mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-19 10:55:31 +03:00
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27747 3c298f89-4303-0410-b956-a3cf2f4a3e73
1627 lines
44 KiB
Diff
1627 lines
44 KiB
Diff
--- a/drivers/net/Kconfig
|
|
+++ b/drivers/net/Kconfig
|
|
@@ -251,6 +251,12 @@ config AX88796_93CX6
|
|
help
|
|
Select this if your platform comes with an external 93CX6 eeprom.
|
|
|
|
+config AR231X_ETHERNET
|
|
+ tristate "AR231x Ethernet support"
|
|
+ depends on ATHEROS_AR231X
|
|
+ help
|
|
+ Support for the AR231x/531x ethernet controller
|
|
+
|
|
config MACE
|
|
tristate "MACE (Power Mac ethernet) support"
|
|
depends on PPC_PMAC && PPC32
|
|
--- a/drivers/net/Makefile
|
|
+++ b/drivers/net/Makefile
|
|
@@ -224,6 +224,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
|
|
obj-$(CONFIG_KORINA) += korina.o
|
|
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
|
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
|
+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
|
|
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
|
|
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
|
obj-$(CONFIG_DECLANCE) += declance.o
|
|
--- /dev/null
|
|
+++ b/drivers/net/ar231x.c
|
|
@@ -0,0 +1,1293 @@
|
|
+/*
|
|
+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
|
|
+ *
|
|
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
|
|
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
|
|
+ *
|
|
+ * Thanks to Atheros for providing hardware and documentation
|
|
+ * enabling me to write this driver.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * Additional credits:
|
|
+ * This code is taken from John Taylor's Sibyte driver and then
|
|
+ * modified for the AR2313.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/version.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/netdevice.h>
|
|
+#include <linux/etherdevice.h>
|
|
+#include <linux/skbuff.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/highmem.h>
|
|
+#include <linux/sockios.h>
|
|
+#include <linux/pkt_sched.h>
|
|
+#include <linux/mii.h>
|
|
+#include <linux/phy.h>
|
|
+#include <linux/ethtool.h>
|
|
+#include <linux/ctype.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <net/sock.h>
|
|
+#include <net/ip.h>
|
|
+
|
|
+#include <asm/system.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/byteorder.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/bootinfo.h>
|
|
+
|
|
+#define AR2313_MTU 1692
|
|
+#define AR2313_PRIOS 1
|
|
+#define AR2313_QUEUES (2*AR2313_PRIOS)
|
|
+#define AR2313_DESCR_ENTRIES 64
|
|
+
|
|
+
|
|
+#ifndef min
|
|
+#define min(a,b) (((a)<(b))?(a):(b))
|
|
+#endif
|
|
+
|
|
+#ifndef SMP_CACHE_BYTES
|
|
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
|
|
+#endif
|
|
+
|
|
+#define AR2313_MBOX_SET_BIT 0x8
|
|
+
|
|
+#include "ar231x.h"
|
|
+
|
|
+/*
|
|
+ * New interrupt handler strategy:
|
|
+ *
|
|
+ * An old interrupt handler worked using the traditional method of
|
|
+ * replacing an skbuff with a new one when a packet arrives. However
|
|
+ * the rx rings do not need to contain a static number of buffer
|
|
+ * descriptors, thus it makes sense to move the memory allocation out
|
|
+ * of the main interrupt handler and do it in a bottom half handler
|
|
+ * and only allocate new buffers when the number of buffers in the
|
|
+ * ring is below a certain threshold. In order to avoid starving the
|
|
+ * NIC under heavy load it is however necessary to force allocation
|
|
+ * when hitting a minimum threshold. The strategy for alloction is as
|
|
+ * follows:
|
|
+ *
|
|
+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
|
|
+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
|
|
+ * the buffers in the interrupt handler
|
|
+ * RX_RING_THRES - maximum number of buffers in the rx ring
|
|
+ *
|
|
+ * One advantagous side effect of this allocation approach is that the
|
|
+ * entire rx processing can be done without holding any spin lock
|
|
+ * since the rx rings and registers are totally independent of the tx
|
|
+ * ring and its registers. This of course includes the kmalloc's of
|
|
+ * new skb's. Thus start_xmit can run in parallel with rx processing
|
|
+ * and the memory allocation on SMP systems.
|
|
+ *
|
|
+ * Note that running the skb reallocation in a bottom half opens up
|
|
+ * another can of races which needs to be handled properly. In
|
|
+ * particular it can happen that the interrupt handler tries to run
|
|
+ * the reallocation while the bottom half is either running on another
|
|
+ * CPU or was interrupted on the same CPU. To get around this the
|
|
+ * driver uses bitops to prevent the reallocation routines from being
|
|
+ * reentered.
|
|
+ *
|
|
+ * TX handling can also be done without holding any spin lock, wheee
|
|
+ * this is fun! since tx_csm is only written to by the interrupt
|
|
+ * handler.
|
|
+ */
|
|
+
|
|
+/*
|
|
+ * Threshold values for RX buffer allocation - the low water marks for
|
|
+ * when to start refilling the rings are set to 75% of the ring
|
|
+ * sizes. It seems to make sense to refill the rings entirely from the
|
|
+ * intrrupt handler once it gets below the panic threshold, that way
|
|
+ * we don't risk that the refilling is moved to another CPU when the
|
|
+ * one running the interrupt handler just got the slab code hot in its
|
|
+ * cache.
