mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-21 17:10:14 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25725 3c298f89-4303-0410-b956-a3cf2f4a3e73
422 lines
9.4 KiB
Diff
422 lines
9.4 KiB
Diff
--- /dev/null
|
|
+++ b/drivers/gpio/gw_i2c_pld.c
|
|
@@ -0,0 +1,371 @@
|
|
+/*
|
|
+ * Gateworks I2C PLD GPIO expander
|
|
+ *
|
|
+ * Copyright (C) 2009 Gateworks Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/hardirq.h>
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/i2c/gw_i2c_pld.h>
|
|
+#include <asm/gpio.h>
|
|
+
|
|
+static const struct i2c_device_id gw_i2c_pld_id[] = {
|
|
+ { "gw_i2c_pld", 8 },
|
|
+ { }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
|
|
+
|
|
+/*
|
|
+ * The Gateworks I2C PLD chip only expose one read and one
|
|
+ * write register. Writing a "one" bit (to match the reset state) lets
|
|
+ * that pin be used as an input. It is an open-drain model.
|
|
+ */
|
|
+
|
|
+struct gw_i2c_pld {
|
|
+ struct gpio_chip chip;
|
|
+ struct i2c_client *client;
|
|
+ unsigned out; /* software latch */
|
|
+};
|
|
+
|
|
+/*-------------------------------------------------------------------------*/
|
|
+
|
|
+/*
|
|
+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
|
|
+ * thus we cannot use standard i2c_smbus functions. We have recreated
|
|
+ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
|
|
+ * as the device still exists on the I2C bus.
|
|
+*/
|
|
+
|
|
+#define PLD_SCL_GPIO 6
|
|
+#define PLD_SDA_GPIO 7
|
|
+
|
|
+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
|
|
+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
|
|
+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
|
|
+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
|
|
+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
|
|
+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
|
|
+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
|
|
+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
|
|
+
|
|
+static int i2c_pld_write_byte(int address, int byte)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ address = (address << 1) & ~0x1;
|
|
+
|
|
+ SDA_HI();
|
|
+ SDA_EN();
|
|
+ SCL_EN();
|
|
+ SCL_HI();
|
|
+ SDA_LO();
|
|
+ SCL_LO();
|
|
+
|
|
+ for (i = 7; i >= 0; i--)
|
|
+ {
|
|
+ if (address & (1 << i))
|
|
+ SDA_HI();
|
|
+ else
|
|
+ SDA_LO();
|
|
+
|
|
+ SCL_HI();
|
|
+ SCL_LO();
|
|
+ }
|
|
+
|
|
+ SDA_DIS();
|
|
+ SCL_HI();
|
|
+ SDA_IN(i);
|
|
+ SCL_LO();
|
|
+ SDA_EN();
|
|
+
|
|
+ for (i = 7; i >= 0; i--)
|
|
+ {
|
|
+ if (byte & (1 << i))
|
|
+ SDA_HI();
|
|
+ else
|
|
+ SDA_LO();
|
|
+ SCL_HI();
|
|
+ SCL_LO();
|
|
+ }
|
|
+
|
|
+ SDA_DIS();
|
|
+ SCL_HI();
|
|
+ SDA_IN(i);
|
|
+ SCL_LO();
|
|
+
|
|
+ SDA_HI();
|
|
+ SDA_EN();
|
|
+
|
|
+ SDA_LO();
|
|
+ SCL_HI();
|
|
+ SDA_HI();
|
|
+ SCL_LO();
|
|
+ SCL_HI();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static unsigned int i2c_pld_read_byte(int address)
|
|
+{
|
|
+ int i = 0, byte = 0;
|
|
+ int bit;
|
|
+
|
|
+ address = (address << 1) | 0x1;
|
|
+
|
|
+ SDA_HI();
|
|
+ SDA_EN();
|
|
+ SCL_EN();
|
|
+ SCL_HI();
|
|
+ SDA_LO();
|
|
+ SCL_LO();
|
|
+
|
|
+ for (i = 7; i >= 0; i--)
|
|
+ {
|
|
+ if (address & (1 << i))
|
|
+ SDA_HI();
|
|
+ else
|
|
+ SDA_LO();
|
|
+
|
|
+ SCL_HI();
|
|
+ SCL_LO();
|
|
+ }
|
|
+
|
|
+ SDA_DIS();
|
|
+ SCL_HI();
|
|
+ SDA_IN(i);
|
|
+ SCL_LO();
|
|
+ SDA_EN();
|
|
+
|
|
+ SDA_DIS();
|
|
+ for (i = 7; i >= 0; i--)
|
|
+ {
|
|
+ SCL_HI();
|
|
+ SDA_IN(bit);
|
|
+ byte |= bit << i;
|
|
+ SCL_LO();
|
|
