| .. |
|
ar71xx.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
dev-ap91-eth.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
dev-ap91-eth.h
|
ar71xx: allow overriding of the lan port names on AP91 based boards
|
2010-03-09 18:05:45 +00:00 |
|
dev-ap91-pci.c
|
ar71xx: update AR7240 PCI code
|
2009-12-20 13:46:23 +00:00 |
|
dev-ap91-pci.h
|
ar71xx: remove unnecessary includes
|
2009-12-25 13:09:00 +00:00 |
|
dev-ap94-pci.c
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
|
dev-ap94-pci.h
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
|
dev-ar913x-wmac.c
|
ar71xx: merge AR71XX_IRQ_CPU_{PCI,WMAC} into AR71XX_IRQ_CPU_IP2
|
2010-03-18 19:18:46 +00:00 |
|
dev-ar913x-wmac.h
|
ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function
|
2009-12-27 20:59:50 +00:00 |
|
dev-dsa.c
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-dsa.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-gpio-buttons.c
|
ar71xx: fix 2.6.34 build errors
|
2010-06-07 09:18:13 +00:00 |
|
dev-gpio-buttons.h
|
ar71xx: move gpio-buttons support into a spearate file
|
2009-12-26 14:19:01 +00:00 |
|
dev-leds-gpio.c
|
ar71xx: fix 2.6.34 build errors
|
2010-06-07 09:18:13 +00:00 |
|
dev-leds-gpio.h
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
|
dev-m25p80.c
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-m25p80.h
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-pb9x-pci.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb9x-pci.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb42-pci.c
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-pb42-pci.h
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-usb.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
dev-usb.h
|
ar71xx: move USB host device support into a separate file
|
2009-12-26 14:19:13 +00:00 |
|
devices.c
|
ar71xx: reset the mdio bus on ar7241/ar7242
|
2010-03-28 00:35:44 +00:00 |
|
devices.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
early_printk.c
|
[ar71xx] move early_printk stuff into a separate file
|
2009-08-26 07:31:04 +00:00 |
|
gpio.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
irq.c
|
ar71xx: fix a wifi card stability issue
|
2010-04-24 17:24:11 +00:00 |
|
Kconfig
|
ar71xx: adding support for zyxel nbg460n/550n/550nh boards
|
2010-04-18 16:24:12 +00:00 |
|
mach-ap81.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-ap83.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-aw-nr580.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-dir-600-a1.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-dir-615-c1.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-dir-825-b1.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-mzk-w04nu.c
|
ar71xx: fix firmware partition size on the MZK-W04NU board
|
2010-04-26 18:28:01 +00:00 |
|
mach-mzk-w300nh.c
|
ar71xx: remove config partition from the mtd map on the MZK-W300NH board
|
2010-04-26 18:28:04 +00:00 |
|
mach-nbg460n.c
|
ar71xx: fix nbg460n mtd partitions
|
2010-05-14 08:37:58 +00:00 |
|
mach-pb42.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-pb44.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-pb92.c
|
ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version)
|
2010-04-06 00:12:50 +00:00 |
|
mach-rb4xx.c
|
ar71xx: fix phy_mask for the RB450
|
2010-06-09 19:48:35 +00:00 |
|
mach-rb750.c
|
ar71xx: override lan port names on the RB750
|
2010-03-09 18:05:48 +00:00 |
|
mach-tew-632brp.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-tl-wr741nd.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-tl-wr841n.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-tl-wr941nd.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-tl-wr1043nd.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-ubnt.c
|
ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype
|
2010-06-12 13:20:39 +00:00 |
|
mach-wndr3700.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-wnr2000.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-wp543.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-wrt160nl.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-wrt400n.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
mach-wzr-hp-g300nh.c
|
ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
|
2010-04-21 19:07:19 +00:00 |
|
machtype.h
|
ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype
|
2010-06-12 13:20:39 +00:00 |
|
Makefile
|
ar71xx: adding support for zyxel nbg460n/550n/550nh boards
|
2010-04-18 16:24:12 +00:00 |
|
nvram.c
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
|
nvram.h
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
|
pci.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
prom.c
|
ar71xx: avoid duplicated 'board' parameter in kernel command line
|
2010-06-14 20:02:44 +00:00 |
|
setup.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
78fe3d5e8c