|
|
+ */
|
|
+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
|
|
+#define RX_PANIC_THRES (RX_RING_SIZE/4)
|
|
+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
|
|
+#define CRC_LEN 4
|
|
+#define RX_OFFSET 2
|
|
+
|
|
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
+#define VLAN_HDR 4
|
|
+#else
|
|
+#define VLAN_HDR 0
|
|
+#endif
|
|
+
|
|
+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
|
|
+
|
|
+#ifdef MODULE
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
|
|
+MODULE_DESCRIPTION("AR231x Ethernet driver");
|
|
+#endif
|
|
+
|
|
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
|
|
+
|
|
+// prototypes
|
|
+static void ar231x_halt(struct net_device *dev);
|
|
+static void rx_tasklet_func(unsigned long data);
|
|
+static void rx_tasklet_cleanup(struct net_device *dev);
|
|
+static void ar231x_multicast_list(struct net_device *dev);
|
|
+static void ar231x_tx_timeout(struct net_device *dev);
|
|
+
|
|
+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
|
|
+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
|
|
+static int ar231x_mdiobus_reset(struct mii_bus *bus);
|
|
+static int ar231x_mdiobus_probe (struct net_device *dev);
|
|
+static void ar231x_adjust_link(struct net_device *dev);
|
|
+
|
|
+#ifndef ERR
|
|
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
+static void
|
|
+ar231x_netpoll(struct net_device *dev)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+ ar231x_interrupt(dev->irq, dev);
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static const struct net_device_ops ar231x_ops = {
|
|
+ .ndo_open = ar231x_open,
|
|
+ .ndo_stop = ar231x_close,
|
|
+ .ndo_start_xmit = ar231x_start_xmit,
|
|
+ .ndo_set_multicast_list = ar231x_multicast_list,
|
|
+ .ndo_do_ioctl = ar231x_ioctl,
|
|
+ .ndo_change_mtu = eth_change_mtu,
|
|
+ .ndo_validate_addr = eth_validate_addr,
|
|
+ .ndo_set_mac_address = eth_mac_addr,
|
|
+ .ndo_tx_timeout = ar231x_tx_timeout,
|
|
+#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
+ .ndo_poll_controller = ar231x_netpoll,
|
|
+#endif
|
|
+};
|
|
+
|
|
+int __init ar231x_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct net_device *dev;
|
|
+ struct ar231x_private *sp;
|
|
+ struct resource *res;
|
|
+ unsigned long ar_eth_base;
|
|
+ char buf[64];
|
|
+
|
|
+ dev = alloc_etherdev(sizeof(struct ar231x_private));
|
|
+
|
|
+ if (dev == NULL) {
|
|
+ printk(KERN_ERR
|
|
+ "ar231x: Unable to allocate net_device structure!\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ platform_set_drvdata(pdev, dev);
|
|
+
|
|
+ sp = netdev_priv(dev);
|
|
+ sp->dev = dev;
|
|
+ sp->cfg = pdev->dev.platform_data;
|
|
+
|
|
+ sprintf(buf, "eth%d_membase", pdev->id);
|
|
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
|
|
+ if (!res)
|
|
+ return -ENODEV;
|
|
+
|
|
+ sp->link = 0;
|
|
+ ar_eth_base = res->start;
|
|
+
|
|
+ sprintf(buf, "eth%d_irq", pdev->id);
|
|
+ dev->irq = platform_get_irq_byname(pdev, buf);
|
|
+
|
|
+ spin_lock_init(&sp->lock);
|
|
+
|
|
+ dev->features |= NETIF_F_HIGHDMA;
|
|
+ dev->netdev_ops = &ar231x_ops;
|
|
+
|
|
+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
|
|
+ tasklet_disable(&sp->rx_tasklet);
|
|
+
|
|
+ sp->eth_regs =
|
|
+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
|
|
+ if (!sp->eth_regs) {
|
|
+ printk("Can't remap eth registers\n");
|
|
+ return (-ENXIO);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * When there's only one MAC, PHY regs are typically on ENET0,
|
|
+ * even though the MAC might be on ENET1.
|
|
+ * Needto remap PHY regs separately in this case
|
|
+ */
|
|
+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
|
|
+ sp->phy_regs = sp->eth_regs;
|
|
+ else {
|
|
+ sp->phy_regs =
|
|
+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
|
|
+ sizeof(*sp->phy_regs));
|
|
+ if (!sp->phy_regs) {
|
|
+ printk("Can't remap phy registers\n");
|
|
+ return (-ENXIO);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ sp->dma_regs =
|
|
+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
|
|
+ sizeof(*sp->dma_regs));
|
|
+ dev->base_addr = (unsigned int) sp->dma_regs;
|
|
+ if (!sp->dma_regs) {
|
|
+ printk("Can't remap DMA registers\n");
|
|
+ return (-ENXIO);
|
|
+ }
|
|
+
|
|
+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
|
|
+ if (!sp->int_regs) {
|
|
+ printk("Can't remap INTERRUPT registers\n");
|
|
+ return (-ENXIO);
|
|
+ }
|
|
+
|
|
+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
|
|
+ sp->name[sizeof(sp->name) - 1] = '\0';
|
|
+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
|
|
+
|
|
+ if (ar231x_init(dev)) {
|
|
+ /*
|
|
+ * ar231x_init() calls ar231x_init_cleanup() on error.
|
|
+ */
|
|
+ kfree(dev);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ if (register_netdev(dev)) {
|
|
+ printk("%s: register_netdev failed\n", __func__);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
|
|
+ dev->name, sp->name,
|
|
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
|
|
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
|
|
+
|
|
+ sp->mii_bus = mdiobus_alloc();
|
|
+ if (sp->mii_bus == NULL)
|
|
+ return -1;
|
|
+
|
|
+ sp->mii_bus->priv = dev;
|
|
+ sp->mii_bus->read = ar231x_mdiobus_read;
|
|
+ sp->mii_bus->write = ar231x_mdiobus_write;
|
|
+ sp->mii_bus->reset = ar231x_mdiobus_reset;
|
|
+ sp->mii_bus->name = "ar231x_eth_mii";
|
|
+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
|
|
+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
|
|
+ *sp->mii_bus->irq = PHY_POLL;
|
|
+
|
|
+ mdiobus_register(sp->mii_bus);
|
|
+
|
|
+ if (ar231x_mdiobus_probe(dev) != 0) {
|
|
+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
|
|
+ rx_tasklet_cleanup(dev);
|
|
+ ar231x_init_cleanup(dev);
|
|
+ unregister_netdev(dev);
|
|
+ kfree(dev);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* start link poll timer */
|
|
+ ar231x_setup_timer(dev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static void ar231x_multicast_list(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned int filter;
|
|
+
|
|
+ filter = sp->eth_regs->mac_control;
|
|
+
|
|
+ if (dev->flags & IFF_PROMISC)
|
|
+ filter |= MAC_CONTROL_PR;
|
|
+ else
|
|
+ filter &= ~MAC_CONTROL_PR;
|
|
+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
|
|
+ filter |= MAC_CONTROL_PM;
|
|
+ else
|
|
+ filter &= ~MAC_CONTROL_PM;
|
|
+
|
|
+ sp->eth_regs->mac_control = filter;
|
|
+}
|
|
+
|
|
+static void rx_tasklet_cleanup(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+
|
|
+ /*
|
|
+ * Tasklet may be scheduled. Need to get it removed from the list
|
|
+ * since we're about to free the struct.
|
|
+ */
|
|
+
|
|
+ sp->unloading = 1;
|
|
+ tasklet_enable(&sp->rx_tasklet);
|
|
+ tasklet_kill(&sp->rx_tasklet);
|
|
+}
|
|
+
|
|
+static int __devexit ar231x_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct net_device *dev = platform_get_drvdata(pdev);
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ rx_tasklet_cleanup(dev);
|
|
+ ar231x_init_cleanup(dev);
|
|
+ unregister_netdev(dev);
|
|
+ mdiobus_unregister(sp->mii_bus);
|
|
+ mdiobus_free(sp->mii_bus);
|
|
+ kfree(dev);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Restart the AR2313 ethernet controller.