+ }
|
|
+
|
|
+ SDA_LO();
|
|
+ SCL_HI();
|
|
+ SDA_HI();
|
|
+ SCL_LO();
|
|
+ SCL_HI();
|
|
+
|
|
+ return byte;
|
|
+}
|
|
+
|
|
+
|
|
+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
|
|
+{
|
|
+ int ret;
|
|
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
|
|
+ struct i2c_adapter *adap = gpio->client->adapter;
|
|
+
|
|
+ if (in_atomic() || irqs_disabled()) {
|
|
+ ret = rt_mutex_trylock(&adap->bus_lock);
|
|
+ if (!ret)
|
|
+ /* I2C activity is ongoing. */
|
|
+ return -EAGAIN;
|
|
+ } else {
|
|
+ rt_mutex_lock(&adap->bus_lock);
|
|
+ }
|
|
+
|
|
+ gpio->out |= (1 << offset);
|
|
+
|
|
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
|
|
+
|
|
+ rt_mutex_unlock(&adap->bus_lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
|
|
+{
|
|
+ int ret;
|
|
+ s32 value;
|
|
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
|
|
+ struct i2c_adapter *adap = gpio->client->adapter;
|
|
+
|
|
+ if (in_atomic() || irqs_disabled()) {
|
|
+ ret = rt_mutex_trylock(&adap->bus_lock);
|
|
+ if (!ret)
|
|
+ /* I2C activity is ongoing. */
|
|
+ return -EAGAIN;
|
|
+ } else {
|
|
+ rt_mutex_lock(&adap->bus_lock);
|
|
+ }
|
|
+
|
|
+ value = i2c_pld_read_byte(gpio->client->addr);
|
|
+
|
|
+ rt_mutex_unlock(&adap->bus_lock);
|
|
+
|
|
+ return (value < 0) ? 0 : (value & (1 << offset));
|
|
+}
|
|
+
|
|
+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
|
|
+ struct i2c_adapter *adap = gpio->client->adapter;
|
|
+
|
|
+ unsigned bit = 1 << offset;
|
|
+
|
|
+ if (in_atomic() || irqs_disabled()) {
|
|
+ ret = rt_mutex_trylock(&adap->bus_lock);
|
|
+ if (!ret)
|
|
+ /* I2C activity is ongoing. */
|
|
+ return -EAGAIN;
|
|
+ } else {
|
|
+ rt_mutex_lock(&adap->bus_lock);
|
|
+ }
|
|
+
|
|
+
|
|
+ if (value)
|
|
+ gpio->out |= bit;
|
|
+ else
|
|
+ gpio->out &= ~bit;
|
|
+
|
|
+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
|
|
+
|
|
+ rt_mutex_unlock(&adap->bus_lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
|
|
+{
|
|
+ gw_i2c_pld_output8(chip, offset, value);
|
|
+}
|
|
+
|
|
+/*-------------------------------------------------------------------------*/
|
|
+
|
|
+static int gw_i2c_pld_probe(struct i2c_client *client,
|
|
+ const struct i2c_device_id *id)
|
|
+{
|
|
+ struct gw_i2c_pld_platform_data *pdata;
|
|
+ struct gw_i2c_pld *gpio;
|
|
+ int status;
|
|
+
|
|
+ pdata = client->dev.platform_data;
|
|
+ if (!pdata)
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* Allocate, initialize, and register this gpio_chip. */
|
|
+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
|
|
+ if (!gpio)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ gpio->chip.base = pdata->gpio_base;
|
|
+ gpio->chip.can_sleep = 1;
|
|
+ gpio->chip.dev = &client->dev;
|
|
+ gpio->chip.owner = THIS_MODULE;
|
|
+
|
|
+ gpio->chip.ngpio = pdata->nr_gpio;
|
|
+ gpio->chip.direction_input = gw_i2c_pld_input8;
|
|
+ gpio->chip.get = gw_i2c_pld_get8;
|
|
+ gpio->chip.direction_output = gw_i2c_pld_output8;
|
|
+ gpio->chip.set = gw_i2c_pld_set8;
|
|
+
|
|
+ gpio->chip.label = client->name;
|
|
+
|
|
+ gpio->client = client;
|
|
+ i2c_set_clientdata(client, gpio);
|
|
+
|
|
+ gpio->out = 0xFF;
|
|
+
|
|
+ status = gpiochip_add(&gpio->chip);
|
|
+ if (status < 0)
|
|
+ goto fail;
|
|
+
|
|
+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
|
|
+ gpio->chip.base,
|
|
+ gpio->chip.base + gpio->chip.ngpio - 1,
|
|
+ client->name,
|
|
+ client->irq ? " (irq ignored)" : "");
|
|
+
|
|
+ /* Let platform code set up the GPIOs and their users.
