1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 02:59:00 +02:00
openwrt-xburst/target/linux/etrax-2.6/files/drivers/spi/spi_crisv32_gpio.c
blogic 9b11307b07 add initial support for the crisarchitecture used on foxboards to openwrt
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-02 00:46:02 +00:00

263 lines
7.0 KiB
C

/*
* Simple bitbanged-GPIO SPI driver for ETRAX FS et al.
*
* Copyright (c) 2007 Axis Communications AB
*
* Author: Hans-Peter Nilsson, inspired by earlier work by
* Andre Spanberg but mostly by copying large parts of
* spi_s3c24xx_gpio.c, hence also:
* Copyright (c) 2006 Ben Dooks
* Copyright (c) 2006 Simtec Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/types.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/arch/board.h>
/* Our main driver state. */
struct crisv32_spi_hw_info {
struct crisv32_iopin sclk;
struct crisv32_iopin mosi;
struct crisv32_iopin miso;
struct crisv32_iopin cs;
};
/*
* The driver state hides behind the spi_bitbang state. We're
* responsible for allocating that, so we can get a little something
* for ourselves.
*/
struct crisv32_spi_gpio_devdata {
struct spi_bitbang bitbang;
struct crisv32_spi_hw_info pins;
};
/* Helper function getting the driver state from a spi_device. */
static inline struct crisv32_spi_hw_info *spidev_to_hw(struct spi_device *spi)
{
struct crisv32_spi_gpio_devdata *dd = spi_master_get_devdata(spi->master);
return &dd->pins;
}
/* The SPI-bitbang functions: see spi_bitbang.h at EXPAND_BITBANG_TXRX. */
static inline void setsck(struct spi_device *spi, int is_on)
{
crisv32_io_set(&spidev_to_hw(spi)->sclk, is_on != 0);
}
static inline void setmosi(struct spi_device *spi, int is_on)
{
crisv32_io_set(&spidev_to_hw(spi)->mosi, is_on != 0);
}
static inline u32 getmiso(struct spi_device *spi)
{
return crisv32_io_rd(&spidev_to_hw(spi)->miso) != 0 ? 1 : 0;
}
#define spidelay(x) ndelay(x)
#define EXPAND_BITBANG_TXRX
#include <linux/spi/spi_bitbang.h>
/*
* SPI-bitbang word transmit-functions for the four SPI modes,
* dispatching to the inlined functions we just included.
*/
static u32 crisv32_spi_gpio_txrx_mode0(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
}
static u32 crisv32_spi_gpio_txrx_mode1(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
}
static u32 crisv32_spi_gpio_txrx_mode2(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
}
static u32 crisv32_spi_gpio_txrx_mode3(struct spi_device *spi,
unsigned nsecs, u32 word, u8 bits)
{
return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
}
/* SPI-bitbang chip-select function. */
static void crisv32_spi_gpio_chipselect(struct spi_device *spi, int value)
{
if (spi->mode & SPI_CS_HIGH)
crisv32_io_set(&spidev_to_hw(spi)->cs,
value == BITBANG_CS_ACTIVE ? 1 : 0);
else
crisv32_io_set(&spidev_to_hw(spi)->cs,
value == BITBANG_CS_ACTIVE ? 0 : 1);
}
/* Platform-device probe function. */
static int __devinit crisv32_spi_gpio_probe(struct platform_device *dev)
{
struct spi_master *master;
struct crisv32_spi_gpio_devdata *dd;
struct resource *res;
struct crisv32_spi_gpio_controller_data *gc;
int ret = 0;
/*
* We need to get the controller data as a hardware resource,
* or else it wouldn't be available until *after* the
* spi_bitbang_start call!
*/
res = platform_get_resource_byname(dev, 0, "controller_data_ptr");
if (res == NULL) {
dev_err(&dev->dev, "can't get controller_data resource\n");
return -EIO;
}
gc = (struct crisv32_spi_gpio_controller_data *) res->start;
master = spi_alloc_master(&dev->dev, sizeof *dd);
if (master == NULL) {
dev_err(&dev->dev, "failed to allocate spi master\n");
ret = -ENOMEM;
goto err;
}
dd = spi_master_get_devdata(master);
platform_set_drvdata(dev, dd);
/*
* The device data asks for this driver, and holds the id
* number, which must be unique among the same-type devices.