|
|
+ */
|
|
+static int ar231x_restart(struct net_device *dev)
|
|
+{
|
|
+ /* disable interrupts */
|
|
+ disable_irq(dev->irq);
|
|
+
|
|
+ /* stop mac */
|
|
+ ar231x_halt(dev);
|
|
+
|
|
+ /* initialize */
|
|
+ ar231x_init(dev);
|
|
+
|
|
+ /* enable interrupts */
|
|
+ enable_irq(dev->irq);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver ar231x_driver = {
|
|
+ .driver.name = "ar231x-eth",
|
|
+ .probe = ar231x_probe,
|
|
+ .remove = __devexit_p(ar231x_remove),
|
|
+};
|
|
+
|
|
+int __init ar231x_module_init(void)
|
|
+{
|
|
+ return platform_driver_register(&ar231x_driver);
|
|
+}
|
|
+
|
|
+void __exit ar231x_module_cleanup(void)
|
|
+{
|
|
+ platform_driver_unregister(&ar231x_driver);
|
|
+}
|
|
+
|
|
+module_init(ar231x_module_init);
|
|
+module_exit(ar231x_module_cleanup);
|
|
+
|
|
+
|
|
+static void ar231x_free_descriptors(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ if (sp->rx_ring != NULL) {
|
|
+ kfree((void *) KSEG0ADDR(sp->rx_ring));
|
|
+ sp->rx_ring = NULL;
|
|
+ sp->tx_ring = NULL;
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+static int ar231x_allocate_descriptors(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ int size;
|
|
+ int j;
|
|
+ ar231x_descr_t *space;
|
|
+
|
|
+ if (sp->rx_ring != NULL) {
|
|
+ printk("%s: already done.\n", __FUNCTION__);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ size =
|
|
+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
|
|
+ space = kmalloc(size, GFP_KERNEL);
|
|
+ if (space == NULL)
|
|
+ return 1;
|
|
+
|
|
+ /* invalidate caches */
|
|
+ dma_cache_inv((unsigned int) space, size);
|
|
+
|
|
+ /* now convert pointer to KSEG1 */
|
|
+ space = (ar231x_descr_t *) KSEG1ADDR(space);
|
|
+
|
|
+ memset((void *) space, 0, size);
|
|
+
|
|
+ sp->rx_ring = space;
|
|
+ space += AR2313_DESCR_ENTRIES;
|
|
+
|
|
+ sp->tx_ring = space;
|
|
+ space += AR2313_DESCR_ENTRIES;
|
|
+
|
|
+ /* Initialize the transmit Descriptors */
|
|
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
|
|
+ ar231x_descr_t *td = &sp->tx_ring[j];
|
|
+ td->status = 0;
|
|
+ td->devcs = DMA_TX1_CHAINED;
|
|
+ td->addr = 0;
|
|
+ td->descr =
|
|
+ virt_to_phys(&sp->
|
|
+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Generic cleanup handling data allocated during init. Used when the
|
|
+ * module is unloaded or if an error occurs during initialization
|
|
+ */
|
|
+static void ar231x_init_cleanup(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ struct sk_buff *skb;
|
|
+ int j;
|
|
+
|
|
+ ar231x_free_descriptors(dev);
|
|
+
|
|
+ if (sp->eth_regs)
|
|
+ iounmap((void *) sp->eth_regs);
|
|
+ if (sp->dma_regs)
|
|
+ iounmap((void *) sp->dma_regs);
|
|
+
|
|
+ if (sp->rx_skb) {
|
|
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
|
|
+ skb = sp->rx_skb[j];
|
|
+ if (skb) {
|
|
+ sp->rx_skb[j] = NULL;
|
|
+ dev_kfree_skb(skb);
|
|
+ }
|
|
+ }
|
|
+ kfree(sp->rx_skb);
|
|
+ sp->rx_skb = NULL;
|
|
+ }
|
|
+
|
|
+ if (sp->tx_skb) {
|
|
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
|
|
+ skb = sp->tx_skb[j];
|
|
+ if (skb) {
|
|
+ sp->tx_skb[j] = NULL;
|
|
+ dev_kfree_skb(skb);
|
|
+ }
|
|
+ }
|
|
+ kfree(sp->tx_skb);
|
|
+ sp->tx_skb = NULL;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int ar231x_setup_timer(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+
|
|
+ init_timer(&sp->link_timer);
|
|
+
|
|
+ sp->link_timer.function = ar231x_link_timer_fn;
|
|
+ sp->link_timer.data = (int) dev;
|
|
+ sp->link_timer.expires = jiffies + HZ;
|
|
+
|
|
+ add_timer(&sp->link_timer);
|
|
+ return 0;
|
|
+
|
|
+}
|
|
+
|
|
+static void ar231x_link_timer_fn(unsigned long data)
|
|
+{
|
|
+ struct net_device *dev = (struct net_device *) data;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+
|
|
+ // see if the link status changed
|
|
+ // This was needed to make sure we set the PHY to the
|
|
+ // autonegotiated value of half or full duplex.
|
|
+ ar231x_check_link(dev);
|
|
+
|
|
+ // Loop faster when we don't have link.
|
|
+ // This was needed to speed up the AP bootstrap time.
