CIS:
|
|
case PCI_CAPABILITY_LIST:
|
|
return PCIBIOS_FUNC_NOT_SUPPORTED;
|
|
case PCI_COMMAND:
|
|
priv->command = val;
|
|
case PCI_LATENCY_TIMER:
|
|
priv->latency = val;
|
|
break;
|
|
case PCI_BASE_ADDRESS_0:
|
|
case PCI_BASE_ADDRESS_1:
|
|
case PCI_BASE_ADDRESS_2:
|
|
case PCI_BASE_ADDRESS_3:
|
|
if (val == 0xffffffff) {
|
|
resno = (where - PCI_BASE_ADDRESS_0) >> 2;
|
|
priv->sz_mask |= (1 << resno);
|
|
break;
|
|
}
|
|
case PCI_BASE_ADDRESS_4:
|
|
case PCI_BASE_ADDRESS_5:
|
|
case PCI_ROM_ADDRESS:
|
|
break;
|
|
default:
|
|
printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n",
|
|
dev->dev.bus_id, where, size, val);
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops vlynq_pci_ops = {
|
|
vlynq_config_read,
|
|
vlynq_config_write
|
|
};
|
|
|
|
static struct pci_controller vlynq_controller = {
|
|
.pci_ops = &vlynq_pci_ops,
|
|
.io_resource = &vlynq_io_resource,
|
|
.mem_resource = &vlynq_mem_resource,
|
|
};
|
|
|
|
static int vlynq_pci_probe(struct vlynq_device *dev)
|
|
{
|
|
int result, i;
|
|
u32 chip_id, addr;
|
|
struct vlynq_pci_private *priv;
|
|
struct vlynq_mapping mapping[4] = { { 0, }, };
|
|
struct vlynq_pci_config *config = NULL;
|
|
|
|
result = vlynq_set_local_irq(dev, 31);
|
|
if (result)
|
|
return result;
|
|
|
|
result = vlynq_set_remote_irq(dev, 30);
|
|
if (result)
|
|
return result;
|
|
|
|
result = vlynq_device_enable(dev);
|
|
if (result)
|
|
return result;
|
|
|
|
chip_id = vlynq_remote_id(dev);
|
|
for (i = 0; i < ARRAY_SIZE(known_devices); i++)
|
|
if (chip_id == known_devices[i].chip_id)
|
|
config = &known_devices[i];
|
|
|
|
if (!config) {
|
|
printk("vlynq-pci: skipping unknown device "
|
|
"%04x:%04x at %s\n", chip_id >> 16,
|
|
chip_id & 0xffff, dev->dev.bus_id);
|
|
result = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
printk("vlynq-pci: attaching device %s at %s\n",
|
|
config->name, dev->dev.bus_id);
|
|
|
|
priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL);
|
|
if (!priv) {
|
|
printk(KERN_ERR "%s: failed to allocate private data\n",
|
|
dev->dev.bus_id);
|
|
result = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
memset(priv, 0, sizeof(struct vlynq_pci_private));
|
|
priv->latency = 64;
|
|
priv->cache_line = 32;
|
|
priv->config = config;
|
|
|
|
mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
|
|
mapping[0].size = 0x02000000;
|
|
vlynq_set_local_mapping(dev, dev->mem_start, mapping);
|
|
vlynq_set_remote_mapping(dev, 0, config->rx_mapping);
|
|
|
|
set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type);
|
|
|
|
addr = (u32)ioremap_nocache(dev->mem_start, 0x10000);
|
|
if (!addr) {
|
|
printk(KERN_ERR "%s: failed to remap io memory\n",
|
|
dev->dev.bus_id);
|
|
result = -ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < config->num_regs; i++)
|
|
*(volatile u32 *)(addr + config->regs[i].offset) =
|
|
config->regs[i].value;
|
|
|
|
dev->priv = priv;
|
|
for (i = 0; i < VLYNQ_PCI_SLOTS; i++) {
|
|
if (!slots[i]) {
|
|
slots[i] = dev;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
vlynq_device_disable(dev);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int vlynq_pci_remove(struct vlynq_device *dev)
|
|
{
|
|
int i;
|
|
struct vlynq_pci_private *priv = dev->priv;
|
|
|
|
for (i = 0; i < VLYNQ_PCI_SLOTS; i++)
|
|
if (slots[i] == dev)
|
|
slots[i] = NULL;
|
|
|
|
vlynq_device_disable(dev);
|
|
kfree(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct vlynq_driver vlynq_pci = {
|
|
.name = "PCI over VLYNQ emulation",
|
|
.probe = vlynq_pci_probe,
|
|
.remove = vlynq_pci_remove,
|
|
};
|
|
|
|
int vlynq_pci_init(void)
|
|
{
|
|
int res;
|
|
res = vlynq_register_driver(&vlynq_pci);
|
|
if (res)
|
|
return res;
|
|
|
|
register_pci_controller(&vlynq_controller);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin)
|
|
{
|
|
struct vlynq_device *dev;
|
|
struct vlynq_pci_private *priv;
|
|
|
|
dev = slots[slot];
|
|
|
|
if (!dev)
|
|
return 0;
|
|
|
|
priv = dev->priv;
|
|
|
|
return vlynq_virq_to_irq(dev, priv->config->irq);
|
|
}
|
|
|
|
/* Do platform specific device initialization at pci_enable_device() time */
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|