1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-07 20:54:04 +02:00
openwrt-xburst/target/linux/ramips/base-files/etc/uci-defaults/network
juhosg 3c681484c2 ramips: setup default network configuration for RT-N15
Based on a patch by Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:54 +00:00

114 lines
2.0 KiB
Bash
Executable File

#!/bin/sh
. /etc/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
if [ ! -x /usr/sbin/maccalc ]; then
echo "$0: maccalc not found!"
return
fi
get_mac_binary()
{
local mtdname="$1"
local seek="$2"
local part
part=$(find_mtd_part "$mtdname")
if [ -z "$part" ]; then
echo "get_mac_binary: partition $mtdname not found!" >&2
return
fi
dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
}
get_mac_nvram()
{
local mtdname="$1"
local key="$2"
local part
local mac_dirty
part=$(find_mtd_part "$mtdname")
if [ -z "$part" ]; then
echo "get_mac_nvram: partition $mtdname not found!" >&2
return
fi
mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
# "canonicalize" mac
maccalc add "$mac_dirty" 0
}
ramips_setup_interfaces()
{
local board="$1"
ucidef_set_interface_loopback
case $board in
argus-atp52b | \
b2c | \
f5d8235-v2 | \
nw718)
ucidef_set_interfaces_lan_wan "eth0.1 eth0.2"
;;
rt-n15)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366s" "1" "1"
ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
;;
*)
RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
if [ -n "${RT3X5X}" ]; then
ucidef_set_interfaces_lan_wan "eth0.1 eth0.2"
else
ucidef_set_interfaces_lan_wan "eth0 eth1"
fi
;;
esac
}
ramips_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
f5d8235-v2)
lan_mac=$(get_mac_nvram "u-boot" 262148)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
argus-atp52b | \
b2c | \
nw718 | \
rt-n15)
lan_mac=$(get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
esac
[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
[ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
board=$(ramips_board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
uci commit network
exit 0