|
|
+ if (sp->link == 0) {
|
|
+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
|
|
+ } else {
|
|
+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void ar231x_check_link(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ u16 phyData;
|
|
+
|
|
+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
|
|
+ if (sp->phyData != phyData) {
|
|
+ if (phyData & BMSR_LSTATUS) {
|
|
+ /* link is present, ready link partner ability to deterine
|
|
+ duplexity */
|
|
+ int duplex = 0;
|
|
+ u16 reg;
|
|
+
|
|
+ sp->link = 1;
|
|
+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
|
|
+ if (reg & BMCR_ANENABLE) {
|
|
+ /* auto neg enabled */
|
|
+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
|
|
+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
|
|
+ } else {
|
|
+ /* no auto neg, just read duplex config */
|
|
+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
|
|
+ }
|
|
+
|
|
+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
|
|
+ dev->name, (duplex) ? "full" : "half");
|
|
+
|
|
+ if (duplex) {
|
|
+ /* full duplex */
|
|
+ sp->eth_regs->mac_control =
|
|
+ ((sp->eth_regs->
|
|
+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
|
|
+ } else {
|
|
+ /* half duplex */
|
|
+ sp->eth_regs->mac_control =
|
|
+ ((sp->eth_regs->
|
|
+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
|
|
+ }
|
|
+ } else {
|
|
+ /* no link */
|
|
+ sp->link = 0;
|
|
+ }
|
|
+ sp->phyData = phyData;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int ar231x_reset_reg(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned int ethsal, ethsah;
|
|
+ unsigned int flags;
|
|
+
|
|
+ *sp->int_regs |= sp->cfg->reset_mac;
|
|
+ mdelay(10);
|
|
+ *sp->int_regs &= ~sp->cfg->reset_mac;
|
|
+ mdelay(10);
|
|
+ *sp->int_regs |= sp->cfg->reset_phy;
|
|
+ mdelay(10);
|
|
+ *sp->int_regs &= ~sp->cfg->reset_phy;
|
|
+ mdelay(10);
|
|
+
|
|
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
|
|
+ mdelay(10);
|
|
+ sp->dma_regs->bus_mode =
|
|
+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
|
|
+
|
|
+ /* enable interrupts */
|
|
+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
|
|
+ DMA_STATUS_NIS |
|
|
+ DMA_STATUS_RI |
|
|
+ DMA_STATUS_TI | DMA_STATUS_FBE);
|
|
+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
|
|
+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
|
|
+ sp->dma_regs->control =
|
|
+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
|
|
+
|
|
+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
|
|
+ sp->eth_regs->vlan_tag = (0x8100);
|
|
+
|
|
+ /* Enable Ethernet Interface */
|
|
+ flags = (MAC_CONTROL_TE | /* transmit enable */
|
|
+ MAC_CONTROL_PM | /* pass mcast */
|
|
+ MAC_CONTROL_F | /* full duplex */
|
|
+ MAC_CONTROL_HBD); /* heart beat disabled */
|
|
+
|
|
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
|
|
+ flags |= MAC_CONTROL_PR;
|
|
+ }
|
|
+ sp->eth_regs->mac_control = flags;
|
|
+
|
|
+ /* Set all Ethernet station address registers to their initial values */
|
|
+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
|
|
+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
|
|
+
|
|
+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
|
|
+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
|
|
+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
|
|
+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
|
|
+
|
|
+ sp->eth_regs->mac_addr[0] = ethsah;
|
|
+ sp->eth_regs->mac_addr[1] = ethsal;
|
|
+
|
|
+ mdelay(10);
|
|
+
|
|
+ return (0);
|
|
+}
|
|
+
|
|
+
|
|
+static int ar231x_init(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ int ecode = 0;
|
|
+
|
|
+ /*
|
|
+ * Allocate descriptors
|
|
+ */
|
|
+ if (ar231x_allocate_descriptors(dev)) {
|
|
+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
|
|
+ dev->name, __FUNCTION__);
|
|
+ ecode = -EAGAIN;
|
|
+ goto init_error;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Get the memory for the skb rings.
|
|
+ */
|
|
+ if (sp->rx_skb == NULL) {
|
|
+ sp->rx_skb =
|
|
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
|
|
+ GFP_KERNEL);
|
|
+ if (!(sp->rx_skb)) {
|
|
+ printk("%s: %s: rx_skb kmalloc failed\n",
|
|
+ dev->name, __FUNCTION__);
|
|
+ ecode = -EAGAIN;
|
|
+ goto init_error;
|
|
+ }
|
|
+ }
|
|
+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
|
|
+
|
|
+ if (sp->tx_skb == NULL) {
|
|
+ sp->tx_skb =
|
|
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
|
|
+ GFP_KERNEL);
|
|
+ if (!(sp->tx_skb)) {
|
|
+ printk("%s: %s: tx_skb kmalloc failed\n",
|
|
+ dev->name, __FUNCTION__);
|
|
+ ecode = -EAGAIN;
|
|
+ goto init_error;
|
|
+ }
|
|
+ }
|
|
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
|
|
+
|
|
+ /*
|
|
+ * Set tx_csm before we start receiving interrupts, otherwise
|
|
+ * the interrupt handler might think it is supposed to process
|
|
+ * tx ints before we are up and running, which may cause a null
|
|
+ * pointer access in the int handler.
|
|
+ */
|
|
+ sp->rx_skbprd = 0;
|
|
+ sp->cur_rx = 0;
|
|
+ sp->tx_prd = 0;
|
|
+ sp->tx_csm = 0;
|
|
+
|
|
+ /*
|
|
+ * Zero the stats before starting the interface
|
|
+ */
|
|
+ memset(&dev->stats, 0, sizeof(dev->stats));
|
|
+
|
|
+ /*
|
|
+ * We load the ring here as there seem to be no way to tell the
|
|
+ * firmware to wipe the ring without re-initializing it.
|
|
+ */
|
|
+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
|
|
+
|
|
+ /*
|
|
+ * Init hardware
|
|
+ */
|
|
+ ar231x_reset_reg(dev);
|
|
+
|
|
+ /*
|
|
+ * Get the IRQ
|
|
+ */
|
|
+ ecode =
|
|
+ request_irq(dev->irq, &ar231x_interrupt,
|
|
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
|
|
+ dev->name, dev);
|
|
+ if (ecode) {
|
|
+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
|
|
+ dev->name, __FUNCTION__, dev->irq);
|
|
+ goto init_error;
|
|
+ }
|
|
+
|
|
+
|
|
+ tasklet_enable(&sp->rx_tasklet);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+ init_error:
|
|
+ ar231x_init_cleanup(dev);
|
|
+ return ecode;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Load the rx ring.
|
|
+ *
|
|
+ * Loading rings is safe without holding the spin lock since this is
|
|
+ * done only before the device is enabled, thus no interrupts are
|
|
+ * generated and by the interrupt handler/tasklet handler.
|
|
+ */
|
|
+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
|
|
+{
|
|
+
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ short i, idx;
|
|
+
|
|
+ idx = sp->rx_skbprd;
|
|
+
|
|
+ for (i = 0; i < nr_bufs; i++) {
|
|
+ struct sk_buff *skb;
|
|
+ ar231x_descr_t *rd;
|
|
+
|
|
+ if (sp->rx_skb[idx])
|
|
+ break;
|
|
+
|
|
+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
|
|
+ if (!skb) {
|
|
+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
|
|
+ __FUNCTION__);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Make sure IP header starts on a fresh cache line.