* We use this as the number of this SPI bus.
*/
master->bus_num = dev->id;
/*
* Allocate pins. Note that thus being allocated as GPIO, we
* don't have to deconfigure them at the end or if something
* fails.
*/
if ((ret = crisv32_io_get_name(&dd->pins.cs, gc->cs)) != 0
|| (ret = crisv32_io_get_name(&dd->pins.miso, gc->miso)) != 0
|| (ret = crisv32_io_get_name(&dd->pins.mosi, gc->mosi)) != 0
|| (ret = crisv32_io_get_name(&dd->pins.sclk, gc->sclk)) != 0)
goto err_no_pins;
/* Set directions of the SPI pins. */
crisv32_io_set_dir(&dd->pins.cs, crisv32_io_dir_out);
crisv32_io_set_dir(&dd->pins.sclk, crisv32_io_dir_out);
crisv32_io_set_dir(&dd->pins.miso, crisv32_io_dir_in);
crisv32_io_set_dir(&dd->pins.mosi, crisv32_io_dir_out);
/* Set state of the SPI pins. */
dev_dbg(&dev->dev, "cs.port 0x%x, pin: %d\n"
dd->pins.cs.port, dd->pins.cs.bit);
/*
* Can't use crisv32_spi_gpio_chipselect(spi, 1) here; we
* don't have a proper "spi" until after spi_bitbang_start.
*/
crisv32_io_set(&dd->pins.cs, 1);
crisv32_io_set(&dd->pins.sclk, 0);
crisv32_io_set(&dd->pins.mosi, 0);
/* Setup SPI bitbang adapter hooks. */
dd->bitbang.master = spi_master_get(master);
dd->bitbang.chipselect = crisv32_spi_gpio_chipselect;
dd->bitbang.txrx_word[SPI_MODE_0] = crisv32_spi_gpio_txrx_mode0;
dd->bitbang.txrx_word[SPI_MODE_1] = crisv32_spi_gpio_txrx_mode1;
dd->bitbang.txrx_word[SPI_MODE_2] = crisv32_spi_gpio_txrx_mode2;
dd->bitbang.txrx_word[SPI_MODE_3] = crisv32_spi_gpio_txrx_mode3;
ret = spi_bitbang_start(&dd->bitbang);
if (ret)
goto err_no_bitbang;
printk (KERN_INFO "CRIS v32 SPI driver for GPIO"
" (cs: %s, miso: %s, mosi: %s, sclk: %s)\n",
gc->cs, gc->miso, gc->mosi, gc->sclk);
return 0;
err_no_bitbang:
spi_master_put(dd->bitbang.master);
err_no_pins:
platform_set_drvdata(dev, NULL);
err:
return ret;
}
/* Platform-device remove-function. */
static int __devexit crisv32_spi_gpio_remove(struct platform_device *dev)
{
struct crisv32_spi_gpio_devdata *dd = platform_get_drvdata(dev);
int ret;
ret = spi_bitbang_stop(&dd->bitbang);
if (ret != 0)
return ret;
spi_master_put(dd->bitbang.master);
platform_set_drvdata(dev, NULL);
return 0;
}
/*
* For the time being, there's no suspend/resume support to care
* about, so we let those handlers default to NULL.
*/
static struct platform_driver crisv32_spi_gpio_drv = {
.probe = crisv32_spi_gpio_probe,
.remove = __devexit_p(crisv32_spi_gpio_remove),
.driver = {
.name = "spi_crisv32_gpio",
.owner = THIS_MODULE,
},
};
/* Module init function. */
static int __devinit crisv32_spi_gpio_init(void)
{
return platform_driver_register(&crisv32_spi_gpio_drv);
}
/* Module exit function. */
static void __devexit crisv32_spi_gpio_exit(void)
{
platform_driver_unregister(&crisv32_spi_gpio_drv);
}
module_init(crisv32_spi_gpio_init);
module_exit(crisv32_spi_gpio_exit);
MODULE_DESCRIPTION("CRIS v32 SPI-GPIO Driver");
MODULE_AUTHOR("Hans-Peter Nilsson, <hp@axis.com>");
MODULE_LICENSE("GPL");