mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-05 15:59:42 +02:00
efe0e0af7d
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11195 3c298f89-4303-0410-b956-a3cf2f4a3e73
37 lines
1.4 KiB
Diff
37 lines
1.4 KiB
Diff
Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
|
|
===================================================================
|
|
--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
|
|
+++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
|
|
@@ -618,7 +618,6 @@ void __init at91_init_leds(u8 cpu_led, u
|
|
|
|
|
|
#if defined(CONFIG_NEW_LEDS)
|
|
-
|
|
static struct platform_device at91_leds = {
|
|
.name = "at91_leds",
|
|
.id = -1,
|
|
@@ -724,6 +723,10 @@ static inline void configure_usart0_pins
|
|
* We need to drive the pin manually. Default is off (RTS is active low).
|
|
*/
|
|
at91_set_gpio_output(AT91_PIN_PA21, 1);
|
|
+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */
|
|
+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */
|
|
+ at91_set_deglitch(AT91_PIN_PA19, 1);
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -835,6 +838,12 @@ static inline void configure_usart3_pins
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
|
|
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
|
|
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
|
|
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */
|
|
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */
|
|
+ at91_set_deglitch(AT91_PIN_PA24, 1);
|
|
}
|
|
|
|
struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|