|
|
+ */
|
|
+ skb->dev = dev;
|
|
+ skb_reserve(skb, RX_OFFSET);
|
|
+ sp->rx_skb[idx] = skb;
|
|
+
|
|
+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
|
|
+
|
|
+ /* initialize dma descriptor */
|
|
+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
|
|
+ DMA_RX1_CHAINED);
|
|
+ rd->addr = virt_to_phys(skb->data);
|
|
+ rd->descr =
|
|
+ virt_to_phys(&sp->
|
|
+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
|
|
+ rd->status = DMA_RX_OWN;
|
|
+
|
|
+ idx = DSC_NEXT(idx);
|
|
+ }
|
|
+
|
|
+ if (i)
|
|
+ sp->rx_skbprd = idx;
|
|
+
|
|
+ return;
|
|
+}
|
|
+
|
|
+#define AR2313_MAX_PKTS_PER_CALL 64
|
|
+
|
|
+static int ar231x_rx_int(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ struct sk_buff *skb, *skb_new;
|
|
+ ar231x_descr_t *rxdesc;
|
|
+ unsigned int status;
|
|
+ u32 idx;
|
|
+ int pkts = 0;
|
|
+ int rval;
|
|
+
|
|
+ idx = sp->cur_rx;
|
|
+
|
|
+ /* process at most the entire ring and then wait for another interrupt
|
|
+ */
|
|
+ while (1) {
|
|
+
|
|
+ rxdesc = &sp->rx_ring[idx];
|
|
+ status = rxdesc->status;
|
|
+ if (status & DMA_RX_OWN) {
|
|
+ /* SiByte owns descriptor or descr not yet filled in */
|
|
+ rval = 0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
|
|
+ rval = 1;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
|
|
+ dev->stats.rx_errors++;
|
|
+ dev->stats.rx_dropped++;
|
|
+
|
|
+ /* add statistics counters */
|
|
+ if (status & DMA_RX_ERR_CRC)
|
|
+ dev->stats.rx_crc_errors++;
|
|
+ if (status & DMA_RX_ERR_COL)
|
|
+ dev->stats.rx_over_errors++;
|
|
+ if (status & DMA_RX_ERR_LENGTH)
|
|
+ dev->stats.rx_length_errors++;
|
|
+ if (status & DMA_RX_ERR_RUNT)
|
|
+ dev->stats.rx_over_errors++;
|
|
+ if (status & DMA_RX_ERR_DESC)
|
|
+ dev->stats.rx_over_errors++;
|
|
+
|
|
+ } else {
|
|
+ /* alloc new buffer. */
|
|
+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
|
|
+ if (skb_new != NULL) {
|
|
+
|
|
+ skb = sp->rx_skb[idx];
|
|
+ /* set skb */
|
|
+ skb_put(skb,
|
|
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
|
|
+
|
|
+ dev->stats.rx_bytes += skb->len;
|
|
+ skb->protocol = eth_type_trans(skb, dev);
|
|
+ /* pass the packet to upper layers */
|
|
+ netif_rx(skb);
|
|
+
|
|
+ skb_new->dev = dev;
|
|
+ /* 16 bit align */
|
|
+ skb_reserve(skb_new, RX_OFFSET);
|
|
+ /* reset descriptor's curr_addr */
|
|
+ rxdesc->addr = virt_to_phys(skb_new->data);
|
|
+
|
|
+ dev->stats.rx_packets++;
|
|
+ sp->rx_skb[idx] = skb_new;
|
|
+ } else {
|
|
+ dev->stats.rx_dropped++;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
|
|
+ DMA_RX1_CHAINED);
|
|
+ rxdesc->status = DMA_RX_OWN;
|
|
+
|
|
+ idx = DSC_NEXT(idx);
|
|
+ }
|
|
+
|
|
+ sp->cur_rx = idx;
|
|
+
|
|
+ return rval;
|
|
+}
|
|
+
|
|
+
|
|
+static void ar231x_tx_int(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ u32 idx;
|
|
+ struct sk_buff *skb;
|
|
+ ar231x_descr_t *txdesc;
|
|
+ unsigned int status = 0;
|
|
+
|
|
+ idx = sp->tx_csm;
|
|
+
|
|
+ while (idx != sp->tx_prd) {
|
|
+ txdesc = &sp->tx_ring[idx];
|
|
+
|
|
+ if ((status = txdesc->status) & DMA_TX_OWN) {
|
|
+ /* ar231x dma still owns descr */
|
|
+ break;
|
|
+ }
|
|
+ /* done with this descriptor */
|
|
+ dma_unmap_single(NULL, txdesc->addr,
|
|
+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
|
|
+ DMA_TO_DEVICE);
|
|
+ txdesc->status = 0;
|
|
+
|
|
+ if (status & DMA_TX_ERROR) {
|
|
+ dev->stats.tx_errors++;
|
|
+ dev->stats.tx_dropped++;
|
|
+ if (status & DMA_TX_ERR_UNDER)
|
|
+ dev->stats.tx_fifo_errors++;
|
|
+ if (status & DMA_TX_ERR_HB)
|
|
+ dev->stats.tx_heartbeat_errors++;
|
|
+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
|
|
+ dev->stats.tx_carrier_errors++;
|
|
+ if (status & (DMA_TX_ERR_LATE |
|
|
+ DMA_TX_ERR_COL |
|
|
+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
|
|
+ dev->stats.tx_aborted_errors++;
|
|
+ } else {
|
|
+ /* transmit OK */
|
|
+ dev->stats.tx_packets++;
|
|
+ }
|
|
+
|
|
+ skb = sp->tx_skb[idx];
|
|
+ sp->tx_skb[idx] = NULL;
|
|
+ idx = DSC_NEXT(idx);
|
|
+ dev->stats.tx_bytes += skb->len;
|
|
+ dev_kfree_skb_irq(skb);
|
|
+ }
|
|
+
|
|
+ sp->tx_csm = idx;
|
|
+
|
|
+ return;
|
|
+}
|
|
+
|
|
+
|
|
+static void rx_tasklet_func(unsigned long data)
|
|
+{
|
|
+ struct net_device *dev = (struct net_device *) data;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+
|
|
+ if (sp->unloading) {
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ if (ar231x_rx_int(dev)) {
|
|
+ tasklet_hi_schedule(&sp->rx_tasklet);
|
|
+ } else {
|
|
+ unsigned long flags;
|
|
+ spin_lock_irqsave(&sp->lock, flags);
|
|
+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
|
|
+ spin_unlock_irqrestore(&sp->lock, flags);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void rx_schedule(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+
|
|
+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
|
|
+
|
|
+ tasklet_hi_schedule(&sp->rx_tasklet);
|
|
+}
|
|
+
|
|
+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct net_device *dev = (struct net_device *) dev_id;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned int status, enabled;
|
|
+
|
|
+ /* clear interrupt */
|
|
+ /*
|
|
+ * Don't clear RI bit if currently disabled.
|
|
+ */
|
|
+ status = sp->dma_regs->status;
|
|
+ enabled = sp->dma_regs->intr_ena;
|
|
+ sp->dma_regs->status = status & enabled;
|
|
+
|
|
+ if (status & DMA_STATUS_NIS) {
|
|
+ /* normal status */
|
|
+ /*
|
|
+ * Don't schedule rx processing if interrupt
|
|
+ * is already disabled.