|
|
+ * Now is the first time anyone could use them.
|
|
+ */
|
|
+ if (pdata->setup) {
|
|
+ status = pdata->setup(client,
|
|
+ gpio->chip.base, gpio->chip.ngpio,
|
|
+ pdata->context);
|
|
+ if (status < 0)
|
|
+ dev_warn(&client->dev, "setup --> %d\n", status);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+fail:
|
|
+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
|
|
+ status, client->name);
|
|
+ kfree(gpio);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int gw_i2c_pld_remove(struct i2c_client *client)
|
|
+{
|
|
+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
|
|
+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
|
|
+ int status = 0;
|
|
+
|
|
+ if (pdata->teardown) {
|
|
+ status = pdata->teardown(client,
|
|
+ gpio->chip.base, gpio->chip.ngpio,
|
|
+ pdata->context);
|
|
+ if (status < 0) {
|
|
+ dev_err(&client->dev, "%s --> %d\n",
|
|
+ "teardown", status);
|
|
+ return status;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ status = gpiochip_remove(&gpio->chip);
|
|
+ if (status == 0)
|
|
+ kfree(gpio);
|
|
+ else
|
|
+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static struct i2c_driver gw_i2c_pld_driver = {
|
|
+ .driver = {
|
|
+ .name = "gw_i2c_pld",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .probe = gw_i2c_pld_probe,
|
|
+ .remove = gw_i2c_pld_remove,
|
|
+ .id_table = gw_i2c_pld_id,
|
|
+};
|
|
+
|
|
+static int __init gw_i2c_pld_init(void)
|
|
+{
|
|
+ return i2c_add_driver(&gw_i2c_pld_driver);
|
|
+}
|
|
+module_init(gw_i2c_pld_init);
|
|
+
|
|
+static void __exit gw_i2c_pld_exit(void)
|
|
+{
|
|
+ i2c_del_driver(&gw_i2c_pld_driver);
|
|
+}
|
|
+module_exit(gw_i2c_pld_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Chris Lang");
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -348,6 +348,14 @@ config GPIO_RDC321X
|
|
Support for the RDC R321x SoC GPIOs over southbridge
|
|
PCI configuration space.
|
|
|
|
+config GPIO_GW_I2C_PLD
|
|
+ tristate "Gateworks I2C PLD GPIO Expander"
|
|
+ depends on I2C
|
|
+ help
|
|
+ Say yes here to provide access to the Gateworks I2C PLD GPIO
|
|
+ Expander. This is used at least on the GW2358-4.
|
|
+
|
|
+
|
|
comment "SPI GPIO expanders:"
|
|
|
|
config GPIO_MAX7301
|
|
--- a/drivers/gpio/Makefile
|
|
+++ b/drivers/gpio/Makefile
|
|
@@ -41,3 +41,4 @@ obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gp
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
|
|
obj-$(CONFIG_GPIO_SX150X) += sx150x.o
|
|
obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o
|
|
+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
|
|
--- /dev/null
|
|
+++ b/include/linux/i2c/gw_i2c_pld.h
|
|
@@ -0,0 +1,20 @@
|
|
+#ifndef __LINUX_GW_I2C_PLD_H
|
|
+#define __LINUX_GW_I2C_PLD_H
|
|
+
|
|
+/**
|
|
+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
|
|
+ */
|
|
+
|
|
+struct gw_i2c_pld_platform_data {
|
|
+ unsigned gpio_base;
|
|
+ unsigned nr_gpio;
|
|
+ int (*setup)(struct i2c_client *client,
|
|
+ int gpio, unsigned ngpio,
|
|
+ void *context);
|
|
+ int (*teardown)(struct i2c_client *client,
|
|
+ int gpio, unsigned ngpio,
|
|
+ void *context);
|
|
+ void *context;
|
|
+};
|
|
+
|
|
+#endif /* __LINUX_GW_I2C_PLD_H */
|