|
|
+ */
|
|
+ if (status & enabled & DMA_STATUS_RI) {
|
|
+ /* receive interrupt */
|
|
+ rx_schedule(dev);
|
|
+ }
|
|
+ if (status & DMA_STATUS_TI) {
|
|
+ /* transmit interrupt */
|
|
+ ar231x_tx_int(dev);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* abnormal status */
|
|
+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
|
|
+ ar231x_restart(dev);
|
|
+ }
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+
|
|
+static int ar231x_open(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned int ethsal, ethsah;
|
|
+
|
|
+ /* reset the hardware, in case the MAC address changed */
|
|
+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
|
|
+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
|
|
+
|
|
+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
|
|
+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
|
|
+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
|
|
+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
|
|
+
|
|
+ sp->eth_regs->mac_addr[0] = ethsah;
|
|
+ sp->eth_regs->mac_addr[1] = ethsal;
|
|
+
|
|
+ mdelay(10);
|
|
+
|
|
+ dev->mtu = 1500;
|
|
+ netif_start_queue(dev);
|
|
+
|
|
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ar231x_tx_timeout(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&sp->lock, flags);
|
|
+ ar231x_restart(dev);
|
|
+ spin_unlock_irqrestore(&sp->lock, flags);
|
|
+}
|
|
+
|
|
+static void ar231x_halt(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ int j;
|
|
+
|
|
+ tasklet_disable(&sp->rx_tasklet);
|
|
+
|
|
+ /* kill the MAC */
|
|
+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
|
|
+ MAC_CONTROL_TE); /* disable Transmits */
|
|
+ /* stop dma */
|
|
+ sp->dma_regs->control = 0;
|
|
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
|
|
+
|
|
+ /* place phy and MAC in reset */
|
|
+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
|
|
+
|
|
+ /* free buffers on tx ring */
|
|
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
|
|
+ struct sk_buff *skb;
|
|
+ ar231x_descr_t *txdesc;
|
|
+
|
|
+ txdesc = &sp->tx_ring[j];
|
|
+ txdesc->descr = 0;
|
|
+
|
|
+ skb = sp->tx_skb[j];
|
|
+ if (skb) {
|
|
+ dev_kfree_skb(skb);
|
|
+ sp->tx_skb[j] = NULL;
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * close should do nothing. Here's why. It's called when
|
|
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
|
|
+ * the irq is gone forever ! When bond0 is made 'up' again,
|
|
+ * the ar231x_open () does not call request_irq (). Worse,
|
|
+ * the call to ar231x_halt() generates a WDOG reset due to
|
|
+ * the write to 'sp->int_regs' and the box reboots.
|
|
+ * Commenting this out is good since it allows the
|
|
+ * system to resume when bond0 is made up again.
|
|
+ */
|
|
+static int ar231x_close(struct net_device *dev)
|
|
+{
|
|
+#if 0
|
|
+ /*
|
|
+ * Disable interrupts
|
|
+ */
|
|
+ disable_irq(dev->irq);
|
|
+
|
|
+ /*
|
|
+ * Without (or before) releasing irq and stopping hardware, this
|
|
+ * is an absolute non-sense, by the way. It will be reset instantly
|
|
+ * by the first irq.
|
|
+ */
|
|
+ netif_stop_queue(dev);
|
|
+
|
|
+ /* stop the MAC and DMA engines */
|
|
+ ar231x_halt(dev);
|
|
+
|
|
+ /* release the interrupt */
|
|
+ free_irq(dev->irq, dev);
|
|
+
|
|
+#endif
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ ar231x_descr_t *td;
|
|
+ u32 idx;
|
|
+
|
|
+ idx = sp->tx_prd;
|
|
+ td = &sp->tx_ring[idx];
|
|
+
|
|
+ if (td->status & DMA_TX_OWN) {
|
|
+ /* free skbuf and lie to the caller that we sent it out */
|
|
+ dev->stats.tx_dropped++;
|
|
+ dev_kfree_skb(skb);
|
|
+
|
|
+ /* restart transmitter in case locked */
|
|
+ sp->dma_regs->xmt_poll = 0;
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ /* Setup the transmit descriptor. */
|
|
+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
|
|
+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
|
|
+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
|
|
+ td->status = DMA_TX_OWN;
|
|
+
|
|
+ /* kick transmitter last */
|
|
+ sp->dma_regs->xmt_poll = 0;
|
|
+
|
|
+ sp->tx_skb[idx] = skb;
|
|
+ idx = DSC_NEXT(idx);
|
|
+ sp->tx_prd = idx;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
+{
|
|
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ int ret;
|
|
+
|
|
+ switch (cmd) {
|
|
+
|
|
+ case SIOCETHTOOL:
|
|
+ spin_lock_irq(&sp->lock);
|
|
+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
|
|
+ spin_unlock_irq(&sp->lock);
|
|
+ return ret;
|
|
+
|
|
+ case SIOCSIFHWADDR:
|
|
+ if (copy_from_user
|
|
+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
|
|
+ return -EFAULT;
|
|
+ return 0;
|
|
+
|
|
+ case SIOCGIFHWADDR:
|
|
+ if (copy_to_user
|
|
+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
|
|
+ return -EFAULT;
|
|
+ return 0;
|
|
+
|
|
+ case SIOCGMIIPHY:
|
|
+ case SIOCGMIIREG:
|
|
+ case SIOCSMIIREG:
|
|
+ return phy_mii_ioctl(sp->phy_dev, ifr, cmd);
|
|
+
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return -EOPNOTSUPP;
|
|
+}
|
|
+
|
|
+static void ar231x_adjust_link(struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ unsigned int mc;
|
|
+
|
|
+ if (!sp->phy_dev->link)
|
|
+ return;
|
|
+
|
|
+ if (sp->phy_dev->duplex != sp->oldduplex) {
|
|
+ mc = readl(&sp->eth_regs->mac_control);
|
|
+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
|
|
+ if (sp->phy_dev->duplex)
|
|
+ mc |= MAC_CONTROL_F;
|
|
+ else
|
|
+ mc |= MAC_CONTROL_DRO;
|
|
+ writel(mc, &sp->eth_regs->mac_control);
|
|
+ sp->oldduplex = sp->phy_dev->duplex;
|
|
+ }
|
|
+}
|
|
+
|
|
+#define MII_ADDR(phy, reg) \
|
|
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
|
|
+
|
|
+static int
|
|
+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
|
|
+{
|
|
+ struct net_device *const dev = bus->priv;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
|
|
+
|
|
+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
|
|
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
|
|
+ return (ethernet->mii_data >> MII_DATA_SHIFT);
|
|
+}
|
|
+
|
|
+static int
|
|
+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
|
|
+ u16 value)
|
|
+{
|
|
+ struct net_device *const dev = bus->priv;
|
|
+ struct ar231x_private *sp = netdev_priv(dev);
|
|
+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
|
|
+
|
|
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
|
|
+ ethernet->mii_data = value << MII_DATA_SHIFT;
|
|
+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar231x_mdiobus_reset(struct mii_bus *bus)
|
|
+{
|
|
+ struct net_device *const dev = bus->priv;
|
|
+
|
|
+ ar231x_reset_reg(dev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar231x_mdiobus_probe (struct net_device *dev)
|
|
+{
|
|
+ struct ar231x_private *const sp = netdev_priv(dev);
|
|
+ struct phy_device *phydev = NULL;
|
|
+ int phy_addr;
|
|
+
|
|
+ /* find the first (lowest address) PHY on the current MAC's MII bus */
|
|
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
|
|
+ if (sp->mii_bus->phy_map[phy_addr]) {
|
|
+ phydev = sp->mii_bus->phy_map[phy_addr];
|
|
+ sp->phy = phy_addr;
|
|
+ break; /* break out with first one found */
|
|
+ }
|
|
+
|
|
+ if (!phydev) {
|
|
+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* now we are supposed to have a proper phydev, to attach to... */
|
|
+ BUG_ON(!phydev);
|
|
+ BUG_ON(phydev->attached_dev);
|
|
+
|
|
+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
|
|
+ PHY_INTERFACE_MODE_MII);
|
|
+
|
|
+ if (IS_ERR(phydev)) {
|
|
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
|
|
+ return PTR_ERR(phydev);
|
|
+ }
|
|
+
|
|
+ /* mask with MAC supported features */
|
|
+ phydev->supported &= (SUPPORTED_10baseT_Half
|
|
+ | SUPPORTED_10baseT_Full
|
|
+ | SUPPORTED_100baseT_Half
|
|
+ | SUPPORTED_100baseT_Full
|
|
+ | SUPPORTED_Autoneg
|
|
+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
|
|
+ | SUPPORTED_MII
|
|
+ | SUPPORTED_TP);
|
|
+
|
|
+ phydev->advertising = phydev->supported;
|
|
+
|
|
+ sp->oldduplex = -1;
|
|
+ sp->phy_dev = phydev;
|
|
+
|
|
+ printk(KERN_INFO "%s: attached PHY driver [%s] "
|
|
+ "(mii_bus:phy_addr=%s)\n",
|
|
+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
--- /dev/null
|
|
+++ b/drivers/net/ar231x.h
|
|
@@ -0,0 +1,302 @@
|
|
+/*
|
|
+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
|
|
+ *
|
|
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
|
|
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
|
|
+ *
|
|
+ * Thanks to Atheros for providing hardware and documentation
|
|
+ * enabling me to write this driver.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef _AR2313_H_
|
|
+#define _AR2313_H_
|
|
+
|
|
+#include <generated/autoconf.h>
|
|
+#include <linux/bitops.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <ar231x_platform.h>
|
|
+
|
|
+/*
|
|
+ * probe link timer - 5 secs
|
|
+ */
|
|
+#define LINK_TIMER (5*HZ)
|
|
+
|
|
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
|
|
+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
|
|
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
|
|
+
|
|
+#define AR2313_TX_TIMEOUT (HZ/4)
|
|
+
|
|
+/*
|
|
+ * Rings
|
|
+ */
|
|
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
|
|
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
|
|
+
|
|
+#define AR2313_MBGET 2
|
|
+#define AR2313_MBSET 3
|
|
+#define AR2313_PCI_RECONFIG 4
|
|
+#define AR2313_PCI_DUMP 5
|
|
+#define AR2313_TEST_PANIC 6
|
|
+#define AR2313_TEST_NULLPTR 7
|
|
+#define AR2313_READ_DATA 8
|
|
+#define AR2313_WRITE_DATA 9
|
|
+#define AR2313_GET_VERSION 10
|
|
+#define AR2313_TEST_HANG 11
|
|
+#define AR2313_SYNC 12
|
|
+
|
|
+#define DMA_RX_ERR_CRC BIT(1)
|
|
+#define DMA_RX_ERR_DRIB BIT(2)
|
|
+#define DMA_RX_ERR_MII BIT(3)
|
|
+#define DMA_RX_EV2 BIT(5)
|
|
+#define DMA_RX_ERR_COL BIT(6)
|
|
+#define DMA_RX_LONG BIT(7)
|
|
+#define DMA_RX_LS BIT(8) /* last descriptor */
|
|
+#define DMA_RX_FS BIT(9) /* first descriptor */
|
|
+#define DMA_RX_MF BIT(10) /* multicast frame */
|
|
+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
|
|
+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
|
|
+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
|
|
+#define DMA_RX_ERROR BIT(15) /* error summary */
|
|
+#define DMA_RX_LEN_MASK 0x3fff0000
|
|
+#define DMA_RX_LEN_SHIFT 16
|
|
+#define DMA_RX_FILT BIT(30)
|
|
+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
|
|
+
|
|
+#define DMA_RX1_BSIZE_MASK 0x000007ff
|
|
+#define DMA_RX1_BSIZE_SHIFT 0
|
|
+#define DMA_RX1_CHAINED BIT(24)
|
|
+#define DMA_RX1_RER BIT(25)
|
|
+
|
|
+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
|
|
+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
|
|
+#define DMA_TX_COL_MASK 0x78
|
|
+#define DMA_TX_COL_SHIFT 3
|
|
+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
|
|
+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
|
|
+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
|
|
+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
|
|
+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
|
|
+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
|
|
+#define DMA_TX_ERROR BIT(15) /* frame aborted */
|
|
+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
|
|
+
|
|
+#define DMA_TX1_BSIZE_MASK 0x000007ff
|
|
+#define DMA_TX1_BSIZE_SHIFT 0
|
|
+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
|
|
+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
|
|
+#define DMA_TX1_FS BIT(29) /* first segment */
|
|
+#define DMA_TX1_LS BIT(30) /* last segment */
|
|
+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
|
|
+
|
|
+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
|
|
+
|
|
+#define MAC_CONTROL_RE BIT(2) /* receive enable */
|
|
+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
|
|
+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
|
|
+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
|
|
+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
|
|
+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
|
|
+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
|
|
+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
|
|
+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
|
|
+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
|
|
+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
|
|
+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
|
|
+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
|
|
+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
|
|
+#define MAC_CONTROL_F BIT(20) /* full-duplex */
|
|
+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
|
|
+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
|
|
+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
|
|
+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
|
|
+
|
|
+#define MII_ADDR_BUSY BIT(0)
|
|
+#define MII_ADDR_WRITE BIT(1)
|
|
+#define MII_ADDR_REG_SHIFT 6
|
|
+#define MII_ADDR_PHY_SHIFT 11
|
|
+#define MII_DATA_SHIFT 0
|
|
+
|
|
+#define FLOW_CONTROL_FCE BIT(1)
|
|
+
|
|
+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
|
|
+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
|
|
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
|
|
+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
|
|
+
|
|
+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
|
|
+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
|
|
+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
|
|
+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
|
|
+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
|
|
+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
|
|
+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
|
|
+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
|
|
+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
|
|
+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
|
|
+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
|
|
+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
|
|
+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
|
|
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
|
|
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
|
|
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
|
|
+
|
|
+#define DMA_CONTROL_SR BIT(1) /* start receive */
|
|
+#define DMA_CONTROL_ST BIT(13) /* start transmit */
|
|
+#define DMA_CONTROL_SF BIT(21) /* store and forward */
|
|
+
|
|
+
|
|
+typedef struct {
|
|
+ volatile unsigned int status; // OWN, Device control and status.
|
|
+ volatile unsigned int devcs; // pkt Control bits + Length
|
|
+ volatile unsigned int addr; // Current Address.
|
|
+ volatile unsigned int descr; // Next descriptor in chain.
|
|
+} ar231x_descr_t;
|
|
+
|
|
+
|
|
+
|
|
+//
|
|
+// New Combo structure for Both Eth0 AND eth1
|
|
+//
|
|
+typedef struct {
|
|
+ volatile unsigned int mac_control; /* 0x00 */
|
|
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
|
|
+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
|
|
+ volatile unsigned int mii_addr; /* 0x14 */
|
|
+ volatile unsigned int mii_data; /* 0x18 */
|
|
+ volatile unsigned int flow_control; /* 0x1c */
|
|
+ volatile unsigned int vlan_tag; /* 0x20 */
|
|
+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
|
|
+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
|
|
+
|
|
+} ETHERNET_STRUCT;
|
|
+
|
|
+/********************************************************************
|
|
+ * Interrupt controller
|
|
+ ********************************************************************/
|
|
+
|
|
+typedef struct {
|
|
+ volatile unsigned int wdog_control; /* 0x08 */
|
|
+ volatile unsigned int wdog_timer; /* 0x0c */
|
|
+ volatile unsigned int misc_status; /* 0x10 */
|
|
+ volatile unsigned int misc_mask; /* 0x14 */
|
|
+ volatile unsigned int global_status; /* 0x18 */
|
|
+ volatile unsigned int reserved; /* 0x1c */
|
|
+ volatile unsigned int reset_control; /* 0x20 */
|
|
+} INTERRUPT;
|
|
+
|
|
+/********************************************************************
|
|
+ * DMA controller
|
|
+ ********************************************************************/
|
|
+typedef struct {
|
|
+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
|
|
+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
|
|
+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
|
|
+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
|
|
+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
|
|
+ volatile unsigned int status; /* 0x14 (CSR5) */
|
|
+ volatile unsigned int control; /* 0x18 (CSR6) */
|
|
+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
|
|
+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
|
|
+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
|
|
+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
|
|
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
|
|
+} DMA;
|
|
+
|
|
+/*
|
|
+ * Struct private for the Sibyte.
|
|
+ *
|
|
+ * Elements are grouped so variables used by the tx handling goes
|
|
+ * together, and will go into the same cache lines etc. in order to
|
|
+ * avoid cache line contention between the rx and tx handling on SMP.
|
|
+ *
|
|
+ * Frequently accessed variables are put at the beginning of the
|
|
+ * struct to help the compiler generate better/shorter code.
|
|
+ */
|
|
+struct ar231x_private {
|
|
+ struct net_device *dev;
|
|
+ int version;
|
|
+ u32 mb[2];
|
|
+
|
|
+ volatile ETHERNET_STRUCT *phy_regs;
|
|
+ volatile ETHERNET_STRUCT *eth_regs;
|
|
+ volatile DMA *dma_regs;
|
|
+ volatile u32 *int_regs;
|
|
+ struct ar231x_eth *cfg;
|
|
+
|
|
+ spinlock_t lock; /* Serialise access to device */
|
|
+
|
|
+ /*
|
|
+ * RX and TX descriptors, must be adjacent
|
|
+ */
|
|
+ ar231x_descr_t *rx_ring;
|
|
+ ar231x_descr_t *tx_ring;
|
|
+
|
|
+
|
|
+ struct sk_buff **rx_skb;
|
|
+ struct sk_buff **tx_skb;
|
|
+
|
|
+ /*
|
|
+ * RX elements
|
|
+ */
|
|
+ u32 rx_skbprd;
|
|
+ u32 cur_rx;
|
|
+
|
|
+ /*
|
|
+ * TX elements
|
|
+ */
|
|
+ u32 tx_prd;
|
|
+ u32 tx_csm;
|
|
+
|
|
+ /*
|
|
+ * Misc elements
|
|
+ */
|
|
+ char name[48];
|
|
+ struct {
|
|
+ u32 address;
|
|
+ u32 length;
|
|
+ char *mapping;
|
|
+ } desc;
|
|
+
|
|
+
|
|
+ struct timer_list link_timer;
|
|
+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
|
|
+ unsigned short mac;
|
|
+ unsigned short link; /* 0 - link down, 1 - link up */
|
|
+ u16 phyData;
|
|
+
|
|
+ struct tasklet_struct rx_tasklet;
|
|
+ int unloading;
|
|
+
|
|
+ struct phy_device *phy_dev;
|
|
+ struct mii_bus *mii_bus;
|
|
+ int oldduplex;
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * Prototypes
|
|
+ */
|
|
+static int ar231x_init(struct net_device *dev);
|
|
+#ifdef TX_TIMEOUT
|
|
+static void ar231x_tx_timeout(struct net_device *dev);
|
|
+#endif
|
|
+static int ar231x_restart(struct net_device *dev);
|
|
+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
|
|
+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
|
|
+static int ar231x_open(struct net_device *dev);
|
|
+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
+static int ar231x_close(struct net_device *dev);
|
|
+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
|
|
+ int cmd);
|
|
+static void ar231x_init_cleanup(struct net_device *dev);
|
|
+static int ar231x_setup_timer(struct net_device *dev);
|
|
+static void ar231x_link_timer_fn(unsigned long data);
|
|
+static void ar231x_check_link(struct net_device *dev);
|
|
+#endif /* _AR2313_H_ */
|